/*
 *************************************************************************
 * Ralink Tech Inc.
 * 5F., No.36, Taiyuan St., Jhubei City,
 * Hsinchu County 302,
 * Taiwan, R.O.C.
 *
 * (c) Copyright 2002-2007, Ralink Technology, Inc.
 *
 * This program is free software; you can redistribute it and/or modify  *
 * it under the terms of the GNU General Public License as published by  *
 * the Free Software Foundation; either version 2 of the License, or     *
 * (at your option) any later version.                                   *
 *                                                                       *
 * This program is distributed in the hope that it will be useful,       *
 * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
 * GNU General Public License for more details.                          *
 *                                                                       *
 * You should have received a copy of the GNU General Public License     *
 * along with this program; if not, write to the                         *
 * Free Software Foundation, Inc.,                                       *
 * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
 *                                                                       *
 *************************************************************************

	Module Name:
	mlme.c

	Abstract:

	Revision History:
	Who			When			What
	--------	----------		----------------------------------------------
	John Chang	2004-08-25		Modify from RT2500 code base
	John Chang	2004-09-06		modified for RT2600
*/

#include "../rt_config.h"
#include <stdarg.h>

UCHAR	CISCO_OUI[] = {0x00, 0x40, 0x96};

UCHAR	WPA_OUI[] = {0x00, 0x50, 0xf2, 0x01};
UCHAR	RSN_OUI[] = {0x00, 0x0f, 0xac};
UCHAR	WAPI_OUI[] = {0x00, 0x14, 0x72};
UCHAR   WME_INFO_ELEM[]  = {0x00, 0x50, 0xf2, 0x02, 0x00, 0x01};
UCHAR   WME_PARM_ELEM[] = {0x00, 0x50, 0xf2, 0x02, 0x01, 0x01};
UCHAR	Ccx2QosInfo[] = {0x00, 0x40, 0x96, 0x04};
UCHAR   RALINK_OUI[]  = {0x00, 0x0c, 0x43};
UCHAR   BROADCOM_OUI[]  = {0x00, 0x90, 0x4c};
UCHAR   WPS_OUI[] = {0x00, 0x50, 0xf2, 0x04};
#ifdef CONFIG_STA_SUPPORT
#ifdef DOT11_N_SUPPORT
UCHAR	PRE_N_HT_OUI[]	= {0x00, 0x90, 0x4c};
#endif // DOT11_N_SUPPORT //
#endif // CONFIG_STA_SUPPORT //

UCHAR RateSwitchTable[] = {
// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
    0x11, 0x00,  0,  0,  0,						// Initial used item after association
    0x00, 0x00,  0, 40, 101,
    0x01, 0x00,  1, 40, 50,
    0x02, 0x00,  2, 35, 45,
    0x03, 0x00,  3, 20, 45,
    0x04, 0x21,  0, 30, 50,
    0x05, 0x21,  1, 20, 50,
    0x06, 0x21,  2, 20, 50,
    0x07, 0x21,  3, 15, 50,
    0x08, 0x21,  4, 15, 30,
    0x09, 0x21,  5, 10, 25,
    0x0a, 0x21,  6,  8, 25,
    0x0b, 0x21,  7,  8, 25,
    0x0c, 0x20, 12,  15, 30,
    0x0d, 0x20, 13,  8, 20,
    0x0e, 0x20, 14,  8, 20,
    0x0f, 0x20, 15,  8, 25,
    0x10, 0x22, 15,  8, 25,
    0x11, 0x00,  0,  0,  0,
    0x12, 0x00,  0,  0,  0,
    0x13, 0x00,  0,  0,  0,
    0x14, 0x00,  0,  0,  0,
    0x15, 0x00,  0,  0,  0,
    0x16, 0x00,  0,  0,  0,
    0x17, 0x00,  0,  0,  0,
    0x18, 0x00,  0,  0,  0,
    0x19, 0x00,  0,  0,  0,
    0x1a, 0x00,  0,  0,  0,
    0x1b, 0x00,  0,  0,  0,
    0x1c, 0x00,  0,  0,  0,
    0x1d, 0x00,  0,  0,  0,
    0x1e, 0x00,  0,  0,  0,
    0x1f, 0x00,  0,  0,  0,
};

UCHAR RateSwitchTable11B[] = {
// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
    0x04, 0x03,  0,  0,  0,						// Initial used item after association
    0x00, 0x00,  0, 40, 101,
    0x01, 0x00,  1, 40, 50,
    0x02, 0x00,  2, 35, 45,
    0x03, 0x00,  3, 20, 45,
};

UCHAR RateSwitchTable11BG[] = {
// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
    0x0a, 0x00,  0,  0,  0,						// Initial used item after association
    0x00, 0x00,  0, 40, 101,
    0x01, 0x00,  1, 40, 50,
    0x02, 0x00,  2, 35, 45,
    0x03, 0x00,  3, 20, 45,
    0x04, 0x10,  2, 20, 35,
    0x05, 0x10,  3, 16, 35,
    0x06, 0x10,  4, 10, 25,
    0x07, 0x10,  5, 16, 25,
    0x08, 0x10,  6, 10, 25,
    0x09, 0x10,  7, 10, 13,
};

UCHAR RateSwitchTable11G[] = {
// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
    0x08, 0x00,  0,  0,  0,						// Initial used item after association
    0x00, 0x10,  0, 20, 101,
    0x01, 0x10,  1, 20, 35,
    0x02, 0x10,  2, 20, 35,
    0x03, 0x10,  3, 16, 35,
    0x04, 0x10,  4, 10, 25,
    0x05, 0x10,  5, 16, 25,
    0x06, 0x10,  6, 10, 25,
    0x07, 0x10,  7, 10, 13,
};

#ifdef DOT11_N_SUPPORT
UCHAR RateSwitchTable11N1S[] = {
// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
    0x0c, 0x0a,  0,  0,  0,						// Initial used item after association
    0x00, 0x00,  0, 40, 101,
    0x01, 0x00,  1, 40, 50,
    0x02, 0x00,  2, 25, 45,
    0x03, 0x21,  0, 20, 35,
    0x04, 0x21,  1, 20, 35,
    0x05, 0x21,  2, 20, 35,
    0x06, 0x21,  3, 15, 35,
    0x07, 0x21,  4, 15, 30,
    0x08, 0x21,  5, 10, 25,
    0x09, 0x21,  6,  8, 14,
    0x0a, 0x21,  7,  8, 14,
    0x0b, 0x23,  7,  8, 14,
};

UCHAR RateSwitchTable11N2S[] = {
// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
    0x0e, 0x0c,  0,  0,  0,						// Initial used item after association
    0x00, 0x00,  0, 40, 101,
    0x01, 0x00,  1, 40, 50,
    0x02, 0x00,  2, 25, 45,
    0x03, 0x21,  0, 20, 35,
    0x04, 0x21,  1, 20, 35,
    0x05, 0x21,  2, 20, 35,
    0x06, 0x21,  3, 15, 35,
    0x07, 0x21,  4, 15, 30,
    0x08, 0x20, 11, 15, 30,
    0x09, 0x20, 12, 15, 30,
    0x0a, 0x20, 13,  8, 20,
    0x0b, 0x20, 14,  8, 20,
    0x0c, 0x20, 15,  8, 25,
    0x0d, 0x22, 15,  8, 15,
};

