| /****************************************************************************** |
| * |
| * Name: actypes.h - Common data types for the entire ACPI subsystem |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2010, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #ifndef __ACTYPES_H__ |
| #define __ACTYPES_H__ |
| |
| /* acpisrc:struct_defs -- for acpisrc conversion */ |
| |
| /* |
| * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header |
| * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of |
| * 12/2006. |
| */ |
| #ifndef ACPI_MACHINE_WIDTH |
| #error ACPI_MACHINE_WIDTH not defined |
| #endif |
| |
| /*! [Begin] no source code translation */ |
| |
| /* |
| * Data type ranges |
| * Note: These macros are designed to be compiler independent as well as |
| * working around problems that some 32-bit compilers have with 64-bit |
| * constants. |
| */ |
| #define ACPI_UINT8_MAX (UINT8) (~((UINT8) 0)) /* 0xFF */ |
| #define ACPI_UINT16_MAX (UINT16)(~((UINT16) 0)) /* 0xFFFF */ |
| #define ACPI_UINT32_MAX (UINT32)(~((UINT32) 0)) /* 0xFFFFFFFF */ |
| #define ACPI_UINT64_MAX (UINT64)(~((UINT64) 0)) /* 0xFFFFFFFFFFFFFFFF */ |
| #define ACPI_ASCII_MAX 0x7F |
| |
| /* |
| * Architecture-specific ACPICA Subsystem Data Types |
| * |
| * The goal of these types is to provide source code portability across |
| * 16-bit, 32-bit, and 64-bit targets. |
| * |
| * 1) The following types are of fixed size for all targets (16/32/64): |
| * |
| * BOOLEAN Logical boolean |
| * |
| * UINT8 8-bit (1 byte) unsigned value |
| * UINT16 16-bit (2 byte) unsigned value |
| * UINT32 32-bit (4 byte) unsigned value |
| * UINT64 64-bit (8 byte) unsigned value |
| * |
| * INT16 16-bit (2 byte) signed value |
| * INT32 32-bit (4 byte) signed value |
| * INT64 64-bit (8 byte) signed value |
| * |
| * COMPILER_DEPENDENT_UINT64/INT64 - These types are defined in the |
| * compiler-dependent header(s) and were introduced because there is no common |
| * 64-bit integer type across the various compilation models, as shown in |
| * the table below. |
| * |
| * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit |
| * char 8 8 8 8 8 8 |
| * short 16 16 16 16 16 16 |
| * _int32 32 |
| * int 32 64 32 32 16 16 |
| * long 64 64 32 32 32 32 |
| * long long 64 64 |
| * pointer 64 64 64 32 32 32 |
| * |
| * Note: ILP64 and LP32 are currently not supported. |
| * |
| * |
| * 2) These types represent the native word size of the target mode of the |
| * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are |
| * usually used for memory allocation, efficient loop counters, and array |
| * indexes. The types are similar to the size_t type in the C library and are |
| * required because there is no C type that consistently represents the native |
| * data width. ACPI_SIZE is needed because there is no guarantee that a |
| * kernel-level C library is present. |
| * |
| * ACPI_SIZE 16/32/64-bit unsigned value |
| * ACPI_NATIVE_INT 16/32/64-bit signed value |
| * |
| */ |
| |
| /******************************************************************************* |
| * |
| * Common types for all compilers, all targets |
| * |
| ******************************************************************************/ |
| |
| typedef unsigned char BOOLEAN; |
| typedef unsigned char UINT8; |
| typedef unsigned short UINT16; |
| typedef COMPILER_DEPENDENT_UINT64 UINT64; |
| typedef COMPILER_DEPENDENT_INT64 INT64; |
| |
| /*! [End] no source code translation !*/ |
| |
| /******************************************************************************* |
| * |
| * Types specific to 64-bit targets |
| * |
| ******************************************************************************/ |
| |
| #if ACPI_MACHINE_WIDTH == 64 |
| |
| /*! [Begin] no source code translation (keep the typedefs as-is) */ |
| |
| typedef unsigned int UINT32; |
| typedef int INT32; |
| |
| /*! [End] no source code translation !*/ |
| |
| typedef s64 acpi_native_int; |
| |
| typedef u64 acpi_size; |
| typedef u64 acpi_io_address; |
| typedef u64 acpi_physical_address; |
| |
| #define ACPI_MAX_PTR ACPI_UINT64_MAX |
