gflt400: initial support for Bolt
- Add boardID / GPIOs
- Add def_config (copied from gflt110)
- Add convenience is_fiber_jack functions
Change-Id: I89a5e2c9ead4cfa2d68fe7416a84407337677631
diff --git a/arch/arm/configs/gflt400_defconfig b/arch/arm/configs/gflt400_defconfig
new file mode 100644
index 0000000..15738cc
--- /dev/null
+++ b/arch/arm/configs/gflt400_defconfig
@@ -0,0 +1,1797 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32.11
+# Thu May 14 10:38:17 2015
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_PRINTK_PERSIST=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_FEROCEON_ORION is not set
+# CONFIG_ARCH_FEROCEON_KW is not set
+CONFIG_ARCH_FEROCEON_KW2=y
+# CONFIG_ARCH_FEROCEON_MV78XX0 is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# Feroceon SoC options
+#
+CONFIG_MV88F6500=y
+# CONFIG_MACH_GFLT200 is not set
+CONFIG_MACH_GFLT110=y
+# CONFIG_JTAG_DEBUG is not set
+
+#
+# Feroceon SoC Included Features
+#
+CONFIG_MV_NAND_SUPPORT=y
+CONFIG_MV_INCLUDE_PEX=y
+CONFIG_MV_INCLUDE_USB=y
+CONFIG_MV_INCLUDE_XOR=y
+# CONFIG_MV_INCLUDE_CESA is not set
+# CONFIG_MV_INCLUDE_NFC is not set
+CONFIG_MV_INCLUDE_LEGACY_NAND=y
+# CONFIG_MV_INCLUDE_INTEG_SATA is not set
+CONFIG_MV_INCLUDE_TDM=y
+CONFIG_MV_INCLUDE_GIG_ETH=y
+CONFIG_MV_INCLUDE_SPI=y
+CONFIG_MV_INCLUDE_SDIO=y
+# CONFIG_MV_INCLUDE_TS is not set
+CONFIG_MV_INCLUDE_PON=y
+CONFIG_MV_INCLUDE_TPM=y
+CONFIG_MV_INCLUDE_CPH=y
+CONFIG_MV_INCLUDE_SWITCH=y
+CONFIG_MV_GPP_MAX_PINS=70
+CONFIG_MV_DCACHE_SIZE=0x4000
+CONFIG_MV_ICACHE_SIZE=0x4000
+
+#
+# Feroceon SoC MTD support
+#
+CONFIG_MV_FLASH_CTRL=y
+CONFIG_MV_INCLUDE_SFLASH_MTD=y
+# CONFIG_MTD_NAND_LNC is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+CONFIG_USE_DSP=y
+CONFIG_MV_SP_I_FTCH_DB_INV=y
+# CONFIG_MV_SP_I_FTCH_LCK_L2_ICACHE is not set
+# CONFIG_MV_SP_I_FTCH_NONE is not set
+# CONFIG_MV_INTERNAL_REGS_SELECTIVE_MAPPING is not set
+CONFIG_FEROCEON_PROC=y
+CONFIG_UBOOT_STRUCT=y
+# CONFIG_MV_DBG_TRACE is not set
+CONFIG_MV_REAL_TIME=y
+# CONFIG_MV_CPU_PERF_CNTRS is not set
+# CONFIG_MV_CPU_L2_PERF_CNTRS is not set
+
+#
+# Power-Management options
+#
+CONFIG_MV_PMU_PROC=y
+CONFIG_MV_PM_IDLE_WFI_SR=y
+# CONFIG_MV_PM_IDLE_DEEPIDLE_SR is not set
+
+#
+# Soc DMA accelerations
+#
+# CONFIG_MV_USE_XOR_ENGINE is not set
+
+#
+# SoC Networking support
+#
+CONFIG_MV_ETHERNET=y
+# CONFIG_MV_ETH_LEGACY is not set
+CONFIG_MV_ETH_NETA=y
+CONFIG_MV_ETH_PORTS_NUM=3
+CONFIG_MV_ETH_0_MTU=1500
+CONFIG_MV_ETH_0_MACADDR="00:00:00:00:00:80"
+CONFIG_MV_ETH_1_MTU=1500
+CONFIG_MV_ETH_1_MACADDR="00:00:00:00:00:81"
+CONFIG_MV_ETH_2_MTU=1500
+CONFIG_MV_ETH_2_MACADDR="00:00:00:00:00:82"
+CONFIG_MV_ETH_RXQ=8
+CONFIG_MV_ETH_TXQ=8
+# CONFIG_MV_ETH_TSO is not set
+CONFIG_MV_ETH_TOOL=y
+# CONFIG_MV_LINUX_COUNTERS_DISABLE is not set
+CONFIG_NET_SKB_HEADROOM=96
+CONFIG_NET_SKB_RECYCLE=y
+CONFIG_NET_SKB_RECYCLE_DEF=1
+# CONFIG_MV_ETH_NFP is not set
+
+#
+# BM configuration
+#
+CONFIG_MV_ETH_BM=y
+# CONFIG_MV_ETH_BM_CPU is not set
+CONFIG_MV_ETH_BM_0_PKT_SIZE=2016
+CONFIG_MV_ETH_BM_1_PKT_SIZE=256
+CONFIG_MV_ETH_BM_2_PKT_SIZE=2016
+CONFIG_MV_ETH_BM_3_PKT_SIZE=256
+CONFIG_MV_ETH_BM_PORT_0=y
+CONFIG_MV_ETH_BM_PORT_0_LONG_POOL=0
+CONFIG_MV_ETH_BM_PORT_0_SHORT_POOL=1
+CONFIG_MV_ETH_BM_PORT_0_LONG_BUF_NUM=2048
