/*
 *************************************************************************
 * Ralink Tech Inc.
 * 5F., No.36, Taiyuan St., Jhubei City,
 * Hsinchu County 302,
 * Taiwan, R.O.C.
 *
 * (c) Copyright 2002-2007, Ralink Technology, Inc.
 *
 * This program is free software; you can redistribute it and/or modify  *
 * it under the terms of the GNU General Public License as published by  *
 * the Free Software Foundation; either version 2 of the License, or     *
 * (at your option) any later version.                                   *
 *                                                                       *
 * This program is distributed in the hope that it will be useful,       *
 * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
 * GNU General Public License for more details.                          *
 *                                                                       *
 * You should have received a copy of the GNU General Public License     *
 * along with this program; if not, write to the                         *
 * Free Software Foundation, Inc.,                                       *
 * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
 *                                                                       *
 *************************************************************************

    Module Name:
    rtmp_def.h

    Abstract:
    Miniport related definition header

    Revision History:
    Who         When          What
    --------    ----------    ----------------------------------------------
    Paul Lin    08-01-2002    created
    John Chang  08-05-2003    add definition for 11g & other drafts
*/
#ifndef __RTMP_DEF_H__
#define __RTMP_DEF_H__

#include "oid.h"

#undef AP_WSC_INCLUDED
#undef STA_WSC_INCLUDED
#undef WSC_INCLUDED


#ifdef CONFIG_STA_SUPPORT
#endif // CONFIG_STA_SUPPORT //

#if defined(AP_WSC_INCLUDED) || defined(STA_WSC_INCLUDED)
#define WSC_INCLUDED
#endif
//
//  Debug information verbosity: lower values indicate higher urgency
//
#define RT_DEBUG_OFF        0
#define RT_DEBUG_ERROR      1
#define RT_DEBUG_WARN       2
#define RT_DEBUG_TRACE      3
#define RT_DEBUG_INFO       4
#define RT_DEBUG_LOUD       5

#define NIC_TAG             ((ULONG)'0682')
#define NIC_DBG_STRING      ("**RT28xx**")

#ifdef SNMP_SUPPORT
// for snmp
// to get manufacturer OUI, kathy, 2008_0220
#define ManufacturerOUI_LEN			3
#define ManufacturerNAME			("Ralink Technology Company.")
#define	ResourceTypeIdName			("Ralink_ID")
#endif


//#define PACKED

#define RALINK_2883_VERSION		((UINT32)0x28830300)
#define RALINK_2880E_VERSION	((UINT32)0x28720200)
#define RALINK_3070_VERSION		((UINT32)0x30700200)

#define MAX_RX_PKT_LEN	1520

//
// Entry number for each DMA descriptor ring
//

#ifdef RTMP_MAC_PCI
#define TX_RING_SIZE            64 //64
#define MGMT_RING_SIZE          128
#define RX_RING_SIZE            128 //64
#define MAX_TX_PROCESS          TX_RING_SIZE //8
#define MAX_DMA_DONE_PROCESS    TX_RING_SIZE
#define MAX_TX_DONE_PROCESS     TX_RING_SIZE //8
#define LOCAL_TXBUF_SIZE        2
#endif // RTMP_MAC_PCI //

#define PCI_VIRT_TO_PHYS(__Addr)	(((UINT32)(__Addr)) & 0x0FFFFFFF)


#ifdef MULTIPLE_CARD_SUPPORT
// MC: Multple Cards
#define MAX_NUM_OF_MULTIPLE_CARD		32
#endif // MULTIPLE_CARD_SUPPORT //

#define MAX_RX_PROCESS          128 //64 //32
#define NUM_OF_LOCAL_TXBUF      2
#define TXD_SIZE                16
#define TXWI_SIZE               16
#define RXD_SIZE		16
#define RXWI_SIZE		16
// TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header
#define TX_DMA_1ST_BUFFER_SIZE  96    // only the 1st physical buffer is pre-allocated
#define MGMT_DMA_BUFFER_SIZE    1536 //2048
#define RX_BUFFER_AGGRESIZE     3840 //3904 //3968 //4096 //2048 //4096
#define RX_BUFFER_NORMSIZE      3840 //3904 //3968 //4096 //2048 //4096
#define TX_BUFFER_NORMSIZE		RX_BUFFER_NORMSIZE
#define MAX_FRAME_SIZE          2346                    // Maximum 802.11 frame size
#define MAX_AGGREGATION_SIZE    3840 //3904 //3968 //4096
#define MAX_NUM_OF_TUPLE_CACHE  2
#define MAX_MCAST_LIST_SIZE     32
#define MAX_LEN_OF_VENDOR_DESC  64
//#define MAX_SIZE_OF_MCAST_PSQ   (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ
#define MAX_SIZE_OF_MCAST_PSQ               32

#define MAX_RX_PROCESS_CNT	(RX_RING_SIZE)


/*
	WMM Note: If memory of your system is not much, please reduce the definition;
	or when you do WMM test, the queue for low priority AC will be full, i.e.
	TX_RING_SIZE + MAX_PACKETS_IN_QUEUE packets for the AC will be buffered in
	WLAN, maybe no any packet buffer can be got in Ethernet driver.

	Sometimes no packet buffer can be got in Ethernet driver, the system will
	send flow control packet to the sender to slow down its sending rate.
	So no WMM can be saw in the air.
*/

/*
	Need to use 64 in vxworks for test case WMM A5-T07
	Two dnlink (10Mbps) from a WMM station to a non-WMM station.
	If use 256, queue is not enough.
	And in rt_main_end.c, clConfig.clNum = RX_RING_SIZE * 3; is changed to
	clConfig.clNum = RX_RING_SIZE * 4;
*/
// TODO: For VxWorks the size is 256. Shall we cahnge the value as 256 for all OS?????
#define MAX_PACKETS_IN_QUEUE				(512) //(512)    // to pass WMM A5-WPAPSK

#define MAX_PACKETS_IN_MCAST_PS_QUEUE		32
#define MAX_PACKETS_IN_PS_QUEUE				128	//32
#define WMM_NUM_OF_AC                       4  /* AC0, AC1, AC2, and AC3 */


#ifdef RTMP_EFUSE_SUPPORT
//2008/09/11:KH add to support efuse<--
#define MAX_EEPROM_BIN_FILE_SIZE				1024
#define EFUSE_BUFFER_PATH						"/tmp/RT30xxEEPROM.bin"
//2008/09/11:KH add to support efuse-->
#endif // RTMP_EFUSE_SUPPORT //

// RxFilter
#define STANORMAL	 0x17f97
#define APNORMAL	 0x15f97
#define PSPXLINK	 0x17f93
//
//  RTMP_ADAPTER flags
//
#define fRTMP_ADAPTER_MAP_REGISTER          0x00000001
#define fRTMP_ADAPTER_INTERRUPT_IN_USE      0x00000002
#define fRTMP_ADAPTER_HARDWARE_ERROR        0x00000004
#define fRTMP_ADAPTER_SCATTER_GATHER        0x00000008
#define fRTMP_ADAPTER_SEND_PACKET_ERROR     0x00000010
#define fRTMP_ADAPTER_MLME_RESET_IN_PROGRESS 0x00000020
#define fRTMP_ADAPTER_HALT_IN_PROGRESS      0x00000040
#define fRTMP_ADAPTER_RESET_IN_PROGRESS     0x00000080
#define fRTMP_ADAPTER_NIC_NOT_EXIST         0x00000100
#define fRTMP_ADAPTER_TX_RING_ALLOCATED     0x00000200
#define fRTMP_ADAPTER_REMOVE_IN_PROGRESS    0x00000400
#define fRTMP_ADAPTER_MIMORATE_INUSED       0x00000800
#define fRTMP_ADAPTER_RX_RING_ALLOCATED     0x00001000
#define fRTMP_ADAPTER_INTERRUPT_ACTIVE      0x00002000
#define fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS  0x00004000
#define	fRTMP_ADAPTER_REASSOC_IN_PROGRESS	0x00008000
#define	fRTMP_ADAPTER_MEDIA_STATE_PENDING	0x00010000
#define	fRTMP_ADAPTER_RADIO_OFF				0x00020000
#define fRTMP_ADAPTER_BULKOUT_RESET			0x00040000
#define	fRTMP_ADAPTER_BULKIN_RESET			0x00080000
#define fRTMP_ADAPTER_RDG_ACTIVE			0x00100000
#define fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE 0x00200000
#define fRTMP_ADAPTER_SCAN_2040				0x04000000
#define	fRTMP_ADAPTER_RADIO_MEASUREMENT		0x08000000

#define fRTMP_ADAPTER_START_UP			0x10000000	//Devive already initialized and enabled Tx/Rx.
#define fRTMP_ADAPTER_MEDIA_STATE_CHANGE    0x20000000
#define fRTMP_ADAPTER_IDLE_RADIO_OFF        0x40000000

// Lock bit for accessing different ring buffers
//#define fRTMP_ADAPTER_TX_RING_BUSY        0x80000000
//#define fRTMP_ADAPTER_MGMT_RING_BUSY      0x40000000
//#define fRTMP_ADAPTER_ATIM_RING_BUSY      0x20000000
//#define fRTMP_ADAPTER_RX_RING_BUSY        0x10000000

// Lock bit for accessing different queue
//#define   fRTMP_ADAPTER_TX_QUEUE_BUSY     0x08000000
//#define   fRTMP_ADAPTER_MGMT_QUEUE_BUSY   0x04000000

