/*
 *  Copyright (c) 2000-2009 LSI Corporation.
 *
 *
 *           Name:  mpi2_init.h
 *          Title:  MPI SCSI initiator mode messages and structures
 *  Creation Date:  June 23, 2006
 *
 *    mpi2_init.h Version:  02.00.07
 *
 *  Version History
 *  ---------------
 *
 *  Date      Version   Description
 *  --------  --------  ------------------------------------------------------
 *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
 *  10-31-07  02.00.01  Fixed name for pMpi2SCSITaskManagementRequest_t.
 *  12-18-07  02.00.02  Modified Task Management Target Reset Method defines.
 *  02-29-08  02.00.03  Added Query Task Set and Query Unit Attention.
 *  03-03-08  02.00.04  Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
 *  05-21-08  02.00.05  Fixed typo in name of Mpi2SepRequest_t.
 *  10-02-08  02.00.06  Removed Untagged and No Disconnect values from SCSI IO
 *                      Control field Task Attribute flags.
 *                      Moved LUN field defines to mpi2.h becasue they are
 *                      common to many structures.
 *  05-06-09  02.00.07  Changed task management type of Query Unit Attention to
 *                      Query Asynchronous Event.
 *                      Defined two new bits in the SlotStatus field of the SCSI
 *                      Enclosure Processor Request and Reply.
 *  --------------------------------------------------------------------------
 */

#ifndef MPI2_INIT_H
#define MPI2_INIT_H

/*****************************************************************************
*
*               SCSI Initiator Messages
*
*****************************************************************************/

/****************************************************************************
*  SCSI IO messages and associated structures
****************************************************************************/

typedef struct
{
    U8                      CDB[20];                    /* 0x00 */
    U32                     PrimaryReferenceTag;        /* 0x14 */
    U16                     PrimaryApplicationTag;      /* 0x18 */
    U16                     PrimaryApplicationTagMask;  /* 0x1A */
    U32                     TransferLength;             /* 0x1C */
} MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32,
  Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t;

/* TBD: I don't think this is needed for MPI2/Gen2 */
#if 0
typedef struct
{
    U8                      CDB[16];                    /* 0x00 */
    U32                     DataLength;                 /* 0x10 */
    U32                     PrimaryReferenceTag;        /* 0x14 */
    U16                     PrimaryApplicationTag;      /* 0x18 */
    U16                     PrimaryApplicationTagMask;  /* 0x1A */
    U32                     TransferLength;             /* 0x1C */
} MPI2_SCSI_IO32_CDB_EEDP16, MPI2_POINTER PTR_MPI2_SCSI_IO32_CDB_EEDP16,
  Mpi2ScsiIo32CdbEedp16_t, MPI2_POINTER pMpi2ScsiIo32CdbEedp16_t;
#endif

typedef union
{
    U8                      CDB32[32];
    MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
    MPI2_SGE_SIMPLE_UNION   SGE;
} MPI2_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_UNION,
  Mpi2ScsiIoCdb_t, MPI2_POINTER pMpi2ScsiIoCdb_t;

/* SCSI IO Request Message */
typedef struct _MPI2_SCSI_IO_REQUEST
{
    U16                     DevHandle;                      /* 0x00 */
    U8                      ChainOffset;                    /* 0x02 */
    U8                      Function;                       /* 0x03 */
    U16                     Reserved1;                      /* 0x04 */
    U8                      Reserved2;                      /* 0x06 */
    U8                      MsgFlags;                       /* 0x07 */
    U8                      VP_ID;                          /* 0x08 */
    U8                      VF_ID;                          /* 0x09 */
    U16                     Reserved3;                      /* 0x0A */
    U32                     SenseBufferLowAddress;          /* 0x0C */
    U16                     SGLFlags;                       /* 0x10 */
    U8                      SenseBufferLength;              /* 0x12 */
    U8                      Reserved4;                      /* 0x13 */
    U8                      SGLOffset0;                     /* 0x14 */
    U8                      SGLOffset1;                     /* 0x15 */
    U8                      SGLOffset2;                     /* 0x16 */
    U8                      SGLOffset3;                     /* 0x17 */
    U32                     SkipCount;                      /* 0x18 */
    U32                     DataLength;                     /* 0x1C */
    U32                     BidirectionalDataLength;        /* 0x20 */
    U16                     IoFlags;                        /* 0x24 */
    U16                     EEDPFlags;                      /* 0x26 */
    U32                     EEDPBlockSize;                  /* 0x28 */
    U32                     SecondaryReferenceTag;          /* 0x2C */
    U16                     SecondaryApplicationTag;        /* 0x30 */
    U16                     ApplicationTagTranslationMask;  /* 0x32 */
    U8                      LUN[8];                         /* 0x34 */
    U32                     Control;                        /* 0x3C */
    MPI2_SCSI_IO_CDB_UNION  CDB;                            /* 0x40 */
    MPI2_SGE_IO_UNION       SGL;                            /* 0x60 */
} MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST,
  Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t;

