/* $(CROSS_COMPILE)cc -Wall -g -lpthread -o testusb testusb.c */

/*
 * Copyright (c) 2002 by David Brownell
 * 
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#define __user

#include <stdio.h>
#include <string.h>
#include <ftw.h>
#include <stdlib.h>
#include <pthread.h>
#include <unistd.h>
#include <errno.h>

#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>

#include <sys/ioctl.h>
#include <linux/usbdevice_fs.h>

/*-------------------------------------------------------------------------*/

#define	TEST_CASES	30

// FIXME make these public somewhere; usbdevfs.h?

struct usbtest_param {
	// inputs
	unsigned		test_num;	/* 0..(TEST_CASES-1) */
	unsigned		iterations;
	unsigned		length;
	unsigned		vary;
	unsigned		sglen;

	// outputs
	struct timeval		duration;
};
#define USBTEST_REQUEST	_IOWR('U', 100, struct usbtest_param)

/*-------------------------------------------------------------------------*/

/* #include <linux/usb_ch9.h> */

struct usb_device_descriptor {
	__u8  bLength;
	__u8  bDescriptorType;
	__u16 bcdUSB;
	__u8  bDeviceClass;
	__u8  bDeviceSubClass;
	__u8  bDeviceProtocol;
	__u8  bMaxPacketSize0;
	__u16 idVendor;
	__u16 idProduct;
	__u16 bcdDevice;
	__u8  iManufacturer;
	__u8  iProduct;
	__u8  iSerialNumber;
	__u8  bNumConfigurations;
} __attribute__ ((packed));

enum usb_device_speed {
	USB_SPEED_UNKNOWN = 0,			/* enumerating */
	USB_SPEED_LOW, USB_SPEED_FULL,		/* usb 1.1 */
	USB_SPEED_HIGH				/* usb 2.0 */
};

/*-------------------------------------------------------------------------*/

static char *speed (enum usb_device_speed s)
{
	switch (s) {
	case USB_SPEED_UNKNOWN:	return "unknown";
	case USB_SPEED_LOW:	return "low";
	case USB_SPEED_FULL:	return "full";
	case USB_SPEED_HIGH:	return "high";
	default:		return "??";
	}
}

struct testdev {
	struct testdev		*next;
	char			*name;
	pthread_t		thread;
	enum usb_device_speed	speed;
	unsigned		ifnum : 8;
	unsigned		forever : 1;
	int			test;

	struct usbtest_param	param;
};
static struct testdev		*testdevs;

static int is_testdev (struct usb_device_descriptor *dev)
{
	/* FX2 with (tweaked) bulksrc firmware */
	if (dev->idVendor == 0x0547 && dev->idProduct == 0x1002)
		return 1;

	/*----------------------------------------------------*/

	/* devices that start up using the EZ-USB default device and
	 * which we can use after loading simple firmware.  hotplug
	 * can fxload it, and then run this test driver.
	 *
	 * we return false positives in two cases:
	 * - the device has a "real" driver (maybe usb-serial) that
	 *   renumerates.  the device should vanish quickly.
	 * - the device doesn't have the test firmware installed.
	 */

	/* generic EZ-USB FX controller */
	if (dev->idVendor == 0x0547 && dev->idProduct == 0x2235)
		return 1;

	/* generic EZ-USB FX2 controller */
	if (dev->idVendor == 0x04b4 && dev->idProduct == 0x8613)
		return 1;

	/* CY3671 development board with EZ-USB FX */
	if (dev->idVendor == 0x0547 && dev->idProduct == 0x0080)
		return 1;

	/* Keyspan 19Qi uses an21xx (original EZ-USB) */
	if (dev->idVendor == 0x06cd && dev->idProduct == 0x010b)
		return 1;

	/*----------------------------------------------------*/

	/* "gadget zero", Linux-USB test software */
	if (dev->idVendor == 0x0525 && dev->idProduct == 0xa4a0)
		return 1;

