| /* |
| * ipr.c -- driver for IBM Power Linux RAID adapters |
| * |
| * Written By: Brian King <brking@us.ibm.com>, IBM Corporation |
| * |
| * Copyright (C) 2003, 2004 IBM Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| /* |
| * Notes: |
| * |
| * This driver is used to control the following SCSI adapters: |
| * |
| * IBM iSeries: 5702, 5703, 2780, 5709, 570A, 570B |
| * |
| * IBM pSeries: PCI-X Dual Channel Ultra 320 SCSI RAID Adapter |
| * PCI-X Dual Channel Ultra 320 SCSI Adapter |
| * PCI-X Dual Channel Ultra 320 SCSI RAID Enablement Card |
| * Embedded SCSI adapter on p615 and p655 systems |
| * |
| * Supported Hardware Features: |
| * - Ultra 320 SCSI controller |
| * - PCI-X host interface |
| * - Embedded PowerPC RISC Processor and Hardware XOR DMA Engine |
| * - Non-Volatile Write Cache |
| * - Supports attachment of non-RAID disks, tape, and optical devices |
| * - RAID Levels 0, 5, 10 |
| * - Hot spare |
| * - Background Parity Checking |
| * - Background Data Scrubbing |
| * - Ability to increase the capacity of an existing RAID 5 disk array |
| * by adding disks |
| * |
| * Driver Features: |
| * - Tagged command queuing |
| * - Adapter microcode download |
| * - PCI hot plug |
| * - SCSI device hot plug |
| * |
| */ |
| |
| #include <linux/fs.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/errno.h> |
| #include <linux/kernel.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/wait.h> |
| #include <linux/spinlock.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/blkdev.h> |
| #include <linux/firmware.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/libata.h> |
| #include <linux/hdreg.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/processor.h> |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_tcq.h> |
| #include <scsi/scsi_eh.h> |
| #include <scsi/scsi_cmnd.h> |
| #include "ipr.h" |
| |
| /* |
| * Global Data |
| */ |
| static LIST_HEAD(ipr_ioa_head); |
| static unsigned int ipr_log_level = IPR_DEFAULT_LOG_LEVEL; |
| static unsigned int ipr_max_speed = 1; |
| static int ipr_testmode = 0; |
| static unsigned int ipr_fastfail = 0; |
| static unsigned int ipr_transop_timeout = 0; |
| static unsigned int ipr_enable_cache = 1; |
| static unsigned int ipr_debug = 0; |
| static unsigned int ipr_dual_ioa_raid = 1; |
| static DEFINE_SPINLOCK(ipr_driver_lock); |
| |
| /* This table describes the differences between DMA controller chips */ |
| static const struct ipr_chip_cfg_t ipr_chip_cfg[] = { |
| { /* Gemstone, Citrine, Obsidian, and Obsidian-E */ |
| .mailbox = 0x0042C, |
| .cache_line_size = 0x20, |
| { |
| .set_interrupt_mask_reg = 0x0022C, |
| .clr_interrupt_mask_reg = 0x00230, |
| .sense_interrupt_mask_reg = 0x0022C, |
| .clr_interrupt_reg = 0x00228, |
| .sense_interrupt_reg = 0x00224, |
| .ioarrin_reg = 0x00404, |
| .sense_uproc_interrupt_reg = 0x00214, |
| .set_uproc_interrupt_reg = 0x00214, |
| .clr_uproc_interrupt_reg = 0x00218 |
| } |
| }, |
| { /* Snipe and Scamp */ |
| .mailbox = 0x0052C, |
| .cache_line_size = 0x20, |
| { |
| .set_interrupt_mask_reg = 0x00288, |
| .clr_interrupt_mask_reg = 0x0028C, |
| .sense_interrupt_mask_reg = 0x00288, |
| .clr_interrupt_reg = 0x00284, |
| .sense_interrupt_reg = 0x00280, |
| .ioarrin_reg = 0x00504, |
| .sense_uproc_interrupt_reg = 0x00290, |
| .set_uproc_interrupt_reg = 0x00290, |
| .clr_uproc_interrupt_reg = 0x00294 |
| } |
| }, |
| }; |
| |
| static const struct ipr_chip_t ipr_chip[] = { |
| { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, IPR_USE_LSI, &ipr_chip_cfg[0] }, |
| { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, IPR_USE_LSI, &ipr_chip_cfg[0] }, |
| { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN, IPR_USE_LSI, &ipr_chip_cfg[0] }, |
| { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, IPR_USE_LSI, &ipr_chip_cfg[0] }, |
| { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E, IPR_USE_MSI, &ipr_chip_cfg[0] }, |
| { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, IPR_USE_LSI, &ipr_chip_cfg[1] }, |
| { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, IPR_USE_LSI, &ipr_chip_cfg[1] } |
| }; |
| |
| static int ipr_max_bus_speeds [] = { |
| IPR_80MBs_SCSI_RATE, IPR_U160_SCSI_RATE, IPR_U320_SCSI_RATE |
| }; |
| |
| MODULE_AUTHOR("Brian King <brking@us.ibm.com>"); |
| MODULE_DESCRIPTION("IBM Power RAID SCSI Adapter Driver"); |
| module_param_named(max_speed, ipr_max_speed, uint, 0); |
| MODULE_PARM_DESC(max_speed, "Maximum bus speed (0-2). Default: 1=U160. Speeds: 0=80 MB/s, 1=U160, 2=U320"); |
| module_param_named(log_level, ipr_log_level, uint, 0); |
| MODULE_PARM_DESC(log_level, "Set to 0 - 4 for increasing verbosity of device driver"); |
| module_param_named(testmode, ipr_testmode, int, 0); |
| MODULE_PARM_DESC(testmode, "DANGEROUS!!! Allows unsupported configurations"); |
| module_param_named(fastfail, ipr_fastfail, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(fastfail, "Reduce timeouts and retries"); |
| module_param_named(transop_timeout, ipr_transop_timeout, int, 0); |
| MODULE_PARM_DESC(transop_timeout, "Time in seconds to wait for adapter to come operational (default: 300)"); |
| module_param_named(enable_cache, ipr_enable_cache, int, 0); |
| MODULE_PARM_DESC(enable_cache, "Enable adapter's non-volatile write cache (default: 1)"); |
| module_param_named(debug, ipr_debug, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(debug, "Enable device driver debugging logging. Set to 1 to enable. (default: 0)"); |
| module_param_named(dual_ioa_raid, ipr_dual_ioa_raid, int, 0); |
| MODULE_PARM_DESC(dual_ioa_raid, "Enable dual adapter RAID support. Set to 1 to enable. (default: 1)"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(IPR_DRIVER_VERSION); |
| |
| /* A constant array of IOASCs/URCs/Error Messages */ |
| static const |
| struct ipr_error_table_t ipr_error_table[] = { |
| {0x00000000, 1, IPR_DEFAULT_LOG_LEVEL, |
| "8155: An unknown error was received"}, |
| {0x00330000, 0, 0, |
| "Soft underlength error"}, |
| {0x005A0000, 0, 0, |
| "Command to be cancelled not found"}, |
| {0x00808000, 0, 0, |
| "Qualified success"}, |
| {0x01080000, 1, IPR_DEFAULT_LOG_LEVEL, |
| "FFFE: Soft device bus error recovered by the IOA"}, |
| {0x01088100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "4101: Soft device bus fabric error"}, |
| {0x01170600, 0, IPR_DEFAULT_LOG_LEVEL, |
| "FFF9: Device sector reassign successful"}, |
| {0x01170900, 0, IPR_DEFAULT_LOG_LEVEL, |
| "FFF7: Media error recovered by device rewrite procedures"}, |
| {0x01180200, 0, IPR_DEFAULT_LOG_LEVEL, |
| "7001: IOA sector reassignment successful"}, |
| {0x01180500, 0, IPR_DEFAULT_LOG_LEVEL, |
| "FFF9: Soft media error. Sector reassignment recommended"}, |
| {0x01180600, 0, IPR_DEFAULT_LOG_LEVEL, |
| "FFF7: Media error recovered by IOA rewrite procedures"}, |
| {0x01418000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "FF3D: Soft PCI bus error recovered by the IOA"}, |
| {0x01440000, 1, IPR_DEFAULT_LOG_LEVEL, |
| "FFF6: Device hardware error recovered by the IOA"}, |
| {0x01448100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "FFF6: Device hardware error recovered by the device"}, |
| {0x01448200, 1, IPR_DEFAULT_LOG_LEVEL, |
| "FF3D: Soft IOA error recovered by the IOA"}, |
| {0x01448300, 0, IPR_DEFAULT_LOG_LEVEL, |
| "FFFA: Undefined device response recovered by the IOA"}, |
| {0x014A0000, 1, IPR_DEFAULT_LOG_LEVEL, |
| "FFF6: Device bus error, message or command phase"}, |
| {0x014A8000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "FFFE: Task Management Function failed"}, |
| {0x015D0000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "FFF6: Failure prediction threshold exceeded"}, |
| {0x015D9200, 0, IPR_DEFAULT_LOG_LEVEL, |
| "8009: Impending cache battery pack failure"}, |
| {0x02040400, 0, 0, |
| "34FF: Disk device format in progress"}, |
| {0x02048000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9070: IOA requested reset"}, |
| {0x023F0000, 0, 0, |
| "Synchronization required"}, |
| {0x024E0000, 0, 0, |
| "No ready, IOA shutdown"}, |
| {0x025A0000, 0, 0, |
| "Not ready, IOA has been shutdown"}, |
| {0x02670100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "3020: Storage subsystem configuration error"}, |
| {0x03110B00, 0, 0, |
| "FFF5: Medium error, data unreadable, recommend reassign"}, |
| {0x03110C00, 0, 0, |
| "7000: Medium error, data unreadable, do not reassign"}, |
| {0x03310000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "FFF3: Disk media format bad"}, |
| {0x04050000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "3002: Addressed device failed to respond to selection"}, |
| {0x04080000, 1, IPR_DEFAULT_LOG_LEVEL, |
| "3100: Device bus error"}, |
| {0x04080100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "3109: IOA timed out a device command"}, |
| {0x04088000, 0, 0, |
| "3120: SCSI bus is not operational"}, |
| {0x04088100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "4100: Hard device bus fabric error"}, |
| {0x04118000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9000: IOA reserved area data check"}, |
| {0x04118100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9001: IOA reserved area invalid data pattern"}, |
| {0x04118200, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9002: IOA reserved area LRC error"}, |
| {0x04320000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "102E: Out of alternate sectors for disk storage"}, |
| {0x04330000, 1, IPR_DEFAULT_LOG_LEVEL, |
| "FFF4: Data transfer underlength error"}, |
| {0x04338000, 1, IPR_DEFAULT_LOG_LEVEL, |
| "FFF4: Data transfer overlength error"}, |
| {0x043E0100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "3400: Logical unit failure"}, |
| {0x04408500, 0, IPR_DEFAULT_LOG_LEVEL, |
| "FFF4: Device microcode is corrupt"}, |
| {0x04418000, 1, IPR_DEFAULT_LOG_LEVEL, |
| "8150: PCI bus error"}, |
| {0x04430000, 1, 0, |
| "Unsupported device bus message received"}, |
| {0x04440000, 1, IPR_DEFAULT_LOG_LEVEL, |
| "FFF4: Disk device problem"}, |
| {0x04448200, 1, IPR_DEFAULT_LOG_LEVEL, |
| "8150: Permanent IOA failure"}, |
| {0x04448300, 0, IPR_DEFAULT_LOG_LEVEL, |
| "3010: Disk device returned wrong response to IOA"}, |
| {0x04448400, 0, IPR_DEFAULT_LOG_LEVEL, |
| "8151: IOA microcode error"}, |
| {0x04448500, 0, 0, |
| "Device bus status error"}, |
| {0x04448600, 0, IPR_DEFAULT_LOG_LEVEL, |
| "8157: IOA error requiring IOA reset to recover"}, |
| {0x04448700, 0, 0, |
| "ATA device status error"}, |
| {0x04490000, 0, 0, |
| "Message reject received from the device"}, |
| {0x04449200, 0, IPR_DEFAULT_LOG_LEVEL, |
| "8008: A permanent cache battery pack failure occurred"}, |
| {0x0444A000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9090: Disk unit has been modified after the last known status"}, |
| {0x0444A200, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9081: IOA detected device error"}, |
| {0x0444A300, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9082: IOA detected device error"}, |
| {0x044A0000, 1, IPR_DEFAULT_LOG_LEVEL, |
| "3110: Device bus error, message or command phase"}, |
| {0x044A8000, 1, IPR_DEFAULT_LOG_LEVEL, |
| "3110: SAS Command / Task Management Function failed"}, |
| {0x04670400, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9091: Incorrect hardware configuration change has been detected"}, |
| {0x04678000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9073: Invalid multi-adapter configuration"}, |
| {0x04678100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "4010: Incorrect connection between cascaded expanders"}, |
| {0x04678200, 0, IPR_DEFAULT_LOG_LEVEL, |
| "4020: Connections exceed IOA design limits"}, |
| {0x04678300, 0, IPR_DEFAULT_LOG_LEVEL, |
| "4030: Incorrect multipath connection"}, |
| {0x04679000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "4110: Unsupported enclosure function"}, |
| {0x046E0000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "FFF4: Command to logical unit failed"}, |
| {0x05240000, 1, 0, |
| "Illegal request, invalid request type or request packet"}, |
| {0x05250000, 0, 0, |