/* SCSI IO MsgFlags bits */

/* MsgFlags for SenseBufferAddressSpace */
#define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR        (0x0C)
#define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR      (0x00)
#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR      (0x04)
#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR      (0x08)
#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR   (0x0C)

/* SCSI IO SGLFlags bits */

/* base values for Data Location Address Space */
#define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK              (0x0C)
#define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR            (0x00)
#define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR            (0x04)
#define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR            (0x08)
#define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR         (0x0C)

/* base values for Type */
#define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK              (0x03)
#define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI               (0x00)
#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32            (0x01)
#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64            (0x02)

/* shift values for each sub-field */
#define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT             (12)
#define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT             (8)
#define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT             (4)
#define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT             (0)

/* SCSI IO IoFlags bits */

/* Large CDB Address Space */
#define MPI2_SCSIIO_CDB_ADDR_MASK                   (0x6000)
#define MPI2_SCSIIO_CDB_ADDR_SYSTEM                 (0x0000)
#define MPI2_SCSIIO_CDB_ADDR_IOCDDR                 (0x2000)
#define MPI2_SCSIIO_CDB_ADDR_IOCPLB                 (0x4000)
#define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA              (0x6000)

#define MPI2_SCSIIO_IOFLAGS_LARGE_CDB               (0x1000)
#define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL           (0x0800)
#define MPI2_SCSIIO_IOFLAGS_MULTICAST               (0x0400)
#define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200)
#define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK          (0x01FF)

/* SCSI IO EEDPFlags bits */

#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG        (0x8000)
#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG        (0x4000)
#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG        (0x2000)
#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG        (0x1000)

#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG          (0x0400)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG          (0x0200)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD           (0x0100)

#define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG       (0x0008)

#define MPI2_SCSIIO_EEDPFLAGS_MASK_OP               (0x0007)
#define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP               (0x0000)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP              (0x0001)
#define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP              (0x0002)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP       (0x0003)
#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP             (0x0004)
#define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP            (0x0006)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP        (0x0007)

/* SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */

/* SCSI IO Control bits */
#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK      (0xFC000000)
#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT     (26)

#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK  (0x03000000)
#define MPI2_SCSIIO_CONTROL_NODATATRANSFER      (0x00000000)
#define MPI2_SCSIIO_CONTROL_WRITE               (0x01000000)
#define MPI2_SCSIIO_CONTROL_READ                (0x02000000)
#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL       (0x03000000)

#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK        (0x00007800)
#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT       (11)

#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK  (0x00000700)
#define MPI2_SCSIIO_CONTROL_SIMPLEQ             (0x00000000)
#define MPI2_SCSIIO_CONTROL_HEADOFQ             (0x00000100)
#define MPI2_SCSIIO_CONTROL_ORDEREDQ            (0x00000200)
#define MPI2_SCSIIO_CONTROL_ACAQ                (0x00000400)

#define MPI2_SCSIIO_CONTROL_TLR_MASK            (0x000000C0)
#define MPI2_SCSIIO_CONTROL_NO_TLR              (0x00000000)
#define MPI2_SCSIIO_CONTROL_TLR_ON              (0x00000040)
#define MPI2_SCSIIO_CONTROL_TLR_OFF             (0x00000080)


