/*
 * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * vineetg: March 2009
 *  -Implemented task_pt_regs( )
 *
 * Amit Bhor, Sameer Dhavale, Ashwin Chaugule: Codito Technologies 2004
 */

#ifndef __ASM_ARC_PROCESSOR_H
#define __ASM_ARC_PROCESSOR_H

#ifndef __ASSEMBLY__

#include <asm/ptrace.h>
#include <common/topaz_config.h>
#include <asm/mem.h>

#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
/* These DPFP regs need to be saved/restored across ctx-sw */
struct arc_fpu {
	struct {
		unsigned int l, h;
	} aux_dpfp[2];
};
#endif

/* Arch specific stuff which needs to be saved per task.
 * However these items are not so important so as to earn a place in
 * struct thread_info
 */
struct thread_struct {
	unsigned long ksp;	/* kernel mode stack pointer */
	unsigned long callee_reg;	/* pointer to callee regs */
	unsigned long fault_address;	/* dbls as brkpt holder as well */
#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
	struct arc_fpu fpu;
#endif
};

#define INIT_THREAD  {                          \
	.ksp = sizeof(init_stack) + (unsigned long) init_stack, \
}

/* Forward declaration, a strange C thing */
struct task_struct;

#define task_pt_regs(p) \
	((struct pt_regs *)(THREAD_SIZE + (void *)task_stack_page(p)) - 1)

/* Free all resources held by a thread */
#define release_thread(thread) do { } while (0)

/*
 * A lot of busy-wait loops in SMP are based off of non-volatile data otherwise
 * get optimised away by gcc
 */
#ifndef CONFIG_EZNPS_MTM_EXT

#define cpu_relax()		barrier()
#define cpu_relax_lowlatency()	cpu_relax()

#else

#define cpu_relax()     \
	__asm__ __volatile__ (".word %0" : : "i"(CTOP_INST_SCHD_RW) : "memory")

#define cpu_relax_lowlatency()	barrier()

#endif

#define copy_segments(tsk, mm)      do { } while (0)
#define release_segments(mm)        do { } while (0)

#define KSTK_EIP(tsk)   (task_pt_regs(tsk)->ret)
#define KSTK_ESP(tsk)   (task_pt_regs(tsk)->sp)

/*
 * Where about of Task's sp, fp, blink when it was last seen in kernel mode.
 * Look in process.c for details of kernel stack layout
 */
#define TSK_K_ESP(tsk)		(tsk->thread.ksp)

#define TSK_K_REG(tsk, off)	(*((unsigned long *)(TSK_K_ESP(tsk) + \
					sizeof(struct callee_regs) + off)))

#define TSK_K_BLINK(tsk)	TSK_K_REG(tsk, 4)
#define TSK_K_FP(tsk)		TSK_K_REG(tsk, 0)

#define thread_saved_pc(tsk)	TSK_K_BLINK(tsk)

extern void start_thread(struct pt_regs * regs, unsigned long pc,
			 unsigned long usp);

extern unsigned int get_wchan(struct task_struct *p);

/*
 * Default implementation of macro that returns current
 * instruction pointer ("program counter").
 * Should the PC register be read instead ? This macro does not seem to
 * be used in many places so this wont be all that bad.
 */
#define current_text_addr() ({ __label__ _l; _l: &&_l; })

#endif /* !__ASSEMBLY__ */

/*
 * Default System Memory Map on ARC
 *
 * ---------------------------- (lower 2G, Translated) -------------------------
 * 0x0000_0000		0x5FFF_FFFF	(user vaddr: TASK_SIZE)
 * 0x6000_0000		0x6FFF_FFFF	(reserved gutter between U/K)
 * 0x7000_0000		0x7FFF_FFFF	(kvaddr: vmalloc/modules/pkmap..)
 *
 * PAGE_OFFSET ---------------- (Upper 2G, Untranslated) -----------------------
 * 0x8000_0000		0xBFFF_FFFF	(kernel direct mapped)
 * 0xC000_0000		0xFFFF_FFFF	(peripheral uncached space)
 * -----------------------------------------------------------------------------
 */

#define QTN_MEM_ARCH		1
#define QTN_MEM_FIXED_TASK_SIZE 1

#if QTN_MEM_ARCH
/* QTN defined memory arch */

#define VMALLOC_START		(PCI_REMAP_START - (CONFIG_ARC_KVADDR_SIZE << 20))
#define VMALLOC_SIZE		((CONFIG_ARC_KVADDR_SIZE << 20) - PGDIR_SIZE * 4)
#define VMALLOC_END		(VMALLOC_START + VMALLOC_SIZE)
#define VMALLOC_VMADDR(x)	((unsigned long)(x))
/* Most of the architectures seem to be keeping some kind of padding between
 * userspace TASK_SIZE and PAGE_OFFSET. i.e TASK_SIZE != PAGE_OFFSET.
 */

/* User address space:
 * On ARC700, CPU allows the entire lower half of 32 bit address space to be
 * translated. Thus potentially 2G (0:0x7FFF_FFFF) could be User vaddr space.
 * However we steal some addr space for kernel virtual memory and others and another
 * 16M is gutter between user/kernel spaces
 * Thus total User vaddr space is (0 - (VMALLOC_START - USER_KERNEL_GUTTER))
 */

#if QTN_MEM_FIXED_TASK_SIZE
/* Fixed TASK_SIZE */
#define TASK_SIZE		0x60000000
#define USER_KERNEL_GUTTER    (VMALLOC_START - TASK_SIZE)
#else
/* Maximize TASK_SIZE */
#define USER_KERNEL_GUTTER	0x02000000
#define TASK_SIZE	(VMALLOC_START - USER_KERNEL_GUTTER)
#endif

#define STACK_TOP	TASK_SIZE

#else
/*ARCH specific defines*/
#define TASK_SIZE	0x60000000

#define VMALLOC_START	(PAGE_OFFSET - (CONFIG_ARC_KVADDR_SIZE << 20))

/* 1 PGDIR_SIZE each for fixmap/pkmap, 2 PGDIR_SIZE gutter (see asm/highmem.h) */
#define VMALLOC_SIZE	((CONFIG_ARC_KVADDR_SIZE << 20) - PGDIR_SIZE * 4)

#define VMALLOC_END	(VMALLOC_START + VMALLOC_SIZE)

#define USER_KERNEL_GUTTER    (VMALLOC_START - TASK_SIZE)

#define STACK_TOP       TASK_SIZE
#endif

#define STACK_TOP_MAX   STACK_TOP

/* This decides where the kernel will search for a free chunk of vm
 * space during mmap's.
 */
#define TASK_UNMAPPED_BASE      (TASK_SIZE / 3)

#endif /* __ASM_ARC_PROCESSOR_H */