| "Illegal request, invalid resource handle"}, |
| {0x05258000, 0, 0, |
| "Illegal request, commands not allowed to this device"}, |
| {0x05258100, 0, 0, |
| "Illegal request, command not allowed to a secondary adapter"}, |
| {0x05260000, 0, 0, |
| "Illegal request, invalid field in parameter list"}, |
| {0x05260100, 0, 0, |
| "Illegal request, parameter not supported"}, |
| {0x05260200, 0, 0, |
| "Illegal request, parameter value invalid"}, |
| {0x052C0000, 0, 0, |
| "Illegal request, command sequence error"}, |
| {0x052C8000, 1, 0, |
| "Illegal request, dual adapter support not enabled"}, |
| {0x06040500, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9031: Array protection temporarily suspended, protection resuming"}, |
| {0x06040600, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9040: Array protection temporarily suspended, protection resuming"}, |
| {0x06288000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "3140: Device bus not ready to ready transition"}, |
| {0x06290000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "FFFB: SCSI bus was reset"}, |
| {0x06290500, 0, 0, |
| "FFFE: SCSI bus transition to single ended"}, |
| {0x06290600, 0, 0, |
| "FFFE: SCSI bus transition to LVD"}, |
| {0x06298000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "FFFB: SCSI bus was reset by another initiator"}, |
| {0x063F0300, 0, IPR_DEFAULT_LOG_LEVEL, |
| "3029: A device replacement has occurred"}, |
| {0x064C8000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9051: IOA cache data exists for a missing or failed device"}, |
| {0x064C8100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9055: Auxiliary cache IOA contains cache data needed by the primary IOA"}, |
| {0x06670100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9025: Disk unit is not supported at its physical location"}, |
| {0x06670600, 0, IPR_DEFAULT_LOG_LEVEL, |
| "3020: IOA detected a SCSI bus configuration error"}, |
| {0x06678000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "3150: SCSI bus configuration error"}, |
| {0x06678100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9074: Asymmetric advanced function disk configuration"}, |
| {0x06678300, 0, IPR_DEFAULT_LOG_LEVEL, |
| "4040: Incomplete multipath connection between IOA and enclosure"}, |
| {0x06678400, 0, IPR_DEFAULT_LOG_LEVEL, |
| "4041: Incomplete multipath connection between enclosure and device"}, |
| {0x06678500, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9075: Incomplete multipath connection between IOA and remote IOA"}, |
| {0x06678600, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9076: Configuration error, missing remote IOA"}, |
| {0x06679100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "4050: Enclosure does not support a required multipath function"}, |
| {0x06690000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "4070: Logically bad block written on device"}, |
| {0x06690200, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9041: Array protection temporarily suspended"}, |
| {0x06698200, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9042: Corrupt array parity detected on specified device"}, |
| {0x066B0200, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9030: Array no longer protected due to missing or failed disk unit"}, |
| {0x066B8000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9071: Link operational transition"}, |
| {0x066B8100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9072: Link not operational transition"}, |
| {0x066B8200, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9032: Array exposed but still protected"}, |
| {0x066B8300, 0, IPR_DEFAULT_LOG_LEVEL + 1, |
| "70DD: Device forced failed by disrupt device command"}, |
| {0x066B9100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "4061: Multipath redundancy level got better"}, |
| {0x066B9200, 0, IPR_DEFAULT_LOG_LEVEL, |
| "4060: Multipath redundancy level got worse"}, |
| {0x07270000, 0, 0, |
| "Failure due to other device"}, |
| {0x07278000, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9008: IOA does not support functions expected by devices"}, |
| {0x07278100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9010: Cache data associated with attached devices cannot be found"}, |
| {0x07278200, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9011: Cache data belongs to devices other than those attached"}, |
| {0x07278400, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9020: Array missing 2 or more devices with only 1 device present"}, |
| {0x07278500, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9021: Array missing 2 or more devices with 2 or more devices present"}, |
| {0x07278600, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9022: Exposed array is missing a required device"}, |
| {0x07278700, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9023: Array member(s) not at required physical locations"}, |
| {0x07278800, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9024: Array not functional due to present hardware configuration"}, |
| {0x07278900, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9026: Array not functional due to present hardware configuration"}, |
| {0x07278A00, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9027: Array is missing a device and parity is out of sync"}, |
| {0x07278B00, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9028: Maximum number of arrays already exist"}, |
| {0x07278C00, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9050: Required cache data cannot be located for a disk unit"}, |
| {0x07278D00, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9052: Cache data exists for a device that has been modified"}, |
| {0x07278F00, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9054: IOA resources not available due to previous problems"}, |
| {0x07279100, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9092: Disk unit requires initialization before use"}, |
| {0x07279200, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9029: Incorrect hardware configuration change has been detected"}, |
| {0x07279600, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9060: One or more disk pairs are missing from an array"}, |
| {0x07279700, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9061: One or more disks are missing from an array"}, |
| {0x07279800, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9062: One or more disks are missing from an array"}, |
| {0x07279900, 0, IPR_DEFAULT_LOG_LEVEL, |
| "9063: Maximum number of functional arrays has been exceeded"}, |
| {0x0B260000, 0, 0, |
| "Aborted command, invalid descriptor"}, |
| {0x0B5A0000, 0, 0, |
| "Command terminated by host"} |
| }; |
| |
| static const struct ipr_ses_table_entry ipr_ses_table[] = { |
| { "2104-DL1 ", "XXXXXXXXXXXXXXXX", 80 }, |
| { "2104-TL1 ", "XXXXXXXXXXXXXXXX", 80 }, |
| { "HSBP07M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 7 slot */ |
| { "HSBP05M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 5 slot */ |
| { "HSBP05M S U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Bowtie */ |
| { "HSBP06E ASU2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* MartinFenning */ |
| { "2104-DU3 ", "XXXXXXXXXXXXXXXX", 160 }, |
| { "2104-TU3 ", "XXXXXXXXXXXXXXXX", 160 }, |
| { "HSBP04C RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 }, |
| { "HSBP06E RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 }, |
| { "St V1S2 ", "XXXXXXXXXXXXXXXX", 160 }, |
| { "HSBPD4M PU3SCSI", "XXXXXXX*XXXXXXXX", 160 }, |
| { "VSBPD1H U3SCSI", "XXXXXXX*XXXXXXXX", 160 } |
| }; |
| |
| /* |
| * Function Prototypes |
| */ |
| static int ipr_reset_alert(struct ipr_cmnd *); |
| static void ipr_process_ccn(struct ipr_cmnd *); |
| static void ipr_process_error(struct ipr_cmnd *); |
| static void ipr_reset_ioa_job(struct ipr_cmnd *); |
| static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg *, |
| enum ipr_shutdown_type); |
| |
| #ifdef CONFIG_SCSI_IPR_TRACE |
| /** |
| * ipr_trc_hook - Add a trace entry to the driver trace |
| * @ipr_cmd: ipr command struct |
| * @type: trace type |
| * @add_data: additional data |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_trc_hook(struct ipr_cmnd *ipr_cmd, |
| u8 type, u32 add_data) |
| { |
| struct ipr_trace_entry *trace_entry; |
| struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; |
| |
| trace_entry = &ioa_cfg->trace[ioa_cfg->trace_index++]; |
| trace_entry->time = jiffies; |
| trace_entry->op_code = ipr_cmd->ioarcb.cmd_pkt.cdb[0]; |
| trace_entry->type = type; |
| trace_entry->ata_op_code = ipr_cmd->ioarcb.add_data.u.regs.command; |
| trace_entry->cmd_index = ipr_cmd->cmd_index & 0xff; |
| trace_entry->res_handle = ipr_cmd->ioarcb.res_handle; |
| trace_entry->u.add_data = add_data; |
| } |
| #else |
| #define ipr_trc_hook(ipr_cmd, type, add_data) do { } while(0) |
| #endif |
| |
| /** |
| * ipr_reinit_ipr_cmnd - Re-initialize an IPR Cmnd block for reuse |
| * @ipr_cmd: ipr command struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_reinit_ipr_cmnd(struct ipr_cmnd *ipr_cmd) |
| { |
| struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; |
| struct ipr_ioasa *ioasa = &ipr_cmd->ioasa; |
| dma_addr_t dma_addr = be32_to_cpu(ioarcb->ioarcb_host_pci_addr); |
| |
| memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt)); |
| ioarcb->write_data_transfer_length = 0; |
| ioarcb->read_data_transfer_length = 0; |
| ioarcb->write_ioadl_len = 0; |
| ioarcb->read_ioadl_len = 0; |
| ioarcb->write_ioadl_addr = |
| cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioadl)); |
| ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr; |
| ioasa->ioasc = 0; |
| ioasa->residual_data_len = 0; |
| ioasa->u.gata.status = 0; |
| |
| ipr_cmd->scsi_cmd = NULL; |
| ipr_cmd->qc = NULL; |
| ipr_cmd->sense_buffer[0] = 0; |
| ipr_cmd->dma_use_sg = 0; |
| } |
| |
| /** |
| * ipr_init_ipr_cmnd - Initialize an IPR Cmnd block |
| * @ipr_cmd: ipr command struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_init_ipr_cmnd(struct ipr_cmnd *ipr_cmd) |
| { |
| ipr_reinit_ipr_cmnd(ipr_cmd); |
| ipr_cmd->u.scratch = 0; |
| ipr_cmd->sibling = NULL; |
| init_timer(&ipr_cmd->timer); |
| } |
| |
| /** |
| * ipr_get_free_ipr_cmnd - Get a free IPR Cmnd block |
| * @ioa_cfg: ioa config struct |
| * |
| * Return value: |
| * pointer to ipr command struct |
| **/ |
| static |
| struct ipr_cmnd *ipr_get_free_ipr_cmnd(struct ipr_ioa_cfg *ioa_cfg) |
| { |
| struct ipr_cmnd *ipr_cmd; |
| |
| ipr_cmd = list_entry(ioa_cfg->free_q.next, struct ipr_cmnd, queue); |
| list_del(&ipr_cmd->queue); |
| ipr_init_ipr_cmnd(ipr_cmd); |
| |
| return ipr_cmd; |
| } |
| |
| /** |
| * ipr_mask_and_clear_interrupts - Mask all and clear specified interrupts |
| * @ioa_cfg: ioa config struct |
| * @clr_ints: interrupts to clear |
| * |
| * This function masks all interrupts on the adapter, then clears the |
| * interrupts specified in the mask |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_mask_and_clear_interrupts(struct ipr_ioa_cfg *ioa_cfg, |
| u32 clr_ints) |
| { |
| volatile u32 int_reg; |
| |
| /* Stop new interrupts */ |
| ioa_cfg->allow_interrupts = 0; |
| |
| /* Set interrupt mask to stop all new interrupts */ |
| writel(~0, ioa_cfg->regs.set_interrupt_mask_reg); |
| |
| /* Clear any pending interrupts */ |
| writel(clr_ints, ioa_cfg->regs.clr_interrupt_reg); |
| int_reg = readl(ioa_cfg->regs.sense_interrupt_reg); |
| } |
| |
| /** |
| * ipr_save_pcix_cmd_reg - Save PCI-X command register |
| * @ioa_cfg: ioa config struct |
| * |
| * Return value: |
| * 0 on success / -EIO on failure |
| **/ |
| static int ipr_save_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg) |
| { |
| int pcix_cmd_reg = pci_find_capability(ioa_cfg->pdev, PCI_CAP_ID_PCIX); |
| |
| if (pcix_cmd_reg == 0) |
| return 0; |
| |
| if (pci_read_config_word(ioa_cfg->pdev, pcix_cmd_reg + PCI_X_CMD, |
| &ioa_cfg->saved_pcix_cmd_reg) != PCIBIOS_SUCCESSFUL) { |
| dev_err(&ioa_cfg->pdev->dev, "Failed to save PCI-X command register\n"); |
| return -EIO; |
| } |
| |
| ioa_cfg->saved_pcix_cmd_reg |= PCI_X_CMD_DPERR_E | PCI_X_CMD_ERO; |
