| /* arch/arm/mach-lh7a40x/include/mach/registers.h |
| * |
| * Copyright (C) 2004 Coastal Environmental Systems |
| * Copyright (C) 2004 Logic Product Development |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <mach/constants.h> |
| |
| #ifndef __ASM_ARCH_REGISTERS_H |
| #define __ASM_ARCH_REGISTERS_H |
| |
| |
| /* Physical register base addresses */ |
| |
| #define AC97C_PHYS (0x80000000) /* AC97 Controller */ |
| #define MMC_PHYS (0x80000100) /* Multimedia Card Controller */ |
| #define USB_PHYS (0x80000200) /* USB Client */ |
| #define SCI_PHYS (0x80000300) /* Secure Card Interface */ |
| #define CSC_PHYS (0x80000400) /* Clock/State Controller */ |
| #define INTC_PHYS (0x80000500) /* Interrupt Controller */ |
| #define UART1_PHYS (0x80000600) /* UART1 Controller */ |
| #define SIR_PHYS (0x80000600) /* IR Controller, same are UART1 */ |
| #define UART2_PHYS (0x80000700) /* UART2 Controller */ |
| #define UART3_PHYS (0x80000800) /* UART3 Controller */ |
| #define DCDC_PHYS (0x80000900) /* DC to DC Controller */ |
| #define ACI_PHYS (0x80000a00) /* Audio Codec Interface */ |
| #define SSP_PHYS (0x80000b00) /* Synchronous ... */ |
| #define TIMER_PHYS (0x80000c00) /* Timer Controller */ |
| #define RTC_PHYS (0x80000d00) /* Real-time Clock */ |
| #define GPIO_PHYS (0x80000e00) /* General Purpose IO */ |
| #define BMI_PHYS (0x80000f00) /* Battery Monitor Interface */ |
| #define HRTFTC_PHYS (0x80001000) /* High-res TFT Controller (LH7A400) */ |
| #define ALI_PHYS (0x80001000) /* Advanced LCD Interface (LH7A404) */ |
| #define WDT_PHYS (0x80001400) /* Watchdog Timer */ |
| #define SMC_PHYS (0x80002000) /* Static Memory Controller */ |
| #define SDRC_PHYS (0x80002400) /* SDRAM Controller */ |
| #define DMAC_PHYS (0x80002800) /* DMA Controller */ |
| #define CLCDC_PHYS (0x80003000) /* Color LCD Controller */ |
| |
| /* Physical registers of the LH7A404 */ |
| |
| #define ADC_PHYS (0x80001300) /* A/D & Touchscreen Controller */ |
| #define VIC1_PHYS (0x80008000) /* Vectored Interrupt Controller 1 */ |
| #define USBH_PHYS (0x80009000) /* USB OHCI host controller */ |
| #define VIC2_PHYS (0x8000a000) /* Vectored Interrupt Controller 2 */ |
| |
| /*#define KBD_PHYS (0x80000e00) */ |
| /*#define LCDICP_PHYS (0x80001000) */ |
| |
| |
| /* Clock/State Controller register */ |
| |
| #define CSC_PWRSR __REG(CSC_PHYS + 0x00) /* Reset register & ID */ |
| #define CSC_PWRCNT __REG(CSC_PHYS + 0x04) /* Power control */ |
| #define CSC_CLKSET __REG(CSC_PHYS + 0x20) /* Clock speed control */ |
| #define CSC_USBDRESET __REG(CSC_PHYS + 0x4c) /* USB Device resets */ |
| |
| #define CSC_PWRCNT_USBH_EN (1<<28) /* USB Host power enable */ |
| #define CSC_PWRCNT_DMAC_M2M1_EN (1<<27) |
| #define CSC_PWRCNT_DMAC_M2M0_EN (1<<26) |
| #define CSC_PWRCNT_DMAC_M2P8_EN (1<<25) |
| #define CSC_PWRCNT_DMAC_M2P9_EN (1<<24) |
| #define CSC_PWRCNT_DMAC_M2P6_EN (1<<23) |
| #define CSC_PWRCNT_DMAC_M2P7_EN (1<<22) |
| #define CSC_PWRCNT_DMAC_M2P4_EN (1<<21) |
| #define CSC_PWRCNT_DMAC_M2P5_EN (1<<20) |
| #define CSC_PWRCNT_DMAC_M2P2_EN (1<<19) |
| #define CSC_PWRCNT_DMAC_M2P3_EN (1<<18) |
| #define CSC_PWRCNT_DMAC_M2P0_EN (1<<17) |
| #define CSC_PWRCNT_DMAC_M2P1_EN (1<<16) |
| |
| #define CSC_PWRSR_CHIPMAN_SHIFT (24) |
| #define CSC_PWRSR_CHIPMAN_MASK (0xff) |
| #define CSC_PWRSR_CHIPID_SHIFT (16) |
| #define CSC_PWRSR_CHIPID_MASK (0xff) |