//
//  STA operation status flags
//
#define fOP_STATUS_INFRA_ON                 0x00000001
#define fOP_STATUS_ADHOC_ON                 0x00000002
#define fOP_STATUS_BG_PROTECTION_INUSED     0x00000004
#define fOP_STATUS_SHORT_SLOT_INUSED        0x00000008
#define fOP_STATUS_SHORT_PREAMBLE_INUSED    0x00000010
#define fOP_STATUS_RECEIVE_DTIM             0x00000020
//#define fOP_STATUS_TX_RATE_SWITCH_ENABLED   0x00000040
#define fOP_STATUS_MEDIA_STATE_CONNECTED    0x00000080
#define fOP_STATUS_WMM_INUSED               0x00000100
#define fOP_STATUS_AGGREGATION_INUSED       0x00000200
#define fOP_STATUS_DOZE                     0x00000400  // debug purpose
#define fOP_STATUS_PIGGYBACK_INUSED         0x00000800  // piggy-back, and aggregation
#define fOP_STATUS_APSD_INUSED				0x00001000
#define fOP_STATUS_TX_AMSDU_INUSED			0x00002000
#define fOP_STATUS_MAX_RETRY_ENABLED		0x00004000
#define fOP_STATUS_WAKEUP_NOW               0x00008000
#define fOP_STATUS_PCIE_DEVICE       0x00020000

//
//  RTMP_ADAPTER PSFlags : related to advanced power save.
//
// Indicate whether driver can go to sleep mode from now. This flag is useful AFTER link up
#define fRTMP_PS_CAN_GO_SLEEP          0x00000001
// Indicate whether driver has issue a LinkControl command to PCIe L1
#define fRTMP_PS_SET_PCI_CLK_OFF_COMMAND          0x00000002
// Indicate driver should disable kick off hardware to send packets from now.
#define fRTMP_PS_DISABLE_TX         0x00000004
// Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which  doesn't indicate unicate nor multicast packets for me
//. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine.
#define fRTMP_PS_GO_TO_SLEEP_NOW         0x00000008
#define fRTMP_PS_TOGGLE_L1		0x00000010	// Use Toggle L1 mechanism for rt28xx PCIe
#ifdef RT3090
#define WAKE_MCU_CMD				0x31
#define SLEEP_MCU_CMD					0x30
#define RFOFF_MCU_CMD				0x35
#endif // RT3090 //
#ifdef DOT11N_DRAFT3
#define fOP_STATUS_SCAN_2040			    0x00040000
#endif // DOT11N_DRAFT3 //

#define CCKSETPROTECT		0x1
#define OFDMSETPROTECT		0x2
#define MM20SETPROTECT		0x4
#define MM40SETPROTECT		0x8
#define GF20SETPROTECT		0x10
#define GR40SETPROTECT		0x20
#define ALLN_SETPROTECT		(GR40SETPROTECT | GF20SETPROTECT | MM40SETPROTECT | MM20SETPROTECT)

//
//  AP's client table operation status flags
//
#define fCLIENT_STATUS_WMM_CAPABLE          0x00000001  // CLIENT can parse QOS DATA frame
#define fCLIENT_STATUS_AGGREGATION_CAPABLE  0x00000002  // CLIENT can receive Ralink's proprietary TX aggregation frame
#define fCLIENT_STATUS_PIGGYBACK_CAPABLE    0x00000004  // CLIENT support piggy-back
#define fCLIENT_STATUS_AMSDU_INUSED			0x00000008
#define fCLIENT_STATUS_SGI20_CAPABLE		0x00000010
#define fCLIENT_STATUS_SGI40_CAPABLE		0x00000020
#define fCLIENT_STATUS_TxSTBC_CAPABLE		0x00000040
#define fCLIENT_STATUS_RxSTBC_CAPABLE		0x00000080
#define fCLIENT_STATUS_HTC_CAPABLE			0x00000100
#define fCLIENT_STATUS_RDG_CAPABLE			0x00000200
#define fCLIENT_STATUS_MCSFEEDBACK_CAPABLE  0x00000400
#define fCLIENT_STATUS_APSD_CAPABLE         0x00000800  /* UAPSD STATION */

#ifdef DOT11N_DRAFT3
#define fCLIENT_STATUS_BSSCOEXIST_CAPABLE	0x00001000
#endif // DOT11N_DRAFT3 //

#define fCLIENT_STATUS_RALINK_CHIPSET		0x00100000
//
//  STA configuration flags
//
//#define fSTA_CFG_ENABLE_TX_BURST          0x00000001

// 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case
#define HT_NO_PROTECT	0
#define HT_LEGACY_PROTECT	1
#define HT_40_PROTECT	2
#define HT_2040_PROTECT	3
#define HT_RTSCTS_6M	7
//following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE.
#define HT_ATHEROS	8	// rt2860c has problem with atheros chip. we need to turn on RTS/CTS .
#define HT_FORCERTSCTS	9	// Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary.

//
// RX Packet Filter control flags. Apply on pAd->PacketFilter
//
#define fRX_FILTER_ACCEPT_DIRECT            NDIS_PACKET_TYPE_DIRECTED
#define fRX_FILTER_ACCEPT_MULTICAST         NDIS_PACKET_TYPE_MULTICAST
#define fRX_FILTER_ACCEPT_BROADCAST         NDIS_PACKET_TYPE_BROADCAST
#define fRX_FILTER_ACCEPT_ALL_MULTICAST     NDIS_PACKET_TYPE_ALL_MULTICAST
#define fRX_FILTER_ACCEPT_PROMISCUOUS       NDIS_PACKET_TYPE_PROMISCUOUS

//
// Error code section
//
// NDIS_ERROR_CODE_ADAPTER_NOT_FOUND
#define ERRLOG_READ_PCI_SLOT_FAILED     0x00000101L
#define ERRLOG_WRITE_PCI_SLOT_FAILED    0x00000102L
#define ERRLOG_VENDOR_DEVICE_NOMATCH    0x00000103L

// NDIS_ERROR_CODE_ADAPTER_DISABLED
#define ERRLOG_BUS_MASTER_DISABLED      0x00000201L

// NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION
#define ERRLOG_INVALID_SPEED_DUPLEX     0x00000301L
#define ERRLOG_SET_SECONDARY_FAILED     0x00000302L

// NDIS_ERROR_CODE_OUT_OF_RESOURCES
#define ERRLOG_OUT_OF_MEMORY            0x00000401L
#define ERRLOG_OUT_OF_SHARED_MEMORY     0x00000402L
#define ERRLOG_OUT_OF_MAP_REGISTERS     0x00000403L
#define ERRLOG_OUT_OF_BUFFER_POOL       0x00000404L
#define ERRLOG_OUT_OF_NDIS_BUFFER       0x00000405L
#define ERRLOG_OUT_OF_PACKET_POOL       0x00000406L
#define ERRLOG_OUT_OF_NDIS_PACKET       0x00000407L
#define ERRLOG_OUT_OF_LOOKASIDE_MEMORY  0x00000408L

// NDIS_ERROR_CODE_HARDWARE_FAILURE
#define ERRLOG_SELFTEST_FAILED          0x00000501L
#define ERRLOG_INITIALIZE_ADAPTER       0x00000502L
#define ERRLOG_REMOVE_MINIPORT          0x00000503L

// NDIS_ERROR_CODE_RESOURCE_CONFLICT
#define ERRLOG_MAP_IO_SPACE             0x00000601L
#define ERRLOG_QUERY_ADAPTER_RESOURCES  0x00000602L
#define ERRLOG_NO_IO_RESOURCE           0x00000603L
#define ERRLOG_NO_INTERRUPT_RESOURCE    0x00000604L
#define ERRLOG_NO_MEMORY_RESOURCE       0x00000605L


// WDS definition
#define	MAX_WDS_ENTRY               4
#define WDS_PAIRWISE_KEY_OFFSET     60    // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table

#define	WDS_DISABLE_MODE            0
#define	WDS_RESTRICT_MODE           1
#define	WDS_BRIDGE_MODE             2
#define	WDS_REPEATER_MODE           3
#define	WDS_LAZY_MODE               4


#define MAX_MESH_NUM				0

#define MAX_APCLI_NUM				0
#ifdef APCLI_SUPPORT
#undef	MAX_APCLI_NUM
#define MAX_APCLI_NUM				1
#endif // APCLI_SUPPORT //

#define MAX_MBSSID_NUM				1
#ifdef MBSS_SUPPORT
#undef	MAX_MBSSID_NUM
#define MAX_MBSSID_NUM				(8 - MAX_MESH_NUM - MAX_APCLI_NUM)
#endif // MBSS_SUPPORT //

/* sanity check for apidx */
#define MBSS_MR_APIDX_SANITY_CHECK(apidx) \
    { if (apidx > MAX_MBSSID_NUM) { \
          DBGPRINT(RT_DEBUG_ERROR, ("%s> Error! apidx = %d > MAX_MBSSID_NUM!\n", __FUNCTION__, apidx)); \
	  apidx = MAIN_MBSSID; } }

#define VALID_WCID(_wcid)	((_wcid) > 0 && (_wcid) < MAX_LEN_OF_MAC_TABLE )

#define MAIN_MBSSID                 0
#define FIRST_MBSSID                1


#define MAX_BEACON_SIZE				512
// If the MAX_MBSSID_NUM is larger than 6,
// it shall reserve some WCID space(wcid 222~253) for beacon frames.
// -	these wcid 238~253 are reserved for beacon#6(ra6).
// -	these wcid 222~237 are reserved for beacon#7(ra7).
#if defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 8)
#define HW_RESERVED_WCID	222
#elif defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 7)
#define HW_RESERVED_WCID	238
#else
#define HW_RESERVED_WCID	255
#endif

