| #ifndef R819XUSB_CMDPKT_H |
| #define R819XUSB_CMDPKT_H |
| /* Different command packet have dedicated message length and definition. */ |
| #define CMPK_RX_TX_FB_SIZE sizeof(cmpk_txfb_t) //20 |
| #define CMPK_TX_SET_CONFIG_SIZE sizeof(cmpk_set_cfg_t) //16 |
| #define CMPK_BOTH_QUERY_CONFIG_SIZE sizeof(cmpk_set_cfg_t) //16 |
| #define CMPK_RX_TX_STS_SIZE sizeof(cmpk_tx_status_t)// |
| #define CMPK_RX_DBG_MSG_SIZE sizeof(cmpk_rx_dbginfo_t)// |
| #define CMPK_TX_RAHIS_SIZE sizeof(cmpk_tx_rahis_t) |
| |
| /* 2008/05/08 amy For USB constant. */ |
| #define ISR_TxBcnOk BIT27 // Transmit Beacon OK |
| #define ISR_TxBcnErr BIT26 // Transmit Beacon Error |
| #define ISR_BcnTimerIntr BIT13 // Beacon Timer Interrupt |
| |
| #if 0 |
| /* Define packet type. */ |
| typedef enum tag_packet_type |
| { |
| PACKET_BROADCAST, |
| PACKET_MULTICAST, |
| PACKET_UNICAST, |
| PACKET_TYPE_MAX |
| }cmpk_pkt_type_e; |
| #endif |
| |
| /* Define element ID of command packet. */ |
| |
| /*------------------------------Define structure----------------------------*/ |
| /* Define different command packet structure. */ |
| /* 1. RX side: TX feedback packet. */ |
| typedef struct tag_cmd_pkt_tx_feedback |
| { |
| // DWORD 0 |
| u8 element_id; /* Command packet type. */ |
| u8 length; /* Command packet length. */ |
| /* 2007/07/05 MH Change tx feedback info field. */ |
| /*------TX Feedback Info Field */ |
| u8 TID:4; /* */ |
| u8 fail_reason:3; /* */ |
| u8 tok:1; /* Transmit ok. */ |
| u8 reserve1:4; /* */ |
| u8 pkt_type:2; /* */ |
| u8 bandwidth:1; /* */ |
| u8 qos_pkt:1; /* */ |
| |
| // DWORD 1 |
| u8 reserve2; /* */ |
| /*------TX Feedback Info Field */ |
| u8 retry_cnt; /* */ |
| u16 pkt_id; /* */ |
| |
| // DWORD 3 |
| u16 seq_num; /* */ |
| u8 s_rate; /* Start rate. */ |
| u8 f_rate; /* Final rate. */ |
| |
| // DWORD 4 |
| u8 s_rts_rate; /* */ |
| u8 f_rts_rate; /* */ |
| u16 pkt_length; /* */ |
| |
| // DWORD 5 |
| u16 reserve3; /* */ |
| u16 duration; /* */ |
| }cmpk_txfb_t; |
| |
| /* 2. RX side: Interrupt status packet. It includes Beacon State, |
| Beacon Timer Interrupt and other useful informations in MAC ISR Reg. */ |
| typedef struct tag_cmd_pkt_interrupt_status |
| { |
| u8 element_id; /* Command packet type. */ |
| u8 length; /* Command packet length. */ |
| u16 reserve; |
| u32 interrupt_status; /* Interrupt Status. */ |
| }cmpk_intr_sta_t; |
| |
| |
| /* 3. TX side: Set configuration packet. */ |
| typedef struct tag_cmd_pkt_set_configuration |
| { |
| u8 element_id; /* Command packet type. */ |
| u8 length; /* Command packet length. */ |
| u16 reserve1; /* */ |
| u8 cfg_reserve1:3; |
| u8 cfg_size:2; /* Configuration info. */ |
| u8 cfg_type:2; /* Configuration info. */ |
| u8 cfg_action:1; /* Configuration info. */ |
| u8 cfg_reserve2; /* Configuration info. */ |
