| /******************************************************************************* |
| Copyright (C) Marvell International Ltd. and its affiliates |
| |
| This software file (the "File") is owned and distributed by Marvell |
| International Ltd. and/or its affiliates ("Marvell") under the following |
| alternative licensing terms. Once you have made an election to distribute the |
| File under one of the following license alternatives, please (i) delete this |
| introductory statement regarding license alternatives, (ii) delete the two |
| license alternatives that you have not elected to use and (iii) preserve the |
| Marvell copyright notice above. |
| |
| |
| ******************************************************************************** |
| Marvell GPL License Option |
| |
| If you received this File from Marvell, you may opt to use, redistribute and/or |
| modify this File in accordance with the terms and conditions of the General |
| Public License Version 2, June 1991 (the "GPL License"), a copy of which is |
| available along with the File in the license.txt file or by writing to the Free |
| Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or |
| on the worldwide web at http://www.gnu.org/licenses/gpl.txt. |
| |
| THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED |
| WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY |
| DISCLAIMED. The GPL License provides additional details about this warranty |
| disclaimer. |
| *******************************************************************************/ |
| |
| #define SW_SRC_PORT_MIN (1) |
| #define SW_SRC_PORT_MAX (4) |
| |
| #define SW_QOS_NUM_OF_QUEUES (4) |
| |
| #define SW_MAX_VLAN_NUM (4095) |
| #define SW_MAX_PORTS_NUM (7) |
| |
| #define SW_PORT_NOT_BELONG (0) |
| #define SW_PORT_BELONG (1) |
| |
| #define MV_TPM_DEFAULT_WEIGHT (2) |
| |
| |
| /* Initial Q_PRI and F_PRI selection */ |
| |
| #define PRI_SEL_USE_PORTS_DEF (0) |
| #define PRI_SEL_TAG_PRI_ONLY (1) |
| #define PRI_SEL_IP_PRI_ONLY (2) |
| #define PRI_SEL_TAG_AND_IP_PRI (3) |
| #define PRI_SEL_TYPE_MAX (4) |
| |
| #define SW_QOS_NUM_OF_TAG_PRI (7) |
| #define SW_QOS_DSCP_MAX (64) |
| |
| /* LPort data base*/ |
| typedef struct _sw_port_info_type_t |
| { |
| GT_DOT1Q_MODE port_mode; |
| uint32_t cnt; |
| uint32_t vlan_blong[4095]; |
| } sw_port_type_info; |
| |
| typedef struct _sw_vlan_tbl_type |
| { |
| uint32_t members; /* bitmap of the ports max number of ports 32, if its value is 0, indicates that the VID do not exist in HW */ |
| uint8_t egr_mode[SW_MAX_PORTS_NUM]; /* egress mode of each port */ |
| GT_VTU_ENTRY vtu_entry; /* Add this member to record HW VT info to SW table, descrease access time for VT table */ |
| }sw_vlan_tbl_type; |
| |
| /* auto negotiation type */ |
| typedef enum _sw_autoneg_type_t |
| { |
| SW_AUTONEG_1000_FDX = 1<<0, |
| SW_AUTONEG_1000_HDX = 1<<1, |
| SW_AUTONEG_100_FDX = 1<<2, |
| SW_AUTONEG_100_HDX = 1<<3, |
| SW_AUTONEG_10_FDX = 1<<4, |
| SW_AUTONEG_10_HDX = 1<<5 |
| }sw_autoneg_type_t; |
| |
| /******************************************************************************* |
| * mv_switch_find_vid_entry_sw |
| * |
| * DESCRIPTION: |
| * The API find expected VTU entry in sw_vlan_tbl. |
| * |
| * INPUTS: |
| * vtuEntry - VTU entry, supply VID |
| * |
| * OUTPUTS: |
| * vtuEntry - VTU entry, store entry info if found |
| * found - find expected entry or not |
| * |
| * RETURNS: |
| * On success - GT_OK. |
| * |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_find_vid_entry_sw(GT_VTU_ENTRY *vtuEntry, GT_BOOL *found); |
| |
| /******************************************************************************* |
| * mv_switch_record_vid_entry_sw |
| * |
| * DESCRIPTION: |
| * The API store expected VTU entry in sw_vlan_tbl. |
| * |
| * INPUTS: |
| * vtuEntry - VTU entry |
| * |
| * OUTPUTS: |
| * None |
| * |
| * RETURNS: |
| * On success - GT_OK. |
| * |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_record_vid_entry_sw(GT_VTU_ENTRY *vtuEntry); |
| |
| /******************************************************************************* |
| * mv_switch_prv_port_add_vid |
| * |
| * DESCRIPTION: |
| * The API adds a VID to the list of the allowed VIDs per lport. |
| * |
| * INPUTS: |
| * lport - logic port id to set |
| * vid - vlan id |
| * gmac0Idx - port GMAC0 connects to, if its value is 0xFFFF, do not care GMAC0 port |
| * eMode - egress mode |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * see the example sample802_1qSetup(). |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_prv_port_add_vid |
| ( |
| uint32_t lport, |
| uint16_t vid, |
| uint16_t gmac0Idx, |
| uint8_t eMode |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_prv_del_vid_per_port |
| * |
| * DESCRIPTION: |
| * The API delete and existing VID from the list of VIDs allowed per lport. |
| * |
| * INPUTS: |
| * port - port for deleting the VID. |
| * vid - VLAN id. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_prv_del_vid_per_port |
| ( |
| uint32_t port, |
| uint16_t vid |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_add_static_mac |
| * |
| * DESCRIPTION: |
| * This function creates a static MAC entry in the MAC address table for a |
| * specific lport in the integrated switch |
| * |
| * INPUTS: |
| * lport - Packet origination. |
| * static_mac - 6byte network order MAC source address. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_add_static_mac |
| ( |
| uint32_t lport, |
| uint8_t static_mac[6] |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_del_static_mac |
| * |
| * DESCRIPTION: |
| * This function removes an existing static MAC entry from the MAC address |
| * table in the integrated switch. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * static_mac - 6byte network order MAC source address. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_del_static_mac |
| ( |
| uint8_t static_mac[6] |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_port_max_macs |
| * |
| * DESCRIPTION: |
| * This function limits the number of MAC addresses per lport. |
| * |
| * INPUTS: |
| * lport - Packet origination. |
| * mac_per_port - maximum number of MAC addresses per port (1-255). |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * The following care is needed when enabling this feature: |
| * 1) disable learning on the ports |
| * 2) flush all non-static addresses in the ATU |
| * 3) define the desired limit for the ports |
| * 4) re-enable learing on the ports |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_max_macs |
| ( |
| uint32_t lport, |
| uint8_t mac_per_port |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_port_max_macs |
| * |
| * DESCRIPTION: |
| * Port's auto learning limit. When the limit is non-zero value, the number |
| * of MAC addresses that can be learned on this lport are limited to the value |
| * specified in this API. When the learn limit has been reached any frame |
| * that ingresses this lport with a source MAC address not already in the |
| * address database that is associated with this lport will be discarded. |
| * Normal auto-learning will resume on the lport as soon as the number of |
| * active unicast MAC addresses associated to this lport is less than the |
| * learn limit. |
| * CPU directed ATU Load, Purge, or Move will not have any effect on the |
| * learn limit. |
| * This feature is disabled when the limit is zero. |
| * The following care is needed when enabling this feature: |
| * 1) dsable learning on the ports |
| * 2) flush all non-static addresses in the ATU |
| * 3) define the desired limit for the ports |
| * 4) re-enable learing on the ports |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * lport - Packet origination. |
| * |
| * |
| * OUTPUTS: |
| * limit - maximum number of MAC addresses per lport (1-255). |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_max_macs |
| ( |
| uint32_t lport, |
| uint32_t *limit |
| ); |
| /******************************************************************************* |
