/*
 *************************************************************************
 * Ralink Tech Inc.
 * 5F., No.36, Taiyuan St., Jhubei City,
 * Hsinchu County 302,
 * Taiwan, R.O.C.
 *
 * (c) Copyright 2002-2007, Ralink Technology, Inc.
 *
 * This program is free software; you can redistribute it and/or modify  *
 * it under the terms of the GNU General Public License as published by  *
 * the Free Software Foundation; either version 2 of the License, or     *
 * (at your option) any later version.                                   *
 *                                                                       *
 * This program is distributed in the hope that it will be useful,       *
 * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
 * GNU General Public License for more details.                          *
 *                                                                       *
 * You should have received a copy of the GNU General Public License     *
 * along with this program; if not, write to the                         *
 * Free Software Foundation, Inc.,                                       *
 * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
 *                                                                       *
 *************************************************************************

	Module Name:
	rt33xx.c

	Abstract:
	Specific funcitons and variables for RT30xx.

	Revision History:
	Who         When          What
	--------    ----------    ----------------------------------------------
*/


#ifdef RT33xx


#ifndef RTMP_RF_RW_SUPPORT
#error "You Should Enable compile flag RTMP_RF_RW_SUPPORT for this chip"
#endif // RTMP_RF_RW_SUPPORT //

#include "../rt_config.h"


//
// RF register initialization set
//
REG_PAIR RFRegTableOverRT3390[] = {
	{RF_R00,		0xA0},
	{RF_R01,		0xE1},
	{RF_R02,		0xF1},
	{RF_R03,		0x62},
	{RF_R04,		0x40},
	{RF_R05,		0x8B},
	{RF_R06,		0x42},
	{RF_R07,		0x34},
	{RF_R08,		0x00}, // Read only
	{RF_R09,		0xC0},

	{RF_R10,		0x61},
	{RF_R11,		0x21},
	{RF_R12,		0x3B},
	{RF_R13,		0xE0},
	{RF_R14,		0x90},
	{RF_R15,		0x53},
	{RF_R16,		0x0E},
	{RF_R17,		0x94},
	{RF_R18,		0x5C},
	{RF_R19,		0x4A},

	{RF_R20,		0xB2},
	{RF_R21,		0xF6},
	{RF_R22,		0x00},
	{RF_R23,		0x14},
	{RF_R24,		0x08},
	{RF_R25,		0x3D},
	{RF_R26,		0x85},
	{RF_R27,		0x00},
	{RF_R28,		0x41},
	{RF_R29,		0x8F},
	{RF_R30,		0x20},
	{RF_R31,		0x0F},
};

UCHAR NUM_RF_REG_PARMS_OVER_RT3390=(sizeof(RFRegTableOverRT3390) / sizeof(REG_PAIR));


// Antenna divesity use GPIO3 and EESK pin for control
// Antenna and EEPROM access are both using EESK pin,
// Therefor we should avoid accessing EESK at the same time
// Then restore antenna after EEPROM access
// The original name of this function is AsicSetRxAnt(), now change to
//VOID AsicSetRxAnt(

VOID RT33xxSetRxAnt(
	IN PRTMP_ADAPTER	pAd,
	IN UCHAR			Ant)
{
	UINT32	Value;
	UINT32	x;

	if ((pAd->EepromAccess) ||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS))	||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))	||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) ||
		(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
	{
		return;
	}

	// the antenna selection is through firmware and MAC register(GPIO3)
	if (Ant == 0)
	{
		// Main antenna
		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
		x |= (EESK);
		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);

		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
		Value &= ~(0x0808);
		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
		DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to main antenna\n"));
	}
	else
	{
		// Aux antenna
		RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
		x &= ~(EESK);
		RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);

		RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value);
		Value &= ~(0x0808);
		Value |= 0x08;
		RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
		DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to aux antenna\n"));
	}
}


