/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 ******************************************************************************/
#define _RTW_EFUSE_C_

#include <osdep_service.h>
#include <drv_types.h>

#include <rtw_efuse.h>
#include <rtl8723a_hal.h>
#include <usb_ops_linux.h>

#define REG_EFUSE_CTRL		0x0030
#define EFUSE_CTRL		REG_EFUSE_CTRL	/* E-Fuse Control */

#define VOLTAGE_V25		0x03
#define LDOE25_SHIFT		28

/*
 * When we want to enable write operation, we should change to
 * pwr on state. When we stop write, we should switch to 500k mode
 * and disable LDO 2.5V.
 */
static void Efuse_PowerSwitch(struct rtw_adapter *padapter,
			      u8 bWrite, u8 PwrState)
{
	u8 tempval;
	u16 tmpV16;

	if (PwrState == true) {
		rtl8723au_write8(padapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_ON);

		/*
		 * 1.2V Power: From VDDON with Power
		 * Cut(0x0000h[15]), default valid
		 */
		tmpV16 = rtl8723au_read16(padapter, REG_SYS_ISO_CTRL);
		if (!(tmpV16 & PWC_EV12V)) {
			tmpV16 |= PWC_EV12V;
			rtl8723au_write16(padapter, REG_SYS_ISO_CTRL, tmpV16);
		}
		/* Reset: 0x0000h[28], default valid */
		tmpV16 = rtl8723au_read16(padapter, REG_SYS_FUNC_EN);
		if (!(tmpV16 & FEN_ELDR)) {
			tmpV16 |= FEN_ELDR;
			rtl8723au_write16(padapter, REG_SYS_FUNC_EN, tmpV16);
		}

		/*
		 * Clock: Gated(0x0008h[5]) 8M(0x0008h[1])
		 * clock from ANA, default valid
		 */
		tmpV16 = rtl8723au_read16(padapter, REG_SYS_CLKR);
		if ((!(tmpV16 & LOADER_CLK_EN)) || (!(tmpV16 & ANA8M))) {
			tmpV16 |= (LOADER_CLK_EN | ANA8M);
			rtl8723au_write16(padapter, REG_SYS_CLKR, tmpV16);
		}

		if (bWrite == true) {
			/*  Enable LDO 2.5V before read/write action */
			tempval = rtl8723au_read8(padapter, EFUSE_TEST + 3);
			tempval &= 0x0F;
			tempval |= (VOLTAGE_V25 << 4);
			rtl8723au_write8(padapter, EFUSE_TEST + 3,
					 tempval | 0x80);
		}
	} else {
		rtl8723au_write8(padapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_OFF);

		if (bWrite == true) {
			/*  Disable LDO 2.5V after read/write action */
			tempval = rtl8723au_read8(padapter, EFUSE_TEST + 3);
			rtl8723au_write8(padapter, EFUSE_TEST + 3,
					 tempval & 0x7F);
		}
	}
}

u16 Efuse_GetCurrentSize23a(struct rtw_adapter *pAdapter, u8 efuseType)
{
	u16 ret = 0;

	if (efuseType == EFUSE_WIFI)
		ret = rtl8723a_EfuseGetCurrentSize_WiFi(pAdapter);
	else
		ret = rtl8723a_EfuseGetCurrentSize_BT(pAdapter);

	return ret;
}

/* Get current efuse area enabled word */
u8 Efuse_CalculateWordCnts23a(u8 word_en)
{
	return hweight8((~word_en) & 0xf);
}

/*
 * Description: Execute E-Fuse read byte operation.
 *
 * Assumptions: 1. Boot from E-Fuse and successfully auto-load.
 *              2. PASSIVE_LEVEL (USB interface)
 */
void ReadEFuseByte23a(struct rtw_adapter *Adapter, u16 _offset, u8 *pbuf)
{
	u32	value32;
	u8	readbyte;
	u16	retry;