UCHAR RateSwitchTable11N3S[] = {
// Item No.	Mode	Curr-MCS	TrainUp	TrainDown	// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
    0x0b, 0x00,  0,  0,  0,	// 0x0a, 0x00,  0,  0,  0,      // Initial used item after association
    0x00, 0x21,  0, 30, 101,
    0x01, 0x21,  1, 20, 50,
    0x02, 0x21,  2, 20, 50,
    0x03, 0x21,  3, 15, 50,
    0x04, 0x21,  4, 15, 30,
    0x05, 0x20, 11, 15, 30,	// Required by System-Alan @ 20080812
    0x06, 0x20, 12, 15, 30,	// 0x05, 0x20, 12, 15, 30,
    0x07, 0x20, 13,  8, 20,	// 0x06, 0x20, 13,  8, 20,
    0x08, 0x20, 14,  8, 20,	// 0x07, 0x20, 14,  8, 20,
    0x09, 0x20, 15,  8, 25,	// 0x08, 0x20, 15,  8, 25,
    0x0a, 0x22, 15,  8, 25,	// 0x09, 0x22, 15,  8, 25,
};

UCHAR RateSwitchTable11N2SForABand[] = {
// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
    0x0b, 0x09,  0,  0,  0,						// Initial used item after association
    0x00, 0x21,  0, 30, 101,
    0x01, 0x21,  1, 20, 50,
    0x02, 0x21,  2, 20, 50,
    0x03, 0x21,  3, 15, 50,
    0x04, 0x21,  4, 15, 30,
    0x05, 0x21,  5, 15, 30,
    0x06, 0x20, 12,  15, 30,
    0x07, 0x20, 13,  8, 20,
    0x08, 0x20, 14,  8, 20,
    0x09, 0x20, 15,  8, 25,
    0x0a, 0x22, 15,  8, 25,
};

UCHAR RateSwitchTable11N3SForABand[] = { // 3*3
// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
    0x0b, 0x09,  0,  0,  0,						// Initial used item after association
    0x00, 0x21,  0, 30, 101,
    0x01, 0x21,  1, 20, 50,
    0x02, 0x21,  2, 20, 50,
    0x03, 0x21,  3, 15, 50,
    0x04, 0x21,  4, 15, 30,
    0x05, 0x21,  5, 15, 30,
    0x06, 0x20, 12,  15, 30,
    0x07, 0x20, 13,  8, 20,
    0x08, 0x20, 14,  8, 20,
    0x09, 0x20, 15,  8, 25,
    0x0a, 0x22, 15,  8, 25,
};

UCHAR RateSwitchTable11BGN1S[] = {
// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
    0x0c, 0x0a,  0,  0,  0,						// Initial used item after association
    0x00, 0x00,  0, 40, 101,
    0x01, 0x00,  1, 40, 50,
    0x02, 0x00,  2, 25, 45,
    0x03, 0x21,  0, 20, 35,
    0x04, 0x21,  1, 20, 35,
    0x05, 0x21,  2, 20, 35,
    0x06, 0x21,  3, 15, 35,
    0x07, 0x21,  4, 15, 30,
    0x08, 0x21,  5, 10, 25,
    0x09, 0x21,  6,  8, 14,
    0x0a, 0x21,  7,  8, 14,
    0x0b, 0x23,  7,  8, 14,
};

UCHAR RateSwitchTable11BGN2S[] = {
// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
    0x0e, 0x0c,  0,  0,  0,						// Initial used item after association
    0x00, 0x00,  0, 40, 101,
    0x01, 0x00,  1, 40, 50,
    0x02, 0x00,  2, 25, 45,
    0x03, 0x21,  0, 20, 35,
    0x04, 0x21,  1, 20, 35,
    0x05, 0x21,  2, 20, 35,
    0x06, 0x21,  3, 15, 35,
    0x07, 0x21,  4, 15, 30,
    0x08, 0x20, 11, 15, 30,
    0x09, 0x20, 12, 15, 30,
    0x0a, 0x20, 13,  8, 20,
    0x0b, 0x20, 14,  8, 20,
    0x0c, 0x20, 15,  8, 25,
    0x0d, 0x22, 15,  8, 15,
};

UCHAR RateSwitchTable11BGN3S[] = { // 3*3
// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
    0x0a, 0x00,  0,  0,  0,						// Initial used item after association
    0x00, 0x21,  0, 30,101,	//50
    0x01, 0x21,  1, 20, 50,
    0x02, 0x21,  2, 20, 50,
    0x03, 0x21,  3, 20, 50,
    0x04, 0x21,  4, 15, 50,
    0x05, 0x20, 20, 15, 30,
    0x06, 0x20, 21,  8, 20,
    0x07, 0x20, 22,  8, 20,
    0x08, 0x20, 23,  8, 25,
    0x09, 0x22, 23,  8, 25,
};

UCHAR RateSwitchTable11BGN2SForABand[] = {
// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
    0x0b, 0x09,  0,  0,  0,						// Initial used item after association
    0x00, 0x21,  0, 30,101,	//50
    0x01, 0x21,  1, 20, 50,
    0x02, 0x21,  2, 20, 50,
    0x03, 0x21,  3, 15, 50,
    0x04, 0x21,  4, 15, 30,
    0x05, 0x21,  5, 15, 30,
    0x06, 0x20, 12, 15, 30,
    0x07, 0x20, 13,  8, 20,
    0x08, 0x20, 14,  8, 20,
    0x09, 0x20, 15,  8, 25,
    0x0a, 0x22, 15,  8, 25,
};

UCHAR RateSwitchTable11BGN3SForABand[] = { // 3*3
// Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
    0x0c, 0x09,  0,  0,  0,						// Initial used item after association
    0x00, 0x21,  0, 30,101,	//50
    0x01, 0x21,  1, 20, 50,
    0x02, 0x21,  2, 20, 50,
    0x03, 0x21,  3, 15, 50,
    0x04, 0x21,  4, 15, 30,
    0x05, 0x21,  5, 15, 30,
    0x06, 0x21, 12, 15, 30,
    0x07, 0x20, 20, 15, 30,
    0x08, 0x20, 21,  8, 20,
    0x09, 0x20, 22,  8, 20,
    0x0a, 0x20, 23,  8, 25,
    0x0b, 0x22, 23,  8, 25,
};
#endif // DOT11_N_SUPPORT //


extern UCHAR	 OfdmRateToRxwiMCS[];
// since RT61 has better RX sensibility, we have to limit TX ACK rate not to exceed our normal data TX rate.
// otherwise the WLAN peer may not be able to receive the ACK thus downgrade its data TX rate
ULONG BasicRateMask[12]				= {0xfffff001 /* 1-Mbps */, 0xfffff003 /* 2 Mbps */, 0xfffff007 /* 5.5 */, 0xfffff00f /* 11 */,
									  0xfffff01f /* 6 */	 , 0xfffff03f /* 9 */	  , 0xfffff07f /* 12 */ , 0xfffff0ff /* 18 */,
									  0xfffff1ff /* 24 */	 , 0xfffff3ff /* 36 */	  , 0xfffff7ff /* 48 */ , 0xffffffff /* 54 */};

UCHAR BROADCAST_ADDR[MAC_ADDR_LEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
UCHAR ZERO_MAC_ADDR[MAC_ADDR_LEN]  = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};

// e.g. RssiSafeLevelForTxRate[RATE_36]" means if the current RSSI is greater than
//		this value, then it's quaranteed capable of operating in 36 mbps TX rate in
//		clean environment.
//								  TxRate: 1   2   5.5	11	 6	  9    12	18	 24   36   48	54	 72  100
CHAR RssiSafeLevelForTxRate[] ={  -92, -91, -90, -87, -88, -86, -85, -83, -81, -78, -72, -71, -40, -40 };

