| /*SH1 |
| ******************************************************************************* |
| ** ** |
| ** Copyright (c) 2010 Quantenna Communications Inc ** |
| ** All Rights Reserved ** |
| ** ** |
| ** Author : Quantenna Communications Inc ** |
| ** File : shared_params.h ** |
| ** Description : ** |
| ** ** |
| ******************************************************************************* |
| ** ** |
| ** Redistribution and use in source and binary forms, with or without ** |
| ** modification, are permitted provided that the following conditions ** |
| ** are met: ** |
| ** 1. Redistributions of source code must retain the above copyright ** |
| ** notice, this list of conditions and the following disclaimer. ** |
| ** 2. Redistributions in binary form must reproduce the above copyright ** |
| ** notice, this list of conditions and the following disclaimer in the ** |
| ** documentation and/or other materials provided with the distribution. ** |
| ** 3. The name of the author may not be used to endorse or promote products ** |
| ** derived from this software without specific prior written permission. ** |
| ** ** |
| ** Alternatively, this software may be distributed under the terms of the ** |
| ** GNU General Public License ("GPL") version 2, or (at your option) any ** |
| ** later version as published by the Free Software Foundation. ** |
| ** ** |
| ** In the case this software is distributed under the GPL license, ** |
| ** you should have received a copy of the GNU General Public License ** |
| ** along with this software; if not, write to the Free Software ** |
| ** Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ** |
| ** ** |
| ** THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR ** |
| ** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES** |
| ** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ** |
| ** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ** |
| ** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ** |
| ** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,** |
| ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ** |
| ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** |
| ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ** |
| ** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ** |
| ** ** |
| ******************************************************************************* |
| EH1*/ |
| |
| #ifndef _SHARED_DEFS_H_ |
| #define _SHARED_DEFS_H_ |
| |
| #include "shared_defs_common.h" |
| |
| #define QTN_SWITCH_CHANNEL_TIME_AVG 3750 /* microseconds */ |
| |
| #define IEEE80211_MAX_NAV 32767 |
| |
| /* SCS (ACI/CCI Detection and Mitigation) APIs */ |
| enum qtn_vap_scs_cmds { |
| IEEE80211_SCS_SET_ENABLE = 1, |
| IEEE80211_SCS_SET_DEBUG_ENABLE, |
| IEEE80211_SCS_SET_SAMPLE_ENABLE, |
| IEEE80211_SCS_SET_SAMPLE_DWELL_TIME, |
| IEEE80211_SCS_SET_SAMPLE_INTERVAL, |
| IEEE80211_SCS_SET_THRSHLD_SMPL_PKTNUM, |
| IEEE80211_SCS_SET_THRSHLD_PRI_CCA, |
| IEEE80211_SCS_SET_THRSHLD_SEC_CCA, |
| IEEE80211_SCS_SET_THRSHLD_SMPL_AIRTIME, |
| IEEE80211_SCS_SET_WF_CCA, |
| IEEE80211_SCS_SET_WF_RSSI, |
| IEEE80211_SCS_SET_WF_CRC_ERR, |
| IEEE80211_SCS_SET_WF_LPRE, |
| IEEE80211_SCS_SET_WF_SPRE, |
| IEEE80211_SCS_SET_WF_RETRIES, |
| IEEE80211_SCS_SET_WF_DFS, |
| IEEE80211_SCS_SET_WF_MAX_TX_PWR, |
| IEEE80211_SCS_SET_REPORT_ONLY, |
| IEEE80211_SCS_SET_CCA_INTF_RATIO, |
| IEEE80211_SCS_SET_CCA_IDLE_THRSHLD, |
| IEEE80211_SCS_SET_CCA_INTF_LO_THR, |
| IEEE80211_SCS_SET_CCA_INTF_HI_THR, |
| IEEE80211_SCS_SET_CCA_SMPL_DUR, |
| IEEE80211_SCS_GET_REPORT, |