+CONFIG_MV_ETH_BM_PORT_0_SHORT_BUF_NUM=4096
+CONFIG_MV_ETH_BM_PORT_1=y
+CONFIG_MV_ETH_BM_PORT_1_LONG_POOL=0
+CONFIG_MV_ETH_BM_PORT_1_SHORT_POOL=1
+CONFIG_MV_ETH_BM_PORT_1_LONG_BUF_NUM=2048
+CONFIG_MV_ETH_BM_PORT_1_SHORT_BUF_NUM=4096
+CONFIG_MV_ETH_BM_PORT_2=y
+CONFIG_MV_ETH_BM_PORT_2_LONG_POOL=2
+CONFIG_MV_ETH_BM_PORT_2_SHORT_POOL=3
+CONFIG_MV_ETH_BM_PORT_2_LONG_BUF_NUM=2048
+CONFIG_MV_ETH_BM_PORT_2_SHORT_BUF_NUM=4096
+CONFIG_MV_ETH_PNC=y
+CONFIG_MV_PNC_TCAM_LINES=512
+CONFIG_MV_ETH_PNC_MCAST_NUM=8
+CONFIG_MV_ETH_PNC_VLAN_PRIO=7
+CONFIG_MV_ETH_PNC_ETYPE=0
+CONFIG_MV_ETH_PNC_DSCP_PRIO=4
+# CONFIG_MV_ETH_PNC_L3_FLOW is not set
+# CONFIG_MV_ETH_PNC_WOL is not set
+CONFIG_MV_ETH_HWF=y
+CONFIG_MV_ETH_HWF_TXQ_DROP=60
+CONFIG_MV_ETH_HWF_TXQ_DROP_RND=0
+CONFIG_MV_ETH_PMT=y
+CONFIG_MV_ETH_PMT_FLOWS=256
+CONFIG_MV_ETH_PMT_CMD_PER_FLOW=12
+
+#
+# Network Interface configuration
+#
+
+#
+# Rx/Tx Queue configuration
+#
+CONFIG_MV_ETH_RXQ_DESC=128
+CONFIG_MV_ETH_RXQ_DEF=0
+CONFIG_MV_ETH_TXQ_DESC=3072
+CONFIG_MV_ETH_TXQ_DEF=0
+
+#
+# IP/TCP/UDP Offloading
+#
+CONFIG_MV_ETH_TX_CSUM_OFFLOAD=y
+CONFIG_MV_ETH_TX_CSUM_OFFLOAD_DEF=y
+CONFIG_MV_ETH_RX_CSUM_OFFLOAD=y
+CONFIG_MV_ETH_RX_CSUM_OFFLOAD_DEF=y
+# CONFIG_MV_ETH_GRO is not set
+
+#
+# Control and Statistics
+#
+# CONFIG_MV_ETH_DEBUG_CODE is not set
+CONFIG_MV_ETH_STAT_ERR=y
+CONFIG_MV_ETH_STAT_INF=y
+CONFIG_MV_ETH_STAT_DBG=y
+# CONFIG_MV_ETH_STAT_DIST is not set
+
+#
+# Advanced Features
+#
+CONFIG_MV_ETH_TX_DONE_TIMER_PERIOD=10
+CONFIG_MV_ETH_CLEANUP_TIMER_PERIOD=10
+# CONFIG_MV_ETH_TXDONE_ISR is not set
+CONFIG_MV_ETH_TXDONE_COAL_PKTS=16
+CONFIG_MV_ETH_RX_COAL_PKTS=32
+CONFIG_MV_ETH_RX_COAL_USEC=100
+# CONFIG_MV_ETH_RX_DESC_PREFETCH is not set
+# CONFIG_MV_ETH_RX_PKT_PREFETCH is not set
+CONFIG_MV_ETH_RX_SPECIAL=y
+CONFIG_MV_ETH_TX_SPECIAL=y
+# CONFIG_MV_ETH_L2FW is not set
+CONFIG_MV_ETH_RX_POLL_WEIGHT=64
+CONFIG_MV_ETH_EXTRA_BUF_SIZE=120
+CONFIG_MV_ETH_EXTRA_BUF_NUM=532
+
+#
+# NFP support
+#
+
+#
+# NAPI GROUPS
+#
+CONFIG_MV_ETH_NAPI_GROUPS=1
+
+#
+# Group 0
+#
+CONFIG_MV_ETH_GROUP0_CPU=0x1
+CONFIG_MV_ETH_GROUP0_RXQ=0xff
+
+#
+# PON support for Network driver
+#
+CONFIG_MV_PON=y
+CONFIG_MV_PON_TXP_DEF=0
+CONFIG_MV_PON_TXQ_DEF=0
+
+#
+# Switch support
+#
+CONFIG_MV_ETH_SWITCH=y
+CONFIG_MV_ETH_SWITCH_NETDEV_NUM=6
+CONFIG_MV_ETH_SWITCH_NETCONFIG_0="3,(00:11:66:11:66:11,0)(00:22:77:22:77:22,1:2:3:4),mtu=1500"
+CONFIG_MV_ETH_SWITCH_NETCONFIG_1="0"
+CONFIG_MV_ETH_SWITCH_LINK=y
+
+#
+# ERRATA / WA
+#
+# CONFIG_MV_ETH_6601_LB_WA is not set
+
+#
+# Telephony options
+#
+
+#
+# SoC CPH support
+#
+CONFIG_MV_CPH=y
+
+#
+# CPH Driver Options
+#
+CONFIG_MV_CPH_IGMP_HANDLE=y
+CONFIG_MV_CPH_MLD_HANDLE=y
+CONFIG_MV_CPH_BC_HANDLE=y
+# CONFIG_MV_CPH_UDP_SAMPLE_HANDLE is not set
+CONFIG_MV_CPH_FLOW_MAP_HANDLE=y
+
+#
+# SoC PON support
+#
+CONFIG_MV_PON_TCONTS=8
+CONFIG_MV_EPON_LLID=1
+# CONFIG_PON_Z1 is not set
+CONFIG_PON_Z2=y
+# CONFIG_PON_FPGA is not set
+CONFIG_MV_GPON=y
+CONFIG_MV_EPON=y
+
+#
+# GPON Driver Options
+#
+CONFIG_MV_GPON_HW_INTERRUPT=y
+CONFIG_MV_GPON_DEBUG_PRINT=y
+CONFIG_MV_GPON_STATIC_GEM_PORT=y
+# CONFIG_MV_GPON_PERFORMANCE_CHECK is not set
+
+#
+# EPON Driver Options
+#
+CONFIG_MV_EPON_HW_INTERRUPT=y
+CONFIG_MV_EPON_DBA_LOW_RATE_VALUE=2000
+CONFIG_MV_EPON_DBA_LOW_RATE_THRESHOLD=20