// Then dedicate wcid of DFS and Carrier-Sense.
#define DFS_CTS_WCID		(HW_RESERVED_WCID - 1)
#define CS_CTS_WCID		(HW_RESERVED_WCID - 2)
#define LAST_SPECIFIC_WCID	(HW_RESERVED_WCID - 2)

// If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211.
// If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228.
#define MAX_AVAILABLE_CLIENT_WCID	(LAST_SPECIFIC_WCID - MAX_MBSSID_NUM - 1)

// TX need WCID to find Cipher Key
// these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8.
#define GET_GroupKey_WCID(__wcid, __bssidx) \
	{										\
		__wcid = LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM) + __bssidx;	\
	}

#define IsGroupKeyWCID(__wcid) (((__wcid) < LAST_SPECIFIC_WCID) && ((__wcid) >= (LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM))))


// definition to support multiple BSSID
#define BSS0                            0
#define BSS1                            1
#define BSS2                            2
#define BSS3                            3
#define BSS4                            4
#define BSS5                            5
#define BSS6                            6
#define BSS7                            7


//============================================================
// Length definitions
#define PEER_KEY_NO                     2
#define MAC_ADDR_LEN                    6
#define TIMESTAMP_LEN                   8
#define MAX_LEN_OF_SUPPORTED_RATES      MAX_LENGTH_OF_SUPPORT_RATES // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
#define MAX_NUM_OF_REGULATORY_CLASS		16
#define MAX_LEN_OF_KEY                  32      // 32 octets == 256 bits, Redefine for WPA
#define MAX_NUM_OF_CHANNELS             MAX_NUM_OF_CHS      // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
#define MAX_NUM_OF_11JCHANNELS             20      // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
#define MAX_LEN_OF_SSID                 32
#define CIPHER_TEXT_LEN                 128
#define HASH_TABLE_SIZE                 256
#define MAX_VIE_LEN                     1024   // New for WPA cipher suite variable IE sizes.
#define MAX_SUPPORT_MCS             32
#define MAX_NUM_OF_BBP_LATCH             140
//============================================================
// ASIC WCID Table definition.
//============================================================
#define BSSID_WCID		1	// in infra mode, always put bssid with this WCID
#define MCAST_WCID	0x0
#define BSS0Mcast_WCID	0x0
#define BSS1Mcast_WCID	0xf8
#define BSS2Mcast_WCID	0xf9
#define BSS3Mcast_WCID	0xfa
#define BSS4Mcast_WCID	0xfb
#define BSS5Mcast_WCID	0xfc
#define BSS6Mcast_WCID	0xfd
#define BSS7Mcast_WCID	0xfe
#define RESERVED_WCID		0xff

#define MAX_NUM_OF_ACL_LIST				MAX_NUMBER_OF_ACL

#define MAX_LEN_OF_MAC_TABLE            MAX_NUMBER_OF_MAC // if MAX_MBSSID_NUM is 8, this value can't be larger than 211

#if MAX_LEN_OF_MAC_TABLE>MAX_AVAILABLE_CLIENT_WCID
#error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!
#endif

#define MAX_NUM_OF_WDS_LINK_PERBSSID	            3
#define MAX_NUM_OF_WDS_LINK	            (MAX_NUM_OF_WDS_LINK_PERBSSID*MAX_MBSSID_NUM)
#define MAX_NUM_OF_EVENT                MAX_NUMBER_OF_EVENT
#define WDS_LINK_START_WCID				(MAX_LEN_OF_MAC_TABLE-1)

#define NUM_OF_TID			8
#define MAX_AID_BA                    4
#define MAX_LEN_OF_BA_REC_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)//   (NUM_OF_TID*MAX_AID_BA + 32)	 //Block ACK recipient
#define MAX_LEN_OF_BA_ORI_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)//   (NUM_OF_TID*MAX_AID_BA + 32)   // Block ACK originator
#define MAX_LEN_OF_BSS_TABLE             64
#define MAX_REORDERING_MPDU_NUM			 512

// key related definitions
#define SHARE_KEY_NUM                   4
#define MAX_LEN_OF_SHARE_KEY            16    // byte count
#define MAX_LEN_OF_PEER_KEY             16    // byte count
#define PAIRWISE_KEY_NUM                64    // in MAC ASIC pairwise key table
#define GROUP_KEY_NUM                   4
#define PMK_LEN                         32
#define WDS_PAIRWISE_KEY_OFFSET         60    // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
#define	PMKID_NO                        4     // Number of PMKID saved supported
#define MAX_LEN_OF_MLME_BUFFER          2048

// power status related definitions
#define PWR_ACTIVE                      0
#define PWR_SAVE                        1
#define PWR_MMPS                        2			//MIMO power save
//#define PWR_UNKNOWN                   2

// Auth and Assoc mode related definitions
#define AUTH_MODE_OPEN                  0x00
#define AUTH_MODE_KEY                   0x01
//#define AUTH_MODE_AUTO_SWITCH         0x03
//#define AUTH_MODE_DEAUTH              0x04
//#define AUTH_MODE_UPLAYER             0x05 // reserved for 802.11i use

// BSS Type definitions
#define BSS_ADHOC                       0  // = Ndis802_11IBSS
#define BSS_INFRA                       1  // = Ndis802_11Infrastructure
#define BSS_ANY                         2  // = Ndis802_11AutoUnknown
#define BSS_MONITOR			            3  // = Ndis802_11Monitor


// Reason code definitions
#define REASON_RESERVED                 0
#define REASON_UNSPECIFY                1
#define REASON_NO_LONGER_VALID          2
#define REASON_DEAUTH_STA_LEAVING       3
#define REASON_DISASSOC_INACTIVE        4
#define REASON_DISASSPC_AP_UNABLE       5
#define REASON_CLS2ERR                  6
#define REASON_CLS3ERR                  7
#define REASON_DISASSOC_STA_LEAVING     8
#define REASON_STA_REQ_ASSOC_NOT_AUTH   9
#define REASON_INVALID_IE               13
#define REASON_MIC_FAILURE              14
#define REASON_4_WAY_TIMEOUT            15
#define REASON_GROUP_KEY_HS_TIMEOUT     16
#define REASON_IE_DIFFERENT             17
#define REASON_MCIPHER_NOT_VALID        18
#define REASON_UCIPHER_NOT_VALID        19
#define REASON_AKMP_NOT_VALID           20
#define REASON_UNSUPPORT_RSNE_VER       21
#define REASON_INVALID_RSNE_CAP         22
#define REASON_8021X_AUTH_FAIL          23
#define REASON_CIPHER_SUITE_REJECTED    24
#define REASON_DECLINED                 37

#define REASON_QOS_UNSPECIFY              32
#define REASON_QOS_LACK_BANDWIDTH         33
#define REASON_POOR_CHANNEL_CONDITION     34
#define REASON_QOS_OUTSIDE_TXOP_LIMITION  35
#define REASON_QOS_QSTA_LEAVING_QBSS      36
#define REASON_QOS_UNWANTED_MECHANISM     37
#define REASON_QOS_MECH_SETUP_REQUIRED    38
#define REASON_QOS_REQUEST_TIMEOUT        39
#define REASON_QOS_CIPHER_NOT_SUPPORT     45

// Status code definitions
#define MLME_SUCCESS                    0
#define MLME_UNSPECIFY_FAIL             1
#define MLME_CANNOT_SUPPORT_CAP         10
#define MLME_REASSOC_DENY_ASSOC_EXIST   11
#define MLME_ASSOC_DENY_OUT_SCOPE       12
#define MLME_ALG_NOT_SUPPORT            13
#define MLME_SEQ_NR_OUT_OF_SEQUENCE     14
#define MLME_REJ_CHALLENGE_FAILURE      15
#define MLME_REJ_TIMEOUT                  16
#define MLME_ASSOC_REJ_UNABLE_HANDLE_STA  17
#define MLME_ASSOC_REJ_DATA_RATE          18

#define MLME_ASSOC_REJ_NO_EXT_RATE        22
#define MLME_ASSOC_REJ_NO_EXT_RATE_PBCC   23
#define MLME_ASSOC_REJ_NO_CCK_OFDM        24

#define MLME_QOS_UNSPECIFY                32
#define MLME_REQUEST_DECLINED             37
#define MLME_REQUEST_WITH_INVALID_PARAM   38
#define MLME_INVALID_GROUP_CIPHER	  41
#define MLME_INVALID_PAIRWISE_CIPHER	  42
#define MLME_INVALID_AKMP			  43
#define MLME_DLS_NOT_ALLOW_IN_QBSS        48
#define MLME_DEST_STA_NOT_IN_QBSS         49
#define MLME_DEST_STA_IS_NOT_A_QSTA       50

#define MLME_INVALID_FORMAT             0x51
#define MLME_FAIL_NO_RESOURCE           0x52
#define MLME_STATE_MACHINE_REJECT       0x53
#define MLME_MAC_TABLE_FAIL             0x54