	/* user mode subset of that */
	if (dev->idVendor == 0x0525 && dev->idProduct == 0xa4a4)
		return 1;

	/* iso version of usermode code */
	if (dev->idVendor == 0x0525 && dev->idProduct == 0xa4a3)
		return 1;

	/* some GPL'd test firmware uses these IDs */

	if (dev->idVendor == 0xfff0 && dev->idProduct == 0xfff0)
		return 1;

	/*----------------------------------------------------*/

	/* iBOT2 high speed webcam */
	if (dev->idVendor == 0x0b62 && dev->idProduct == 0x0059)
		return 1;

	return 0;
}

static int find_testdev (const char *name, const struct stat *sb, int flag)
{
	int				fd;
	struct usb_device_descriptor	dev;

	if (flag != FTW_F)
		return 0;
	/* ignore /proc/bus/usb/{devices,drivers} */
	if (strrchr (name, '/')[1] == 'd')
		return 0;

	if ((fd = open (name, O_RDONLY)) < 0) {
		perror ("can't open dev file r/o");
		return 0;
	}
	if (read (fd, &dev, sizeof dev) != sizeof dev)
		fputs ("short devfile read!\n", stderr);
	else if (is_testdev (&dev)) {
		struct testdev		*entry;

		if ((entry = calloc (1, sizeof *entry)) == 0) {
			fputs ("no mem!\n", stderr);
			goto done;
		}
		entry->name = strdup (name);
		if (!entry->name) {
			free (entry);
			goto done;
		}

		// FIXME better to look at each interface and ask if it's
		// bound to 'usbtest', rather than assume interface 0
		entry->ifnum = 0;

		// FIXME ask usbfs what speed; update USBDEVFS_CONNECTINFO
		// so it tells about high speed etc

		fprintf (stderr, "%s speed\t%s\n",
				speed (entry->speed), entry->name);

		entry->next = testdevs;
		testdevs = entry;
	}

done:
	close (fd);
	return 0;
}

static int
usbdev_ioctl (int fd, int ifno, unsigned request, void *param)
{
	struct usbdevfs_ioctl	wrapper;

	wrapper.ifno = ifno;
	wrapper.ioctl_code = request;
	wrapper.data = param;

	return ioctl (fd, USBDEVFS_IOCTL, &wrapper);
}

static void *handle_testdev (void *arg)
{
	struct testdev		*dev = arg;
	int			fd, i;
	int			status;

	if ((fd = open (dev->name, O_RDWR)) < 0) {
		perror ("can't open dev file r/w");
		return 0;
	}

restart:
	for (i = 0; i < TEST_CASES; i++) {
		if (dev->test != -1 && dev->test != i)
			continue;
		dev->param.test_num = i;

		status = usbdev_ioctl (fd, dev->ifnum,
				USBTEST_REQUEST, &dev->param);
		if (status < 0 && errno == EOPNOTSUPP)
			continue;

		/* FIXME need a "syslog it" option for background testing */

		/* NOTE: each thread emits complete lines; no fragments! */
		if (status < 0) {
			char	buf [80];
			int	err = errno;

			if (strerror_r (errno, buf, sizeof buf)) {
				snprintf (buf, sizeof buf, "error %d", err);
				errno = err;
			}
			printf ("%s test %d --> %d (%s)\n",
				dev->name, i, errno, buf);
		} else
			printf ("%s test %d, %4d.%.06d secs\n", dev->name, i,
				(int) dev->param.duration.tv_sec,
				(int) dev->param.duration.tv_usec);

		fflush (stdout);
	}
	if (dev->forever)
		goto restart;

	close (fd);
	return arg;
}

int main (int argc, char **argv)
{
	int			c;
	struct testdev		*entry;
	char			*device;
	int			all = 0, forever = 0, not = 0;
	int			test = -1 /* all */;
	struct usbtest_param	param;

