arch/arm64/boot/dts/arm/juno-base.dtsi - kernel/quantenna - Git at Google

 	/*
 	 *  Devices shared by all Juno boards
 	 */

 	memtimer: timer@2a810000 {
 		compatible = "arm,armv7-timer-mem";
 		reg = <0x0 0x2a810000 0x0 0x10000>;
 		clock-frequency = <50000000>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 		status = "disabled";
 		frame@2a830000 {
 			frame-number = <1>;
 			interrupts = <0 60 4>;
 			reg = <0x0 0x2a830000 0x0 0x10000>;
 		};
 	};

 	mailbox: mhu@2b1f0000 {
 		compatible = "arm,mhu", "arm,primecell";
 		reg = <0x0 0x2b1f0000 0x0 0x1000>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "mhu_lpri_rx",
 				  "mhu_hpri_rx";
 		#mbox-cells = <1>;
 		clocks = <&soc_refclk100mhz>;
 		clock-names = "apb_pclk";
 	};

 	gic: interrupt-controller@2c010000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		reg = <0x0 0x2c010000 0 0x1000>,
 		      <0x0 0x2c02f000 0 0x2000>,
 		      <0x0 0x2c04f000 0 0x2000>,
 		      <0x0 0x2c06f000 0 0x2000>;
 		#address-cells = <2>;
 		#interrupt-cells = <3>;
 		#size-cells = <2>;
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
 		ranges = <0 0 0 0x2c1c0000 0 0x40000>;
 		v2m_0: v2m@0 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0 0 0 0x1000>;
 		};
 	};

 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
 	};

 	sram: sram@2e000000 {
 		compatible = "arm,juno-sram-ns", "mmio-sram";
 		reg = <0x0 0x2e000000 0x0 0x8000>;

 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x0 0x2e000000 0x8000>;

 		cpu_scp_lpri: scp-shmem@0 {
 			compatible = "arm,juno-scp-shmem";
 			reg = <0x0 0x200>;
 		};

 		cpu_scp_hpri: scp-shmem@200 {
 			compatible = "arm,juno-scp-shmem";
 			reg = <0x200 0x200>;
 		};
 	};

 	pcie_ctlr: pcie-controller@40000000 {
 		compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
 		device_type = "pci";
 		reg = <0 0x40000000 0 0x10000000>;	/* ECAM config space */
 		bus-range = <0 255>;
 		linux,pci-domain = <0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		dma-coherent;
 		ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>,
 			 <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
 			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 7>;
 		interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>,
 				<0 0 0 2 &gic 0 0 0 137 4>,
 				<0 0 0 3 &gic 0 0 0 138 4>,
 				<0 0 0 4 &gic 0 0 0 139 4>;
 		msi-parent = <&v2m_0>;
 		status = "disabled";
 	};

 	scpi {
 		compatible = "arm,scpi";
 		mboxes = <&mailbox 1>;
 		shmem = <&cpu_scp_hpri>;

 		clocks {
 			compatible = "arm,scpi-clocks";

 			scpi_dvfs: scpi-dvfs {
 				compatible = "arm,scpi-dvfs-clocks";
 				#clock-cells = <1>;
 				clock-indices = <0>, <1>, <2>;
 				clock-output-names = "atlclk", "aplclk","gpuclk";
 			};
 			scpi_clk: scpi-clk {
 				compatible = "arm,scpi-variable-clocks";
 				#clock-cells = <1>;
 				clock-indices = <3>;
 				clock-output-names = "pxlclk";
 			};
 		};

 		scpi_sensors0: sensors {
 			compatible = "arm,scpi-sensors";
 			#thermal-sensor-cells = <1>;
 		};
 	};

