arch/arm/mach-ixp4xx/fsg-setup.c - kernel/skids - Git at Google

 /*
  * arch/arm/mach-ixp4xx/fsg-setup.c
  *
  * FSG board-setup
  *
  * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
  *
  * based on ixdp425-setup.c:
  *	Copyright (C) 2003-2004 MontaVista Software, Inc.
  * based on nslu2-power.c
  *	Copyright (C) 2005 Tower Technologies
  *
  * Author: Rod Whitby <rod@whitby.id.au>
  * Maintainers: http://www.nslu2-linux.org/
  *
  */

 #include <linux/if_ether.h>
 #include <linux/irq.h>
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
 #include <linux/leds.h>
 #include <linux/reboot.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/gpio.h>

 #define FSG_SDA_PIN		12
 #define FSG_SCL_PIN		13

 #define FSG_SB_GPIO		4	/* sync button */
 #define FSG_RB_GPIO		9	/* reset button */
 #define FSG_UB_GPIO		10	/* usb button */

 static struct flash_platform_data fsg_flash_data = {
 	.map_name		= "cfi_probe",
 	.width			= 2,
 };

 static struct resource fsg_flash_resource = {
 	.flags			= IORESOURCE_MEM,
 };

 static struct platform_device fsg_flash = {
 	.name			= "IXP4XX-Flash",
 	.id			= 0,
 	.dev = {
 		.platform_data	= &fsg_flash_data,
 	},
 	.num_resources		= 1,
 	.resource		= &fsg_flash_resource,
 };

 static struct i2c_gpio_platform_data fsg_i2c_gpio_data = {
 	.sda_pin		= FSG_SDA_PIN,
 	.scl_pin		= FSG_SCL_PIN,
 };

 static struct platform_device fsg_i2c_gpio = {
 	.name			= "i2c-gpio",
 	.id			= 0,
 	.dev = {
 		.platform_data	= &fsg_i2c_gpio_data,
 	},
 };

 static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
 	{
 		I2C_BOARD_INFO("isl1208", 0x6f),
 	},
 };

 static struct resource fsg_uart_resources[] = {
 	{
 		.start		= IXP4XX_UART1_BASE_PHYS,
 		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
 		.start		= IXP4XX_UART2_BASE_PHYS,
 		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
 		.flags		= IORESOURCE_MEM,
 	}
 };

 static struct plat_serial8250_port fsg_uart_data[] = {
 	{
 		.mapbase	= IXP4XX_UART1_BASE_PHYS,
 		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 		.irq		= IRQ_IXP4XX_UART1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= IXP4XX_UART_XTAL,
 	},
 	{
 		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 		.irq		= IRQ_IXP4XX_UART2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= IXP4XX_UART_XTAL,
 	},
 	{ }
 };

 static struct platform_device fsg_uart = {
 	.name			= "serial8250",
 	.id			= PLAT8250_DEV_PLATFORM,
 	.dev = {
 		.platform_data	= fsg_uart_data,
 	},
 	.num_resources		= ARRAY_SIZE(fsg_uart_resources),
 	.resource		= fsg_uart_resources,
 };

 static struct platform_device fsg_leds = {
 	.name		= "fsg-led",
 	.id		= -1,
 };

 /* Built-in 10/100 Ethernet MAC interfaces */
 static struct eth_plat_info fsg_plat_eth[] = {
 	{
 		.phy		= 5,
 		.rxq		= 3,
 		.txreadyq	= 20,
 	}, {
 		.phy		= 4,
 		.rxq		= 4,
 		.txreadyq	= 21,
 	}
 };

 static struct platform_device fsg_eth[] = {
 	{
 		.name			= "ixp4xx_eth",
 		.id			= IXP4XX_ETH_NPEB,
 		.dev = {
 			.platform_data	= fsg_plat_eth,
 		},
 	}, {
 		.name			= "ixp4xx_eth",
 		.id			= IXP4XX_ETH_NPEC,
 		.dev = {
 			.platform_data	= fsg_plat_eth + 1,
 		},
 	}
 };

 static struct platform_device *fsg_devices[] __initdata = {
 	&fsg_i2c_gpio,
 	&fsg_flash,
 	&fsg_leds,
 	&fsg_eth[0],
 	&fsg_eth[1],
 };

 static irqreturn_t fsg_power_handler(int irq, void *dev_id)
 {
 	/* Signal init to do the ctrlaltdel action, this will bypass init if
 	 * it hasn't started and do a kernel_restart.
 	 */
 	ctrl_alt_del();

 	return IRQ_HANDLED;
 }

 static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
 {
 	/* This is the paper-clip reset which does an emergency reboot. */
 	printk(KERN_INFO "Restarting system.\n");
 	machine_restart(NULL);

 	/* This should never be reached. */
 	return IRQ_HANDLED;
 }

 static void __init fsg_init(void)
 {
 	uint8_t __iomem *f;

 	ixp4xx_sys_init();

 	fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 	fsg_flash_resource.end =
 		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;

 	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
 	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;