| IEEE80211_SCS_GET_INTERNAL_STATS, |
| IEEE80211_SCS_SET_CCA_INTF_SMTH_FCTR, |
| IEEE80211_SCS_RESET_RANKING_TABLE, |
| IEEE80211_SCS_SET_CHAN_MTRC_MRGN, |
| IEEE80211_SCS_SET_RSSI_SMTH_FCTR, |
| IEEE80211_SCS_SET_ATTEN_ADJUST, |
| IEEE80211_SCS_SET_ATTEN_SWITCH_ENABLE, |
| IEEE80211_SCS_SET_THRSHLD_ATTEN_INC, |
| IEEE80211_SCS_SET_THRSHLD_DFS_REENTRY, |
| IEEE80211_SCS_SET_THRSHLD_DFS_REENTRY_MINRATE, |
| IEEE80211_SCS_SET_PMBL_ERR_SMTH_FCTR, |
| IEEE80211_SCS_SET_PMBL_ERR_RANGE, |
| IEEE80211_SCS_SET_PMBL_ERR_MAPPED_INTF_RANGE, |
| IEEE80211_SCS_SET_THRSHLD_LOAD, |
| IEEE80211_SCS_SET_PMBL_ERR_WF, |
| IEEE80211_SCS_SET_THRSHLD_AGING_NOR, |
| IEEE80211_SCS_SET_THRSHLD_AGING_DFSREENT, |
| IEEE80211_SCS_SET_THRSHLD_DFS_REENTRY_INTF, |
| IEEE80211_SCS_SET_PMP_RPT_CCA_SMTH_FCTR, |
| IEEE80211_SCS_SET_PMP_RX_TIME_SMTH_FCTR, |
| IEEE80211_SCS_SET_PMP_TX_TIME_SMTH_FCTR, |
| IEEE80211_SCS_SET_PMP_STATS_STABLE_PERCENT, |
| IEEE80211_SCS_SET_PMP_STATS_STABLE_RANGE, |
| IEEE80211_SCS_SET_PMP_STATS_CLEAR_INTERVAL, |
| IEEE80211_SCS_SET_PMP_TXTIME_COMPENSATION, |
| IEEE80211_SCS_SET_PMP_RXTIME_COMPENSATION, |
| IEEE80211_SCS_SET_PMP_TDLSTIME_COMPENSATION, |
| IEEE80211_SCS_SET_SWITCH_CHANNEL_MANUALLY, |
| IEEE80211_SCS_SET_AS_RX_TIME_SMTH_FCTR, |
| IEEE80211_SCS_SET_AS_TX_TIME_SMTH_FCTR, |
| IEEE80211_SCS_SET_STATS_START, |
| IEEE80211_SCS_SET_CCA_IDLE_SMTH_FCTR, |
| IEEE80211_SCS_SET_PMBL_ERR_THRSHLD, |
| IEEE80211_SCS_SET_CCA_INTF_DFS_MARGIN, |
| IEEE80211_SCS_SET_LEAVE_DFS_CHAN_MTRC_MRGN, |
| IEEE80211_SCS_SET_MAX |
| }; |
| |
| #define IEEE80211_SCS_STATE_INIT 0 |
| #define IEEE80211_SCS_STATE_RESET 1 |
| #define IEEE80211_SCS_STATE_CHANNEL_SWITCHING 2 |
| #define IEEE80211_SCS_STATE_MEASUREMENT_CHANGE_CLEAN 3 /* param change */ |
| #define IEEE80211_SCS_STATE_PERIOD_CLEAN 4 |
| |
| #define IEEE80211_SCS_COMPARE_INIT_TIMER 5 |
| #define IEEE80211_SCS_COMPARE_TIMER_INTVAL 2 |
| #define IEEE80211_CCA_SAMPLE_DUR IEEE80211_SCS_COMPARE_TIMER_INTVAL /* seconds */ |
| #define IEEE80211_SCS_CHAN_CURRENT 0 |
| #define IEEE80211_SCS_CHAN_ALL 0xFF |
| #define IEEE80211_SCS_THRSHLD_MAX 100 /* metric */ |
| #define IEEE80211_SCS_THRSHLD_MIN 1 /* metric */ |
| #define IEEE80211_SCS_SMPL_DWELL_TIME_MAX 24 /* milliseconds, limited by max NAV reservation */ |
| #define IEEE80211_SCS_SMPL_DWELL_TIME_MIN 5 /* milliseconds */ |
| #define IEEE80211_SCS_SMPL_DWELL_TIME_DEFAULT 10 /* milliseconds */ |
| #define IEEE80211_SCS_SMPL_INTV_MAX 3600 /* seconds */ |
| #define IEEE80211_SCS_SMPL_INTV_MIN 1 /* seconds */ |
| #define IEEE80211_SCS_SMPL_INTV_DEFAULT 5 /* seconds */ |
| #define IEEE80211_SCS_THRSHLD_SMPL_PKTNUM_DEFAULT 16 /* packet number */ |
| #define IEEE80211_SCS_THRSHLD_SMPL_PKTNUM_MAX 1000 /* packet number */ |
| #define IEEE80211_SCS_THRSHLD_SMPL_PKTNUM_MIN 1 /* packet number */ |
| #define IEEE80211_SCS_THRSHLD_SMPL_AIRTIME_DEFAULT 200 /* ms */ |
| #define IEEE80211_SCS_THRSHLD_SMPL_AIRTIME_MAX 1000 /* ms */ |
| #define IEEE80211_SCS_THRSHLD_SMPL_AIRTIME_MIN 1 /* ms */ |
| #define IEEE80211_SCS_THRSHLD_PMBL_ERR_MAX 10000 /* count */ |
| #define IEEE80211_SCS_THRSHLD_PMBL_ERR_MIN 1 /* count */ |
| |
| /* |
| * Packet rate threshold is determined by how many packets we can hold in buffer without drop |
| * during off-channel period. It is limited by: |
| * - sw queue length of each node/tid |
| * - global resource shared by all node/tid, such as tqew descriptors and msdu headers. |
| * Current value doesn't apply to the scenario when tqew descriptors are already used up by large |
| * number of stations. |
| */ |