| u8 cfg_page:4; /* Configuration info. */ |
| u8 cfg_reserve3:4; /* Configuration info. */ |
| u8 cfg_offset; /* Configuration info. */ |
| u32 value; /* */ |
| u32 mask; /* */ |
| }cmpk_set_cfg_t; |
| |
| /* 4. Both side : TX/RX query configuraton packet. The query structure is the |
| same as set configuration. */ |
| #define cmpk_query_cfg_t cmpk_set_cfg_t |
| |
| /* 5. Multi packet feedback status. */ |
| typedef struct tag_tx_stats_feedback // PJ quick rxcmd 09042007 |
| { |
| // For endian transfer --> Driver will not the same as firmware structure. |
| // DW 0 |
| u16 reserve1; |
| u8 length; // Command packet length |
| u8 element_id; // Command packet type |
| |
| // DW 1 |
| u16 txfail; // Tx Fail count |
| u16 txok; // Tx ok count |
| |
| // DW 2 |
| u16 txmcok; // tx multicast |
| u16 txretry; // Tx Retry count |
| |
| // DW 3 |
| u16 txucok; // tx unicast |
| u16 txbcok; // tx broadcast |
| |
| // DW 4 |
| u16 txbcfail; // |
| u16 txmcfail; // |
| |
| // DW 5 |
| u16 reserve2; // |
| u16 txucfail; // |
| |
| // DW 6-8 |
| u32 txmclength; |
| u32 txbclength; |
| u32 txuclength; |
| |
| // DW 9 |
| u16 reserve3_23; |
| u8 reserve3_1; |
| u8 rate; |
| }__attribute__((packed)) cmpk_tx_status_t; |
| |
| /* 6. Debug feedback message. */ |
| /* 2007/10/23 MH Define RX debug message */ |
| typedef struct tag_rx_debug_message_feedback |
| { |
| // For endian transfer --> for driver |
| // DW 0 |
| u16 reserve1; |
| u8 length; // Command packet length |
| u8 element_id; // Command packet type |
| |
| // DW 1-?? |
| // Variable debug message. |
| |
| }cmpk_rx_dbginfo_t; |
| |
| /* 2008/03/20 MH Define transmit rate history. For big endian format. */ |
| typedef struct tag_tx_rate_history |
| { |
| // For endian transfer --> for driver |
| // DW 0 |
| u8 element_id; // Command packet type |
| u8 length; // Command packet length |
| u16 reserved1; |
| |
| // DW 1-2 CCK rate counter |
| u16 cck[4]; |
| |
| // DW 3-6 |
| u16 ofdm[8]; |
| |
| // DW 7-14 |
| //UINT16 MCS_BW0_SG0[16]; |
| |
| // DW 15-22 |
| //UINT16 MCS_BW1_SG0[16]; |
| |
| // DW 23-30 |
| //UINT16 MCS_BW0_SG1[16]; |
| |
| // DW 31-38 |
| //UINT16 MCS_BW1_SG1[16]; |
| |
| // DW 7-14 BW=0 SG=0 |
| // DW 15-22 BW=1 SG=0 |
| // DW 23-30 BW=0 SG=1 |
| // DW 31-38 BW=1 SG=1 |
| u16 ht_mcs[4][16]; |
| |
| }__attribute__((packed)) cmpk_tx_rahis_t; |
| |
| typedef enum tag_command_packet_directories |
| { |
| RX_TX_FEEDBACK = 0, |
| RX_INTERRUPT_STATUS = 1, |
| TX_SET_CONFIG = 2, |
| BOTH_QUERY_CONFIG = 3, |
| RX_TX_STATUS = 4, |
| RX_DBGINFO_FEEDBACK = 5, |
| RX_TX_PER_PKT_FEEDBACK = 6, |
| RX_TX_RATE_HISTORY = 7, |
| RX_CMD_ELE_MAX |
| }cmpk_element_e; |
| |
| extern u32 cmpk_message_handle_rx(struct net_device *dev, struct ieee80211_rx_stats * pstats); |
| |
| |
| #endif |