 	/* Configure CS2 for operation, 8bit and writable */
 	*IXP4XX_EXP_CS2 = 0xbfff0002;

 	i2c_register_board_info(0, fsg_i2c_board_info,
 				ARRAY_SIZE(fsg_i2c_board_info));

 	/* This is only useful on a modified machine, but it is valuable
 	 * to have it first in order to see debug messages, and so that
 	 * it does *not* get removed if platform_add_devices fails!
 	 */
 	(void)platform_device_register(&fsg_uart);

 	platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));

 	if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
 			IRQF_DISABLED | IRQF_TRIGGER_LOW,
 			"FSG reset button", NULL) < 0) {

 		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
 			gpio_to_irq(FSG_RB_GPIO));
 	}

 	if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
 			IRQF_DISABLED | IRQF_TRIGGER_LOW,
 			"FSG power button", NULL) < 0) {

 		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
 			gpio_to_irq(FSG_SB_GPIO));
 	}

 	/*
 	 * Map in a portion of the flash and read the MAC addresses.
 	 * Since it is stored in BE in the flash itself, we need to
 	 * byteswap it if we're in LE mode.
 	 */
 	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
 	if (f) {
 #ifdef __ARMEB__
 		int i;
 		for (i = 0; i < 6; i++) {
 			fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
 			fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
 		}
 #else

 		/*
 		  Endian-swapped reads from unaligned addresses are
 		  required to extract the two MACs from the big-endian
 		  Redboot config area in flash.
 		*/

 		fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421);
 		fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420);
 		fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427);
 		fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426);
 		fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425);
 		fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424);

 		fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439);
 		fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F);
 		fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E);
 		fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D);
 		fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C);
 		fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443);
 #endif
 		iounmap(f);
 	}
 	printk(KERN_INFO "FSG: Using MAC address %pM for port 0\n",
 	       fsg_plat_eth[0].hwaddr);
 	printk(KERN_INFO "FSG: Using MAC address %pM for port 1\n",
 	       fsg_plat_eth[1].hwaddr);

 }

 MACHINE_START(FSG, "Freecom FSG-3")
 	/* Maintainer: www.nslu2-linux.org */
 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= fsg_init,
 MACHINE_END
	/*
	* arch/arm/mach-ixp4xx/fsg-setup.c
	*
	* FSG board-setup
	*
	* Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
	*
	* based on ixdp425-setup.c:
	* Copyright (C) 2003-2004 MontaVista Software, Inc.
	* based on nslu2-power.c
	* Copyright (C) 2005 Tower Technologies
	*
	* Author: Rod Whitby <rod@whitby.id.au>
	* Maintainers: http://www.nslu2-linux.org/
	*
	*/

	#include <linux/if_ether.h>
	#include <linux/irq.h>
	#include <linux/serial.h>
	#include <linux/serial_8250.h>
	#include <linux/leds.h>
	#include <linux/reboot.h>
	#include <linux/i2c.h>
	#include <linux/i2c-gpio.h>
	#include <linux/io.h>
	#include <asm/mach-types.h>
	#include <asm/mach/arch.h>
	#include <asm/mach/flash.h>
	#include <asm/gpio.h>

	#define FSG_SDA_PIN 12
	#define FSG_SCL_PIN 13

	#define FSG_SB_GPIO 4 /* sync button */
	#define FSG_RB_GPIO 9 /* reset button */
	#define FSG_UB_GPIO 10 /* usb button */

	static struct flash_platform_data fsg_flash_data = {
	.map_name = "cfi_probe",
	.width = 2,
	};

	static struct resource fsg_flash_resource = {
	.flags = IORESOURCE_MEM,
	};

	static struct platform_device fsg_flash = {
	.name = "IXP4XX-Flash",
	.id = 0,
	.dev = {
	.platform_data = &fsg_flash_data,
	},
	.num_resources = 1,
	.resource = &fsg_flash_resource,
	};

	static struct i2c_gpio_platform_data fsg_i2c_gpio_data = {
	.sda_pin = FSG_SDA_PIN,
	.scl_pin = FSG_SCL_PIN,
	};

	static struct platform_device fsg_i2c_gpio = {
	.name = "i2c-gpio",
	.id = 0,
	.dev = {
	.platform_data = &fsg_i2c_gpio_data,
	},
	};

	static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
	{
	I2C_BOARD_INFO("isl1208", 0x6f),
	},
	};

	static struct resource fsg_uart_resources[] = {
	{
	.start = IXP4XX_UART1_BASE_PHYS,
	.end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
	.flags = IORESOURCE_MEM,
	},
	{
	.start = IXP4XX_UART2_BASE_PHYS,
	.end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
	.flags = IORESOURCE_MEM,
	}
	};