UCHAR  RateIdToMbps[]	 = { 1, 2, 5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 72, 100};
USHORT RateIdTo500Kbps[] = { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108, 144, 200};

UCHAR  SsidIe	 = IE_SSID;
UCHAR  SupRateIe = IE_SUPP_RATES;
UCHAR  ExtRateIe = IE_EXT_SUPP_RATES;
#ifdef DOT11_N_SUPPORT
UCHAR  HtCapIe = IE_HT_CAP;
UCHAR  AddHtInfoIe = IE_ADD_HT;
UCHAR  NewExtChanIe = IE_SECONDARY_CH_OFFSET;
#ifdef DOT11N_DRAFT3
UCHAR  ExtHtCapIe = IE_EXT_CAPABILITY;
#endif // DOT11N_DRAFT3 //
#endif // DOT11_N_SUPPORT //
UCHAR  ErpIe	 = IE_ERP;
UCHAR  DsIe	 = IE_DS_PARM;
UCHAR  TimIe	 = IE_TIM;
UCHAR  WpaIe	 = IE_WPA;
UCHAR  Wpa2Ie	 = IE_WPA2;
UCHAR  IbssIe	 = IE_IBSS_PARM;
UCHAR  Ccx2Ie	 = IE_CCX_V2;
UCHAR  WapiIe	 = IE_WAPI;

extern UCHAR	WPA_OUI[];

UCHAR	SES_OUI[] = {0x00, 0x90, 0x4c};

UCHAR	ZeroSsid[32] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};


/*
	==========================================================================
	Description:
		initialize the MLME task and its data structure (queue, spinlock,
		timer, state machines).

	IRQL = PASSIVE_LEVEL

	Return:
		always return NDIS_STATUS_SUCCESS

	==========================================================================
*/
NDIS_STATUS MlmeInit(
	IN PRTMP_ADAPTER pAd)
{
	NDIS_STATUS Status = NDIS_STATUS_SUCCESS;

	DBGPRINT(RT_DEBUG_TRACE, ("--> MLME Initialize\n"));

	do
	{
		Status = MlmeQueueInit(&pAd->Mlme.Queue);
		if(Status != NDIS_STATUS_SUCCESS)
			break;

		pAd->Mlme.bRunning = FALSE;
		NdisAllocateSpinLock(&pAd->Mlme.TaskLock);

#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		{
			BssTableInit(&pAd->ScanTab);

			// init STA state machines
			AssocStateMachineInit(pAd, &pAd->Mlme.AssocMachine, pAd->Mlme.AssocFunc);
			AuthStateMachineInit(pAd, &pAd->Mlme.AuthMachine, pAd->Mlme.AuthFunc);
			AuthRspStateMachineInit(pAd, &pAd->Mlme.AuthRspMachine, pAd->Mlme.AuthRspFunc);
			SyncStateMachineInit(pAd, &pAd->Mlme.SyncMachine, pAd->Mlme.SyncFunc);

#ifdef QOS_DLS_SUPPORT
			DlsStateMachineInit(pAd, &pAd->Mlme.DlsMachine, pAd->Mlme.DlsFunc);
#endif // QOS_DLS_SUPPORT //


			// Since we are using switch/case to implement it, the init is different from the above
			// state machine init
			MlmeCntlInit(pAd, &pAd->Mlme.CntlMachine, NULL);
		}
#endif // CONFIG_STA_SUPPORT //


		WpaStateMachineInit(pAd, &pAd->Mlme.WpaMachine, pAd->Mlme.WpaFunc);


		ActionStateMachineInit(pAd, &pAd->Mlme.ActMachine, pAd->Mlme.ActFunc);

		// Init mlme periodic timer
		RTMPInitTimer(pAd, &pAd->Mlme.PeriodicTimer, GET_TIMER_FUNCTION(MlmePeriodicExec), pAd, TRUE);

		// Set mlme periodic timer
		RTMPSetTimer(&pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV);

		// software-based RX Antenna diversity
		RTMPInitTimer(pAd, &pAd->Mlme.RxAntEvalTimer, GET_TIMER_FUNCTION(AsicRxAntEvalTimeout), pAd, FALSE);


#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		{
#ifdef RTMP_PCI_SUPPORT
			if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE))
			{
			    // only PCIe cards need these two timers
				RTMPInitTimer(pAd, &pAd->Mlme.PsPollTimer, GET_TIMER_FUNCTION(PsPollWakeExec), pAd, FALSE);
				RTMPInitTimer(pAd, &pAd->Mlme.RadioOnOffTimer, GET_TIMER_FUNCTION(RadioOnExec), pAd, FALSE);
			}
#endif // RTMP_PCI_SUPPORT //

			RTMPInitTimer(pAd, &pAd->Mlme.LinkDownTimer, GET_TIMER_FUNCTION(LinkDownExec), pAd, FALSE);

		}
#endif // CONFIG_STA_SUPPORT //

	} while (FALSE);

	DBGPRINT(RT_DEBUG_TRACE, ("<-- MLME Initialize\n"));

	return Status;
}

/*
	==========================================================================
	Description:
		main loop of the MLME
	Pre:
		Mlme has to be initialized, and there are something inside the queue
	Note:
		This function is invoked from MPSetInformation and MPReceive;
		This task guarantee only one MlmeHandler will run.

	IRQL = DISPATCH_LEVEL

	==========================================================================
 */
VOID MlmeHandler(
	IN PRTMP_ADAPTER pAd)
{
	MLME_QUEUE_ELEM		   *Elem = NULL;
#ifdef APCLI_SUPPORT
	SHORT apcliIfIndex;
#endif // APCLI_SUPPORT //

	// Only accept MLME and Frame from peer side, no other (control/data) frame should
	// get into this state machine

	NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
	if(pAd->Mlme.bRunning)
	{
		NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
		return;
	}
	else
	{
		pAd->Mlme.bRunning = TRUE;
	}
	NdisReleaseSpinLock(&pAd->Mlme.TaskLock);

	while (!MlmeQueueEmpty(&pAd->Mlme.Queue))
	{
		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_MLME_RESET_IN_PROGRESS) ||
			RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS) ||
			RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
		{
			DBGPRINT(RT_DEBUG_TRACE, ("Device Halted or Removed or MlmeRest, exit MlmeHandler! (queue num = %ld)\n", pAd->Mlme.Queue.Num));
			break;
		}

#ifdef RALINK_ATE
		if(ATE_ON(pAd))
		{
			DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now in MlmeHandler\n"));
			break;
		}
#endif // RALINK_ATE //

		//From message type, determine which state machine I should drive
		if (MlmeDequeue(&pAd->Mlme.Queue, &Elem))
		{

			// if dequeue success
			switch (Elem->Machine)
			{
				// STA state machines
#ifdef CONFIG_STA_SUPPORT
				case ASSOC_STATE_MACHINE:
					StateMachinePerformAction(pAd, &pAd->Mlme.AssocMachine, Elem);
					break;
				case AUTH_STATE_MACHINE:
					StateMachinePerformAction(pAd, &pAd->Mlme.AuthMachine, Elem);
					break;
				case AUTH_RSP_STATE_MACHINE:
					StateMachinePerformAction(pAd, &pAd->Mlme.AuthRspMachine, Elem);
					break;
				case SYNC_STATE_MACHINE:
					StateMachinePerformAction(pAd, &pAd->Mlme.SyncMachine, Elem);
					break;
				case MLME_CNTL_STATE_MACHINE:
					MlmeCntlMachinePerformAction(pAd, &pAd->Mlme.CntlMachine, Elem);
					break;
				case WPA_PSK_STATE_MACHINE:
					StateMachinePerformAction(pAd, &pAd->Mlme.WpaPskMachine, Elem);
					break;