 	/include/ "juno-clocks.dtsi"

 	dma@7ff00000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x0 0x7ff00000 0 0x1000>;
 		#dma-cells = <1>;
 		#dma-channels = <8>;
 		#dma-requests = <32>;
 		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&soc_faxiclk>;
 		clock-names = "apb_pclk";
 	};

 	hdlcd@7ff50000 {
 		compatible = "arm,hdlcd";
 		reg = <0 0x7ff50000 0 0x1000>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&scpi_clk 3>;
 		clock-names = "pxlclk";

 		port {
 			hdlcd1_output: hdlcd1-endpoint {
 				remote-endpoint = <&tda998x_1_input>;
 			};
 		};
 	};

 	hdlcd@7ff60000 {
 		compatible = "arm,hdlcd";
 		reg = <0 0x7ff60000 0 0x1000>;
 		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&scpi_clk 3>;
 		clock-names = "pxlclk";

 		port {
 			hdlcd0_output: hdlcd0-endpoint {
 				remote-endpoint = <&tda998x_0_input>;
 			};
 		};
 	};

 	soc_uart0: uart@7ff80000 {
 		compatible = "arm,pl011", "arm,primecell";
 		reg = <0x0 0x7ff80000 0x0 0x1000>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
 		clock-names = "uartclk", "apb_pclk";
 	};

 	i2c@7ffa0000 {
 		compatible = "snps,designware-i2c";
 		reg = <0x0 0x7ffa0000 0x0 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <400000>;
 		i2c-sda-hold-time-ns = <500>;
 		clocks = <&soc_smc50mhz>;

 		hdmi-transmitter@70 {
 			compatible = "nxp,tda998x";
 			reg = <0x70>;
 			port {
 				tda998x_0_input: tda998x-0-endpoint {
 					remote-endpoint = <&hdlcd0_output>;
 				};
 			};
 		};

 		hdmi-transmitter@71 {
 			compatible = "nxp,tda998x";
 			reg = <0x71>;
 			port {
 				tda998x_1_input: tda998x-1-endpoint {
 					remote-endpoint = <&hdlcd1_output>;
 				};
 			};
 		};
 	};

 	ohci@7ffb0000 {
 		compatible = "generic-ohci";
 		reg = <0x0 0x7ffb0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&soc_usb48mhz>;
 	};

 	ehci@7ffc0000 {
 		compatible = "generic-ehci";
 		reg = <0x0 0x7ffc0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&soc_usb48mhz>;
 	};

 	memory-controller@7ffd0000 {
 		compatible = "arm,pl354", "arm,primecell";
 		reg = <0 0x7ffd0000 0 0x1000>;
 		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&soc_smc50mhz>;
 		clock-names = "apb_pclk";
 	};

 	memory@80000000 {
 		device_type = "memory";
 		/* last 16MB of the first memory area is reserved for secure world use by firmware */
 		reg = <0x00000000 0x80000000 0x0 0x7f000000>,
 		      <0x00000008 0x80000000 0x1 0x80000000>;
 	};

 	smb@08000000 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges = <0 0 0 0x08000000 0x04000000>,
 			 <1 0 0 0x14000000 0x04000000>,
 			 <2 0 0 0x18000000 0x04000000>,
 			 <3 0 0 0x1c000000 0x04000000>,
 			 <4 0 0 0x0c000000 0x04000000>,
 			 <5 0 0 0x10000000 0x04000000>;

 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 15>;
 		interrupt-map = <0 0  0 &gic 0 0 0  68 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0  1 &gic 0 0 0  69 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0  2 &gic 0 0 0  70 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0  3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0  4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0  5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0  6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0  7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0  8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0  9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>;

