| /* |
| comedi/drivers/ni_mio_common.c |
| Hardware driver for DAQ-STC based boards |
| |
| COMEDI - Linux Control and Measurement Device Interface |
| Copyright (C) 1997-2001 David A. Schleef <ds@schleef.org> |
| Copyright (C) 2002-2006 Frank Mori Hess <fmhess@users.sourceforge.net> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| */ |
| |
| /* |
| This file is meant to be included by another file, e.g., |
| ni_atmio.c or ni_pcimio.c. |
| |
| Interrupt support originally added by Truxton Fulton |
| <trux@truxton.com> |
| |
| References (from ftp://ftp.natinst.com/support/manuals): |
| |
| 340747b.pdf AT-MIO E series Register Level Programmer Manual |
| 341079b.pdf PCI E Series RLPM |
| 340934b.pdf DAQ-STC reference manual |
| 67xx and 611x registers (from http://www.ni.com/pdf/daq/us) |
| release_ni611x.pdf |
| release_ni67xx.pdf |
| Other possibly relevant info: |
| |
| 320517c.pdf User manual (obsolete) |
| 320517f.pdf User manual (new) |
| 320889a.pdf delete |
| 320906c.pdf maximum signal ratings |
| 321066a.pdf about 16x |
| 321791a.pdf discontinuation of at-mio-16e-10 rev. c |
| 321808a.pdf about at-mio-16e-10 rev P |
| 321837a.pdf discontinuation of at-mio-16de-10 rev d |
| 321838a.pdf about at-mio-16de-10 rev N |
| |
| ISSUES: |
| |
| - the interrupt routine needs to be cleaned up |
| |
| 2006-02-07: S-Series PCI-6143: Support has been added but is not |
| fully tested as yet. Terry Barnaby, BEAM Ltd. |
| */ |
| |
| /* #define DEBUG_INTERRUPT */ |
| /* #define DEBUG_STATUS_A */ |
| /* #define DEBUG_STATUS_B */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/sched.h> |
| #include "8255.h" |
| #include "mite.h" |
| #include "comedi_fc.h" |
| |
| #ifndef MDPRINTK |
| #define MDPRINTK(format, args...) |
| #endif |
| |
| /* A timeout count */ |
| #define NI_TIMEOUT 1000 |
| static const unsigned old_RTSI_clock_channel = 7; |
| |
| /* Note: this table must match the ai_gain_* definitions */ |
| static const short ni_gainlkup[][16] = { |
| [ai_gain_16] = {0, 1, 2, 3, 4, 5, 6, 7, |
| 0x100, 0x101, 0x102, 0x103, 0x104, 0x105, 0x106, 0x107}, |
| [ai_gain_8] = {1, 2, 4, 7, 0x101, 0x102, 0x104, 0x107}, |
| [ai_gain_14] = {1, 2, 3, 4, 5, 6, 7, |
| 0x101, 0x102, 0x103, 0x104, 0x105, 0x106, 0x107}, |
| [ai_gain_4] = {0, 1, 4, 7}, |
| [ai_gain_611x] = {0x00a, 0x00b, 0x001, 0x002, |
| 0x003, 0x004, 0x005, 0x006}, |
| [ai_gain_622x] = {0, 1, 4, 5}, |
| [ai_gain_628x] = {1, 2, 3, 4, 5, 6, 7}, |
| [ai_gain_6143] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, |
| }; |
| |
| static const struct comedi_lrange range_ni_E_ai = { 16, { |
| RANGE(-10, 10), |
| RANGE(-5, 5), |
| RANGE(-2.5, 2.5), |
| RANGE(-1, 1), |
| RANGE(-0.5, 0.5), |
| RANGE(-0.25, 0.25), |
| RANGE(-0.1, 0.1), |
| RANGE(-0.05, 0.05), |
| RANGE(0, 20), |
| RANGE(0, 10), |
| RANGE(0, 5), |
| RANGE(0, 2), |
| RANGE(0, 1), |
| RANGE(0, 0.5), |
| RANGE(0, 0.2), |
| RANGE(0, 0.1), |
| } |
| }; |
| |
| static const struct comedi_lrange range_ni_E_ai_limited = { 8, { |
| RANGE(-10, 10), |
| RANGE(-5, 5), |
| RANGE(-1, 1), |
| RANGE(-0.1, |
| 0.1), |
| RANGE(0, 10), |
| RANGE(0, 5), |
| RANGE(0, 1), |
| RANGE(0, 0.1), |
| } |
| }; |
| |
| static const struct comedi_lrange range_ni_E_ai_limited14 = { 14, { |
| RANGE(-10, |
| 10), |
| RANGE(-5, 5), |
| RANGE(-2, 2), |
| RANGE(-1, 1), |
| RANGE(-0.5, |
| 0.5), |
| RANGE(-0.2, |
| 0.2), |
| RANGE(-0.1, |
| 0.1), |
| RANGE(0, 10), |
| RANGE(0, 5), |
| RANGE(0, 2), |
| RANGE(0, 1), |
| RANGE(0, |
| 0.5), |
| RANGE(0, |
| 0.2), |
| RANGE(0, |
| 0.1), |
| } |
| }; |
| |
| static const struct comedi_lrange range_ni_E_ai_bipolar4 = { 4, { |
| RANGE(-10, 10), |
| RANGE(-5, 5), |
| RANGE(-0.5, |
| 0.5), |
| RANGE(-0.05, |
| 0.05), |
| } |
| }; |
| |
| static const struct comedi_lrange range_ni_E_ai_611x = { 8, { |
| RANGE(-50, 50), |
| RANGE(-20, 20), |
| RANGE(-10, 10), |
| RANGE(-5, 5), |
| RANGE(-2, 2), |
| RANGE(-1, 1), |
| RANGE(-0.5, 0.5), |
| RANGE(-0.2, 0.2), |
| } |
| }; |
| |
| static const struct comedi_lrange range_ni_M_ai_622x = { 4, { |
| RANGE(-10, 10), |
| RANGE(-5, 5), |
| RANGE(-1, 1), |
| RANGE(-0.2, 0.2), |
| } |
| }; |
| |
| static const struct comedi_lrange range_ni_M_ai_628x = { 7, { |
| RANGE(-10, 10), |
| RANGE(-5, 5), |
| RANGE(-2, 2), |
| RANGE(-1, 1), |
| RANGE(-0.5, 0.5), |
| RANGE(-0.2, 0.2), |
| RANGE(-0.1, 0.1), |
| } |
| }; |
| |
| static const struct comedi_lrange range_ni_S_ai_6143 = { 1, { |
| RANGE(-5, +5), |
| } |
| }; |
| |
| static const struct comedi_lrange range_ni_E_ao_ext = { 4, { |
| RANGE(-10, 10), |
| RANGE(0, 10), |
| RANGE_ext(-1, 1), |
| RANGE_ext(0, 1), |
| } |
| }; |
| |
| static const struct comedi_lrange *const ni_range_lkup[] = { |
| [ai_gain_16] = &range_ni_E_ai, |
| [ai_gain_8] = &range_ni_E_ai_limited, |
| [ai_gain_14] = &range_ni_E_ai_limited14, |
| [ai_gain_4] = &range_ni_E_ai_bipolar4, |
| [ai_gain_611x] = &range_ni_E_ai_611x, |
| [ai_gain_622x] = &range_ni_M_ai_622x, |
| [ai_gain_628x] = &range_ni_M_ai_628x, |
| [ai_gain_6143] = &range_ni_S_ai_6143 |
| }; |
| |
| static int ni_dio_insn_config(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| static int ni_dio_insn_bits(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| static int ni_cdio_cmdtest(struct comedi_device *dev, |
| struct comedi_subdevice *s, struct comedi_cmd *cmd); |
| static int ni_cdio_cmd(struct comedi_device *dev, struct comedi_subdevice *s); |
| static int ni_cdio_cancel(struct comedi_device *dev, |
| struct comedi_subdevice *s); |
| static void handle_cdio_interrupt(struct comedi_device *dev); |
| static int ni_cdo_inttrig(struct comedi_device *dev, struct comedi_subdevice *s, |
| unsigned int trignum); |
| |
| static int ni_serial_insn_config(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| static int ni_serial_hw_readwrite8(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| unsigned char data_out, |
| unsigned char *data_in); |
| static int ni_serial_sw_readwrite8(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| unsigned char data_out, |
| unsigned char *data_in); |
| |
| static int ni_calib_insn_read(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| static int ni_calib_insn_write(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| |
| static int ni_eeprom_insn_read(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| static int ni_m_series_eeprom_insn_read(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, |
| unsigned int *data); |
| |
| static int ni_pfi_insn_bits(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| static int ni_pfi_insn_config(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| static unsigned ni_old_get_pfi_routing(struct comedi_device *dev, |
| unsigned chan); |
| |
| static void ni_rtsi_init(struct comedi_device *dev); |
| static int ni_rtsi_insn_bits(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| static int ni_rtsi_insn_config(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| |
| static void caldac_setup(struct comedi_device *dev, struct comedi_subdevice *s); |
| static int ni_read_eeprom(struct comedi_device *dev, int addr); |
| |
| #ifdef DEBUG_STATUS_A |
| static void ni_mio_print_status_a(int status); |
| #else |
| #define ni_mio_print_status_a(a) |
| #endif |
| #ifdef DEBUG_STATUS_B |
| static void ni_mio_print_status_b(int status); |
| #else |
| #define ni_mio_print_status_b(a) |
| #endif |
| |
| static int ni_ai_reset(struct comedi_device *dev, struct comedi_subdevice *s); |
| #ifndef PCIDMA |
| static void ni_handle_fifo_half_full(struct comedi_device *dev); |
| static int ni_ao_fifo_half_empty(struct comedi_device *dev, |
| struct comedi_subdevice *s); |
| #endif |
| static void ni_handle_fifo_dregs(struct comedi_device *dev); |
| static int ni_ai_inttrig(struct comedi_device *dev, struct comedi_subdevice *s, |
| unsigned int trignum); |
| static void ni_load_channelgain_list(struct comedi_device *dev, |
| unsigned int n_chan, unsigned int *list); |
| static void shutdown_ai_command(struct comedi_device *dev); |
| |
| static int ni_ao_inttrig(struct comedi_device *dev, struct comedi_subdevice *s, |
| unsigned int trignum); |
| |
| static int ni_ao_reset(struct comedi_device *dev, struct comedi_subdevice *s); |
| |
| static int ni_8255_callback(int dir, int port, int data, unsigned long arg); |
| |
| static int ni_gpct_insn_write(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| static int ni_gpct_insn_read(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| static int ni_gpct_insn_config(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| static int ni_gpct_cmd(struct comedi_device *dev, struct comedi_subdevice *s); |
| static int ni_gpct_cmdtest(struct comedi_device *dev, |
| struct comedi_subdevice *s, struct comedi_cmd *cmd); |
| static int ni_gpct_cancel(struct comedi_device *dev, |
| struct comedi_subdevice *s); |
| static void handle_gpct_interrupt(struct comedi_device *dev, |
| unsigned short counter_index); |
| |
| static int init_cs5529(struct comedi_device *dev); |
| static int cs5529_do_conversion(struct comedi_device *dev, |
| unsigned short *data); |
| static int cs5529_ai_insn_read(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| #ifdef NI_CS5529_DEBUG |
| static unsigned int cs5529_config_read(struct comedi_device *dev, |
| unsigned int reg_select_bits); |
| #endif |
| static void cs5529_config_write(struct comedi_device *dev, unsigned int value, |
| unsigned int reg_select_bits); |
| |
| static int ni_m_series_pwm_config(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| static int ni_6143_pwm_config(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data); |
| |
| static int ni_set_master_clock(struct comedi_device *dev, unsigned source, |
| unsigned period_ns); |
| static void ack_a_interrupt(struct comedi_device *dev, unsigned short a_status); |
| static void ack_b_interrupt(struct comedi_device *dev, unsigned short b_status); |
| |
| enum aimodes { |
| AIMODE_NONE = 0, |
| AIMODE_HALF_FULL = 1, |
| AIMODE_SCAN = 2, |
| AIMODE_SAMPLE = 3, |
| }; |
| |
| enum ni_common_subdevices { |
| NI_AI_SUBDEV, |
| NI_AO_SUBDEV, |
| NI_DIO_SUBDEV, |
| NI_8255_DIO_SUBDEV, |
| NI_UNUSED_SUBDEV, |
| NI_CALIBRATION_SUBDEV, |
| NI_EEPROM_SUBDEV, |
| NI_PFI_DIO_SUBDEV, |
| NI_CS5529_CALIBRATION_SUBDEV, |
| NI_SERIAL_SUBDEV, |
| NI_RTSI_SUBDEV, |
| NI_GPCT0_SUBDEV, |
| NI_GPCT1_SUBDEV, |
| NI_FREQ_OUT_SUBDEV, |
| NI_NUM_SUBDEVICES |
| }; |
| static inline unsigned NI_GPCT_SUBDEV(unsigned counter_index) |
| { |
| switch (counter_index) { |
| case 0: |
| return NI_GPCT0_SUBDEV; |
| break; |
| case 1: |
| return NI_GPCT1_SUBDEV; |
| break; |
| default: |
| break; |
| } |
| BUG(); |