// IE code
#define IE_SSID                         0
#define IE_SUPP_RATES                   1
#define IE_FH_PARM                      2
#define IE_DS_PARM                      3
#define IE_CF_PARM                      4
#define IE_TIM                          5
#define IE_IBSS_PARM                    6
#define IE_COUNTRY                      7     // 802.11d
#define IE_802_11D_REQUEST              10    // 802.11d
#define IE_QBSS_LOAD                    11    // 802.11e d9
#define IE_EDCA_PARAMETER               12    // 802.11e d9
#define IE_TSPEC                        13    // 802.11e d9
#define IE_TCLAS                        14    // 802.11e d9
#define IE_SCHEDULE                     15    // 802.11e d9
#define IE_CHALLENGE_TEXT               16
#define IE_POWER_CONSTRAINT             32    // 802.11h d3.3
#define IE_POWER_CAPABILITY             33    // 802.11h d3.3
#define IE_TPC_REQUEST                  34    // 802.11h d3.3
#define IE_TPC_REPORT                   35    // 802.11h d3.3
#define IE_SUPP_CHANNELS                36    // 802.11h d3.3
#define IE_CHANNEL_SWITCH_ANNOUNCEMENT  37    // 802.11h d3.3
#define IE_MEASUREMENT_REQUEST          38    // 802.11h d3.3
#define IE_MEASUREMENT_REPORT           39    // 802.11h d3.3
#define IE_QUIET                        40    // 802.11h d3.3
#define IE_IBSS_DFS                     41    // 802.11h d3.3
#define IE_ERP                          42    // 802.11g
#define IE_TS_DELAY                     43    // 802.11e d9
#define IE_TCLAS_PROCESSING             44    // 802.11e d9
#define IE_QOS_CAPABILITY               46    // 802.11e d6
#define IE_HT_CAP                       45    // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
#define IE_AP_CHANNEL_REPORT			51    // 802.11k d6
#define IE_HT_CAP2                         52    // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
#define IE_RSN                          48    // 802.11i d3.0
#define IE_WPA2                         48    // WPA2
#define IE_EXT_SUPP_RATES               50    // 802.11g
#define IE_SUPP_REG_CLASS               59    // 802.11y. Supported regulatory classes.
#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT	60	// 802.11n
#define IE_ADD_HT                         61    // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
#define IE_ADD_HT2                        53    // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD


// For 802.11n D3.03
//#define IE_NEW_EXT_CHA_OFFSET             62    // 802.11n d1. New extension channel offset elemet
#define IE_SECONDARY_CH_OFFSET		62	// 802.11n D3.03	Secondary Channel Offset element
#define IE_WAPI							68		// WAPI information element
#define IE_2040_BSS_COEXIST               72    // 802.11n D3.0.3
#define IE_2040_BSS_INTOLERANT_REPORT     73    // 802.11n D3.03
#define IE_OVERLAPBSS_SCAN_PARM           74    // 802.11n D3.03
#define IE_EXT_CAPABILITY                127   // 802.11n D3.03


#define IE_WPA                          221   // WPA
#define IE_VENDOR_SPECIFIC              221   // Wifi WMM (WME)

#define OUI_BROADCOM_HT              51   //
#define OUI_BROADCOM_HTADD              52   //
#define OUI_PREN_HT_CAP              51   //
#define OUI_PREN_ADD_HT              52   //

// CCX information
#define IE_AIRONET_CKIP                 133   // CCX1.0 ID 85H for CKIP
#define IE_AP_TX_POWER                  150   // CCX 2.0 for AP transmit power
#define IE_MEASUREMENT_CAPABILITY       221   // CCX 2.0
#define IE_CCX_V2                       221
#define IE_AIRONET_IPADDRESS            149   // CCX ID 95H for IP Address
#define IE_AIRONET_CCKMREASSOC          156   // CCX ID 9CH for CCKM Reassociation Request element
#define CKIP_NEGOTIATION_LENGTH         30
#define AIRONET_IPADDRESS_LENGTH        10
#define AIRONET_CCKMREASSOC_LENGTH      24

// ========================================================
// MLME state machine definition
// ========================================================

// STA MLME state mahcines
#define ASSOC_STATE_MACHINE             1
#define AUTH_STATE_MACHINE              2
#define AUTH_RSP_STATE_MACHINE          3
#define SYNC_STATE_MACHINE              4
#define MLME_CNTL_STATE_MACHINE         5
#define WPA_PSK_STATE_MACHINE           6
//#define LEAP_STATE_MACHINE              7
#define AIRONET_STATE_MACHINE           8
#define ACTION_STATE_MACHINE           9

// AP MLME state machines
#define AP_ASSOC_STATE_MACHINE          11
#define AP_AUTH_STATE_MACHINE           12
#define AP_SYNC_STATE_MACHINE           14
#define AP_CNTL_STATE_MACHINE           15
#define WSC_STATE_MACHINE            17
#define WSC_UPNP_STATE_MACHINE		    18


#define WPA_STATE_MACHINE			23


#ifdef QOS_DLS_SUPPORT
#define DLS_STATE_MACHINE               26
#endif // QOS_DLS_SUPPORT //

//
// STA's CONTROL/CONNECT state machine: states, events, total function #
//
#define CNTL_IDLE                       0
#define CNTL_WAIT_DISASSOC              1
#define CNTL_WAIT_JOIN                  2
#define CNTL_WAIT_REASSOC               3
#define CNTL_WAIT_START                 4
#define CNTL_WAIT_AUTH                  5
#define CNTL_WAIT_ASSOC                 6
#define CNTL_WAIT_AUTH2                 7
#define CNTL_WAIT_OID_LIST_SCAN         8
#define CNTL_WAIT_OID_DISASSOC          9

#define MT2_ASSOC_CONF                  34
#define MT2_AUTH_CONF                   35
#define MT2_DEAUTH_CONF                 36
#define MT2_DISASSOC_CONF               37
#define MT2_REASSOC_CONF                38
#define MT2_PWR_MGMT_CONF               39
#define MT2_JOIN_CONF                   40
#define MT2_SCAN_CONF                   41
#define MT2_START_CONF                  42
#define MT2_GET_CONF                    43
#define MT2_SET_CONF                    44
#define MT2_RESET_CONF                  45
#define MT2_FT_OTD_CONF					46
#define MT2_MLME_ROAMING_REQ            52

#define CNTL_FUNC_SIZE                  1

//
// STA's ASSOC state machine: states, events, total function #
//
#define ASSOC_IDLE                      0
#define ASSOC_WAIT_RSP                  1
#define REASSOC_WAIT_RSP                2
#define DISASSOC_WAIT_RSP               3
#define MAX_ASSOC_STATE                 4

#define ASSOC_MACHINE_BASE              0
#define MT2_MLME_ASSOC_REQ              0
#define MT2_MLME_REASSOC_REQ            1
#define MT2_MLME_DISASSOC_REQ           2
#define MT2_PEER_DISASSOC_REQ           3
#define MT2_PEER_ASSOC_REQ              4
#define MT2_PEER_ASSOC_RSP              5
#define MT2_PEER_REASSOC_REQ            6
#define MT2_PEER_REASSOC_RSP            7
#define MT2_DISASSOC_TIMEOUT            8
#define MT2_ASSOC_TIMEOUT               9
#define MT2_REASSOC_TIMEOUT             10
#define MAX_ASSOC_MSG                   11

#define ASSOC_FUNC_SIZE                 (MAX_ASSOC_STATE * MAX_ASSOC_MSG)

//
// ACT state machine: states, events, total function #
//
#define ACT_IDLE                      0
#define MAX_ACT_STATE                 1

#define ACT_MACHINE_BASE              0

//Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self.
//Category
#define MT2_PEER_SPECTRUM_CATE              0
#define MT2_PEER_QOS_CATE              1
#define MT2_PEER_DLS_CATE             2
#define MT2_PEER_BA_CATE             3
#define MT2_PEER_PUBLIC_CATE             4
#define MT2_PEER_RM_CATE             5
/* "FT_CATEGORY_BSS_TRANSITION equal to 6" is defined file of "dot11r_ft.h" */
#define MT2_PEER_HT_CATE             7	//	7.4.7
#define MAX_PEER_CATE_MSG                   7


#define MT2_MLME_ADD_BA_CATE             8
#define MT2_MLME_ORI_DELBA_CATE             9
#define MT2_MLME_REC_DELBA_CATE             10
#define MT2_MLME_QOS_CATE              11
#define MT2_MLME_DLS_CATE             12
#define MT2_ACT_INVALID             13

#define MAX_ACT_MSG                   14


//Category field
#define CATEGORY_SPECTRUM		0
#define CATEGORY_QOS			1
#define CATEGORY_DLS			2
#define CATEGORY_BA			3
#define CATEGORY_PUBLIC		4
#define CATEGORY_RM			5
#define CATEGORY_HT			7


// DLS Action frame definition
#define ACTION_DLS_REQUEST			0
#define ACTION_DLS_RESPONSE			1
#define ACTION_DLS_TEARDOWN			2

//Spectrum  Action field value 802.11h 7.4.1
#define SPEC_MRQ	0	// Request
#define SPEC_MRP	1	//Report
#define SPEC_TPCRQ	2
#define SPEC_TPCRP	3
#define SPEC_CHANNEL_SWITCH	4


//BA  Action field value
#define ADDBA_REQ	0
#define ADDBA_RESP	1
#define DELBA   2

//Public's  Action field value in Public Category.  Some in 802.11y and some in 11n
#define ACTION_BSS_2040_COEXIST				0	// 11n
#define ACTION_DSE_ENABLEMENT					1	// 11y D9.0
#define ACTION_DSE_DEENABLEMENT				2	// 11y D9.0
#define ACTION_DSE_REG_LOCATION_ANNOUNCE	3	// 11y D9.0
#define ACTION_EXT_CH_SWITCH_ANNOUNCE		4	// 11y D9.0
#define ACTION_DSE_MEASUREMENT_REQ			5	// 11y D9.0
#define ACTION_DSE_MEASUREMENT_REPORT		6	// 11y D9.0
#define ACTION_MEASUREMENT_PILOT_ACTION		7	// 11y D9.0
#define ACTION_DSE_POWER_CONSTRAINT			8	// 11y D9.0