| * mv_switch_clear_dynamic_mac |
| * |
| * DESCRIPTION: |
| * Clear all dynamic MAC. |
| * |
| * INPUTS: |
| * |
| * OUTPUTS: |
| * |
| * RETURNS: |
| * GT_OK - on success |
| * GT_FAIL - on error |
| * GT_NOT_SUPPORTED - if current device does not support this feature. |
| * |
| * COMMENTS: |
| * None |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_clear_dynamic_mac |
| ( |
| void |
| ); |
| /******************************************************************************* |
| * mv_switch_set_mirror |
| * |
| * DESCRIPTION: |
| * Set port mirror. |
| * |
| * INPUTS: |
| * sport - Source port. |
| * dport - Destination port. |
| * mode - mirror mode. |
| * enable - enable/disable mirror. |
| * |
| * OUTPUTS: |
| * |
| * RETURNS: |
| * GT_OK - on success |
| * GT_FAIL - on error |
| * GT_NOT_SUPPORTED - if current device does not support this feature. |
| * |
| * COMMENTS: |
| * None |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_mirror |
| ( |
| IN uint32_t sport, |
| IN uint32_t dport, |
| IN GT_MIRROR_MODE mode, |
| IN GT_BOOL enable |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_mirror |
| * |
| * DESCRIPTION: |
| * Get port mirror status. |
| * |
| * INPUTS: |
| * sport - Source port. |
| * dport - Destination port. |
| * mode - mirror mode. |
| * |
| * OUTPUTS: |
| * enable - enable/disable mirror. |
| * |
| * RETURNS: |
| * GT_OK - on success |
| * GT_FAIL - on error |
| * GT_NOT_SUPPORTED - if current device does not support this feature. |
| * |
| * COMMENTS: |
| * None |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_mirror |
| ( |
| IN uint32_t sport, |
| IN uint32_t dport, |
| IN GT_MIRROR_MODE mode, |
| OUT GT_BOOL* enable |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_mtu |
| * |
| * DESCRIPTION: |
| * Set switch MTU size. |
| * |
| * INPUTS: |
| * mtu - MTU size. |
| * |
| * OUTPUTS: |
| * None |
| * |
| * RETURNS: |
| * GT_OK - on success |
| * GT_FAIL - on error |
| * GT_NOT_SUPPORTED - if current device does not support this feature. |
| * |
| * COMMENTS: |
| * None |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_mtu |
| ( |
| IN uint32_t mtu |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_mtu |
| * |
| * DESCRIPTION: |
| * Get switch MTU size. |
| * |
| * INPUTS: |
| * |
| * |
| * OUTPUTS: |
| * mtu - MTU size. |
| * |
| * RETURNS: |
| * GT_OK - on success |
| * GT_FAIL - on error |
| * GT_NOT_SUPPORTED - if current device does not support this feature. |
| * |
| * COMMENTS: |
| * None |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_mtu |
| ( |
| OUT uint32_t* mtu |
| ); |
| #if 0 |
| /******************************************************************************* |
| * mv_switch_set_port_flooding |
| * |
| * DESCRIPTION: |
| * This function control the flooding behavior (unknown Dest MAC address) per lport. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * egress_port - Egress lport for applying the flood settings. |
| * allow_flood - permit flooding of unknown DA: set to 1, |
| * do not permit flooding of uknown DA: set to 0. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_flooding |
| ( |
| uint32_t lport, |
| GT_BOOL mode |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_port_flooding |
| * |
| * DESCRIPTION: |
| * This routine gets Forward Unknown mode of a switch port. |
| * When this mode is set to GT_TRUE, normal switch operation occurs. |
| * When this mode is set to GT_FALSE, unicast frame with unknown DA addresses |
| * will not egress out this port. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * egress_port - Egress port for applying the flood settings. |
| * |
| * |
| * OUTPUTS: |
| * mode - GT_TRUE: header mode enabled |
| * GT_FALSE otherwise. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_flooding |
| ( |
| uint32_t lport, |
| uint32_t *mode |
| ); |
| #endif |
| /******************************************************************************* |
| * mv_switch_set_port_tagged |
| * |
| * DESCRIPTION: |
| * The API allows or drops tagged packets on a per lport basis. |
| * |
| * INPUTS: |
| * lport - lport for applying the filtering of tagged packets. |
| * mode - set to 1 = discard tagged packets per lport |
| * set to 0 = allow tagged packets per lport. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_tagged |
| ( |
| uint32_t lport, |
| GT_BOOL mode |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_port_tagged |
| * |
| * DESCRIPTION: |
| * This routine gets DiscardTagged bit for the given lport. |
| * |
| * INPUTS: |
| * lport - lport for applying the filtering of tagged packets. |
| |
| * |
| * OUTPUTS: |
| * mode - GT_TRUE if DiscardTagged bit is set, GT_FALSE otherwise |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_tagged |
| ( |
| uint32_t lport, |
| uint32_t *mode |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_port_untagged |
| * |
| * DESCRIPTION: |
| * The API allows or drops untagged packets on a per lport basis. |
| * |
| * INPUTS: |
| * lport - lport for applying the filtering of tagged packets. |
| * mode - set to 1 = discard untagged packets per lport |
| * set to 0 = alow untagged packets per lport. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_untagged |
| ( |
| uint32_t lport, |
| GT_BOOL mode |
| ); |
| |
| /******************************************************************************* |
| * tpm_sw_get_port_untagged |
| * |
| * DESCRIPTION: |
| * This routine gets DiscardUntagged bit for the given lport. |
| * |
| * INPUTS: |
| * lport - lport for applying the filtering of tagged packets. |
| |
| * |
| * OUTPUTS: |
| * mode - GT_TRUE if DiscardUntagged bit is set, GT_FALSE otherwise |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_untagged |
| ( |
| uint32_t lport, |
| uint32_t *mode |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_port_def_vlan |
| * |
| * DESCRIPTION: |
| * The API sets port default vlan id. |
| * |
| * INPUTS: |
| * lport - lport for applying the filtering of tagged packets. |
| * vid - the port vlan id. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_def_vlan |
| ( |
| IN uint32_t lport, |
| IN GT_U16 vid |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_port_def_vlan |
| * |
| * DESCRIPTION: |
| * This routine gets DiscardUntagged bit for the given lport. |
| * |
| * INPUTS: |
| * lport - lport for applying the filtering of tagged packets. |
| * |
| * OUTPUTS: |
| * vid - the port vlan id |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_def_vlan |
| ( |
| IN uint32_t lport, |
| OUT GT_U16 *vid |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_port_def_pri |
| * |
| * DESCRIPTION: |
| * The API sets port default priority. |
| * |
| * INPUTS: |
| * lport - lport for applying the filtering of tagged packets. |
| * pri - the port priority. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_def_pri |
| ( |
| IN uint32_t lport, |
| IN GT_U8 pri |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_port_def_pri |
| * |
| * DESCRIPTION: |
| * The API gets port default priority. |
| * |
| * INPUTS: |
| * lport - lport for applying the filtering of tagged packets. |
| * |
| * OUTPUTS: |
| * pri - the port priority. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_def_pri |
| ( |
| IN uint32_t lport, |
| OUT GT_U8 *pri |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_port_add_vid |
| * |
| * DESCRIPTION: |
| * The API adds a VID to the list of the allowed VIDs per lport. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * lport - lport for adding the vid. |
| * vid - VLAN id. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * see the example sample802_1qSetup(). |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_port_add_vid |
| ( |
| uint32_t lport, |
| uint16_t vid, |
| uint16_t gmac0Idx |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_del_vid_per_port |
| * |
| * DESCRIPTION: |
| * The API delete and existing VID from the list of VIDs allowed per lport. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * lport - lport for deleting the VID. |