| return 0; |
| } |
| |
| /** |
| * ipr_set_pcix_cmd_reg - Setup PCI-X command register |
| * @ioa_cfg: ioa config struct |
| * |
| * Return value: |
| * 0 on success / -EIO on failure |
| **/ |
| static int ipr_set_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg) |
| { |
| int pcix_cmd_reg = pci_find_capability(ioa_cfg->pdev, PCI_CAP_ID_PCIX); |
| |
| if (pcix_cmd_reg) { |
| if (pci_write_config_word(ioa_cfg->pdev, pcix_cmd_reg + PCI_X_CMD, |
| ioa_cfg->saved_pcix_cmd_reg) != PCIBIOS_SUCCESSFUL) { |
| dev_err(&ioa_cfg->pdev->dev, "Failed to setup PCI-X command register\n"); |
| return -EIO; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ipr_sata_eh_done - done function for aborted SATA commands |
| * @ipr_cmd: ipr command struct |
| * |
| * This function is invoked for ops generated to SATA |
| * devices which are being aborted. |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_sata_eh_done(struct ipr_cmnd *ipr_cmd) |
| { |
| struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; |
| struct ata_queued_cmd *qc = ipr_cmd->qc; |
| struct ipr_sata_port *sata_port = qc->ap->private_data; |
| |
| qc->err_mask |= AC_ERR_OTHER; |
| sata_port->ioasa.status |= ATA_BUSY; |
| list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); |
| ata_qc_complete(qc); |
| } |
| |
| /** |
| * ipr_scsi_eh_done - mid-layer done function for aborted ops |
| * @ipr_cmd: ipr command struct |
| * |
| * This function is invoked by the interrupt handler for |
| * ops generated by the SCSI mid-layer which are being aborted. |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_scsi_eh_done(struct ipr_cmnd *ipr_cmd) |
| { |
| struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; |
| struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd; |
| |
| scsi_cmd->result |= (DID_ERROR << 16); |
| |
| scsi_dma_unmap(ipr_cmd->scsi_cmd); |
| scsi_cmd->scsi_done(scsi_cmd); |
| list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); |
| } |
| |
| /** |
| * ipr_fail_all_ops - Fails all outstanding ops. |
| * @ioa_cfg: ioa config struct |
| * |
| * This function fails all outstanding ops. |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_fail_all_ops(struct ipr_ioa_cfg *ioa_cfg) |
| { |
| struct ipr_cmnd *ipr_cmd, *temp; |
| |
| ENTER; |
| list_for_each_entry_safe(ipr_cmd, temp, &ioa_cfg->pending_q, queue) { |
| list_del(&ipr_cmd->queue); |
| |
| ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_IOA_WAS_RESET); |
| ipr_cmd->ioasa.ilid = cpu_to_be32(IPR_DRIVER_ILID); |
| |
| if (ipr_cmd->scsi_cmd) |
| ipr_cmd->done = ipr_scsi_eh_done; |
| else if (ipr_cmd->qc) |
| ipr_cmd->done = ipr_sata_eh_done; |
| |
| ipr_trc_hook(ipr_cmd, IPR_TRACE_FINISH, IPR_IOASC_IOA_WAS_RESET); |
| del_timer(&ipr_cmd->timer); |
| ipr_cmd->done(ipr_cmd); |
| } |
| |
| LEAVE; |
| } |
| |
| /** |
| * ipr_do_req - Send driver initiated requests. |
| * @ipr_cmd: ipr command struct |
| * @done: done function |
| * @timeout_func: timeout function |
| * @timeout: timeout value |
| * |
| * This function sends the specified command to the adapter with the |
| * timeout given. The done function is invoked on command completion. |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_do_req(struct ipr_cmnd *ipr_cmd, |
| void (*done) (struct ipr_cmnd *), |
| void (*timeout_func) (struct ipr_cmnd *), u32 timeout) |
| { |
| struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; |
| |
| list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q); |
| |
| ipr_cmd->done = done; |
| |
| ipr_cmd->timer.data = (unsigned long) ipr_cmd; |
| ipr_cmd->timer.expires = jiffies + timeout; |
| ipr_cmd->timer.function = (void (*)(unsigned long))timeout_func; |
| |
| add_timer(&ipr_cmd->timer); |
| |
| ipr_trc_hook(ipr_cmd, IPR_TRACE_START, 0); |
| |
| mb(); |
| writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr), |
| ioa_cfg->regs.ioarrin_reg); |
| } |
| |
| /** |
| * ipr_internal_cmd_done - Op done function for an internally generated op. |
| * @ipr_cmd: ipr command struct |
| * |
| * This function is the op done function for an internally generated, |
| * blocking op. It simply wakes the sleeping thread. |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_internal_cmd_done(struct ipr_cmnd *ipr_cmd) |
| { |
| if (ipr_cmd->sibling) |
| ipr_cmd->sibling = NULL; |
| else |
| complete(&ipr_cmd->completion); |
| } |
| |
| /** |
| * ipr_send_blocking_cmd - Send command and sleep on its completion. |
| * @ipr_cmd: ipr command struct |
| * @timeout_func: function to invoke if command times out |
| * @timeout: timeout |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_send_blocking_cmd(struct ipr_cmnd *ipr_cmd, |
| void (*timeout_func) (struct ipr_cmnd *ipr_cmd), |
| u32 timeout) |
| { |
| struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; |
| |
| init_completion(&ipr_cmd->completion); |
| ipr_do_req(ipr_cmd, ipr_internal_cmd_done, timeout_func, timeout); |
| |
| spin_unlock_irq(ioa_cfg->host->host_lock); |
| wait_for_completion(&ipr_cmd->completion); |
| spin_lock_irq(ioa_cfg->host->host_lock); |
| } |
| |
| /** |
| * ipr_send_hcam - Send an HCAM to the adapter. |
| * @ioa_cfg: ioa config struct |
| * @type: HCAM type |
| * @hostrcb: hostrcb struct |
| * |
| * This function will send a Host Controlled Async command to the adapter. |
| * If HCAMs are currently not allowed to be issued to the adapter, it will |
| * place the hostrcb on the free queue. |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_send_hcam(struct ipr_ioa_cfg *ioa_cfg, u8 type, |
| struct ipr_hostrcb *hostrcb) |
| { |
| struct ipr_cmnd *ipr_cmd; |
| struct ipr_ioarcb *ioarcb; |
| |
| if (ioa_cfg->allow_cmds) { |
| ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg); |
| list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q); |
| list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_pending_q); |
| |
| ipr_cmd->u.hostrcb = hostrcb; |
| ioarcb = &ipr_cmd->ioarcb; |
| |
| ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); |
| ioarcb->cmd_pkt.request_type = IPR_RQTYPE_HCAM; |
| ioarcb->cmd_pkt.cdb[0] = IPR_HOST_CONTROLLED_ASYNC; |
| ioarcb->cmd_pkt.cdb[1] = type; |
| ioarcb->cmd_pkt.cdb[7] = (sizeof(hostrcb->hcam) >> 8) & 0xff; |
| ioarcb->cmd_pkt.cdb[8] = sizeof(hostrcb->hcam) & 0xff; |
| |
| ioarcb->read_data_transfer_length = cpu_to_be32(sizeof(hostrcb->hcam)); |
| ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc)); |
| ipr_cmd->ioadl[0].flags_and_data_len = |
| cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | sizeof(hostrcb->hcam)); |
| ipr_cmd->ioadl[0].address = cpu_to_be32(hostrcb->hostrcb_dma); |
| |
| if (type == IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE) |
| ipr_cmd->done = ipr_process_ccn; |
| else |
| ipr_cmd->done = ipr_process_error; |
| |
| ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_IOA_RES_ADDR); |
| |
| mb(); |
| writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr), |
| ioa_cfg->regs.ioarrin_reg); |
| } else { |
| list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q); |
| } |
| } |
| |
| /** |
| * ipr_init_res_entry - Initialize a resource entry struct. |
| * @res: resource entry struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_init_res_entry(struct ipr_resource_entry *res) |
| { |
| res->needs_sync_complete = 0; |
| res->in_erp = 0; |
| res->add_to_ml = 0; |
| res->del_from_ml = 0; |
| res->resetting_device = 0; |
| res->sdev = NULL; |
| res->sata_port = NULL; |
| } |
| |
| /** |
| * ipr_handle_config_change - Handle a config change from the adapter |
| * @ioa_cfg: ioa config struct |
| * @hostrcb: hostrcb |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_handle_config_change(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_hostrcb *hostrcb) |
| { |
| struct ipr_resource_entry *res = NULL; |
| struct ipr_config_table_entry *cfgte; |
| u32 is_ndn = 1; |
| |
| cfgte = &hostrcb->hcam.u.ccn.cfgte; |
| |
| list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { |
| if (!memcmp(&res->cfgte.res_addr, &cfgte->res_addr, |
| sizeof(cfgte->res_addr))) { |
| is_ndn = 0; |
| break; |
| } |
| } |
| |
| if (is_ndn) { |
| if (list_empty(&ioa_cfg->free_res_q)) { |
| ipr_send_hcam(ioa_cfg, |
| IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, |
| hostrcb); |
| return; |
| } |
| |
| res = list_entry(ioa_cfg->free_res_q.next, |
| struct ipr_resource_entry, queue); |
| |
| list_del(&res->queue); |
| ipr_init_res_entry(res); |
| list_add_tail(&res->queue, &ioa_cfg->used_res_q); |
| } |
| |
| memcpy(&res->cfgte, cfgte, sizeof(struct ipr_config_table_entry)); |
| |
| if (hostrcb->hcam.notify_type == IPR_HOST_RCB_NOTIF_TYPE_REM_ENTRY) { |
| if (res->sdev) { |
| res->del_from_ml = 1; |
| res->cfgte.res_handle = IPR_INVALID_RES_HANDLE; |
| if (ioa_cfg->allow_ml_add_del) |
| schedule_work(&ioa_cfg->work_q); |
| } else |
| list_move_tail(&res->queue, &ioa_cfg->free_res_q); |
| } else if (!res->sdev) { |
| res->add_to_ml = 1; |
| if (ioa_cfg->allow_ml_add_del) |
| schedule_work(&ioa_cfg->work_q); |
| } |
| |
| ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb); |
| } |
| |
| /** |
| * ipr_process_ccn - Op done function for a CCN. |
| * @ipr_cmd: ipr command struct |
| * |
| * This function is the op done function for a configuration |
| * change notification host controlled async from the adapter. |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_process_ccn(struct ipr_cmnd *ipr_cmd) |
| { |
| struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; |
| struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb; |
| u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc); |
| |
| list_del(&hostrcb->queue); |
| list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); |
| |
| if (ioasc) { |
| if (ioasc != IPR_IOASC_IOA_WAS_RESET) |
| dev_err(&ioa_cfg->pdev->dev, |
| "Host RCB failed with IOASC: 0x%08X\n", ioasc); |
| |
| ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb); |
| } else { |
| ipr_handle_config_change(ioa_cfg, hostrcb); |
| } |
| } |
| |
| /** |
| * strip_and_pad_whitespace - Strip and pad trailing whitespace. |
| * @i: index into buffer |
| * @buf: string to modify |
| * |
| * This function will strip all trailing whitespace, pad the end |
| * of the string with a single space, and NULL terminate the string. |
| * |
| * Return value: |
| * new length of string |
| **/ |
| static int strip_and_pad_whitespace(int i, char *buf) |
| { |
| while (i && buf[i] == ' ') |
| i--; |
| buf[i+1] = ' '; |
| buf[i+2] = '\0'; |
| return i + 2; |
| } |
| |
| /** |
| * ipr_log_vpd_compact - Log the passed extended VPD compactly. |
| * @prefix: string to print at start of printk |
| * @hostrcb: hostrcb pointer |
| * @vpd: vendor/product id/sn struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_vpd_compact(char *prefix, struct ipr_hostrcb *hostrcb, |
| struct ipr_vpd *vpd) |
| { |
| char buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN + IPR_SERIAL_NUM_LEN + 3]; |
| int i = 0; |
| |
| memcpy(buffer, vpd->vpids.vendor_id, IPR_VENDOR_ID_LEN); |
| i = strip_and_pad_whitespace(IPR_VENDOR_ID_LEN - 1, buffer); |
| |
| memcpy(&buffer[i], vpd->vpids.product_id, IPR_PROD_ID_LEN); |
| i = strip_and_pad_whitespace(i + IPR_PROD_ID_LEN - 1, buffer); |
| |
| memcpy(&buffer[i], vpd->sn, IPR_SERIAL_NUM_LEN); |
| buffer[IPR_SERIAL_NUM_LEN + i] = '\0'; |
| |
| ipr_hcam_err(hostrcb, "%s VPID/SN: %s\n", prefix, buffer); |
| } |
| |
| /** |
| * ipr_log_vpd - Log the passed VPD to the error log. |
| * @vpd: vendor/product id/sn struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_vpd(struct ipr_vpd *vpd) |
| { |
| char buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN |
| + IPR_SERIAL_NUM_LEN]; |
| |
| memcpy(buffer, vpd->vpids.vendor_id, IPR_VENDOR_ID_LEN); |
| memcpy(buffer + IPR_VENDOR_ID_LEN, vpd->vpids.product_id, |
| IPR_PROD_ID_LEN); |
| buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN] = '\0'; |
| ipr_err("Vendor/Product ID: %s\n", buffer); |
| |
| memcpy(buffer, vpd->sn, IPR_SERIAL_NUM_LEN); |
| buffer[IPR_SERIAL_NUM_LEN] = '\0'; |
| ipr_err(" Serial Number: %s\n", buffer); |
| } |
| |