//HT  Action field value
#define NOTIFY_BW_ACTION				0
#define SMPS_ACTION						1
#define PSMP_ACTION					2
#define SETPCO_ACTION					3
#define MIMO_CHA_MEASURE_ACTION			4
#define MIMO_N_BEACONFORM				5
#define MIMO_BEACONFORM					6
#define ANTENNA_SELECT					7
#define HT_INFO_EXCHANGE				8

#define ACT_FUNC_SIZE                 (MAX_ACT_STATE * MAX_ACT_MSG)
//
// STA's AUTHENTICATION state machine: states, evvents, total function #
//
#define AUTH_REQ_IDLE                   0
#define AUTH_WAIT_SEQ2                  1
#define AUTH_WAIT_SEQ4                  2
#define MAX_AUTH_STATE                  3

#define AUTH_MACHINE_BASE               0
#define MT2_MLME_AUTH_REQ               0
#define MT2_PEER_AUTH_EVEN              1
#define MT2_AUTH_TIMEOUT                2
#define MAX_AUTH_MSG                    3

#define AUTH_FUNC_SIZE                  (MAX_AUTH_STATE * MAX_AUTH_MSG)

//
// STA's AUTH_RSP state machine: states, events, total function #
//
#define AUTH_RSP_IDLE                   0
#define AUTH_RSP_WAIT_CHAL              1
#define MAX_AUTH_RSP_STATE              2

#define AUTH_RSP_MACHINE_BASE           0
#define MT2_AUTH_CHALLENGE_TIMEOUT      0
#define MT2_PEER_AUTH_ODD               1
#define MT2_PEER_DEAUTH                 2
#define MAX_AUTH_RSP_MSG                3

#define AUTH_RSP_FUNC_SIZE              (MAX_AUTH_RSP_STATE * MAX_AUTH_RSP_MSG)

//
// STA's SYNC state machine: states, events, total function #
//
#define SYNC_IDLE                       0  // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
#define JOIN_WAIT_BEACON                1
#define SCAN_LISTEN                     2
#define MAX_SYNC_STATE                  3

#define SYNC_MACHINE_BASE               0
#define MT2_MLME_SCAN_REQ               0
#define MT2_MLME_JOIN_REQ               1
#define MT2_MLME_START_REQ              2
#define MT2_PEER_BEACON                 3
#define MT2_PEER_PROBE_RSP              4
#define MT2_PEER_ATIM                   5
#define MT2_SCAN_TIMEOUT                6
#define MT2_BEACON_TIMEOUT              7
#define MT2_ATIM_TIMEOUT                8
#define MT2_PEER_PROBE_REQ              9
#define MAX_SYNC_MSG                    10

#define SYNC_FUNC_SIZE                  (MAX_SYNC_STATE * MAX_SYNC_MSG)

//Messages for the DLS state machine
#define DLS_IDLE						0
#define MAX_DLS_STATE					1

#define DLS_MACHINE_BASE				0
#define MT2_MLME_DLS_REQ			    0
#define MT2_PEER_DLS_REQ			    1
#define MT2_PEER_DLS_RSP			    2
#define MT2_MLME_DLS_TEAR_DOWN		    3
#define MT2_PEER_DLS_TEAR_DOWN		    4
#define MAX_DLS_MSG				        5

#define DLS_FUNC_SIZE					(MAX_DLS_STATE * MAX_DLS_MSG)

//
// WSC State machine: states, events, total function #
//

//
// AP's CONTROL/CONNECT state machine: states, events, total function #
//
#define AP_CNTL_FUNC_SIZE               1

//
// AP's ASSOC state machine: states, events, total function #
//
#define AP_ASSOC_IDLE                   0
#define AP_MAX_ASSOC_STATE              1

#define AP_ASSOC_MACHINE_BASE           0
#define APMT2_MLME_DISASSOC_REQ         0
#define APMT2_PEER_DISASSOC_REQ         1
#define APMT2_PEER_ASSOC_REQ            2
#define APMT2_PEER_REASSOC_REQ          3
#define APMT2_CLS3ERR                   4
#define AP_MAX_ASSOC_MSG                5

#define AP_ASSOC_FUNC_SIZE              (AP_MAX_ASSOC_STATE * AP_MAX_ASSOC_MSG)

//
// AP's AUTHENTICATION state machine: states, events, total function #
//
#define AP_AUTH_REQ_IDLE                0
#define AP_MAX_AUTH_STATE               1

#define AP_AUTH_MACHINE_BASE            0
#define APMT2_MLME_DEAUTH_REQ           0
#define APMT2_CLS2ERR                   1
#define APMT2_PEER_DEAUTH				2
#define APMT2_PEER_AUTH_REQ				3
#define APMT2_PEER_AUTH_CONFIRM			4
#define AP_MAX_AUTH_MSG                 5

#define AP_AUTH_FUNC_SIZE               (AP_MAX_AUTH_STATE * AP_MAX_AUTH_MSG)

//
// AP's SYNC state machine: states, events, total function #
//
#define AP_SYNC_IDLE                    0
#define AP_SCAN_LISTEN					1
#define AP_MAX_SYNC_STATE               2

#define AP_SYNC_MACHINE_BASE            0
#define APMT2_PEER_PROBE_REQ            0
#define APMT2_PEER_BEACON               1
#define APMT2_MLME_SCAN_REQ				2
#define APMT2_PEER_PROBE_RSP			3
#define APMT2_SCAN_TIMEOUT				4
#define APMT2_MLME_SCAN_CNCL			5
#define AP_MAX_SYNC_MSG                 6

#define AP_SYNC_FUNC_SIZE               (AP_MAX_SYNC_STATE * AP_MAX_SYNC_MSG)

//
// Common WPA state machine: states, events, total function #
//
#define WPA_PTK                      0
#define MAX_WPA_PTK_STATE            1

#define WPA_MACHINE_BASE             0
#define MT2_EAPPacket                0
#define MT2_EAPOLStart               1
#define MT2_EAPOLLogoff              2
#define MT2_EAPOLKey                 3
#define MT2_EAPOLASFAlert            4
#define MAX_WPA_MSG                  5

#define WPA_FUNC_SIZE                (MAX_WPA_PTK_STATE * MAX_WPA_MSG)

#ifdef APCLI_SUPPORT
//ApCli authentication state machine
#define APCLI_AUTH_REQ_IDLE                0
#define APCLI_AUTH_WAIT_SEQ2               1
#define APCLI_AUTH_WAIT_SEQ4               2
#define APCLI_MAX_AUTH_STATE               3

#define APCLI_AUTH_MACHINE_BASE            0
#define APCLI_MT2_MLME_AUTH_REQ            0
#define APCLI_MT2_MLME_DEAUTH_REQ          1
#define APCLI_MT2_PEER_AUTH_EVEN           2
#define APCLI_MT2_PEER_DEAUTH              3
#define APCLI_MT2_AUTH_TIMEOUT             4
#define APCLI_MAX_AUTH_MSG                 5

#define APCLI_AUTH_FUNC_SIZE               (APCLI_MAX_AUTH_STATE * APCLI_MAX_AUTH_MSG)

//ApCli association state machine
#define APCLI_ASSOC_IDLE                   0
#define APCLI_ASSOC_WAIT_RSP               1
#define APCLI_MAX_ASSOC_STATE              2

#define APCLI_ASSOC_MACHINE_BASE           0
#define APCLI_MT2_MLME_ASSOC_REQ           0
#define APCLI_MT2_MLME_DISASSOC_REQ        1
#define APCLI_MT2_PEER_DISASSOC_REQ        2
#define APCLI_MT2_PEER_ASSOC_RSP           3
#define APCLI_MT2_ASSOC_TIMEOUT            4
#define APCLI_MAX_ASSOC_MSG                5

#define APCLI_ASSOC_FUNC_SIZE              (APCLI_MAX_ASSOC_STATE * APCLI_MAX_ASSOC_MSG)

//ApCli sync state machine
#define APCLI_SYNC_IDLE                   0  // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
#define APCLI_JOIN_WAIT_PROBE_RSP         1
#define APCLI_MAX_SYNC_STATE              2

#define APCLI_SYNC_MACHINE_BASE           0
#define APCLI_MT2_MLME_PROBE_REQ          0
#define APCLI_MT2_PEER_PROBE_RSP          1
#define APCLI_MT2_PROBE_TIMEOUT           2
#define APCLI_MAX_SYNC_MSG                3

#define APCLI_SYNC_FUNC_SIZE              (APCLI_MAX_SYNC_STATE * APCLI_MAX_SYNC_MSG)

//ApCli ctrl state machine
#define APCLI_CTRL_DISCONNECTED           0  // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
#define APCLI_CTRL_PROBE                  1
#define APCLI_CTRL_AUTH                   2
#define APCLI_CTRL_AUTH_2                 3
#define APCLI_CTRL_ASSOC                  4
#define APCLI_CTRL_DEASSOC                5
#define APCLI_CTRL_CONNECTED              6
#define APCLI_MAX_CTRL_STATE              7

#define APCLI_CTRL_MACHINE_BASE           0
#define APCLI_CTRL_JOIN_REQ               0
#define APCLI_CTRL_PROBE_RSP              1
#define APCLI_CTRL_AUTH_RSP               2
#define APCLI_CTRL_DISCONNECT_REQ         3
#define APCLI_CTRL_PEER_DISCONNECT_REQ    4
#define APCLI_CTRL_ASSOC_RSP              5
#define APCLI_CTRL_DEASSOC_RSP            6
#define APCLI_CTRL_JOIN_REQ_TIMEOUT       7
#define APCLI_CTRL_AUTH_REQ_TIMEOUT       8
#define APCLI_CTRL_ASSOC_REQ_TIMEOUT      9
#define APCLI_MAX_CTRL_MSG                10