	/* Write Address */
	rtl8723au_write8(Adapter, EFUSE_CTRL+1, (_offset & 0xff));
	readbyte = rtl8723au_read8(Adapter, EFUSE_CTRL+2);
	rtl8723au_write8(Adapter, EFUSE_CTRL+2,
			 ((_offset >> 8) & 0x03) | (readbyte & 0xfc));

	/* Write bit 32 0 */
	readbyte = rtl8723au_read8(Adapter, EFUSE_CTRL+3);
	rtl8723au_write8(Adapter, EFUSE_CTRL+3, readbyte & 0x7f);

	/* Check bit 32 read-ready */
	retry = 0;
	value32 = rtl8723au_read32(Adapter, EFUSE_CTRL);
	while (!((value32 >> 24) & 0x80) && retry < 10000) {
		value32 = rtl8723au_read32(Adapter, EFUSE_CTRL);
		retry++;
	}

	/*
	 * Added suggested delay. This fixes the problem that
	 * Efuse read error in high temperature condition.
	 * Designer says that there shall be some delay after
	 * ready bit is set, or the result will always stay
	 * on last data we read.
	 */
	udelay(50);
	value32 = rtl8723au_read32(Adapter, EFUSE_CTRL);

	*pbuf = (u8)(value32 & 0xff);
}

void EFUSE_GetEfuseDefinition23a(struct rtw_adapter *pAdapter, u8 efuseType,
				 u8 type, void *pOut)
{
	u8 *pu1Tmp;
	u16 *pu2Tmp;
	u8 *pMax_section;

	switch (type) {
	case TYPE_EFUSE_MAX_SECTION:
		pMax_section = pOut;

		if (efuseType == EFUSE_WIFI)
			*pMax_section = EFUSE_MAX_SECTION_8723A;
		else
			*pMax_section = EFUSE_BT_MAX_SECTION;
		break;

	case TYPE_EFUSE_REAL_CONTENT_LEN:
		pu2Tmp = pOut;

		if (efuseType == EFUSE_WIFI)
			*pu2Tmp = EFUSE_REAL_CONTENT_LEN_8723A;
		else
			*pu2Tmp = EFUSE_BT_REAL_CONTENT_LEN;
		break;

	case TYPE_AVAILABLE_EFUSE_BYTES_BANK:
		pu2Tmp = pOut;

		if (efuseType == EFUSE_WIFI)
			*pu2Tmp = (EFUSE_REAL_CONTENT_LEN_8723A -
				   EFUSE_OOB_PROTECT_BYTES);
		else
			*pu2Tmp = (EFUSE_BT_REAL_BANK_CONTENT_LEN -
				   EFUSE_PROTECT_BYTES_BANK);
		break;

	case TYPE_AVAILABLE_EFUSE_BYTES_TOTAL:
		pu2Tmp = pOut;

		if (efuseType == EFUSE_WIFI)
			*pu2Tmp = (EFUSE_REAL_CONTENT_LEN_8723A -
				   EFUSE_OOB_PROTECT_BYTES);
		else
			*pu2Tmp = (EFUSE_BT_REAL_CONTENT_LEN -
				   (EFUSE_PROTECT_BYTES_BANK * 3));
		break;

	case TYPE_EFUSE_MAP_LEN:
		pu2Tmp = pOut;

		if (efuseType == EFUSE_WIFI)
			*pu2Tmp = EFUSE_MAP_LEN_8723A;
		else
			*pu2Tmp = EFUSE_BT_MAP_LEN;
		break;

	case TYPE_EFUSE_PROTECT_BYTES_BANK:
		pu1Tmp = pOut;

		if (efuseType == EFUSE_WIFI)
			*pu1Tmp = EFUSE_OOB_PROTECT_BYTES;
		else
			*pu1Tmp = EFUSE_PROTECT_BYTES_BANK;
		break;

	case TYPE_EFUSE_CONTENT_LEN_BANK:
		pu2Tmp = pOut;