+CONFIG_MV_EPON_DBA_LOW_RATE_CONST_VALUE=256
+CONFIG_MV_EPON_DBA_HIGH_RATE_THRESHOLD=8192
+CONFIG_MV_EPON_DBA_HIGH_RATE_VALUE=2000
+
+#
+# SoC TPM support
+#
+CONFIG_MV_TPM=y
+
+#
+# TPM Driver Options
+#
+# CONFIG_MV_TPM_Z1_VER is not set
+CONFIG_MV_TPM_Z2_VER=y
+# CONFIG_MV_TPM_FPGA_VER is not set
+CONFIG_MV_TPM_INT_LOCK=y
+# CONFIG_MV_TPM_DEBUG_PRINT is not set
+# CONFIG_MV_TPM_SFS_2_IOCTL is not set
+CONFIG_MV_TPM_SYSFS_HELP=y
+
+#
+# SoC MAC learning support
+#
+CONFIG_MV_MAC_LEARN=y
+# CONFIG_PCIE_VIRTUAL_BRIDGE_SUPPORT is not set
+# CONFIG_MV_UART_POLLING_MODE is not set
+# CONFIG_MV_PRINTK_SLICE_SUPPORT is not set
+CONFIG_MV_DRAM_DEFAULT_ACCESS_CFG=y
+# CONFIG_MV_DRAM_FASTPATH_ACCESS_CFG is not set
+# CONFIG_MV_DRAM_XBAR_ACCESS_CFG is not set
+CONFIG_ARCH_FEROCEON=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_FEROCEON=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_ARMV5_L2_CACHE_COHERENCY_FIX=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+CONFIG_REORDER=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CMDLINE="console=ttyS0,115200 log_buf_len=1048576"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_FEROCEON_KW2 is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_CMD="nand_mtd:0x200000@0x0(uboot)ro,0x400000@0x200000(uimageU),-@0x600000(rootfsU)"
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=24576
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MV_SCATTERED_SPINUP is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000E=y
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_SK98LIN=y
+# CONFIG_SK98LIN_NAPI is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=y
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+CONFIG_THERMAL_SENSOR_KW2=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_ORION_WATCHDOG=y
+# CONFIG_ALIM7101_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_MVSDIO=y
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_LEDS_TRIGGER_DONT_CLOBBER_BRIGHTNESS=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8523 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_LZMA=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZMA_NEEDED=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/mach-feroceon-kw2/Makefile b/arch/arm/mach-feroceon-kw2/Makefile
index a71da62..a5c920d 100755
--- a/arch/arm/mach-feroceon-kw2/Makefile
+++ b/arch/arm/mach-feroceon-kw2/Makefile
@@ -242,6 +242,7 @@
feroceon-$(CONFIG_THERMAL_SENSOR_KW2) += hwmon.o
# Board
+obj-y += gflt.o
obj-$(CONFIG_MACH_GFLT200) += board-gflt200.o
obj-$(CONFIG_MACH_GFLT110) += board-gflt110.o
diff --git a/arch/arm/mach-feroceon-kw2/board-gflt110.c b/arch/arm/mach-feroceon-kw2/board-gflt110.c
index 8d1b5d2..3e16484 100644
--- a/arch/arm/mach-feroceon-kw2/board-gflt110.c
+++ b/arch/arm/mach-feroceon-kw2/board-gflt110.c
@@ -11,6 +11,8 @@
#include <linux/sysfs.h>
#include <linux/ctype.h>
+#include "gflt.h"
+
#define GPIO_PON_PWR_EN 37
struct gflt_led_data {
@@ -24,12 +26,21 @@
const char *label;
};
-static struct board_gpio board_gpios[] = {
+static struct board_gpio gflt110_board_gpios[] = {
{
.gpio = GPIO_PON_PWR_EN,
.label = "power-enable",
},
};
+static struct board_gpio gflt300_board_gpios[] = {
+ {
+ .gpio = GPIO_PON_PWR_EN,
+ .label = "power-enable",
+ },
+};
+static struct board_gpio gflt400_board_gpios[] = {