#define APCLI_CTRL_FUNC_SIZE              (APCLI_MAX_CTRL_STATE * APCLI_MAX_CTRL_MSG)


#endif // APCLI_SUPPORT //


// =============================================================================

// value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header
#define BTYPE_MGMT                  0
#define BTYPE_CNTL                  1
#define BTYPE_DATA                  2

// value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
#define SUBTYPE_ASSOC_REQ           0
#define SUBTYPE_ASSOC_RSP           1
#define SUBTYPE_REASSOC_REQ         2
#define SUBTYPE_REASSOC_RSP         3
#define SUBTYPE_PROBE_REQ           4
#define SUBTYPE_PROBE_RSP           5
#define SUBTYPE_BEACON              8
#define SUBTYPE_ATIM                9
#define SUBTYPE_DISASSOC            10
#define SUBTYPE_AUTH                11
#define SUBTYPE_DEAUTH              12
#define SUBTYPE_ACTION              13
#define SUBTYPE_ACTION_NO_ACK              14

// value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
#define SUBTYPE_WRAPPER		7
#define SUBTYPE_BLOCK_ACK_REQ       8
#define SUBTYPE_BLOCK_ACK           9
#define SUBTYPE_PS_POLL             10
#define SUBTYPE_RTS                 11
#define SUBTYPE_CTS                 12
#define SUBTYPE_ACK                 13
#define SUBTYPE_CFEND               14
#define SUBTYPE_CFEND_CFACK         15

// value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
#define SUBTYPE_DATA                0
#define SUBTYPE_DATA_CFACK          1
#define SUBTYPE_DATA_CFPOLL         2
#define SUBTYPE_DATA_CFACK_CFPOLL   3
#define SUBTYPE_NULL_FUNC           4
#define SUBTYPE_CFACK               5
#define SUBTYPE_CFPOLL              6
#define SUBTYPE_CFACK_CFPOLL        7
#define SUBTYPE_QDATA               8
#define SUBTYPE_QDATA_CFACK         9
#define SUBTYPE_QDATA_CFPOLL        10
#define SUBTYPE_QDATA_CFACK_CFPOLL  11
#define SUBTYPE_QOS_NULL            12
#define SUBTYPE_QOS_CFACK           13
#define SUBTYPE_QOS_CFPOLL          14
#define SUBTYPE_QOS_CFACK_CFPOLL    15

// ACK policy of QOS Control field bit 6:5
#define NORMAL_ACK                  0x00  // b6:5 = 00
#define NO_ACK                      0x20  // b6:5 = 01
#define NO_EXPLICIT_ACK             0x40  // b6:5 = 10
#define BLOCK_ACK                   0x60  // b6:5 = 11

//
// rtmp_data.c use these definition
//
#define LENGTH_802_11               24
#define LENGTH_802_11_AND_H         30
#define LENGTH_802_11_CRC_H         34
#define LENGTH_802_11_CRC           28
#define LENGTH_802_11_WITH_ADDR4    30
#define LENGTH_802_3                14
#define LENGTH_802_3_TYPE           2
#define LENGTH_802_1_H              8
#define LENGTH_EAPOL_H              4
#define LENGTH_WMMQOS_H				2
#define LENGTH_CRC                  4
#define MAX_SEQ_NUMBER              0x0fff
#define LENGTH_802_3_NO_TYPE		12
#define LENGTH_802_1Q				4 /* VLAN related */

// STA_CSR4.field.TxResult
#define TX_RESULT_SUCCESS           0
#define TX_RESULT_ZERO_LENGTH       1
#define TX_RESULT_UNDER_RUN         2
#define TX_RESULT_OHY_ERROR         4
#define TX_RESULT_RETRY_FAIL        6

// All PHY rate summary in TXD
// Preamble MODE in TxD
#define MODE_CCK	0
#define MODE_OFDM   1
#ifdef DOT11_N_SUPPORT
#define MODE_HTMIX	2
#define MODE_HTGREENFIELD	3
#endif // DOT11_N_SUPPORT //
// MCS for CCK.  BW.SGI.STBC are reserved
#define MCS_LONGP_RATE_1                      0	 // long preamble CCK 1Mbps
#define MCS_LONGP_RATE_2                      1	// long preamble CCK 1Mbps
#define MCS_LONGP_RATE_5_5                    2
#define MCS_LONGP_RATE_11                     3
#define MCS_SHORTP_RATE_1                      4	 // long preamble CCK 1Mbps. short is forbidden in 1Mbps
#define MCS_SHORTP_RATE_2                      5	// short preamble CCK 2Mbps
#define MCS_SHORTP_RATE_5_5                    6
#define MCS_SHORTP_RATE_11                     7
// To send duplicate legacy OFDM. set BW=BW_40.  SGI.STBC are reserved
#define MCS_RATE_6                      0   // legacy OFDM
#define MCS_RATE_9                      1   // OFDM
#define MCS_RATE_12                     2   // OFDM
#define MCS_RATE_18                     3   // OFDM
#define MCS_RATE_24                     4  // OFDM
#define MCS_RATE_36                     5   // OFDM
#define MCS_RATE_48                     6  // OFDM
#define MCS_RATE_54                     7 // OFDM
// HT
#define MCS_0		0	// 1S
#define MCS_1		1
#define MCS_2		2
#define MCS_3		3
#define MCS_4		4
#define MCS_5		5
#define MCS_6		6
#define MCS_7		7
#define MCS_8		8	// 2S
#define MCS_9		9
#define MCS_10		10
#define MCS_11		11
#define MCS_12		12
#define MCS_13		13
#define MCS_14		14
#define MCS_15		15
#define MCS_16		16	// 3*3
#define MCS_17		17
#define MCS_18		18
#define MCS_19		19
#define MCS_20		20
#define MCS_21		21
#define MCS_22		22
#define MCS_23		23
#define MCS_32		32
#define MCS_AUTO		33

#ifdef DOT11_N_SUPPORT
// OID_HTPHYMODE
// MODE
#define HTMODE_MM	0
#define HTMODE_GF	1
#endif // DOT11_N_SUPPORT //

// Fixed Tx MODE - HT, CCK or OFDM
#define FIXED_TXMODE_HT		0
#define FIXED_TXMODE_CCK	1
#define FIXED_TXMODE_OFDM	2
// BW
#define BW_20		BAND_WIDTH_20
#define BW_40		BAND_WIDTH_40
#define BW_BOTH		BAND_WIDTH_BOTH
#define BW_10		BAND_WIDTH_10	// 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.

#ifdef DOT11_N_SUPPORT
// SHORTGI
#define GI_400		GAP_INTERVAL_400	// only support in HT mode
#define GI_BOTH		GAP_INTERVAL_BOTH
#endif // DOT11_N_SUPPORT //
#define GI_800		GAP_INTERVAL_800
// STBC
#define STBC_NONE	0
#ifdef DOT11_N_SUPPORT
#define STBC_USE	1	// limited use in rt2860b phy
#define RXSTBC_ONE	1	// rx support of one spatial stream
#define RXSTBC_TWO	2	// rx support of 1 and 2 spatial stream
#define RXSTBC_THR	3	// rx support of 1~3 spatial stream
// MCS FEEDBACK
#define MCSFBK_NONE	0  // not support mcs feedback /
#define MCSFBK_RSV	1	// reserved
#define MCSFBK_UNSOLICIT	2	// only support unsolict mcs feedback
#define MCSFBK_MRQ	3	// response to both MRQ and unsolict mcs feedback

// MIMO power safe
#define	MMPS_STATIC	0
#define	MMPS_DYNAMIC		1
#define   MMPS_RSV		2
#define MMPS_ENABLE		3


// A-MSDU size
#define	AMSDU_0	0
#define	AMSDU_1		1

#endif // DOT11_N_SUPPORT //

// MCS use 7 bits
#define TXRATEMIMO		0x80
#define TXRATEMCS		0x7F
#define TXRATEOFDM		0x7F
#define RATE_1                      0
#define RATE_2                      1
#define RATE_5_5                    2
#define RATE_11                     3
#define RATE_6                      4   // OFDM
#define RATE_9                      5   // OFDM
#define RATE_12                     6   // OFDM
#define RATE_18                     7   // OFDM
#define RATE_24                     8   // OFDM
#define RATE_36                     9   // OFDM
#define RATE_48                     10  // OFDM
#define RATE_54                     11  // OFDM
#define RATE_FIRST_OFDM_RATE        RATE_6
#define RATE_LAST_OFDM_RATE		RATE_54
#define RATE_6_5                    12  // HT mix
#define RATE_13                     13  // HT mix
#define RATE_19_5                   14  // HT mix
#define RATE_26                     15  // HT mix
#define RATE_39                     16  // HT mix
#define RATE_52                     17  // HT mix
#define RATE_58_5                   18  // HT mix
#define RATE_65                     19  // HT mix
#define RATE_78                     20  // HT mix
#define RATE_104                    21  // HT mix
#define RATE_117                    22  // HT mix
#define RATE_130                    23  // HT mix
//#define RATE_AUTO_SWITCH            255 // for StaCfg.FixedTxRate only
#define HTRATE_0                      12
#define RATE_FIRST_MM_RATE        HTRATE_0
#define RATE_FIRST_HT_RATE        HTRATE_0
#define RATE_LAST_HT_RATE        HTRATE_0