/*
	========================================================================

	Routine Description:
		For RF filter calibration purpose

	Arguments:
		pAd                          Pointer to our adapter

	Return Value:
		None

	IRQL = PASSIVE_LEVEL

	========================================================================
*/
VOID RTMPFilterCalibration(
	IN PRTMP_ADAPTER pAd)
{
	UCHAR	R55x = 0, value, FilterTarget = 0x1E, BBPValue=0;
	UINT	loop = 0, count = 0, loopcnt = 0, ReTry = 0;
	UCHAR	RF_R24_Value = 0;

	// Give bbp filter initial value
	pAd->Mlme.CaliBW20RfR24 = 0x1F;
	pAd->Mlme.CaliBW40RfR24 = 0x2F; //Bit[5] must be 1 for BW 40

	do
	{
		if (loop == 1)	//BandWidth = 40 MHz
		{
			// Write 0x27 to RF_R24 to program filter
			RF_R24_Value = 0x27;
			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
			if (IS_RT3090(pAd) || IS_RT3572(pAd)|| IS_RT3390(pAd))
				FilterTarget = 0x15;
			else
				FilterTarget = 0x19;

			// when calibrate BW40, BBP mask must set to BW40.
			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
			BBPValue&= (~0x18);
			BBPValue|= (0x10);
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);

			// set to BW40
			RT30xxReadRFRegister(pAd, RF_R31, &value);
			value |= 0x20;
			RT30xxWriteRFRegister(pAd, RF_R31, value);
		}
		else			//BandWidth = 20 MHz
		{
			// Write 0x07 to RF_R24 to program filter
			RF_R24_Value = 0x07;
			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
			if (IS_RT3090(pAd) || IS_RT3572(pAd)|| IS_RT3390(pAd))
				FilterTarget = 0x13;
			else
				FilterTarget = 0x16;

			// set to BW20
			RT30xxReadRFRegister(pAd, RF_R31, &value);
			value &= (~0x20);
			RT30xxWriteRFRegister(pAd, RF_R31, value);
		}

		// Write 0x01 to RF_R22 to enable baseband loopback mode
		RT30xxReadRFRegister(pAd, RF_R22, &value);
		value |= 0x01;
		RT30xxWriteRFRegister(pAd, RF_R22, value);

		// Write 0x00 to BBP_R24 to set power & frequency of passband test tone
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0);

		do
		{
			// Write 0x90 to BBP_R25 to transmit test tone
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90);

			RTMPusecDelay(1000);
			// Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0]
			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value);
			R55x = value & 0xFF;

		} while ((ReTry++ < 100) && (R55x == 0));

		// Write 0x06 to BBP_R24 to set power & frequency of stopband test tone
		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0x06);

		while(TRUE)
		{
			// Write 0x90 to BBP_R25 to transmit test tone
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90);

			//We need to wait for calibration
			RTMPusecDelay(1000);
			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value);
			value &= 0xFF;
			if ((R55x - value) < FilterTarget)
			{
				RF_R24_Value ++;
			}
			else if ((R55x - value) == FilterTarget)
			{
				RF_R24_Value ++;
				count ++;
			}
			else
			{
				break;
			}

			// prevent infinite loop cause driver hang.
			if (loopcnt++ > 100)
			{
				DBGPRINT(RT_DEBUG_ERROR, ("RTMPFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt));
				break;
			}

			// Write RF_R24 to program filter
			RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
		}

		if (count > 0)
		{
			RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0));
		}

		// Store for future usage
		if (loopcnt < 100)
		{
			if (loop++ == 0)
			{
				//BandWidth = 20 MHz
				pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value;
			}
			else
			{
				//BandWidth = 40 MHz
				pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value;
				break;
			}
		}
		else
			break;

		RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);

		// reset count
		count = 0;
	} while(TRUE);

	//
	// Set back to initial state
	//
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0);

	RT30xxReadRFRegister(pAd, RF_R22, &value);
	value &= ~(0x01);
	RT30xxWriteRFRegister(pAd, RF_R22, value);