+// GFLT400 doesn't use Pin 37 (NC)
+};
static int board_gpio_export(struct board_gpio *gpio, struct device *dev, char *boardName)
{
@@ -120,6 +131,27 @@
},
};
+static struct gflt_led_data gflt400_board_gpio_leds[] = {
+ {
+ .gpio = 9,
+ .active_low = 1,
+ .cdev = {
+ .name = "sys-blue",
+ .brightness_set = gflt_led_brightness_set,
+ .max_brightness = 100,
+ },
+ },
+ {
+ .gpio = 10,
+ .active_low = 1,
+ .cdev = {
+ .name = "sys-red",
+ .brightness_set = gflt_led_brightness_set,
+ .max_brightness = 100,
+ },
+ },
+};
+
static void gflt_led_brightness_set(struct led_classdev *led_cdev,
enum led_brightness enum_brightness)
{
@@ -191,11 +223,13 @@
char c;
struct gflt_led_data *led_data;
int led_data_max;
+ struct board_gpio *board_gpios;
+ int board_gpios_len;
boardID = mvBoardIdGet();
- if ((boardID != GFLT300_ID) && (boardID != GFLT110_ID)) {
+ if (!gfiber_is_any_jack()) {
printk("Unsupported board id:%d\n", boardID);
return -1;
}
@@ -229,18 +263,33 @@
if (rc)
pr_err("%s: error %d creating attribute 'hw_ver'\n", boardName, rc);
- led_data = gflt110_board_gpio_leds;
- led_data_max = ARRAY_SIZE(gflt110_board_gpio_leds);
- if (boardID == GFLT300_ID) {
+ if (boardID == GFLT110_ID) {
+ led_data = gflt110_board_gpio_leds;
+ led_data_max = ARRAY_SIZE(gflt110_board_gpio_leds);
+ } else if (boardID == GFLT300_ID) {
led_data = gflt300_board_gpio_leds;
led_data_max = ARRAY_SIZE(gflt300_board_gpio_leds);
+ } else if (boardID == GFLT400_ID) {
+ led_data = gflt400_board_gpio_leds;
+ led_data_max = ARRAY_SIZE(gflt400_board_gpio_leds);
}
+
rc = register_gfltleds(pdev, led_data, led_data_max);
if (rc)
pr_err("%s: error %d registering GFLT LED device\n", boardName, rc);
+ if (boardID == GFLT110_ID) {
+ board_gpios = gflt110_board_gpios;
+ board_gpios_len = ARRAY_SIZE(gflt110_board_gpios);
+ } else if (boardID == GFLT300_ID) {
+ board_gpios = gflt300_board_gpios;
+ board_gpios_len = ARRAY_SIZE(gflt300_board_gpios);
+ } else if (boardID == GFLT400_ID) {
+ board_gpios = gflt400_board_gpios;
+ board_gpios_len = ARRAY_SIZE(gflt400_board_gpios);
+ }
/* /sys/devices/platform/board/<gpio_name> */
- for (i = 0; i < ARRAY_SIZE(board_gpios); i++)
+ for (i = 0; i < board_gpios_len; i++)
board_gpio_export(&board_gpios[i], &pdev->dev, boardName);
diff --git a/arch/arm/mach-feroceon-kw2/gflt.c b/arch/arm/mach-feroceon-kw2/gflt.c
new file mode 100644
index 0000000..1d492c0
--- /dev/null
+++ b/arch/arm/mach-feroceon-kw2/gflt.c
@@ -0,0 +1,19 @@
+#include "boardEnv/mvBoardEnvLib.h"
+#include "boardEnv/mvBoardEnvSpec.h"
+#include "gflt.h"
+
+int gfiber_is_fiber_jack(void) {
+ MV_U32 boardId = mvBoardIdGet();
+ return boardId == GFLT110_ID ||
+ boardId == GFLT200_ID ||
+ boardId == GFLT300_ID;
+}
+
+int gfiber_is_coax_jack(void) {
+ MV_U32 boardId = mvBoardIdGet();
+ return boardId == GFLT400_ID;
+}
+
+int gfiber_is_any_jack(void) {
+ return gfiber_is_fiber_jack() || gfiber_is_coax_jack;
+}
diff --git a/arch/arm/mach-feroceon-kw2/gflt.h b/arch/arm/mach-feroceon-kw2/gflt.h
new file mode 100644
index 0000000..f9a2afb
--- /dev/null
+++ b/arch/arm/mach-feroceon-kw2/gflt.h
@@ -0,0 +1,6 @@
+#ifndef _FEROCEON_GFLT_H_
+#define _FEROCEON_GFLT_H_
+int gfiber_is_fiber_jack(void);
+int gfiber_is_coax_jack(void);
+int gfiber_is_any_jack(void);