| * vid - VLAN id. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_del_vid_per_port |
| ( |
| uint32_t lport, |
| uint16_t vid |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_port_vid_egress_mode |
| * |
| * DESCRIPTION: |
| * The API sets the egress mode for a member port of a vlan. |
| * |
| * INPUTS: |
| * lport - logic port id to set |
| * vid - vlan id |
| * vid - egress mode |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * MEMBER_EGRESS_UNMODIFIED - 0 |
| * NOT_A_MEMBER - 1 |
| * MEMBER_EGRESS_UNTAGGED - 2 |
| * MEMBER_EGRESS_TAGGED - 3 |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_vid_egress_mode |
| ( |
| IN uint32_t lport, |
| IN uint16_t vid, |
| IN uint8_t eMode |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_port_print_vid |
| * |
| * DESCRIPTION: |
| * The API return VID to the list of the allowed VIDs per lport. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * vid - searching VID. |
| * |
| * OUTPUTS: |
| * found - GT_TRUE, if the appropriate entry exists. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_port_print_vid |
| ( |
| uint32_t vid, |
| uint32_t *found |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_prv_set_secure_mode |
| * |
| * DESCRIPTION: |
| * Change a port mode in the SW data base and remove it from all VLANs |
| * |
| * INPUTS: |
| * port - secure port number |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_prv_set_secure_mode |
| ( |
| uint32_t port |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_prv_set_fallback_mode |
| * |
| * DESCRIPTION: |
| * Change a port mode in the SW data base and add it to all VLANs |
| * |
| * INPUTS: |
| * port - secure port number |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_prv_set_fallback_mode |
| ( |
| uint32_t port |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_vid_filter_per_port |
| * |
| * DESCRIPTION: |
| * The API sets the filtering mode of a certain lport. |
| * If the lport is in filtering mode, only the VIDs added by the |
| * tpm_sw_port_add_vid API will be allowed to ingress and egress the lport. |
| * |
| * INPUTS: |
| * lport - lport for setting the filtering mode. |
| * vid_filter - set to 1 - means the lport will DROP all packets which are NOT in |
| * the allowed VID list (built using API tpm_sw_port_add_vid). |
| * set to '0' - means that the list of VIDs allowed |
| * per lport has no significance (the list is not deleted). |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_vid_filter_per_port |
| ( |
| uint32_t lport, |
| uint8_t vid_filter |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_vid_filter_per_port |
| * |
| * DESCRIPTION: |
| * The API gets the filtering mode of a certain lport. |
| * If the lport is in filtering mode, only the VIDs added by the |
| * tpm_sw_port_add_vid API will be allowed to ingress and egress the lport. |
| * |
| * INPUTS: |
| * lport - lport for setting the filtering mode. |
| * |
| * OUTPUTS: |
| * vid_filter - set to - means the lport will DROP all packets which are NOT in |
| * the allowed VID list (built using API tpm_sw_port_add_vid). |
| * set to - means that the list of VIDs allowed |
| * per lport has no significance (the list is not deleted). |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_vid_filter_per_port |
| ( |
| IN uint32_t lport, |
| OUT uint8_t *vid_filter |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_port_sched_mode() |
| * |
| * DESCRIPTION: Configures the scheduling mode per Ethernet port. |
| * |
| * INPUTS: |
| * uni_port - UNI port for setting the scheduling mode |
| * sched_mode - scheduler mode per port |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success, the function returns TPM_RC_OK. On error different types are returned |
| * according to the case - see tpm_error_code_t. |
| *DDD |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_sched_mode |
| ( |
| uint32_t uni_port, |
| GT_PORT_SCHED_MODE mode |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_uni_q_weight |
| * |
| * DESCRIPTION: |
| * The API configures the weight of a queues for all |
| * Ethernet UNI ports in the integrated switch. |
| * |
| * INPUTS: |
| * weight - weight value per queue (1-8).queue (value 1-3). |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. DDD |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_uni_q_weight |
| ( |
| uint8_t queue_id, |
| uint8_t weight |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_uni_ingr_police_rate |
| * |
| * DESCRIPTION: |
| * The API Configures an ingress policing function for an Ethernet UNI lport. |
| * |
| * INPUTS: |
| * owner_id - APP owner id, should be used for all API calls. |
| * uni_port - uni lport for configuring the ingress policer function. |
| * count_mode - count mode: |
| * GT_PIRL2_COUNT_FRAME |
| * GT_PIRL2_COUNT_ALL_LAYER1 |
| * GT_PIRL2_COUNT_ALL_LAYER2 |
| * GT_PIRL2_COUNT_ALL_LAYER3 |
| * cir - comited info rate. |
| * cbs - Committed Burst Size limit (expected to be 2kBytes) |
| * ebs - Excess Burst Size limit ( 0 ~ 0xFFFFFF) |
| |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_uni_ingr_police_rate |
| ( |
| IN uint32_t uni_port, |
| IN GT_PIRL2_COUNT_MODE count_mode, |
| IN uint32_t cir, |
| IN uint32_t cbs, |
| IN uint32_t ebs |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_uni_ingr_police_rate |
| * |
| * DESCRIPTION: |
| * The API gets an ingress policing function for an Ethernet UNI lport. |
| * |
| * INPUTS: |
| * owner_id - APP owner id, should be used for all API calls. |
| * uni_port - uni lport for configuring the ingress policer function. |
| * |
| * |
| * OUTPUTS: |
| * count_mode - count mode: |
| * GT_PIRL2_COUNT_FRAME |
| * GT_PIRL2_COUNT_ALL_LAYER1 |
| * GT_PIRL2_COUNT_ALL_LAYER2 |
| * GT_PIRL2_COUNT_ALL_LAYER3 |
| * cir - comited info rate. |
| * cbs - Committed Burst Size limit (expected to be 2kBytes) |
| * ebs - Excess Burst Size limit ( 0 ~ 0xFFFFFF) |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * None. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_uni_ingr_police_rate |
| ( |
| IN uint32_t uni_port, |
| OUT GT_PIRL2_COUNT_MODE *count_mode, |
| OUT uint32_t *cir, |
| OUT uint32_t *cbs, |
| OUT uint32_t *ebs |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_uni_tc_ingr_police_rate |
| * |
| * DESCRIPTION: |
| * The API Configures a policer function for a traffic class for an Ethernet UNI lport. |
| * There are 4 globally defined traffic classes in the integrated switch. |
| * |
| * INPUTS: |
| * uni_port - uni lport for configuring the ingress policer function. |
| * tc - traffic class ( a combination of p-bits and DSCP values). |
| * cir - comited info rate. |
| * cbs - comited burst rate. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_uni_tc_ingr_police_rate |
| ( |
| uint32_t uni_port, |
| uint32_t tc, |
| uint32_t cir, |
| uint32_t cbs |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_uni_tc_ingr_police_rate |
| * |
| * DESCRIPTION: |
| * This routine gets the lport's ingress data limit for priority 0 or 1 or 2 or 3 frames. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * uni_port - uni lport for configuring the ingress policer function. |
| * |
| * OUTPUTS: |
| * |
| * tc - traffic class ( a combination of p-bits and DSCP values). |
| * cir - comited info rate. |
| * cbs - comited burst rate |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_uni_tc_ingr_police_rate |
| ( |
| uint32_t uni_port, |
| uint32_t *tc, |
| uint32_t *cir, |
| uint32_t *cbs |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_uni_egr_rate_limit |
| * |
| * DESCRIPTION: |
| * The API Configures the egress frame rate limit of an Ethernet UNI lport |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * trg_lport - uni lport for configuring the egress rate limit. |
| * mode - frame/rate limit mode |
| * frame_rate_limit_val - egress rate limit value. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * GT_ERATE_TYPE used kbRate - frame rate valid values are: |
