<section id="media-controller-types">
<title>Types and flags used to represent the media graph elements</title>

    <table frame="none" pgwide="1" id="media-entity-type">
      <title>Media entity types</title>
      <tgroup cols="2">
	<colspec colname="c1"/>
	<colspec colname="c2"/>
	<tbody valign="top">
	  <row>
	    <entry><constant>MEDIA_ENT_F_UNKNOWN</constant> and <constant>MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN</constant></entry>
	    <entry>Unknown entity. That generally indicates that
	    a driver didn't initialize properly the entity, with is a Kernel bug</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_IO_V4L</constant></entry>
	    <entry>Data streaming input and/or output entity.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_IO_VBI</constant></entry>
	    <entry>V4L VBI streaming input or output entity</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_IO_SWRADIO</constant></entry>
	    <entry>V4L Software Digital Radio (SDR) streaming input or output entity</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_IO_DTV</constant></entry>
	    <entry>DVB Digital TV streaming input or output entity</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_DTV_DEMOD</constant></entry>
	    <entry>Digital TV demodulator entity.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_TS_DEMUX</constant></entry>
	    <entry>MPEG Transport stream demux entity. Could be implemented on hardware or in Kernelspace by the Linux DVB subsystem.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_DTV_CA</constant></entry>
	    <entry>Digital TV Conditional Access module (CAM) entity</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_DTV_NET_DECAP</constant></entry>
	    <entry>Digital TV network ULE/MLE desencapsulation entity. Could be implemented on hardware or in Kernelspace</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_CONN_RF</constant></entry>
	    <entry>Connector for a Radio Frequency (RF) signal.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_CONN_SVIDEO</constant></entry>
	    <entry>Connector for a S-Video signal.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_CONN_COMPOSITE</constant></entry>
	    <entry>Connector for a RGB composite signal.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_CAM_SENSOR</constant></entry>
	    <entry>Camera video sensor entity.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_FLASH</constant></entry>
	    <entry>Flash controller entity.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_LENS</constant></entry>
	    <entry>Lens controller entity.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_ATV_DECODER</constant></entry>
	    <entry>Analog video decoder, the basic function of the video decoder
	    is to accept analogue video from a wide variety of sources such as
	    broadcast, DVD players, cameras and video cassette recorders, in
	    either NTSC, PAL, SECAM or HD format, separating the stream
	    into its component parts, luminance and chrominance, and output
	    it in some digital video standard, with appropriate timing
	    signals.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_TUNER</constant></entry>
	    <entry>Digital TV, analog TV, radio and/or software radio tuner,
		   with consists on a PLL tuning stage that converts radio
		   frequency (RF) signal into an Intermediate Frequency (IF).
		   Modern tuners have internally IF-PLL decoders for audio
		   and video, but older models have those stages implemented
		   on separate entities.
	    </entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_IF_VID_DECODER</constant></entry>
	    <entry>IF-PLL video decoder. It receives the IF from a PLL
		   and decodes the analog TV video signal. This is commonly
		   found on some very old analog tuners, like Philips MK3
		   designs. They all contain a tda9887 (or some software
		   compatible similar chip, like tda9885). Those devices
		   use a different I2C address than the tuner PLL.
	    </entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_IF_AUD_DECODER</constant></entry>
	    <entry>IF-PLL sound decoder. It receives the IF from a PLL
		   and decodes the analog TV audio signal. This is commonly
		   found on some very old analog hardware, like Micronas
		   msp3400, Philips tda9840, tda985x, etc. Those devices
		   use a different I2C address than the tuner PLL and
		   should be controlled together with the IF-PLL video
		   decoder.
	    </entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_AUDIO_CAPTURE</constant></entry>
	    <entry>Audio Capture Function Entity.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_AUDIO_PLAYBACK</constant></entry>
	    <entry>Audio Playback Function Entity.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_F_AUDIO_MIXER</constant></entry>
	    <entry>Audio Mixer Function Entity.</entry>
	  </row>
	</tbody>
      </tgroup>
    </table>

    <table frame="none" pgwide="1" id="media-entity-flag">
      <title>Media entity flags</title>
      <tgroup cols="2">
	<colspec colname="c1"/>
	<colspec colname="c2"/>
	<tbody valign="top">
	  <row>
	    <entry><constant>MEDIA_ENT_FL_DEFAULT</constant></entry>
	    <entry>Default entity for its type. Used to discover the default
	    audio, VBI and video devices, the default camera sensor, ...</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_ENT_FL_CONNECTOR</constant></entry>
	    <entry>The entity represents a data conector</entry>
	  </row>
	</tbody>
      </tgroup>
    </table>