| #define IEEE80211_SCS_THRSHLD_SMPL_TX_PKTRATE (1024 - 128) /* margin = 128 + hw ring size */ |
| #define IEEE80211_SCS_THRSHLD_SMPL_RX_PKTRATE IEEE80211_SCS_THRSHLD_SMPL_TX_PKTRATE /* assume qtn peer */ |
| #define IEEE80211_SCS_THRSHLD_ATTEN_INC_DFT 5 /* db */ |
| #define IEEE80211_SCS_THRSHLD_ATTEN_INC_MIN 0 /* db */ |
| #define IEEE80211_SCS_THRSHLD_ATTEN_INC_MAX 20 /* db */ |
| #define IEEE80211_SCS_THRSHLD_DFS_REENTRY_DFT 60 /* seconds */ |
| #define IEEE80211_SCS_THRSHLD_DFS_REENTRY_MIN 0 /* seconds */ |
| #define IEEE80211_SCS_THRSHLD_DFS_REENTRY_MAX 0xffff /* seconds */ |
| #define IEEE80211_SCS_THRSHLD_DFS_REENTRY_INTF_MIN 0 |
| #define IEEE80211_SCS_THRSHLD_DFS_REENTRY_INTF_MAX 100 |
| #define IEEE80211_SCS_THRSHLD_DFS_REENTRY_INTF_DFT 40 |
| #define IEEE80211_SCS_THRSHLD_DFS_REENTRY_MINRATE_UNIT 100 /* kbps */ |
| #define IEEE80211_SCS_THRSHLD_DFS_REENTRY_MINRATE_DFT 5 /* unit: 100kbps */ |
| #define IEEE80211_SCS_THRSHLD_DFS_REENTRY_MINRATE_MIN 0 /* unit: 100kbps */ |
| #define IEEE80211_SCS_THRSHLD_DFS_REENTRY_MINRATE_MAX 0xffff /* unit: 100kbps */ |
| #define IEEE80211_SCS_THRSHLD_AGING_MIN 0 |
| #define IEEE80211_SCS_THRSHLD_AGING_MAX 0xFFFF |
| #define IEEE80211_SCS_THRSHLD_AGING_NOR_DFT (60 * 6) |
| #define IEEE80211_SCS_THRSHLD_AGING_DFSREENT_DFT 5 |
| #define IEEE80211_SCS_CCA_DUR_MAX 10 /* seconds */ |
| #define IEEE80211_SCS_CCA_DUR_MIN 2 /* seconds */ |
| #define IEEE80211_SCS_CCA_INTF_SCALE 1000 /* milliseconds */ |
| #define IEEE80211_SCS_SENDING_QOSNULL_TIME_AVG 1000 /* microseconds */ |
| #define IEEE80211_SCS_SMPL_TIME_MARGIN 2000 /* microseconds */ |
| #define IEEE80211_SCS_SMPL_TIME_OFFSET_SEND_QOSNULL 5000 /* microseconds */ |
| #define IEEE80211_SCS_SMPL_TIME_SENDING_ALL_BEACONS 25000 /* microseconds, the time duration for transmitting all beacons */ |
| #define IEEE80211_CCA_INTF_SMTH_FCTR_NOXP_DFT 75 |
| #define IEEE80211_CCA_INTF_SMTH_FCTR_XPED_DFT 90 |
| #define IEEE80211_CCA_INTF_SMTH_FCTR_MIN 0 |
| #define IEEE80211_CCA_INTF_SMTH_FCTR_MAX 100 |
| #define IEEE80211_SCS_CHAN_MTRC_MRGN_MAX 100 |
| #define IEEE80211_SCS_CHAN_MTRC_MRGN_DFT 15 |
| #define IEEE80211_SCS_LEAVE_DFS_CHAN_MTRC_MRGN_DFT 25 |
| #define IEEE80211_SCS_RSSI_SMTH_FCTR_UP_DFT 75 |
| #define IEEE80211_SCS_RSSI_SMTH_FCTR_DOWN_DFT 25 |
| #define IEEE80211_SCS_RSSI_SMTH_FCTR_MAX 100 |
| #define IEEE80211_SCS_ATTEN_ADJUST_MIN -20 |
| #define IEEE80211_SCS_ATTEN_ADJUST_MAX 20 |
| #define IEEE80211_SCS_ATTEN_ADJUST_DFT 5 |
| #define IEEE80211_SCS_BRCM_RXGLITCH_THRSHLD_SCALE_DFT 40 |
| #define IEEE80211_SCS_PMBL_ERR_SMTH_FCTR_MIN 0 |
| #define IEEE80211_SCS_PMBL_ERR_SMTH_FCTR_MAX 100 |
| #define IEEE80211_SCS_PMBL_ERR_SMTH_FCTR_DFT 66 |
| #define IEEE80211_SCS_CCA_IDLE_SMTH_FCTR_MIN 0 |
| #define IEEE80211_SCS_CCA_IDLE_SMTH_FCTR_MAX 100 |
| #define IEEE80211_SCS_CCA_IDLE_SMTH_FCTR_DFT 50 |
| #define IEEE80211_SCS_PMP_RPT_CCA_SMTH_FCTR_MAX 100 |
| #define IEEE80211_SCS_PMP_RPT_CCA_SMTH_FCTR_DFT 66 |
| #define IEEE80211_SCS_PMP_RX_TIME_SMTH_FCTR_MAX 100 |
| #define IEEE80211_SCS_PMP_RX_TIME_SMTH_FCTR_DFT 66 |
| #define IEEE80211_SCS_PMP_TX_TIME_SMTH_FCTR_MAX 100 |
| #define IEEE80211_SCS_PMP_TX_TIME_SMTH_FCTR_DFT 66 |
| #define IEEE80211_SCS_PMP_STATS_STABLE_PERCENT_MAX 100 |
| #define IEEE80211_SCS_PMP_STATS_STABLE_PERCENT_DFT 30 |
| #define IEEE80211_SCS_PMP_STATS_STABLE_RANGE_MAX 1000 |
| #define IEEE80211_SCS_PMP_STATS_STABLE_RANGE_DFT 50 |
| #define IEEE80211_SCS_PMP_STATS_CLEAR_INTERVAL_MAX 3600 /* seconds */ |
| #define IEEE80211_SCS_PMP_STATS_CLEAR_INTERVAL_DFT 60 /* seconds */ |
| #define IEEE80211_SCS_AS_RX_TIME_SMTH_FCTR_MAX 100 |