		if (efuseType == EFUSE_WIFI)
			*pu2Tmp = EFUSE_REAL_CONTENT_LEN_8723A;
		else
			*pu2Tmp = EFUSE_BT_REAL_BANK_CONTENT_LEN;
		break;

	default:
		pu1Tmp = pOut;
		*pu1Tmp = 0;
		break;
	}
}

/* Copy from WMAC for EFUSE read 1 byte. */
u8 EFUSE_Read1Byte23a(struct rtw_adapter *Adapter, u16 Address)
{
	u8	data;
	u8	Bytetemp = {0x00};
	u8	temp = {0x00};
	u32	k = 0;
	u16	contentLen = 0;

	EFUSE_GetEfuseDefinition23a(Adapter, EFUSE_WIFI,
				 TYPE_EFUSE_REAL_CONTENT_LEN,
				 (void *)&contentLen);

	if (Address < contentLen) { /* E-fuse 512Byte */
		/* Write E-fuse Register address bit0~7 */
		temp = Address & 0xFF;
		rtl8723au_write8(Adapter, EFUSE_CTRL+1, temp);
		Bytetemp = rtl8723au_read8(Adapter, EFUSE_CTRL+2);
		/* Write E-fuse Register address bit8~9 */
		temp = ((Address >> 8) & 0x03) | (Bytetemp & 0xFC);
		rtl8723au_write8(Adapter, EFUSE_CTRL+2, temp);

		/* Write 0x30[31]= 0 */
		Bytetemp = rtl8723au_read8(Adapter, EFUSE_CTRL+3);
		temp = Bytetemp & 0x7F;
		rtl8723au_write8(Adapter, EFUSE_CTRL+3, temp);

		/* Wait Write-ready (0x30[31]= 1) */
		Bytetemp = rtl8723au_read8(Adapter, EFUSE_CTRL+3);
		while (!(Bytetemp & 0x80)) {
			Bytetemp = rtl8723au_read8(Adapter, EFUSE_CTRL+3);
			k++;
			if (k == 1000) {
				k = 0;
				break;
			}
		}
		data = rtl8723au_read8(Adapter, EFUSE_CTRL);
		return data;
	}
	return 0xFF;
}

/* Read one byte from real Efuse. */
int efuse_OneByteRead23a(struct rtw_adapter *pAdapter, u16 addr, u8 *data)
{
	u8	tmpidx = 0;
	int	bResult;

	/*  -----------------e-fuse reg ctrl ---------------------------- */
	/* address */
	rtl8723au_write8(pAdapter, EFUSE_CTRL + 1, (u8)(addr & 0xff));
	rtl8723au_write8(pAdapter, EFUSE_CTRL + 2,
			 ((u8)((addr >> 8) & 0x03)) |
			 (rtl8723au_read8(pAdapter, EFUSE_CTRL + 2) & 0xFC));

	rtl8723au_write8(pAdapter, EFUSE_CTRL + 3, 0x72); /* read cmd */

	while (!(0x80 & rtl8723au_read8(pAdapter, EFUSE_CTRL + 3)) &&
	       (tmpidx < 100))
		tmpidx++;
	if (tmpidx < 100) {
		*data = rtl8723au_read8(pAdapter, EFUSE_CTRL);
		bResult = _SUCCESS;
	} else {
		*data = 0xff;
		bResult = _FAIL;
	}
	return bResult;
}

/* Write one byte to reald Efuse. */
int efuse_OneByteWrite23a(struct rtw_adapter *pAdapter, u16 addr, u8 data)
{
	u8	tmpidx = 0;
	int	bResult;