| return NI_GPCT0_SUBDEV; |
| } |
| |
| enum timebase_nanoseconds { |
| TIMEBASE_1_NS = 50, |
| TIMEBASE_2_NS = 10000 |
| }; |
| |
| #define SERIAL_DISABLED 0 |
| #define SERIAL_600NS 600 |
| #define SERIAL_1_2US 1200 |
| #define SERIAL_10US 10000 |
| |
| static const int num_adc_stages_611x = 3; |
| |
| static void handle_a_interrupt(struct comedi_device *dev, unsigned short status, |
| unsigned ai_mite_status); |
| static void handle_b_interrupt(struct comedi_device *dev, unsigned short status, |
| unsigned ao_mite_status); |
| static void get_last_sample_611x(struct comedi_device *dev); |
| static void get_last_sample_6143(struct comedi_device *dev); |
| |
| static inline void ni_set_bitfield(struct comedi_device *dev, int reg, |
| unsigned bit_mask, unsigned bit_values) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags); |
| switch (reg) { |
| case Interrupt_A_Enable_Register: |
| devpriv->int_a_enable_reg &= ~bit_mask; |
| devpriv->int_a_enable_reg |= bit_values & bit_mask; |
| devpriv->stc_writew(dev, devpriv->int_a_enable_reg, |
| Interrupt_A_Enable_Register); |
| break; |
| case Interrupt_B_Enable_Register: |
| devpriv->int_b_enable_reg &= ~bit_mask; |
| devpriv->int_b_enable_reg |= bit_values & bit_mask; |
| devpriv->stc_writew(dev, devpriv->int_b_enable_reg, |
| Interrupt_B_Enable_Register); |
| break; |
| case IO_Bidirection_Pin_Register: |
| devpriv->io_bidirection_pin_reg &= ~bit_mask; |
| devpriv->io_bidirection_pin_reg |= bit_values & bit_mask; |
| devpriv->stc_writew(dev, devpriv->io_bidirection_pin_reg, |
| IO_Bidirection_Pin_Register); |
| break; |
| case AI_AO_Select: |
| devpriv->ai_ao_select_reg &= ~bit_mask; |
| devpriv->ai_ao_select_reg |= bit_values & bit_mask; |
| ni_writeb(devpriv->ai_ao_select_reg, AI_AO_Select); |
| break; |
| case G0_G1_Select: |
| devpriv->g0_g1_select_reg &= ~bit_mask; |
| devpriv->g0_g1_select_reg |= bit_values & bit_mask; |
| ni_writeb(devpriv->g0_g1_select_reg, G0_G1_Select); |
| break; |
| default: |
| printk("Warning %s() called with invalid register\n", __func__); |
| printk("reg is %d\n", reg); |
| break; |
| } |
| mmiowb(); |
| spin_unlock_irqrestore(&devpriv->soft_reg_copy_lock, flags); |
| } |
| |
| #ifdef PCIDMA |
| static int ni_ai_drain_dma(struct comedi_device *dev); |
| |
| /* DMA channel setup */ |
| |
| /* negative channel means no channel */ |
| static inline void ni_set_ai_dma_channel(struct comedi_device *dev, int channel) |
| { |
| unsigned bitfield; |
| |
| if (channel >= 0) { |
| bitfield = |
| (ni_stc_dma_channel_select_bitfield(channel) << |
| AI_DMA_Select_Shift) & AI_DMA_Select_Mask; |
| } else { |
| bitfield = 0; |
| } |
| ni_set_bitfield(dev, AI_AO_Select, AI_DMA_Select_Mask, bitfield); |
| } |
| |
| /* negative channel means no channel */ |
| static inline void ni_set_ao_dma_channel(struct comedi_device *dev, int channel) |
| { |
| unsigned bitfield; |
| |
| if (channel >= 0) { |
| bitfield = |
| (ni_stc_dma_channel_select_bitfield(channel) << |
| AO_DMA_Select_Shift) & AO_DMA_Select_Mask; |
| } else { |
| bitfield = 0; |
| } |
| ni_set_bitfield(dev, AI_AO_Select, AO_DMA_Select_Mask, bitfield); |
| } |
| |
| /* negative mite_channel means no channel */ |
| static inline void ni_set_gpct_dma_channel(struct comedi_device *dev, |
| unsigned gpct_index, |
| int mite_channel) |
| { |
| unsigned bitfield; |
| |
| if (mite_channel >= 0) { |
| bitfield = GPCT_DMA_Select_Bits(gpct_index, mite_channel); |
| } else { |
| bitfield = 0; |
| } |
| ni_set_bitfield(dev, G0_G1_Select, GPCT_DMA_Select_Mask(gpct_index), |
| bitfield); |
| } |
| |
| /* negative mite_channel means no channel */ |
| static inline void ni_set_cdo_dma_channel(struct comedi_device *dev, |
| int mite_channel) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&devpriv->soft_reg_copy_lock, flags); |
| devpriv->cdio_dma_select_reg &= ~CDO_DMA_Select_Mask; |
| if (mite_channel >= 0) { |
| /*XXX just guessing ni_stc_dma_channel_select_bitfield() returns the right bits, |
| under the assumption the cdio dma selection works just like ai/ao/gpct. |
| Definitely works for dma channels 0 and 1. */ |
| devpriv->cdio_dma_select_reg |= |
| (ni_stc_dma_channel_select_bitfield(mite_channel) << |
| CDO_DMA_Select_Shift) & CDO_DMA_Select_Mask; |
| } |
| ni_writeb(devpriv->cdio_dma_select_reg, M_Offset_CDIO_DMA_Select); |
| mmiowb(); |
| spin_unlock_irqrestore(&devpriv->soft_reg_copy_lock, flags); |
| } |
| |
| static int ni_request_ai_mite_channel(struct comedi_device *dev) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&devpriv->mite_channel_lock, flags); |
| BUG_ON(devpriv->ai_mite_chan); |
| devpriv->ai_mite_chan = |
| mite_request_channel(devpriv->mite, devpriv->ai_mite_ring); |
| if (devpriv->ai_mite_chan == NULL) { |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| comedi_error(dev, |
| "failed to reserve mite dma channel for analog input."); |
| return -EBUSY; |
| } |
| devpriv->ai_mite_chan->dir = COMEDI_INPUT; |
| ni_set_ai_dma_channel(dev, devpriv->ai_mite_chan->channel); |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| return 0; |
| } |
| |
| static int ni_request_ao_mite_channel(struct comedi_device *dev) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&devpriv->mite_channel_lock, flags); |
| BUG_ON(devpriv->ao_mite_chan); |
| devpriv->ao_mite_chan = |
| mite_request_channel(devpriv->mite, devpriv->ao_mite_ring); |
| if (devpriv->ao_mite_chan == NULL) { |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| comedi_error(dev, |
| "failed to reserve mite dma channel for analog outut."); |
| return -EBUSY; |
| } |
| devpriv->ao_mite_chan->dir = COMEDI_OUTPUT; |
| ni_set_ao_dma_channel(dev, devpriv->ao_mite_chan->channel); |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| return 0; |
| } |
| |
| static int ni_request_gpct_mite_channel(struct comedi_device *dev, |
| unsigned gpct_index, |
| enum comedi_io_direction direction) |
| { |
| unsigned long flags; |
| struct mite_channel *mite_chan; |
| |
| BUG_ON(gpct_index >= NUM_GPCT); |
| spin_lock_irqsave(&devpriv->mite_channel_lock, flags); |
| BUG_ON(devpriv->counter_dev->counters[gpct_index].mite_chan); |
| mite_chan = |
| mite_request_channel(devpriv->mite, |
| devpriv->gpct_mite_ring[gpct_index]); |
| if (mite_chan == NULL) { |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| comedi_error(dev, |
| "failed to reserve mite dma channel for counter."); |
| return -EBUSY; |
| } |
| mite_chan->dir = direction; |
| ni_tio_set_mite_channel(&devpriv->counter_dev->counters[gpct_index], |
| mite_chan); |
| ni_set_gpct_dma_channel(dev, gpct_index, mite_chan->channel); |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| return 0; |
| } |
| |
| #endif /* PCIDMA */ |
| |
| static int ni_request_cdo_mite_channel(struct comedi_device *dev) |
| { |
| #ifdef PCIDMA |
| unsigned long flags; |
| |
| spin_lock_irqsave(&devpriv->mite_channel_lock, flags); |
| BUG_ON(devpriv->cdo_mite_chan); |
| devpriv->cdo_mite_chan = |
| mite_request_channel(devpriv->mite, devpriv->cdo_mite_ring); |
| if (devpriv->cdo_mite_chan == NULL) { |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| comedi_error(dev, |
| "failed to reserve mite dma channel for correlated digital outut."); |
| return -EBUSY; |
| } |
| devpriv->cdo_mite_chan->dir = COMEDI_OUTPUT; |
| ni_set_cdo_dma_channel(dev, devpriv->cdo_mite_chan->channel); |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| #endif /* PCIDMA */ |
| return 0; |
| } |
| |
| static void ni_release_ai_mite_channel(struct comedi_device *dev) |
| { |
| #ifdef PCIDMA |
| unsigned long flags; |
| |
| spin_lock_irqsave(&devpriv->mite_channel_lock, flags); |
| if (devpriv->ai_mite_chan) { |
| ni_set_ai_dma_channel(dev, -1); |
| mite_release_channel(devpriv->ai_mite_chan); |
| devpriv->ai_mite_chan = NULL; |
| } |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| #endif /* PCIDMA */ |
| } |
| |
| static void ni_release_ao_mite_channel(struct comedi_device *dev) |
| { |
| #ifdef PCIDMA |
| unsigned long flags; |
| |
| spin_lock_irqsave(&devpriv->mite_channel_lock, flags); |
| if (devpriv->ao_mite_chan) { |
| ni_set_ao_dma_channel(dev, -1); |
| mite_release_channel(devpriv->ao_mite_chan); |
| devpriv->ao_mite_chan = NULL; |
| } |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| #endif /* PCIDMA */ |
| } |
| |
| void ni_release_gpct_mite_channel(struct comedi_device *dev, |
| unsigned gpct_index) |
| { |
| #ifdef PCIDMA |
| unsigned long flags; |
| |
| BUG_ON(gpct_index >= NUM_GPCT); |
| spin_lock_irqsave(&devpriv->mite_channel_lock, flags); |
| if (devpriv->counter_dev->counters[gpct_index].mite_chan) { |
| struct mite_channel *mite_chan = |
| devpriv->counter_dev->counters[gpct_index].mite_chan; |
| |
| ni_set_gpct_dma_channel(dev, gpct_index, -1); |
| ni_tio_set_mite_channel(&devpriv-> |
| counter_dev->counters[gpct_index], |
| NULL); |
| mite_release_channel(mite_chan); |
| } |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| #endif /* PCIDMA */ |
| } |
| |
| static void ni_release_cdo_mite_channel(struct comedi_device *dev) |
| { |
| #ifdef PCIDMA |
| unsigned long flags; |
| |
| spin_lock_irqsave(&devpriv->mite_channel_lock, flags); |
| if (devpriv->cdo_mite_chan) { |
| ni_set_cdo_dma_channel(dev, -1); |
| mite_release_channel(devpriv->cdo_mite_chan); |
| devpriv->cdo_mite_chan = NULL; |
| } |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| #endif /* PCIDMA */ |
| } |
| |
| /* e-series boards use the second irq signals to generate dma requests for their counters */ |
| #ifdef PCIDMA |
| static void ni_e_series_enable_second_irq(struct comedi_device *dev, |
| unsigned gpct_index, short enable) |
| { |
| if (boardtype.reg_type & ni_reg_m_series_mask) |
| return; |
| switch (gpct_index) { |
| case 0: |
| if (enable) { |
| devpriv->stc_writew(dev, G0_Gate_Second_Irq_Enable, |
| Second_IRQ_A_Enable_Register); |
| } else { |
| devpriv->stc_writew(dev, 0, |
| Second_IRQ_A_Enable_Register); |
| } |
| break; |
| case 1: |
| if (enable) { |
| devpriv->stc_writew(dev, G1_Gate_Second_Irq_Enable, |
| Second_IRQ_B_Enable_Register); |
| } else { |
| devpriv->stc_writew(dev, 0, |
| Second_IRQ_B_Enable_Register); |
| } |
| break; |
| default: |
| BUG(); |
| break; |
| } |
| } |
| #endif /* PCIDMA */ |
| |
| static void ni_clear_ai_fifo(struct comedi_device *dev) |
| { |
| if (boardtype.reg_type == ni_reg_6143) { |
| /* Flush the 6143 data FIFO */ |
| ni_writel(0x10, AIFIFO_Control_6143); /* Flush fifo */ |
| ni_writel(0x00, AIFIFO_Control_6143); /* Flush fifo */ |
| while (ni_readl(AIFIFO_Status_6143) & 0x10) ; /* Wait for complete */ |
| } else { |
| devpriv->stc_writew(dev, 1, ADC_FIFO_Clear); |