	// set BBP back to BW20
	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
	BBPValue&= (~0x18);
	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);

	DBGPRINT(RT_DEBUG_TRACE, ("RTMPFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24));
}


// add by johnli, RF power sequence setup
/*
	==========================================================================
	Description:

	Load RF normal operation-mode setup

	==========================================================================
 */
VOID RT33xxLoadRFNormalModeSetup(
	IN PRTMP_ADAPTER	pAd)
{
	UCHAR RFValue;

	// RX0_PD & TX0_PD, RF R1 register Bit 2 & Bit 3 to 0 and RF_BLOCK_en,RX1_PD & TX1_PD, Bit0, Bit 4 & Bit5 to 1
	RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
	RFValue = (RFValue & (~0x0C)) | 0x31;
	RT30xxWriteRFRegister(pAd, RF_R01, RFValue);

	// TX_LO2_en, RF R15 register Bit 3 to 0
	RT30xxReadRFRegister(pAd, RF_R15, &RFValue);
	RFValue &= (~0x08);
	RT30xxWriteRFRegister(pAd, RF_R15, RFValue);

	/* move to NICInitRT30xxRFRegisters
	// TX_LO1_en, RF R17 register Bit 3 to 0
	RT30xxReadRFRegister(pAd, RF_R17, &RFValue);
	RFValue &= (~0x08);
	// to fix rx long range issue
	if (((pAd->MACVersion & 0xffff) >= 0x0211) && (pAd->NicConfig2.field.ExternalLNAForG == 0))
	{
		RFValue |= 0x20;
	}
	// set RF_R17_bit[2:0] equal to EEPROM setting at 0x48h
	if (pAd->TxMixerGain24G >= 2)
	{
		RFValue &= (~0x7);  // clean bit [2:0]
		RFValue |= pAd->TxMixerGain24G;
	}
	RT30xxWriteRFRegister(pAd, RF_R17, RFValue);
	*/

	// RX_LO1_en, RF R20 register Bit 3 to 0
	RT30xxReadRFRegister(pAd, RF_R20, &RFValue);
	RFValue &= (~0x08);
	RT30xxWriteRFRegister(pAd, RF_R20, RFValue);

	// RX_LO2_en, RF R21 register Bit 3 to 0
	RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
	RFValue &= (~0x08);
	RT30xxWriteRFRegister(pAd, RF_R21, RFValue);

	/* add by johnli, reset RF_R27 when interface down & up to fix throughput problem*/
	// LDORF_VC, RF R27 register Bit 2 to 0
	RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
	// TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F).
	// Raising RF voltage is no longer needed for RT3070(F)
	if (IS_RT3090(pAd))	// RT309x and RT3071/72
	{
		if ((pAd->MACVersion & 0xffff) < 0x0211)
			RFValue = (RFValue & (~0x77)) | 0x3;
		else
			RFValue = (RFValue & (~0x77));
		RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
	}
	/* end johnli */
}

/*
	==========================================================================
	Description:

	Load RF sleep-mode setup

	==========================================================================
 */
VOID RT33xxLoadRFSleepModeSetup(
	IN PRTMP_ADAPTER	pAd)
{
	UCHAR RFValue;
	UINT32 MACValue;


	{
		// RF_BLOCK_en. RF R1 register Bit 0 to 0
		RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
		RFValue &= (~0x01);
		RT30xxWriteRFRegister(pAd, RF_R01, RFValue);

		// VCO_IC, RF R7 register Bit 4 & Bit 5 to 0
		RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
		RFValue &= (~0x30);
		RT30xxWriteRFRegister(pAd, RF_R07, RFValue);

		// Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 0
		RT30xxReadRFRegister(pAd, RF_R09, &RFValue);
		RFValue &= (~0x0E);
		RT30xxWriteRFRegister(pAd, RF_R09, RFValue);

