| #ifndef _ASM_M32R_BITOPS_H |
| #define _ASM_M32R_BITOPS_H |
| |
| /* |
| * linux/include/asm-m32r/bitops.h |
| * |
| * Copyright 1992, Linus Torvalds. |
| * |
| * M32R version: |
| * Copyright (C) 2001, 2002 Hitoshi Yamamoto |
| * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org> |
| */ |
| |
| #ifndef _LINUX_BITOPS_H |
| #error only <linux/bitops.h> can be included directly |
| #endif |
| |
| #include <linux/compiler.h> |
| #include <asm/assembler.h> |
| #include <asm/system.h> |
| #include <asm/byteorder.h> |
| #include <asm/types.h> |
| |
| /* |
| * These have to be done with inline assembly: that way the bit-setting |
| * is guaranteed to be atomic. All bit operations return 0 if the bit |
| * was cleared before the operation and != 0 if it was not. |
| * |
| * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1). |
| */ |
| |
| /** |
| * set_bit - Atomically set a bit in memory |
| * @nr: the bit to set |
| * @addr: the address to start counting from |
| * |
| * This function is atomic and may not be reordered. See __set_bit() |
| * if you do not require the atomic guarantees. |
| * Note that @nr may be almost arbitrarily large; this function is not |
| * restricted to acting on a single-word quantity. |
| */ |
| static __inline__ void set_bit(int nr, volatile void * addr) |
| { |
| __u32 mask; |
| volatile __u32 *a = addr; |
| unsigned long flags; |
| unsigned long tmp; |
| |
| a += (nr >> 5); |
| mask = (1 << (nr & 0x1F)); |
| |
| local_irq_save(flags); |
| __asm__ __volatile__ ( |
| DCACHE_CLEAR("%0", "r6", "%1") |
| M32R_LOCK" %0, @%1; \n\t" |
| "or %0, %2; \n\t" |
| M32R_UNLOCK" %0, @%1; \n\t" |
| : "=&r" (tmp) |
| : "r" (a), "r" (mask) |
| : "memory" |
| #ifdef CONFIG_CHIP_M32700_TS1 |
| , "r6" |
| #endif /* CONFIG_CHIP_M32700_TS1 */ |
| ); |
| local_irq_restore(flags); |
| } |
| |
| /** |
| * clear_bit - Clears a bit in memory |
| * @nr: Bit to clear |
| * @addr: Address to start counting from |
| * |
| * clear_bit() is atomic and may not be reordered. However, it does |
| * not contain a memory barrier, so if it is used for locking purposes, |
| * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() |
| * in order to ensure changes are visible on other processors. |
| */ |
| static __inline__ void clear_bit(int nr, volatile void * addr) |
| { |
| __u32 mask; |
| volatile __u32 *a = addr; |
| unsigned long flags; |
| unsigned long tmp; |
| |
| a += (nr >> 5); |
| mask = (1 << (nr & 0x1F)); |
| |
| local_irq_save(flags); |
| |
| __asm__ __volatile__ ( |
| DCACHE_CLEAR("%0", "r6", "%1") |
| M32R_LOCK" %0, @%1; \n\t" |
| "and %0, %2; \n\t" |
| M32R_UNLOCK" %0, @%1; \n\t" |
| : "=&r" (tmp) |
| : "r" (a), "r" (~mask) |
| : "memory" |
| #ifdef CONFIG_CHIP_M32700_TS1 |
| , "r6" |
| #endif /* CONFIG_CHIP_M32700_TS1 */ |
| ); |
| local_irq_restore(flags); |
| } |
| |
| #define smp_mb__before_clear_bit() barrier() |
| #define smp_mb__after_clear_bit() barrier() |
| |
| /** |
| * change_bit - Toggle a bit in memory |
| * @nr: Bit to clear |
| * @addr: Address to start counting from |
| * |
| * change_bit() is atomic and may not be reordered. |
| * Note that @nr may be almost arbitrarily large; this function is not |
| * restricted to acting on a single-word quantity. |
| */ |
| static __inline__ void change_bit(int nr, volatile void * addr) |
| { |
| __u32 mask; |
| volatile __u32 *a = addr; |
| unsigned long flags; |
| unsigned long tmp; |
| |
| a += (nr >> 5); |
| mask = (1 << (nr & 0x1F)); |
| |
| local_irq_save(flags); |
| __asm__ __volatile__ ( |
| DCACHE_CLEAR("%0", "r6", "%1") |
| M32R_LOCK" %0, @%1; \n\t" |