    <table frame="none" pgwide="1" id="media-intf-type">
      <title>Media interface types</title>
      <tgroup cols="3">
	<colspec colname="c1"/>
	<colspec colname="c2"/>
	<colspec colname="c3"/>
	<tbody valign="top">
	  <row>
	    <entry><constant>MEDIA_INTF_T_DVB_FE</constant></entry>
	    <entry>Device node interface for the Digital TV frontend</entry>
	    <entry>typically, /dev/dvb/adapter?/frontend?</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_DVB_DEMUX</constant></entry>
	    <entry>Device node interface for the Digital TV demux</entry>
	    <entry>typically, /dev/dvb/adapter?/demux?</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_DVB_DVR</constant></entry>
	    <entry>Device node interface for the Digital TV DVR</entry>
	    <entry>typically, /dev/dvb/adapter?/dvr?</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_DVB_CA</constant></entry>
	    <entry>Device node interface for the Digital TV Conditional Access</entry>
	    <entry>typically, /dev/dvb/adapter?/ca?</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_DVB_FE</constant></entry>
	    <entry>Device node interface for the Digital TV network control</entry>
	    <entry>typically, /dev/dvb/adapter?/net?</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_V4L_VIDEO</constant></entry>
	    <entry>Device node interface for video (V4L)</entry>
	    <entry>typically, /dev/video?</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_V4L_VBI</constant></entry>
	    <entry>Device node interface for VBI (V4L)</entry>
	    <entry>typically, /dev/vbi?</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_V4L_RADIO</constant></entry>
	    <entry>Device node interface for radio (V4L)</entry>
	    <entry>typically, /dev/vbi?</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_V4L_SUBDEV</constant></entry>
	    <entry>Device node interface for a V4L subdevice</entry>
	    <entry>typically, /dev/v4l-subdev?</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_V4L_SWRADIO</constant></entry>
	    <entry>Device node interface for Software Defined Radio (V4L)</entry>
	    <entry>typically, /dev/swradio?</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_ALSA_PCM_CAPTURE</constant></entry>
	    <entry>Device node interface for ALSA PCM Capture</entry>
	    <entry>typically, /dev/snd/pcmC?D?c</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_ALSA_PCM_PLAYBACK</constant></entry>
	    <entry>Device node interface for ALSA PCM Playback</entry>
	    <entry>typically, /dev/snd/pcmC?D?p</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_ALSA_CONTROL</constant></entry>
	    <entry>Device node interface for ALSA Control</entry>
	    <entry>typically, /dev/snd/controlC?</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_ALSA_COMPRESS</constant></entry>
	    <entry>Device node interface for ALSA Compress</entry>
	    <entry>typically, /dev/snd/compr?</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_ALSA_RAWMIDI</constant></entry>
	    <entry>Device node interface for ALSA Raw MIDI</entry>
	    <entry>typically, /dev/snd/midi?</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_ALSA_HWDEP</constant></entry>
	    <entry>Device node interface for ALSA Hardware Dependent</entry>
	    <entry>typically, /dev/snd/hwC?D?</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_ALSA_SEQUENCER</constant></entry>
	    <entry>Device node interface for ALSA Sequencer</entry>
	    <entry>typically, /dev/snd/seq</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_INTF_T_ALSA_TIMER</constant></entry>
	    <entry>Device node interface for ALSA Timer</entry>
	    <entry>typically, /dev/snd/timer</entry>
	  </row>
	</tbody>
      </tgroup>
    </table>

    <table frame="none" pgwide="1" id="media-pad-flag">
      <title>Media pad flags</title>
      <tgroup cols="2">
	<colspec colname="c1"/>
	<colspec colname="c2"/>
	<tbody valign="top">
	  <row>
	    <entry><constant>MEDIA_PAD_FL_SINK</constant></entry>
	    <entry>Input pad, relative to the entity. Input pads sink data and
	    are targets of links.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_PAD_FL_SOURCE</constant></entry>
	    <entry>Output pad, relative to the entity. Output pads source data
	    and are origins of links.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_PAD_FL_MUST_CONNECT</constant></entry>
	    <entry>If this flag is set and the pad is linked to any other
	    pad, then at least one of those links must be enabled for the
	    entity to be able to stream. There could be temporary reasons
	    (e.g. device configuration dependent) for the pad to need
	    enabled links even when this flag isn't set; the absence of the
	    flag doesn't imply there is none.</entry>
	  </row>
	</tbody>
      </tgroup>
    </table>

    <para>One and only one of <constant>MEDIA_PAD_FL_SINK</constant> and
    <constant>MEDIA_PAD_FL_SOURCE</constant> must be set for every pad.</para>

    <table frame="none" pgwide="1" id="media-link-flag">
      <title>Media link flags</title>
      <tgroup cols="2">
	<colspec colname="c1"/>
	<colspec colname="c2"/>
	<tbody valign="top">
	  <row>
	    <entry><constant>MEDIA_LNK_FL_ENABLED</constant></entry>
	    <entry>The link is enabled and can be used to transfer media data.
	    When two or more links target a sink pad, only one of them can be
	    enabled at a time.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_LNK_FL_IMMUTABLE</constant></entry>
	    <entry>The link enabled state can't be modified at runtime. An
	    immutable link is always enabled.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_LNK_FL_DYNAMIC</constant></entry>
	    <entry>The link enabled state can be modified during streaming. This
	    flag is set by drivers and is read-only for applications.</entry>
	  </row>
	  <row>
	    <entry><constant>MEDIA_LNK_FL_LINK_TYPE</constant></entry>
	    <entry><para>This is a bitmask that defines the type of the link.
		   Currently, two types of links are supported:</para>
	    <para><constant>MEDIA_LNK_FL_DATA_LINK</constant>
	    if the link is between two pads</para>
	    <para><constant>MEDIA_LNK_FL_INTERFACE_LINK</constant>
	    if the link is between an interface and an entity</para></entry>
	  </row>
	</tbody>
      </tgroup>
    </table>

</section>