	/* pick defaults that works with all speeds, without short packets.
	 *
	 * Best per-frame data rates:
	 *     high speed, bulk       512 * 13 * 8 = 53248
	 *                 interrupt 1024 *  3 * 8 = 24576
	 *     full speed, bulk/intr   64 * 19     =  1216
	 *                 interrupt   64 *  1     =    64
	 *      low speed, interrupt    8 *  1     =     8
	 */
	param.iterations = 1000;
	param.length = 512;
	param.vary = 512;
	param.sglen = 32;

	/* for easy use when hotplugging */
	device = getenv ("DEVICE");

	while ((c = getopt (argc, argv, "D:ac:g:hns:t:v:")) != EOF)
	switch (c) {
	case 'D':	/* device, if only one */
		device = optarg;
		continue;
	case 'a':	/* use all devices */
		device = 0;
		all = 1;
		continue;
	case 'c':	/* count iterations */
		param.iterations = atoi (optarg);
		if (param.iterations < 0)
			goto usage;
		continue;
	case 'g':	/* scatter/gather entries */
		param.sglen = atoi (optarg);
		if (param.sglen < 0)
			goto usage;
		continue;
	case 'l':	/* loop forever */
		forever = 1;
		continue;
	case 'n':	/* no test running! */
		not = 1;
		continue;
	case 's':	/* size of packet */
		param.length = atoi (optarg);
		if (param.length < 0)
			goto usage;
		continue;
	case 't':	/* run just one test */
		test = atoi (optarg);
		if (test < 0)
			goto usage;
		continue;
	case 'v':	/* vary packet size by ... */
		param.vary = atoi (optarg);
		if (param.vary < 0)
			goto usage;
		continue;
	case '?':
	case 'h':
	default:
usage:
		fprintf (stderr, "usage: %s [-an] [-D dev]\n"
			"\t[-c iterations]  [-t testnum]\n"
			"\t[-s packetsize] [-g sglen] [-v vary]\n",
			argv [0]);
		return 1;
	}
	if (optind != argc)
		goto usage;
	if (!all && !device) {
		fprintf (stderr, "must specify '-a' or '-D dev', "
			"or DEVICE=/proc/bus/usb/BBB/DDD in env\n");
		goto usage;
	}

	if ((c = open ("/proc/bus/usb/devices", O_RDONLY)) < 0) {
		fputs ("usbfs files are missing\n", stderr);
		return -1;
	}

	/* collect and list the test devices */
	if (ftw ("/proc/bus/usb", find_testdev, 3) != 0) {
		fputs ("ftw failed; is usbfs missing?\n", stderr);
		return -1;
	}

	/* quit, run single test, or create test threads */
	if (!testdevs && !device) {
		fputs ("no test devices recognized\n", stderr);
		return -1;
	}
	if (not)
		return 0;
	if (testdevs && testdevs->next == 0 && !device)
		device = testdevs->name;
	for (entry = testdevs; entry; entry = entry->next) {
		int	status;

		entry->param = param;
		entry->forever = forever;
		entry->test = test;

		if (device) {
			if (strcmp (entry->name, device))
				continue;
			return handle_testdev (entry) != entry;
		}
		status = pthread_create (&entry->thread, 0, handle_testdev, entry);
		if (status) {
			perror ("pthread_create");
			continue;
		}
	}
	if (device) {
		struct testdev		dev;

		/* kernel can recognize test devices we don't */
		fprintf (stderr, "%s: %s may see only control tests\n",
				argv [0], device);

		memset (&dev, 0, sizeof dev);
		dev.name = device;
		dev.param = param;
		dev.forever = forever;
		dev.test = test;
		return handle_testdev (&dev) != &dev;
	}

	/* wait for tests to complete */
	for (entry = testdevs; entry; entry = entry->next) {
		void	*retval;

		if (pthread_join (entry->thread, &retval))
			perror ("pthread_join");
		/* testing errors discarded! */
	}

	return 0;
}