| /** |
| * ipr_log_ext_vpd_compact - Log the passed extended VPD compactly. |
| * @prefix: string to print at start of printk |
| * @hostrcb: hostrcb pointer |
| * @vpd: vendor/product id/sn/wwn struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_ext_vpd_compact(char *prefix, struct ipr_hostrcb *hostrcb, |
| struct ipr_ext_vpd *vpd) |
| { |
| ipr_log_vpd_compact(prefix, hostrcb, &vpd->vpd); |
| ipr_hcam_err(hostrcb, "%s WWN: %08X%08X\n", prefix, |
| be32_to_cpu(vpd->wwid[0]), be32_to_cpu(vpd->wwid[1])); |
| } |
| |
| /** |
| * ipr_log_ext_vpd - Log the passed extended VPD to the error log. |
| * @vpd: vendor/product id/sn/wwn struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_ext_vpd(struct ipr_ext_vpd *vpd) |
| { |
| ipr_log_vpd(&vpd->vpd); |
| ipr_err(" WWN: %08X%08X\n", be32_to_cpu(vpd->wwid[0]), |
| be32_to_cpu(vpd->wwid[1])); |
| } |
| |
| /** |
| * ipr_log_enhanced_cache_error - Log a cache error. |
| * @ioa_cfg: ioa config struct |
| * @hostrcb: hostrcb struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_enhanced_cache_error(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_hostrcb *hostrcb) |
| { |
| struct ipr_hostrcb_type_12_error *error = |
| &hostrcb->hcam.u.error.u.type_12_error; |
| |
| ipr_err("-----Current Configuration-----\n"); |
| ipr_err("Cache Directory Card Information:\n"); |
| ipr_log_ext_vpd(&error->ioa_vpd); |
| ipr_err("Adapter Card Information:\n"); |
| ipr_log_ext_vpd(&error->cfc_vpd); |
| |
| ipr_err("-----Expected Configuration-----\n"); |
| ipr_err("Cache Directory Card Information:\n"); |
| ipr_log_ext_vpd(&error->ioa_last_attached_to_cfc_vpd); |
| ipr_err("Adapter Card Information:\n"); |
| ipr_log_ext_vpd(&error->cfc_last_attached_to_ioa_vpd); |
| |
| ipr_err("Additional IOA Data: %08X %08X %08X\n", |
| be32_to_cpu(error->ioa_data[0]), |
| be32_to_cpu(error->ioa_data[1]), |
| be32_to_cpu(error->ioa_data[2])); |
| } |
| |
| /** |
| * ipr_log_cache_error - Log a cache error. |
| * @ioa_cfg: ioa config struct |
| * @hostrcb: hostrcb struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_cache_error(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_hostrcb *hostrcb) |
| { |
| struct ipr_hostrcb_type_02_error *error = |
| &hostrcb->hcam.u.error.u.type_02_error; |
| |
| ipr_err("-----Current Configuration-----\n"); |
| ipr_err("Cache Directory Card Information:\n"); |
| ipr_log_vpd(&error->ioa_vpd); |
| ipr_err("Adapter Card Information:\n"); |
| ipr_log_vpd(&error->cfc_vpd); |
| |
| ipr_err("-----Expected Configuration-----\n"); |
| ipr_err("Cache Directory Card Information:\n"); |
| ipr_log_vpd(&error->ioa_last_attached_to_cfc_vpd); |
| ipr_err("Adapter Card Information:\n"); |
| ipr_log_vpd(&error->cfc_last_attached_to_ioa_vpd); |
| |
| ipr_err("Additional IOA Data: %08X %08X %08X\n", |
| be32_to_cpu(error->ioa_data[0]), |
| be32_to_cpu(error->ioa_data[1]), |
| be32_to_cpu(error->ioa_data[2])); |
| } |
| |
| /** |
| * ipr_log_enhanced_config_error - Log a configuration error. |
| * @ioa_cfg: ioa config struct |
| * @hostrcb: hostrcb struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_enhanced_config_error(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_hostrcb *hostrcb) |
| { |
| int errors_logged, i; |
| struct ipr_hostrcb_device_data_entry_enhanced *dev_entry; |
| struct ipr_hostrcb_type_13_error *error; |
| |
| error = &hostrcb->hcam.u.error.u.type_13_error; |
| errors_logged = be32_to_cpu(error->errors_logged); |
| |
| ipr_err("Device Errors Detected/Logged: %d/%d\n", |
| be32_to_cpu(error->errors_detected), errors_logged); |
| |
| dev_entry = error->dev; |
| |
| for (i = 0; i < errors_logged; i++, dev_entry++) { |
| ipr_err_separator; |
| |
| ipr_phys_res_err(ioa_cfg, dev_entry->dev_res_addr, "Device %d", i + 1); |
| ipr_log_ext_vpd(&dev_entry->vpd); |
| |
| ipr_err("-----New Device Information-----\n"); |
| ipr_log_ext_vpd(&dev_entry->new_vpd); |
| |
| ipr_err("Cache Directory Card Information:\n"); |
| ipr_log_ext_vpd(&dev_entry->ioa_last_with_dev_vpd); |
| |
| ipr_err("Adapter Card Information:\n"); |
| ipr_log_ext_vpd(&dev_entry->cfc_last_with_dev_vpd); |
| } |
| } |
| |
| /** |
| * ipr_log_config_error - Log a configuration error. |
| * @ioa_cfg: ioa config struct |
| * @hostrcb: hostrcb struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_config_error(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_hostrcb *hostrcb) |
| { |
| int errors_logged, i; |
| struct ipr_hostrcb_device_data_entry *dev_entry; |
| struct ipr_hostrcb_type_03_error *error; |
| |
| error = &hostrcb->hcam.u.error.u.type_03_error; |
| errors_logged = be32_to_cpu(error->errors_logged); |
| |
| ipr_err("Device Errors Detected/Logged: %d/%d\n", |
| be32_to_cpu(error->errors_detected), errors_logged); |
| |
| dev_entry = error->dev; |
| |
| for (i = 0; i < errors_logged; i++, dev_entry++) { |
| ipr_err_separator; |
| |
| ipr_phys_res_err(ioa_cfg, dev_entry->dev_res_addr, "Device %d", i + 1); |
| ipr_log_vpd(&dev_entry->vpd); |
| |
| ipr_err("-----New Device Information-----\n"); |
| ipr_log_vpd(&dev_entry->new_vpd); |
| |
| ipr_err("Cache Directory Card Information:\n"); |
| ipr_log_vpd(&dev_entry->ioa_last_with_dev_vpd); |
| |
| ipr_err("Adapter Card Information:\n"); |
| ipr_log_vpd(&dev_entry->cfc_last_with_dev_vpd); |
| |
| ipr_err("Additional IOA Data: %08X %08X %08X %08X %08X\n", |
| be32_to_cpu(dev_entry->ioa_data[0]), |
| be32_to_cpu(dev_entry->ioa_data[1]), |
| be32_to_cpu(dev_entry->ioa_data[2]), |
| be32_to_cpu(dev_entry->ioa_data[3]), |
| be32_to_cpu(dev_entry->ioa_data[4])); |
| } |
| } |
| |
| /** |
| * ipr_log_enhanced_array_error - Log an array configuration error. |
| * @ioa_cfg: ioa config struct |
| * @hostrcb: hostrcb struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_enhanced_array_error(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_hostrcb *hostrcb) |
| { |
| int i, num_entries; |
| struct ipr_hostrcb_type_14_error *error; |
| struct ipr_hostrcb_array_data_entry_enhanced *array_entry; |
| const u8 zero_sn[IPR_SERIAL_NUM_LEN] = { [0 ... IPR_SERIAL_NUM_LEN-1] = '0' }; |
| |
| error = &hostrcb->hcam.u.error.u.type_14_error; |
| |
| ipr_err_separator; |
| |
| ipr_err("RAID %s Array Configuration: %d:%d:%d:%d\n", |
| error->protection_level, |
| ioa_cfg->host->host_no, |
| error->last_func_vset_res_addr.bus, |
| error->last_func_vset_res_addr.target, |
| error->last_func_vset_res_addr.lun); |
| |
| ipr_err_separator; |
| |
| array_entry = error->array_member; |
| num_entries = min_t(u32, be32_to_cpu(error->num_entries), |
| sizeof(error->array_member)); |
| |
| for (i = 0; i < num_entries; i++, array_entry++) { |
| if (!memcmp(array_entry->vpd.vpd.sn, zero_sn, IPR_SERIAL_NUM_LEN)) |
| continue; |
| |
| if (be32_to_cpu(error->exposed_mode_adn) == i) |
| ipr_err("Exposed Array Member %d:\n", i); |
| else |
| ipr_err("Array Member %d:\n", i); |
| |
| ipr_log_ext_vpd(&array_entry->vpd); |
| ipr_phys_res_err(ioa_cfg, array_entry->dev_res_addr, "Current Location"); |
| ipr_phys_res_err(ioa_cfg, array_entry->expected_dev_res_addr, |
| "Expected Location"); |
| |
| ipr_err_separator; |
| } |
| } |
| |
| /** |
| * ipr_log_array_error - Log an array configuration error. |
| * @ioa_cfg: ioa config struct |
| * @hostrcb: hostrcb struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_array_error(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_hostrcb *hostrcb) |
| { |
| int i; |
| struct ipr_hostrcb_type_04_error *error; |
| struct ipr_hostrcb_array_data_entry *array_entry; |
| const u8 zero_sn[IPR_SERIAL_NUM_LEN] = { [0 ... IPR_SERIAL_NUM_LEN-1] = '0' }; |
| |
| error = &hostrcb->hcam.u.error.u.type_04_error; |
| |
| ipr_err_separator; |
| |
| ipr_err("RAID %s Array Configuration: %d:%d:%d:%d\n", |
| error->protection_level, |
| ioa_cfg->host->host_no, |
| error->last_func_vset_res_addr.bus, |
| error->last_func_vset_res_addr.target, |
| error->last_func_vset_res_addr.lun); |
| |
| ipr_err_separator; |
| |
| array_entry = error->array_member; |
| |
| for (i = 0; i < 18; i++) { |
| if (!memcmp(array_entry->vpd.sn, zero_sn, IPR_SERIAL_NUM_LEN)) |
| continue; |
| |
| if (be32_to_cpu(error->exposed_mode_adn) == i) |
| ipr_err("Exposed Array Member %d:\n", i); |
| else |
| ipr_err("Array Member %d:\n", i); |
| |
| ipr_log_vpd(&array_entry->vpd); |
| |
| ipr_phys_res_err(ioa_cfg, array_entry->dev_res_addr, "Current Location"); |
| ipr_phys_res_err(ioa_cfg, array_entry->expected_dev_res_addr, |
| "Expected Location"); |
| |
| ipr_err_separator; |
| |
| if (i == 9) |
| array_entry = error->array_member2; |
| else |
| array_entry++; |
| } |
| } |
| |
| /** |
| * ipr_log_hex_data - Log additional hex IOA error data. |
| * @ioa_cfg: ioa config struct |
| * @data: IOA error data |
| * @len: data length |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_hex_data(struct ipr_ioa_cfg *ioa_cfg, u32 *data, int len) |
| { |
| int i; |
| |
| if (len == 0) |
| return; |
| |
| if (ioa_cfg->log_level <= IPR_DEFAULT_LOG_LEVEL) |
| len = min_t(int, len, IPR_DEFAULT_MAX_ERROR_DUMP); |
| |
| for (i = 0; i < len / 4; i += 4) { |
| ipr_err("%08X: %08X %08X %08X %08X\n", i*4, |
| be32_to_cpu(data[i]), |
| be32_to_cpu(data[i+1]), |
| be32_to_cpu(data[i+2]), |
| be32_to_cpu(data[i+3])); |
| } |
| } |
| |
| /** |
| * ipr_log_enhanced_dual_ioa_error - Log an enhanced dual adapter error. |
| * @ioa_cfg: ioa config struct |
| * @hostrcb: hostrcb struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_enhanced_dual_ioa_error(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_hostrcb *hostrcb) |
| { |
| struct ipr_hostrcb_type_17_error *error; |
| |
| error = &hostrcb->hcam.u.error.u.type_17_error; |
| error->failure_reason[sizeof(error->failure_reason) - 1] = '\0'; |
| strstrip(error->failure_reason); |
| |
| ipr_hcam_err(hostrcb, "%s [PRC: %08X]\n", error->failure_reason, |
| be32_to_cpu(hostrcb->hcam.u.error.prc)); |
| ipr_log_ext_vpd_compact("Remote IOA", hostrcb, &error->vpd); |
| ipr_log_hex_data(ioa_cfg, error->data, |
| be32_to_cpu(hostrcb->hcam.length) - |
| (offsetof(struct ipr_hostrcb_error, u) + |
| offsetof(struct ipr_hostrcb_type_17_error, data))); |
| } |
| |
| /** |
| * ipr_log_dual_ioa_error - Log a dual adapter error. |
| * @ioa_cfg: ioa config struct |
| * @hostrcb: hostrcb struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_dual_ioa_error(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_hostrcb *hostrcb) |
| { |
| struct ipr_hostrcb_type_07_error *error; |
| |
| error = &hostrcb->hcam.u.error.u.type_07_error; |
| error->failure_reason[sizeof(error->failure_reason) - 1] = '\0'; |
| strstrip(error->failure_reason); |
| |
| ipr_hcam_err(hostrcb, "%s [PRC: %08X]\n", error->failure_reason, |
| be32_to_cpu(hostrcb->hcam.u.error.prc)); |
| ipr_log_vpd_compact("Remote IOA", hostrcb, &error->vpd); |
| ipr_log_hex_data(ioa_cfg, error->data, |
| be32_to_cpu(hostrcb->hcam.length) - |
| (offsetof(struct ipr_hostrcb_error, u) + |
| offsetof(struct ipr_hostrcb_type_07_error, data))); |
| } |
| |
| static const struct { |
| u8 active; |
| char *desc; |
| } path_active_desc[] = { |
| { IPR_PATH_NO_INFO, "Path" }, |
| { IPR_PATH_ACTIVE, "Active path" }, |
| { IPR_PATH_NOT_ACTIVE, "Inactive path" } |
| }; |
| |
| static const struct { |
| u8 state; |
| char *desc; |
| } path_state_desc[] = { |
| { IPR_PATH_STATE_NO_INFO, "has no path state information available" }, |
| { IPR_PATH_HEALTHY, "is healthy" }, |
| { IPR_PATH_DEGRADED, "is degraded" }, |
| { IPR_PATH_FAILED, "is failed" } |
| }; |
| |
| /** |
| * ipr_log_fabric_path - Log a fabric path error |
| * @hostrcb: hostrcb struct |
| * @fabric: fabric descriptor |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_fabric_path(struct ipr_hostrcb *hostrcb, |
| struct ipr_hostrcb_fabric_desc *fabric) |
| { |
| int i, j; |
| u8 path_state = fabric->path_state; |
| u8 active = path_state & IPR_PATH_ACTIVE_MASK; |
| u8 state = path_state & IPR_PATH_STATE_MASK; |
| |
| for (i = 0; i < ARRAY_SIZE(path_active_desc); i++) { |
| if (path_active_desc[i].active != active) |
| continue; |
| |
| for (j = 0; j < ARRAY_SIZE(path_state_desc); j++) { |