| if (boardtype.reg_type == ni_reg_625x) { |
| ni_writeb(0, M_Offset_Static_AI_Control(0)); |
| ni_writeb(1, M_Offset_Static_AI_Control(0)); |
| #if 0 |
| /* the NI example code does 3 convert pulses for 625x boards, |
| but that appears to be wrong in practice. */ |
| devpriv->stc_writew(dev, AI_CONVERT_Pulse, |
| AI_Command_1_Register); |
| devpriv->stc_writew(dev, AI_CONVERT_Pulse, |
| AI_Command_1_Register); |
| devpriv->stc_writew(dev, AI_CONVERT_Pulse, |
| AI_Command_1_Register); |
| #endif |
| } |
| } |
| } |
| |
| static void win_out2(struct comedi_device *dev, uint32_t data, int reg) |
| { |
| devpriv->stc_writew(dev, data >> 16, reg); |
| devpriv->stc_writew(dev, data & 0xffff, reg + 1); |
| } |
| |
| static uint32_t win_in2(struct comedi_device *dev, int reg) |
| { |
| uint32_t bits; |
| bits = devpriv->stc_readw(dev, reg) << 16; |
| bits |= devpriv->stc_readw(dev, reg + 1); |
| return bits; |
| } |
| |
| #define ao_win_out(data, addr) ni_ao_win_outw(dev, data, addr) |
| static inline void ni_ao_win_outw(struct comedi_device *dev, uint16_t data, |
| int addr) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&devpriv->window_lock, flags); |
| ni_writew(addr, AO_Window_Address_611x); |
| ni_writew(data, AO_Window_Data_611x); |
| spin_unlock_irqrestore(&devpriv->window_lock, flags); |
| } |
| |
| static inline void ni_ao_win_outl(struct comedi_device *dev, uint32_t data, |
| int addr) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&devpriv->window_lock, flags); |
| ni_writew(addr, AO_Window_Address_611x); |
| ni_writel(data, AO_Window_Data_611x); |
| spin_unlock_irqrestore(&devpriv->window_lock, flags); |
| } |
| |
| static inline unsigned short ni_ao_win_inw(struct comedi_device *dev, int addr) |
| { |
| unsigned long flags; |
| unsigned short data; |
| |
| spin_lock_irqsave(&devpriv->window_lock, flags); |
| ni_writew(addr, AO_Window_Address_611x); |
| data = ni_readw(AO_Window_Data_611x); |
| spin_unlock_irqrestore(&devpriv->window_lock, flags); |
| return data; |
| } |
| |
| /* ni_set_bits( ) allows different parts of the ni_mio_common driver to |
| * share registers (such as Interrupt_A_Register) without interfering with |
| * each other. |
| * |
| * NOTE: the switch/case statements are optimized out for a constant argument |
| * so this is actually quite fast--- If you must wrap another function around this |
| * make it inline to avoid a large speed penalty. |
| * |
| * value should only be 1 or 0. |
| */ |
| static inline void ni_set_bits(struct comedi_device *dev, int reg, |
| unsigned bits, unsigned value) |
| { |
| unsigned bit_values; |
| |
| if (value) |
| bit_values = bits; |
| else |
| bit_values = 0; |
| ni_set_bitfield(dev, reg, bits, bit_values); |
| } |
| |
| static irqreturn_t ni_E_interrupt(int irq, void *d) |
| { |
| struct comedi_device *dev = d; |
| unsigned short a_status; |
| unsigned short b_status; |
| unsigned int ai_mite_status = 0; |
| unsigned int ao_mite_status = 0; |
| unsigned long flags; |
| #ifdef PCIDMA |
| struct mite_struct *mite = devpriv->mite; |
| #endif |
| |
| if (dev->attached == 0) |
| return IRQ_NONE; |
| smp_mb(); /* make sure dev->attached is checked before handler does anything else. */ |
| |
| /* lock to avoid race with comedi_poll */ |
| spin_lock_irqsave(&dev->spinlock, flags); |
| a_status = devpriv->stc_readw(dev, AI_Status_1_Register); |
| b_status = devpriv->stc_readw(dev, AO_Status_1_Register); |
| #ifdef PCIDMA |
| if (mite) { |
| unsigned long flags_too; |
| |
| spin_lock_irqsave(&devpriv->mite_channel_lock, flags_too); |
| if (devpriv->ai_mite_chan) { |
| ai_mite_status = mite_get_status(devpriv->ai_mite_chan); |
| if (ai_mite_status & CHSR_LINKC) |
| writel(CHOR_CLRLC, |
| devpriv->mite->mite_io_addr + |
| MITE_CHOR(devpriv-> |
| ai_mite_chan->channel)); |
| } |
| if (devpriv->ao_mite_chan) { |
| ao_mite_status = mite_get_status(devpriv->ao_mite_chan); |
| if (ao_mite_status & CHSR_LINKC) |
| writel(CHOR_CLRLC, |
| mite->mite_io_addr + |
| MITE_CHOR(devpriv-> |
| ao_mite_chan->channel)); |
| } |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags_too); |
| } |
| #endif |
| ack_a_interrupt(dev, a_status); |
| ack_b_interrupt(dev, b_status); |
| if ((a_status & Interrupt_A_St) || (ai_mite_status & CHSR_INT)) |
| handle_a_interrupt(dev, a_status, ai_mite_status); |
| if ((b_status & Interrupt_B_St) || (ao_mite_status & CHSR_INT)) |
| handle_b_interrupt(dev, b_status, ao_mite_status); |
| handle_gpct_interrupt(dev, 0); |
| handle_gpct_interrupt(dev, 1); |
| handle_cdio_interrupt(dev); |
| |
| spin_unlock_irqrestore(&dev->spinlock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| #ifdef PCIDMA |
| static void ni_sync_ai_dma(struct comedi_device *dev) |
| { |
| struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&devpriv->mite_channel_lock, flags); |
| if (devpriv->ai_mite_chan) |
| mite_sync_input_dma(devpriv->ai_mite_chan, s->async); |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| } |
| |
| static void mite_handle_b_linkc(struct mite_struct *mite, |
| struct comedi_device *dev) |
| { |
| struct comedi_subdevice *s = dev->subdevices + NI_AO_SUBDEV; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&devpriv->mite_channel_lock, flags); |
| if (devpriv->ao_mite_chan) { |
| mite_sync_output_dma(devpriv->ao_mite_chan, s->async); |
| } |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| } |
| |
| static int ni_ao_wait_for_dma_load(struct comedi_device *dev) |
| { |
| static const int timeout = 10000; |
| int i; |
| for (i = 0; i < timeout; i++) { |
| unsigned short b_status; |
| |
| b_status = devpriv->stc_readw(dev, AO_Status_1_Register); |
| if (b_status & AO_FIFO_Half_Full_St) |
| break; |
| /* if we poll too often, the pci bus activity seems |
| to slow the dma transfer down */ |
| udelay(10); |
| } |
| if (i == timeout) { |
| comedi_error(dev, "timed out waiting for dma load"); |
| return -EPIPE; |
| } |
| return 0; |
| } |
| |
| #endif /* PCIDMA */ |
| static void ni_handle_eos(struct comedi_device *dev, struct comedi_subdevice *s) |
| { |
| if (devpriv->aimode == AIMODE_SCAN) { |
| #ifdef PCIDMA |
| static const int timeout = 10; |
| int i; |
| |
| for (i = 0; i < timeout; i++) { |
| ni_sync_ai_dma(dev); |
| if ((s->async->events & COMEDI_CB_EOS)) |
| break; |
| udelay(1); |
| } |
| #else |
| ni_handle_fifo_dregs(dev); |
| s->async->events |= COMEDI_CB_EOS; |
| #endif |
| } |
| /* handle special case of single scan using AI_End_On_End_Of_Scan */ |
| if ((devpriv->ai_cmd2 & AI_End_On_End_Of_Scan)) { |
| shutdown_ai_command(dev); |
| } |
| } |
| |
| static void shutdown_ai_command(struct comedi_device *dev) |
| { |
| struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV; |
| |
| #ifdef PCIDMA |
| ni_ai_drain_dma(dev); |
| #endif |
| ni_handle_fifo_dregs(dev); |
| get_last_sample_611x(dev); |
| get_last_sample_6143(dev); |
| |
| s->async->events |= COMEDI_CB_EOA; |
| } |
| |
| static void ni_event(struct comedi_device *dev, struct comedi_subdevice *s) |
| { |
| if (s-> |
| async->events & (COMEDI_CB_ERROR | COMEDI_CB_OVERFLOW | |
| COMEDI_CB_EOA)) { |
| switch (s - dev->subdevices) { |
| case NI_AI_SUBDEV: |
| ni_ai_reset(dev, s); |
| break; |
| case NI_AO_SUBDEV: |
| ni_ao_reset(dev, s); |
| break; |
| case NI_GPCT0_SUBDEV: |
| case NI_GPCT1_SUBDEV: |
| ni_gpct_cancel(dev, s); |
| break; |
| case NI_DIO_SUBDEV: |
| ni_cdio_cancel(dev, s); |
| break; |
| default: |
| break; |
| } |
| } |
| comedi_event(dev, s); |
| } |
| |
| static void handle_gpct_interrupt(struct comedi_device *dev, |
| unsigned short counter_index) |
| { |
| #ifdef PCIDMA |
| struct comedi_subdevice *s = |
| dev->subdevices + NI_GPCT_SUBDEV(counter_index); |
| |
| ni_tio_handle_interrupt(&devpriv->counter_dev->counters[counter_index], |
| s); |
| if (s->async->events) |
| ni_event(dev, s); |
| #endif |
| } |
| |
| static void ack_a_interrupt(struct comedi_device *dev, unsigned short a_status) |
| { |
| unsigned short ack = 0; |
| |
| if (a_status & AI_SC_TC_St) { |
| ack |= AI_SC_TC_Interrupt_Ack; |
| } |
| if (a_status & AI_START1_St) { |
| ack |= AI_START1_Interrupt_Ack; |
| } |
| if (a_status & AI_START_St) { |
| ack |= AI_START_Interrupt_Ack; |
| } |
| if (a_status & AI_STOP_St) { |
| /* not sure why we used to ack the START here also, instead of doing it independently. Frank Hess 2007-07-06 */ |
| ack |= AI_STOP_Interrupt_Ack /*| AI_START_Interrupt_Ack */ ; |
| } |
| if (ack) |
| devpriv->stc_writew(dev, ack, Interrupt_A_Ack_Register); |
| } |
| |
| static void handle_a_interrupt(struct comedi_device *dev, unsigned short status, |
| unsigned ai_mite_status) |
| { |
| struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV; |
| |
| /* 67xx boards don't have ai subdevice, but their gpct0 might generate an a interrupt */ |
| if (s->type == COMEDI_SUBD_UNUSED) |
| return; |
| |
| #ifdef DEBUG_INTERRUPT |
| printk |
| ("ni_mio_common: interrupt: a_status=%04x ai_mite_status=%08x\n", |
| status, ai_mite_status); |
| ni_mio_print_status_a(status); |
| #endif |
| #ifdef PCIDMA |
| if (ai_mite_status & CHSR_LINKC) { |
| ni_sync_ai_dma(dev); |
| } |
| |
| if (ai_mite_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_MRDY | |
| CHSR_DRDY | CHSR_DRQ1 | CHSR_DRQ0 | CHSR_ERROR | |
| CHSR_SABORT | CHSR_XFERR | CHSR_LxERR_mask)) { |
| printk |
| ("unknown mite interrupt, ack! (ai_mite_status=%08x)\n", |
| ai_mite_status); |
| /* mite_print_chsr(ai_mite_status); */ |
| s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA; |
| /* disable_irq(dev->irq); */ |
| } |
| #endif |
| |
| /* test for all uncommon interrupt events at the same time */ |
| if (status & (AI_Overrun_St | AI_Overflow_St | AI_SC_TC_Error_St | |
| AI_SC_TC_St | AI_START1_St)) { |
| if (status == 0xffff) { |
| printk |
| ("ni_mio_common: a_status=0xffff. Card removed?\n"); |
| /* we probably aren't even running a command now, |
| * so it's a good idea to be careful. */ |
| if (comedi_get_subdevice_runflags(s) & SRF_RUNNING) { |
| s->async->events |= |
| COMEDI_CB_ERROR | COMEDI_CB_EOA; |
| ni_event(dev, s); |
| } |
| return; |
| } |
| if (status & (AI_Overrun_St | AI_Overflow_St | |
| AI_SC_TC_Error_St)) { |
| printk("ni_mio_common: ai error a_status=%04x\n", |
| status); |
| ni_mio_print_status_a(status); |
| |
| shutdown_ai_command(dev); |
| |
| s->async->events |= COMEDI_CB_ERROR; |
| if (status & (AI_Overrun_St | AI_Overflow_St)) |
| s->async->events |= COMEDI_CB_OVERFLOW; |
| |
| ni_event(dev, s); |
| |
| return; |
| } |
| if (status & AI_SC_TC_St) { |
| #ifdef DEBUG_INTERRUPT |
| printk("ni_mio_common: SC_TC interrupt\n"); |
| #endif |
| if (!devpriv->ai_continuous) { |
| shutdown_ai_command(dev); |