| #define ACPI_SIZE_MAX ACPI_UINT64_MAX |
| |
| #define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */ |
| |
| /* |
| * In the case of the Itanium Processor Family (IPF), the hardware does not |
| * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag |
| * to indicate that special precautions must be taken to avoid alignment faults. |
| * (IA64 or ia64 is currently used by existing compilers to indicate IPF.) |
| * |
| * Note: Em64_t and other X86-64 processors support misaligned transfers, |
| * so there is no need to define this flag. |
| */ |
| #if defined (__IA64__) || defined (__ia64__) |
| #define ACPI_MISALIGNMENT_NOT_SUPPORTED |
| #endif |
| |
| /******************************************************************************* |
| * |
| * Types specific to 32-bit targets |
| * |
| ******************************************************************************/ |
| |
| #elif ACPI_MACHINE_WIDTH == 32 |
| |
| /*! [Begin] no source code translation (keep the typedefs as-is) */ |
| |
| typedef unsigned int UINT32; |
| typedef int INT32; |
| |
| /*! [End] no source code translation !*/ |
| |
| typedef s32 acpi_native_int; |
| |
| typedef u32 acpi_size; |
| typedef u32 acpi_io_address; |
| typedef u32 acpi_physical_address; |
| |
| #define ACPI_MAX_PTR ACPI_UINT32_MAX |
| #define ACPI_SIZE_MAX ACPI_UINT32_MAX |
| |
| #else |
| |
| /* ACPI_MACHINE_WIDTH must be either 64 or 32 */ |
| |
| #error unknown ACPI_MACHINE_WIDTH |
| #endif |
| |
| /******************************************************************************* |
| * |
| * OS-dependent types |
| * |
| * If the defaults below are not appropriate for the host system, they can |
| * be defined in the OS-specific header, and this will take precedence. |
| * |
| ******************************************************************************/ |
| |
| /* Value returned by acpi_os_get_thread_id */ |
| |
| #ifndef acpi_thread_id |
| #define acpi_thread_id acpi_size |
| #endif |
| |
| /* Flags for acpi_os_acquire_lock/acpi_os_release_lock */ |
| |
| #ifndef acpi_cpu_flags |
| #define acpi_cpu_flags acpi_size |
| #endif |
| |
| /* Object returned from acpi_os_create_cache */ |
| |
| #ifndef acpi_cache_t |
| #ifdef ACPI_USE_LOCAL_CACHE |
| #define acpi_cache_t struct acpi_memory_list |
| #else |
| #define acpi_cache_t void * |
| #endif |
| #endif |
| |
| /* |
| * Synchronization objects - Mutexes, Semaphores, and spin_locks |
| */ |
| #if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE) |
| /* |
| * These macros are used if the host OS does not support a mutex object. |
| * Map the OSL Mutex interfaces to binary semaphores. |
| */ |
| #define acpi_mutex acpi_semaphore |
| #define acpi_os_create_mutex(out_handle) acpi_os_create_semaphore (1, 1, out_handle) |
| #define acpi_os_delete_mutex(handle) (void) acpi_os_delete_semaphore (handle) |
| #define acpi_os_acquire_mutex(handle,time) acpi_os_wait_semaphore (handle, 1, time) |
| #define acpi_os_release_mutex(handle) (void) acpi_os_signal_semaphore (handle, 1) |
| #endif |
| |
| /* Configurable types for synchronization objects */ |
| |
| #ifndef acpi_spinlock |
| #define acpi_spinlock void * |
| #endif |
| |
| #ifndef acpi_semaphore |
| #define acpi_semaphore void * |
| #endif |
| |
| #ifndef acpi_mutex |
| #define acpi_mutex void * |
| #endif |
| |
| /******************************************************************************* |
| * |
| * Compiler-dependent types |
| * |
| * If the defaults below are not appropriate for the host compiler, they can |
| * be defined in the compiler-specific header, and this will take precedence. |
| * |
| ******************************************************************************/ |
| |
| /* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */ |
| |
| #ifndef acpi_uintptr_t |
| #define acpi_uintptr_t void * |
| #endif |
| |
| /* |
| * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because |
| * some compilers can catch printf format string problems |
| */ |
| #ifndef ACPI_PRINTF_LIKE |
| #define ACPI_PRINTF_LIKE(c) |
| #endif |
| |
| /* |