#ifdef QOS_DLS_SUPPORT
				case DLS_STATE_MACHINE:
					StateMachinePerformAction(pAd, &pAd->Mlme.DlsMachine, Elem);
					break;
#endif // QOS_DLS_SUPPORT //

#endif // CONFIG_STA_SUPPORT //

				case ACTION_STATE_MACHINE:
					StateMachinePerformAction(pAd, &pAd->Mlme.ActMachine, Elem);
					break;

				case WPA_STATE_MACHINE:
					StateMachinePerformAction(pAd, &pAd->Mlme.WpaMachine, Elem);
					break;


				default:
					DBGPRINT(RT_DEBUG_TRACE, ("ERROR: Illegal machine %ld in MlmeHandler()\n", Elem->Machine));
					break;
			} // end of switch

			// free MLME element
			Elem->Occupied = FALSE;
			Elem->MsgLen = 0;

		}
		else {
			DBGPRINT_ERR(("MlmeHandler: MlmeQueue empty\n"));
		}
	}

	NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
	pAd->Mlme.bRunning = FALSE;
	NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
}

/*
	==========================================================================
	Description:
		Destructor of MLME (Destroy queue, state machine, spin lock and timer)
	Parameters:
		Adapter - NIC Adapter pointer
	Post:
		The MLME task will no longer work properly

	IRQL = PASSIVE_LEVEL

	==========================================================================
 */
VOID MlmeHalt(
	IN PRTMP_ADAPTER pAd)
{
	BOOLEAN		  Cancelled;

	DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeHalt\n"));

	if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
	{
		// disable BEACON generation and other BEACON related hardware timers
		AsicDisableSync(pAd);
	}

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
#ifdef QOS_DLS_SUPPORT
		UCHAR		i;
#endif // QOS_DLS_SUPPORT //
		// Cancel pending timers
		RTMPCancelTimer(&pAd->MlmeAux.AssocTimer,		&Cancelled);
		RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer,		&Cancelled);
		RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer,	&Cancelled);
		RTMPCancelTimer(&pAd->MlmeAux.AuthTimer,		&Cancelled);
		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,		&Cancelled);
		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,		&Cancelled);


#ifdef RTMP_MAC_PCI
	    if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE)
			&&(pAd->StaCfg.PSControl.field.EnableNewPS == TRUE))
	    {
		    RTMPCancelTimer(&pAd->Mlme.PsPollTimer,		&Cancelled);
		    RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer,		&Cancelled);
		}
#endif // RTMP_MAC_PCI //

#ifdef QOS_DLS_SUPPORT
		for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
		{
			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &Cancelled);
		}
#endif // QOS_DLS_SUPPORT //
		RTMPCancelTimer(&pAd->Mlme.LinkDownTimer,		&Cancelled);

	}
#endif // CONFIG_STA_SUPPORT //

	RTMPCancelTimer(&pAd->Mlme.PeriodicTimer,		&Cancelled);
	RTMPCancelTimer(&pAd->Mlme.RxAntEvalTimer,		&Cancelled);


	if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
	{
		RTMP_CHIP_OP *pChipOps = &pAd->chipOps;

		// Set LED
		RTMPSetLED(pAd, LED_HALT);
		RTMPSetSignalLED(pAd, -100);	// Force signal strength Led to be turned off, firmware is not done it.

		if (pChipOps->AsicHaltAction)
			pChipOps->AsicHaltAction(pAd);
	}

	RTMPusecDelay(5000);    //  5 msec to gurantee Ant Diversity timer canceled

	MlmeQueueDestroy(&pAd->Mlme.Queue);
	NdisFreeSpinLock(&pAd->Mlme.TaskLock);

	DBGPRINT(RT_DEBUG_TRACE, ("<== MlmeHalt\n"));
}

VOID MlmeResetRalinkCounters(
	IN  PRTMP_ADAPTER   pAd)
{
	pAd->RalinkCounters.LastOneSecRxOkDataCnt = pAd->RalinkCounters.OneSecRxOkDataCnt;
	// clear all OneSecxxx counters.
	pAd->RalinkCounters.OneSecBeaconSentCnt = 0;
	pAd->RalinkCounters.OneSecFalseCCACnt = 0;
	pAd->RalinkCounters.OneSecRxFcsErrCnt = 0;
	pAd->RalinkCounters.OneSecRxOkCnt = 0;
	pAd->RalinkCounters.OneSecTxFailCount = 0;
	pAd->RalinkCounters.OneSecTxNoRetryOkCount = 0;
	pAd->RalinkCounters.OneSecTxRetryOkCount = 0;
	pAd->RalinkCounters.OneSecRxOkDataCnt = 0;
	pAd->RalinkCounters.OneSecReceivedByteCount = 0;
	pAd->RalinkCounters.OneSecTransmittedByteCount = 0;

	// TODO: for debug only. to be removed
	pAd->RalinkCounters.OneSecOsTxCount[QID_AC_BE] = 0;
	pAd->RalinkCounters.OneSecOsTxCount[QID_AC_BK] = 0;
	pAd->RalinkCounters.OneSecOsTxCount[QID_AC_VI] = 0;
	pAd->RalinkCounters.OneSecOsTxCount[QID_AC_VO] = 0;
	pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_BE] = 0;
	pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_BK] = 0;
	pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_VI] = 0;
	pAd->RalinkCounters.OneSecDmaDoneCount[QID_AC_VO] = 0;
	pAd->RalinkCounters.OneSecTxDoneCount = 0;
	pAd->RalinkCounters.OneSecRxCount = 0;
	pAd->RalinkCounters.OneSecTxAggregationCount = 0;
	pAd->RalinkCounters.OneSecRxAggregationCount = 0;

	return;
}


/*
	==========================================================================
	Description:
		This routine is executed periodically to -
		1. Decide if it's a right time to turn on PwrMgmt bit of all
		   outgoiing frames
		2. Calculate ChannelQuality based on statistics of the last
		   period, so that TX rate won't toggling very frequently between a
		   successful TX and a failed TX.
		3. If the calculated ChannelQuality indicated current connection not
		   healthy, then a ROAMing attempt is tried here.