// pTxWI->txop
#define IFS_HTTXOP                 0	// The txop will be handles by ASIC.
#define IFS_PIFS                    1
#define IFS_SIFS                    2
#define IFS_BACKOFF                 3

// pTxD->RetryMode
#define LONG_RETRY                  1
#define SHORT_RETRY                 0

// Country Region definition
#define REGION_MINIMUM_BG_BAND            0
#define REGION_0_BG_BAND                  0       // 1-11
#define REGION_1_BG_BAND                  1       // 1-13
#define REGION_2_BG_BAND                  2       // 10-11
#define REGION_3_BG_BAND                  3       // 10-13
#define REGION_4_BG_BAND                  4       // 14
#define REGION_5_BG_BAND                  5       // 1-14
#define REGION_6_BG_BAND                  6       // 3-9
#define REGION_7_BG_BAND                  7       // 5-13
#define REGION_31_BG_BAND                 31       // 5-13
#define REGION_MAXIMUM_BG_BAND            7

#define REGION_MINIMUM_A_BAND             0
#define REGION_0_A_BAND                   0       // 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
#define REGION_1_A_BAND                   1       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
#define REGION_2_A_BAND                   2       // 36, 40, 44, 48, 52, 56, 60, 64
#define REGION_3_A_BAND                   3       // 52, 56, 60, 64, 149, 153, 157, 161
#define REGION_4_A_BAND                   4       // 149, 153, 157, 161, 165
#define REGION_5_A_BAND                   5       // 149, 153, 157, 161
#define REGION_6_A_BAND                   6       // 36, 40, 44, 48
#define REGION_7_A_BAND                   7       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165, 169, 173
#define REGION_8_A_BAND                   8       // 52, 56, 60, 64
#define REGION_9_A_BAND                   9       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165
#define REGION_10_A_BAND                  10	  // 36, 40, 44, 48, 149, 153, 157, 161, 165
#define REGION_11_A_BAND                  11	  // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161
#define REGION_12_A_BAND                  12       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
#define REGION_13_A_BAND                  13       // 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161
#define REGION_14_A_BAND                  14       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165
#define REGION_15_A_BAND                  15       // 149, 153, 157, 161, 165, 169, 173
#define REGION_MAXIMUM_A_BAND             15

// pTxD->CipherAlg
#define CIPHER_NONE                 0
#define CIPHER_WEP64                1
#define CIPHER_WEP128               2
#define CIPHER_TKIP                 3
#define CIPHER_AES                  4
#define CIPHER_CKIP64               5
#define CIPHER_CKIP128              6
#define CIPHER_TKIP_NO_MIC          7       // MIC appended by driver: not a valid value in hardware key table
#define CIPHER_SMS4					8


// LED Status.
#define LED_LINK_DOWN               0
#define LED_LINK_UP                 1
#define LED_RADIO_OFF               2
#define LED_RADIO_ON                3
#define LED_HALT                    4
#define LED_WPS                     5
#define LED_ON_SITE_SURVEY          6
#define LED_POWER_UP                7


// value domain of pAd->LedCntl.LedMode and E2PROM
#define LED_MODE_DEFAULT            0
#define LED_MODE_TWO_LED			1
//#define LED_MODE_SIGNAL_STREGTH		8  // EEPROM define =8
#define LED_MODE_SIGNAL_STREGTH		0x40 // EEPROM define = 64

// RC4 init value, used fro WEP & TKIP
#define PPPINITFCS32                0xffffffff   /* Initial FCS value */

// value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition
#define WPA_802_1X_PORT_SECURED     1
#define WPA_802_1X_PORT_NOT_SECURED 2

#define PAIRWISE_KEY                1
#define GROUP_KEY                   2

//definition of DRS
#define MAX_STEP_OF_TX_RATE_SWITCH	32


// pre-allocated free NDIS PACKET/BUFFER poll for internal usage
#define MAX_NUM_OF_FREE_NDIS_PACKET 128

//Block ACK
#define MAX_TX_REORDERBUF   64
#define MAX_RX_REORDERBUF   64
#define DEFAULT_TX_TIMEOUT   30
#define DEFAULT_RX_TIMEOUT   30

// definition of Recipient or Originator
#define I_RECIPIENT                  TRUE
#define I_ORIGINATOR                   FALSE

#define DEFAULT_BBP_TX_POWER        0
#define DEFAULT_RF_TX_POWER         5

#define MAX_INI_BUFFER_SIZE		4096
#define MAX_PARAM_BUFFER_SIZE		(2048) // enough for ACL (18*64)
											//18 : the length of Mac address acceptable format "01:02:03:04:05:06;")
											//64 : MAX_NUM_OF_ACL_LIST
// definition of pAd->OpMode
#define OPMODE_STA                  0
#define OPMODE_AP                   1
//#define OPMODE_L3_BRG               2       // as AP and STA at the same time

#ifdef RT_BIG_ENDIAN
#define DIR_READ                    0
#define DIR_WRITE                   1
#define TYPE_TXD                    0
#define TYPE_RXD                    1
#define TYPE_TXINFO					0
#define TYPE_RXINFO					1
#define TYPE_TXWI					0
#define TYPE_RXWI					1
#endif

// ========================= AP rtmp_def.h ===========================
// value domain for pAd->EventTab.Log[].Event
#define EVENT_RESET_ACCESS_POINT    0 // Log = "hh:mm:ss   Restart Access Point"
#define EVENT_ASSOCIATED            1 // Log = "hh:mm:ss   STA 00:01:02:03:04:05 associated"
#define EVENT_DISASSOCIATED         2 // Log = "hh:mm:ss   STA 00:01:02:03:04:05 left this BSS"
#define EVENT_AGED_OUT              3 // Log = "hh:mm:ss   STA 00:01:02:03:04:05 was aged-out and removed from this BSS"
#define EVENT_COUNTER_M             4
#define EVENT_INVALID_PSK           5
#define EVENT_MAX_EVENT_TYPE        6
// ==== end of AP rtmp_def.h ============

// definition RSSI Number
#define RSSI_0					0
#define RSSI_1					1
#define RSSI_2					2

// definition of radar detection
#define RD_NORMAL_MODE				0	// Not found radar signal
#define RD_SWITCHING_MODE			1	// Found radar signal, and doing channel switch
#define RD_SILENCE_MODE				2	// After channel switch, need to be silence a while to ensure radar not found

//Driver defined cid for mapping status and command.
#define  SLEEPCID	0x11
#define  WAKECID	0x22
#define  QUERYPOWERCID	0x33
#define  OWNERMCU	0x1
#define  OWNERCPU	0x0

// MBSSID definition
#define ENTRY_NOT_FOUND             0xFF


/* After Linux 2.6.9,
 * VLAN module use Private (from user) interface flags (netdevice->priv_flags).
 * #define IFF_802_1Q_VLAN 0x1         --    802.1Q VLAN device.  in if.h
 * ref to ip_sabotage_out() [ out->priv_flags & IFF_802_1Q_VLAN ] in br_netfilter.c
 *
 * For this reason, we MUST use EVEN value in priv_flags
 */
#define INT_MAIN			0x0100
#define INT_MBSSID			0x0200
#define INT_WDS				0x0300
#define INT_APCLI			0x0400
#define INT_MESH			0x0500

#define INF_MAIN_DEV_NAME		"wlan"
#define INF_MBSSID_DEV_NAME		"wlan"
#define INF_WDS_DEV_NAME		"wds"
#define INF_APCLI_DEV_NAME		"apcli"
#define INF_MESH_DEV_NAME		"mesh"

// Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode).
#ifdef RALINK_ATE
#define	ATE_START                   0x00   // Start ATE
#define	ATE_STOP                    0x80   // Stop ATE
#define	ATE_TXCONT                  0x05   // Continuous Transmit
#define	ATE_TXCARR                  0x09   // Transmit Carrier
#define	ATE_TXCARRSUPP              0x11   // Transmit Carrier Suppression
#define	ATE_TXFRAME                 0x01   // Transmit Frames
#define	ATE_RXFRAME                 0x02   // Receive Frames
#ifdef RALINK_28xx_QA
#define ATE_TXSTOP                  0xe2   // Stop Transmition(i.e., TXCONT, TXCARR, TXCARRSUPP, and TXFRAME)
#define ATE_RXSTOP					0xfd   // Stop receiving Frames
#define	BBP22_TXFRAME				0x00   // Transmit Frames
#define	BBP22_TXCONT_OR_CARRSUPP    0x80   // Continuous Transmit or Carrier Suppression
#define	BBP22_TXCARR                0xc1   // Transmit Carrier
#define	BBP24_TXCONT                0x00   // Continuous Transmit
#define	BBP24_CARRSUPP              0x01   // Carrier Suppression
#endif // RALINK_28xx_QA //
#endif // RALINK_ATE //

// WEP Key TYPE
#define WEP_HEXADECIMAL_TYPE    0
#define WEP_ASCII_TYPE          1


// WIRELESS EVENTS definition
/* Max number of char in custom event, refer to wireless_tools.28/wireless.20.h */
#define IW_CUSTOM_MAX_LEN							255	/* In bytes */