| * Some compilers complain about unused variables. Sometimes we don't want to |
| * use all the variables (for example, _acpi_module_name). This allows us |
| * to tell the compiler in a per-variable manner that a variable |
| * is unused |
| */ |
| #ifndef ACPI_UNUSED_VAR |
| #define ACPI_UNUSED_VAR |
| #endif |
| |
| /* |
| * All ACPICA functions that are available to the rest of the kernel are |
| * tagged with this macro which can be defined as appropriate for the host. |
| */ |
| #ifndef ACPI_EXPORT_SYMBOL |
| #define ACPI_EXPORT_SYMBOL(symbol) |
| #endif |
| |
| /****************************************************************************** |
| * |
| * ACPI Specification constants (Do not change unless the specification changes) |
| * |
| *****************************************************************************/ |
| |
| /* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */ |
| |
| #define ACPI_MAX_GPE_BLOCKS 2 |
| |
| /* Default ACPI register widths */ |
| |
| #define ACPI_GPE_REGISTER_WIDTH 8 |
| #define ACPI_PM1_REGISTER_WIDTH 16 |
| #define ACPI_PM2_REGISTER_WIDTH 8 |
| #define ACPI_PM_TIMER_WIDTH 32 |
| |
| /* Names within the namespace are 4 bytes long */ |
| |
| #define ACPI_NAME_SIZE 4 |
| #define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ |
| #define ACPI_PATH_SEPARATOR '.' |
| |
| /* Sizes for ACPI table headers */ |
| |
| #define ACPI_OEM_ID_SIZE 6 |
| #define ACPI_OEM_TABLE_ID_SIZE 8 |
| |
| /* ACPI/PNP hardware IDs */ |
| |
| #define PCI_ROOT_HID_STRING "PNP0A03" |
| #define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08" |
| |
| /* PM Timer ticks per second (HZ) */ |
| |
| #define PM_TIMER_FREQUENCY 3579545 |
| |
| /******************************************************************************* |
| * |
| * Independent types |
| * |
| ******************************************************************************/ |
| |
| /* Logical defines and NULL */ |
| |
| #ifdef FALSE |
| #undef FALSE |
| #endif |
| #define FALSE (1 == 0) |
| |
| #ifdef TRUE |
| #undef TRUE |
| #endif |
| #define TRUE (1 == 1) |
| |
| #ifndef NULL |
| #define NULL (void *) 0 |
| #endif |
| |
| /* |
| * Miscellaneous types |
| */ |
| typedef u32 acpi_status; /* All ACPI Exceptions */ |
| typedef u32 acpi_name; /* 4-byte ACPI name */ |
| typedef char *acpi_string; /* Null terminated ASCII string */ |
| typedef void *acpi_handle; /* Actually a ptr to a NS Node */ |
| |
| /* Owner IDs are used to track namespace nodes for selective deletion */ |
| |
| typedef u8 acpi_owner_id; |
| #define ACPI_OWNER_ID_MAX 0xFF |
| |
| struct uint64_struct { |
| u32 lo; |
| u32 hi; |
| }; |
| |
| union uint64_overlay { |
| u64 full; |
| struct uint64_struct part; |
| }; |
| |
| #define ACPI_INTEGER_BIT_SIZE 64 |
| #define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */ |
| |
| #if ACPI_MACHINE_WIDTH == 64 |
| #define ACPI_USE_NATIVE_DIVIDE /* Use compiler native 64-bit divide */ |
| #endif |
| |
| #define ACPI_MAX64_DECIMAL_DIGITS 20 |
| #define ACPI_MAX32_DECIMAL_DIGITS 10 |
| #define ACPI_MAX16_DECIMAL_DIGITS 5 |
| #define ACPI_MAX8_DECIMAL_DIGITS 3 |
| |
| /* PM Timer ticks per second (HZ) */ |
| |
| #define PM_TIMER_FREQUENCY 3579545 |
| |
| /* |
| * Constants with special meanings |
| */ |
| #define ACPI_ROOT_OBJECT ACPI_ADD_PTR (acpi_handle, NULL, ACPI_MAX_PTR) |
| #define ACPI_WAIT_FOREVER 0xFFFF /* u16, as per ACPI spec */ |
| #define ACPI_DO_NOT_WAIT 0 |
| |
| /* |
| * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 32 bits. |
| * In ACPI version 2 (2000) and later, integers are 64 bits. Note that this |
| * pertains to the ACPI integer type only, not to other integers used in the |
| * implementation of the ACPICA subsystem. |
| * |
| * 01/2010: This type is obsolete and has been removed from the entire ACPICA |
| * code base. It remains here for compatibility with device drivers that use |
| * the type. However, it will be removed in the future. |
| */ |
| typedef u64 acpi_integer; |
| #define ACPI_INTEGER_MAX ACPI_UINT64_MAX |
| |
| /******************************************************************************* |
| * |