| if (path_state_desc[j].state != state) |
| continue; |
| |
| if (fabric->cascaded_expander == 0xff && fabric->phy == 0xff) { |
| ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d\n", |
| path_active_desc[i].desc, path_state_desc[j].desc, |
| fabric->ioa_port); |
| } else if (fabric->cascaded_expander == 0xff) { |
| ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d, Phy=%d\n", |
| path_active_desc[i].desc, path_state_desc[j].desc, |
| fabric->ioa_port, fabric->phy); |
| } else if (fabric->phy == 0xff) { |
| ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d, Cascade=%d\n", |
| path_active_desc[i].desc, path_state_desc[j].desc, |
| fabric->ioa_port, fabric->cascaded_expander); |
| } else { |
| ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d, Cascade=%d, Phy=%d\n", |
| path_active_desc[i].desc, path_state_desc[j].desc, |
| fabric->ioa_port, fabric->cascaded_expander, fabric->phy); |
| } |
| return; |
| } |
| } |
| |
| ipr_err("Path state=%02X IOA Port=%d Cascade=%d Phy=%d\n", path_state, |
| fabric->ioa_port, fabric->cascaded_expander, fabric->phy); |
| } |
| |
| static const struct { |
| u8 type; |
| char *desc; |
| } path_type_desc[] = { |
| { IPR_PATH_CFG_IOA_PORT, "IOA port" }, |
| { IPR_PATH_CFG_EXP_PORT, "Expander port" }, |
| { IPR_PATH_CFG_DEVICE_PORT, "Device port" }, |
| { IPR_PATH_CFG_DEVICE_LUN, "Device LUN" } |
| }; |
| |
| static const struct { |
| u8 status; |
| char *desc; |
| } path_status_desc[] = { |
| { IPR_PATH_CFG_NO_PROB, "Functional" }, |
| { IPR_PATH_CFG_DEGRADED, "Degraded" }, |
| { IPR_PATH_CFG_FAILED, "Failed" }, |
| { IPR_PATH_CFG_SUSPECT, "Suspect" }, |
| { IPR_PATH_NOT_DETECTED, "Missing" }, |
| { IPR_PATH_INCORRECT_CONN, "Incorrectly connected" } |
| }; |
| |
| static const char *link_rate[] = { |
| "unknown", |
| "disabled", |
| "phy reset problem", |
| "spinup hold", |
| "port selector", |
| "unknown", |
| "unknown", |
| "unknown", |
| "1.5Gbps", |
| "3.0Gbps", |
| "unknown", |
| "unknown", |
| "unknown", |
| "unknown", |
| "unknown", |
| "unknown" |
| }; |
| |
| /** |
| * ipr_log_path_elem - Log a fabric path element. |
| * @hostrcb: hostrcb struct |
| * @cfg: fabric path element struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_path_elem(struct ipr_hostrcb *hostrcb, |
| struct ipr_hostrcb_config_element *cfg) |
| { |
| int i, j; |
| u8 type = cfg->type_status & IPR_PATH_CFG_TYPE_MASK; |
| u8 status = cfg->type_status & IPR_PATH_CFG_STATUS_MASK; |
| |
| if (type == IPR_PATH_CFG_NOT_EXIST) |
| return; |
| |
| for (i = 0; i < ARRAY_SIZE(path_type_desc); i++) { |
| if (path_type_desc[i].type != type) |
| continue; |
| |
| for (j = 0; j < ARRAY_SIZE(path_status_desc); j++) { |
| if (path_status_desc[j].status != status) |
| continue; |
| |
| if (type == IPR_PATH_CFG_IOA_PORT) { |
| ipr_hcam_err(hostrcb, "%s %s: Phy=%d, Link rate=%s, WWN=%08X%08X\n", |
| path_status_desc[j].desc, path_type_desc[i].desc, |
| cfg->phy, link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK], |
| be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1])); |
| } else { |
| if (cfg->cascaded_expander == 0xff && cfg->phy == 0xff) { |
| ipr_hcam_err(hostrcb, "%s %s: Link rate=%s, WWN=%08X%08X\n", |
| path_status_desc[j].desc, path_type_desc[i].desc, |
| link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK], |
| be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1])); |
| } else if (cfg->cascaded_expander == 0xff) { |
| ipr_hcam_err(hostrcb, "%s %s: Phy=%d, Link rate=%s, " |
| "WWN=%08X%08X\n", path_status_desc[j].desc, |
| path_type_desc[i].desc, cfg->phy, |
| link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK], |
| be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1])); |
| } else if (cfg->phy == 0xff) { |
| ipr_hcam_err(hostrcb, "%s %s: Cascade=%d, Link rate=%s, " |
| "WWN=%08X%08X\n", path_status_desc[j].desc, |
| path_type_desc[i].desc, cfg->cascaded_expander, |
| link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK], |
| be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1])); |
| } else { |
| ipr_hcam_err(hostrcb, "%s %s: Cascade=%d, Phy=%d, Link rate=%s " |
| "WWN=%08X%08X\n", path_status_desc[j].desc, |
| path_type_desc[i].desc, cfg->cascaded_expander, cfg->phy, |
| link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK], |
| be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1])); |
| } |
| } |
| return; |
| } |
| } |
| |
| ipr_hcam_err(hostrcb, "Path element=%02X: Cascade=%d Phy=%d Link rate=%s " |
| "WWN=%08X%08X\n", cfg->type_status, cfg->cascaded_expander, cfg->phy, |
| link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK], |
| be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1])); |
| } |
| |
| /** |
| * ipr_log_fabric_error - Log a fabric error. |
| * @ioa_cfg: ioa config struct |
| * @hostrcb: hostrcb struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_fabric_error(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_hostrcb *hostrcb) |
| { |
| struct ipr_hostrcb_type_20_error *error; |
| struct ipr_hostrcb_fabric_desc *fabric; |
| struct ipr_hostrcb_config_element *cfg; |
| int i, add_len; |
| |
| error = &hostrcb->hcam.u.error.u.type_20_error; |
| error->failure_reason[sizeof(error->failure_reason) - 1] = '\0'; |
| ipr_hcam_err(hostrcb, "%s\n", error->failure_reason); |
| |
| add_len = be32_to_cpu(hostrcb->hcam.length) - |
| (offsetof(struct ipr_hostrcb_error, u) + |
| offsetof(struct ipr_hostrcb_type_20_error, desc)); |
| |
| for (i = 0, fabric = error->desc; i < error->num_entries; i++) { |
| ipr_log_fabric_path(hostrcb, fabric); |
| for_each_fabric_cfg(fabric, cfg) |
| ipr_log_path_elem(hostrcb, cfg); |
| |
| add_len -= be16_to_cpu(fabric->length); |
| fabric = (struct ipr_hostrcb_fabric_desc *) |
| ((unsigned long)fabric + be16_to_cpu(fabric->length)); |
| } |
| |
| ipr_log_hex_data(ioa_cfg, (u32 *)fabric, add_len); |
| } |
| |
| /** |
| * ipr_log_generic_error - Log an adapter error. |
| * @ioa_cfg: ioa config struct |
| * @hostrcb: hostrcb struct |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_log_generic_error(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_hostrcb *hostrcb) |
| { |
| ipr_log_hex_data(ioa_cfg, hostrcb->hcam.u.raw.data, |
| be32_to_cpu(hostrcb->hcam.length)); |
| } |
| |
| /** |
| * ipr_get_error - Find the specfied IOASC in the ipr_error_table. |
| * @ioasc: IOASC |
| * |
| * This function will return the index of into the ipr_error_table |
| * for the specified IOASC. If the IOASC is not in the table, |
| * 0 will be returned, which points to the entry used for unknown errors. |
| * |
| * Return value: |
| * index into the ipr_error_table |
| **/ |
| static u32 ipr_get_error(u32 ioasc) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(ipr_error_table); i++) |
| if (ipr_error_table[i].ioasc == (ioasc & IPR_IOASC_IOASC_MASK)) |
| return i; |
| |
| return 0; |
| } |
| |
| /** |
| * ipr_handle_log_data - Log an adapter error. |
| * @ioa_cfg: ioa config struct |
| * @hostrcb: hostrcb struct |
| * |
| * This function logs an adapter error to the system. |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_handle_log_data(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_hostrcb *hostrcb) |
| { |
| u32 ioasc; |
| int error_index; |
| |
| if (hostrcb->hcam.notify_type != IPR_HOST_RCB_NOTIF_TYPE_ERROR_LOG_ENTRY) |
| return; |
| |
| if (hostrcb->hcam.notifications_lost == IPR_HOST_RCB_NOTIFICATIONS_LOST) |
| dev_err(&ioa_cfg->pdev->dev, "Error notifications lost\n"); |
| |
| ioasc = be32_to_cpu(hostrcb->hcam.u.error.failing_dev_ioasc); |
| |
| if (ioasc == IPR_IOASC_BUS_WAS_RESET || |
| ioasc == IPR_IOASC_BUS_WAS_RESET_BY_OTHER) { |
| /* Tell the midlayer we had a bus reset so it will handle the UA properly */ |
| scsi_report_bus_reset(ioa_cfg->host, |
| hostrcb->hcam.u.error.failing_dev_res_addr.bus); |
| } |
| |
| error_index = ipr_get_error(ioasc); |
| |
| if (!ipr_error_table[error_index].log_hcam) |
| return; |
| |
| ipr_hcam_err(hostrcb, "%s\n", ipr_error_table[error_index].error); |
| |
| /* Set indication we have logged an error */ |
| ioa_cfg->errors_logged++; |
| |
| if (ioa_cfg->log_level < ipr_error_table[error_index].log_hcam) |
| return; |
| if (be32_to_cpu(hostrcb->hcam.length) > sizeof(hostrcb->hcam.u.raw)) |
| hostrcb->hcam.length = cpu_to_be32(sizeof(hostrcb->hcam.u.raw)); |
| |
| switch (hostrcb->hcam.overlay_id) { |
| case IPR_HOST_RCB_OVERLAY_ID_2: |
| ipr_log_cache_error(ioa_cfg, hostrcb); |
| break; |
| case IPR_HOST_RCB_OVERLAY_ID_3: |
| ipr_log_config_error(ioa_cfg, hostrcb); |
| break; |
| case IPR_HOST_RCB_OVERLAY_ID_4: |
| case IPR_HOST_RCB_OVERLAY_ID_6: |
| ipr_log_array_error(ioa_cfg, hostrcb); |
| break; |
| case IPR_HOST_RCB_OVERLAY_ID_7: |
| ipr_log_dual_ioa_error(ioa_cfg, hostrcb); |
| break; |
| case IPR_HOST_RCB_OVERLAY_ID_12: |
| ipr_log_enhanced_cache_error(ioa_cfg, hostrcb); |
| break; |
| case IPR_HOST_RCB_OVERLAY_ID_13: |
| ipr_log_enhanced_config_error(ioa_cfg, hostrcb); |
| break; |
| case IPR_HOST_RCB_OVERLAY_ID_14: |
| case IPR_HOST_RCB_OVERLAY_ID_16: |
| ipr_log_enhanced_array_error(ioa_cfg, hostrcb); |
| break; |
| case IPR_HOST_RCB_OVERLAY_ID_17: |
| ipr_log_enhanced_dual_ioa_error(ioa_cfg, hostrcb); |
| break; |
| case IPR_HOST_RCB_OVERLAY_ID_20: |
| ipr_log_fabric_error(ioa_cfg, hostrcb); |
| break; |
| case IPR_HOST_RCB_OVERLAY_ID_1: |
| case IPR_HOST_RCB_OVERLAY_ID_DEFAULT: |
| default: |
| ipr_log_generic_error(ioa_cfg, hostrcb); |
| break; |
| } |
| } |
| |
| /** |
| * ipr_process_error - Op done function for an adapter error log. |
| * @ipr_cmd: ipr command struct |
| * |
| * This function is the op done function for an error log host |
| * controlled async from the adapter. It will log the error and |
| * send the HCAM back to the adapter. |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_process_error(struct ipr_cmnd *ipr_cmd) |
| { |
| struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; |
| struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb; |
| u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc); |
| u32 fd_ioasc = be32_to_cpu(hostrcb->hcam.u.error.failing_dev_ioasc); |
| |
| list_del(&hostrcb->queue); |
| list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q); |
| |
| if (!ioasc) { |
| ipr_handle_log_data(ioa_cfg, hostrcb); |
| if (fd_ioasc == IPR_IOASC_NR_IOA_RESET_REQUIRED) |
| ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_ABBREV); |
| } else if (ioasc != IPR_IOASC_IOA_WAS_RESET) { |
| dev_err(&ioa_cfg->pdev->dev, |
| "Host RCB failed with IOASC: 0x%08X\n", ioasc); |
| } |
| |
| ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_LOG_DATA, hostrcb); |
| } |
| |
| /** |
| * ipr_timeout - An internally generated op has timed out. |
| * @ipr_cmd: ipr command struct |
| * |
| * This function blocks host requests and initiates an |
| * adapter reset. |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_timeout(struct ipr_cmnd *ipr_cmd) |
| { |
| unsigned long lock_flags = 0; |
| struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; |
| |
| ENTER; |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| |
| ioa_cfg->errors_logged++; |
| dev_err(&ioa_cfg->pdev->dev, |
| "Adapter being reset due to command timeout.\n"); |
| |
| if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) |
| ioa_cfg->sdt_state = GET_DUMP; |
| |
| if (!ioa_cfg->in_reset_reload || ioa_cfg->reset_cmd == ipr_cmd) |
| ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); |
| |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| LEAVE; |
| } |
| |
| /** |
| * ipr_oper_timeout - Adapter timed out transitioning to operational |
| * @ipr_cmd: ipr command struct |
| * |
| * This function blocks host requests and initiates an |
| * adapter reset. |
| * |
| * Return value: |
| * none |
| **/ |
| static void ipr_oper_timeout(struct ipr_cmnd *ipr_cmd) |
| { |
| unsigned long lock_flags = 0; |
| struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; |
| |
| ENTER; |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| |
| ioa_cfg->errors_logged++; |
| dev_err(&ioa_cfg->pdev->dev, |
| "Adapter timed out transitioning to operational.\n"); |