+#endif /* _FEROCEON_GFLT_H_ */
diff --git a/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvLib.c b/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvLib.c
index 8774fcc..f358f00 100755
--- a/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvLib.c
+++ b/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvLib.c
@@ -62,6 +62,7 @@
*******************************************************************************/
+#include "gflt.h"
#include "ctrlEnv/mvCtrlEnvLib.h"
#include "ctrlEnv/mvCtrlEnvSpec.h"
#include "boardEnv/mvBoardEnvLib.h"
@@ -160,7 +161,7 @@
MV_REG_WRITE(GPP_DATA_OUT_REG(1), BOARD_INFO(boardId)->gppOutValMid);
if (boardId != DB_88F6601_BP_ID && boardId != RD_88F6601_MC_ID &&
boardId != RD_88F6601_MC2L_ID &&
- boardId != GFLT300_ID && boardId != GFLT200_ID && boardId != GFLT110_ID)
+ !gfiber_is_any_jack())
MV_REG_WRITE(GPP_DATA_OUT_REG(2), BOARD_INFO(boardId)->gppOutValHigh);
/* set GPP polarity */
@@ -168,7 +169,7 @@
mvGppPolaritySet(1, 0xFFFFFFFF, BOARD_INFO(boardId)->gppPolarityValMid);
if (boardId != DB_88F6601_BP_ID && boardId != RD_88F6601_MC_ID &&
boardId != RD_88F6601_MC2L_ID &&
- boardId != GFLT300_ID && boardId != GFLT200_ID && boardId != GFLT110_ID)
+ !gfiber_is_any_jack())
mvGppPolaritySet(2, 0xFFFFFFFF, BOARD_INFO(boardId)->gppPolarityValHigh);
/* Set GPP Out Enable */
@@ -176,7 +177,7 @@
mvGppTypeSet(1, 0xFFFFFFFF, BOARD_INFO(boardId)->gppOutEnValMid);
if (boardId != DB_88F6601_BP_ID && boardId != RD_88F6601_MC_ID &&
boardId != RD_88F6601_MC2L_ID &&
- boardId != GFLT300_ID && boardId != GFLT200_ID && boardId != GFLT110_ID)
+ !gfiber_is_any_jack())
mvGppTypeSet(2, 0xFFFFFFFF, BOARD_INFO(boardId)->gppOutEnValHigh);
}
@@ -355,7 +356,7 @@
return MV_FALSE;
}
if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
- GFLT300_ID == boardId || GFLT200_ID == boardId || GFLT110_ID == boardId)
+ gfiber_is_any_jack())
return MV_FALSE;
if ((ethPortNum > 0) || (ethCompOpt & ESC_OPT_SGMII_2_SW_P1))
@@ -655,7 +656,7 @@
}
if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
boardId == DB_88F6601_BP_ID ||
- GFLT300_ID == boardId || GFLT200_ID == boardId || GFLT110_ID == boardId)
+ gfiber_is_any_jack())
return 0;
@@ -1255,7 +1256,7 @@
tmpTClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET(0));
if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
boardId == DB_88F6601_BP_ID ||
- GFLT300_ID == boardId || GFLT200_ID == boardId || GFLT110_ID == boardId) {
+ gfiber_is_any_jack()) {
tmpTClkRate &= MSAR_TCLCK_6601_MASK;
if (tmpTClkRate)
return MV_BOARD_TCLK_200MHZ;
@@ -1312,7 +1313,7 @@
i = 0;
if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
boardId == DB_88F6601_BP_ID ||
- GFLT300_ID == boardId || GFLT200_ID == boardId || GFLT110_ID == boardId) {
+ gfiber_is_any_jack()) {
while (cpuDdrTbl6601[i].satrValue != -1) {
if (cpuDdrTbl6601[i].satrValue == clockSatr) {
res = i;
@@ -1722,7 +1723,7 @@
if (boardId != DB_88F6601_BP_ID && boardId != RD_88F6601_MC_ID &&
boardId != RD_88F6601_MC2L_ID &&
- boardId != GFLT300_ID && boardId != GFLT200_ID && boardId != GFLT110_ID) {
+ !gfiber_is_any_jack()) {
/* KW2 only */
/* Update link speed for MAC0 / 1 */
/* If MAC 0 is connected to switch, then set to speed 1000Mbps */
@@ -2354,7 +2355,7 @@
return MV_FALSE;
}
if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