| } |
| } |
| } |
| #ifndef PCIDMA |
| if (status & AI_FIFO_Half_Full_St) { |
| int i; |
| static const int timeout = 10; |
| /* pcmcia cards (at least 6036) seem to stop producing interrupts if we |
| *fail to get the fifo less than half full, so loop to be sure.*/ |
| for (i = 0; i < timeout; ++i) { |
| ni_handle_fifo_half_full(dev); |
| if ((devpriv->stc_readw(dev, |
| AI_Status_1_Register) & |
| AI_FIFO_Half_Full_St) == 0) |
| break; |
| } |
| } |
| #endif /* !PCIDMA */ |
| |
| if ((status & AI_STOP_St)) { |
| ni_handle_eos(dev, s); |
| } |
| |
| ni_event(dev, s); |
| |
| #ifdef DEBUG_INTERRUPT |
| status = devpriv->stc_readw(dev, AI_Status_1_Register); |
| if (status & Interrupt_A_St) { |
| printk |
| ("handle_a_interrupt: didn't clear interrupt? status=0x%x\n", |
| status); |
| } |
| #endif |
| } |
| |
| static void ack_b_interrupt(struct comedi_device *dev, unsigned short b_status) |
| { |
| unsigned short ack = 0; |
| if (b_status & AO_BC_TC_St) { |
| ack |= AO_BC_TC_Interrupt_Ack; |
| } |
| if (b_status & AO_Overrun_St) { |
| ack |= AO_Error_Interrupt_Ack; |
| } |
| if (b_status & AO_START_St) { |
| ack |= AO_START_Interrupt_Ack; |
| } |
| if (b_status & AO_START1_St) { |
| ack |= AO_START1_Interrupt_Ack; |
| } |
| if (b_status & AO_UC_TC_St) { |
| ack |= AO_UC_TC_Interrupt_Ack; |
| } |
| if (b_status & AO_UI2_TC_St) { |
| ack |= AO_UI2_TC_Interrupt_Ack; |
| } |
| if (b_status & AO_UPDATE_St) { |
| ack |= AO_UPDATE_Interrupt_Ack; |
| } |
| if (ack) |
| devpriv->stc_writew(dev, ack, Interrupt_B_Ack_Register); |
| } |
| |
| static void handle_b_interrupt(struct comedi_device *dev, |
| unsigned short b_status, unsigned ao_mite_status) |
| { |
| struct comedi_subdevice *s = dev->subdevices + NI_AO_SUBDEV; |
| /* unsigned short ack=0; */ |
| #ifdef DEBUG_INTERRUPT |
| printk("ni_mio_common: interrupt: b_status=%04x m1_status=%08x\n", |
| b_status, ao_mite_status); |
| ni_mio_print_status_b(b_status); |
| #endif |
| |
| #ifdef PCIDMA |
| /* Currently, mite.c requires us to handle LINKC */ |
| if (ao_mite_status & CHSR_LINKC) { |
| mite_handle_b_linkc(devpriv->mite, dev); |
| } |
| |
| if (ao_mite_status & ~(CHSR_INT | CHSR_LINKC | CHSR_DONE | CHSR_MRDY | |
| CHSR_DRDY | CHSR_DRQ1 | CHSR_DRQ0 | CHSR_ERROR | |
| CHSR_SABORT | CHSR_XFERR | CHSR_LxERR_mask)) { |
| printk |
| ("unknown mite interrupt, ack! (ao_mite_status=%08x)\n", |
| ao_mite_status); |
| /* mite_print_chsr(ao_mite_status); */ |
| s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; |
| } |
| #endif |
| |
| if (b_status == 0xffff) |
| return; |
| if (b_status & AO_Overrun_St) { |
| printk |
| ("ni_mio_common: AO FIFO underrun status=0x%04x status2=0x%04x\n", |
| b_status, devpriv->stc_readw(dev, AO_Status_2_Register)); |
| s->async->events |= COMEDI_CB_OVERFLOW; |
| } |
| |
| if (b_status & AO_BC_TC_St) { |
| MDPRINTK |
| ("ni_mio_common: AO BC_TC status=0x%04x status2=0x%04x\n", |
| b_status, devpriv->stc_readw(dev, AO_Status_2_Register)); |
| s->async->events |= COMEDI_CB_EOA; |
| } |
| #ifndef PCIDMA |
| if (b_status & AO_FIFO_Request_St) { |
| int ret; |
| |
| ret = ni_ao_fifo_half_empty(dev, s); |
| if (!ret) { |
| printk("ni_mio_common: AO buffer underrun\n"); |
| ni_set_bits(dev, Interrupt_B_Enable_Register, |
| AO_FIFO_Interrupt_Enable | |
| AO_Error_Interrupt_Enable, 0); |
| s->async->events |= COMEDI_CB_OVERFLOW; |
| } |
| } |
| #endif |
| |
| ni_event(dev, s); |
| } |
| |
| #ifdef DEBUG_STATUS_A |
| static const char *const status_a_strings[] = { |
| "passthru0", "fifo", "G0_gate", "G0_TC", |
| "stop", "start", "sc_tc", "start1", |
| "start2", "sc_tc_error", "overflow", "overrun", |
| "fifo_empty", "fifo_half_full", "fifo_full", "interrupt_a" |
| }; |
| |
| static void ni_mio_print_status_a(int status) |
| { |
| int i; |
| |
| printk("A status:"); |
| for (i = 15; i >= 0; i--) { |
| if (status & (1 << i)) { |
| printk(" %s", status_a_strings[i]); |
| } |
| } |
| printk("\n"); |
| } |
| #endif |
| |
| #ifdef DEBUG_STATUS_B |
| static const char *const status_b_strings[] = { |
| "passthru1", "fifo", "G1_gate", "G1_TC", |
| "UI2_TC", "UPDATE", "UC_TC", "BC_TC", |
| "start1", "overrun", "start", "bc_tc_error", |
| "fifo_empty", "fifo_half_full", "fifo_full", "interrupt_b" |
| }; |
| |
| static void ni_mio_print_status_b(int status) |
| { |
| int i; |
| |
| printk("B status:"); |
| for (i = 15; i >= 0; i--) { |
| if (status & (1 << i)) { |
| printk(" %s", status_b_strings[i]); |
| } |
| } |
| printk("\n"); |
| } |
| #endif |
| |
| #ifndef PCIDMA |
| |
| static void ni_ao_fifo_load(struct comedi_device *dev, |
| struct comedi_subdevice *s, int n) |
| { |
| struct comedi_async *async = s->async; |
| struct comedi_cmd *cmd = &async->cmd; |
| int chan; |
| int i; |
| short d; |
| u32 packed_data; |
| int range; |
| int err = 1; |
| |
| chan = async->cur_chan; |
| for (i = 0; i < n; i++) { |
| err &= comedi_buf_get(async, &d); |
| if (err == 0) |
| break; |
| |
| range = CR_RANGE(cmd->chanlist[chan]); |
| |
| if (boardtype.reg_type & ni_reg_6xxx_mask) { |
| packed_data = d & 0xffff; |
| /* 6711 only has 16 bit wide ao fifo */ |
| if (boardtype.reg_type != ni_reg_6711) { |
| err &= comedi_buf_get(async, &d); |
| if (err == 0) |
| break; |
| chan++; |
| i++; |
| packed_data |= (d << 16) & 0xffff0000; |
| } |
| ni_writel(packed_data, DAC_FIFO_Data_611x); |
| } else { |
| ni_writew(d, DAC_FIFO_Data); |
| } |
| chan++; |
| chan %= cmd->chanlist_len; |
| } |
| async->cur_chan = chan; |
| if (err == 0) { |
| async->events |= COMEDI_CB_OVERFLOW; |
| } |
| } |
| |
| /* |
| * There's a small problem if the FIFO gets really low and we |
| * don't have the data to fill it. Basically, if after we fill |
| * the FIFO with all the data available, the FIFO is _still_ |
| * less than half full, we never clear the interrupt. If the |
| * IRQ is in edge mode, we never get another interrupt, because |
| * this one wasn't cleared. If in level mode, we get flooded |
| * with interrupts that we can't fulfill, because nothing ever |
| * gets put into the buffer. |
| * |
| * This kind of situation is recoverable, but it is easier to |
| * just pretend we had a FIFO underrun, since there is a good |
| * chance it will happen anyway. This is _not_ the case for |
| * RT code, as RT code might purposely be running close to the |
| * metal. Needs to be fixed eventually. |
| */ |
| static int ni_ao_fifo_half_empty(struct comedi_device *dev, |
| struct comedi_subdevice *s) |
| { |
| int n; |
| |
| n = comedi_buf_read_n_available(s->async); |
| if (n == 0) { |
| s->async->events |= COMEDI_CB_OVERFLOW; |
| return 0; |
| } |
| |
| n /= sizeof(short); |
| if (n > boardtype.ao_fifo_depth / 2) |
| n = boardtype.ao_fifo_depth / 2; |
| |
| ni_ao_fifo_load(dev, s, n); |
| |
| s->async->events |= COMEDI_CB_BLOCK; |
| |
| return 1; |
| } |
| |
| static int ni_ao_prep_fifo(struct comedi_device *dev, |
| struct comedi_subdevice *s) |
| { |
| int n; |
| |
| /* reset fifo */ |
| devpriv->stc_writew(dev, 1, DAC_FIFO_Clear); |
| if (boardtype.reg_type & ni_reg_6xxx_mask) |
| ni_ao_win_outl(dev, 0x6, AO_FIFO_Offset_Load_611x); |
| |
| /* load some data */ |
| n = comedi_buf_read_n_available(s->async); |
| if (n == 0) |
| return 0; |
| |
| n /= sizeof(short); |
| if (n > boardtype.ao_fifo_depth) |
| n = boardtype.ao_fifo_depth; |
| |
| ni_ao_fifo_load(dev, s, n); |
| |
| return n; |
| } |
| |
| static void ni_ai_fifo_read(struct comedi_device *dev, |
| struct comedi_subdevice *s, int n) |
| { |
| struct comedi_async *async = s->async; |
| int i; |
| |
| if (boardtype.reg_type == ni_reg_611x) { |
| short data[2]; |
| u32 dl; |
| |
| for (i = 0; i < n / 2; i++) { |
| dl = ni_readl(ADC_FIFO_Data_611x); |
| /* This may get the hi/lo data in the wrong order */ |
| data[0] = (dl >> 16) & 0xffff; |
| data[1] = dl & 0xffff; |
| cfc_write_array_to_buffer(s, data, sizeof(data)); |
| } |
| /* Check if there's a single sample stuck in the FIFO */ |
| if (n % 2) { |
| dl = ni_readl(ADC_FIFO_Data_611x); |
| data[0] = dl & 0xffff; |
| cfc_write_to_buffer(s, data[0]); |
| } |
| } else if (boardtype.reg_type == ni_reg_6143) { |
| short data[2]; |
| u32 dl; |
| |
| /* This just reads the FIFO assuming the data is present, no checks on the FIFO status are performed */ |
| for (i = 0; i < n / 2; i++) { |
| dl = ni_readl(AIFIFO_Data_6143); |
| |
| data[0] = (dl >> 16) & 0xffff; |
| data[1] = dl & 0xffff; |
| cfc_write_array_to_buffer(s, data, sizeof(data)); |
| } |
| if (n % 2) { |
| /* Assume there is a single sample stuck in the FIFO */ |
| ni_writel(0x01, AIFIFO_Control_6143); /* Get stranded sample into FIFO */ |
| dl = ni_readl(AIFIFO_Data_6143); |
| data[0] = (dl >> 16) & 0xffff; |
| cfc_write_to_buffer(s, data[0]); |
| } |
| } else { |
| if (n > sizeof(devpriv->ai_fifo_buffer) / |
| sizeof(devpriv->ai_fifo_buffer[0])) { |
| comedi_error(dev, "bug! ai_fifo_buffer too small"); |
| async->events |= COMEDI_CB_ERROR; |
| return; |
| } |
| for (i = 0; i < n; i++) { |
| devpriv->ai_fifo_buffer[i] = |
| ni_readw(ADC_FIFO_Data_Register); |
| } |
| cfc_write_array_to_buffer(s, devpriv->ai_fifo_buffer, |
| n * |
| sizeof(devpriv->ai_fifo_buffer[0])); |
| } |
| } |
| |
| static void ni_handle_fifo_half_full(struct comedi_device *dev) |
| { |
| int n; |
| struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV; |
| |
| n = boardtype.ai_fifo_depth / 2; |
| |
| ni_ai_fifo_read(dev, s, n); |
| } |
| #endif |
| |
| #ifdef PCIDMA |
| static int ni_ai_drain_dma(struct comedi_device *dev) |
| { |
| int i; |
| static const int timeout = 10000; |
| unsigned long flags; |
| int retval = 0; |
| |
| spin_lock_irqsave(&devpriv->mite_channel_lock, flags); |
| if (devpriv->ai_mite_chan) { |
| for (i = 0; i < timeout; i++) { |
| if ((devpriv->stc_readw(dev, |
| AI_Status_1_Register) & |
| AI_FIFO_Empty_St) |
| && mite_bytes_in_transit(devpriv->ai_mite_chan) == |
| 0) |
| break; |
| udelay(5); |
| } |
| if (i == timeout) { |
| printk("ni_mio_common: wait for dma drain timed out\n"); |
| printk |
| ("mite_bytes_in_transit=%i, AI_Status1_Register=0x%x\n", |
| mite_bytes_in_transit(devpriv->ai_mite_chan), |
| devpriv->stc_readw(dev, AI_Status_1_Register)); |
| retval = -1; |
| } |
| } |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| |
| ni_sync_ai_dma(dev); |
| |
| return retval; |
| } |
| #endif |
| /* |
| Empties the AI fifo |
| */ |
| static void ni_handle_fifo_dregs(struct comedi_device *dev) |
| { |
| struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV; |
| short data[2]; |
| u32 dl; |
| short fifo_empty; |
| int i; |
| |
| if (boardtype.reg_type == ni_reg_611x) { |
| while ((devpriv->stc_readw(dev, |