	IRQL = DISPATCH_LEVEL

	==========================================================================
 */
#define ADHOC_BEACON_LOST_TIME		(8*OS_HZ)  // 8 sec
VOID MlmePeriodicExec(
	IN PVOID SystemSpecific1,
	IN PVOID FunctionContext,
	IN PVOID SystemSpecific2,
	IN PVOID SystemSpecific3)
{
	ULONG			TxTotalCnt;
	PRTMP_ADAPTER	pAd = (RTMP_ADAPTER *)FunctionContext;
	SHORT	realavgrssi;

#ifdef CONFIG_STA_SUPPORT
#ifdef RTMP_MAC_PCI
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
	    // If Hardware controlled Radio enabled, we have to check GPIO pin2 every 2 second.
		// Move code to here, because following code will return when radio is off
		if ((pAd->Mlme.PeriodicRound % (MLME_TASK_EXEC_MULTIPLE * 2) == 0) && (pAd->StaCfg.bHardwareRadio == TRUE) &&
			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))
			/*&&(pAd->bPCIclkOff == FALSE)*/)
		{
			UINT32				data = 0;

			// Read GPIO pin2 as Hardware controlled radio state
#ifndef RT3090
			RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &data);
#endif // RT3090 //
//KH(PCIE PS):Added based on Jane<--
#ifdef RT3090
// Read GPIO pin2 as Hardware controlled radio state
// We need to Read GPIO if HW said so no mater what advance power saving
if ((pAd->OpMode == OPMODE_STA) && (IDLE_ON(pAd))
	&& (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF))
	&& (pAd->StaCfg.PSControl.field.EnablePSinIdle == TRUE))
	{
	// Want to make sure device goes to L0 state before reading register.
	RTMPPCIeLinkCtrlValueRestore(pAd, 0);
	RTMP_IO_FORCE_READ32(pAd, GPIO_CTRL_CFG, &data);
	RTMPPCIeLinkCtrlSetting(pAd, 3);
	}
else
	RTMP_IO_FORCE_READ32(pAd, GPIO_CTRL_CFG, &data);
#endif // RT3090 //
//KH(PCIE PS):Added based on Jane-->

			if (data & 0x04)
			{
				pAd->StaCfg.bHwRadio = TRUE;
			}
			else
			{
				pAd->StaCfg.bHwRadio = FALSE;
			}
			if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
			{
				pAd->StaCfg.bRadio = (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio);
				if (pAd->StaCfg.bRadio == TRUE)
				{
					MlmeRadioOn(pAd);
					// Update extra information
					pAd->ExtraInfo = EXTRA_INFO_CLEAR;
				}
				else
				{
					MlmeRadioOff(pAd);
					// Update extra information
					pAd->ExtraInfo = HW_RADIO_OFF;
				}
			}
		}
	}
#endif // RTMP_MAC_PCI //
#endif // CONFIG_STA_SUPPORT //

	// Do nothing if the driver is starting halt state.
	// This might happen when timer already been fired before cancel timer with mlmehalt
	if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_HALT_IN_PROGRESS |
								fRTMP_ADAPTER_RADIO_OFF |
								fRTMP_ADAPTER_RADIO_MEASUREMENT |
								fRTMP_ADAPTER_RESET_IN_PROGRESS))))
		return;

	RTMP_MLME_PRE_SANITY_CHECK(pAd);

#ifdef RALINK_ATE
	/* Do not show RSSI until "Normal 1 second Mlme PeriodicExec". */
	if (ATE_ON(pAd))
	{
		if (pAd->Mlme.PeriodicRound % MLME_TASK_EXEC_MULTIPLE != (MLME_TASK_EXEC_MULTIPLE - 1))
	{
			pAd->Mlme.PeriodicRound ++;
			return;
		}
	}
#endif // RALINK_ATE //

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		// Do nothing if monitor mode is on
		if (MONITOR_ON(pAd))
			return;

		if (pAd->Mlme.PeriodicRound & 0x1)
		{
			// This is the fix for wifi 11n extension channel overlapping test case.  for 2860D
			if (((pAd->MACVersion & 0xffff) == 0x0101) &&
				(STA_TGN_WIFI_ON(pAd)) &&
				(pAd->CommonCfg.IOTestParm.bToggle == FALSE))

				{
					RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x24Bf);
					pAd->CommonCfg.IOTestParm.bToggle = TRUE;
				}
				else if ((STA_TGN_WIFI_ON(pAd)) &&
						((pAd->MACVersion & 0xffff) == 0x0101))
				{
					RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x243f);
					pAd->CommonCfg.IOTestParm.bToggle = FALSE;
				}
		}
	}
#endif // CONFIG_STA_SUPPORT //

	pAd->bUpdateBcnCntDone = FALSE;

//	RECBATimerTimeout(SystemSpecific1,FunctionContext,SystemSpecific2,SystemSpecific3);
	pAd->Mlme.PeriodicRound ++;


	// execute every 500ms
	if ((pAd->Mlme.PeriodicRound % 5 == 0) && RTMPAutoRateSwitchCheck(pAd)/*(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))*/)
	{
#ifdef CONFIG_STA_SUPPORT
		// perform dynamic tx rate switching based on past TX history
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		{
			if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
					)
				&& (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)))
				MlmeDynamicTxRateSwitching(pAd);
		}
#endif // CONFIG_STA_SUPPORT //
	}

	// Normal 1 second Mlme PeriodicExec.
	if (pAd->Mlme.PeriodicRound %MLME_TASK_EXEC_MULTIPLE == 0)
	{
                pAd->Mlme.OneSecPeriodicRound ++;

#ifdef RALINK_ATE
	if (ATE_ON(pAd))
	{
			/* request from Baron : move this routine from later to here */
			/* for showing Rx error count in ATE RXFRAME */
            NICUpdateRawCounters(pAd);
			if (pAd->ate.bRxFER == 1)
			{
				pAd->ate.RxTotalCnt += pAd->ate.RxCntPerSec;
			    ate_print(KERN_EMERG "MlmePeriodicExec: Rx packet cnt = %d/%d\n", pAd->ate.RxCntPerSec, pAd->ate.RxTotalCnt);
				pAd->ate.RxCntPerSec = 0;

				if (pAd->ate.RxAntennaSel == 0)
					ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi0=%d, AvgRssi1=%d, AvgRssi2=%d\n\n",
						pAd->ate.AvgRssi0, pAd->ate.AvgRssi1, pAd->ate.AvgRssi2);
				else
					ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi=%d\n\n", pAd->ate.AvgRssi0);
			}
			MlmeResetRalinkCounters(pAd);


			return;
	}
#endif // RALINK_ATE //


		//ORIBATimerTimeout(pAd);

		// Media status changed, report to NDIS
		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE))
		{
			RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
			if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
			{
				pAd->IndicateMediaState = NdisMediaStateConnected;
				RTMP_IndicateMediaState(pAd);
			}
			else
			{
				pAd->IndicateMediaState = NdisMediaStateDisconnected;
				RTMP_IndicateMediaState(pAd);
			}
		}

		NdisGetSystemUpTime(&pAd->Mlme.Now32);

		// add the most up-to-date h/w raw counters into software variable, so that
		// the dynamic tuning mechanism below are based on most up-to-date information
		NICUpdateRawCounters(pAd);


#ifdef DOT11_N_SUPPORT
		// Need statistics after read counter. So put after NICUpdateRawCounters
		ORIBATimerTimeout(pAd);
#endif // DOT11_N_SUPPORT //

		// if MGMT RING is full more than twice within 1 second, we consider there's
		// a hardware problem stucking the TX path. In this case, try a hardware reset
		// to recover the system
	//	if (pAd->RalinkCounters.MgmtRingFullCount >= 2)
	//		RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HARDWARE_ERROR);
	//	else
	//		pAd->RalinkCounters.MgmtRingFullCount = 0;