| #define IEEE80211_SCS_AS_RX_TIME_SMTH_FCTR_DFT 50 |
| #define IEEE80211_SCS_AS_TX_TIME_SMTH_FCTR_MAX 100 |
| #define IEEE80211_SCS_AS_TX_TIME_SMTH_FCTR_DFT 50 |
| |
| #define IEEE80211_SCS_SMTH_RBS_TIME 80 |
| |
| #define IEEE80211_SCS_PMBL_ERR_RANGE_MIN 1000 |
| #define IEEE80211_SCS_PMBL_ERR_RANGE_MAX 0xFFFF |
| #define IEEE80211_SCS_PMBL_ERR_RANGE_DFT 5000 |
| #define IEEE80211_SCS_PMBL_ERR_MAPPED_INTF_RANGE_MIN 0 |
| #define IEEE80211_SCS_PMBL_ERR_MAPPED_INTF_RANGE_MAX 100 |
| #define IEEE80211_SCS_PMBL_ERR_MAPPED_INTF_RANGE_DFT 40 |
| #define IEEE80211_SCS_PMBL_ERR_WF_MIN 0 |
| #define IEEE80211_SCS_PMBL_ERR_WF_MAX 100 |
| #define IEEE80211_SCS_PMBL_SHORT_WF_DFT 0 |
| #define IEEE80211_SCS_PMBL_LONG_WF_DFT 100 |
| #define IEEE80211_SCS_THRSHLD_LOADED_MIN 0 |
| #define IEEE80211_SCS_THRSHLD_LOADED_MAX 1000 |
| #define IEEE80211_SCS_THRSHLD_LOADED_DFT 20 |
| |
| #define IEEE80211_SCS_CHAN_POWER_CUTPOINT 15 |
| #define IEEE80211_SCS_NORMALIZE(_v, _duration) (((_v) < (0xFFFFFFFF / IEEE80211_SCS_CCA_INTF_SCALE)) ? \ |
| ((_v) * IEEE80211_SCS_CCA_INTF_SCALE / (_duration)) : \ |
| ((_v) / (_duration) * IEEE80211_SCS_CCA_INTF_SCALE)) |
| |
| #define IEEE80211_SCS_SMOOTH(_old, _new, _fctr) (((_old) * (_fctr) + (_new) * (100 - (_fctr))) / 100) |
| |
| #define IEEE80211_SCS_OFFCHAN_WHOLE_DUR(_dwell_us) ((_dwell_us) + \ |
| (2 * QTN_SWITCH_CHANNEL_TIME_AVG) + \ |
| IEEE80211_SCS_SENDING_QOSNULL_TIME_AVG + \ |
| IEEE80211_SCS_SMPL_TIME_MARGIN) |
| |
| #define IEEE80211_SCS_VALUE_S 0 |
| #define IEEE80211_SCS_VALUE_M 0xffff |
| #define IEEE80211_SCS_WF_VALUE_M 0xff |
| #define IEEE80211_SCS_COMMAND_S 16 |
| #define IEEE80211_SCS_COMMAND_M 0xffff |
| |
| #define IEEE80211_SCS_NA_CC 0x0 |
| #define IEEE80211_SCS_STA_CCA_REQ_CC 0x1 |
| #define IEEE80211_SCS_SELF_CCA_CC 0x2 |
| #define IEEE80211_SCS_ATTEN_INC_CC 0x4 |
| #define IEEE80211_SCS_BRCM_STA_TRIGGER_CC 0x8 |
| #define IEEE80211_SCS_CCA_INTF_CC (IEEE80211_SCS_STA_CCA_REQ_CC | IEEE80211_SCS_SELF_CCA_CC) |
| #define IEEE80211_SCS_INTF_CC (IEEE80211_SCS_CCA_INTF_CC | IEEE80211_SCS_BRCM_STA_TRIGGER_CC) |
| |
| #define IEEE80211_REMAIN_CHAN_MIN_RSV_PERD 2 |
| |
| enum ieee80211_scs_update_mode { |
| IEEE80211_SCS_OFFCHAN, /* off-channel, use smoothing and omit current channel */ |
| IEEE80211_SCS_COCHAN, /* co-channel mode */ |
| IEEE80211_SCS_INIT_SCAN, /* like off-channel but include current channel */ |
| }; |
| |
| #define SCSLOG_CRIT 0 |
| #define SCSLOG_NOTICE 1 |
| #define SCSLOG_INFO 2 |
| #define SCSLOG_VERBOSE 3 |
| #define SCSLOG_LEVEL_MAX 3 |
| #if !defined(MUC_BUILD) && !defined(DSP_BUILD) && !defined(AUC_BUILD) |
| #define SCSDBG(_level, _fmt, ...) do { \ |
| if (ic->ic_scs.scs_debug_enable >= (_level)) { \ |
| DBGFN("SCS: " _fmt, ##__VA_ARGS__); \ |
| } \ |
| } while (0) |
| #endif |
| |
| |
| /* OCAC (Off-channel CAC) APIs */ |
| enum qtn_ocac_cmds { |
| IEEE80211_OCAC_SET_ENABLE = 1, |
| IEEE80211_OCAC_SET_DISABLE, |
| IEEE80211_OCAC_SET_DEBUG_LEVEL, |
| IEEE80211_OCAC_SET_DWELL_TIME, |
| IEEE80211_OCAC_SET_DURATION, |
| IEEE80211_OCAC_SET_THRESHOLD_FAT, |
| IEEE80211_OCAC_SET_DUMP_COUNTS, |
| IEEE80211_OCAC_SET_CAC_TIME, |
| IEEE80211_OCAC_SET_THRESHOLD_TRAFFIC, |
| IEEE80211_OCAC_SET_TIMER_INTERVAL, |
| IEEE80211_OCAC_SET_DUMP_TSFLOG, |
| IEEE80211_OCAC_SET_DUMP_CFG, |
| IEEE80211_OCAC_SET_TRAFFIC_CONTROL, |
| IEEE80211_OCAC_SET_THRESHOLD_CCA_INTF, |
| IEEE80211_OCAC_SET_REPORT_ONLY, |
| IEEE80211_OCAC_SET_DUMP_CCA_COUNTS, |
| IEEE80211_OCAC_SET_OFFSET_TXHALT, |
| IEEE80211_OCAC_SET_OFFSET_OFFCHAN, |
| IEEE80211_OCAC_SET_THRESHOLD_FAT_DEC, |
| IEEE80211_OCAC_SET_TIMER_EXPIRE_INIT, |