| * Commonly used macros |
| * |
| ******************************************************************************/ |
| |
| /* Data manipulation */ |
| |
| #define ACPI_LOBYTE(integer) ((u8) (u16)(integer)) |
| #define ACPI_HIBYTE(integer) ((u8) (((u16)(integer)) >> 8)) |
| #define ACPI_LOWORD(integer) ((u16) (u32)(integer)) |
| #define ACPI_HIWORD(integer) ((u16)(((u32)(integer)) >> 16)) |
| #define ACPI_LODWORD(integer64) ((u32) (u64)(integer64)) |
| #define ACPI_HIDWORD(integer64) ((u32)(((u64)(integer64)) >> 32)) |
| |
| #define ACPI_SET_BIT(target,bit) ((target) |= (bit)) |
| #define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) |
| #define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) |
| #define ACPI_MAX(a,b) (((a)>(b))?(a):(b)) |
| |
| /* Size calculation */ |
| |
| #define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0])) |
| |
| /* Pointer manipulation */ |
| |
| #define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p)) |
| #define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p)) |
| #define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_size)(b))) |
| #define ACPI_PTR_DIFF(a, b) (acpi_size) (ACPI_CAST_PTR (u8, (a)) - ACPI_CAST_PTR (u8, (b))) |
| |
| /* Pointer/Integer type conversions */ |
| |
| #define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL,(acpi_size) i) |
| #define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) NULL) |
| #define ACPI_OFFSET(d, f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f), (void *) NULL) |
| #define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) |
| #define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) |
| |
| #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED |
| #define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b))) |
| #else |
| #define ACPI_COMPARE_NAME(a,b) (!ACPI_STRNCMP (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE)) |
| #endif |
| |
| /******************************************************************************* |
| * |
| * Miscellaneous constants |
| * |
| ******************************************************************************/ |
| |
| /* |
| * Initialization sequence |
| */ |
| #define ACPI_FULL_INITIALIZATION 0x00 |
| #define ACPI_NO_ADDRESS_SPACE_INIT 0x01 |
| #define ACPI_NO_HARDWARE_INIT 0x02 |
| #define ACPI_NO_EVENT_INIT 0x04 |
| #define ACPI_NO_HANDLER_INIT 0x08 |
| #define ACPI_NO_ACPI_ENABLE 0x10 |
| #define ACPI_NO_DEVICE_INIT 0x20 |
| #define ACPI_NO_OBJECT_INIT 0x40 |
| |
| /* |
| * Initialization state |
| */ |
| #define ACPI_SUBSYSTEM_INITIALIZE 0x01 |
| #define ACPI_INITIALIZED_OK 0x02 |
| |
| /* |
| * Power state values |
| */ |
| #define ACPI_STATE_UNKNOWN (u8) 0xFF |
| |
| #define ACPI_STATE_S0 (u8) 0 |
| #define ACPI_STATE_S1 (u8) 1 |
| #define ACPI_STATE_S2 (u8) 2 |
| #define ACPI_STATE_S3 (u8) 3 |
| #define ACPI_STATE_S4 (u8) 4 |
| #define ACPI_STATE_S5 (u8) 5 |
| #define ACPI_S_STATES_MAX ACPI_STATE_S5 |
| #define ACPI_S_STATE_COUNT 6 |
| |
| #define ACPI_STATE_D0 (u8) 0 |
| #define ACPI_STATE_D1 (u8) 1 |
| #define ACPI_STATE_D2 (u8) 2 |
| #define ACPI_STATE_D3 (u8) 3 |
| #define ACPI_D_STATES_MAX ACPI_STATE_D3 |
| #define ACPI_D_STATE_COUNT 4 |
| |
| #define ACPI_STATE_C0 (u8) 0 |
| #define ACPI_STATE_C1 (u8) 1 |
| #define ACPI_STATE_C2 (u8) 2 |
| #define ACPI_STATE_C3 (u8) 3 |
| #define ACPI_C_STATES_MAX ACPI_STATE_C3 |
| #define ACPI_C_STATE_COUNT 4 |
| |
| /* |
| * Sleep type invalid value |
| */ |
| #define ACPI_SLEEP_TYPE_MAX 0x7 |
| #define ACPI_SLEEP_TYPE_INVALID 0xFF |
| |
| /* |
| * Standard notify values |
| */ |
| #define ACPI_NOTIFY_BUS_CHECK (u8) 0x00 |
| #define ACPI_NOTIFY_DEVICE_CHECK (u8) 0x01 |
| #define ACPI_NOTIFY_DEVICE_WAKE (u8) 0x02 |
| #define ACPI_NOTIFY_EJECT_REQUEST (u8) 0x03 |
| #define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (u8) 0x04 |
| #define ACPI_NOTIFY_FREQUENCY_MISMATCH (u8) 0x05 |
| #define ACPI_NOTIFY_BUS_MODE_MISMATCH (u8) 0x06 |
| #define ACPI_NOTIFY_POWER_FAULT (u8) 0x07 |
| #define ACPI_NOTIFY_CAPABILITIES_CHECK (u8) 0x08 |
| #define ACPI_NOTIFY_DEVICE_PLD_CHECK (u8) 0x09 |