| AI_Status_1_Register) & |
| AI_FIFO_Empty_St) == 0) { |
| dl = ni_readl(ADC_FIFO_Data_611x); |
| |
| /* This may get the hi/lo data in the wrong order */ |
| data[0] = (dl >> 16); |
| data[1] = (dl & 0xffff); |
| cfc_write_array_to_buffer(s, data, sizeof(data)); |
| } |
| } else if (boardtype.reg_type == ni_reg_6143) { |
| i = 0; |
| while (ni_readl(AIFIFO_Status_6143) & 0x04) { |
| dl = ni_readl(AIFIFO_Data_6143); |
| |
| /* This may get the hi/lo data in the wrong order */ |
| data[0] = (dl >> 16); |
| data[1] = (dl & 0xffff); |
| cfc_write_array_to_buffer(s, data, sizeof(data)); |
| i += 2; |
| } |
| /* Check if stranded sample is present */ |
| if (ni_readl(AIFIFO_Status_6143) & 0x01) { |
| ni_writel(0x01, AIFIFO_Control_6143); /* Get stranded sample into FIFO */ |
| dl = ni_readl(AIFIFO_Data_6143); |
| data[0] = (dl >> 16) & 0xffff; |
| cfc_write_to_buffer(s, data[0]); |
| } |
| |
| } else { |
| fifo_empty = |
| devpriv->stc_readw(dev, |
| AI_Status_1_Register) & AI_FIFO_Empty_St; |
| while (fifo_empty == 0) { |
| for (i = 0; |
| i < |
| sizeof(devpriv->ai_fifo_buffer) / |
| sizeof(devpriv->ai_fifo_buffer[0]); i++) { |
| fifo_empty = |
| devpriv->stc_readw(dev, |
| AI_Status_1_Register) & |
| AI_FIFO_Empty_St; |
| if (fifo_empty) |
| break; |
| devpriv->ai_fifo_buffer[i] = |
| ni_readw(ADC_FIFO_Data_Register); |
| } |
| cfc_write_array_to_buffer(s, devpriv->ai_fifo_buffer, |
| i * |
| sizeof(devpriv-> |
| ai_fifo_buffer[0])); |
| } |
| } |
| } |
| |
| static void get_last_sample_611x(struct comedi_device *dev) |
| { |
| struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV; |
| short data; |
| u32 dl; |
| |
| if (boardtype.reg_type != ni_reg_611x) |
| return; |
| |
| /* Check if there's a single sample stuck in the FIFO */ |
| if (ni_readb(XXX_Status) & 0x80) { |
| dl = ni_readl(ADC_FIFO_Data_611x); |
| data = (dl & 0xffff); |
| cfc_write_to_buffer(s, data); |
| } |
| } |
| |
| static void get_last_sample_6143(struct comedi_device *dev) |
| { |
| struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV; |
| short data; |
| u32 dl; |
| |
| if (boardtype.reg_type != ni_reg_6143) |
| return; |
| |
| /* Check if there's a single sample stuck in the FIFO */ |
| if (ni_readl(AIFIFO_Status_6143) & 0x01) { |
| ni_writel(0x01, AIFIFO_Control_6143); /* Get stranded sample into FIFO */ |
| dl = ni_readl(AIFIFO_Data_6143); |
| |
| /* This may get the hi/lo data in the wrong order */ |
| data = (dl >> 16) & 0xffff; |
| cfc_write_to_buffer(s, data); |
| } |
| } |
| |
| static void ni_ai_munge(struct comedi_device *dev, struct comedi_subdevice *s, |
| void *data, unsigned int num_bytes, |
| unsigned int chan_index) |
| { |
| struct comedi_async *async = s->async; |
| unsigned int i; |
| unsigned int length = num_bytes / bytes_per_sample(s); |
| short *array = data; |
| unsigned int *larray = data; |
| for (i = 0; i < length; i++) { |
| #ifdef PCIDMA |
| if (s->subdev_flags & SDF_LSAMPL) |
| larray[i] = le32_to_cpu(larray[i]); |
| else |
| array[i] = le16_to_cpu(array[i]); |
| #endif |
| if (s->subdev_flags & SDF_LSAMPL) |
| larray[i] += devpriv->ai_offset[chan_index]; |
| else |
| array[i] += devpriv->ai_offset[chan_index]; |
| chan_index++; |
| chan_index %= async->cmd.chanlist_len; |
| } |
| } |
| |
| #ifdef PCIDMA |
| |
| static int ni_ai_setup_MITE_dma(struct comedi_device *dev) |
| { |
| struct comedi_subdevice *s = dev->subdevices + NI_AI_SUBDEV; |
| int retval; |
| unsigned long flags; |
| |
| retval = ni_request_ai_mite_channel(dev); |
| if (retval) |
| return retval; |
| /* printk("comedi_debug: using mite channel %i for ai.\n", devpriv->ai_mite_chan->channel); */ |
| |
| /* write alloc the entire buffer */ |
| comedi_buf_write_alloc(s->async, s->async->prealloc_bufsz); |
| |
| spin_lock_irqsave(&devpriv->mite_channel_lock, flags); |
| if (devpriv->ai_mite_chan == NULL) { |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| return -EIO; |
| } |
| |
| switch (boardtype.reg_type) { |
| case ni_reg_611x: |
| case ni_reg_6143: |
| mite_prep_dma(devpriv->ai_mite_chan, 32, 16); |
| break; |
| case ni_reg_628x: |
| mite_prep_dma(devpriv->ai_mite_chan, 32, 32); |
| break; |
| default: |
| mite_prep_dma(devpriv->ai_mite_chan, 16, 16); |
| break; |
| }; |
| /*start the MITE */ |
| mite_dma_arm(devpriv->ai_mite_chan); |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| |
| return 0; |
| } |
| |
| static int ni_ao_setup_MITE_dma(struct comedi_device *dev) |
| { |
| struct comedi_subdevice *s = dev->subdevices + NI_AO_SUBDEV; |
| int retval; |
| unsigned long flags; |
| |
| retval = ni_request_ao_mite_channel(dev); |
| if (retval) |
| return retval; |
| |
| /* read alloc the entire buffer */ |
| comedi_buf_read_alloc(s->async, s->async->prealloc_bufsz); |
| |
| spin_lock_irqsave(&devpriv->mite_channel_lock, flags); |
| if (devpriv->ao_mite_chan) { |
| if (boardtype.reg_type & (ni_reg_611x | ni_reg_6713)) { |
| mite_prep_dma(devpriv->ao_mite_chan, 32, 32); |
| } else { |
| /* doing 32 instead of 16 bit wide transfers from memory |
| makes the mite do 32 bit pci transfers, doubling pci bandwidth. */ |
| mite_prep_dma(devpriv->ao_mite_chan, 16, 32); |
| } |
| mite_dma_arm(devpriv->ao_mite_chan); |
| } else |
| retval = -EIO; |
| spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags); |
| |
| return retval; |
| } |
| |
| #endif /* PCIDMA */ |
| |
| /* |
| used for both cancel ioctl and board initialization |
| |
| this is pretty harsh for a cancel, but it works... |
| */ |
| |
| static int ni_ai_reset(struct comedi_device *dev, struct comedi_subdevice *s) |
| { |
| ni_release_ai_mite_channel(dev); |
| /* ai configuration */ |
| devpriv->stc_writew(dev, AI_Configuration_Start | AI_Reset, |
| Joint_Reset_Register); |
| |
| ni_set_bits(dev, Interrupt_A_Enable_Register, |
| AI_SC_TC_Interrupt_Enable | AI_START1_Interrupt_Enable | |
| AI_START2_Interrupt_Enable | AI_START_Interrupt_Enable | |
| AI_STOP_Interrupt_Enable | AI_Error_Interrupt_Enable | |
| AI_FIFO_Interrupt_Enable, 0); |
| |
| ni_clear_ai_fifo(dev); |
| |
| if (boardtype.reg_type != ni_reg_6143) |
| ni_writeb(0, Misc_Command); |
| |
| devpriv->stc_writew(dev, AI_Disarm, AI_Command_1_Register); /* reset pulses */ |
| devpriv->stc_writew(dev, |
| AI_Start_Stop | AI_Mode_1_Reserved |
| /*| AI_Trigger_Once */ , |
| AI_Mode_1_Register); |
| devpriv->stc_writew(dev, 0x0000, AI_Mode_2_Register); |
| /* generate FIFO interrupts on non-empty */ |
| devpriv->stc_writew(dev, (0 << 6) | 0x0000, AI_Mode_3_Register); |
| if (boardtype.reg_type == ni_reg_611x) { |
| devpriv->stc_writew(dev, AI_SHIFTIN_Pulse_Width | |
| AI_SOC_Polarity | |
| AI_LOCALMUX_CLK_Pulse_Width, |
| AI_Personal_Register); |
| devpriv->stc_writew(dev, |
| AI_SCAN_IN_PROG_Output_Select(3) | |
| AI_EXTMUX_CLK_Output_Select(0) | |
| AI_LOCALMUX_CLK_Output_Select(2) | |
| AI_SC_TC_Output_Select(3) | |
| AI_CONVERT_Output_Select |
| (AI_CONVERT_Output_Enable_High), |
| AI_Output_Control_Register); |
| } else if (boardtype.reg_type == ni_reg_6143) { |
| devpriv->stc_writew(dev, AI_SHIFTIN_Pulse_Width | |
| AI_SOC_Polarity | |
| AI_LOCALMUX_CLK_Pulse_Width, |
| AI_Personal_Register); |
| devpriv->stc_writew(dev, |
| AI_SCAN_IN_PROG_Output_Select(3) | |
| AI_EXTMUX_CLK_Output_Select(0) | |
| AI_LOCALMUX_CLK_Output_Select(2) | |
| AI_SC_TC_Output_Select(3) | |
| AI_CONVERT_Output_Select |
| (AI_CONVERT_Output_Enable_Low), |
| AI_Output_Control_Register); |
| } else { |
| unsigned ai_output_control_bits; |
| devpriv->stc_writew(dev, AI_SHIFTIN_Pulse_Width | |
| AI_SOC_Polarity | |
| AI_CONVERT_Pulse_Width | |
| AI_LOCALMUX_CLK_Pulse_Width, |
| AI_Personal_Register); |
| ai_output_control_bits = |
| AI_SCAN_IN_PROG_Output_Select(3) | |
| AI_EXTMUX_CLK_Output_Select(0) | |
| AI_LOCALMUX_CLK_Output_Select(2) | |
| AI_SC_TC_Output_Select(3); |
| if (boardtype.reg_type == ni_reg_622x) |
| ai_output_control_bits |= |
| AI_CONVERT_Output_Select |
| (AI_CONVERT_Output_Enable_High); |
| else |
| ai_output_control_bits |= |
| AI_CONVERT_Output_Select |
| (AI_CONVERT_Output_Enable_Low); |
| devpriv->stc_writew(dev, ai_output_control_bits, |
| AI_Output_Control_Register); |
| } |
| /* the following registers should not be changed, because there |
| * are no backup registers in devpriv. If you want to change |
| * any of these, add a backup register and other appropriate code: |
| * AI_Mode_1_Register |
| * AI_Mode_3_Register |
| * AI_Personal_Register |
| * AI_Output_Control_Register |
| */ |
| devpriv->stc_writew(dev, AI_SC_TC_Error_Confirm | AI_START_Interrupt_Ack | AI_START2_Interrupt_Ack | AI_START1_Interrupt_Ack | AI_SC_TC_Interrupt_Ack | AI_Error_Interrupt_Ack | AI_STOP_Interrupt_Ack, Interrupt_A_Ack_Register); /* clear interrupts */ |
| |
| devpriv->stc_writew(dev, AI_Configuration_End, Joint_Reset_Register); |
| |
| return 0; |
| } |
| |
| static int ni_ai_poll(struct comedi_device *dev, struct comedi_subdevice *s) |
| { |
| unsigned long flags = 0; |
| int count; |
| |
| /* lock to avoid race with interrupt handler */ |
| if (in_interrupt() == 0) |
| spin_lock_irqsave(&dev->spinlock, flags); |
| #ifndef PCIDMA |
| ni_handle_fifo_dregs(dev); |
| #else |
| ni_sync_ai_dma(dev); |
| #endif |
| count = s->async->buf_write_count - s->async->buf_read_count; |
| if (in_interrupt() == 0) |
| spin_unlock_irqrestore(&dev->spinlock, flags); |
| |
| return count; |
| } |
| |
| static int ni_ai_insn_read(struct comedi_device *dev, |
| struct comedi_subdevice *s, struct comedi_insn *insn, |
| unsigned int *data) |
| { |
| int i, n; |
| const unsigned int mask = (1 << boardtype.adbits) - 1; |
| unsigned signbits; |
| unsigned short d; |
| unsigned long dl; |
| |
| ni_load_channelgain_list(dev, 1, &insn->chanspec); |
| |
| ni_clear_ai_fifo(dev); |
| |
| signbits = devpriv->ai_offset[0]; |
| if (boardtype.reg_type == ni_reg_611x) { |
| for (n = 0; n < num_adc_stages_611x; n++) { |
| devpriv->stc_writew(dev, AI_CONVERT_Pulse, |
| AI_Command_1_Register); |
| udelay(1); |
| } |
| for (n = 0; n < insn->n; n++) { |
| devpriv->stc_writew(dev, AI_CONVERT_Pulse, |
| AI_Command_1_Register); |
| /* The 611x has screwy 32-bit FIFOs. */ |
| d = 0; |
| for (i = 0; i < NI_TIMEOUT; i++) { |
| if (ni_readb(XXX_Status) & 0x80) { |
| d = (ni_readl(ADC_FIFO_Data_611x) >> 16) |
| & 0xffff; |
| break; |
| } |
| if (!(devpriv->stc_readw(dev, |
| AI_Status_1_Register) & |
| AI_FIFO_Empty_St)) { |
| d = ni_readl(ADC_FIFO_Data_611x) & |
| 0xffff; |
| break; |
| } |
| } |
| if (i == NI_TIMEOUT) { |
| printk |
| ("ni_mio_common: timeout in 611x ni_ai_insn_read\n"); |
| return -ETIME; |
| } |
| d += signbits; |
| data[n] = d; |
| } |
| } else if (boardtype.reg_type == ni_reg_6143) { |