- GFLT300_ID == boardId || GFLT200_ID == boardId || GFLT110_ID == boardId) {
+ gfiber_is_any_jack()) {
if (ethPortNum == 0)
return MV_TRUE;
return MV_FALSE;
@@ -2760,6 +2761,8 @@
#elif defined(DB_CUSTOMER)
tmpBoardId = DB_CUSTOMER_ID;
+#elif defined(GFLT400)
+ tmpBoardId = GFLT400_ID;
#elif defined(GFLT200)
tmpBoardId = GFLT200_ID;
#elif defined(GFLT110)
diff --git a/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.c b/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.c
index da19730..7b41233 100755
--- a/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.c
+++ b/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.c
@@ -1728,6 +1728,144 @@
.moduleAutoDetect = MV_FALSE
};
+/***************************************************************************
+** GFLT400
+****************************************************************************/
+
+MV_BOARD_TWSI_INFO gflt400InfoBoardTwsiDev[] = {
+ /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */
+};
+
+MV_BOARD_MAC_INFO gflt400InfoBoardMacInfo[] = {
+ /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+ {BOARD_MAC_SPEED_AUTO, 0x0},
+ {BOARD_MAC_SPEED_AUTO, 0x1},
+ {N_A,N_A}
+};
+
+MV_BOARD_MPP_TYPE_INFO gflt400InfoBoardMppTypeInfo[] = {
+ {
+ .boardMppTdm = MV_BOARD_AUTO,
+ .ethSataComplexOpt = ESC_OPT_GEPHY_MAC0,
+ .ethPortsMode = 0x0
+ }
+};
+
+MV_BOARD_GPP_INFO gflt400InfoBoardGppInfo[] = {
+ /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */
+ {BOARD_GPP_PON_XVR_TX, 17},
+ {BOARD_GPP_PON_XVR_TX_POWER, 11},
+ {BOARD_GPP_PON_XVR_TX_IND, 24},
+};
+
+
+MV_DEV_CS_INFO gflt400InfoBoardDeCsInfo[] = {
+ /*{deviceCS, params, devType, devWidth} */
+#ifdef MV_SPI
+ {SPI_CS0, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */
+#endif
+#if !defined(MV_SPI)
+ {N_A, N_A, N_A, N_A} /* No device */
+#endif
+};
+
+MV_BOARD_MPP_INFO gflt400InfoBoardMppConfigValue[] = {
+ {{
+ GFLT400_MPP0_7,
+ GFLT400_MPP8_15,
+ GFLT400_MPP16_23,
+ GFLT400_MPP24_31,
+ GFLT400_MPP32_37
+ }
+ }
+};
+
+#if 0
+static MV_VOID gflt400BoardEgigaPhyInit(MV_BOARD_INFO *pBoardInfo)
+{
+ MV_U16 value = 0;
+ /* pass led control to internal phy */
+ MV_REG_WRITE(LED_MATRIX_CTRL_REG(0), 0x82);
+
+ /* link = mpp 14 = c2 = phy led[2] */
+ /* data = mpp 26 = c1 = phy led[1] */
+ mvEthPhyRegWrite(0, 22, 3);
+ mvEthPhyRegRead(0, 16, &value);
+ value = (value & ~0xff) | 0x37;
+ mvEthPhyRegWrite(0, 16, value);
+ mvEthPhyRegWrite(0, 22, 0);
+}
+
+#endif
+
+MV_BOARD_INFO gflt400Info = {
+ .boardName = "GFLT400",
+ .pBoardInit = NULL,
+ //.pBoardEgigaPhyInit = gflt400BoardEgigaPhyInit,
+ .numBoardMppTypeValue = MV_ARRAY_SIZE(gflt400InfoBoardMppTypeInfo),
+ .pBoardMppTypeValue = gflt400InfoBoardMppTypeInfo,
+ .numBoardMppConfigValue = MV_ARRAY_SIZE(gflt400InfoBoardMppConfigValue),
+ .pBoardMppConfigValue = gflt400InfoBoardMppConfigValue,
+ .intsGppMaskLow = 0,
+ .intsGppMaskMid = 0,
+ .intsGppMaskHigh = 0,
+ .numBoardDeviceIf = MV_ARRAY_SIZE(gflt400InfoBoardDeCsInfo),
+ .pDevCsInfo = gflt400InfoBoardDeCsInfo,
+ .numBoardTwsiDev = MV_ARRAY_SIZE(gflt400InfoBoardTwsiDev),
+ .pBoardTwsiDev = gflt400InfoBoardTwsiDev,
+ .numBoardMacInfo = MV_ARRAY_SIZE(gflt400InfoBoardMacInfo),
+ .pBoardMacInfo = gflt400InfoBoardMacInfo,
+ .numBoardGppInfo = MV_ARRAY_SIZE(gflt400InfoBoardGppInfo),
+ .pBoardGppInfo = gflt400InfoBoardGppInfo,