| IEEE80211_OCAC_SET_SECURE_DWELL_TIME, |
| IEEE80211_OCAC_SET_BEACON_INTERVAL, |
| IEEE80211_OCAC_SET_WEATHER_DURATION, |
| IEEE80211_OCAC_SET_WEATHER_CAC_TIME, |
| IEEE80211_OCAC_SET_WEATHER_DWELL_TIME, |
| IEEE80211_OCAC_SET_MAX |
| }; |
| |
| enum qtn_ocac_get_cmds { |
| IEEE80211_OCAC_GET_STATUS = 1, |
| IEEE80211_OCAC_GET_AVAILABILITY, |
| }; |
| |
| #define IEEE80211_OCAC_CLEAN_STATS_STOP 0 |
| #define IEEE80211_OCAC_CLEAN_STATS_START 1 |
| #define IEEE80211_OCAC_CLEAN_STATS_RESET 2 |
| |
| |
| #define IEEE80211_OCAC_DWELL_TIME_MIN 5 /* milliseconds */ |
| #define IEEE80211_OCAC_DWELL_TIME_MAX 200 /* milliseconds */ |
| #define IEEE80211_OCAC_DWELL_TIME_DEFAULT 40 /* milliseconds */ |
| #define IEEE80211_OCAC_WEA_DWELL_TIME_DEFAULT 20 /* milliseconds */ |
| |
| #define IEEE80211_OCAC_SECURE_DWELL_TIME_MIN 5 /* milliseconds */ |
| #define IEEE80211_OCAC_SECURE_DWELL_TIME_MAX 23 /* milliseconds */ |
| #define IEEE80211_OCAC_SECURE_DWELL_TIME_DEFAULT 23 /* milliseconds */ |
| |
| #define IEEE80211_OCAC_DURATION_MIN 1 /* seconds */ |
| #define IEEE80211_OCAC_DURATION_MAX 64800 /* seconds */ |
| #define IEEE80211_OCAC_DURATION_DEFAULT 720 /* seconds */ |
| |
| #define IEEE80211_OCAC_CAC_TIME_MIN 1 /* seconds */ |
| #define IEEE80211_OCAC_CAC_TIME_MAX 64800 /* seconds */ |
| #define IEEE80211_OCAC_CAC_TIME_DEFAULT 240 /* seconds */ |
| |
| #define IEEE80211_OCAC_WEA_DURATION_MIN 60 /* seconds */ |
| #define IEEE80211_OCAC_WEA_DURATION_MAX 86400 /* seconds */ |
| #define IEEE80211_OCAC_WEA_DURATION_DEFAULT 11520 /* seconds */ |
| |
| #define IEEE80211_OCAC_WEA_CAC_TIME_MIN 1 /* seconds */ |
| #define IEEE80211_OCAC_WEA_CAC_TIME_MAX 86400 /* seconds */ |
| #define IEEE80211_OCAC_WEA_CAC_TIME_DEFAULT 1920 /* seconds */ |
| |
| #define IEEE80211_OCAC_THRESHOLD_FAT_MIN 1 /* percent */ |
| #define IEEE80211_OCAC_THRESHOLD_FAT_MAX 100 /* percent */ |
| #define IEEE80211_OCAC_THRESHOLD_FAT_DEFAULT 90 /* percent */ |
| |
| #define IEEE80211_OCAC_THRESHOLD_TRAFFIC_MIN 1 /* percent */ |
| #define IEEE80211_OCAC_THRESHOLD_TRAFFIC_MAX 100 /* percent */ |
| #define IEEE80211_OCAC_THRESHOLD_TRAFFIC_DEFAULT 30 /* percent */ |
| |
| #define IEEE80211_OCAC_OFFSET_TXHALT_MIN 2 /* milliseconds */ |
| #define IEEE80211_OCAC_OFFSET_TXHALT_MAX 80 /* milliseconds */ |
| #define IEEE80211_OCAC_OFFSET_TXHALT_DEFAULT 10 /* milliseconds */ |
| |
| #define IEEE80211_OCAC_OFFSET_OFFCHAN_MIN 2 /* milliseconds */ |
| #define IEEE80211_OCAC_OFFSET_OFFCHAN_MAX 80 /* milliseconds */ |
| #define IEEE80211_OCAC_OFFSET_OFFCHAN_DEFAULT 5 /* milliseconds */ |
| |
| #define IEEE80211_OCAC_TRAFFIC_CTRL_DEFAULT 1 /* on */ |
| |
| #define IEEE80211_OCAC_THRESHOLD_CCA_INTF_MIN 1 /* percent */ |
| #define IEEE80211_OCAC_THRESHOLD_CCA_INTF_MAX 100 /* percent */ |
| #define IEEE80211_OCAC_THRESHOLD_CCA_INTF_DEFAULT 20 /* percent */ |
| |
| #define IEEE80211_OCAC_THRESHOLD_FAT_DEC_MIN 1 /* percent */ |
| #define IEEE80211_OCAC_THRESHOLD_FAT_DEC_MAX 100 /* percent */ |
| #define IEEE80211_OCAC_THRESHOLD_FAT_DEC_DEFAULT 10 /* percent */ |
| |
| #define IEEE80211_OCAC_TIMER_INTERVAL_MIN 1 /* seconds */ |
| #define IEEE80211_OCAC_TIMER_INTERVAL_MAX 100 /* seconds */ |
| #define IEEE80211_OCAC_TIMER_INTERVAL_DEFAULT 2 /* seconds */ |
| |
| #define IEEE80211_OCAC_BEACON_INTERVAL_MIN 100 /* TUs */ |
| #define IEEE80211_OCAC_BEACON_INTERVAL_MAX 1000 /* TUs */ |
| #define IEEE80211_OCAC_BEACON_INTERVAL_DEFAULT 100 /* TUs */ |
| |
| #define IEEE80211_OCAC_TIMER_EXPIRE_INIT_MIN 1 /* seconds */ |
| #define IEEE80211_OCAC_TIMER_EXPIRE_INIT_MAX 65000 /* seconds */ |