		// The time period for checking antenna is according to traffic
#ifdef ANT_DIVERSITY_SUPPORT
		if ((pAd->NicConfig2.field.AntDiversity) &&
			(pAd->CommonCfg.bRxAntDiversity == ANT_DIVERSITY_ENABLE) &&
			(!pAd->EepromAccess))
			AsicAntennaSelect(pAd, pAd->MlmeAux.Channel);
		else if(pAd->CommonCfg.bRxAntDiversity == ANT_FIX_ANT1 || pAd->CommonCfg.bRxAntDiversity == ANT_FIX_ANT2)
		{
#ifdef CONFIG_STA_SUPPORT
			realavgrssi = (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1PrimaryRxAnt] >> 3);
#endif // CONFIG_STA_SUPPORT //
			DBGPRINT(RT_DEBUG_TRACE,("Ant-realrssi0(%d), Lastrssi0(%d), EvaluateStableCnt=%d\n", realavgrssi, pAd->RxAnt.Pair1LastAvgRssi, pAd->RxAnt.EvaluateStableCnt));
		}
		else
#endif // ANT_DIVERSITY_SUPPORT //
		{
			if (pAd->Mlme.bEnableAutoAntennaCheck)
			{
				TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
								 pAd->RalinkCounters.OneSecTxRetryOkCount +
								 pAd->RalinkCounters.OneSecTxFailCount;

				// dynamic adjust antenna evaluation period according to the traffic
				if (TxTotalCnt > 50)
				{
					if (pAd->Mlme.OneSecPeriodicRound % 10 == 0)
					{
						AsicEvaluateRxAnt(pAd);
					}
				}
				else
				{
					if (pAd->Mlme.OneSecPeriodicRound % 3 == 0)
					{
						AsicEvaluateRxAnt(pAd);
					}
				}
			}
		}

#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
			STAMlmePeriodicExec(pAd);
#endif // CONFIG_STA_SUPPORT //

		MlmeResetRalinkCounters(pAd);

#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		{
#ifdef RTMP_MAC_PCI
			if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->bPCIclkOff == FALSE))
#endif // RTMP_MAC_PCI //
			{
			// When Adhoc beacon is enabled and RTS/CTS is enabled, there is a chance that hardware MAC FSM will run into a deadlock
			// and sending CTS-to-self over and over.
			// Software Patch Solution:
			// 1. Polling debug state register 0x10F4 every one second.
			// 2. If in 0x10F4 the ((bit29==1) && (bit7==1)) OR ((bit29==1) && (bit5==1)), it means the deadlock has occurred.
			// 3. If the deadlock occurred, reset MAC/BBP by setting 0x1004 to 0x0001 for a while then setting it back to 0x000C again.

			UINT32	MacReg = 0;

			RTMP_IO_READ32(pAd, 0x10F4, &MacReg);
			if (((MacReg & 0x20000000) && (MacReg & 0x80)) || ((MacReg & 0x20000000) && (MacReg & 0x20)))
			{
				RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x1);
				RTMPusecDelay(1);
				RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0xC);

				DBGPRINT(RT_DEBUG_WARN,("Warning, MAC specific condition occurs \n"));
			}
		}
		}
#endif // CONFIG_STA_SUPPORT //

		RTMP_MLME_HANDLER(pAd);
	}


	pAd->bUpdateBcnCntDone = FALSE;
}


/*
	==========================================================================
	Validate SSID for connection try and rescan purpose
	Valid SSID will have visible chars only.
	The valid length is from 0 to 32.
	IRQL = DISPATCH_LEVEL
	==========================================================================
 */
BOOLEAN MlmeValidateSSID(
	IN PUCHAR	pSsid,
	IN UCHAR	SsidLen)
{
	int	index;

	if (SsidLen > MAX_LEN_OF_SSID)
		return (FALSE);

	// Check each character value
	for (index = 0; index < SsidLen; index++)
	{
		if (pSsid[index] < 0x20)
			return (FALSE);
	}

	// All checked
	return (TRUE);
}

VOID MlmeSelectTxRateTable(
	IN PRTMP_ADAPTER		pAd,
	IN PMAC_TABLE_ENTRY		pEntry,
	IN PUCHAR				*ppTable,
	IN PUCHAR				pTableSize,
	IN PUCHAR				pInitTxRateIdx)
{
	do
	{
		// decide the rate table for tuning
		if (pAd->CommonCfg.TxRateTableSize > 0)
		{
			*ppTable = RateSwitchTable;
			*pTableSize = RateSwitchTable[0];
			*pInitTxRateIdx = RateSwitchTable[1];

			break;
		}

#ifdef CONFIG_STA_SUPPORT
		if ((pAd->OpMode == OPMODE_STA) && ADHOC_ON(pAd))
		{
#ifdef DOT11_N_SUPPORT
			if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) &&
				(pEntry->HTCapability.MCSSet[0] == 0xff) &&
				((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
			{// 11N 1S Adhoc
				*ppTable = RateSwitchTable11N1S;
				*pTableSize = RateSwitchTable11N1S[0];
				*pInitTxRateIdx = RateSwitchTable11N1S[1];

			}
			else if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) &&
					(pEntry->HTCapability.MCSSet[0] == 0xff) &&
					(pEntry->HTCapability.MCSSet[1] == 0xff) &&
					(pAd->Antenna.field.TxPath == 2))
			{// 11N 2S Adhoc
				if (pAd->LatchRfRegs.Channel <= 14)
				{
					*ppTable = RateSwitchTable11N2S;
					*pTableSize = RateSwitchTable11N2S[0];
					*pInitTxRateIdx = RateSwitchTable11N2S[1];
				}
				else
				{
					*ppTable = RateSwitchTable11N2SForABand;
					*pTableSize = RateSwitchTable11N2SForABand[0];
					*pInitTxRateIdx = RateSwitchTable11N2SForABand[1];
				}

			}
			else
#endif // DOT11_N_SUPPORT //
				if ((pEntry->RateLen == 4)
#ifdef DOT11_N_SUPPORT
					&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
#endif // DOT11_N_SUPPORT //
					)
			{
				*ppTable = RateSwitchTable11B;
				*pTableSize = RateSwitchTable11B[0];
				*pInitTxRateIdx = RateSwitchTable11B[1];

			}
			else if (pAd->LatchRfRegs.Channel <= 14)
			{
				*ppTable = RateSwitchTable11BG;
				*pTableSize = RateSwitchTable11BG[0];
				*pInitTxRateIdx = RateSwitchTable11BG[1];

			}
			else
			{
				*ppTable = RateSwitchTable11G;
				*pTableSize = RateSwitchTable11G[0];
				*pInitTxRateIdx = RateSwitchTable11G[1];

			}
			break;
		}
#endif // CONFIG_STA_SUPPORT //

#ifdef DOT11_N_SUPPORT
		//if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
		//	((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
		if (((pEntry->RateLen == 12) || (pAd->OpMode == OPMODE_STA)) && (pEntry->HTCapability.MCSSet[0] == 0xff) &&
			((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1)))
		{// 11BGN 1S AP
			*ppTable = RateSwitchTable11BGN1S;
			*pTableSize = RateSwitchTable11BGN1S[0];
			*pInitTxRateIdx = RateSwitchTable11BGN1S[1];

			break;
		}

		//else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
		//	(pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2))
		if (((pEntry->RateLen == 12) || (pAd->OpMode == OPMODE_STA)) && (pEntry->HTCapability.MCSSet[0] == 0xff) &&
			(pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2))
		{// 11BGN 2S AP
			if (pAd->LatchRfRegs.Channel <= 14)
			{
				*ppTable = RateSwitchTable11BGN2S;
				*pTableSize = RateSwitchTable11BGN2S[0];
				*pInitTxRateIdx = RateSwitchTable11BGN2S[1];

