blob: 970b8430eccf7d00327793674f7cbce19b70e209 [file] [log] [blame]
/*
* FB driver for the uPD161704 LCD Controller
*
* Copyright (C) 2014 Seong-Woo Kim
*
* Based on fb_ili9325.c by Noralf Tronnes
* Based on ili9325.c by Jeroen Domburg
* Init code from UTFT library by Henning Karlsen
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include "fbtft.h"
#define DRVNAME "fb_upd161704"
#define WIDTH 240
#define HEIGHT 320
#define BPP 16
static int init_display(struct fbtft_par *par)
{
par->fbtftops.reset(par);
if (par->gpio.cs != -1)
gpio_set_value(par->gpio.cs, 0); /* Activate chip */
/* Initialization sequence from Lib_UTFT */
/* register reset */
write_reg(par, 0x0003, 0x0001); /* Soft reset */
/* oscillator start */
write_reg(par, 0x003A, 0x0001); /*Oscillator 0: stop, 1: operation */
udelay(100);
/* y-setting */
write_reg(par, 0x0024, 0x007B); /* amplitude setting */
udelay(10);
write_reg(par, 0x0025, 0x003B); /* amplitude setting */
write_reg(par, 0x0026, 0x0034); /* amplitude setting */
udelay(10);
write_reg(par, 0x0027, 0x0004); /* amplitude setting */
write_reg(par, 0x0052, 0x0025); /* circuit setting 1 */
udelay(10);
write_reg(par, 0x0053, 0x0033); /* circuit setting 2 */
write_reg(par, 0x0061, 0x001C); /* adjustment V10 positive polarity */
udelay(10);
write_reg(par, 0x0062, 0x002C); /* adjustment V9 negative polarity */
write_reg(par, 0x0063, 0x0022); /* adjustment V34 positive polarity */
udelay(10);
write_reg(par, 0x0064, 0x0027); /* adjustment V31 negative polarity */
udelay(10);
write_reg(par, 0x0065, 0x0014); /* adjustment V61 negative polarity */
udelay(10);
write_reg(par, 0x0066, 0x0010); /* adjustment V61 negative polarity */
/* Basical clock for 1 line (BASECOUNT[7:0]) number specified */
write_reg(par, 0x002E, 0x002D);
/* Power supply setting */
write_reg(par, 0x0019, 0x0000); /* DC/DC output setting */
udelay(200);
write_reg(par, 0x001A, 0x1000); /* DC/DC frequency setting */
write_reg(par, 0x001B, 0x0023); /* DC/DC rising setting */
write_reg(par, 0x001C, 0x0C01); /* Regulator voltage setting */
write_reg(par, 0x001D, 0x0000); /* Regulator current setting */
write_reg(par, 0x001E, 0x0009); /* VCOM output setting */
write_reg(par, 0x001F, 0x0035); /* VCOM amplitude setting */
write_reg(par, 0x0020, 0x0015); /* VCOMM cencter setting */
write_reg(par, 0x0018, 0x1E7B); /* DC/DC operation setting */
/* windows setting */
write_reg(par, 0x0008, 0x0000); /* Minimum X address */
write_reg(par, 0x0009, 0x00EF); /* Maximum X address */
write_reg(par, 0x000a, 0x0000); /* Minimum Y address */
write_reg(par, 0x000b, 0x013F); /* Maximum Y address */
/* LCD display area setting */
write_reg(par, 0x0029, 0x0000); /* [LCDSIZE] X MIN. size set */
write_reg(par, 0x002A, 0x0000); /* [LCDSIZE] Y MIN. size set */
write_reg(par, 0x002B, 0x00EF); /* [LCDSIZE] X MAX. size set */
write_reg(par, 0x002C, 0x013F); /* [LCDSIZE] Y MAX. size set */
/* Gate scan setting */
write_reg(par, 0x0032, 0x0002);
/* n line inversion line number */
write_reg(par, 0x0033, 0x0000);
/* Line inversion/frame inversion/interlace setting */
write_reg(par, 0x0037, 0x0000);
/* Gate scan operation setting register */
write_reg(par, 0x003B, 0x0001);
/* Color mode */
/*GS = 0: 260-k color (64 gray scale), GS = 1: 8 color (2 gray scale) */
write_reg(par, 0x0004, 0x0000);
/* RAM control register */
write_reg(par, 0x0005, 0x0000); /*Window access 00:Normal, 10:Window */
/* Display setting register 2 */
write_reg(par, 0x0001, 0x0000);
/* display setting */
write_reg(par, 0x0000, 0x0000); /* display on */
return 0;
}
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
{
switch (par->info->var.rotate) {
/* R20h = Horizontal GRAM Start Address */
/* R21h = Vertical GRAM Start Address */
case 0:
write_reg(par, 0x0006, xs);
write_reg(par, 0x0007, ys);
break;
case 180:
write_reg(par, 0x0006, WIDTH - 1 - xs);
write_reg(par, 0x0007, HEIGHT - 1 - ys);
break;
case 270:
write_reg(par, 0x0006, WIDTH - 1 - ys);
write_reg(par, 0x0007, xs);
break;
case 90:
write_reg(par, 0x0006, ys);
write_reg(par, 0x0007, HEIGHT - 1 - xs);
break;
}
write_reg(par, 0x0e); /* Write Data to GRAM */
}
static int set_var(struct fbtft_par *par)
{
switch (par->info->var.rotate) {
/* AM: GRAM update direction */
case 0:
write_reg(par, 0x01, 0x0000);
write_reg(par, 0x05, 0x0000);
break;
case 180:
write_reg(par, 0x01, 0x00C0);
write_reg(par, 0x05, 0x0000);
break;
case 270:
write_reg(par, 0x01, 0x0080);
write_reg(par, 0x05, 0x0001);
break;
case 90:
write_reg(par, 0x01, 0x0040);
write_reg(par, 0x05, 0x0001);
break;
}
return 0;
}
static struct fbtft_display display = {
.regwidth = 16,
.width = WIDTH,
.height = HEIGHT,
.fbtftops = {
.init_display = init_display,
.set_addr_win = set_addr_win,
.set_var = set_var,
},
};
FBTFT_REGISTER_DRIVER(DRVNAME, "nec,upd161704", &display);
MODULE_ALIAS("spi:" DRVNAME);
MODULE_ALIAS("platform:" DRVNAME);
MODULE_ALIAS("spi:upd161704");
MODULE_ALIAS("platform:upd161704");
MODULE_DESCRIPTION("FB driver for the uPD161704 LCD Controller");
MODULE_AUTHOR("Seong-Woo Kim");
MODULE_LICENSE("GPL");