		// RX_CTB_en, RF R21 register Bit 7 to 0
		RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
		RFValue &= (~0x80);
		RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
	}

	if (IS_RT3090(pAd) ||	// IS_RT3090 including RT309x and RT3071/72
		IS_RT3572(pAd) ||
		IS_RT3390(pAd) ||
		(IS_RT3070(pAd) && ((pAd->MACVersion & 0xffff) < 0x0201)))
	{
		{
			RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
			RFValue |= 0x77;
			RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
		}

		RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
		MACValue |= 0x1D000000;
		RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
	}
}

/*
	==========================================================================
	Description:

	Reverse RF sleep-mode setup

	==========================================================================
 */
VOID RT33xxReverseRFSleepModeSetup(
	IN PRTMP_ADAPTER	pAd)
{
	UCHAR RFValue;
	UINT32 MACValue;

	{
		// RF_BLOCK_en, RF R1 register Bit 0 to 1
		RT30xxReadRFRegister(pAd, RF_R01, &RFValue);
		RFValue |= 0x01;
		RT30xxWriteRFRegister(pAd, RF_R01, RFValue);

		// VCO_IC, RF R7 register Bit 4 & Bit 5 to 1
		RT30xxReadRFRegister(pAd, RF_R07, &RFValue);
		RFValue |= 0x30;
		RT30xxWriteRFRegister(pAd, RF_R07, RFValue);

		// Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 1
		RT30xxReadRFRegister(pAd, RF_R09, &RFValue);
		RFValue |= 0x0E;
		RT30xxWriteRFRegister(pAd, RF_R09, RFValue);

		// RX_CTB_en, RF R21 register Bit 7 to 1
		RT30xxReadRFRegister(pAd, RF_R21, &RFValue);
		RFValue |= 0x80;
		RT30xxWriteRFRegister(pAd, RF_R21, RFValue);
	}

	if (IS_RT3090(pAd) ||	// IS_RT3090 including RT309x and RT3071/72
		IS_RT3572(pAd) ||
		IS_RT3390(pAd) ||
		(IS_RT3070(pAd) && ((pAd->MACVersion & 0xffff) < 0x0201)))
	{
		{
			RT30xxReadRFRegister(pAd, RF_R27, &RFValue);
			if ((pAd->MACVersion & 0xffff) < 0x0211)
				RFValue = (RFValue & (~0x77)) | 0x3;
			else
				RFValue = (RFValue & (~0x77));
			RT30xxWriteRFRegister(pAd, RF_R27, RFValue);
		}

		// RT3071 version E has fixed this issue
		if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211))
		{
			// patch tx EVM issue temporarily
			RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
			MACValue = ((MACValue & 0xE0FFFFFF) | 0x0D000000);
			RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
		}
		else
		{
			RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue);
			MACValue = ((MACValue & 0xE0FFFFFF) | 0x01000000);
			RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue);
		}
	}

	if(IS_RT3572(pAd))
		RT30xxWriteRFRegister(pAd, RF_R08, 0x80);
}
// end johnli

VOID RT33xxHaltAction(
	IN PRTMP_ADAPTER	pAd)
{
	UINT32		TxPinCfg = 0x00050F0F;

	//
	// Turn off LNA_PE or TRSW_POL
	//
	if (IS_RT3070(pAd) || IS_RT3071(pAd) || IS_RT3390(pAd)||IS_RT3572(pAd))
	{
	//KH? Both support 3390 usb and  PCI
		if ((IS_RT3071(pAd) || IS_RT3572(pAd)||IS_RT3390(pAd))
#ifdef RTMP_EFUSE_SUPPORT
			&& (pAd->bUseEfuse)
#endif // RTMP_EFUSE_SUPPORT //
			)
		{
			TxPinCfg &= 0xFFFBF0F0; // bit18 off
		}
		else
		{
			TxPinCfg &= 0xFFFFF0F0;
		}

		RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
	}
}

#endif // RT30xx //