			}
			else
			{
				*ppTable = RateSwitchTable11BGN2SForABand;
				*pTableSize = RateSwitchTable11BGN2SForABand[0];
				*pInitTxRateIdx = RateSwitchTable11BGN2SForABand[1];

			}
			break;
		}

		//else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
		if ((pEntry->HTCapability.MCSSet[0] == 0xff) && ((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->CommonCfg.TxStream == 1)))
		{// 11N 1S AP
			*ppTable = RateSwitchTable11N1S;
			*pTableSize = RateSwitchTable11N1S[0];
			*pInitTxRateIdx = RateSwitchTable11N1S[1];

			break;
		}

		//else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0xff) && (pAd->Antenna.field.TxPath == 2))
		if ((pEntry->HTCapability.MCSSet[0] == 0xff) && (pEntry->HTCapability.MCSSet[1] == 0xff) && (pAd->CommonCfg.TxStream == 2))
		{// 11N 2S AP
			if (pAd->LatchRfRegs.Channel <= 14)
			{
			*ppTable = RateSwitchTable11N2S;
			*pTableSize = RateSwitchTable11N2S[0];
			*pInitTxRateIdx = RateSwitchTable11N2S[1];
			}
			else
			{
				*ppTable = RateSwitchTable11N2SForABand;
				*pTableSize = RateSwitchTable11N2SForABand[0];
				*pInitTxRateIdx = RateSwitchTable11N2SForABand[1];
			}

			break;
		}
#endif // DOT11_N_SUPPORT //
		//else if ((pAd->StaActive.SupRateLen == 4) && (pAd->StaActive.ExtRateLen == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
		if ((pEntry->RateLen == 4 || pAd->CommonCfg.PhyMode==PHY_11B)
#ifdef DOT11_N_SUPPORT
		//Iverson mark for Adhoc b mode,sta will use rate 54  Mbps when connect with sta b/g/n mode
		/* && (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)*/
#endif // DOT11_N_SUPPORT //
			)
		{// B only AP
			*ppTable = RateSwitchTable11B;
			*pTableSize = RateSwitchTable11B[0];
			*pInitTxRateIdx = RateSwitchTable11B[1];

			break;
		}

		//else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen > 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
		if ((pEntry->RateLen > 8)
#ifdef DOT11_N_SUPPORT
			&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
#endif // DOT11_N_SUPPORT //
			)
		{// B/G  mixed AP
			*ppTable = RateSwitchTable11BG;
			*pTableSize = RateSwitchTable11BG[0];
			*pInitTxRateIdx = RateSwitchTable11BG[1];

			break;
		}

		//else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
		if ((pEntry->RateLen == 8)
#ifdef DOT11_N_SUPPORT
			&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
#endif // DOT11_N_SUPPORT //
			)
		{// G only AP
			*ppTable = RateSwitchTable11G;
			*pTableSize = RateSwitchTable11G[0];
			*pInitTxRateIdx = RateSwitchTable11G[1];

			break;
		}
#ifdef DOT11_N_SUPPORT
#endif // DOT11_N_SUPPORT //

#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		{
#ifdef DOT11_N_SUPPORT
			//else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
			if ((pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0))
#endif // DOT11_N_SUPPORT //
			{	// Legacy mode
				if (pAd->CommonCfg.MaxTxRate <= RATE_11)
				{
					*ppTable = RateSwitchTable11B;
					*pTableSize = RateSwitchTable11B[0];
					*pInitTxRateIdx = RateSwitchTable11B[1];
				}
				else if ((pAd->CommonCfg.MaxTxRate > RATE_11) && (pAd->CommonCfg.MinTxRate > RATE_11))
				{
					*ppTable = RateSwitchTable11G;
					*pTableSize = RateSwitchTable11G[0];
					*pInitTxRateIdx = RateSwitchTable11G[1];

				}
				else
				{
					*ppTable = RateSwitchTable11BG;
					*pTableSize = RateSwitchTable11BG[0];
					*pInitTxRateIdx = RateSwitchTable11BG[1];
				}
				break;
			}
#ifdef DOT11_N_SUPPORT
			if (pAd->LatchRfRegs.Channel <= 14)
			{
				if (pAd->CommonCfg.TxStream == 1)
				{
					*ppTable = RateSwitchTable11N1S;
					*pTableSize = RateSwitchTable11N1S[0];
					*pInitTxRateIdx = RateSwitchTable11N1S[1];
					DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 1S AP \n"));
				}
				else
				{
					*ppTable = RateSwitchTable11N2S;
					*pTableSize = RateSwitchTable11N2S[0];
					*pInitTxRateIdx = RateSwitchTable11N2S[1];
					DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 2S AP \n"));
				}
			}
			else
			{
				if (pAd->CommonCfg.TxStream == 1)
				{
					*ppTable = RateSwitchTable11N1S;
					*pTableSize = RateSwitchTable11N1S[0];
					*pInitTxRateIdx = RateSwitchTable11N1S[1];
					DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 1S AP \n"));
				}
				else
				{
					*ppTable = RateSwitchTable11N2SForABand;
					*pTableSize = RateSwitchTable11N2SForABand[0];
					*pInitTxRateIdx = RateSwitchTable11N2SForABand[1];
					DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 2S AP \n"));
				}
			}
#endif // DOT11_N_SUPPORT //
			DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n",
				pAd->StaActive.SupRateLen, pAd->StaActive.ExtRateLen, pAd->StaActive.SupportedPhyInfo.MCSSet[0], pAd->StaActive.SupportedPhyInfo.MCSSet[1]));
		}
#endif // CONFIG_STA_SUPPORT //
	} while(FALSE);
}


#ifdef CONFIG_STA_SUPPORT
VOID STAMlmePeriodicExec(
	PRTMP_ADAPTER pAd)
{
	ULONG			    TxTotalCnt;
	int	i;


	/*
		We return here in ATE mode, because the statistics
		that ATE need are not collected via this routine.
	*/
#ifdef RALINK_ATE
	if (ATE_ON(pAd))
	return;
#endif // RALINK_ATE //

#ifdef RALINK_ATE
	// It is supposed that we will never reach here in ATE mode.
	ASSERT(!(ATE_ON(pAd)));
	if (ATE_ON(pAd))
		return;
#endif // RALINK_ATE //

#ifdef PCIE_PS_SUPPORT
// don't perform idle-power-save mechanism within 3 min after driver initialization.
// This can make rebooter test more robust
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_PCIE_DEVICE))
	{
	if ((pAd->OpMode == OPMODE_STA) && (IDLE_ON(pAd))
		&& (pAd->Mlme.SyncMachine.CurrState == SYNC_IDLE)
		&& (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)
		&& (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)))
		{
		if (IS_RT3090(pAd)|| IS_RT3572(pAd) || IS_RT3390(pAd))
			{
			if (pAd->StaCfg.PSControl.field.EnableNewPS == TRUE)
				{
				DBGPRINT(RT_DEBUG_TRACE, ("%s::%d\n",__FUNCTION__,__LINE__));