| #define ACPI_NOTIFY_RESERVED (u8) 0x0A |
| #define ACPI_NOTIFY_LOCALITY_UPDATE (u8) 0x0B |
| |
| #define ACPI_NOTIFY_MAX 0x0B |
| |
| /* |
| * Types associated with ACPI names and objects. The first group of |
| * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition |
| * of the ACPI object_type() operator (See the ACPI Spec). Therefore, |
| * only add to the first group if the spec changes. |
| * |
| * NOTE: Types must be kept in sync with the global acpi_ns_properties |
| * and acpi_ns_type_names arrays. |
| */ |
| typedef u32 acpi_object_type; |
| |
| #define ACPI_TYPE_ANY 0x00 |
| #define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */ |
| #define ACPI_TYPE_STRING 0x02 |
| #define ACPI_TYPE_BUFFER 0x03 |
| #define ACPI_TYPE_PACKAGE 0x04 /* byte_const, multiple data_term/Constant/super_name */ |
| #define ACPI_TYPE_FIELD_UNIT 0x05 |
| #define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */ |
| #define ACPI_TYPE_EVENT 0x07 |
| #define ACPI_TYPE_METHOD 0x08 /* Name, byte_const, multiple Code */ |
| #define ACPI_TYPE_MUTEX 0x09 |
| #define ACPI_TYPE_REGION 0x0A |
| #define ACPI_TYPE_POWER 0x0B /* Name,byte_const,word_const,multi Node */ |
| #define ACPI_TYPE_PROCESSOR 0x0C /* Name,byte_const,Dword_const,byte_const,multi nm_o */ |
| #define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */ |
| #define ACPI_TYPE_BUFFER_FIELD 0x0E |
| #define ACPI_TYPE_DDB_HANDLE 0x0F |
| #define ACPI_TYPE_DEBUG_OBJECT 0x10 |
| |
| #define ACPI_TYPE_EXTERNAL_MAX 0x10 |
| |
| /* |
| * These are object types that do not map directly to the ACPI |
| * object_type() operator. They are used for various internal purposes only. |
| * If new predefined ACPI_TYPEs are added (via the ACPI specification), these |
| * internal types must move upwards. (There is code that depends on these |
| * values being contiguous with the external types above.) |
| */ |
| #define ACPI_TYPE_LOCAL_REGION_FIELD 0x11 |
| #define ACPI_TYPE_LOCAL_BANK_FIELD 0x12 |
| #define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13 |
| #define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, ref_of, Index */ |
| #define ACPI_TYPE_LOCAL_ALIAS 0x15 |
| #define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16 |
| #define ACPI_TYPE_LOCAL_NOTIFY 0x17 |
| #define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18 |
| #define ACPI_TYPE_LOCAL_RESOURCE 0x19 |
| #define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A |
| #define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple object_list Nodes */ |
| |
| #define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */ |
| |
| /* |
| * These are special object types that never appear in |
| * a Namespace node, only in a union acpi_operand_object |
| */ |
| #define ACPI_TYPE_LOCAL_EXTRA 0x1C |
| #define ACPI_TYPE_LOCAL_DATA 0x1D |
| |
| #define ACPI_TYPE_LOCAL_MAX 0x1D |
| |
| /* All types above here are invalid */ |
| |
| #define ACPI_TYPE_INVALID 0x1E |
| #define ACPI_TYPE_NOT_FOUND 0xFF |
| |
| #define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1) |
| |
| /* |
| * All I/O |
| */ |
| #define ACPI_READ 0 |
| #define ACPI_WRITE 1 |
| #define ACPI_IO_MASK 1 |
| |
| /* |
| * Event Types: Fixed & General Purpose |
| */ |
| typedef u32 acpi_event_type; |
| |
| /* |
| * Fixed events |
| */ |
| #define ACPI_EVENT_PMTIMER 0 |
| #define ACPI_EVENT_GLOBAL 1 |
| #define ACPI_EVENT_POWER_BUTTON 2 |
| #define ACPI_EVENT_SLEEP_BUTTON 3 |
| #define ACPI_EVENT_RTC 4 |
| #define ACPI_EVENT_MAX 4 |
| #define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1 |
| |
| /* |
| * Event Status - Per event |
| * ------------- |
| * The encoding of acpi_event_status is illustrated below. |
| * Note that a set bit (1) indicates the property is TRUE |
| * (e.g. if bit 0 is set then the event is enabled). |
| * +-------------+-+-+-+ |
| * | Bits 31:3 |2|1|0| |
| * +-------------+-+-+-+ |
| * | | | | |
| * | | | +- Enabled? |
| * | | +--- Enabled for wake? |
| * | +----- Set? |
| * +----------- <Reserved> |
| */ |
| typedef u32 acpi_event_status; |
| |
| #define ACPI_EVENT_FLAG_DISABLED (acpi_event_status) 0x00 |