| * 7600,..., 9600, |
| * 10000, 20000, 30000, 40000, ..., 100000, |
| * 110000, 120000, 130000, ..., 1000000. |
| * |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_uni_egr_rate_limit |
| ( |
| IN uint32_t trg_lport, |
| IN GT_PIRL_ELIMIT_MODE mode, |
| IN uint32_t frame_rate_limit_val |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_uni_egr_rate_limit |
| * |
| * DESCRIPTION: |
| * The API return the egress frame rate limit of an Ethernet UNI lport |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * trg_lport - uni lport for configuring the egress rate limit. |
| |
| * |
| * OUTPUTS: |
| * mode - frame/rate limit mode |
| * rate_limit_val - egress rate limit value.. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * GT_ERATE_TYPE used kbRate - frame rate valid values are: |
| * 7600,..., 9600, |
| * 10000, 20000, 30000, 40000, ..., 100000, |
| * 110000, 120000, 130000, ..., 1000000. |
| |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_uni_egr_rate_limit |
| ( |
| IN uint32_t trg_lport, |
| OUT GT_PIRL_ELIMIT_MODE *mode, |
| OUT uint32_t *frame_rate_limit_val |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_age_time |
| * |
| * DESCRIPTION: |
| * This function Sets the Mac address table size. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * time_out - Aging Time value |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * NONE. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_age_time |
| ( |
| uint32_t time_out |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_mac_learn |
| * |
| * DESCRIPTION: |
| * Enable/disable automatic learning of new source MAC addresses on port |
| * ingress. |
| * |
| * INPUTS: |
| * lport - logical port number to set. |
| * enable - GT_TRUE for enable or GT_FALSE otherwise |
| * |
| * OUTPUTS: |
| * None |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case, see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| * GalTis: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_mac_learn |
| ( |
| IN uint32_t lport, |
| IN GT_BOOL enable |
| ); |
| /******************************************************************************* |
| * mv_switch_get_mac_learn |
| * |
| * DESCRIPTION: |
| * Get automatic learning status of new source MAC addresses on port ingress. |
| * |
| * INPUTS: |
| * None |
| * |
| * OUTPUTS: |
| * lport - logical port number to set. |
| * enable - GT_TRUE if enabled or GT_FALSE otherwise |
| * |
| * RETURNS: |
| * GT_OK - on success |
| * GT_FAIL - on error |
| * GT_NOT_SUPPORTED - if current device does not support this feature. |
| * |
| * COMMENTS: |
| * |
| * GalTis: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_mac_learn |
| ( |
| IN uint32_t lport, |
| OUT GT_BOOL *enable |
| ); |
| /******************************************************************************* |
| * mv_switch_set_port_vlan_ports |
| * |
| * DESCRIPTION: |
| * This routine sets the port VLAN group port membership list. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * lport - logical port number to set. |
| * memPorts - array of logical ports in the same vlan. |
| * memPortsLen - number of members in memPorts array |
| * |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * NONE. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_vlan_ports |
| ( |
| uint32_t lport, |
| uint32_t memPorts[], |
| uint8_t memPortsLen |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_port_vlan_ports |
| * |
| * DESCRIPTION: |
| * This routine gets the port VLAN group port membership list. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * lport - logical port number to set. |
| * |
| * |
| * OUTPUTS: |
| * memPorts - array of logical ports in the same vlan. |
| * memPortsLen - number of members in memPorts array |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * NONE. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_vlan_ports |
| ( |
| uint32_t lport, |
| uint32_t memPorts[], |
| uint8_t *memPortsLen |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_age_time |
| * |
| * DESCRIPTION: |
| * This function Sets the Mac address table size. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * |
| * OUTPUTS: |
| * time_out - time out value. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * NONE. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_age_time |
| ( |
| uint32_t *time_out |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_ingress_limit_mode |
| * |
| * DESCRIPTION: |
| * This routine sets the port's rate control ingress limit mode. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * lport - logical port number to set. |
| * mode - rate control ingress limit mode. |
| * |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * GT_LIMT_ALL = 0, limit and count all frames |
| * GT_LIMIT_FLOOD, limit and count Broadcast, Multicast and flooded unicast frames |
| * GT_LIMIT_BRDCST_MLTCST, limit and count Broadcast and Multicast frames |
| * GT_LIMIT_BRDCST limit and count Broadcast frames |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_ingress_limit_mode |
| ( |
| uint32_t lport, |
| GT_RATE_LIMIT_MODE mode |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_ingress_limit_mode |
| * |
| * DESCRIPTION: |
| * This routine gets the port's rate control ingress limit mode. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * lport - logical port number to set. |
| * |
| * |
| * OUTPUTS: |
| * mode - rate control ingress limit mode. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * GT_LIMT_ALL = 0, limit and count all frames |
| * GT_LIMIT_FLOOD, limit and count Broadcast, Multicast and flooded unicast frames |
| * GT_LIMIT_BRDCST_MLTCST, limit and count Broadcast and Multicast frames |
| * GT_LIMIT_BRDCST limit and count Broadcast frames |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_ingress_limit_mode |
| ( |
| uint32_t lport, |
| GT_RATE_LIMIT_MODE *mode |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_tag_pri_mapping |
| * |
| * DESCRIPTION: |
| * This routine sets initial QPri and FPri selection. |
| * |
| * INPUTS: |
| * lport - Port number to set init pri. |
| * init_pri - Initial QPri and FPri selection type. |
| * tag_if_both - Use Tag information for the initial QPri assignment if the frame is both |
| * tagged and its also IPv4 or IPv6 and if InitialPri uses Tag & IP priority. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * PRI_SEL_USE_PORTS_DEF - 0 |
| * PRI_SEL_TAG_PRI_ONLY - 1 |
| * PRI_SEL_IP_PRI_ONLY - 2 |
| * PRI_SEL_TAG_AND_IP_PRI - 3 |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_priority_selection |
| ( |
| IN uint8_t lport, |
| IN uint8_t init_pri, |
| IN GT_BOOL tag_if_both |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_priority_selection |
| * |
| * DESCRIPTION: |
| * This routine gets initial QPri and FPri selection. |
| * |
| * INPUTS: |
| * lport - Port number to set init pri. |
| * |
| * OUTPUTS: |
| * init_pri - Initial QPri and FPri selection type. |
| * tag_if_both - Use Tag information for the initial QPri assignment if the frame is both |
| * tagged and its also IPv4 or IPv6 and if InitialPri uses Tag & IP priority. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * PRI_SEL_USE_PORTS_DEF - 0 |
| * PRI_SEL_TAG_PRI_ONLY - 1 |
| * PRI_SEL_IP_PRI_ONLY - 2 |
| * PRI_SEL_TAG_AND_IP_PRI - 3 |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_priority_selection |
| ( |
| IN uint8_t lport, |
| OUT uint8_t *init_pri, |
| OUT GT_BOOL *tag_if_both |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_tag_pri_mapping |
| * |
| * DESCRIPTION: |
| * This routine maps a tag priority to a queue priority. |
| * |
| * INPUTS: |
| * tag_pri - Source tag priority number. |
| * q_pri - Target queue priority number. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * tag_pri 0-7. |
| * q_pri 0-3. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_tag_pri_mapping |
| ( |
| IN uint8_t tag_pri, |
