#ifndef __WINBOND_WB35REG_S_H
#define __WINBOND_WB35REG_S_H

#include <linux/spinlock.h>
#include <linux/types.h>
#include <asm/atomic.h>

//=======================================================================================
/*
				HAL setting function

		========================================
		|Uxx| 	|Dxx|	|Mxx|	|BB|	|RF|
		========================================
			|					|
		Wb35Reg_Read		Wb35Reg_Write

		----------------------------------------
				WbUsb_CallUSBDASync					supplied By WbUsb module
*/
//=======================================================================================

#define     GetBit( dwData, i)      ( dwData & (0x00000001 << i))
#define     SetBit( dwData, i)      ( dwData | (0x00000001 << i))
#define     ClearBit( dwData, i)    ( dwData & ~(0x00000001 << i))

#define		IGNORE_INCREMENT	0
#define		AUTO_INCREMENT		0
#define		NO_INCREMENT		1
#define REG_DIRECTION(_x,_y)   ((_y)->DIRECT ==0 ? usb_rcvctrlpipe(_x,0) : usb_sndctrlpipe(_x,0))
#define REG_BUF_SIZE(_x)       ((_x)->bRequest== 0x04 ? cpu_to_le16((_x)->wLength) : 4)

// 20060613.2 Add the follow definition
#define BB48_DEFAULT_AL2230_11B		0x0033447c
#define BB4C_DEFAULT_AL2230_11B		0x0A00FEFF
#define BB48_DEFAULT_AL2230_11G		0x00332C1B
#define BB4C_DEFAULT_AL2230_11G		0x0A00FEFF


#define BB48_DEFAULT_WB242_11B		0x00292315	//backoff  2dB
#define BB4C_DEFAULT_WB242_11B		0x0800FEFF	//backoff  2dB
//#define BB48_DEFAULT_WB242_11B		0x00201B11	//backoff  4dB
//#define BB4C_DEFAULT_WB242_11B		0x0600FF00	//backoff  4dB
#define BB48_DEFAULT_WB242_11G		0x00453B24
#define BB4C_DEFAULT_WB242_11G		0x0E00FEFF

//====================================
// Default setting for Mxx
//====================================
#define DEFAULT_CWMIN					31		//(M2C) CWmin. Its value is in the range 0-31.
#define DEFAULT_CWMAX					1023	//(M2C) CWmax. Its value is in the range 0-1023.
#define DEFAULT_AID						1		//(M34) AID. Its value is in the range 1-2007.

#ifdef _USE_FALLBACK_RATE_
#define DEFAULT_RATE_RETRY_LIMIT		2		//(M38) as named
#else
#define DEFAULT_RATE_RETRY_LIMIT		7		//(M38) as named
#endif

#define DEFAULT_LONG_RETRY_LIMIT		7		//(M38) LongRetryLimit. Its value is in the range 0-15.
#define DEFAULT_SHORT_RETRY_LIMIT		7		//(M38) ShortRetryLimit. Its value is in the range 0-15.
#define DEFAULT_PIFST					25		//(M3C) PIFS Time. Its value is in the range 0-65535.
#define DEFAULT_EIFST					354		//(M3C) EIFS Time. Its value is in the range 0-1048575.
#define DEFAULT_DIFST					45		//(M3C) DIFS Time. Its value is in the range 0-65535.
#define DEFAULT_SIFST					5		//(M3C) SIFS Time. Its value is in the range 0-65535.
#define DEFAULT_OSIFST					10		//(M3C) Original SIFS Time. Its value is in the range 0-15.
#define DEFAULT_ATIMWD					0		//(M40) ATIM Window. Its value is in the range 0-65535.
#define DEFAULT_SLOT_TIME				20		//(M40) ($) SlotTime. Its value is in the range 0-255.
#define DEFAULT_MAX_TX_MSDU_LIFE_TIME	512	//(M44) MaxTxMSDULifeTime. Its value is in the range 0-4294967295.
#define DEFAULT_BEACON_INTERVAL			500		//(M48) Beacon Interval. Its value is in the range 0-65535.
#define DEFAULT_PROBE_DELAY_TIME		200		//(M48) Probe Delay Time. Its value is in the range 0-65535.
#define DEFAULT_PROTOCOL_VERSION		0		//(M4C)
#define DEFAULT_MAC_POWER_STATE			2		//(M4C) 2: MAC at power active
#define DEFAULT_DTIM_ALERT_TIME			0