| |
| if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) |
| ioa_cfg->sdt_state = GET_DUMP; |
| |
| if (!ioa_cfg->in_reset_reload || ioa_cfg->reset_cmd == ipr_cmd) { |
| if (ipr_fastfail) |
| ioa_cfg->reset_retries += IPR_NUM_RESET_RELOAD_RETRIES; |
| ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); |
| } |
| |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| LEAVE; |
| } |
| |
| /** |
| * ipr_reset_reload - Reset/Reload the IOA |
| * @ioa_cfg: ioa config struct |
| * @shutdown_type: shutdown type |
| * |
| * This function resets the adapter and re-initializes it. |
| * This function assumes that all new host commands have been stopped. |
| * Return value: |
| * SUCCESS / FAILED |
| **/ |
| static int ipr_reset_reload(struct ipr_ioa_cfg *ioa_cfg, |
| enum ipr_shutdown_type shutdown_type) |
| { |
| if (!ioa_cfg->in_reset_reload) |
| ipr_initiate_ioa_reset(ioa_cfg, shutdown_type); |
| |
| spin_unlock_irq(ioa_cfg->host->host_lock); |
| wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); |
| spin_lock_irq(ioa_cfg->host->host_lock); |
| |
| /* If we got hit with a host reset while we were already resetting |
| the adapter for some reason, and the reset failed. */ |
| if (ioa_cfg->ioa_is_dead) { |
| ipr_trace; |
| return FAILED; |
| } |
| |
| return SUCCESS; |
| } |
| |
| /** |
| * ipr_find_ses_entry - Find matching SES in SES table |
| * @res: resource entry struct of SES |
| * |
| * Return value: |
| * pointer to SES table entry / NULL on failure |
| **/ |
| static const struct ipr_ses_table_entry * |
| ipr_find_ses_entry(struct ipr_resource_entry *res) |
| { |
| int i, j, matches; |
| const struct ipr_ses_table_entry *ste = ipr_ses_table; |
| |
| for (i = 0; i < ARRAY_SIZE(ipr_ses_table); i++, ste++) { |
| for (j = 0, matches = 0; j < IPR_PROD_ID_LEN; j++) { |
| if (ste->compare_product_id_byte[j] == 'X') { |
| if (res->cfgte.std_inq_data.vpids.product_id[j] == ste->product_id[j]) |
| matches++; |
| else |
| break; |
| } else |
| matches++; |
| } |
| |
| if (matches == IPR_PROD_ID_LEN) |
| return ste; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * ipr_get_max_scsi_speed - Determine max SCSI speed for a given bus |
| * @ioa_cfg: ioa config struct |
| * @bus: SCSI bus |
| * @bus_width: bus width |
| * |
| * Return value: |
| * SCSI bus speed in units of 100KHz, 1600 is 160 MHz |
| * For a 2-byte wide SCSI bus, the maximum transfer speed is |
| * twice the maximum transfer rate (e.g. for a wide enabled bus, |
| * max 160MHz = max 320MB/sec). |
| **/ |
| static u32 ipr_get_max_scsi_speed(struct ipr_ioa_cfg *ioa_cfg, u8 bus, u8 bus_width) |
| { |
| struct ipr_resource_entry *res; |
| const struct ipr_ses_table_entry *ste; |
| u32 max_xfer_rate = IPR_MAX_SCSI_RATE(bus_width); |
| |
| /* Loop through each config table entry in the config table buffer */ |
| list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { |
| if (!(IPR_IS_SES_DEVICE(res->cfgte.std_inq_data))) |
| continue; |
| |
| if (bus != res->cfgte.res_addr.bus) |
| continue; |
| |
| if (!(ste = ipr_find_ses_entry(res))) |
| continue; |
| |
| max_xfer_rate = (ste->max_bus_speed_limit * 10) / (bus_width / 8); |
| } |
| |
| return max_xfer_rate; |
| } |
| |
| /** |
| * ipr_wait_iodbg_ack - Wait for an IODEBUG ACK from the IOA |
| * @ioa_cfg: ioa config struct |
| * @max_delay: max delay in micro-seconds to wait |
| * |
| * Waits for an IODEBUG ACK from the IOA, doing busy looping. |
| * |
| * Return value: |
| * 0 on success / other on failure |
| **/ |
| static int ipr_wait_iodbg_ack(struct ipr_ioa_cfg *ioa_cfg, int max_delay) |
| { |
| volatile u32 pcii_reg; |
| int delay = 1; |
| |
| /* Read interrupt reg until IOA signals IO Debug Acknowledge */ |
| while (delay < max_delay) { |
| pcii_reg = readl(ioa_cfg->regs.sense_interrupt_reg); |
| |
| if (pcii_reg & IPR_PCII_IO_DEBUG_ACKNOWLEDGE) |
| return 0; |
| |
| /* udelay cannot be used if delay is more than a few milliseconds */ |
| if ((delay / 1000) > MAX_UDELAY_MS) |
| mdelay(delay / 1000); |
| else |
| udelay(delay); |
| |
| delay += delay; |
| } |
| return -EIO; |
| } |
| |
| /** |
| * ipr_get_ldump_data_section - Dump IOA memory |
| * @ioa_cfg: ioa config struct |
| * @start_addr: adapter address to dump |
| * @dest: destination kernel buffer |
| * @length_in_words: length to dump in 4 byte words |
| * |
| * Return value: |
| * 0 on success / -EIO on failure |
| **/ |
| static int ipr_get_ldump_data_section(struct ipr_ioa_cfg *ioa_cfg, |
| u32 start_addr, |
| __be32 *dest, u32 length_in_words) |
| { |
| volatile u32 temp_pcii_reg; |
| int i, delay = 0; |
| |
| /* Write IOA interrupt reg starting LDUMP state */ |
| writel((IPR_UPROCI_RESET_ALERT | IPR_UPROCI_IO_DEBUG_ALERT), |
| ioa_cfg->regs.set_uproc_interrupt_reg); |
| |
| /* Wait for IO debug acknowledge */ |
| if (ipr_wait_iodbg_ack(ioa_cfg, |
| IPR_LDUMP_MAX_LONG_ACK_DELAY_IN_USEC)) { |
| dev_err(&ioa_cfg->pdev->dev, |
| "IOA dump long data transfer timeout\n"); |
| return -EIO; |
| } |
| |
| /* Signal LDUMP interlocked - clear IO debug ack */ |
| writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, |
| ioa_cfg->regs.clr_interrupt_reg); |
| |
| /* Write Mailbox with starting address */ |
| writel(start_addr, ioa_cfg->ioa_mailbox); |
| |
| /* Signal address valid - clear IOA Reset alert */ |
| writel(IPR_UPROCI_RESET_ALERT, |
| ioa_cfg->regs.clr_uproc_interrupt_reg); |
| |
| for (i = 0; i < length_in_words; i++) { |
| /* Wait for IO debug acknowledge */ |
| if (ipr_wait_iodbg_ack(ioa_cfg, |
| IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC)) { |
| dev_err(&ioa_cfg->pdev->dev, |
| "IOA dump short data transfer timeout\n"); |
| return -EIO; |
| } |
| |
| /* Read data from mailbox and increment destination pointer */ |
| *dest = cpu_to_be32(readl(ioa_cfg->ioa_mailbox)); |
| dest++; |
| |
| /* For all but the last word of data, signal data received */ |
| if (i < (length_in_words - 1)) { |
| /* Signal dump data received - Clear IO debug Ack */ |
| writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, |
| ioa_cfg->regs.clr_interrupt_reg); |
| } |
| } |
| |
| /* Signal end of block transfer. Set reset alert then clear IO debug ack */ |
| writel(IPR_UPROCI_RESET_ALERT, |
| ioa_cfg->regs.set_uproc_interrupt_reg); |
| |
| writel(IPR_UPROCI_IO_DEBUG_ALERT, |
| ioa_cfg->regs.clr_uproc_interrupt_reg); |
| |
| /* Signal dump data received - Clear IO debug Ack */ |
| writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, |
| ioa_cfg->regs.clr_interrupt_reg); |
| |
| /* Wait for IOA to signal LDUMP exit - IOA reset alert will be cleared */ |
| while (delay < IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC) { |
| temp_pcii_reg = |
| readl(ioa_cfg->regs.sense_uproc_interrupt_reg); |
| |
| if (!(temp_pcii_reg & IPR_UPROCI_RESET_ALERT)) |
| return 0; |
| |
| udelay(10); |
| delay += 10; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_SCSI_IPR_DUMP |
| /** |
| * ipr_sdt_copy - Copy Smart Dump Table to kernel buffer |
| * @ioa_cfg: ioa config struct |
| * @pci_address: adapter address |
| * @length: length of data to copy |
| * |
| * Copy data from PCI adapter to kernel buffer. |
| * Note: length MUST be a 4 byte multiple |
| * Return value: |
| * 0 on success / other on failure |
| **/ |
| static int ipr_sdt_copy(struct ipr_ioa_cfg *ioa_cfg, |
| unsigned long pci_address, u32 length) |
| { |
| int bytes_copied = 0; |
| int cur_len, rc, rem_len, rem_page_len; |
| __be32 *page; |
| unsigned long lock_flags = 0; |
| struct ipr_ioa_dump *ioa_dump = &ioa_cfg->dump->ioa_dump; |
| |
| while (bytes_copied < length && |
| (ioa_dump->hdr.len + bytes_copied) < IPR_MAX_IOA_DUMP_SIZE) { |
| if (ioa_dump->page_offset >= PAGE_SIZE || |
| ioa_dump->page_offset == 0) { |
| page = (__be32 *)__get_free_page(GFP_ATOMIC); |
| |
| if (!page) { |
| ipr_trace; |
| return bytes_copied; |
| } |
| |
| ioa_dump->page_offset = 0; |
| ioa_dump->ioa_data[ioa_dump->next_page_index] = page; |
| ioa_dump->next_page_index++; |
| } else |
| page = ioa_dump->ioa_data[ioa_dump->next_page_index - 1]; |
| |
| rem_len = length - bytes_copied; |
| rem_page_len = PAGE_SIZE - ioa_dump->page_offset; |
| cur_len = min(rem_len, rem_page_len); |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| if (ioa_cfg->sdt_state == ABORT_DUMP) { |
| rc = -EIO; |
| } else { |
| rc = ipr_get_ldump_data_section(ioa_cfg, |
| pci_address + bytes_copied, |
| &page[ioa_dump->page_offset / 4], |
| (cur_len / sizeof(u32))); |
| } |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| |
| if (!rc) { |
| ioa_dump->page_offset += cur_len; |
| bytes_copied += cur_len; |
| } else { |
| ipr_trace; |
| break; |
| } |
| schedule(); |
| } |
| |
| return bytes_copied; |
| } |
| |
| /** |
| * ipr_init_dump_entry_hdr - Initialize a dump entry header. |
| * @hdr: dump entry header struct |
| * |
| * Return value: |
| * nothing |
| **/ |
| static void ipr_init_dump_entry_hdr(struct ipr_dump_entry_header *hdr) |
| { |
| hdr->eye_catcher = IPR_DUMP_EYE_CATCHER; |
| hdr->num_elems = 1; |
| hdr->offset = sizeof(*hdr); |
| hdr->status = IPR_DUMP_STATUS_SUCCESS; |
| } |
| |
| /** |
| * ipr_dump_ioa_type_data - Fill in the adapter type in the dump. |
| * @ioa_cfg: ioa config struct |
| * @driver_dump: driver dump struct |
| * |
| * Return value: |
| * nothing |
| **/ |
| static void ipr_dump_ioa_type_data(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_driver_dump *driver_dump) |
| { |
| struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data; |
| |
| ipr_init_dump_entry_hdr(&driver_dump->ioa_type_entry.hdr); |
| driver_dump->ioa_type_entry.hdr.len = |
| sizeof(struct ipr_dump_ioa_type_entry) - |
| sizeof(struct ipr_dump_entry_header); |
| driver_dump->ioa_type_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY; |
| driver_dump->ioa_type_entry.hdr.id = IPR_DUMP_DRIVER_TYPE_ID; |
| driver_dump->ioa_type_entry.type = ioa_cfg->type; |
| driver_dump->ioa_type_entry.fw_version = (ucode_vpd->major_release << 24) | |
| (ucode_vpd->card_type << 16) | (ucode_vpd->minor_release[0] << 8) | |
| ucode_vpd->minor_release[1]; |
| driver_dump->hdr.num_entries++; |
| } |
| |
| /** |
| * ipr_dump_version_data - Fill in the driver version in the dump. |
| * @ioa_cfg: ioa config struct |
| * @driver_dump: driver dump struct |
| * |
| * Return value: |
| * nothing |
| **/ |
| static void ipr_dump_version_data(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_driver_dump *driver_dump) |
| { |
| ipr_init_dump_entry_hdr(&driver_dump->version_entry.hdr); |
| driver_dump->version_entry.hdr.len = |
| sizeof(struct ipr_dump_version_entry) - |
| sizeof(struct ipr_dump_entry_header); |
| driver_dump->version_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_ASCII; |
| driver_dump->version_entry.hdr.id = IPR_DUMP_DRIVER_VERSION_ID; |
| strcpy(driver_dump->version_entry.version, IPR_DRIVER_VERSION); |
| driver_dump->hdr.num_entries++; |
| } |
| |
| /** |
| * ipr_dump_trace_data - Fill in the IOA trace in the dump. |
| * @ioa_cfg: ioa config struct |
| * @driver_dump: driver dump struct |
| * |
| * Return value: |
| * nothing |
| **/ |
| static void ipr_dump_trace_data(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_driver_dump *driver_dump) |
| { |
| ipr_init_dump_entry_hdr(&driver_dump->trace_entry.hdr); |
| driver_dump->trace_entry.hdr.len = |
| sizeof(struct ipr_dump_trace_entry) - |
| sizeof(struct ipr_dump_entry_header); |
| driver_dump->trace_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY; |
| driver_dump->trace_entry.hdr.id = IPR_DUMP_TRACE_ID; |
| memcpy(driver_dump->trace_entry.trace, ioa_cfg->trace, IPR_TRACE_SIZE); |
| driver_dump->hdr.num_entries++; |
| } |
| |
| /** |
| * ipr_dump_location_data - Fill in the IOA location in the dump. |
| * @ioa_cfg: ioa config struct |
| * @driver_dump: driver dump struct |
| * |
| * Return value: |
| * nothing |
| **/ |
| static void ipr_dump_location_data(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_driver_dump *driver_dump) |
| { |
| ipr_init_dump_entry_hdr(&driver_dump->location_entry.hdr); |
| driver_dump->location_entry.hdr.len = |