| |
| #define CSC_USBDRESET_APBRESETREG (1<<1) |
| #define CSC_USBDRESET_IORESETREG (1<<0) |
| |
| /* Interrupt Controller registers */ |
| |
| #define INTC_INTSR __REG(INTC_PHYS + 0x00) /* Status */ |
| #define INTC_INTRSR __REG(INTC_PHYS + 0x04) /* Raw Status */ |
| #define INTC_INTENS __REG(INTC_PHYS + 0x08) /* Enable Set */ |
| #define INTC_INTENC __REG(INTC_PHYS + 0x0c) /* Enable Clear */ |
| |
| |
| /* Vectored Interrupted Controller registers */ |
| |
| #define VIC1_IRQSTATUS __REG(VIC1_PHYS + 0x00) |
| #define VIC1_FIQSTATUS __REG(VIC1_PHYS + 0x04) |
| #define VIC1_RAWINTR __REG(VIC1_PHYS + 0x08) |
| #define VIC1_INTSEL __REG(VIC1_PHYS + 0x0c) |
| #define VIC1_INTEN __REG(VIC1_PHYS + 0x10) |
| #define VIC1_INTENCLR __REG(VIC1_PHYS + 0x14) |
| #define VIC1_SOFTINT __REG(VIC1_PHYS + 0x18) |
| #define VIC1_SOFTINTCLR __REG(VIC1_PHYS + 0x1c) |
| #define VIC1_PROTECT __REG(VIC1_PHYS + 0x20) |
| #define VIC1_VECTADDR __REG(VIC1_PHYS + 0x30) |
| #define VIC1_NVADDR __REG(VIC1_PHYS + 0x34) |
| #define VIC1_VAD0 __REG(VIC1_PHYS + 0x100) |
| #define VIC1_VECTCNTL0 __REG(VIC1_PHYS + 0x200) |
| #define VIC2_IRQSTATUS __REG(VIC2_PHYS + 0x00) |
| #define VIC2_FIQSTATUS __REG(VIC2_PHYS + 0x04) |
| #define VIC2_RAWINTR __REG(VIC2_PHYS + 0x08) |
| #define VIC2_INTSEL __REG(VIC2_PHYS + 0x0c) |
| #define VIC2_INTEN __REG(VIC2_PHYS + 0x10) |
| #define VIC2_INTENCLR __REG(VIC2_PHYS + 0x14) |
| #define VIC2_SOFTINT __REG(VIC2_PHYS + 0x18) |
| #define VIC2_SOFTINTCLR __REG(VIC2_PHYS + 0x1c) |
| #define VIC2_PROTECT __REG(VIC2_PHYS + 0x20) |
| #define VIC2_VECTADDR __REG(VIC2_PHYS + 0x30) |
| #define VIC2_NVADDR __REG(VIC2_PHYS + 0x34) |
| #define VIC2_VAD0 __REG(VIC2_PHYS + 0x100) |
| #define VIC2_VECTCNTL0 __REG(VIC2_PHYS + 0x200) |
| |
| #define VIC_CNTL_ENABLE (0x20) |
| |
| /* USB Host registers (Open HCI compatible) */ |
| |
| #define USBH_CMDSTATUS __REG(USBH_PHYS + 0x08) |
| |
| |
| /* GPIO registers */ |
| |
| #define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* Interrupt Type 1 (Edge) */ |
| #define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* Interrupt Type 2 */ |
| #define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIO End-of-Interrupt */ |
| #define GPIO_GPIOINTEN __REG(GPIO_PHYS + 0x58) /* GPIO Interrupt Enable */ |
| #define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIO Interrupt Status */ |
| #define GPIO_PINMUX __REG(GPIO_PHYS + 0x2c) |
| #define GPIO_PADD __REG(GPIO_PHYS + 0x10) |
| #define GPIO_PAD __REG(GPIO_PHYS + 0x00) |
| #define GPIO_PCD __REG(GPIO_PHYS + 0x08) |
| #define GPIO_PCDD __REG(GPIO_PHYS + 0x18) |
| #define GPIO_PEDD __REG(GPIO_PHYS + 0x24) |
| #define GPIO_PED __REG(GPIO_PHYS + 0x20) |
| |
| |
| /* Static Memory Controller registers */ |
| |
| #define SMC_BCR0 __REG(SMC_PHYS + 0x00) /* Bank 0 Configuration */ |
| #define SMC_BCR1 __REG(SMC_PHYS + 0x04) /* Bank 1 Configuration */ |
| #define SMC_BCR2 __REG(SMC_PHYS + 0x08) /* Bank 2 Configuration */ |
| #define SMC_BCR3 __REG(SMC_PHYS + 0x0C) /* Bank 3 Configuration */ |
| #define SMC_BCR6 __REG(SMC_PHYS + 0x18) /* Bank 6 Configuration */ |
| #define SMC_BCR7 __REG(SMC_PHYS + 0x1c) /* Bank 7 Configuration */ |
| |
| |
| #ifdef CONFIG_MACH_KEV7A400 |
| # define CPLD_RD_OPT_DIP_SW __REG16(CPLD_PHYS + 0x00) /* Read Option SW */ |
| # define CPLD_WR_IO_BRD_CTL __REG16(CPLD_PHYS + 0x00) /* Write Control */ |