| IN uint8_t q_pri |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_tag_pri_mapping |
| * |
| * DESCRIPTION: |
| * This routine gets the queue priority for a tag priority mapping to. |
| * |
| * INPUTS: |
| * tag_pri - Source tag priority number. |
| * |
| * OUTPUTS: |
| * q_pri - Target queue priority number. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * tag_pri 0-7. |
| * q_pri 0-3. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_tag_pri_mapping |
| ( |
| IN uint8_t tag_pri, |
| OUT uint8_t *q_pri |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_ip_pri_mapping |
| * |
| * DESCRIPTION: |
| * This routine maps a dscp value to a queue priority. |
| * |
| * INPUTS: |
| * dscp - Source dscp value. |
| * q_pri - Target queue priority number. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * dscp 0-63. |
| * q_pri 0-3. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_ip_pri_mapping |
| ( |
| IN uint8_t dscp, |
| IN uint8_t q_pri |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_ip_pri_mapping |
| * |
| * DESCRIPTION: |
| * This routine gets the queue priority for a dscp value mapping to. |
| * |
| * INPUTS: |
| * dscp - Source dscp value. |
| * |
| * OUTPUTS: |
| * q_pri - Target queue priority number. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * dscp 0-63. |
| * q_pri 0-3. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_ip_pri_mapping |
| ( |
| IN uint8_t dscp, |
| OUT uint8_t *q_pri |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_unknown_unicast_flood |
| * |
| * DESCRIPTION: |
| * This routine enable/disable unknown unicast frame egress on a specific port. |
| * |
| * INPUTS: |
| * lport - Port number to egress unknown unicast frames. |
| * enable - Enable unknown unicast flooding. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_unknown_unicast_flood |
| ( |
| IN uint8_t lport, |
| OUT GT_BOOL enable |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_unknown_unicast_flood |
| * |
| * DESCRIPTION: |
| * This routine gets unknown unicast frame egress mode of a specific port. |
| * |
| * INPUTS: |
| * lport - Port number to egress unknown unicast frames. |
| * |
| * OUTPUTS: |
| * enable - Enable unknown unicast flooding. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_unknown_unicast_flood |
| ( |
| IN uint8_t lport, |
| OUT GT_BOOL *enable |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_unknown_multicast_flood |
| * |
| * DESCRIPTION: |
| * This routine enable/disable unknown multicast frame egress on a specific port. |
| * |
| * INPUTS: |
| * lport - Port number to egress unknown multicast frames. |
| * enable - Enable unknown multicast flooding. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_unknown_multicast_flood |
| ( |
| IN uint8_t lport, |
| OUT GT_BOOL enable |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_unknown_multicast_flood |
| * |
| * DESCRIPTION: |
| * This routine gets unknown multicast frame egress mode of a specific port. |
| * |
| * INPUTS: |
| * lport - Port number to egress unknown multicast frames. |
| * |
| * OUTPUTS: |
| * enable - Enable unknown multicast flooding. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_unknown_multicast_flood |
| ( |
| IN uint8_t lport, |
| OUT GT_BOOL *enable |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_broadcast_flood |
| * |
| * DESCRIPTION: |
| * This routine decides whether the switch always floods the broadcast |
| * frames to all portsr or uses the multicast egress mode (per port). |
| * |
| * INPUTS: |
| * always_on - always floods the broadcast regardless the multicast egress mode. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_broadcast_flood |
| ( |
| IN GT_BOOL always_on |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_broadcast_flood |
| * |
| * DESCRIPTION: |
| * This routine gets the global mode of broadcast flood. |
| * |
| * INPUTS: |
| * None. |
| * |
| * OUTPUTS: |
| * always_on - always floods the broadcast regardless the multicast egress mode. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_broadcast_flood |
| ( |
| IN GT_BOOL *always_on |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_marvell_header_mode |
| * |
| * DESCRIPTION: |
| * This routine sets ingress and egress header mode of a switch port. |
| * |
| * INPUTS: |
| * lport - logical port number to set. |
| * enable - enable marvell header. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_marvell_header_mode |
| ( |
| IN uint8_t lport, |
| IN GT_BOOL enable |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_marvell_header_mode |
| * |
| * DESCRIPTION: |
| * This routine gets ingress and egress header mode of a switch port. |
| * |
| * INPUTS: |
| * lport - logical port number to set. |
| * |
| * OUTPUTS: |
| * enable - enable marvell header. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_marvell_header_mode |
| ( |
| IN uint8_t lport, |
| IN GT_BOOL *enable |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_port_preamble |
| * |
| * DESCRIPTION: |
| * This routine sets preamble of a switch port. |
| * |
| * INPUTS: |
| * lport - logical port number to set. |
| * preamble - preamble length. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_preamble |
| ( |
| IN uint8_t lport, |
| IN uint16_t preamble |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_port_preamble |
| * |
| * DESCRIPTION: |
| * This routine gets preamble of a switch port. |
| * |
| * INPUTS: |
| * lport - logical port number to set. |
| * |
| * OUTPUTS: |
| * preamble - preamble length. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_preamble |
| ( |
| IN uint8_t lport, |
| OUT uint16_t *preamble |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_port_autoneg_mode |
| * |
| * DESCRIPTION: |
| * The API Configures the auto negotiation state of an Ethernet lport. |
| * INPUTS: |
| * lport - logical port number for setting the auto negotiation state. |
| * autoneg_state - autonegotiation state, enabled or disabled. |
| * autoneg_mode - enum: |
| * SPEED_AUTO_DUPLEX_AUTO: Auto for both speed and duplex |
| * SPEED_1000_DUPLEX_AUTO: 1000Mbps and auto duplex |
| * SPEED_100_DUPLEX_AUTO: 100Mbps and auto duplex |
| * SPEED_10_DUPLEX_AUTO: 10Mbps and auto duplex |
| * SPEED_AUTO_DUPLEX_FULL: Auto for speed only and Full duplex |
| * SPEED_AUTO_DUPLEX_HALF: Auto for speed only and Half duplex. (1000Mbps is not supported) |
| * SPEED_1000_DUPLEX_FULL: 1000Mbps Full duplex. |
| * SPEED_1000_DUPLEX_HALF: 1000Mbps half duplex. |
| * SPEED_100_DUPLEX_FULL: 100Mbps Full duplex. |
| * SPEED_100_DUPLEX_HALF: 100Mbps half duplex. |
| * SPEED_10_DUPLEX_FULL: 10Mbps Full duplex. |
| * SPEED_10_DUPLEX_HALF: 10Mbps half duplex. |
| |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case,see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_autoneg_mode |
| ( |
| IN uint32_t lport, |
| IN GT_BOOL autoneg_state, |
| IN GT_PHY_AUTO_MODE autoneg_mode |
| ); |
| |
| |
| /******************************************************************************* |
| * mv_switch_get_port_autoneg_mode |
| * |
| * DESCRIPTION: |
| * The API return the the auto negotiation state of an Ethernet lport. |
| * INPUTS: |
| * lport - logical port number for getting the auto negotiation state. |
| * |
| * |
| * OUTPUTS: |
| * autoneg_state - autonegotiation state, enabled or disabled. |
| * autoneg_mode - enum: |
| * SPEED_AUTO_DUPLEX_AUTO: Auto for both speed and duplex |
| * SPEED_1000_DUPLEX_AUTO: 1000Mbps and auto duplex |
| * SPEED_100_DUPLEX_AUTO: 100Mbps and auto duplex |
| * SPEED_10_DUPLEX_AUTO: 10Mbps and auto duplex |
| * SPEED_AUTO_DUPLEX_FULL: Auto for speed only and Full duplex |
| * SPEED_AUTO_DUPLEX_HALF: Auto for speed only and Half duplex. (1000Mbps is not supported) |
| * SPEED_1000_DUPLEX_FULL: 1000Mbps Full duplex. |
| * SPEED_1000_DUPLEX_HALF: 1000Mbps half duplex. |
| * SPEED_100_DUPLEX_FULL: 100Mbps Full duplex. |
| * SPEED_100_DUPLEX_HALF: 100Mbps half duplex. |
| * SPEED_10_DUPLEX_FULL: 10Mbps Full duplex. |