| #define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01 |
| #define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02 |
| #define ACPI_EVENT_FLAG_SET (acpi_event_status) 0x04 |
| #define ACPI_EVENT_FLAG_HANDLE (acpi_event_status) 0x08 |
| |
| /* |
| * General Purpose Events (GPE) |
| */ |
| #define ACPI_GPE_INVALID 0xFF |
| #define ACPI_GPE_MAX 0xFF |
| #define ACPI_NUM_GPE 256 |
| |
| /* Actions for acpi_set_gpe and acpi_hw_low_set_gpe */ |
| |
| #define ACPI_GPE_ENABLE 0 |
| #define ACPI_GPE_DISABLE 1 |
| #define ACPI_GPE_COND_ENABLE 2 |
| |
| /* gpe_types for acpi_enable_gpe and acpi_disable_gpe */ |
| |
| #define ACPI_GPE_TYPE_WAKE (u8) 0x01 |
| #define ACPI_GPE_TYPE_RUNTIME (u8) 0x02 |
| #define ACPI_GPE_TYPE_WAKE_RUN (u8) 0x03 |
| |
| /* |
| * GPE info flags - Per GPE |
| * +-------+---+-+-+ |
| * | 7:4 |3:2|1|0| |
| * +-------+---+-+-+ |
| * | | | | |
| * | | | +--- Interrupt type: edge or level triggered |
| * | | +----- GPE can wake the system |
| * | +-------- Type of dispatch:to method, handler, or none |
| * +-------------- <Reserved> |
| */ |
| #define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x01 |
| #define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x01 |
| #define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00 |
| |
| #define ACPI_GPE_CAN_WAKE (u8) 0x02 |
| |
| #define ACPI_GPE_DISPATCH_MASK (u8) 0x0C |
| #define ACPI_GPE_DISPATCH_HANDLER (u8) 0x04 |
| #define ACPI_GPE_DISPATCH_METHOD (u8) 0x08 |
| #define ACPI_GPE_DISPATCH_NOT_USED (u8) 0x00 |
| |
| /* |
| * Flags for GPE and Lock interfaces |
| */ |
| #define ACPI_NOT_ISR 0x1 |
| #define ACPI_ISR 0x0 |
| |
| /* Notify types */ |
| |
| #define ACPI_SYSTEM_NOTIFY 0x1 |
| #define ACPI_DEVICE_NOTIFY 0x2 |
| #define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY) |
| #define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3 |
| |
| #define ACPI_MAX_SYS_NOTIFY 0x7f |
| |
| /* Address Space (Operation Region) Types */ |
| |
| typedef u8 acpi_adr_space_type; |
| |
| #define ACPI_ADR_SPACE_SYSTEM_MEMORY (acpi_adr_space_type) 0 |
| #define ACPI_ADR_SPACE_SYSTEM_IO (acpi_adr_space_type) 1 |
| #define ACPI_ADR_SPACE_PCI_CONFIG (acpi_adr_space_type) 2 |
| #define ACPI_ADR_SPACE_EC (acpi_adr_space_type) 3 |
| #define ACPI_ADR_SPACE_SMBUS (acpi_adr_space_type) 4 |
| #define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5 |
| #define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6 |
| #define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7 |
| #define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 8 |
| #define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 127 |
| |
| /* |
| * bit_register IDs |
| * |
| * These values are intended to be used by the hardware interfaces |
| * and are mapped to individual bitfields defined within the ACPI |
| * registers. See the acpi_gbl_bit_register_info global table in utglobal.c |
| * for this mapping. |
| */ |
| |
| /* PM1 Status register */ |
| |
| #define ACPI_BITREG_TIMER_STATUS 0x00 |
| #define ACPI_BITREG_BUS_MASTER_STATUS 0x01 |
| #define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02 |
| #define ACPI_BITREG_POWER_BUTTON_STATUS 0x03 |
| #define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04 |
| #define ACPI_BITREG_RT_CLOCK_STATUS 0x05 |
| #define ACPI_BITREG_WAKE_STATUS 0x06 |
| #define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07 |
| |
| /* PM1 Enable register */ |
| |
| #define ACPI_BITREG_TIMER_ENABLE 0x08 |
| #define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09 |
| #define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A |
| #define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B |
| #define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C |
| #define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D |
| |
| /* PM1 Control register */ |
| |
| #define ACPI_BITREG_SCI_ENABLE 0x0E |
| #define ACPI_BITREG_BUS_MASTER_RLD 0x0F |
| #define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10 |
| #define ACPI_BITREG_SLEEP_TYPE 0x11 |
| #define ACPI_BITREG_SLEEP_ENABLE 0x12 |
| |