| sizeof(struct ipr_dump_location_entry) - |
| sizeof(struct ipr_dump_entry_header); |
| driver_dump->location_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_ASCII; |
| driver_dump->location_entry.hdr.id = IPR_DUMP_LOCATION_ID; |
| strcpy(driver_dump->location_entry.location, dev_name(&ioa_cfg->pdev->dev)); |
| driver_dump->hdr.num_entries++; |
| } |
| |
| /** |
| * ipr_get_ioa_dump - Perform a dump of the driver and adapter. |
| * @ioa_cfg: ioa config struct |
| * @dump: dump struct |
| * |
| * Return value: |
| * nothing |
| **/ |
| static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump) |
| { |
| unsigned long start_addr, sdt_word; |
| unsigned long lock_flags = 0; |
| struct ipr_driver_dump *driver_dump = &dump->driver_dump; |
| struct ipr_ioa_dump *ioa_dump = &dump->ioa_dump; |
| u32 num_entries, start_off, end_off; |
| u32 bytes_to_copy, bytes_copied, rc; |
| struct ipr_sdt *sdt; |
| int i; |
| |
| ENTER; |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| |
| if (ioa_cfg->sdt_state != GET_DUMP) { |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| return; |
| } |
| |
| start_addr = readl(ioa_cfg->ioa_mailbox); |
| |
| if (!ipr_sdt_is_fmt2(start_addr)) { |
| dev_err(&ioa_cfg->pdev->dev, |
| "Invalid dump table format: %lx\n", start_addr); |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| return; |
| } |
| |
| dev_err(&ioa_cfg->pdev->dev, "Dump of IOA initiated\n"); |
| |
| driver_dump->hdr.eye_catcher = IPR_DUMP_EYE_CATCHER; |
| |
| /* Initialize the overall dump header */ |
| driver_dump->hdr.len = sizeof(struct ipr_driver_dump); |
| driver_dump->hdr.num_entries = 1; |
| driver_dump->hdr.first_entry_offset = sizeof(struct ipr_dump_header); |
| driver_dump->hdr.status = IPR_DUMP_STATUS_SUCCESS; |
| driver_dump->hdr.os = IPR_DUMP_OS_LINUX; |
| driver_dump->hdr.driver_name = IPR_DUMP_DRIVER_NAME; |
| |
| ipr_dump_version_data(ioa_cfg, driver_dump); |
| ipr_dump_location_data(ioa_cfg, driver_dump); |
| ipr_dump_ioa_type_data(ioa_cfg, driver_dump); |
| ipr_dump_trace_data(ioa_cfg, driver_dump); |
| |
| /* Update dump_header */ |
| driver_dump->hdr.len += sizeof(struct ipr_dump_entry_header); |
| |
| /* IOA Dump entry */ |
| ipr_init_dump_entry_hdr(&ioa_dump->hdr); |
| ioa_dump->format = IPR_SDT_FMT2; |
| ioa_dump->hdr.len = 0; |
| ioa_dump->hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY; |
| ioa_dump->hdr.id = IPR_DUMP_IOA_DUMP_ID; |
| |
| /* First entries in sdt are actually a list of dump addresses and |
| lengths to gather the real dump data. sdt represents the pointer |
| to the ioa generated dump table. Dump data will be extracted based |
| on entries in this table */ |
| sdt = &ioa_dump->sdt; |
| |
| rc = ipr_get_ldump_data_section(ioa_cfg, start_addr, (__be32 *)sdt, |
| sizeof(struct ipr_sdt) / sizeof(__be32)); |
| |
| /* Smart Dump table is ready to use and the first entry is valid */ |
| if (rc || (be32_to_cpu(sdt->hdr.state) != IPR_FMT2_SDT_READY_TO_USE)) { |
| dev_err(&ioa_cfg->pdev->dev, |
| "Dump of IOA failed. Dump table not valid: %d, %X.\n", |
| rc, be32_to_cpu(sdt->hdr.state)); |
| driver_dump->hdr.status = IPR_DUMP_STATUS_FAILED; |
| ioa_cfg->sdt_state = DUMP_OBTAINED; |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| return; |
| } |
| |
| num_entries = be32_to_cpu(sdt->hdr.num_entries_used); |
| |
| if (num_entries > IPR_NUM_SDT_ENTRIES) |
| num_entries = IPR_NUM_SDT_ENTRIES; |
| |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| |
| for (i = 0; i < num_entries; i++) { |
| if (ioa_dump->hdr.len > IPR_MAX_IOA_DUMP_SIZE) { |
| driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS; |
| break; |
| } |
| |
| if (sdt->entry[i].flags & IPR_SDT_VALID_ENTRY) { |
| sdt_word = be32_to_cpu(sdt->entry[i].bar_str_offset); |
| start_off = sdt_word & IPR_FMT2_MBX_ADDR_MASK; |
| end_off = be32_to_cpu(sdt->entry[i].end_offset); |
| |
| if (ipr_sdt_is_fmt2(sdt_word) && sdt_word) { |
| bytes_to_copy = end_off - start_off; |
| if (bytes_to_copy > IPR_MAX_IOA_DUMP_SIZE) { |
| sdt->entry[i].flags &= ~IPR_SDT_VALID_ENTRY; |
| continue; |
| } |
| |
| /* Copy data from adapter to driver buffers */ |
| bytes_copied = ipr_sdt_copy(ioa_cfg, sdt_word, |
| bytes_to_copy); |
| |
| ioa_dump->hdr.len += bytes_copied; |
| |
| if (bytes_copied != bytes_to_copy) { |
| driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS; |
| break; |
| } |
| } |
| } |
| } |
| |
| dev_err(&ioa_cfg->pdev->dev, "Dump of IOA completed.\n"); |
| |
| /* Update dump_header */ |
| driver_dump->hdr.len += ioa_dump->hdr.len; |
| wmb(); |
| ioa_cfg->sdt_state = DUMP_OBTAINED; |
| LEAVE; |
| } |
| |
| #else |
| #define ipr_get_ioa_dump(ioa_cfg, dump) do { } while(0) |
| #endif |
| |
| /** |
| * ipr_release_dump - Free adapter dump memory |
| * @kref: kref struct |
| * |
| * Return value: |
| * nothing |
| **/ |
| static void ipr_release_dump(struct kref *kref) |
| { |
| struct ipr_dump *dump = container_of(kref,struct ipr_dump,kref); |
| struct ipr_ioa_cfg *ioa_cfg = dump->ioa_cfg; |
| unsigned long lock_flags = 0; |
| int i; |
| |
| ENTER; |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| ioa_cfg->dump = NULL; |
| ioa_cfg->sdt_state = INACTIVE; |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| |
| for (i = 0; i < dump->ioa_dump.next_page_index; i++) |
| free_page((unsigned long) dump->ioa_dump.ioa_data[i]); |
| |
| kfree(dump); |
| LEAVE; |
| } |
| |
| /** |
| * ipr_worker_thread - Worker thread |
| * @work: ioa config struct |
| * |
| * Called at task level from a work thread. This function takes care |
| * of adding and removing device from the mid-layer as configuration |
| * changes are detected by the adapter. |
| * |
| * Return value: |
| * nothing |
| **/ |
| static void ipr_worker_thread(struct work_struct *work) |
| { |
| unsigned long lock_flags; |
| struct ipr_resource_entry *res; |
| struct scsi_device *sdev; |
| struct ipr_dump *dump; |
| struct ipr_ioa_cfg *ioa_cfg = |
| container_of(work, struct ipr_ioa_cfg, work_q); |
| u8 bus, target, lun; |
| int did_work; |
| |
| ENTER; |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| |
| if (ioa_cfg->sdt_state == GET_DUMP) { |
| dump = ioa_cfg->dump; |
| if (!dump) { |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| return; |
| } |
| kref_get(&dump->kref); |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| ipr_get_ioa_dump(ioa_cfg, dump); |
| kref_put(&dump->kref, ipr_release_dump); |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| if (ioa_cfg->sdt_state == DUMP_OBTAINED) |
| ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| return; |
| } |
| |
| restart: |
| do { |
| did_work = 0; |
| if (!ioa_cfg->allow_cmds || !ioa_cfg->allow_ml_add_del) { |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| return; |
| } |
| |
| list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { |
| if (res->del_from_ml && res->sdev) { |
| did_work = 1; |
| sdev = res->sdev; |
| if (!scsi_device_get(sdev)) { |
| list_move_tail(&res->queue, &ioa_cfg->free_res_q); |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| scsi_remove_device(sdev); |
| scsi_device_put(sdev); |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| } |
| break; |
| } |
| } |
| } while(did_work); |
| |
| list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { |
| if (res->add_to_ml) { |
| bus = res->cfgte.res_addr.bus; |
| target = res->cfgte.res_addr.target; |
| lun = res->cfgte.res_addr.lun; |
| res->add_to_ml = 0; |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| scsi_add_device(ioa_cfg->host, bus, target, lun); |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| goto restart; |
| } |
| } |
| |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| kobject_uevent(&ioa_cfg->host->shost_dev.kobj, KOBJ_CHANGE); |
| LEAVE; |
| } |
| |
| #ifdef CONFIG_SCSI_IPR_TRACE |
| /** |
| * ipr_read_trace - Dump the adapter trace |
| * @kobj: kobject struct |
| * @bin_attr: bin_attribute struct |
| * @buf: buffer |
| * @off: offset |
| * @count: buffer size |
| * |
| * Return value: |
| * number of bytes printed to buffer |
| **/ |
| static ssize_t ipr_read_trace(struct kobject *kobj, |
| struct bin_attribute *bin_attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct device *dev = container_of(kobj, struct device, kobj); |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; |
| unsigned long lock_flags = 0; |
| ssize_t ret; |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| ret = memory_read_from_buffer(buf, count, &off, ioa_cfg->trace, |
| IPR_TRACE_SIZE); |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| |
| return ret; |
| } |
| |
| static struct bin_attribute ipr_trace_attr = { |
| .attr = { |
| .name = "trace", |
| .mode = S_IRUGO, |
| }, |
| .size = 0, |
| .read = ipr_read_trace, |
| }; |
| #endif |
| |
| static const struct { |
| enum ipr_cache_state state; |
| char *name; |
| } cache_state [] = { |
| { CACHE_NONE, "none" }, |
| { CACHE_DISABLED, "disabled" }, |
| { CACHE_ENABLED, "enabled" } |
| }; |
| |
| /** |
| * ipr_show_write_caching - Show the write caching attribute |
| * @dev: device struct |
| * @buf: buffer |
| * |
| * Return value: |
| * number of bytes printed to buffer |
| **/ |
| static ssize_t ipr_show_write_caching(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; |
| unsigned long lock_flags = 0; |
| int i, len = 0; |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| for (i = 0; i < ARRAY_SIZE(cache_state); i++) { |
| if (cache_state[i].state == ioa_cfg->cache_state) { |
| len = snprintf(buf, PAGE_SIZE, "%s\n", cache_state[i].name); |
| break; |
| } |
| } |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| return len; |
| } |
| |
| |
| /** |
| * ipr_store_write_caching - Enable/disable adapter write cache |
| * @dev: device struct |
| * @buf: buffer |
| * @count: buffer size |
| * |
| * This function will enable/disable adapter write cache. |
| * |
| * Return value: |
| * count on success / other on failure |
| **/ |
| static ssize_t ipr_store_write_caching(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; |
| unsigned long lock_flags = 0; |
| enum ipr_cache_state new_state = CACHE_INVALID; |
| int i; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| if (ioa_cfg->cache_state == CACHE_NONE) |
| return -EINVAL; |
| |
| for (i = 0; i < ARRAY_SIZE(cache_state); i++) { |
| if (!strncmp(cache_state[i].name, buf, strlen(cache_state[i].name))) { |
| new_state = cache_state[i].state; |
| break; |
| } |
| } |
| |
| if (new_state != CACHE_DISABLED && new_state != CACHE_ENABLED) |
| return -EINVAL; |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| if (ioa_cfg->cache_state == new_state) { |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| return count; |
| } |
| |
| ioa_cfg->cache_state = new_state; |
| dev_info(&ioa_cfg->pdev->dev, "%s adapter write cache.\n", |
| new_state == CACHE_ENABLED ? "Enabling" : "Disabling"); |
| if (!ioa_cfg->in_reset_reload) |
| ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL); |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); |
| |
| return count; |
| } |
| |
| static struct device_attribute ipr_ioa_cache_attr = { |
| .attr = { |
| .name = "write_cache", |
| .mode = S_IRUGO | S_IWUSR, |
| }, |
| .show = ipr_show_write_caching, |
| .store = ipr_store_write_caching |
| }; |
| |
| /** |
| * ipr_show_fw_version - Show the firmware version |
| * @dev: class device struct |
| * @buf: buffer |
| * |
| * Return value: |
| * number of bytes printed to buffer |
| **/ |
| static ssize_t ipr_show_fw_version(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; |
| struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data; |
| unsigned long lock_flags = 0; |
| int len; |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| len = snprintf(buf, PAGE_SIZE, "%02X%02X%02X%02X\n", |
| ucode_vpd->major_release, ucode_vpd->card_type, |
| ucode_vpd->minor_release[0], |
| ucode_vpd->minor_release[1]); |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| return len; |
| } |
| |
| static struct device_attribute ipr_fw_version_attr = { |
| .attr = { |
| .name = "fw_version", |
| .mode = S_IRUGO, |