| * SPEED_10_DUPLEX_HALF: 10Mbps half duplex. |
| |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case, see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_autoneg_mode |
| ( |
| IN uint32_t lport, |
| OUT GT_BOOL *autoneg_state, |
| OUT GT_PHY_AUTO_MODE *autoneg_mode |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_restart_port_autoneg |
| * |
| * DESCRIPTION: |
| * The API restart the auto negotiation of an Ethernet lport. |
| * INPUTS: |
| * lport - logical port number for restarting the auto negotiation state. |
| * |
| * |
| * OUTPUTS: |
| * NONE. |
| * . |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_restart_port_autoneg |
| ( |
| IN uint32_t lport |
| ); |
| /******************************************************************************* |
| * mv_switch_set_phy_port_state |
| * |
| * DESCRIPTION: |
| * The API Configures the PHY port state of an Ethernet lport. |
| * INPUTS: |
| * lport - logical port to set. |
| * phy_port_state - PHY port state to set. |
| * 0:normal state |
| * 1:power down |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_phy_port_state |
| ( |
| IN uint32_t lport, |
| IN GT_BOOL phy_port_state |
| ); |
| /******************************************************************************* |
| * mv_switch_get_phy_port_state |
| * |
| * DESCRIPTION: |
| * The API return the PHY port state of an Ethernet lport. |
| * INPUTS: |
| * lport - logical port number for getting the PHY port state. |
| * |
| * |
| * OUTPUTS: |
| * phy_port_state - 0:normal state |
| * 1:power down . |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_phy_port_state |
| ( |
| IN uint32_t lport, |
| OUT GT_BOOL * phy_port_state |
| ); |
| /******************************************************************************* |
| * mv_switch_get_phy_port_state |
| * |
| * DESCRIPTION: |
| * The API return the PHY port state of an Ethernet lport. |
| * INPUTS: |
| * lport - logical port number for getting the PHY port state. |
| * |
| * |
| * OUTPUTS: |
| * phy_port_state - 0:normal state |
| * 1:power down . |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_link_status |
| ( |
| IN uint32_t lport, |
| OUT GT_BOOL * phy_port_state |
| ); |
| /******************************************************************************* |
| * mv_switch_get_port_duplex_status |
| * |
| * DESCRIPTION: |
| * The API return realtime port duplex status of an Ethernet lport. |
| * INPUTS: |
| * lport - logical port number for getting the port link status. |
| * |
| * |
| * OUTPUTS: |
| * port_duplex_status - 0:half deplex mode |
| * 1:full deplex mode . |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case, see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_duplex_status |
| ( |
| IN uint32_t lport, |
| OUT GT_BOOL * port_duplex_status |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_port_speed_mode |
| * |
| * DESCRIPTION: |
| * The API return realtime port speed mode of an Ethernet lport. |
| * INPUTS: |
| * lport - logical port number for getting the port link status. |
| * |
| * |
| * OUTPUTS: |
| * port_duplex_status - 0:10M |
| * 1:100M |
| * 2:1000M |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case, see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_speed_mode |
| ( |
| IN uint32_t lport, |
| OUT GT_PORT_SPEED_MODE *speed |
| ); |
| /******************************************************************************* |
| * mv_switch_set_port_pause |
| * |
| * DESCRIPTION: |
| * This routine will set the pause bit in Autonegotiation Advertisement |
| * Register. And restart the autonegotiation. |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * The physical address, if SERDES device is accessed |
| * state - GT_PHY_PAUSE_MODE enum value. |
| * GT_PHY_NO_PAUSE - disable pause |
| * GT_PHY_PAUSE - support pause |
| * GT_PHY_ASYMMETRIC_PAUSE - support asymmetric pause |
| * GT_PHY_BOTH_PAUSE - support both pause and asymmetric pause |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * COMMENTS: |
| * data sheet register 4.10 Autonegotiation Advertisement Register |
| *******************************************************************************/ |
| |
| int32_t mv_switch_set_port_pause |
| ( |
| IN GT_LPORT port, |
| IN GT_PHY_PAUSE_MODE state |
| ); |
| /******************************************************************************* |
| * mv_switch_get_port_pause |
| * |
| * DESCRIPTION: |
| * This routine will get the pause bit in Autonegotiation Advertisement |
| * Register. |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * The physical address, if SERDES device is accessed |
| * |
| * |
| * OUTPUTS: |
| * state - GT_PHY_PAUSE_MODE enum value. |
| * GT_PHY_NO_PAUSE - disable pause |
| * GT_PHY_PAUSE - support pause |
| * GT_PHY_ASYMMETRIC_PAUSE - support asymmetric pause |
| * GT_PHY_BOTH_PAUSE - support both pause and asymmetric pause |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * COMMENTS: |
| * data sheet register 4.10 Autonegotiation Advertisement Register |
| *******************************************************************************/ |
| |
| int32_t mv_switch_get_port_pause |
| ( |
| IN GT_LPORT port, |
| OUT GT_PHY_PAUSE_MODE *state |
| ); |
| /******************************************************************************* |
| * mv_switch_get_port_pause_state |
| * |
| * DESCRIPTION: |
| * This routine will get the current pause state. |
| * Register. |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * The physical address, if SERDES device is accessed |
| * |
| * |
| * OUTPUTS: |
| * state - |
| * GT_FALSE: MAC Pause not implemented in the link partner or in MyPause |
| * GT_TRUE:MAC Pause is implemented in the link partner and in MyPause |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case, see tpm_error_code_t. |
| * COMMENTS: |
| * None. |
| *******************************************************************************/ |
| |
| int32_t mv_switch_get_port_pause_state |
| ( |
| IN GT_LPORT port, |
| OUT GT_BOOL *state |
| ); |
| /******************************************************************************* |
| * mv_switch_set_port_loopback |
| * |
| * DESCRIPTION: |
| * Enable/Disable Internal Port Loopback. |
| * For 10/100 Fast Ethernet PHY, speed of Loopback is determined as follows: |
| * If Auto-Negotiation is enabled, this routine disables Auto-Negotiation and |
| * forces speed to be 10Mbps. |
| * If Auto-Negotiation is disabled, the forced speed is used. |
| * Disabling Loopback simply clears bit 14 of control register(0.14). Therefore, |
| * it is recommended to call gprtSetPortAutoMode for PHY configuration after |
| * Loopback test. |
| * For 10/100/1000 Gigagbit Ethernet PHY, speed of Loopback is determined as follows: |
| * If Auto-Negotiation is enabled and Link is active, the current speed is used. |
| * If Auto-Negotiation is disabled, the forced speed is used. |
| * All other cases, default MAC Interface speed is used. Please refer to the data |
| * sheet for the information of the default MAC Interface speed. |
| * |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * The physical address, if SERDES device is accessed |
| * enable - If GT_TRUE, enable loopback mode |
| * If GT_FALSE, disable loopback mode |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * GT_OK - on success |
| * GT_FAIL - on error |
| * |
| * COMMENTS: |
| * data sheet register 0.14 - Loop_back |
| * |
| *******************************************************************************/ |
| |
| int32_t mv_switch_set_port_loopback |
| ( |
| IN GT_LPORT port, |
| IN GT_BOOL enable |
| ); |
| /******************************************************************************* |
| * mv_switch_get_port_loopback |
| * |
| * DESCRIPTION: |
| * Get Internal Port Loopback state. |
| * For 10/100 Fast Ethernet PHY, speed of Loopback is determined as follows: |
| * If Auto-Negotiation is enabled, this routine disables Auto-Negotiation and |
| * forces speed to be 10Mbps. |