// For system event - start
#define	IW_SYS_EVENT_FLAG_START                     0x0200
#define	IW_ASSOC_EVENT_FLAG                         0x0200
#define	IW_DISASSOC_EVENT_FLAG                      0x0201
#define	IW_DEAUTH_EVENT_FLAG				0x0202
#define	IW_AGEOUT_EVENT_FLAG				0x0203
#define	IW_COUNTER_MEASURES_EVENT_FLAG              0x0204
#define	IW_REPLAY_COUNTER_DIFF_EVENT_FLAG           0x0205
#define	IW_RSNIE_DIFF_EVENT_FLAG				0x0206
#define	IW_MIC_DIFF_EVENT_FLAG					0x0207
#define IW_ICV_ERROR_EVENT_FLAG						0x0208
#define IW_MIC_ERROR_EVENT_FLAG						0x0209
#define IW_GROUP_HS_TIMEOUT_EVENT_FLAG				0x020A
#define	IW_PAIRWISE_HS_TIMEOUT_EVENT_FLAG			0x020B
#define IW_RSNIE_SANITY_FAIL_EVENT_FLAG				0x020C
#define IW_SET_KEY_DONE_WPA1_EVENT_FLAG				0x020D
#define IW_SET_KEY_DONE_WPA2_EVENT_FLAG				0x020E
#define IW_STA_LINKUP_EVENT_FLAG					0x020F
#define IW_STA_LINKDOWN_EVENT_FLAG					0x0210
#define IW_SCAN_COMPLETED_EVENT_FLAG				0x0211
#define IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG				0x0212
// if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END
#define	IW_SYS_EVENT_FLAG_END                       0x0212
#define	IW_SYS_EVENT_TYPE_NUM						(IW_SYS_EVENT_FLAG_END - IW_SYS_EVENT_FLAG_START + 1)
// For system event - end

// For spoof attack event - start
#define	IW_SPOOF_EVENT_FLAG_START                   0x0300
#define IW_CONFLICT_SSID_EVENT_FLAG					0x0300
#define IW_SPOOF_ASSOC_RESP_EVENT_FLAG				0x0301
#define IW_SPOOF_REASSOC_RESP_EVENT_FLAG			0x0302
#define IW_SPOOF_PROBE_RESP_EVENT_FLAG				0x0303
#define IW_SPOOF_BEACON_EVENT_FLAG					0x0304
#define IW_SPOOF_DISASSOC_EVENT_FLAG				0x0305
#define IW_SPOOF_AUTH_EVENT_FLAG					0x0306
#define IW_SPOOF_DEAUTH_EVENT_FLAG					0x0307
#define IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG			0x0308
#define IW_REPLAY_ATTACK_EVENT_FLAG					0x0309
// if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END
#define	IW_SPOOF_EVENT_FLAG_END                     0x0309
#define	IW_SPOOF_EVENT_TYPE_NUM						(IW_SPOOF_EVENT_FLAG_END - IW_SPOOF_EVENT_FLAG_START + 1)
// For spoof attack event - end

// For flooding attack event - start
#define	IW_FLOOD_EVENT_FLAG_START                   0x0400
#define IW_FLOOD_AUTH_EVENT_FLAG					0x0400
#define IW_FLOOD_ASSOC_REQ_EVENT_FLAG				0x0401
#define IW_FLOOD_REASSOC_REQ_EVENT_FLAG				0x0402
#define IW_FLOOD_PROBE_REQ_EVENT_FLAG				0x0403
#define IW_FLOOD_DISASSOC_EVENT_FLAG				0x0404
#define IW_FLOOD_DEAUTH_EVENT_FLAG					0x0405
#define IW_FLOOD_EAP_REQ_EVENT_FLAG					0x0406
// if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END
#define	IW_FLOOD_EVENT_FLAG_END				0x0406
#define	IW_FLOOD_EVENT_TYPE_NUM						(IW_FLOOD_EVENT_FLAG_END - IW_FLOOD_EVENT_FLAG_START + 1)
// For flooding attack - end

// End - WIRELESS EVENTS definition

#ifdef CONFIG_STA_SUPPORT
// definition for DLS, kathy
#define	MAX_NUM_OF_INIT_DLS_ENTRY   1
#define	MAX_NUM_OF_DLS_ENTRY        MAX_NUMBER_OF_DLS_ENTRY

//Block ACK, kathy
#define MAX_TX_REORDERBUF		64
#define MAX_RX_REORDERBUF		64
#define DEFAULT_TX_TIMEOUT		30
#define DEFAULT_RX_TIMEOUT		30
#define MAX_BARECI_SESSION		8

#ifndef IW_ESSID_MAX_SIZE
/* Maximum size of the ESSID and pAd->nickname strings */
#define IW_ESSID_MAX_SIZE		32
#endif
#endif // CONFIG_STA_SUPPORT //

#ifdef MCAST_RATE_SPECIFIC
#define MCAST_DISABLE	0
#define MCAST_CCK		1
#define MCAST_OFDM		2
#define MCAST_HTMIX		3
#endif // MCAST_RATE_SPECIFIC //

// For AsicRadioOff/AsicRadioOn function
#define DOT11POWERSAVE		0
#define GUIRADIO_OFF		1
#define RTMP_HALT		    2
#define GUI_IDLE_POWER_SAVE		3
// --


// definition for WpaSupport flag
#define WPA_SUPPLICANT_DISABLE				0
#define WPA_SUPPLICANT_ENABLE				1
#define	WPA_SUPPLICANT_ENABLE_WITH_WEB_UI	2

// definition for Antenna Diversity flag
#ifdef ANT_DIVERSITY_SUPPORT
enum ANT_DIVERSITY_TYPE {
    ANT_DIVERSITY_DISABLE = 0,
    ANT_DIVERSITY_ENABLE = 1,
    ANT_FIX_ANT1 = 2,
    ANT_FIX_ANT2 = 3
};
#endif // ANT_DIVERSITY_SUPPORT //

// Endian byte swapping codes
#define SWAP16(x) \
    ((UINT16)( \
    (((UINT16)(x) & (UINT16) 0x00ffU) << 8) | \
    (((UINT16)(x) & (UINT16) 0xff00U) >> 8) ))

#define SWAP32(x) \
    ((UINT32)( \
    (((UINT32)(x) & (UINT32) 0x000000ffUL) << 24) | \
    (((UINT32)(x) & (UINT32) 0x0000ff00UL) <<  8) | \
    (((UINT32)(x) & (UINT32) 0x00ff0000UL) >>  8) | \
    (((UINT32)(x) & (UINT32) 0xff000000UL) >> 24) ))

#define SWAP64(x) \
    ((UINT64)( \
    (UINT64)(((UINT64)(x) & (UINT64) 0x00000000000000ffULL) << 56) | \
    (UINT64)(((UINT64)(x) & (UINT64) 0x000000000000ff00ULL) << 40) | \
    (UINT64)(((UINT64)(x) & (UINT64) 0x0000000000ff0000ULL) << 24) | \
    (UINT64)(((UINT64)(x) & (UINT64) 0x00000000ff000000ULL) <<  8) | \
    (UINT64)(((UINT64)(x) & (UINT64) 0x000000ff00000000ULL) >>  8) | \
    (UINT64)(((UINT64)(x) & (UINT64) 0x0000ff0000000000ULL) >> 24) | \
    (UINT64)(((UINT64)(x) & (UINT64) 0x00ff000000000000ULL) >> 40) | \
    (UINT64)(((UINT64)(x) & (UINT64) 0xff00000000000000ULL) >> 56) ))

#ifdef RT_BIG_ENDIAN

#define cpu2le64(x) SWAP64((x))
#define le2cpu64(x) SWAP64((x))
#define cpu2le32(x) SWAP32((x))
#define le2cpu32(x) SWAP32((x))
#define cpu2le16(x) SWAP16((x))
#define le2cpu16(x) SWAP16((x))
#define cpu2be64(x) ((UINT64)(x))
#define be2cpu64(x) ((UINT64)(x))
#define cpu2be32(x) ((UINT32)(x))
#define be2cpu32(x) ((UINT32)(x))
#define cpu2be16(x) ((UINT16)(x))
#define be2cpu16(x) ((UINT16)(x))

#else   // Little_Endian

#define cpu2le64(x) ((UINT64)(x))
#define le2cpu64(x) ((UINT64)(x))
#define cpu2le32(x) ((UINT32)(x))
#define le2cpu32(x) ((UINT32)(x))
#define cpu2le16(x) ((UINT16)(x))
#define le2cpu16(x) ((UINT16)(x))
#define cpu2be64(x) SWAP64((x))
#define be2cpu64(x) SWAP64((x))
#define cpu2be32(x) SWAP32((x))
#define be2cpu32(x) SWAP32((x))
#define cpu2be16(x) SWAP16((x))
#define be2cpu16(x) SWAP16((x))

#endif  // RT_BIG_ENDIAN

#define ABS(_x, _y) ((_x) > (_y)) ? ((_x) -(_y)) : ((_y) -(_x))


#define A2Dec(_X, _p)				\
{									\
	UCHAR *p;						\
	_X = 0;							\
	p = _p;							\
	while (((*p >= '0') && (*p <= '9')))		\
	{												\
		if ((*p >= '0') && (*p <= '9'))		\
			_X = _X * 10 + *p - 48;					\
		p++;										\
	}												\
}


#define A2Hex(_X, _p)				\
do{									\
	char *__p;						\
	(_X) = 0;							\
	__p = (char *)(_p);							\
	while (((*__p >= 'a') && (*__p <= 'f')) || ((*__p >= 'A') && (*__p <= 'F')) || ((*__p >= '0') && (*__p <= '9')))		\
	{												\
		if ((*__p >= 'a') && (*__p <= 'f'))				\
			(_X) = (_X) * 16 + *__p - 87;					\
		else if ((*__p >= 'A') && (*__p <= 'F'))		\
			(_X) = (_X) * 16 + *__p - 55;					\
		else if ((*__p >= '0') && (*__p <= '9'))		\
			(_X) = (_X) * 16 + *__p - 48;					\
		__p++;										\
	}												\
}while(0)

#endif  // __RTMP_DEF_H__