| #define IEEE80211_OCAC_TIMER_EXPIRE_INIT_DEFAULT 2 /* seconds */ |
| |
| #define IEEE80211_OBSS_PASSIVE_DWELL_DEFAULT 20 |
| #define IEEE80211_OBSS_ACTIVE_DWELL_DEFAULT 10 |
| #define IEEE80211_OBSS_TRIGGER_INTERVAL_DEFAULT 200 |
| #define IEEE80211_OBSS_PASSIVE_TOTAL_DEFAULT 200 |
| #define IEEE80211_OBSS_ACTIVE_TOTAL_DEFAULT 20 |
| #define IEEE80211_OBSS_CHANNEL_WIDTH_DELAY_DEFAULT 5 |
| #define IEEE80211_OBSS_ACTIVITY_THRESHOLD_DEFAULT 25 |
| |
| #define IEEE80211_OCAC_VALUE_S 0 |
| #define IEEE80211_OCAC_VALUE_M 0xffff |
| #define IEEE80211_OCAC_COMMAND_S 16 |
| #define IEEE80211_OCAC_COMMAND_M 0xffff |
| #define IEEE80211_OCAC_COMPRESS_VALUE_F 0x8000 |
| #define IEEE80211_OCAC_COMPRESS_VALUE_M 0x7fff |
| |
| #define IEEE80211_OCAC_TIME_MARGIN 2000 /* microseconds */ |
| |
| #define OCACLOG_CRIT 0 |
| #define OCACLOG_WARNING 1 |
| #define OCACLOG_NOTICE 2 |
| #define OCACLOG_INFO 3 |
| #define OCACLOG_VERBOSE 4 |
| #define OCACLOG_LEVEL_MAX 4 |
| #if !defined(MUC_BUILD) && !defined(DSP_BUILD) && !defined(AUC_BUILD) |
| #define OCACDBG(_level, _fmt, ...) do { \ |
| if (ic->ic_ocac.ocac_cfg.ocac_debug_level >= (_level)) { \ |
| DBGFN("DFS_s_radio: " _fmt, ##__VA_ARGS__); \ |
| } \ |
| } while (0) |
| #endif |
| |
| #define QTN_M2A_EVENT_TYPE_DTIM 1 |
| #define QTN_M2A_PS_EVENT_PM_ENABLE 2 /* enable power management */ |
| #define QTN_M2A_PS_EVENT_PM_DISABLE 3 /* disable power management */ |
| #define QTN_M2A_PS_EVENT_PS_POLL 4 /* ps poll */ |
| #define QTN_M2A_EVENT_TYPE_UAPSD_SP 5 /* U-APSD SP */ |
| #define QTN_M2A_EVENT_PTID_FLAG_SET 6 /* Set per-TID flag(muc) */ |
| #define QTN_M2A_EVENT_TYPE_TXBA_DISABLE 7 /* per VAP TX BA est control */ |
| |
| /* Common definitions for flags used to indicate ieee80211_node's states */ |
| #define IEEE80211_NODE_AUTH 0x0001 /* authorized for data */ |
| #define IEEE80211_NODE_QOS 0x0002 /* QoS enabled */ |
| #define IEEE80211_NODE_ERP 0x0004 /* ERP enabled */ |
| #define IEEE80211_NODE_HT 0x0008 /* HT enabled */ |
| /* NB: this must have the same value as IEEE80211_FC1_PWR_MGT */ |
| #define IEEE80211_NODE_PWR_MGT 0x0010 /* power save mode enabled */ |
| #define IEEE80211_NODE_PS_DELIVERING 0x0040 /* STA out of PS, getting delivery */ |
| #define IEEE80211_NODE_PS_POLL 0x0080 /* power save ps poll mode */ |
| #define IEEE80211_NODE_AREF 0x0020 /* authentication ref held */ |
| #define IEEE80211_NODE_2_TX_CHAINS 0x0400 /* this node needs to use 2 TX chain only, for IOT purpose */ |
| #define IEEE80211_NODE_UAPSD 0x1000 |
| #define IEEE80211_NODE_WDS_PEER 0x2000 /* this node is the wds peer in a wds vap */ |
| #define IEEE80211_NODE_VHT 0x4000 /* VHT enabled */ |
| #define IEEE80211_NODE_TPC 0x8000 /* indicate tpc capability */ |
| |
| /* Common definitions for ext_flags */ |
| #define IEEE80211_NODE_TDLS_PTI_REQ 0x0001 /* Should sending PTI request to peer */ |
| #define IEEE80211_NODE_TDLS_PTI_PENDING 0x0002 /* PTI request xmit to peer but not responsed */ |
| #define IEEE80211_NODE_UAPSD_SP_IN_PROGRESS 0x0004 /* U-APSD SP in progress */ |
| #define IEEE80211_NODE_TDLS_PTI_RESP 0x0008 /* PTI response frame received */ |
| |
| #define IEEE80211_NODE_TDLS_MASK 0x000B /* Mask for TDLS bits */ |
| |
| #define QTN_VAP_PRIORITY_RESERVED 2 /* reserve the low values for internal use */ |
| #define QTN_VAP_PRIORITY_NUM 4 |
| #define QTN_VAP_PRIORITY_MGMT (QTN_VAP_PRIORITY_RESERVED + QTN_VAP_PRIORITY_NUM) |
| #define QTN_TACMAP_HW_PRI_NUM 8 /* hw limitation for 128 node mode */ |
| #define QTN_TACMAP_PRI_PER_VAP 8 /* for maximum 8 TIDs */ |