| * If Auto-Negotiation is disabled, the forced speed is used. |
| * Disabling Loopback simply clears bit 14 of control register(0.14). Therefore, |
| * it is recommended to call gprtSetPortAutoMode for PHY configuration after |
| * Loopback test. |
| * For 10/100/1000 Gigagbit Ethernet PHY, speed of Loopback is determined as follows: |
| * If Auto-Negotiation is enabled and Link is active, the current speed is used. |
| * If Auto-Negotiation is disabled, the forced speed is used. |
| * All other cases, default MAC Interface speed is used. Please refer to the data |
| * sheet for the information of the default MAC Interface speed. |
| * |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * The physical address, if SERDES device is accessed |
| * |
| * OUTPUTS: |
| * enable - If GT_TRUE, loopback mode is enabled |
| * If GT_FALSE, loopback mode is disabled |
| * |
| * RETURNS: |
| * GT_OK - on success |
| * GT_FAIL - on error |
| * |
| * COMMENTS: |
| * data sheet register 0.14 - Loop_back |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_loopback |
| ( |
| IN GT_LPORT port, |
| OUT GT_BOOL *enable |
| ); |
| /******************************************************************************* |
| * mv_switch_set_port_line_loopback |
| * |
| * DESCRIPTION: |
| * Enable/Disable Port Line Loopback. |
| * |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * The physical address, if SERDES device is accessed |
| * enable - If GT_TRUE, enable loopback mode |
| * If GT_FALSE, disable loopback mode |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * GT_OK - on success |
| * GT_FAIL - on error |
| * |
| * COMMENTS: |
| * data sheet register FE:28.4, GE:21_2.14 - Loop_back |
| * |
| *******************************************************************************/ |
| |
| int32_t mv_switch_set_port_line_loopback |
| ( |
| IN GT_LPORT port, |
| IN GT_BOOL enable |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_port_line_loopback |
| * |
| * DESCRIPTION: |
| * Get Port Line Loopback status. |
| * |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * The physical address, if SERDES device is accessed |
| * |
| * OUTPUTS: |
| * enable - If GT_TRUE, enable loopback mode |
| * If GT_FALSE, disable loopback mode* enable - If GT_TRUE, enable loopback mode |
| * If GT_FALSE, disable loopback mode |
| * |
| * RETURNS: |
| * GT_OK - on success |
| * GT_FAIL - on error |
| * |
| * COMMENTS: |
| * data sheet register FE:28.4, GE:21_2.14 - Loop_back |
| * |
| *******************************************************************************/ |
| |
| int32_t mv_switch_get_port_line_loopback |
| ( |
| IN GT_LPORT port, |
| OUT GT_BOOL* enable |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_port_duplex_mode |
| * |
| * DESCRIPTION: |
| * Sets duplex mode for a specific logical port. This function will keep |
| * the speed and loopback mode to the previous value, but disable others, |
| * such as Autonegotiation. |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * The physical address, if SERDES device is accessed |
| * enable - Enable/Disable dulpex mode |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * GT_OK - on success |
| * GT_FAIL - on error |
| * |
| * COMMENTS: |
| * data sheet register 0.8 - Duplex Mode |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_duplex_mode |
| ( |
| IN GT_LPORT port, |
| IN GT_BOOL enable |
| ); |
| /******************************************************************************* |
| * mv_switch_get_port_duplex_mode |
| * |
| * DESCRIPTION: |
| * Gets duplex mode for a specific logical port. |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * The physical address, if SERDES device is accessed |
| * |
| * OUTPUTS: |
| * enable - Dulpex mode :Enabled or Disabled |
| * |
| * RETURNS: |
| * GT_OK - on success |
| * GT_FAIL - on error |
| * |
| * COMMENTS: |
| * data sheet register 0.8 - Duplex Mode |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_duplex_mode |
| ( |
| IN GT_LPORT port, |
| OUT GT_BOOL* enable |
| ); |
| /******************************************************************************* |
| * mv_switch_set_port_speed |
| * |
| * DESCRIPTION: |
| * This routine will disable auto-negotiation and set the PHY port speed . |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * |
| * speed - PHY_SPEED_10_MBPS -10 Mbps |
| * PHY_SPEED_100_MBPS -100 Mbps |
| * PHY_SPEED_1000_MBPS -100 Mbps. |
| * |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| |
| int32_t mv_switch_set_port_speed |
| ( |
| IN GT_LPORT port, |
| IN GT_PHY_SPEED speed |
| ); |
| /******************************************************************************* |
| * mv_switch_get_port_speed |
| * |
| * DESCRIPTION: |
| * This routine will get current PHY port speed . |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * |
| * |
| * OUTPUTS: |
| * speed - PHY_SPEED_10_MBPS -10 Mbps |
| * PHY_SPEED_100_MBPS -100 Mbps |
| * PHY_SPEED_1000_MBPS -100 Mbps. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| |
| int32_t mv_switch_get_port_speed |
| ( |
| IN GT_LPORT port, |
| OUT GT_PHY_SPEED *speed |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_port_forced_link |
| * |
| * DESCRIPTION: |
| * This routine will disable auto-negotiation and set the PHY port speed . |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * |
| * enable- |
| * |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| |
| int32_t mv_switch_set_port_forced_link |
| ( |
| IN GT_LPORT port, |
| IN GT_BOOL enable |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_port_forced_link |
| * |
| * DESCRIPTION: |
| * Gets duplex mode for a specific logical port. |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * The physical address, if SERDES device is accessed |
| * |
| * OUTPUTS: |
| * enable - Forced Link mode :Enabled or Disabled |
| * |
| * RETURNS: |
| * GT_OK - on success |
| * GT_FAIL - on error |
| * |
| * COMMENTS: |
| * data sheet register 0.8 - Duplex Mode |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_forced_link |
| ( |
| IN GT_LPORT port, |
| OUT GT_BOOL* enable |
| ); |
| |
| |
| /******************************************************************************* |
| * mv_switch_set_port_link_value |
| * |
| * DESCRIPTION: |
| * This routine will disable auto-negotiation and set the PHY port speed . |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * |
| * enable - Forced Link Value : Enabled or Disabled |
| * |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_link_value |
| ( |
| IN GT_LPORT port, |
| IN GT_BOOL enable |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_port_link_value |
| * |
| * DESCRIPTION: |
| * This routine will disable auto-negotiation and set the PHY port speed . |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * |
| * enable - Forced Link Value : Enabled or Disabled |
| * |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| |
| int32_t mv_switch_get_port_link_value |
| ( |
| IN GT_LPORT port, |
| OUT GT_BOOL* enable |
| ); |
| |
| |
| |
| |
| |
| /*------------------------------------------------------------------------------ |
| Debug functions |
| ------------------------------------------------------------------------------*/ |
| |
| |
| /******************************************************************************* |
| * mv_switch_clear_port_counters |
| * |
| * DESCRIPTION: |
| * This function gets all counters of the given port |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * lport - Port number to write the register for. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * NONE. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_clear_port_counters |
| ( |
| void |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_global_reg |
| * |
| * DESCRIPTION: |
| * This function sets value to the global register. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * regAddr - The register's address. |
| * data - The data to be written. |
| * |
| * OUTPUTS: |