 		/include/ "juno-motherboard.dtsi"
 	};

 	site2: tlx@60000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0 0x60000000 0x10000000>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0>;
 		interrupt-map = <0 0 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>;
 	};
	/*
	* Devices shared by all Juno boards
	*/

	memtimer: timer@2a810000 {
	compatible = "arm,armv7-timer-mem";
	reg = <0x0 0x2a810000 0x0 0x10000>;
	clock-frequency = <50000000>;
	#address-cells = <2>;
	#size-cells = <2>;
	ranges;
	status = "disabled";
	frame@2a830000 {
	frame-number = <1>;
	interrupts = <0 60 4>;
	reg = <0x0 0x2a830000 0x0 0x10000>;
	};
	};

	mailbox: mhu@2b1f0000 {
	compatible = "arm,mhu", "arm,primecell";
	reg = <0x0 0x2b1f0000 0x0 0x1000>;
	interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
	interrupt-names = "mhu_lpri_rx",
	"mhu_hpri_rx";
	#mbox-cells = <1>;
	clocks = <&soc_refclk100mhz>;
	clock-names = "apb_pclk";
	};

	gic: interrupt-controller@2c010000 {
	compatible = "arm,gic-400", "arm,cortex-a15-gic";
	reg = <0x0 0x2c010000 0 0x1000>,
	<0x0 0x2c02f000 0 0x2000>,
	<0x0 0x2c04f000 0 0x2000>,
	<0x0 0x2c06f000 0 0x2000>;
	#address-cells = <2>;
	#interrupt-cells = <3>;
	#size-cells = <2>;
	interrupt-controller;
	interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) \| IRQ_TYPE_LEVEL_HIGH)>;
	ranges = <0 0 0 0x2c1c0000 0 0x40000>;
	v2m_0: v2m@0 {
	compatible = "arm,gic-v2m-frame";
	msi-controller;
	reg = <0 0 0 0x1000>;
	};
	};

	timer {
	compatible = "arm,armv8-timer";
	interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) \| IRQ_TYPE_LEVEL_LOW)>,
	<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) \| IRQ_TYPE_LEVEL_LOW)>,
	<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) \| IRQ_TYPE_LEVEL_LOW)>,
	<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) \| IRQ_TYPE_LEVEL_LOW)>;
	};

	sram: sram@2e000000 {
	compatible = "arm,juno-sram-ns", "mmio-sram";
	reg = <0x0 0x2e000000 0x0 0x8000>;

	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0 0x0 0x2e000000 0x8000>;

	cpu_scp_lpri: scp-shmem@0 {
	compatible = "arm,juno-scp-shmem";
	reg = <0x0 0x200>;
	};

	cpu_scp_hpri: scp-shmem@200 {
	compatible = "arm,juno-scp-shmem";
	reg = <0x200 0x200>;
	};
	};

	pcie_ctlr: pcie-controller@40000000 {
	compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
	device_type = "pci";
	reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */
	bus-range = <0 255>;
	linux,pci-domain = <0>;
	#address-cells = <3>;
	#size-cells = <2>;
	dma-coherent;
	ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>,
	<0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
	<0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
	#interrupt-cells = <1>;
	interrupt-map-mask = <0 0 0 7>;
	interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>,
	<0 0 0 2 &gic 0 0 0 137 4>,
	<0 0 0 3 &gic 0 0 0 138 4>,
	<0 0 0 4 &gic 0 0 0 139 4>;
	msi-parent = <&v2m_0>;
	status = "disabled";
	};

	scpi {
	compatible = "arm,scpi";
	mboxes = <&mailbox 1>;
	shmem = <&cpu_scp_hpri>;

	clocks {
	compatible = "arm,scpi-clocks";

	scpi_dvfs: scpi-dvfs {
	compatible = "arm,scpi-dvfs-clocks";
	#clock-cells = <1>;
	clock-indices = <0>, <1>, <2>;
	clock-output-names = "atlclk", "aplclk","gpuclk";
	};
	scpi_clk: scpi-clk {
	compatible = "arm,scpi-variable-clocks";
	#clock-cells = <1>;
	clock-indices = <3>;
	clock-output-names = "pxlclk";
	};
	};

	scpi_sensors0: sensors {
	compatible = "arm,scpi-sensors";
	#thermal-sensor-cells = <1>;
	};
	};