| for (n = 0; n < insn->n; n++) { |
| devpriv->stc_writew(dev, AI_CONVERT_Pulse, |
| AI_Command_1_Register); |
| |
| /* The 6143 has 32-bit FIFOs. You need to strobe a bit to move a single 16bit stranded sample into the FIFO */ |
| dl = 0; |
| for (i = 0; i < NI_TIMEOUT; i++) { |
| if (ni_readl(AIFIFO_Status_6143) & 0x01) { |
| ni_writel(0x01, AIFIFO_Control_6143); /* Get stranded sample into FIFO */ |
| dl = ni_readl(AIFIFO_Data_6143); |
| break; |
| } |
| } |
| if (i == NI_TIMEOUT) { |
| printk |
| ("ni_mio_common: timeout in 6143 ni_ai_insn_read\n"); |
| return -ETIME; |
| } |
| data[n] = (((dl >> 16) & 0xFFFF) + signbits) & 0xFFFF; |
| } |
| } else { |
| for (n = 0; n < insn->n; n++) { |
| devpriv->stc_writew(dev, AI_CONVERT_Pulse, |
| AI_Command_1_Register); |
| for (i = 0; i < NI_TIMEOUT; i++) { |
| if (!(devpriv->stc_readw(dev, |
| AI_Status_1_Register) & |
| AI_FIFO_Empty_St)) |
| break; |
| } |
| if (i == NI_TIMEOUT) { |
| printk |
| ("ni_mio_common: timeout in ni_ai_insn_read\n"); |
| return -ETIME; |
| } |
| if (boardtype.reg_type & ni_reg_m_series_mask) { |
| data[n] = |
| ni_readl(M_Offset_AI_FIFO_Data) & mask; |
| } else { |
| d = ni_readw(ADC_FIFO_Data_Register); |
| d += signbits; /* subtle: needs to be short addition */ |
| data[n] = d; |
| } |
| } |
| } |
| return insn->n; |
| } |
| |
| void ni_prime_channelgain_list(struct comedi_device *dev) |
| { |
| int i; |
| devpriv->stc_writew(dev, AI_CONVERT_Pulse, AI_Command_1_Register); |
| for (i = 0; i < NI_TIMEOUT; ++i) { |
| if (!(devpriv->stc_readw(dev, |
| AI_Status_1_Register) & |
| AI_FIFO_Empty_St)) { |
| devpriv->stc_writew(dev, 1, ADC_FIFO_Clear); |
| return; |
| } |
| udelay(1); |
| } |
| printk("ni_mio_common: timeout loading channel/gain list\n"); |
| } |
| |
| static void ni_m_series_load_channelgain_list(struct comedi_device *dev, |
| unsigned int n_chan, |
| unsigned int *list) |
| { |
| unsigned int chan, range, aref; |
| unsigned int i; |
| unsigned offset; |
| unsigned int dither; |
| unsigned range_code; |
| |
| devpriv->stc_writew(dev, 1, Configuration_Memory_Clear); |
| |
| /* offset = 1 << (boardtype.adbits - 1); */ |
| if ((list[0] & CR_ALT_SOURCE)) { |
| unsigned bypass_bits; |
| chan = CR_CHAN(list[0]); |
| range = CR_RANGE(list[0]); |
| range_code = ni_gainlkup[boardtype.gainlkup][range]; |
| dither = ((list[0] & CR_ALT_FILTER) != 0); |
| bypass_bits = MSeries_AI_Bypass_Config_FIFO_Bit; |
| bypass_bits |= chan; |
| bypass_bits |= |
| (devpriv->ai_calib_source) & |
| (MSeries_AI_Bypass_Cal_Sel_Pos_Mask | |
| MSeries_AI_Bypass_Cal_Sel_Neg_Mask | |
| MSeries_AI_Bypass_Mode_Mux_Mask | |
| MSeries_AO_Bypass_AO_Cal_Sel_Mask); |
| bypass_bits |= MSeries_AI_Bypass_Gain_Bits(range_code); |
| if (dither) |
| bypass_bits |= MSeries_AI_Bypass_Dither_Bit; |
| /* don't use 2's complement encoding */ |
| bypass_bits |= MSeries_AI_Bypass_Polarity_Bit; |
| ni_writel(bypass_bits, M_Offset_AI_Config_FIFO_Bypass); |
| } else { |
| ni_writel(0, M_Offset_AI_Config_FIFO_Bypass); |
| } |
| offset = 0; |
| for (i = 0; i < n_chan; i++) { |
| unsigned config_bits = 0; |
| chan = CR_CHAN(list[i]); |
| aref = CR_AREF(list[i]); |
| range = CR_RANGE(list[i]); |
| dither = ((list[i] & CR_ALT_FILTER) != 0); |
| |
| range_code = ni_gainlkup[boardtype.gainlkup][range]; |
| devpriv->ai_offset[i] = offset; |
| switch (aref) { |
| case AREF_DIFF: |
| config_bits |= |
| MSeries_AI_Config_Channel_Type_Differential_Bits; |
| break; |
| case AREF_COMMON: |
| config_bits |= |
| MSeries_AI_Config_Channel_Type_Common_Ref_Bits; |
| break; |
| case AREF_GROUND: |
| config_bits |= |
| MSeries_AI_Config_Channel_Type_Ground_Ref_Bits; |
| break; |
| case AREF_OTHER: |
| break; |
| } |
| config_bits |= MSeries_AI_Config_Channel_Bits(chan); |
| config_bits |= |
| MSeries_AI_Config_Bank_Bits(boardtype.reg_type, chan); |
| config_bits |= MSeries_AI_Config_Gain_Bits(range_code); |
| if (i == n_chan - 1) |
| config_bits |= MSeries_AI_Config_Last_Channel_Bit; |
| if (dither) |
| config_bits |= MSeries_AI_Config_Dither_Bit; |
| /* don't use 2's complement encoding */ |
| config_bits |= MSeries_AI_Config_Polarity_Bit; |
| ni_writew(config_bits, M_Offset_AI_Config_FIFO_Data); |
| } |
| ni_prime_channelgain_list(dev); |
| } |
| |
| /* |
| * Notes on the 6110 and 6111: |
| * These boards a slightly different than the rest of the series, since |
| * they have multiple A/D converters. |
| * From the driver side, the configuration memory is a |
| * little different. |
| * Configuration Memory Low: |
| * bits 15-9: same |
| * bit 8: unipolar/bipolar (should be 0 for bipolar) |
| * bits 0-3: gain. This is 4 bits instead of 3 for the other boards |
| * 1001 gain=0.1 (+/- 50) |
| * 1010 0.2 |
| * 1011 0.1 |
| * 0001 1 |
| * 0010 2 |
| * 0011 5 |
| * 0100 10 |
| * 0101 20 |
| * 0110 50 |
| * Configuration Memory High: |
| * bits 12-14: Channel Type |
| * 001 for differential |
| * 000 for calibration |
| * bit 11: coupling (this is not currently handled) |
| * 1 AC coupling |
| * 0 DC coupling |
| * bits 0-2: channel |
| * valid channels are 0-3 |
| */ |
| static void ni_load_channelgain_list(struct comedi_device *dev, |
| unsigned int n_chan, unsigned int *list) |
| { |
| unsigned int chan, range, aref; |
| unsigned int i; |
| unsigned int hi, lo; |
| unsigned offset; |
| unsigned int dither; |
| |
| if (boardtype.reg_type & ni_reg_m_series_mask) { |
| ni_m_series_load_channelgain_list(dev, n_chan, list); |
| return; |
| } |
| if (n_chan == 1 && (boardtype.reg_type != ni_reg_611x) |
| && (boardtype.reg_type != ni_reg_6143)) { |
| if (devpriv->changain_state |
| && devpriv->changain_spec == list[0]) { |
| /* ready to go. */ |
| return; |
| } |
| devpriv->changain_state = 1; |
| devpriv->changain_spec = list[0]; |
| } else { |
| devpriv->changain_state = 0; |
| } |
| |
| devpriv->stc_writew(dev, 1, Configuration_Memory_Clear); |
| |
| /* Set up Calibration mode if required */ |
| if (boardtype.reg_type == ni_reg_6143) { |
| if ((list[0] & CR_ALT_SOURCE) |
| && !devpriv->ai_calib_source_enabled) { |
| /* Strobe Relay enable bit */ |
| ni_writew(devpriv->ai_calib_source | |
| Calibration_Channel_6143_RelayOn, |
| Calibration_Channel_6143); |
| ni_writew(devpriv->ai_calib_source, |
| Calibration_Channel_6143); |
| devpriv->ai_calib_source_enabled = 1; |
| msleep_interruptible(100); /* Allow relays to change */ |
| } else if (!(list[0] & CR_ALT_SOURCE) |
| && devpriv->ai_calib_source_enabled) { |
| /* Strobe Relay disable bit */ |
| ni_writew(devpriv->ai_calib_source | |
| Calibration_Channel_6143_RelayOff, |
| Calibration_Channel_6143); |
| ni_writew(devpriv->ai_calib_source, |
| Calibration_Channel_6143); |
| devpriv->ai_calib_source_enabled = 0; |
| msleep_interruptible(100); /* Allow relays to change */ |
| } |
| } |
| |
| offset = 1 << (boardtype.adbits - 1); |
| for (i = 0; i < n_chan; i++) { |
| if ((boardtype.reg_type != ni_reg_6143) |
| && (list[i] & CR_ALT_SOURCE)) { |
| chan = devpriv->ai_calib_source; |
| } else { |
| chan = CR_CHAN(list[i]); |
| } |
| aref = CR_AREF(list[i]); |
| range = CR_RANGE(list[i]); |
| dither = ((list[i] & CR_ALT_FILTER) != 0); |
| |
| /* fix the external/internal range differences */ |
| range = ni_gainlkup[boardtype.gainlkup][range]; |
| if (boardtype.reg_type == ni_reg_611x) |
| devpriv->ai_offset[i] = offset; |
| else |
| devpriv->ai_offset[i] = (range & 0x100) ? 0 : offset; |
| |
| hi = 0; |
| if ((list[i] & CR_ALT_SOURCE)) { |
| if (boardtype.reg_type == ni_reg_611x) |
| ni_writew(CR_CHAN(list[i]) & 0x0003, |
| Calibration_Channel_Select_611x); |
| } else { |
| if (boardtype.reg_type == ni_reg_611x) |
| aref = AREF_DIFF; |
| else if (boardtype.reg_type == ni_reg_6143) |
| aref = AREF_OTHER; |
| switch (aref) { |
| case AREF_DIFF: |
| hi |= AI_DIFFERENTIAL; |
| break; |
| case AREF_COMMON: |
| hi |= AI_COMMON; |
| break; |
| case AREF_GROUND: |
| hi |= AI_GROUND; |
| break; |
| case AREF_OTHER: |
| break; |
| } |
| } |
| hi |= AI_CONFIG_CHANNEL(chan); |
| |
| ni_writew(hi, Configuration_Memory_High); |
| |
| if (boardtype.reg_type != ni_reg_6143) { |
| lo = range; |
| if (i == n_chan - 1) |
| lo |= AI_LAST_CHANNEL; |
| if (dither) |
| lo |= AI_DITHER; |
| |
| ni_writew(lo, Configuration_Memory_Low); |
| } |
| } |
| |
| /* prime the channel/gain list */ |
| if ((boardtype.reg_type != ni_reg_611x) |
| && (boardtype.reg_type != ni_reg_6143)) { |
| ni_prime_channelgain_list(dev); |
| } |
| } |
| |
| static int ni_ns_to_timer(const struct comedi_device *dev, unsigned nanosec, |
| int round_mode) |
| { |
| int divider; |
| switch (round_mode) { |
| case TRIG_ROUND_NEAREST: |
| default: |
| divider = (nanosec + devpriv->clock_ns / 2) / devpriv->clock_ns; |
| break; |
| case TRIG_ROUND_DOWN: |
| divider = (nanosec) / devpriv->clock_ns; |
| break; |
| case TRIG_ROUND_UP: |
| divider = (nanosec + devpriv->clock_ns - 1) / devpriv->clock_ns; |
| break; |
| } |
| return divider - 1; |
| } |
| |
| static unsigned ni_timer_to_ns(const struct comedi_device *dev, int timer) |
| { |
| return devpriv->clock_ns * (timer + 1); |
| } |
| |
| static unsigned ni_min_ai_scan_period_ns(struct comedi_device *dev, |
| unsigned num_channels) |
| { |
| switch (boardtype.reg_type) { |
| case ni_reg_611x: |
| case ni_reg_6143: |
| /* simultaneously-sampled inputs */ |
| return boardtype.ai_speed; |
| break; |
| default: |
| /* multiplexed inputs */ |
| break; |
| }; |
| return boardtype.ai_speed * num_channels; |
| } |
| |
| static int ni_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, |
| struct comedi_cmd *cmd) |
| { |
| int err = 0; |
| int tmp; |
| int sources; |
| |
| /* step 1: make sure trigger sources are trivially valid */ |
| |
| if ((cmd->flags & CMDF_WRITE)) { |
| cmd->flags &= ~CMDF_WRITE; |
| } |
| |
| tmp = cmd->start_src; |
| cmd->start_src &= TRIG_NOW | TRIG_INT | TRIG_EXT; |
| if (!cmd->start_src || tmp != cmd->start_src) |
| err++; |
| |
| tmp = cmd->scan_begin_src; |
| cmd->scan_begin_src &= TRIG_TIMER | TRIG_EXT; |
| if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) |
| err++; |
| |
| tmp = cmd->convert_src; |
| sources = TRIG_TIMER | TRIG_EXT; |
| if ((boardtype.reg_type == ni_reg_611x) |
| || (boardtype.reg_type == ni_reg_6143)) |
| sources |= TRIG_NOW; |
| cmd->convert_src &= sources; |
| if (!cmd->convert_src || tmp != cmd->convert_src) |
| err++; |
| |
| tmp = cmd->scan_end_src; |
| cmd->scan_end_src &= TRIG_COUNT; |
| if (!cmd->scan_end_src || tmp != cmd->scan_end_src) |
| err++; |
| |
| tmp = cmd->stop_src; |
| cmd->stop_src &= TRIG_COUNT | TRIG_NONE; |
| if (!cmd->stop_src || tmp != cmd->stop_src) |
| err++; |
| |
| if (err) |
| return 1; |
| |