| #define QTN_TACMAP_SW_PRI_BASE 64 /* values below this are used for "bad apple" nodes */ |
| |
| /* Quantenna specific flags (ni_qtn_flags), do not modify in Auc */ |
| #define QTN_IS_BCM_NODE 0x0000001 |
| #define QTN_IS_INTEL_5100_NODE 0x0000002 |
| #define QTN_IS_INTEL_5300_NODE 0x0000004 |
| #define QTN_IS_GALAXY_NOTE_4_NODE 0x0000008 |
| #define QTN_IS_NOT_4ADDR_CAPABLE_NODE 0x0000010 |
| #define QTN_AC_BE_INHERITANCE_UPTO_VO 0x0000020 |
| #define QTN_AC_BE_INHERITANCE_UPTO_VI 0x0000040 |
| #define QTN_IS_INTEL_NODE 0x0000080 |
| #define QTN_IS_REALTEK_NODE 0x0000100 |
| #define QTN_NODE_TX_RESTRICTED 0x0000200 /* restricted tx enabled */ |
| #define QTN_NODE_TX_RESTRICT_RTS 0x0000400 /* use RTS to confirm node is lost */ |
| #define QTN_IS_NO_RXAMSDU_NO_BF_NODE 0x0000800 |
| #define QTN_NODE_RXAMSDU_SUPPORT 0x0001000 /* node support TX amsdu */ |
| #define QTN_NODE_11N_TXAMSDU_OFF 0x0002000 |
| #define QTN_NODE_TXOP_RESTRICTED 0x0004000 |
| /* |
| * Bits that can be updated again by Lhost after association creation. Explicit definition helps |
| * avoid overwriting bits maintained by MuC itself. |
| */ |
| #define QTN_FLAGS_UPDATABLE_BITS (QTN_IS_INTEL_NODE) |
| |
| /* QTN bandwidth definition - make sure this is up-to-date with regards |
| * to txbf_common.h |
| */ |
| #define QTN_BW_20M 0 |
| #define QTN_BW_40M 1 |
| #define QTN_BW_80M 2 |
| #define QTN_BW_MAX QTN_BW_80M |
| |
| #define QTN_MAILBOX_INVALID 0xffffffff /* Invalid value to indicate mailbox is disabled */ |
| |
| enum ni_tdls_status { |
| IEEE80211_TDLS_NODE_STATUS_NONE = 0, |
| IEEE80211_TDLS_NODE_STATUS_INACTIVE = 1, |
| IEEE80211_TDLS_NODE_STATUS_STARTING = 2, |
| IEEE80211_TDLS_NODE_STATUS_ACTIVE = 3, |
| IEEE80211_TDLS_NODE_STATUS_IDLE = 4 |
| }; |
| |
| /* WoWLAN APIs */ |
| enum qtn_vap_wowlan_cmds { |
| IEEE80211_WOWLAN_HOST_POWER_SAVE = 1, |
| IEEE80211_WOWLAN_MATCH_TYPE, |
| IEEE80211_WOWLAN_L2_ETHER_TYPE, |
| IEEE80211_WOWLAN_L3_UDP_PORT, |
| IEEE80211_WOWLAN_MAGIC_PATTERN, |
| IEEE80211_WOWLAN_MAGIC_PATTERN_GET, |
| IEEE80211_WOWLAN_SET_MAX |
| }; |
| /* |
| * Definitions relating to individual fields from phy_stats, |
| * shared between the Q driver and the APIs. |
| */ |
| |
| /* |
| * Error Sum needs to be reported together with the corresponding Number of |
| * Symbols; getting them in separate operations would introduce a race condition |
| * where the Error Sum and the Number of Symbols came from different |
| * PHY stat blocks. |
| */ |
| |
| #define QTN_PHY_AVG_ERROR_SUM_NSYM_NAME "avg_error_sum_nsym" |
| |
| #define QTN_PHY_EVM_MANTISSA_SHIFT 5 |
| #define QTN_PHY_EVM_EXPONENT_MASK 0x1f |
| |
| enum qtn_phy_stat_field { |
| QTN_PHY_NOSUCH_FIELD = -1, |
| QTN_PHY_AVG_ERROR_SUM_NSYM_FIELD, |
| }; |
| |
| #define QTN_M2A_TX_SCALE_BITS 4 |
| #define QTN_M2A_TX_SCALE_MASK ((1 << QTN_M2A_TX_SCALE_BITS) - 1) |
| |
| /* only for little endian */ |
| #if defined(AUC_BUILD) |
| #define U64_LOW32(_v) ((uint32_t)(_v)) |
| #define U64_HIGH32(_v) ((uint32_t)((_v) >> 32)) |
| #else |
| #define U64_LOW32(_v) (((uint32_t*)&(_v))[0]) |
| #define U64_HIGH32(_v) (((uint32_t*)&(_v))[1]) |
| #endif |
| |
| #define U64_COMPARE_GE(_a, _b) ((U64_HIGH32(_a) > U64_HIGH32(_b)) || \ |
| ((U64_HIGH32(_a) == U64_HIGH32(_b)) && (U64_LOW32(_a) >= U64_LOW32(_b)))) |
| |
| #define U64_COMPARE_GT(_a, _b) ((U64_HIGH32(_a) > U64_HIGH32(_b)) || \ |
| ((U64_HIGH32(_a) == U64_HIGH32(_b)) && (U64_LOW32(_a) > U64_LOW32(_b)))) |
| |
| #define U64_COMPARE_LE(_a, _b) ((U64_HIGH32(_a) < U64_HIGH32(_b)) || \ |
| ((U64_HIGH32(_a) == U64_HIGH32(_b)) && (U64_LOW32(_a) <= U64_LOW32(_b)))) |
| |