struct wb35_reg_queue {
	struct urb 	*urb;
	void		*pUsbReq;
	void		*Next;
	union {
		u32	VALUE;
		u32	*pBuffer;
	};
	u8		RESERVED[4]; // space reserved for communication
	u16		INDEX; // For storing the register index
	u8		RESERVED_VALID;	// Indicate whether the RESERVED space is valid at this command.
	u8		DIRECT; // 0:In   1:Out
};

//====================================
// Internal variable for module
//====================================
#define MAX_SQ3_FILTER_SIZE		5
struct wb35_reg {
	//============================
	// Register Bank backup
	//============================
	u32	U1B0;			//bit16 record the h/w radio on/off status
	u32	U1BC_LEDConfigure;
	u32	D00_DmaControl;
	u32	M00_MacControl;
	union {
		struct {
			u32	M04_MulticastAddress1;
			u32	M08_MulticastAddress2;
		};
		u8		Multicast[8];	// contents of card multicast registers
	};

	u32	M24_MacControl;
	u32	M28_MacControl;
	u32	M2C_MacControl;
	u32	M38_MacControl;
	u32	M3C_MacControl; // 20060214 backup only
	u32	M40_MacControl;
	u32	M44_MacControl; // 20060214 backup only
	u32	M48_MacControl; // 20060214 backup only
	u32	M4C_MacStatus;
	u32	M60_MacControl; // 20060214 backup only
	u32	M68_MacControl; // 20060214 backup only
	u32	M70_MacControl; // 20060214 backup only
	u32	M74_MacControl; // 20060214 backup only
	u32	M78_ERPInformation;//930206.2.b
	u32	M7C_MacControl; // 20060214 backup only
	u32	M80_MacControl; // 20060214 backup only
	u32	M84_MacControl; // 20060214 backup only
	u32	M88_MacControl; // 20060214 backup only
	u32	M98_MacControl; // 20060214 backup only

	//[20040722 WK]
	//Baseband register
	u32	BB0C;	// Used for LNA calculation
	u32	BB2C;	//
	u32	BB30;	//11b acquisition control register
	u32	BB3C;
	u32	BB48;	// 20051221.1.a 20060613.1 Fix OBW issue of 11b/11g rate
	u32	BB4C;	// 20060613.1  Fix OBW issue of 11b/11g rate
	u32	BB50;	//mode control register
	u32	BB54;
	u32 	BB58;	//IQ_ALPHA
	u32	BB5C;	// For test
	u32	BB60;	// for WTO read value

	//-------------------
	// VM
	//-------------------
	spinlock_t	EP0VM_spin_lock; // 4B
	u32	        EP0VM_status;//$$
	struct wb35_reg_queue *reg_first;
	struct wb35_reg_queue *reg_last;
	atomic_t       RegFireCount;

	// Hardware status
	u8	EP0vm_state;
	u8	mac_power_save;
	u8	EEPROMPhyType; // 0 ~ 15 for Maxim (0 ĄV MAX2825, 1 ĄV MAX2827, 2 ĄV MAX2828, 3 ĄV MAX2829),
						   // 16 ~ 31 for Airoha (16 ĄV AL2230, 11 - AL7230)
						   // 32 ~ Reserved
						   // 33 ~ 47 For WB242 ( 33 - WB242, 34 - WB242 with new Txvga 0.5 db step)
						   // 48 ~ 255 ARE RESERVED.
	u8	EEPROMRegion;	//Region setting in EEPROM

	u32	SyncIoPause; // If user use the Sync Io to access Hw, then pause the async access

	u8	LNAValue[4]; //Table for speed up running
	u32	SQ3_filter[MAX_SQ3_FILTER_SIZE];
	u32	SQ3_index;

};

#endif