ASoC: Re-remove hand-rolled pr_debug() macros
The recent set of S3C64xx patches re-added a lot of uses of DBG() that
had previously been removed - revert this so the standard pr_debug()
macro is used.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
index 7457335..5f6aeec 100644
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_wm8753.c
@@ -40,14 +40,6 @@
#include "s3c24xx-pcm.h"
#include "s3c24xx-i2s.h"
-/* Debugging stuff */
-#define S3C24XX_SOC_NEO1973_WM8753_DEBUG 0
-#if S3C24XX_SOC_NEO1973_WM8753_DEBUG
-#define DBG(x...) printk(KERN_DEBUG "s3c24xx-soc-neo1973-wm8753: " x)
-#else
-#define DBG(x...)
-#endif
-
/* define the scenarios */
#define NEO_AUDIO_OFF 0
#define NEO_GSM_CALL_AUDIO_HANDSET 1
@@ -72,7 +64,7 @@
int ret = 0;
unsigned long iis_clkrate;
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
iis_clkrate = s3c24xx_i2s_get_clockrate();
@@ -158,7 +150,7 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
/* disable the PLL */
return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0);
@@ -181,7 +173,7 @@
int ret = 0;
unsigned long iis_clkrate;
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
iis_clkrate = s3c24xx_i2s_get_clockrate();
@@ -224,7 +216,7 @@
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
/* disable the PLL */
return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0);
@@ -246,7 +238,7 @@
static int set_scenario_endpoints(struct snd_soc_codec *codec, int scenario)
{
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
switch (neo1973_scenario) {
case NEO_AUDIO_OFF:
@@ -330,7 +322,7 @@
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
if (neo1973_scenario == ucontrol->value.integer.value[0])
return 0;
@@ -344,7 +336,7 @@
static void lm4857_write_regs(void)
{
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
if (i2c_master_send(i2c, lm4857_regs, 4) != 4)
printk(KERN_ERR "lm4857: i2c write failed\n");
@@ -357,7 +349,7 @@
int shift = (kcontrol->private_value >> 8) & 0x0F;
int mask = (kcontrol->private_value >> 16) & 0xFF;
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
ucontrol->value.integer.value[0] = (lm4857_regs[reg] >> shift) & mask;
return 0;
@@ -385,7 +377,7 @@
{
u8 value = lm4857_regs[LM4857_CTRL] & 0x0F;
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
if (value)
value -= 5;
@@ -399,7 +391,7 @@
{
u8 value = ucontrol->value.integer.value[0];
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
if (value)
value += 5;
@@ -508,7 +500,7 @@
{
int i, err;
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
/* set up NC codec pins */
snd_soc_dapm_nc_pin(codec, "LOUT2");
@@ -593,7 +585,7 @@
static int lm4857_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
i2c = client;
@@ -603,7 +595,7 @@
static int lm4857_i2c_remove(struct i2c_client *client)
{
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
i2c = NULL;
@@ -614,7 +606,7 @@
static int lm4857_suspend(struct i2c_client *dev, pm_message_t state)
{
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
dev_dbg(&dev->dev, "lm4857_suspend\n");
lm4857_state = lm4857_regs[LM4857_CTRL] & 0xf;
@@ -627,7 +619,7 @@
static int lm4857_resume(struct i2c_client *dev)
{
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
if (lm4857_state) {
lm4857_regs[LM4857_CTRL] |= (lm4857_state & 0x0f);
@@ -638,7 +630,7 @@
static void lm4857_shutdown(struct i2c_client *dev)
{
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
dev_dbg(&dev->dev, "lm4857_shutdown\n");
lm4857_regs[LM4857_CTRL] &= 0xf0;
@@ -669,7 +661,7 @@
{
int ret;
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
if (!machine_is_neo1973_gta01()) {
printk(KERN_INFO
@@ -700,7 +692,7 @@
static void __exit neo1973_exit(void)
{
- DBG("Entered %s\n", __func__);
+ pr_debug("Entered %s\n", __func__);
i2c_del_driver(&lm4857_i2c_driver);
platform_device_unregister(neo1973_snd_device);