| /* PM2 Control register */ |
| |
| #define ACPI_BITREG_ARB_DISABLE 0x13 |
| |
| #define ACPI_BITREG_MAX 0x13 |
| #define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1 |
| |
| /* Status register values. A 1 clears a status bit. 0 = no effect */ |
| |
| #define ACPI_CLEAR_STATUS 1 |
| |
| /* Enable and Control register values */ |
| |
| #define ACPI_ENABLE_EVENT 1 |
| #define ACPI_DISABLE_EVENT 0 |
| |
| /* |
| * External ACPI object definition |
| */ |
| |
| /* |
| * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package element |
| * or an unresolved named reference. |
| */ |
| union acpi_object { |
| acpi_object_type type; /* See definition of acpi_ns_type for values */ |
| struct { |
| acpi_object_type type; /* ACPI_TYPE_INTEGER */ |
| u64 value; /* The actual number */ |
| } integer; |
| |
| struct { |
| acpi_object_type type; /* ACPI_TYPE_STRING */ |
| u32 length; /* # of bytes in string, excluding trailing null */ |
| char *pointer; /* points to the string value */ |
| } string; |
| |
| struct { |
| acpi_object_type type; /* ACPI_TYPE_BUFFER */ |
| u32 length; /* # of bytes in buffer */ |
| u8 *pointer; /* points to the buffer */ |
| } buffer; |
| |
| struct { |
| acpi_object_type type; /* ACPI_TYPE_PACKAGE */ |
| u32 count; /* # of elements in package */ |
| union acpi_object *elements; /* Pointer to an array of ACPI_OBJECTs */ |
| } package; |
| |
| struct { |
| acpi_object_type type; /* ACPI_TYPE_LOCAL_REFERENCE */ |
| acpi_object_type actual_type; /* Type associated with the Handle */ |
| acpi_handle handle; /* object reference */ |
| } reference; |
| |
| struct { |
| acpi_object_type type; /* ACPI_TYPE_PROCESSOR */ |
| u32 proc_id; |
| acpi_io_address pblk_address; |
| u32 pblk_length; |
| } processor; |
| |
| struct { |
| acpi_object_type type; /* ACPI_TYPE_POWER */ |
| u32 system_level; |
| u32 resource_order; |
| } power_resource; |
| }; |
| |
| /* |
| * List of objects, used as a parameter list for control method evaluation |
| */ |
| struct acpi_object_list { |
| u32 count; |
| union acpi_object *pointer; |
| }; |
| |
| /* |
| * Miscellaneous common Data Structures used by the interfaces |
| */ |
| #define ACPI_NO_BUFFER 0 |
| #define ACPI_ALLOCATE_BUFFER (acpi_size) (-1) |
| #define ACPI_ALLOCATE_LOCAL_BUFFER (acpi_size) (-2) |
| |
| struct acpi_buffer { |
| acpi_size length; /* Length in bytes of the buffer */ |
| void *pointer; /* pointer to buffer */ |
| }; |
| |
| /* |
| * name_type for acpi_get_name |
| */ |
| #define ACPI_FULL_PATHNAME 0 |
| #define ACPI_SINGLE_NAME 1 |
| #define ACPI_NAME_TYPE_MAX 1 |
| |
| /* |
| * Predefined Namespace items |
| */ |
| struct acpi_predefined_names { |
| char *name; |
| u8 type; |
| char *val; |
| }; |
| |
| /* |
| * Structure and flags for acpi_get_system_info |
| */ |
| #define ACPI_SYS_MODE_UNKNOWN 0x0000 |
| #define ACPI_SYS_MODE_ACPI 0x0001 |
| #define ACPI_SYS_MODE_LEGACY 0x0002 |
| #define ACPI_SYS_MODES_MASK 0x0003 |
| |
| /* |
| * System info returned by acpi_get_system_info() |
| */ |
| struct acpi_system_info { |
| u32 acpi_ca_version; |
| u32 flags; |
| u32 timer_resolution; |
| u32 reserved1; |
| u32 reserved2; |
| u32 debug_level; |
| u32 debug_layer; |
| }; |
| |
| /* Table Event Types */ |
| |
| #define ACPI_TABLE_EVENT_LOAD 0x0 |
| #define ACPI_TABLE_EVENT_UNLOAD 0x1 |
| #define ACPI_NUM_TABLE_EVENTS 2 |
| |
| /* |
| * Types specific to the OS service interfaces |
| */ |
| typedef u32(ACPI_SYSTEM_XFACE * acpi_osd_handler) (void *context); |
| |
| typedef void |
| (ACPI_SYSTEM_XFACE * acpi_osd_exec_callback) (void *context); |
| |
| /* |
| * Various handlers and callback procedures |
| */ |
| typedef u32(*acpi_event_handler) (void *context); |
| |
| typedef |
| void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context); |
| |
| typedef |
| void (*acpi_object_handler) (acpi_handle object, void *data); |
| |
| typedef acpi_status(*acpi_init_handler) (acpi_handle object, u32 function); |
| |
| #define ACPI_INIT_DEVICE_INI 1 |
| |
| typedef |
| acpi_status(*acpi_exception_handler) (acpi_status aml_status, |
| acpi_name name, |