| }, |
| .show = ipr_show_fw_version, |
| }; |
| |
| /** |
| * ipr_show_log_level - Show the adapter's error logging level |
| * @dev: class device struct |
| * @buf: buffer |
| * |
| * Return value: |
| * number of bytes printed to buffer |
| **/ |
| static ssize_t ipr_show_log_level(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; |
| unsigned long lock_flags = 0; |
| int len; |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| len = snprintf(buf, PAGE_SIZE, "%d\n", ioa_cfg->log_level); |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| return len; |
| } |
| |
| /** |
| * ipr_store_log_level - Change the adapter's error logging level |
| * @dev: class device struct |
| * @buf: buffer |
| * |
| * Return value: |
| * number of bytes printed to buffer |
| **/ |
| static ssize_t ipr_store_log_level(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; |
| unsigned long lock_flags = 0; |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| ioa_cfg->log_level = simple_strtoul(buf, NULL, 10); |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| return strlen(buf); |
| } |
| |
| static struct device_attribute ipr_log_level_attr = { |
| .attr = { |
| .name = "log_level", |
| .mode = S_IRUGO | S_IWUSR, |
| }, |
| .show = ipr_show_log_level, |
| .store = ipr_store_log_level |
| }; |
| |
| /** |
| * ipr_store_diagnostics - IOA Diagnostics interface |
| * @dev: device struct |
| * @buf: buffer |
| * @count: buffer size |
| * |
| * This function will reset the adapter and wait a reasonable |
| * amount of time for any errors that the adapter might log. |
| * |
| * Return value: |
| * count on success / other on failure |
| **/ |
| static ssize_t ipr_store_diagnostics(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; |
| unsigned long lock_flags = 0; |
| int rc = count; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| while(ioa_cfg->in_reset_reload) { |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| } |
| |
| ioa_cfg->errors_logged = 0; |
| ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL); |
| |
| if (ioa_cfg->in_reset_reload) { |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); |
| |
| /* Wait for a second for any errors to be logged */ |
| msleep(1000); |
| } else { |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| return -EIO; |
| } |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| if (ioa_cfg->in_reset_reload || ioa_cfg->errors_logged) |
| rc = -EIO; |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| |
| return rc; |
| } |
| |
| static struct device_attribute ipr_diagnostics_attr = { |
| .attr = { |
| .name = "run_diagnostics", |
| .mode = S_IWUSR, |
| }, |
| .store = ipr_store_diagnostics |
| }; |
| |
| /** |
| * ipr_show_adapter_state - Show the adapter's state |
| * @class_dev: device struct |
| * @buf: buffer |
| * |
| * Return value: |
| * number of bytes printed to buffer |
| **/ |
| static ssize_t ipr_show_adapter_state(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; |
| unsigned long lock_flags = 0; |
| int len; |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| if (ioa_cfg->ioa_is_dead) |
| len = snprintf(buf, PAGE_SIZE, "offline\n"); |
| else |
| len = snprintf(buf, PAGE_SIZE, "online\n"); |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| return len; |
| } |
| |
| /** |
| * ipr_store_adapter_state - Change adapter state |
| * @dev: device struct |
| * @buf: buffer |
| * @count: buffer size |
| * |
| * This function will change the adapter's state. |
| * |
| * Return value: |
| * count on success / other on failure |
| **/ |
| static ssize_t ipr_store_adapter_state(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; |
| unsigned long lock_flags; |
| int result = count; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| if (ioa_cfg->ioa_is_dead && !strncmp(buf, "online", 6)) { |
| ioa_cfg->ioa_is_dead = 0; |
| ioa_cfg->reset_retries = 0; |
| ioa_cfg->in_ioa_bringdown = 0; |
| ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); |
| } |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); |
| |
| return result; |
| } |
| |
| static struct device_attribute ipr_ioa_state_attr = { |
| .attr = { |
| .name = "online_state", |
| .mode = S_IRUGO | S_IWUSR, |
| }, |
| .show = ipr_show_adapter_state, |
| .store = ipr_store_adapter_state |
| }; |
| |
| /** |
| * ipr_store_reset_adapter - Reset the adapter |
| * @dev: device struct |
| * @buf: buffer |
| * @count: buffer size |
| * |
| * This function will reset the adapter. |
| * |
| * Return value: |
| * count on success / other on failure |
| **/ |
| static ssize_t ipr_store_reset_adapter(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; |
| unsigned long lock_flags; |
| int result = count; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| if (!ioa_cfg->in_reset_reload) |
| ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL); |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); |
| |
| return result; |
| } |
| |
| static struct device_attribute ipr_ioa_reset_attr = { |
| .attr = { |
| .name = "reset_host", |
| .mode = S_IWUSR, |
| }, |
| .store = ipr_store_reset_adapter |
| }; |
| |
| /** |
| * ipr_alloc_ucode_buffer - Allocates a microcode download buffer |
| * @buf_len: buffer length |
| * |
| * Allocates a DMA'able buffer in chunks and assembles a scatter/gather |
| * list to use for microcode download |
| * |
| * Return value: |
| * pointer to sglist / NULL on failure |
| **/ |
| static struct ipr_sglist *ipr_alloc_ucode_buffer(int buf_len) |
| { |
| int sg_size, order, bsize_elem, num_elem, i, j; |
| struct ipr_sglist *sglist; |
| struct scatterlist *scatterlist; |
| struct page *page; |
| |
| /* Get the minimum size per scatter/gather element */ |
| sg_size = buf_len / (IPR_MAX_SGLIST - 1); |
| |
| /* Get the actual size per element */ |
| order = get_order(sg_size); |
| |
| /* Determine the actual number of bytes per element */ |
| bsize_elem = PAGE_SIZE * (1 << order); |
| |
| /* Determine the actual number of sg entries needed */ |
| if (buf_len % bsize_elem) |
| num_elem = (buf_len / bsize_elem) + 1; |
| else |
| num_elem = buf_len / bsize_elem; |
| |
| /* Allocate a scatter/gather list for the DMA */ |
| sglist = kzalloc(sizeof(struct ipr_sglist) + |
| (sizeof(struct scatterlist) * (num_elem - 1)), |
| GFP_KERNEL); |
| |
| if (sglist == NULL) { |
| ipr_trace; |
| return NULL; |
| } |
| |
| scatterlist = sglist->scatterlist; |
| sg_init_table(scatterlist, num_elem); |
| |
| sglist->order = order; |
| sglist->num_sg = num_elem; |
| |
| /* Allocate a bunch of sg elements */ |
| for (i = 0; i < num_elem; i++) { |
| page = alloc_pages(GFP_KERNEL, order); |
| if (!page) { |
| ipr_trace; |
| |
| /* Free up what we already allocated */ |
| for (j = i - 1; j >= 0; j--) |
| __free_pages(sg_page(&scatterlist[j]), order); |
| kfree(sglist); |
| return NULL; |
| } |
| |
| sg_set_page(&scatterlist[i], page, 0, 0); |
| } |
| |
| return sglist; |
| } |
| |
| /** |
| * ipr_free_ucode_buffer - Frees a microcode download buffer |
| * @p_dnld: scatter/gather list pointer |
| * |
| * Free a DMA'able ucode download buffer previously allocated with |
| * ipr_alloc_ucode_buffer |
| * |
| * Return value: |
| * nothing |
| **/ |
| static void ipr_free_ucode_buffer(struct ipr_sglist *sglist) |
| { |
| int i; |
| |
| for (i = 0; i < sglist->num_sg; i++) |
| __free_pages(sg_page(&sglist->scatterlist[i]), sglist->order); |
| |
| kfree(sglist); |
| } |
| |
| /** |
| * ipr_copy_ucode_buffer - Copy user buffer to kernel buffer |
| * @sglist: scatter/gather list pointer |
| * @buffer: buffer pointer |
| * @len: buffer length |
| * |
| * Copy a microcode image from a user buffer into a buffer allocated by |
| * ipr_alloc_ucode_buffer |
| * |
| * Return value: |
| * 0 on success / other on failure |
| **/ |
| static int ipr_copy_ucode_buffer(struct ipr_sglist *sglist, |
| u8 *buffer, u32 len) |
| { |
| int bsize_elem, i, result = 0; |
| struct scatterlist *scatterlist; |
| void *kaddr; |
| |
| /* Determine the actual number of bytes per element */ |
| bsize_elem = PAGE_SIZE * (1 << sglist->order); |
| |
| scatterlist = sglist->scatterlist; |
| |
| for (i = 0; i < (len / bsize_elem); i++, buffer += bsize_elem) { |
| struct page *page = sg_page(&scatterlist[i]); |
| |
| kaddr = kmap(page); |
| memcpy(kaddr, buffer, bsize_elem); |
| kunmap(page); |
| |
| scatterlist[i].length = bsize_elem; |
| |
| if (result != 0) { |
| ipr_trace; |
| return result; |
| } |
| } |
| |
| if (len % bsize_elem) { |
| struct page *page = sg_page(&scatterlist[i]); |
| |
| kaddr = kmap(page); |
| memcpy(kaddr, buffer, len % bsize_elem); |
| kunmap(page); |
| |
| scatterlist[i].length = len % bsize_elem; |
| } |
| |
| sglist->buffer_len = len; |
| return result; |
| } |
| |
| /** |
| * ipr_build_ucode_ioadl - Build a microcode download IOADL |
| * @ipr_cmd: ipr command struct |
| * @sglist: scatter/gather list |
| * |
| * Builds a microcode download IOA data list (IOADL). |
| * |
| **/ |
| static void ipr_build_ucode_ioadl(struct ipr_cmnd *ipr_cmd, |
| struct ipr_sglist *sglist) |
| { |
| struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; |
| struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl; |
| struct scatterlist *scatterlist = sglist->scatterlist; |
| int i; |
| |
| ipr_cmd->dma_use_sg = sglist->num_dma_sg; |
| ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ; |
| ioarcb->write_data_transfer_length = cpu_to_be32(sglist->buffer_len); |
| ioarcb->write_ioadl_len = |
| cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg); |
| |
| for (i = 0; i < ipr_cmd->dma_use_sg; i++) { |
| ioadl[i].flags_and_data_len = |
| cpu_to_be32(IPR_IOADL_FLAGS_WRITE | sg_dma_len(&scatterlist[i])); |
| ioadl[i].address = |
| cpu_to_be32(sg_dma_address(&scatterlist[i])); |
| } |
| |
| ioadl[i-1].flags_and_data_len |= |
| cpu_to_be32(IPR_IOADL_FLAGS_LAST); |
| } |
| |
| /** |
| * ipr_update_ioa_ucode - Update IOA's microcode |
| * @ioa_cfg: ioa config struct |
| * @sglist: scatter/gather list |
| * |
| * Initiate an adapter reset to update the IOA's microcode |
| * |
| * Return value: |
| * 0 on success / -EIO on failure |
| **/ |
| static int ipr_update_ioa_ucode(struct ipr_ioa_cfg *ioa_cfg, |
| struct ipr_sglist *sglist) |
| { |
| unsigned long lock_flags; |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| while(ioa_cfg->in_reset_reload) { |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| } |
| |
| if (ioa_cfg->ucode_sglist) { |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| dev_err(&ioa_cfg->pdev->dev, |
| "Microcode download already in progress\n"); |
| return -EIO; |
| } |
| |
| sglist->num_dma_sg = pci_map_sg(ioa_cfg->pdev, sglist->scatterlist, |
| sglist->num_sg, DMA_TO_DEVICE); |
| |
| if (!sglist->num_dma_sg) { |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| dev_err(&ioa_cfg->pdev->dev, |
| "Failed to map microcode download buffer!\n"); |
| return -EIO; |
| } |
| |
| ioa_cfg->ucode_sglist = sglist; |
| ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL); |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); |
| |
| spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); |
| ioa_cfg->ucode_sglist = NULL; |
| spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); |
| return 0; |
| } |
| |
| /** |
| * ipr_store_update_fw - Update the firmware on the adapter |
| * @class_dev: device struct |
| * @buf: buffer |
| * @count: buffer size |
| * |
| * This function will update the firmware on the adapter. |
| * |
| * Return value: |
| * count on success / other on failure |
| **/ |
| static ssize_t ipr_store_update_fw(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct Scsi_Host *shost = class_to_shost(dev); |
| struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; |
| struct ipr_ucode_image_header *image_hdr; |
| const struct firmware *fw_entry; |
| struct ipr_sglist *sglist; |
| char fname[100]; |
| char *src; |
| int len, result, dnld_size; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| len = snprintf(fname, 99, "%s", buf); |
| fname[len-1] = '\0'; |
| |
| if(request_firmware(&fw_entry, fname, & |