	/* return	0; */

	/*  -----------------e-fuse reg ctrl ------------------------- */
	/* address */
	rtl8723au_write8(pAdapter, EFUSE_CTRL + 1, (u8)(addr & 0xff));
	rtl8723au_write8(pAdapter, EFUSE_CTRL + 2,
			 (rtl8723au_read8(pAdapter, EFUSE_CTRL + 2) & 0xFC) |
			 (u8)((addr >> 8) & 0x03));
	rtl8723au_write8(pAdapter, EFUSE_CTRL, data); /* data */

	rtl8723au_write8(pAdapter, EFUSE_CTRL + 3, 0xF2); /* write cmd */

	while ((0x80 & rtl8723au_read8(pAdapter, EFUSE_CTRL + 3)) &&
	       (tmpidx < 100)) {
		tmpidx++;
	}

	if (tmpidx < 100)
		bResult = _SUCCESS;
	else
		bResult = _FAIL;

	return bResult;
}

/* Read allowed word in current efuse section data. */
void efuse_WordEnableDataRead23a(u8 word_en, u8 *sourdata, u8 *targetdata)
{
	if (!(word_en&BIT(0))) {
		targetdata[0] = sourdata[0];
		targetdata[1] = sourdata[1];
	}
	if (!(word_en&BIT(1))) {
		targetdata[2] = sourdata[2];
		targetdata[3] = sourdata[3];
	}
	if (!(word_en&BIT(2))) {
		targetdata[4] = sourdata[4];
		targetdata[5] = sourdata[5];
	}
	if (!(word_en&BIT(3))) {
		targetdata[6] = sourdata[6];
		targetdata[7] = sourdata[7];
	}
}

static int efuse_read8(struct rtw_adapter *padapter, u16 address, u8 *value)
{
	return efuse_OneByteRead23a(padapter, address, value);
}

static int efuse_write8(struct rtw_adapter *padapter, u16 address, u8 *value)
{
	return efuse_OneByteWrite23a(padapter, address, *value);
}

/* read/write raw efuse data */
int rtw_efuse_access23a(struct rtw_adapter *padapter, u8 bWrite, u16 start_addr,
			u16 cnts, u8 *data)
{
	int i = 0;
	u16 real_content_len = 0, max_available_size = 0;
	int res = _FAIL;
	int (*rw8)(struct rtw_adapter *, u16, u8*);

	EFUSE_GetEfuseDefinition23a(padapter, EFUSE_WIFI,
				 TYPE_EFUSE_REAL_CONTENT_LEN,
				 (void *)&real_content_len);
	EFUSE_GetEfuseDefinition23a(padapter, EFUSE_WIFI,
				 TYPE_AVAILABLE_EFUSE_BYTES_TOTAL,
				 (void *)&max_available_size);

	if (start_addr > real_content_len)
		return _FAIL;

	if (true == bWrite) {
		if ((start_addr + cnts) > max_available_size)
			return _FAIL;
		rw8 = &efuse_write8;
	} else
		rw8 = &efuse_read8;

	Efuse_PowerSwitch(padapter, bWrite, true);

	/* e-fuse one byte read/write */
	for (i = 0; i < cnts; i++) {
		if (start_addr >= real_content_len) {
			res = _FAIL;
			break;
		}

		res = rw8(padapter, start_addr++, data++);
		if (res == _FAIL)
			break;
	}

	Efuse_PowerSwitch(padapter, bWrite, false);

	return res;
}

u16 efuse_GetMaxSize23a(struct rtw_adapter *padapter)
{
	u16 max_size;

	EFUSE_GetEfuseDefinition23a(padapter, EFUSE_WIFI,
				 TYPE_AVAILABLE_EFUSE_BYTES_TOTAL,
				 (void *)&max_size);
	return max_size;
}

int rtw_efuse_map_read23a(struct rtw_adapter *padapter,
			  u16 addr, u16 cnts, u8 *data)
{
	u16 mapLen = 0;

	EFUSE_GetEfuseDefinition23a(padapter, EFUSE_WIFI,
				 TYPE_EFUSE_MAP_LEN, (void *)&mapLen);

	if ((addr + cnts) > mapLen)
		return _FAIL;