+ .activeLedsNumber = 0,
+ .pLedGppPin = NULL,
+ .ledsPolarity = 0,
+
+ /* GPP values */
+ .gppOutEnValLow = GFLT400_GPP_OUT_ENA_LOW,
+ .gppOutEnValMid = GFLT400_GPP_OUT_ENA_MID,
+ .gppOutEnValHigh = 0,
+ .gppOutValLow = GFLT400_GPP_OUT_VAL_LOW,
+ .gppOutValMid = GFLT400_GPP_OUT_VAL_MID,
+ .gppOutValHigh = 0,
+ .gppPolarityValLow = GFLT400_GPP_POL_LOW,
+ .gppPolarityValMid = GFLT400_GPP_POL_MID,
+ .gppPolarityValHigh = 0,
+
+ /* External Switch Configuration */
+ .pSwitchInfo = NULL,
+ .switchInfoNum = 0,
+
+ /* PON configuration. */
+ .ponConfigValue = BOARD_GPON_CONFIG,
+
+ /* TDM configuration */
+ /* We hold a different configuration array for each possible slic that
+ ** can be connected to board.
+ ** When modules are scanned, then we select the index of the relevant
+ ** slic's information array.
+ ** For RD and Customers boards we only need to initialize a single
+ ** entry of the arrays below, and set the boardTdmInfoIndex to 0.
+ */
+ .numBoardTdmInfo = {0},
+ .pBoardTdmInt2CsInfo = {NULL},
+ .boardTdmInfoIndex = -1,
+
+ .pBoardSpecInit = NULL, /* gflt400BoardSpecInit, */
+
+ .deepIdlePwrUpDelay = 2400, /* 12uS */
+
+ /* NAND init params */
+ .nandFlashParamsValid = MV_FALSE,
+ .nandFlashReadParams = 0,
+ .nandFlashWriteParams = 0,
+ .nandFlashControl = 0,
+ .pBoardTdmSpiInfo = NULL,
+
+ /* Enable modules auto-detection. */
+ .moduleAutoDetect = MV_FALSE
+};
+
MV_BOARD_INFO *boardInfoTbl[] = {
&db88f6535Info,
&rd88f6510Info,
@@ -1740,4 +1878,5 @@
&gflt110Info,
&rd88f6601MC2LInfo,
&gflt300Info,
+ &gflt400Info,
};
diff --git a/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.h b/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.h
index ca3a8c9..b739ac7 100755
--- a/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.h
+++ b/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.h
@@ -116,7 +116,8 @@
#define GFLT110_ID (BOARD_ID_BASE+0x8)
#define RD_88F6601_MC2L_ID (BOARD_ID_BASE+0x9)
#define GFLT300_ID (BOARD_ID_BASE+0xA)
-#define MV_MAX_BOARD_ID (DB_CUSTOMER_ID + 4)
+#define GFLT400_ID (BOARD_ID_BASE+0xB)
+#define MV_MAX_BOARD_ID (DB_CUSTOMER_ID + 5)
// These are Marvells defines, we should switch to match these in
// uboot to make future merges easier.
//#define DB_CUSTOMER_ID (BOARD_ID_BASE+0x8)
@@ -642,6 +643,50 @@
#define GFLT300_GPP_POL_LOW (BIT17)
#define GFLT300_GPP_POL_MID 0x0
+/***************************************************************************
+** GFLT400 - Copied from Uboot
+****************************************************************************/
+/* GPIO settings for GFLT400: http://go/gflt400-gpio-config */
+
+/* GPPs
+ 0 GHN_RESET_N_L
+ 1 SPI_MOSI
+ 2 SPI_CLK
+ 3 SPI_CS_L
+ 4 SPI_MISO
+ 7 UART0_TX
+ 8 UART0_RX
+ 9 LED_BLUE_L
+ 10 LED_RED_L
+ 13 BOARD_VER[0]
+ 14 GE_LINK_RED
+ 15 BOARD_VER[1]
+ 17 SW_RESET
+ 18 BOARD_VER[2]
+ 20 DYING_GASP_INT_R2
+ 26 GE_DATA_LED
+ 28 SPI_WP_L(out)
+ 33 DYING_GASP_INT_R
+*/
+
+#define GFLT400_MPP0_7 0x20022220
+#define GFLT400_MPP8_15 0x05000002
+#define GFLT400_MPP16_23 0x00000000
+#define GFLT400_MPP24_31 0x00000500
+#define GFLT400_MPP32_37 0x00000000
+
+/* Default all ones-inputs, invert for outputs */
+#define GFLT400_GPP_OUT_ENA_LOW (~(BIT9 | BIT10))
+#define GFLT400_GPP_OUT_ENA_MID 0x0
+
+/* BIT09 turns the LED blue.