	static struct plat_serial8250_port fsg_uart_data[] = {
	{
	.mapbase = IXP4XX_UART1_BASE_PHYS,
	.membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
	.irq = IRQ_IXP4XX_UART1,
	.flags = UPF_BOOT_AUTOCONF \| UPF_SKIP_TEST,
	.iotype = UPIO_MEM,
	.regshift = 2,
	.uartclk = IXP4XX_UART_XTAL,
	},
	{
	.mapbase = IXP4XX_UART2_BASE_PHYS,
	.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
	.irq = IRQ_IXP4XX_UART2,
	.flags = UPF_BOOT_AUTOCONF \| UPF_SKIP_TEST,
	.iotype = UPIO_MEM,
	.regshift = 2,
	.uartclk = IXP4XX_UART_XTAL,
	},
	{ }
	};

	static struct platform_device fsg_uart = {
	.name = "serial8250",
	.id = PLAT8250_DEV_PLATFORM,
	.dev = {
	.platform_data = fsg_uart_data,
	},
	.num_resources = ARRAY_SIZE(fsg_uart_resources),
	.resource = fsg_uart_resources,
	};

	static struct platform_device fsg_leds = {
	.name = "fsg-led",
	.id = -1,
	};

	/* Built-in 10/100 Ethernet MAC interfaces */
	static struct eth_plat_info fsg_plat_eth[] = {
	{
	.phy = 5,
	.rxq = 3,
	.txreadyq = 20,
	}, {
	.phy = 4,
	.rxq = 4,
	.txreadyq = 21,
	}
	};

	static struct platform_device fsg_eth[] = {
	{
	.name = "ixp4xx_eth",
	.id = IXP4XX_ETH_NPEB,
	.dev = {
	.platform_data = fsg_plat_eth,
	},
	}, {
	.name = "ixp4xx_eth",
	.id = IXP4XX_ETH_NPEC,
	.dev = {
	.platform_data = fsg_plat_eth + 1,
	},
	}
	};

	static struct platform_device *fsg_devices[] __initdata = {
	&fsg_i2c_gpio,
	&fsg_flash,
	&fsg_leds,
	&fsg_eth[0],
	&fsg_eth[1],
	};

	static irqreturn_t fsg_power_handler(int irq, void *dev_id)
	{
	/* Signal init to do the ctrlaltdel action, this will bypass init if
	* it hasn't started and do a kernel_restart.
	*/
	ctrl_alt_del();

	return IRQ_HANDLED;
	}

	static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
	{
	/* This is the paper-clip reset which does an emergency reboot. */
	printk(KERN_INFO "Restarting system.\n");
	machine_restart(NULL);

	/* This should never be reached. */
	return IRQ_HANDLED;
	}

	static void __init fsg_init(void)
	{
	uint8_t __iomem *f;

	ixp4xx_sys_init();

	fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
	fsg_flash_resource.end =
	IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;

	*IXP4XX_EXP_CS0 \|= IXP4XX_FLASH_WRITABLE;
	IXP4XX_EXP_CS1 = IXP4XX_EXP_CS0;

	/* Configure CS2 for operation, 8bit and writable */
	*IXP4XX_EXP_CS2 = 0xbfff0002;

	i2c_register_board_info(0, fsg_i2c_board_info,
	ARRAY_SIZE(fsg_i2c_board_info));

	/* This is only useful on a modified machine, but it is valuable
	* to have it first in order to see debug messages, and so that
	* it does not get removed if platform_add_devices fails!
	*/
	(void)platform_device_register(&fsg_uart);

	platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));

	if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
	IRQF_DISABLED \| IRQF_TRIGGER_LOW,
	"FSG reset button", NULL) < 0) {

	printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
	gpio_to_irq(FSG_RB_GPIO));
	}

	if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
	IRQF_DISABLED \| IRQF_TRIGGER_LOW,
	"FSG power button", NULL) < 0) {

	printk(KERN_DEBUG "Power Button IRQ %d not available\n",
	gpio_to_irq(FSG_SB_GPIO));
	}

	/*
	* Map in a portion of the flash and read the MAC addresses.
	* Since it is stored in BE in the flash itself, we need to
	* byteswap it if we're in LE mode.
	*/
	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
	if (f) {
	#ifdef __ARMEB__
	int i;
	for (i = 0; i < 6; i++) {
	fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
	fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
	}
	#else

	/*
	Endian-swapped reads from unaligned addresses are
	required to extract the two MACs from the big-endian
	Redboot config area in flash.
	*/

	fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421);
	fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420);
	fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427);
	fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426);
	fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425);
	fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424);

	fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439);
	fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F);
	fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E);
	fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D);
	fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C);
	fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443);
	#endif
	iounmap(f);
	}
	printk(KERN_INFO "FSG: Using MAC address %pM for port 0\n",
	fsg_plat_eth[0].hwaddr);
	printk(KERN_INFO "FSG: Using MAC address %pM for port 1\n",
	fsg_plat_eth[1].hwaddr);

	}

	MACHINE_START(FSG, "Freecom FSG-3")
	/* Maintainer: www.nslu2-linux.org */
	.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
	.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
	.map_io = ixp4xx_map_io,
	.init_irq = ixp4xx_init_irq,
	.timer = &ixp4xx_timer,
	.boot_params = 0x0100,
	.init_machine = fsg_init,
	MACHINE_END