blob: 44c906097530a76b6d1a52e267b44221557db0fe [file] [log] [blame]
/******************************************************************************
*
* Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* Modifications for inclusion into the Linux staging tree are
* Copyright(c) 2010 Larry Finger. All rights reserved.
*
* Contact information:
* WLAN FAE <wlanfae@realtek.com>
* Larry Finger <Larry.Finger@lwfinger.net>
*
******************************************************************************/
#ifndef __RTL8712_GP_BITDEF_H__
#define __RTL8712_GP_BITDEF_H__
/*GPIO_CTRL*/
#define _GPIO_MOD_MSK 0xFF000000
#define _GPIO_MOD_SHT 24
#define _GPIO_IO_SEL_MSK 0x00FF0000
#define _GPIO_IO_SEL_SHT 16
#define _GPIO_OUT_MSK 0x0000FF00
#define _GPIO_OUT_SHT 8
#define _GPIO_IN_MSK 0x000000FF
#define _GPIO_IN_SHT 0
/*SYS_PINMUX_CFG*/
#define _GPIOSEL_MSK 0x0003
#define _GPIOSEL_SHT 0
/*LED_CFG*/
#define _LED1SV BIT(7)
#define _LED1CM_MSK 0x0070
#define _LED1CM_SHT 4
#define _LED0SV BIT(3)
#define _LED0CM_MSK 0x0007
#define _LED0CM_SHT 0
/*PHY_REG*/
#define _HST_RDRDY_SHT 0
#define _HST_RDRDY_MSK 0xFF
#define _HST_RDRDY BIT(_HST_RDRDY_SHT)
#define _CPU_WTBUSY_SHT 1
#define _CPU_WTBUSY_MSK 0xFF
#define _CPU_WTBUSY BIT(_CPU_WTBUSY_SHT)
/* 11. General Purpose Registers (Offset: 0x02E0 - 0x02FF)*/
/* 8192S GPIO Config Setting (offset 0x2F1, 1 byte)*/
/*----------------------------------------------------------------------------*/
#define GPIOMUX_EN BIT(3) /* When this bit is set to "1",
* GPIO PINs will switch to MAC
* GPIO Function
*/
#define GPIOSEL_GPIO 0 /* UART or JTAG or pure GPIO*/
#define GPIOSEL_PHYDBG 1 /* PHYDBG*/
#define GPIOSEL_BT 2 /* BT_coex*/
#define GPIOSEL_WLANDBG 3 /* WLANDBG*/
#define GPIOSEL_GPIO_MASK (~(BIT(0)|BIT(1)))
/* HW Radio OFF switch (GPIO BIT) */
#define HAL_8192S_HW_GPIO_OFF_BIT BIT(3)
#define HAL_8192S_HW_GPIO_OFF_MASK 0xF7
#define HAL_8192S_HW_GPIO_WPS_BIT BIT(4)
#endif /*__RTL8712_GP_BITDEF_H__*/