| u16 opcode, |
| u32 aml_offset, void *context); |
| |
| /* Table Event handler (Load, load_table, etc.) and types */ |
| |
| typedef |
| acpi_status(*acpi_tbl_handler) (u32 event, void *table, void *context); |
| |
| /* Address Spaces (For Operation Regions) */ |
| |
| typedef |
| acpi_status(*acpi_adr_space_handler) (u32 function, |
| acpi_physical_address address, |
| u32 bit_width, |
| u64 *value, |
| void *handler_context, |
| void *region_context); |
| |
| #define ACPI_DEFAULT_HANDLER NULL |
| |
| typedef |
| acpi_status(*acpi_adr_space_setup) (acpi_handle region_handle, |
| u32 function, |
| void *handler_context, |
| void **region_context); |
| |
| #define ACPI_REGION_ACTIVATE 0 |
| #define ACPI_REGION_DEACTIVATE 1 |
| |
| typedef |
| acpi_status(*acpi_walk_callback) (acpi_handle object, |
| u32 nesting_level, |
| void *context, void **return_value); |
| |
| /* Interrupt handler return values */ |
| |
| #define ACPI_INTERRUPT_NOT_HANDLED 0x00 |
| #define ACPI_INTERRUPT_HANDLED 0x01 |
| |
| /* Length of 32-bit EISAID values when converted back to a string */ |
| |
| #define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */ |
| |
| /* Length of UUID (string) values */ |
| |
| #define ACPI_UUID_LENGTH 16 |
| |
| /* Structures used for device/processor HID, UID, CID */ |
| |
| struct acpica_device_id { |
| u32 length; /* Length of string + null */ |
| char *string; |
| }; |
| |
| struct acpica_device_id_list { |
| u32 count; /* Number of IDs in Ids array */ |
| u32 list_size; /* Size of list, including ID strings */ |
| struct acpica_device_id ids[1]; /* ID array */ |
| }; |
| |
| /* |
| * Structure returned from acpi_get_object_info. |
| * Optimized for both 32- and 64-bit builds |
| */ |
| struct acpi_device_info { |
| u32 info_size; /* Size of info, including ID strings */ |
| u32 name; /* ACPI object Name */ |
| acpi_object_type type; /* ACPI object Type */ |
| u8 param_count; /* If a method, required parameter count */ |
| u8 valid; /* Indicates which optional fields are valid */ |
| u8 flags; /* Miscellaneous info */ |
| u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */ |
| u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */ |
| u32 current_status; /* _STA value */ |
| u64 address; /* _ADR value */ |
| struct acpica_device_id hardware_id; /* _HID value */ |
| struct acpica_device_id unique_id; /* _UID value */ |
| struct acpica_device_id_list compatible_id_list; /* _CID list <must be last> */ |
| }; |
| |
| /* Values for Flags field above (acpi_get_object_info) */ |
| |
| #define ACPI_PCI_ROOT_BRIDGE 0x01 |
| |
| /* Flags for Valid field above (acpi_get_object_info) */ |
| |
| #define ACPI_VALID_STA 0x01 |
| #define ACPI_VALID_ADR 0x02 |
| #define ACPI_VALID_HID 0x04 |
| #define ACPI_VALID_UID 0x08 |
| #define ACPI_VALID_CID 0x10 |
| #define ACPI_VALID_SXDS 0x20 |
| #define ACPI_VALID_SXWS 0x40 |
| |
| /* Flags for _STA method */ |
| |
| #define ACPI_STA_DEVICE_PRESENT 0x01 |
| #define ACPI_STA_DEVICE_ENABLED 0x02 |
| #define ACPI_STA_DEVICE_UI 0x04 |
| #define ACPI_STA_DEVICE_FUNCTIONING 0x08 |
| #define ACPI_STA_DEVICE_OK 0x08 /* Synonym */ |
| #define ACPI_STA_BATTERY_PRESENT 0x10 |
| |
| /* Context structs for address space handlers */ |
| |
| struct acpi_pci_id { |
| u16 segment; |
| u16 bus; |
| u16 device; |
| u16 function; |
| }; |
| |
| struct acpi_mem_space_context { |
| u32 length; |
| acpi_physical_address address; |
| acpi_physical_address mapped_physical_address; |
| u8 *mapped_logical_address; |
| acpi_size mapped_length; |
| }; |
| |
| /* |
| * struct acpi_memory_list is used only if the ACPICA local cache is enabled |
| */ |
| struct acpi_memory_list { |
| char *list_name; |
| void *list_head; |
| u16 object_size; |
| u16 max_depth; |
| u16 current_depth; |
| u16 link_offset; |
| |
| #ifdef ACPI_DBG_TRACK_ALLOCATIONS |
| |
| /* Statistics for debug memory tracking only */ |
| |
| u32 total_allocated; |
| u32 total_freed; |
| u32 max_occupied; |
| u32 total_size; |
| u32 current_total_size; |
| u32 requests; |
| u32 hits; |
| #endif |
| }; |
| |
| #endif /* __ACTYPES_H__ */ |