| /* |
| * mach-davinci/nand.h |
| * |
| * Copyright © 2006 Texas Instruments. |
| * |
| * Ported to 2.6.23 Copyright © 2008 by |
| * Sander Huijsen <Shuijsen@optelecom-nkf.com> |
| * Troy Kisky <troy.kisky@boundarydevices.com> |
| * Dirk Behme <Dirk.Behme@gmail.com> |
| * |
| * -------------------------------------------------------------------------- |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #ifndef __ARCH_ARM_DAVINCI_NAND_H |
| #define __ARCH_ARM_DAVINCI_NAND_H |
| |
| #include <linux/mtd/nand.h> |
| |
| #define NRCSR_OFFSET 0x00 |
| #define AWCCR_OFFSET 0x04 |
| #define A1CR_OFFSET 0x10 |
| #define NANDFCR_OFFSET 0x60 |
| #define NANDFSR_OFFSET 0x64 |
| #define NANDF1ECC_OFFSET 0x70 |
| |
| /* 4-bit ECC syndrome registers */ |
| #define NAND_4BIT_ECC_LOAD_OFFSET 0xbc |
| #define NAND_4BIT_ECC1_OFFSET 0xc0 |
| #define NAND_4BIT_ECC2_OFFSET 0xc4 |
| #define NAND_4BIT_ECC3_OFFSET 0xc8 |
| #define NAND_4BIT_ECC4_OFFSET 0xcc |
| #define NAND_ERR_ADD1_OFFSET 0xd0 |
| #define NAND_ERR_ADD2_OFFSET 0xd4 |
| #define NAND_ERR_ERRVAL1_OFFSET 0xd8 |
| #define NAND_ERR_ERRVAL2_OFFSET 0xdc |
| |
| /* NOTE: boards don't need to use these address bits |
| * for ALE/CLE unless they support booting from NAND. |
| * They're used unless platform data overrides them. |
| */ |
| #define MASK_ALE 0x08 |
| #define MASK_CLE 0x10 |
| |
| struct davinci_nand_pdata { /* platform_data */ |
| uint32_t mask_ale; |
| uint32_t mask_cle; |
| |
| /* for packages using two chipselects */ |
| uint32_t mask_chipsel; |
| |
| /* board's default static partition info */ |
| struct mtd_partition *parts; |
| unsigned nr_parts; |
| |
| /* none == NAND_ECC_NONE (strongly *not* advised!!) |
| * soft == NAND_ECC_SOFT |
| * else == NAND_ECC_HW, according to ecc_bits |
| * |
| * All DaVinci-family chips support 1-bit hardware ECC. |
| * Newer ones also support 4-bit ECC, but are awkward |
| * using it with large page chips. |
| */ |
| nand_ecc_modes_t ecc_mode; |
| u8 ecc_bits; |
| |
| /* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */ |
| unsigned options; |
| }; |
| |
| #endif /* __ARCH_ARM_DAVINCI_NAND_H */ |