| * NONE. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * NONE. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_global_reg |
| ( |
| uint8_t regAddr, |
| uint16_t data |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_global_reg |
| * |
| * DESCRIPTION: |
| * This function gets value from the global register. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * regAddr - The register's address. |
| * |
| * OUTPUTS: |
| * data - The read register's data. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * NONE. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_global_reg |
| ( |
| uint8_t regAddr, |
| uint16_t *data |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_port_reg |
| * |
| * DESCRIPTION: |
| * This function sets value to the port register. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * lport - Port number to write the register for. |
| * regAddr - The register's address. |
| * data - The data to be written. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * NONE. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_reg |
| ( |
| uint8_t lport, |
| uint8_t regAddr, |
| uint16_t data |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_port_reg |
| * |
| * DESCRIPTION: |
| * This function gets value from the port register. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * lport - Port number to write the register for. |
| * regAddr - The register's address. |
| * |
| * OUTPUTS: |
| * data - The data to be written. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * NONE. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_reg |
| ( |
| uint8_t lport, |
| uint8_t regAddr, |
| uint16_t *data |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_print_port_counters |
| * |
| * DESCRIPTION: |
| * This function gets all counters of the given port |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * lport - Port number to write the register for. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * Clear on read. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_print_port_counters |
| ( |
| uint32_t lport |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_clean_port_counters |
| * |
| * DESCRIPTION: |
| * This function clean all counters of the given port |
| * |
| * INPUTS: |
| * owner_id - APP owner id, should be used for all API calls. |
| * lport - Port number to write the register for. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case, see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * NONE. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_clean_port_counters |
| ( |
| IN uint32_t lport |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_port_counters |
| * |
| * DESCRIPTION: |
| * This function gets all counters of the given port |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * lport - Port number to write the register for. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * Clear on read. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_counters |
| ( |
| uint32_t lport, |
| GT_STATS_COUNTER_SET3 *statsCounterSet |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_get_port_drop_counters |
| * |
| * DESCRIPTION: |
| * This function gets the port InDiscards, InFiltered, and OutFiltered counters. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * lport - Port number to write the register for. |
| * |
| * OUTPUTS: |
| * ctr - the counters value. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * Clear on read. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_get_port_drop_counters |
| ( |
| uint32_t lport, |
| GT_PORT_STAT2 *ctr |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_print_fdb |
| * |
| * DESCRIPTION: |
| * This function gets all FDB table. |
| * |
| * INPUTS: |
| * owner_id - APP owner id - should be used for all API calls. |
| * db_num - ATU MAC Address Database number. If multiple address |
| * databases are not being used, DBNum should be zero. |
| * If multiple address databases are being used, this value |
| * should be set to the desired address database number. |
| * |
| * OUTPUTS: |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * NONE. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_print_fdb |
| ( |
| uint16_t db_num |
| ); |
| /******************************************************************************* |
| * mv_switch_flush_vtu |
| * |
| * DESCRIPTION: |
| * Flush VTU on the Switch |
| * |
| * INPUTS: |
| * |
| * OUTPUTS: |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * NONE. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_flush_vtu(void); |
| |
| /******************************************************************************* |
| * mv_switch_flush_atu |
| * |
| * DESCRIPTION: |
| * Flush ATU on the Switch |
| * |
| * INPUTS: |
| * flush_cmd FLUSH all or FLUSH all dynamic |
| * db_num ATU DB Num, only 0 should be used, since there is only one ATU DB right now . |
| * |
| * OUTPUTS: |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * NONE. |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_flush_atu |
| ( |
| IN GT_FLUSH_CMD flush_cmd, |
| IN uint16_t db_num |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_port_speed_duplex_mode |
| * |
| * DESCRIPTION: |
| * This routine will disable auto-negotiation and set the PHY port speed and duplex mode. |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * |
| * speed - PHY_SPEED_10_MBPS -10 Mbps |
| * PHY_SPEED_100_MBPS -100 Mbps |
| * PHY_SPEED_1000_MBPS -100 Mbps. |
| * enable - Enable/Disable full duplex mode. |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_speed_duplex_mode |
| ( |
| IN GT_LPORT port, |
| IN GT_PHY_SPEED speed, |
| IN GT_BOOL enable |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_port_forced_fc_value |
| * |
| * DESCRIPTION: |
| * This routine will set forced flow control value when forced flow control enabled. |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * |
| * enable- |
| * |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_forced_fc_value |
| ( |
| IN GT_LPORT port, |
| IN GT_BOOL enable |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_set_port_forced_flow_control |
| * |
| * DESCRIPTION: |
| * This routine will enable/disable forced flow control state. |
| * |
| * INPUTS: |
| * port - The logical port number, unless SERDES device is accessed |
| * |
| * enable- |
| * |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case - see tpm_error_code_t. |
| * COMMENTS: |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_set_port_forced_flow_control |
| ( |
| IN GT_LPORT port, |
| IN GT_BOOL enable |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_port_add_vid_set_egrs_mode |
| * |
| * DESCRIPTION: |
| * The API adds a VID to the list of the allowed VIDs per lport |
| * and sets the egress mode for the port. |
| * |
| * INPUTS: |
| * lport - logic port id to set |
| * vid - vlan id |
| * gmac0Idx - port GMAC0 connects to |
| * eMode - egress mode |
| * |
| * OUTPUTS: |
| * None. |
| * |
| * RETURNS: |
| * On success - TPM_RC_OK. |
| * On error different types are returned according to the case see tpm_error_code_t. |
| * |
| * COMMENTS: |
| * MEMBER_EGRESS_UNMODIFIED - 0 |
| * NOT_A_MEMBER - 1 |
| * MEMBER_EGRESS_UNTAGGED - 2 |
| * MEMBER_EGRESS_TAGGED - 3 |
| * |
| *******************************************************************************/ |
| int32_t mv_switch_port_add_vid_set_egrs_mode |
| ( |
| IN uint32_t lport, |
| IN uint16_t vid, |
| IN uint16_t gmac0Idx, |
| IN uint8_t eMode |
| ); |
| |
| /******************************************************************************* |
| * mv_switch_drv_init |
| * |
| * DESCRIPTION: |
| * This function init all parameters |
| * |
| * INPUTS: |
| * NONE. |
| * |
| * OUTPUTS: |
| * NONE. |
| * |
| * RETURNS: |
| * NONE |
| * |
| * COMMENTS: |
| * There is a temprorary function. |
| * |
| *******************************************************************************/ |
| void mv_switch_drv_init |
| ( |
| void |
| ); |
| |