| "xor %0, %2; \n\t" |
| M32R_UNLOCK" %0, @%1; \n\t" |
| : "=&r" (tmp) |
| : "r" (a), "r" (mask) |
| : "memory" |
| #ifdef CONFIG_CHIP_M32700_TS1 |
| , "r6" |
| #endif /* CONFIG_CHIP_M32700_TS1 */ |
| ); |
| local_irq_restore(flags); |
| } |
| |
| /** |
| * test_and_set_bit - Set a bit and return its old value |
| * @nr: Bit to set |
| * @addr: Address to count from |
| * |
| * This operation is atomic and cannot be reordered. |
| * It also implies a memory barrier. |
| */ |
| static __inline__ int test_and_set_bit(int nr, volatile void * addr) |
| { |
| __u32 mask, oldbit; |
| volatile __u32 *a = addr; |
| unsigned long flags; |
| unsigned long tmp; |
| |
| a += (nr >> 5); |
| mask = (1 << (nr & 0x1F)); |
| |
| local_irq_save(flags); |
| __asm__ __volatile__ ( |
| DCACHE_CLEAR("%0", "%1", "%2") |
| M32R_LOCK" %0, @%2; \n\t" |
| "mv %1, %0; \n\t" |
| "and %0, %3; \n\t" |
| "or %1, %3; \n\t" |
| M32R_UNLOCK" %1, @%2; \n\t" |
| : "=&r" (oldbit), "=&r" (tmp) |
| : "r" (a), "r" (mask) |
| : "memory" |
| ); |
| local_irq_restore(flags); |
| |
| return (oldbit != 0); |
| } |
| |
| /** |
| * test_and_clear_bit - Clear a bit and return its old value |
| * @nr: Bit to set |
| * @addr: Address to count from |
| * |
| * This operation is atomic and cannot be reordered. |
| * It also implies a memory barrier. |
| */ |
| static __inline__ int test_and_clear_bit(int nr, volatile void * addr) |
| { |
| __u32 mask, oldbit; |
| volatile __u32 *a = addr; |
| unsigned long flags; |
| unsigned long tmp; |
| |
| a += (nr >> 5); |
| mask = (1 << (nr & 0x1F)); |
| |
| local_irq_save(flags); |
| |
| __asm__ __volatile__ ( |
| DCACHE_CLEAR("%0", "%1", "%3") |
| M32R_LOCK" %0, @%3; \n\t" |
| "mv %1, %0; \n\t" |
| "and %0, %2; \n\t" |
| "not %2, %2; \n\t" |
| "and %1, %2; \n\t" |
| M32R_UNLOCK" %1, @%3; \n\t" |
| : "=&r" (oldbit), "=&r" (tmp), "+r" (mask) |
| : "r" (a) |
| : "memory" |
| ); |
| local_irq_restore(flags); |
| |
| return (oldbit != 0); |
| } |
| |
| /** |
| * test_and_change_bit - Change a bit and return its old value |
| * @nr: Bit to set |
| * @addr: Address to count from |
| * |
| * This operation is atomic and cannot be reordered. |
| * It also implies a memory barrier. |
| */ |
| static __inline__ int test_and_change_bit(int nr, volatile void * addr) |
| { |
| __u32 mask, oldbit; |
| volatile __u32 *a = addr; |
| unsigned long flags; |
| unsigned long tmp; |
| |
| a += (nr >> 5); |
| mask = (1 << (nr & 0x1F)); |
| |
| local_irq_save(flags); |
| __asm__ __volatile__ ( |
| DCACHE_CLEAR("%0", "%1", "%2") |
| M32R_LOCK" %0, @%2; \n\t" |
| "mv %1, %0; \n\t" |
| "and %0, %3; \n\t" |
| "xor %1, %3; \n\t" |
| M32R_UNLOCK" %1, @%2; \n\t" |
| : "=&r" (oldbit), "=&r" (tmp) |
| : "r" (a), "r" (mask) |
| : "memory" |
| ); |
| local_irq_restore(flags); |
| |
| return (oldbit != 0); |
| } |
| |
| #include <asm-generic/bitops/non-atomic.h> |
| #include <asm-generic/bitops/ffz.h> |
| #include <asm-generic/bitops/__ffs.h> |
| #include <asm-generic/bitops/fls.h> |
| #include <asm-generic/bitops/__fls.h> |
| #include <asm-generic/bitops/fls64.h> |
| |
| #ifdef __KERNEL__ |
| |
| #include <asm-generic/bitops/sched.h> |
| #include <asm-generic/bitops/find.h> |
| #include <asm-generic/bitops/ffs.h> |
| #include <asm-generic/bitops/hweight.h> |
| #include <asm-generic/bitops/lock.h> |
| |
| #endif /* __KERNEL__ */ |
| |
| #ifdef __KERNEL__ |
| |
| #include <asm-generic/bitops/ext2-non-atomic.h> |
| #include <asm-generic/bitops/ext2-atomic.h> |
| #include <asm-generic/bitops/minix.h> |
| |
| #endif /* __KERNEL__ */ |
| |
| #endif /* _ASM_M32R_BITOPS_H */ |