| /* step 2: make sure trigger sources are unique and mutually compatible */ |
| |
| /* note that mutual compatibility is not an issue here */ |
| if (cmd->start_src != TRIG_NOW && |
| cmd->start_src != TRIG_INT && cmd->start_src != TRIG_EXT) |
| err++; |
| if (cmd->scan_begin_src != TRIG_TIMER && |
| cmd->scan_begin_src != TRIG_EXT && |
| cmd->scan_begin_src != TRIG_OTHER) |
| err++; |
| if (cmd->convert_src != TRIG_TIMER && |
| cmd->convert_src != TRIG_EXT && cmd->convert_src != TRIG_NOW) |
| err++; |
| if (cmd->stop_src != TRIG_COUNT && cmd->stop_src != TRIG_NONE) |
| err++; |
| |
| if (err) |
| return 2; |
| |
| /* step 3: make sure arguments are trivially compatible */ |
| |
| if (cmd->start_src == TRIG_EXT) { |
| /* external trigger */ |
| unsigned int tmp = CR_CHAN(cmd->start_arg); |
| |
| if (tmp > 16) |
| tmp = 16; |
| tmp |= (cmd->start_arg & (CR_INVERT | CR_EDGE)); |
| if (cmd->start_arg != tmp) { |
| cmd->start_arg = tmp; |
| err++; |
| } |
| } else { |
| if (cmd->start_arg != 0) { |
| /* true for both TRIG_NOW and TRIG_INT */ |
| cmd->start_arg = 0; |
| err++; |
| } |
| } |
| if (cmd->scan_begin_src == TRIG_TIMER) { |
| if (cmd->scan_begin_arg < ni_min_ai_scan_period_ns(dev, |
| cmd-> |
| chanlist_len)) |
| { |
| cmd->scan_begin_arg = |
| ni_min_ai_scan_period_ns(dev, cmd->chanlist_len); |
| err++; |
| } |
| if (cmd->scan_begin_arg > devpriv->clock_ns * 0xffffff) { |
| cmd->scan_begin_arg = devpriv->clock_ns * 0xffffff; |
| err++; |
| } |
| } else if (cmd->scan_begin_src == TRIG_EXT) { |
| /* external trigger */ |
| unsigned int tmp = CR_CHAN(cmd->scan_begin_arg); |
| |
| if (tmp > 16) |
| tmp = 16; |
| tmp |= (cmd->scan_begin_arg & (CR_INVERT | CR_EDGE)); |
| if (cmd->scan_begin_arg != tmp) { |
| cmd->scan_begin_arg = tmp; |
| err++; |
| } |
| } else { /* TRIG_OTHER */ |
| if (cmd->scan_begin_arg) { |
| cmd->scan_begin_arg = 0; |
| err++; |
| } |
| } |
| if (cmd->convert_src == TRIG_TIMER) { |
| if ((boardtype.reg_type == ni_reg_611x) |
| || (boardtype.reg_type == ni_reg_6143)) { |
| if (cmd->convert_arg != 0) { |
| cmd->convert_arg = 0; |
| err++; |
| } |
| } else { |
| if (cmd->convert_arg < boardtype.ai_speed) { |
| cmd->convert_arg = boardtype.ai_speed; |
| err++; |
| } |
| if (cmd->convert_arg > devpriv->clock_ns * 0xffff) { |
| cmd->convert_arg = devpriv->clock_ns * 0xffff; |
| err++; |
| } |
| } |
| } else if (cmd->convert_src == TRIG_EXT) { |
| /* external trigger */ |
| unsigned int tmp = CR_CHAN(cmd->convert_arg); |
| |
| if (tmp > 16) |
| tmp = 16; |
| tmp |= (cmd->convert_arg & (CR_ALT_FILTER | CR_INVERT)); |
| if (cmd->convert_arg != tmp) { |
| cmd->convert_arg = tmp; |
| err++; |
| } |
| } else if (cmd->convert_src == TRIG_NOW) { |
| if (cmd->convert_arg != 0) { |
| cmd->convert_arg = 0; |
| err++; |
| } |
| } |
| |
| if (cmd->scan_end_arg != cmd->chanlist_len) { |
| cmd->scan_end_arg = cmd->chanlist_len; |
| err++; |
| } |
| if (cmd->stop_src == TRIG_COUNT) { |
| unsigned int max_count = 0x01000000; |
| |
| if (boardtype.reg_type == ni_reg_611x) |
| max_count -= num_adc_stages_611x; |
| if (cmd->stop_arg > max_count) { |
| cmd->stop_arg = max_count; |
| err++; |
| } |
| if (cmd->stop_arg < 1) { |
| cmd->stop_arg = 1; |
| err++; |
| } |
| } else { |
| /* TRIG_NONE */ |
| if (cmd->stop_arg != 0) { |
| cmd->stop_arg = 0; |
| err++; |
| } |
| } |
| |
| if (err) |
| return 3; |
| |
| /* step 4: fix up any arguments */ |
| |
| if (cmd->scan_begin_src == TRIG_TIMER) { |
| tmp = cmd->scan_begin_arg; |
| cmd->scan_begin_arg = |
| ni_timer_to_ns(dev, ni_ns_to_timer(dev, |
| cmd->scan_begin_arg, |
| cmd-> |
| flags & |
| TRIG_ROUND_MASK)); |
| if (tmp != cmd->scan_begin_arg) |
| err++; |
| } |
| if (cmd->convert_src == TRIG_TIMER) { |
| if ((boardtype.reg_type != ni_reg_611x) |
| && (boardtype.reg_type != ni_reg_6143)) { |
| tmp = cmd->convert_arg; |
| cmd->convert_arg = |
| ni_timer_to_ns(dev, ni_ns_to_timer(dev, |
| cmd->convert_arg, |
| cmd-> |
| flags & |
| TRIG_ROUND_MASK)); |
| if (tmp != cmd->convert_arg) |
| err++; |
| if (cmd->scan_begin_src == TRIG_TIMER && |
| cmd->scan_begin_arg < |
| cmd->convert_arg * cmd->scan_end_arg) { |
| cmd->scan_begin_arg = |
| cmd->convert_arg * cmd->scan_end_arg; |
| err++; |
| } |
| } |
| } |
| |
| if (err) |
| return 4; |
| |
| return 0; |
| } |
| |
| static int ni_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) |
| { |
| const struct comedi_cmd *cmd = &s->async->cmd; |
| int timer; |
| int mode1 = 0; /* mode1 is needed for both stop and convert */ |
| int mode2 = 0; |
| int start_stop_select = 0; |
| unsigned int stop_count; |
| int interrupt_a_enable = 0; |
| |
| MDPRINTK("ni_ai_cmd\n"); |
| if (dev->irq == 0) { |
| comedi_error(dev, "cannot run command without an irq"); |
| return -EIO; |
| } |
| ni_clear_ai_fifo(dev); |
| |
| ni_load_channelgain_list(dev, cmd->chanlist_len, cmd->chanlist); |
| |
| /* start configuration */ |
| devpriv->stc_writew(dev, AI_Configuration_Start, Joint_Reset_Register); |
| |
| /* disable analog triggering for now, since it |
| * interferes with the use of pfi0 */ |
| devpriv->an_trig_etc_reg &= ~Analog_Trigger_Enable; |
| devpriv->stc_writew(dev, devpriv->an_trig_etc_reg, |
| Analog_Trigger_Etc_Register); |
| |
| switch (cmd->start_src) { |
| case TRIG_INT: |
| case TRIG_NOW: |
| devpriv->stc_writew(dev, AI_START2_Select(0) | |
| AI_START1_Sync | AI_START1_Edge | |
| AI_START1_Select(0), |
| AI_Trigger_Select_Register); |
| break; |
| case TRIG_EXT: |
| { |
| int chan = CR_CHAN(cmd->start_arg); |
| unsigned int bits = AI_START2_Select(0) | |
| AI_START1_Sync | AI_START1_Select(chan + 1); |
| |
| if (cmd->start_arg & CR_INVERT) |
| bits |= AI_START1_Polarity; |
| if (cmd->start_arg & CR_EDGE) |
| bits |= AI_START1_Edge; |
| devpriv->stc_writew(dev, bits, |
| AI_Trigger_Select_Register); |
| break; |
| } |
| } |
| |
| mode2 &= ~AI_Pre_Trigger; |
| mode2 &= ~AI_SC_Initial_Load_Source; |
| mode2 &= ~AI_SC_Reload_Mode; |
| devpriv->stc_writew(dev, mode2, AI_Mode_2_Register); |
| |
| if (cmd->chanlist_len == 1 || (boardtype.reg_type == ni_reg_611x) |
| || (boardtype.reg_type == ni_reg_6143)) { |
| start_stop_select |= AI_STOP_Polarity; |
| start_stop_select |= AI_STOP_Select(31); /* logic low */ |
| start_stop_select |= AI_STOP_Sync; |
| } else { |
| start_stop_select |= AI_STOP_Select(19); /* ai configuration memory */ |
| } |
| devpriv->stc_writew(dev, start_stop_select, |
| AI_START_STOP_Select_Register); |
| |
| devpriv->ai_cmd2 = 0; |
| switch (cmd->stop_src) { |
| case TRIG_COUNT: |
| stop_count = cmd->stop_arg - 1; |
| |
| if (boardtype.reg_type == ni_reg_611x) { |
| /* have to take 3 stage adc pipeline into account */ |
| stop_count += num_adc_stages_611x; |
| } |
| /* stage number of scans */ |
| devpriv->stc_writel(dev, stop_count, AI_SC_Load_A_Registers); |
| |
| mode1 |= AI_Start_Stop | AI_Mode_1_Reserved | AI_Trigger_Once; |
| devpriv->stc_writew(dev, mode1, AI_Mode_1_Register); |
| /* load SC (Scan Count) */ |
| devpriv->stc_writew(dev, AI_SC_Load, AI_Command_1_Register); |
| |
| devpriv->ai_continuous = 0; |
| if (stop_count == 0) { |
| devpriv->ai_cmd2 |= AI_End_On_End_Of_Scan; |
| interrupt_a_enable |= AI_STOP_Interrupt_Enable; |
| /* this is required to get the last sample for chanlist_len > 1, not sure why */ |
| if (cmd->chanlist_len > 1) |
| start_stop_select |= |
| AI_STOP_Polarity | AI_STOP_Edge; |
| } |
| break; |
| case TRIG_NONE: |
| /* stage number of scans */ |
| devpriv->stc_writel(dev, 0, AI_SC_Load_A_Registers); |
| |
| mode1 |= AI_Start_Stop | AI_Mode_1_Reserved | AI_Continuous; |
| devpriv->stc_writew(dev, mode1, AI_Mode_1_Register); |
| |
| /* load SC (Scan Count) */ |
| devpriv->stc_writew(dev, AI_SC_Load, AI_Command_1_Register); |
| |
| devpriv->ai_continuous = 1; |
| |
| break; |
| } |
| |
| switch (cmd->scan_begin_src) { |
| case TRIG_TIMER: |
| /* |
| stop bits for non 611x boards |
| AI_SI_Special_Trigger_Delay=0 |
| AI_Pre_Trigger=0 |
| AI_START_STOP_Select_Register: |
| AI_START_Polarity=0 (?) rising edge |
| AI_START_Edge=1 edge triggered |
| AI_START_Sync=1 (?) |
| AI_START_Select=0 SI_TC |
| AI_STOP_Polarity=0 rising edge |
| AI_STOP_Edge=0 level |
| AI_STOP_Sync=1 |
| AI_STOP_Select=19 external pin (configuration mem) |
| */ |
| start_stop_select |= AI_START_Edge | AI_START_Sync; |
| devpriv->stc_writew(dev, start_stop_select, |
| AI_START_STOP_Select_Register); |
| |
| mode2 |= AI_SI_Reload_Mode(0); |
| /* AI_SI_Initial_Load_Source=A */ |
| mode2 &= ~AI_SI_Initial_Load_Source; |
| /* mode2 |= AI_SC_Reload_Mode; */ |
| devpriv->stc_writew(dev, mode2, AI_Mode_2_Register); |
| |
| /* load SI */ |
| timer = ni_ns_to_timer(dev, cmd->scan_begin_arg, |
| TRIG_ROUND_NEAREST); |
| devpriv->stc_writel(dev, timer, AI_SI_Load_A_Registers); |
| devpriv->stc_writew(dev, AI_SI_Load, AI_Command_1_Register); |
| break; |
| case TRIG_EXT: |
| if (cmd->scan_begin_arg & CR_EDGE) |
| start_stop_select |= AI_START_Edge; |
| /* AI_START_Polarity==1 is falling edge */ |
| if (cmd->scan_begin_arg & CR_INVERT) |
| start_stop_select |= AI_START_Polarity; |
| if (cmd->scan_begin_src != cmd->convert_src || |
| (cmd->scan_begin_arg & ~CR_EDGE) != |
| (cmd->convert_arg & ~CR_EDGE)) |
| start_stop_select |= AI_START_Sync; |
| start_stop_select |= |
| AI_START_Select(1 + CR_CHAN(cmd->scan_begin_arg)); |
| devpriv->stc_writew(dev, start_stop_select, |
| AI_START_STOP_Select_Register); |
| break; |
| } |
| |
| switch (cmd->convert_src) { |
| case TRIG_TIMER: |
| case TRIG_NOW: |
| if (cmd->convert_arg == 0 || cmd->convert_src == TRIG_NOW) |
| timer = 1; |
| else |
| timer = ni_ns_to_timer(dev, cmd->convert_arg, |
| TRIG_ROUND_NEAREST); |
| devpriv->stc_writew(dev, 1, AI_SI2_Load_A_Register); /* 0,0 does not work. */ |
| devpriv->stc_writew(dev, timer, AI_SI2_Load_B_Register); |
| |
| /* AI_SI2_Reload_Mode = alternate */ |
| /* AI_SI2_Initial_Load_Source = A */ |
| mode2 &= ~AI_SI2_Initial_Load_Source; |
| mode2 |= AI_SI2_Reload_Mode; |
| devpriv->stc_writew(dev, mode2, AI_Mode_2_Register); |
| |
| /* AI_SI2_Load */ |
| devpriv->stc_writew(dev, AI_SI2_Load, AI_Command_1_Register); |
| |
| mode2 |= AI_SI2_Reload_Mode; /* alternate */ |
| mode2 |= AI_SI2_Initial_Load_Source; /* B */ |
| |
| devpriv->stc_writew(dev, mode2, AI_Mode_2_Register); |
| break; |
| case TRIG_EXT: |
| mode1 |= AI_CONVERT_Source_Select(1 + cmd->convert_arg); |
| if ((cmd->convert_arg & CR_INVERT) == 0) |
| mode1 |= AI_CONVERT_Source_Polarity; |
| devpriv->stc_writew(dev, mode1, AI_Mode_1_Register); |
| |
| mode2 |= AI_Start_Stop_Gate_Enable | AI_SC_Gate_Enable; |
| devpriv->stc_writew(dev, mode2, AI_Mode_2_Register); |
| |
| break; |
| } |
| |
| if (dev->irq) { |