+ * BIT10 turns the LED red. */
+#define GFLT400_GPP_OUT_VAL_LOW (BIT9)
+#define GFLT400_GPP_OUT_VAL_MID (0)
+
+/* GFLT400 has the reset button signal inverted */
+#define GFLT400_GPP_POL_LOW (BIT17)
+#define GFLT400_GPP_POL_MID 0x0
/***************************************************************************
** RD-88F6601MC2L
diff --git a/arch/arm/mach-feroceon-kw2/kw2_family/cpu/mvCpu.c b/arch/arm/mach-feroceon-kw2/kw2_family/cpu/mvCpu.c
index 1508074..3155d5a 100755
--- a/arch/arm/mach-feroceon-kw2/kw2_family/cpu/mvCpu.c
+++ b/arch/arm/mach-feroceon-kw2/kw2_family/cpu/mvCpu.c
@@ -62,6 +62,7 @@
*******************************************************************************/
+#include "gflt.h"
#include "cpu/mvCpu.h"
#include "ctrlEnv/mvCtrlEnvLib.h"
#include "ctrlEnv/mvCtrlEnvRegs.h"
@@ -113,7 +114,7 @@
i = 0;
if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
boardId == DB_88F6601_BP_ID ||
- GFLT300_ID == boardId || GFLT200_ID == boardId || GFLT110_ID == boardId) {
+ gfiber_is_any_jack()) {
while (cpuDdrTbl6601[i].satrValue != -1) {
if (cpuDdrTbl6601[i].satrValue == clockSatr) {
res = i;
@@ -161,9 +162,10 @@
if (idx == 0xFFFFFFFF)
return 0;
else {
- if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
+ if (boardId == RD_88F6601_MC_ID ||
+ boardId == RD_88F6601_MC2L_ID ||
boardId == DB_88F6601_BP_ID ||
- (GFLT300_ID == boardId) || (GFLT200_ID == boardId) || (GFLT110_ID == boardId))
+ gfiber_is_any_jack())
return cpuDdrTbl6601[idx].cpuClk;
else
return cpuDdrL2Tbl[idx].cpuClk;
@@ -196,9 +198,10 @@
if (idx == 0xFFFFFFFF)
return 0;
else {
- if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
+ if (boardId == RD_88F6601_MC_ID ||
+ boardId == RD_88F6601_MC2L_ID ||
boardId == RD_88F6601_MC_ID ||
- (GFLT300_ID == boardId) || (GFLT200_ID == boardId) || (GFLT110_ID == boardId))
+ gfiber_is_any_jack())
return cpuDdrTbl6601[idx].l2Clk;
else
return cpuDdrL2Tbl[idx].l2Clk;
@@ -226,7 +229,7 @@
if (id == RD_88F6510_SFU_ID || id == DB_88F6601_BP_ID ||
id == RD_88F6601_MC_ID || id == RD_88F6601_MC2L_ID ||
- GFLT300_ID == id || GFLT200_ID == id || id == GFLT110_ID)
+ gfiber_is_any_jack())
return MV_FALSE;
/* Read S@R register value */
diff --git a/arch/arm/mach-feroceon-kw2/sysmap.c b/arch/arm/mach-feroceon-kw2/sysmap.c
index 88fa6c4..c6e8fda 100755
--- a/arch/arm/mach-feroceon-kw2/sysmap.c
+++ b/arch/arm/mach-feroceon-kw2/sysmap.c
@@ -15,6 +15,7 @@
*/
+#include "gflt.h"
#include "mvSysHwConfig.h"
#include "ctrlEnv/sys/mvCpuIf.h"
#include "boardEnv/mvBoardEnvLib.h"
@@ -215,6 +216,9 @@
MV_CPU_DEC_WIN* mv_sys_map(void)
{
+ if (gfiber_is_any_jack()) {
+ return SYSMAP_88F6601;
+ }
switch(mvBoardIdGet()) {
case DB_88F6535_BP_ID:
case RD_88F6510_SFU_ID:
@@ -224,9 +228,6 @@
case DB_88F6601_BP_ID:
case RD_88F6601_MC_ID:
case RD_88F6601_MC2L_ID:
- case GFLT300_ID:
- case GFLT200_ID:
- case GFLT110_ID:
return SYSMAP_88F6601;
default:
printk("ERROR: can't find system address map\n");