	Efuse_PowerSwitch(padapter, false, true);

	rtl8723a_readefuse(padapter, EFUSE_WIFI, addr, cnts, data);

	Efuse_PowerSwitch(padapter, false, false);

	return _SUCCESS;
}

int rtw_BT_efuse_map_read23a(struct rtw_adapter *padapter,
			     u16 addr, u16 cnts, u8 *data)
{
	u16 mapLen = 0;

	EFUSE_GetEfuseDefinition23a(padapter, EFUSE_BT,
				 TYPE_EFUSE_MAP_LEN, (void *)&mapLen);

	if ((addr + cnts) > mapLen)
		return _FAIL;

	Efuse_PowerSwitch(padapter, false, true);

	rtl8723a_readefuse(padapter, EFUSE_BT, addr, cnts, data);

	Efuse_PowerSwitch(padapter, false, false);

	return _SUCCESS;
}

/* Read All Efuse content */
static void Efuse_ReadAllMap(struct rtw_adapter *pAdapter, u8 efuseType,
			     u8 *Efuse)
{
	u16	mapLen = 0;

	Efuse_PowerSwitch(pAdapter, false, true);

	EFUSE_GetEfuseDefinition23a(pAdapter, efuseType, TYPE_EFUSE_MAP_LEN,
				 (void *)&mapLen);

	rtl8723a_readefuse(pAdapter, efuseType, 0, mapLen, Efuse);

	Efuse_PowerSwitch(pAdapter, false, false);
}

/*
 * Functions:	efuse_ShadowRead1Byte
 *		efuse_ShadowRead2Byte
 *		efuse_ShadowRead4Byte
 *
 * Read from efuse init map by one/two/four bytes
 */
static void efuse_ShadowRead1Byte(struct rtw_adapter *pAdapter, u16 Offset,
				  u8 *Value)
{
	struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter);

	*Value = pEEPROM->efuse_eeprom_data[Offset];
}

static void efuse_ShadowRead2Byte(struct rtw_adapter *pAdapter, u16 Offset,
				  u16 *Value)
{
	struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter);

	*Value = pEEPROM->efuse_eeprom_data[Offset];
	*Value |= pEEPROM->efuse_eeprom_data[Offset+1]<<8;
}

static void efuse_ShadowRead4Byte(struct rtw_adapter *pAdapter, u16 Offset,
				  u32 *Value)
{
	struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter);

	*Value = pEEPROM->efuse_eeprom_data[Offset];
	*Value |= pEEPROM->efuse_eeprom_data[Offset+1]<<8;
	*Value |= pEEPROM->efuse_eeprom_data[Offset+2]<<16;
	*Value |= pEEPROM->efuse_eeprom_data[Offset+3]<<24;
}

/* Transfer current EFUSE content to shadow init and modify map. */
void EFUSE_ShadowMapUpdate23a(struct rtw_adapter *pAdapter, u8 efuseType)
{
	struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(pAdapter);
	u16	mapLen = 0;

	EFUSE_GetEfuseDefinition23a(pAdapter, efuseType,
				 TYPE_EFUSE_MAP_LEN, (void *)&mapLen);

	if (pEEPROM->bautoload_fail_flag == true)
		memset(pEEPROM->efuse_eeprom_data, 0xFF, mapLen);
	else
		Efuse_ReadAllMap(pAdapter, efuseType,
				 pEEPROM->efuse_eeprom_data);
}

/* Read from efuse init map */
void EFUSE_ShadowRead23a(struct rtw_adapter *pAdapter, u8 Type,
			 u16 Offset, u32 *Value)
{
	if (Type == 1)
		efuse_ShadowRead1Byte(pAdapter, Offset, (u8 *)Value);
	else if (Type == 2)
		efuse_ShadowRead2Byte(pAdapter, Offset, (u16 *)Value);
	else if (Type == 4)
		efuse_ShadowRead4Byte(pAdapter, Offset, (u32 *)Value);
}