	/include/ "juno-clocks.dtsi"

	dma@7ff00000 {
	compatible = "arm,pl330", "arm,primecell";
	reg = <0x0 0x7ff00000 0 0x1000>;
	#dma-cells = <1>;
	#dma-channels = <8>;
	#dma-requests = <32>;
	interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&soc_faxiclk>;
	clock-names = "apb_pclk";
	};

	hdlcd@7ff50000 {
	compatible = "arm,hdlcd";
	reg = <0 0x7ff50000 0 0x1000>;
	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&scpi_clk 3>;
	clock-names = "pxlclk";

	port {
	hdlcd1_output: hdlcd1-endpoint {
	remote-endpoint = <&tda998x_1_input>;
	};
	};
	};

	hdlcd@7ff60000 {
	compatible = "arm,hdlcd";
	reg = <0 0x7ff60000 0 0x1000>;
	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&scpi_clk 3>;
	clock-names = "pxlclk";

	port {
	hdlcd0_output: hdlcd0-endpoint {
	remote-endpoint = <&tda998x_0_input>;
	};
	};
	};

	soc_uart0: uart@7ff80000 {
	compatible = "arm,pl011", "arm,primecell";
	reg = <0x0 0x7ff80000 0x0 0x1000>;
	interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
	clock-names = "uartclk", "apb_pclk";
	};

	i2c@7ffa0000 {
	compatible = "snps,designware-i2c";
	reg = <0x0 0x7ffa0000 0x0 0x1000>;
	#address-cells = <1>;
	#size-cells = <0>;
	interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
	clock-frequency = <400000>;
	i2c-sda-hold-time-ns = <500>;
	clocks = <&soc_smc50mhz>;

	hdmi-transmitter@70 {
	compatible = "nxp,tda998x";
	reg = <0x70>;
	port {
	tda998x_0_input: tda998x-0-endpoint {
	remote-endpoint = <&hdlcd0_output>;
	};
	};
	};

	hdmi-transmitter@71 {
	compatible = "nxp,tda998x";
	reg = <0x71>;
	port {
	tda998x_1_input: tda998x-1-endpoint {
	remote-endpoint = <&hdlcd1_output>;
	};
	};
	};
	};

	ohci@7ffb0000 {
	compatible = "generic-ohci";
	reg = <0x0 0x7ffb0000 0x0 0x10000>;
	interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&soc_usb48mhz>;
	};

	ehci@7ffc0000 {
	compatible = "generic-ehci";
	reg = <0x0 0x7ffc0000 0x0 0x10000>;
	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&soc_usb48mhz>;
	};

	memory-controller@7ffd0000 {
	compatible = "arm,pl354", "arm,primecell";
	reg = <0 0x7ffd0000 0 0x1000>;
	interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&soc_smc50mhz>;
	clock-names = "apb_pclk";
	};

	memory@80000000 {
	device_type = "memory";
	/* last 16MB of the first memory area is reserved for secure world use by firmware */
	reg = <0x00000000 0x80000000 0x0 0x7f000000>,
	<0x00000008 0x80000000 0x1 0x80000000>;
	};

	smb@08000000 {
	compatible = "simple-bus";
	#address-cells = <2>;
	#size-cells = <1>;
	ranges = <0 0 0 0x08000000 0x04000000>,
	<1 0 0 0x14000000 0x04000000>,
	<2 0 0 0x18000000 0x04000000>,
	<3 0 0 0x1c000000 0x04000000>,
	<4 0 0 0x0c000000 0x04000000>,
	<5 0 0 0x10000000 0x04000000>;

	#interrupt-cells = <1>;
	interrupt-map-mask = <0 0 15>;
	interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>,
	<0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>,
	<0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>,
	<0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>,
	<0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>,
	<0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>,
	<0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>,
	<0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
	<0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
	<0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>,
	<0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>,
	<0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>,
	<0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>;

	/include/ "juno-motherboard.dtsi"
	};

	site2: tlx@60000000 {
	compatible = "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0 0 0x60000000 0x10000000>;
	#interrupt-cells = <1>;
	interrupt-map-mask = <0 0>;
	interrupt-map = <0 0 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>;
	};