| # define CPLD_RD_PB_KEYS __REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */ |
| # define CPLD_LATCHED_INTS __REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */ |
| # define CPLD_CL_INT __REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */ |
| # define CPLD_BOOT_MMC_STATUS __REG16(CPLD_PHYS + 0x06) /* R/O */ |
| # define CPLD_RD_KPD_ROW_SENSE __REG16(CPLD_PHYS + 0x08) |
| # define CPLD_WR_PB_INT_MASK __REG16(CPLD_PHYS + 0x08) |
| # define CPLD_RD_BRD_DISP_SW __REG16(CPLD_PHYS + 0x0a) |
| # define CPLD_WR_EXT_INT_MASK __REG16(CPLD_PHYS + 0x0a) |
| # define CPLD_LCD_PWR_CNTL __REG16(CPLD_PHYS + 0x0c) |
| # define CPLD_SEVEN_SEG __REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */ |
| |
| #endif |
| |
| #if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) |
| |
| # define CPLD_CONTROL __REG16(CPLD02_PHYS) |
| # define CPLD_SPI_DATA __REG16(CPLD06_PHYS) |
| # define CPLD_SPI_CONTROL __REG16(CPLD08_PHYS) |
| # define CPLD_SPI_EEPROM __REG16(CPLD0A_PHYS) |
| # define CPLD_INTERRUPTS __REG16(CPLD0C_PHYS) /* IRQ mask/status */ |
| # define CPLD_BOOT_MODE __REG16(CPLD0E_PHYS) |
| # define CPLD_FLASH __REG16(CPLD10_PHYS) |
| # define CPLD_POWER_MGMT __REG16(CPLD12_PHYS) |
| # define CPLD_REVISION __REG16(CPLD14_PHYS) |
| # define CPLD_GPIO_EXT __REG16(CPLD16_PHYS) |
| # define CPLD_GPIO_DATA __REG16(CPLD18_PHYS) |
| # define CPLD_GPIO_DIR __REG16(CPLD1A_PHYS) |
| |
| #endif |
| |
| /* Timer registers */ |
| |
| #define TIMER_LOAD1 __REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */ |
| #define TIMER_VALUE1 __REG(TIMER_PHYS + 0x04) /* Timer 1 current value */ |
| #define TIMER_CONTROL1 __REG(TIMER_PHYS + 0x08) /* Timer 1 control word */ |
| #define TIMER_EOI1 __REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */ |
| |
| #define TIMER_LOAD2 __REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */ |
| #define TIMER_VALUE2 __REG(TIMER_PHYS + 0x24) /* Timer 2 current value */ |
| #define TIMER_CONTROL2 __REG(TIMER_PHYS + 0x28) /* Timer 2 control word */ |
| #define TIMER_EOI2 __REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */ |
| |
| #define TIMER_BUZZCON __REG(TIMER_PHYS + 0x40) /* Buzzer configuration */ |
| |
| #define TIMER_LOAD3 __REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */ |
| #define TIMER_VALUE3 __REG(TIMER_PHYS + 0x84) /* Timer 3 current value */ |
| #define TIMER_CONTROL3 __REG(TIMER_PHYS + 0x88) /* Timer 3 control word */ |
| #define TIMER_EOI3 __REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */ |
| |
| #define TIMER_C_ENABLE (1<<7) |
| #define TIMER_C_PERIODIC (1<<6) |
| #define TIMER_C_FREERUNNING (0) |
| #define TIMER_C_2KHZ (0x00) /* 1.986 kHz */ |
| #define TIMER_C_508KHZ (0x08) |
| |
| /* GPIO registers */ |
| |
| #define GPIO_PFDD __REG(GPIO_PHYS + 0x34) /* PF direction */ |
| #define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* IRQ edge or lvl */ |
| #define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* IRQ activ hi/lo */ |
| #define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIOF end of IRQ */ |
| #define GPIO_GPIOFINTEN __REG(GPIO_PHYS + 0x58) /* GPIOF IRQ enable */ |
| #define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIOF IRQ latch */ |
| #define GPIO_RAWINTSTATUS __REG(GPIO_PHYS + 0x60) /* GPIOF IRQ raw */ |
| |
| |
| #endif /* _ASM_ARCH_REGISTERS_H */ |