/* SCSI IO Error Reply Message */
typedef struct _MPI2_SCSI_IO_REPLY
{
    U16                     DevHandle;                      /* 0x00 */
    U8                      MsgLength;                      /* 0x02 */
    U8                      Function;                       /* 0x03 */
    U16                     Reserved1;                      /* 0x04 */
    U8                      Reserved2;                      /* 0x06 */
    U8                      MsgFlags;                       /* 0x07 */
    U8                      VP_ID;                          /* 0x08 */
    U8                      VF_ID;                          /* 0x09 */
    U16                     Reserved3;                      /* 0x0A */
    U8                      SCSIStatus;                     /* 0x0C */
    U8                      SCSIState;                      /* 0x0D */
    U16                     IOCStatus;                      /* 0x0E */
    U32                     IOCLogInfo;                     /* 0x10 */
    U32                     TransferCount;                  /* 0x14 */
    U32                     SenseCount;                     /* 0x18 */
    U32                     ResponseInfo;                   /* 0x1C */
    U16                     TaskTag;                        /* 0x20 */
    U16                     Reserved4;                      /* 0x22 */
    U32                     BidirectionalTransferCount;     /* 0x24 */
    U32                     Reserved5;                      /* 0x28 */
    U32                     Reserved6;                      /* 0x2C */
} MPI2_SCSI_IO_REPLY, MPI2_POINTER PTR_MPI2_SCSI_IO_REPLY,
  Mpi2SCSIIOReply_t, MPI2_POINTER pMpi2SCSIIOReply_t;

/* SCSI IO Reply SCSIStatus values (SAM-4 status codes) */

#define MPI2_SCSI_STATUS_GOOD                   (0x00)
#define MPI2_SCSI_STATUS_CHECK_CONDITION        (0x02)
#define MPI2_SCSI_STATUS_CONDITION_MET          (0x04)
#define MPI2_SCSI_STATUS_BUSY                   (0x08)
#define MPI2_SCSI_STATUS_INTERMEDIATE           (0x10)
#define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET   (0x14)
#define MPI2_SCSI_STATUS_RESERVATION_CONFLICT   (0x18)
#define MPI2_SCSI_STATUS_COMMAND_TERMINATED     (0x22) /* obsolete */
#define MPI2_SCSI_STATUS_TASK_SET_FULL          (0x28)
#define MPI2_SCSI_STATUS_ACA_ACTIVE             (0x30)
#define MPI2_SCSI_STATUS_TASK_ABORTED           (0x40)

/* SCSI IO Reply SCSIState flags */

#define MPI2_SCSI_STATE_RESPONSE_INFO_VALID     (0x10)
#define MPI2_SCSI_STATE_TERMINATED              (0x08)
#define MPI2_SCSI_STATE_NO_SCSI_STATUS          (0x04)
#define MPI2_SCSI_STATE_AUTOSENSE_FAILED        (0x02)
#define MPI2_SCSI_STATE_AUTOSENSE_VALID         (0x01)

#define MPI2_SCSI_TASKTAG_UNKNOWN               (0xFFFF)


/****************************************************************************
*  SCSI Task Management messages
****************************************************************************/

/* SCSI Task Management Request Message */
typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST
{
    U16                     DevHandle;                      /* 0x00 */
    U8                      ChainOffset;                    /* 0x02 */
    U8                      Function;                       /* 0x03 */
    U8                      Reserved1;                      /* 0x04 */
    U8                      TaskType;                       /* 0x05 */
    U8                      Reserved2;                      /* 0x06 */
    U8                      MsgFlags;                       /* 0x07 */
    U8                      VP_ID;                          /* 0x08 */
    U8                      VF_ID;                          /* 0x09 */
    U16                     Reserved3;                      /* 0x0A */
    U8                      LUN[8];                         /* 0x0C */
    U32                     Reserved4[7];                   /* 0x14 */
    U16                     TaskMID;                        /* 0x30 */
    U16                     Reserved5;                      /* 0x32 */
} MPI2_SCSI_TASK_MANAGE_REQUEST,
  MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REQUEST,
  Mpi2SCSITaskManagementRequest_t,
  MPI2_POINTER pMpi2SCSITaskManagementRequest_t;

/* TaskType values */

#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK           (0x01)
#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET        (0x02)
#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET         (0x03)
#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET   (0x05)
#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET       (0x06)
#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK           (0x07)
#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA              (0x08)
#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET         (0x09)
#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT      (0x0A)

/* obsolete TaskType name */
#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION	\
	(MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT)

/* MsgFlags bits */

#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET    (0x18)
#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET           (0x00)
#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST     (0x08)
#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET  (0x10)

#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU  (0x01)