| #define U64_COMPARE_LT(_a, _b) ((U64_HIGH32(_a) < U64_HIGH32(_b)) || \ |
| ((U64_HIGH32(_a) == U64_HIGH32(_b)) && (U64_LOW32(_a) < U64_LOW32(_b)))) |
| |
| #ifndef MAC2STR |
| #define MAC2STR(a) (a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5] |
| #define MACSTR "%02X:%02X:%02X:%02X:%02X:%02X" |
| #define MACSTRL "%02x:%02x:%02x:%02x:%02x:%02x" /* for MuC and Auc which don't support "X" */ |
| #endif |
| |
| /* |
| * VSP/QTM |
| * Macro TOPAZ_QTM is used to help identify changes between original VSP and QTM. |
| * In Lhost kernel driver, it must be used within CONFIG_QVSP(in kernel .config). |
| * CONFIG_QVSP TOPAZ_QTM ruby topaz |
| * Y 1 invalid *QTM works |
| * Y 0 *VSP works VSP alive but doesn't work for HDP |
| * N 1 invalid *no VSP/QTM |
| * N 0 *no VSP no VSP/QTM, and no QTM changes in MuC and AuC |
| * So generally, sololy changing CONFIG_QVSP works for both ruby and topaz as indicated by *. |
| * But to throughly clean QTM code in AuC and MuC, disable TOPAZ_QTM in topaz below. |
| */ |
| #define TOPAZ_QTM 1 |
| |
| #define COMPILE_TIME_ASSERT(constant_expr) \ |
| do { \ |
| switch(0) { \ |
| case 0: \ |
| case constant_expr: \ |
| ; \ |
| } \ |
| } while(0) |
| |
| /**@addtogroup DFSAPIs |
| *@{*/ |
| /** |
| * Reason for channel change |
| */ |
| enum ieee80211_csw_reason { |
| /** |
| * Reason is unknown |
| */ |
| IEEE80211_CSW_REASON_UNKNOWN, |
| /** |
| * Smart channel selection |
| */ |
| IEEE80211_CSW_REASON_SCS, |
| /** |
| * Radar detection |
| */ |
| IEEE80211_CSW_REASON_DFS, |
| /** |
| * Channel set by user |
| */ |
| IEEE80211_CSW_REASON_MANUAL, |
| /** |
| * Configuration change |
| */ |
| IEEE80211_CSW_REASON_CONFIG, |
| /** |
| * Scan initiated by user |
| */ |
| IEEE80211_CSW_REASON_SCAN, |
| /** |
| * Off-channel CAC |
| */ |
| IEEE80211_CSW_REASON_OCAC, |
| /** |
| * Channel switch announcement |
| */ |
| IEEE80211_CSW_REASON_CSA, |
| /** |
| * TDLS Channel switch announcement |
| */ |
| IEEE80211_CSW_REASON_TDLS_CS, |
| /** |
| * Number of values |
| */ |
| IEEE80211_CSW_REASON_MAX |
| }; |
| /**@}*/ |
| |
| /* |
| * Reasons for channel switches that are not recorded and therefore |
| * should not be listed in QCSAPI documentation |
| */ |
| enum ieee80211_csw_reason_private { |
| IEEE80211_CSW_REASON_SAMPLING = IEEE80211_CSW_REASON_MAX, |
| IEEE80211_CSW_REASON_OCAC_RUN, |
| IEEE80211_CSW_REASON_BGSCAN, |
| }; |
| |
| /* Keep this in sync with swfeat_desc */ |
| enum swfeat { |
| SWFEAT_ID_MODE_AP, |
| SWFEAT_ID_MODE_STA, |
| SWFEAT_ID_MODE_REPEATER, |
| SWFEAT_ID_PCIE_RC, |
| SWFEAT_ID_VHT, |
| SWFEAT_ID_2X2, |
| SWFEAT_ID_2X4, |
| SWFEAT_ID_3X3, |
| SWFEAT_ID_4X4, |
| SWFEAT_ID_HS20, |
| SWFEAT_ID_WPA2_ENT, |
| SWFEAT_ID_MESH, |
| SWFEAT_ID_TDLS, |
| SWFEAT_ID_OCAC, |
| SWFEAT_ID_QHOP, |
| SWFEAT_ID_QSV, |
| SWFEAT_ID_QSV_NEIGH, |
| SWFEAT_ID_MU_MIMO, |
| SWFEAT_ID_DUAL_CHAN_VIRT, |
| SWFEAT_ID_DUAL_CHAN, |
| SWFEAT_ID_DUAL_BAND_VIRT, |
| SWFEAT_ID_DUAL_BAND, |
| SWFEAT_ID_QTM_PRIO, |
| SWFEAT_ID_QTM, |
| SWFEAT_ID_SPEC_ANALYZER, |
| SWFEAT_ID_MAX |
| }; |
| |
| #define SWFEAT_MAP_SIZE (SWFEAT_ID_MAX / 8 + 1) |
| |
| /* Used to scale temperature measurements */ |
| #define QDRV_TEMPSENS_COEFF 100000 |
| #define QDRV_TEMPSENS_COEFF10 (10 * QDRV_TEMPSENS_COEFF) |
| |
| /* Aligns the supplied size to the specified power_of_two */ |
| #define QTN_ALIGN_TO(size_to_align, power_of_two) \ |
| (((size_to_align) + (power_of_two) - 1) & ~((power_of_two) - 1)) |
| |
| #define FIELD_ARRAY_SIZE(t, a) (sizeof((((t*)0)->a))/sizeof(((((t*)0)->a))[0])) |
| |
| #endif /* _SHARED_DEFS_H_ */ |