| |
| /* interrupt on FIFO, errors, SC_TC */ |
| interrupt_a_enable |= AI_Error_Interrupt_Enable | |
| AI_SC_TC_Interrupt_Enable; |
| |
| #ifndef PCIDMA |
| interrupt_a_enable |= AI_FIFO_Interrupt_Enable; |
| #endif |
| |
| if (cmd->flags & TRIG_WAKE_EOS |
| || (devpriv->ai_cmd2 & AI_End_On_End_Of_Scan)) { |
| /* wake on end-of-scan */ |
| devpriv->aimode = AIMODE_SCAN; |
| } else { |
| devpriv->aimode = AIMODE_HALF_FULL; |
| } |
| |
| switch (devpriv->aimode) { |
| case AIMODE_HALF_FULL: |
| /*generate FIFO interrupts and DMA requests on half-full */ |
| #ifdef PCIDMA |
| devpriv->stc_writew(dev, AI_FIFO_Mode_HF_to_E, |
| AI_Mode_3_Register); |
| #else |
| devpriv->stc_writew(dev, AI_FIFO_Mode_HF, |
| AI_Mode_3_Register); |
| #endif |
| break; |
| case AIMODE_SAMPLE: |
| /*generate FIFO interrupts on non-empty */ |
| devpriv->stc_writew(dev, AI_FIFO_Mode_NE, |
| AI_Mode_3_Register); |
| break; |
| case AIMODE_SCAN: |
| #ifdef PCIDMA |
| devpriv->stc_writew(dev, AI_FIFO_Mode_NE, |
| AI_Mode_3_Register); |
| #else |
| devpriv->stc_writew(dev, AI_FIFO_Mode_HF, |
| AI_Mode_3_Register); |
| #endif |
| interrupt_a_enable |= AI_STOP_Interrupt_Enable; |
| break; |
| default: |
| break; |
| } |
| |
| devpriv->stc_writew(dev, AI_Error_Interrupt_Ack | AI_STOP_Interrupt_Ack | AI_START_Interrupt_Ack | AI_START2_Interrupt_Ack | AI_START1_Interrupt_Ack | AI_SC_TC_Interrupt_Ack | AI_SC_TC_Error_Confirm, Interrupt_A_Ack_Register); /* clear interrupts */ |
| |
| ni_set_bits(dev, Interrupt_A_Enable_Register, |
| interrupt_a_enable, 1); |
| |
| MDPRINTK("Interrupt_A_Enable_Register = 0x%04x\n", |
| devpriv->int_a_enable_reg); |
| } else { |
| /* interrupt on nothing */ |
| ni_set_bits(dev, Interrupt_A_Enable_Register, ~0, 0); |
| |
| /* XXX start polling if necessary */ |
| MDPRINTK("interrupting on nothing\n"); |
| } |
| |
| /* end configuration */ |
| devpriv->stc_writew(dev, AI_Configuration_End, Joint_Reset_Register); |
| |
| switch (cmd->scan_begin_src) { |
| case TRIG_TIMER: |
| devpriv->stc_writew(dev, |
| AI_SI2_Arm | AI_SI_Arm | AI_DIV_Arm | |
| AI_SC_Arm, AI_Command_1_Register); |
| break; |
| case TRIG_EXT: |
| /* XXX AI_SI_Arm? */ |
| devpriv->stc_writew(dev, |
| AI_SI2_Arm | AI_SI_Arm | AI_DIV_Arm | |
| AI_SC_Arm, AI_Command_1_Register); |
| break; |
| } |
| |
| #ifdef PCIDMA |
| { |
| int retval = ni_ai_setup_MITE_dma(dev); |
| if (retval) |
| return retval; |
| } |
| /* mite_dump_regs(devpriv->mite); */ |
| #endif |
| |
| switch (cmd->start_src) { |
| case TRIG_NOW: |
| /* AI_START1_Pulse */ |
| devpriv->stc_writew(dev, AI_START1_Pulse | devpriv->ai_cmd2, |
| AI_Command_2_Register); |
| s->async->inttrig = NULL; |
| break; |
| case TRIG_EXT: |
| s->async->inttrig = NULL; |
| break; |
| case TRIG_INT: |
| s->async->inttrig = &ni_ai_inttrig; |
| break; |
| } |
| |
| MDPRINTK("exit ni_ai_cmd\n"); |
| |
| return 0; |
| } |
| |
| static int ni_ai_inttrig(struct comedi_device *dev, struct comedi_subdevice *s, |
| unsigned int trignum) |
| { |
| if (trignum != 0) |
| return -EINVAL; |
| |
| devpriv->stc_writew(dev, AI_START1_Pulse | devpriv->ai_cmd2, |
| AI_Command_2_Register); |
| s->async->inttrig = NULL; |
| |
| return 1; |
| } |
| |
| static int ni_ai_config_analog_trig(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, |
| unsigned int *data); |
| |
| static int ni_ai_insn_config(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data) |
| { |
| if (insn->n < 1) |
| return -EINVAL; |
| |
| switch (data[0]) { |
| case INSN_CONFIG_ANALOG_TRIG: |
| return ni_ai_config_analog_trig(dev, s, insn, data); |
| case INSN_CONFIG_ALT_SOURCE: |
| if (boardtype.reg_type & ni_reg_m_series_mask) { |
| if (data[1] & ~(MSeries_AI_Bypass_Cal_Sel_Pos_Mask | |
| MSeries_AI_Bypass_Cal_Sel_Neg_Mask | |
| MSeries_AI_Bypass_Mode_Mux_Mask | |
| MSeries_AO_Bypass_AO_Cal_Sel_Mask)) { |
| return -EINVAL; |
| } |
| devpriv->ai_calib_source = data[1]; |
| } else if (boardtype.reg_type == ni_reg_6143) { |
| unsigned int calib_source; |
| |
| calib_source = data[1] & 0xf; |
| |
| if (calib_source > 0xF) |
| return -EINVAL; |
| |
| devpriv->ai_calib_source = calib_source; |
| ni_writew(calib_source, Calibration_Channel_6143); |
| } else { |
| unsigned int calib_source; |
| unsigned int calib_source_adjust; |
| |
| calib_source = data[1] & 0xf; |
| calib_source_adjust = (data[1] >> 4) & 0xff; |
| |
| if (calib_source >= 8) |
| return -EINVAL; |
| devpriv->ai_calib_source = calib_source; |
| if (boardtype.reg_type == ni_reg_611x) { |
| ni_writeb(calib_source_adjust, |
| Cal_Gain_Select_611x); |
| } |
| } |
| return 2; |
| default: |
| break; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int ni_ai_config_analog_trig(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, |
| unsigned int *data) |
| { |
| unsigned int a, b, modebits; |
| int err = 0; |
| |
| /* data[1] is flags |
| * data[2] is analog line |
| * data[3] is set level |
| * data[4] is reset level */ |
| if (!boardtype.has_analog_trig) |
| return -EINVAL; |
| if ((data[1] & 0xffff0000) != COMEDI_EV_SCAN_BEGIN) { |
| data[1] &= (COMEDI_EV_SCAN_BEGIN | 0xffff); |
| err++; |
| } |
| if (data[2] >= boardtype.n_adchan) { |
| data[2] = boardtype.n_adchan - 1; |
| err++; |
| } |
| if (data[3] > 255) { /* a */ |
| data[3] = 255; |
| err++; |
| } |
| if (data[4] > 255) { /* b */ |
| data[4] = 255; |
| err++; |
| } |
| /* |
| * 00 ignore |
| * 01 set |
| * 10 reset |
| * |
| * modes: |
| * 1 level: +b- +a- |
| * high mode 00 00 01 10 |
| * low mode 00 00 10 01 |
| * 2 level: (a<b) |
| * hysteresis low mode 10 00 00 01 |
| * hysteresis high mode 01 00 00 10 |
| * middle mode 10 01 01 10 |
| */ |
| |
| a = data[3]; |
| b = data[4]; |
| modebits = data[1] & 0xff; |
| if (modebits & 0xf0) { |
| /* two level mode */ |
| if (b < a) { |
| /* swap order */ |
| a = data[4]; |
| b = data[3]; |
| modebits = |
| ((data[1] & 0xf) << 4) | ((data[1] & 0xf0) >> 4); |
| } |
| devpriv->atrig_low = a; |
| devpriv->atrig_high = b; |
| switch (modebits) { |
| case 0x81: /* low hysteresis mode */ |
| devpriv->atrig_mode = 6; |
| break; |
| case 0x42: /* high hysteresis mode */ |
| devpriv->atrig_mode = 3; |
| break; |
| case 0x96: /* middle window mode */ |
| devpriv->atrig_mode = 2; |
| break; |
| default: |
| data[1] &= ~0xff; |
| err++; |
| } |
| } else { |
| /* one level mode */ |
| if (b != 0) { |
| data[4] = 0; |
| err++; |
| } |
| switch (modebits) { |
| case 0x06: /* high window mode */ |
| devpriv->atrig_high = a; |
| devpriv->atrig_mode = 0; |
| break; |
| case 0x09: /* low window mode */ |
| devpriv->atrig_low = a; |
| devpriv->atrig_mode = 1; |
| break; |
| default: |
| data[1] &= ~0xff; |
| err++; |
| } |
| } |
| if (err) |
| return -EAGAIN; |
| return 5; |
| } |
| |
| /* munge data from unsigned to 2's complement for analog output bipolar modes */ |
| static void ni_ao_munge(struct comedi_device *dev, struct comedi_subdevice *s, |
| void *data, unsigned int num_bytes, |
| unsigned int chan_index) |
| { |
| struct comedi_async *async = s->async; |
| unsigned int range; |
| unsigned int i; |
| unsigned int offset; |
| unsigned int length = num_bytes / sizeof(short); |
| short *array = data; |
| |
| offset = 1 << (boardtype.aobits - 1); |
| for (i = 0; i < length; i++) { |
| range = CR_RANGE(async->cmd.chanlist[chan_index]); |
| if (boardtype.ao_unipolar == 0 || (range & 1) == 0) |
| array[i] -= offset; |
| #ifdef PCIDMA |
| array[i] = cpu_to_le16(array[i]); |
| #endif |
| chan_index++; |
| chan_index %= async->cmd.chanlist_len; |
| } |
| } |
| |
| static int ni_m_series_ao_config_chanlist(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| unsigned int chanspec[], |
| unsigned int n_chans, int timed) |
| { |
| unsigned int range; |
| unsigned int chan; |
| unsigned int conf; |
| int i; |
| int invert = 0; |
| |
| if (timed) { |
| for (i = 0; i < boardtype.n_aochan; ++i) { |
| devpriv->ao_conf[i] &= ~MSeries_AO_Update_Timed_Bit; |
| ni_writeb(devpriv->ao_conf[i], |
| M_Offset_AO_Config_Bank(i)); |
| ni_writeb(0xf, M_Offset_AO_Waveform_Order(i)); |
| } |
| } |
| for (i = 0; i < n_chans; i++) { |
| const struct comedi_krange *krange; |
| chan = CR_CHAN(chanspec[i]); |
| range = CR_RANGE(chanspec[i]); |
| krange = s->range_table->range + range; |
| invert = 0; |
| conf = 0; |
| switch (krange->max - krange->min) { |
| case 20000000: |
| conf |= MSeries_AO_DAC_Reference_10V_Internal_Bits; |
| ni_writeb(0, M_Offset_AO_Reference_Attenuation(chan)); |
| break; |
| case 10000000: |
| conf |= MSeries_AO_DAC_Reference_5V_Internal_Bits; |
| ni_writeb(0, M_Offset_AO_Reference_Attenuation(chan)); |
| break; |
| case 4000000: |
| conf |= MSeries_AO_DAC_Reference_10V_Internal_Bits; |
| ni_writeb(MSeries_Attenuate_x5_Bit, |
| M_Offset_AO_Reference_Attenuation(chan)); |
| break; |
| case 2000000: |
| conf |= MSeries_AO_DAC_Reference_5V_Internal_Bits; |
| ni_writeb(MSeries_Attenuate_x5_Bit, |
| M_Offset_AO_Reference_Attenuation(chan)); |
| break; |
| default: |
| printk("%s: bug! unhandled ao reference voltage\n", |
| __func__); |
| break; |
| } |
| switch (krange->max + krange->min) { |
| case 0: |
| conf |= MSeries_AO_DAC_Offset_0V_Bits; |
| break; |
| case 10000000: |
| conf |= MSeries_AO_DAC_Offset_5V_Bits; |
| break; |
| default: |
| printk("%s: bug! unhandled ao offset voltage\n", |
| __func__); |
| break; |
| } |
| if (timed) |
| conf |= MSeries_AO_Update_Timed_Bit; |
| ni_writeb(conf, M_Offset_AO_Config_Bank(chan)); |
| devpriv->ao_conf[chan] = conf; |
| ni_writeb(i, M_Offset_AO_Waveform_Order(chan)); |
| } |
| return invert; |
| } |
| |
| static int ni_old_ao_config_chanlist(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| unsigned int chanspec[], |
| unsigned int n_chans) |
| { |
| unsigned int range; |
| unsigned int chan; |
| unsigned int conf; |
| int i; |
| int invert = 0; |
| |
| for (i = 0; i < n_chans; i++) { |
| chan = CR_CHAN(chanspec[i]); |
| range = CR_RANGE(chanspec[i]); |
| conf = AO_Channel(chan); |
| |
| if (boardtype.ao_unipolar) { |
| if ((range & 1) == 0) { |
| conf |= AO_Bipolar; |
| invert = (1 << (boardtype.aobits - 1)); |
| } else { |
| invert = 0; |
| } |
| if (range & 2) |
| conf |= AO_Ext_Ref; |
| } else { |
| conf |= AO_Bipolar; |
| invert = (1 << (boardtype.aobits - 1)); |
| } |
| |
| /* not all boards can deglitch, but this shouldn't hurt */ |
| if (chanspec[i] & CR_DEGLITCH) |
| conf |= AO_Deglitch; |
| |
| /* analog reference */ |
| /* AREF_OTHER connects AO ground to AI ground, i think */ |
| conf |= (CR_AREF(chanspec[i]) == |
| AREF_OTHER) ? AO_Ground_Ref : 0; |
| |
| ni_writew(conf, AO_Configuration); |
| devpriv->ao_conf[chan] = conf; |
| } |
| return invert; |
| } |
| |