/* SCSI Task Management Reply Message */
typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY
{
    U16                     DevHandle;                      /* 0x00 */
    U8                      MsgLength;                      /* 0x02 */
    U8                      Function;                       /* 0x03 */
    U8                      ResponseCode;                   /* 0x04 */
    U8                      TaskType;                       /* 0x05 */
    U8                      Reserved1;                      /* 0x06 */
    U8                      MsgFlags;                       /* 0x07 */
    U8                      VP_ID;                          /* 0x08 */
    U8                      VF_ID;                          /* 0x09 */
    U16                     Reserved2;                      /* 0x0A */
    U16                     Reserved3;                      /* 0x0C */
    U16                     IOCStatus;                      /* 0x0E */
    U32                     IOCLogInfo;                     /* 0x10 */
    U32                     TerminationCount;               /* 0x14 */
} MPI2_SCSI_TASK_MANAGE_REPLY,
  MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY,
  Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t;

/* ResponseCode values */

#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE               (0x00)
#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME             (0x02)
#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED          (0x04)
#define MPI2_SCSITASKMGMT_RSP_TM_FAILED                 (0x05)
#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED              (0x08)
#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN            (0x09)
#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC          (0x80)


/****************************************************************************
*  SCSI Enclosure Processor messages
****************************************************************************/

/* SCSI Enclosure Processor Request Message */
typedef struct _MPI2_SEP_REQUEST
{
    U16                     DevHandle;          /* 0x00 */
    U8                      ChainOffset;        /* 0x02 */
    U8                      Function;           /* 0x03 */
    U8                      Action;             /* 0x04 */
    U8                      Flags;              /* 0x05 */
    U8                      Reserved1;          /* 0x06 */
    U8                      MsgFlags;           /* 0x07 */
    U8                      VP_ID;              /* 0x08 */
    U8                      VF_ID;              /* 0x09 */
    U16                     Reserved2;          /* 0x0A */
    U32                     SlotStatus;         /* 0x0C */
    U32                     Reserved3;          /* 0x10 */
    U32                     Reserved4;          /* 0x14 */
    U32                     Reserved5;          /* 0x18 */
    U16                     Slot;               /* 0x1C */
    U16                     EnclosureHandle;    /* 0x1E */
} MPI2_SEP_REQUEST, MPI2_POINTER PTR_MPI2_SEP_REQUEST,
  Mpi2SepRequest_t, MPI2_POINTER pMpi2SepRequest_t;

/* Action defines */
#define MPI2_SEP_REQ_ACTION_WRITE_STATUS                (0x00)
#define MPI2_SEP_REQ_ACTION_READ_STATUS                 (0x01)

/* Flags defines */
#define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS            (0x00)
#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS       (0x01)

/* SlotStatus defines */
#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE          (0x00040000)
#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST        (0x00020000)
#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED         (0x00000200)
#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE               (0x00000100)
#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED            (0x00000080)
#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT         (0x00000040)
#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY       (0x00000010)
#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY         (0x00000008)
#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING          (0x00000004)
#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY              (0x00000002)
#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR                (0x00000001)


/* SCSI Enclosure Processor Reply Message */
typedef struct _MPI2_SEP_REPLY
{
    U16                     DevHandle;          /* 0x00 */
    U8                      MsgLength;          /* 0x02 */
    U8                      Function;           /* 0x03 */
    U8                      Action;             /* 0x04 */
    U8                      Flags;              /* 0x05 */
    U8                      Reserved1;          /* 0x06 */
    U8                      MsgFlags;           /* 0x07 */
    U8                      VP_ID;              /* 0x08 */
    U8                      VF_ID;              /* 0x09 */
    U16                     Reserved2;          /* 0x0A */
    U16                     Reserved3;          /* 0x0C */
    U16                     IOCStatus;          /* 0x0E */
    U32                     IOCLogInfo;         /* 0x10 */
    U32                     SlotStatus;         /* 0x14 */
    U32                     Reserved4;          /* 0x18 */
    U16                     Slot;               /* 0x1C */
    U16                     EnclosureHandle;    /* 0x1E */
} MPI2_SEP_REPLY, MPI2_POINTER PTR_MPI2_SEP_REPLY,
  Mpi2SepReply_t, MPI2_POINTER pMpi2SepReply_t;

/* SlotStatus defines */
#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY          (0x00040000)
#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST      (0x00020000)
#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED       (0x00000200)
#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE             (0x00000100)
#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED          (0x00000080)
#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT       (0x00000040)
#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY     (0x00000010)
#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY       (0x00000008)
#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING        (0x00000004)
#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY            (0x00000002)
#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR              (0x00000001)


#endif