				RT28xxPciAsicRadioOff(pAd, GUI_IDLE_POWER_SAVE, 0);
				}
			else
				{
				DBGPRINT(RT_DEBUG_TRACE, ("%s::%d\n",__FUNCTION__,__LINE__));
				AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x2);
				// Wait command success
				AsicCheckCommanOk(pAd, PowerSafeCID);
				RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF);
				DBGPRINT(RT_DEBUG_TRACE, ("PSM - rt30xx Issue Sleep command)\n"));
				}
			}
		else if (pAd->Mlme.OneSecPeriodicRound > 180)
			{
			if (pAd->StaCfg.PSControl.field.EnableNewPS == TRUE)
				{
				DBGPRINT(RT_DEBUG_TRACE, ("%s::%d\n",__FUNCTION__,__LINE__));
				RT28xxPciAsicRadioOff(pAd, GUI_IDLE_POWER_SAVE, 0);
				}
			else
				{
				DBGPRINT(RT_DEBUG_TRACE, ("%s::%d\n",__FUNCTION__,__LINE__));
				AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x02);
				// Wait command success
				AsicCheckCommanOk(pAd, PowerSafeCID);
				RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF);
				DBGPRINT(RT_DEBUG_TRACE, ("PSM -  rt28xx Issue Sleep command)\n"));
				}
			}
		}
	else
		{
		DBGPRINT(RT_DEBUG_TRACE,("STAMlmePeriodicExec MMCHK - CommonCfg.Ssid[%d]=%c%c%c%c... MlmeAux.Ssid[%d]=%c%c%c%c...\n",
			pAd->CommonCfg.SsidLen, pAd->CommonCfg.Ssid[0], pAd->CommonCfg.Ssid[1], pAd->CommonCfg.Ssid[2], pAd->CommonCfg.Ssid[3],
			pAd->MlmeAux.SsidLen, pAd->MlmeAux.Ssid[0], pAd->MlmeAux.Ssid[1], pAd->MlmeAux.Ssid[2], pAd->MlmeAux.Ssid[3]));
		}
	}
#endif // PCIE_PS_SUPPORT //


#ifdef WPA_SUPPLICANT_SUPPORT
    if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)
#endif // WPA_SUPPLICANT_SUPPORT //
    {
	// WPA MIC error should block association attempt for 60 seconds
		if (pAd->StaCfg.bBlockAssoc &&
			RTMP_TIME_AFTER(pAd->Mlme.Now32, pAd->StaCfg.LastMicErrorTime + (60*OS_HZ)))
		pAd->StaCfg.bBlockAssoc = FALSE;
    }

    if ((pAd->PreMediaState != pAd->IndicateMediaState) && (pAd->CommonCfg.bWirelessEvent))
	{
		if (pAd->IndicateMediaState == NdisMediaStateConnected)
		{
			RTMPSendWirelessEvent(pAd, IW_STA_LINKUP_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
		}
		pAd->PreMediaState = pAd->IndicateMediaState;
	}


	if (pAd->CommonCfg.PSPXlink && ADHOC_ON(pAd))
	{
	}
	else
	{
	AsicStaBbpTuning(pAd);
	}

	TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
					 pAd->RalinkCounters.OneSecTxRetryOkCount +
					 pAd->RalinkCounters.OneSecTxFailCount;

	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
	{
		// update channel quality for Roaming and UI LinkQuality display
		MlmeCalculateChannelQuality(pAd, NULL, pAd->Mlme.Now32);
	}

	// must be AFTER MlmeDynamicTxRateSwitching() because it needs to know if
	// Radio is currently in noisy environment
	if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
	AsicAdjustTxPower(pAd);

	if (INFRA_ON(pAd))
	{
#ifdef QOS_DLS_SUPPORT
		// Check DLS time out, then tear down those session
		RTMPCheckDLSTimeOut(pAd);
#endif // QOS_DLS_SUPPORT //

		// Is PSM bit consistent with user power management policy?
		// This is the only place that will set PSM bit ON.
		if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
		MlmeCheckPsmChange(pAd, pAd->Mlme.Now32);

		pAd->RalinkCounters.LastOneSecTotalTxCount = TxTotalCnt;

		if ((RTMP_TIME_AFTER(pAd->Mlme.Now32, pAd->StaCfg.LastBeaconRxTime + (1*OS_HZ))) &&
			(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) &&
			(((TxTotalCnt + pAd->RalinkCounters.OneSecRxOkCnt) < 600)))
		{
			RTMPSetAGCInitValue(pAd, BW_20);
			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - No BEACON. restore R66 to the low bound(%d) \n", (0x2E + GET_LNA_GAIN(pAd))));
		}

        //if ((pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) &&
        //    (pAd->RalinkCounters.OneSecTxRetryOkCount == 0))
        {
		if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable)
		{
		    // When APSD is enabled, the period changes as 20 sec
			if ((pAd->Mlme.OneSecPeriodicRound % 20) == 8)
				RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
		}
		else
		{
		    // Send out a NULL frame every 10 sec to inform AP that STA is still alive (Avoid being age out)
			if ((pAd->Mlme.OneSecPeriodicRound % 10) == 8)
                {
                    if (pAd->CommonCfg.bWmmCapable)
					RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
                    else
						RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, FALSE);
                }
		}
        }

		if (CQI_IS_DEAD(pAd->Mlme.ChannelQuality))
			{
			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - No BEACON. Dead CQI. Auto Recovery attempt #%ld\n", pAd->RalinkCounters.BadCQIAutoRecoveryCount));

			// Lost AP, send disconnect & link down event
			LinkDown(pAd, FALSE);

#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
		//send disassociate event to wpa_supplicant
		if (pAd->StaCfg.WpaSupplicantUP) {
			RtmpOSWrielessEventSend(pAd, IWEVCUSTOM, RT_DISASSOC_EVENT_FLAG, NULL, NULL, 0);
		}
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
#endif // WPA_SUPPLICANT_SUPPORT //

#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
		RtmpOSWrielessEventSend(pAd, SIOCGIWAP, -1, NULL, NULL, 0);
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //

			// RTMPPatchMacBbpBug(pAd);
			MlmeAutoReconnectLastSSID(pAd);
		}
		else if (CQI_IS_BAD(pAd->Mlme.ChannelQuality))
		{
			pAd->RalinkCounters.BadCQIAutoRecoveryCount ++;
			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Bad CQI. Auto Recovery attempt #%ld\n", pAd->RalinkCounters.BadCQIAutoRecoveryCount));
			MlmeAutoReconnectLastSSID(pAd);
		}

		if (pAd->StaCfg.bAutoRoaming)
		{
			BOOLEAN	rv = FALSE;
			CHAR	dBmToRoam = pAd->StaCfg.dBmToRoam;
			CHAR	MaxRssi = RTMPMaxRssi(pAd,
										  pAd->StaCfg.RssiSample.LastRssi0,
										  pAd->StaCfg.RssiSample.LastRssi1,
										  pAd->StaCfg.RssiSample.LastRssi2);

			// Scanning, ignore Roaming
			if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS) &&
				(pAd->Mlme.SyncMachine.CurrState == SYNC_IDLE) &&
				(MaxRssi <= dBmToRoam))
			{
				DBGPRINT(RT_DEBUG_TRACE, ("Rssi=%d, dBmToRoam=%d\n", MaxRssi, (CHAR)dBmToRoam));


				// Add auto seamless roaming
				if (rv == FALSE)
					rv = MlmeCheckForFastRoaming(pAd);

				if (rv == FALSE)
				{
					if ((pAd->StaCfg.LastScanTime + 10 * OS_HZ) < pAd->Mlme.Now32)
					{
						DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Roaming, No eligable entry, try new scan!\n"));
						pAd->StaCfg.ScanCnt = 2;
						pAd->StaCfg.LastScanTime = pAd->Mlme.Now32;
						MlmeAutoScan(pAd);
					}
				}
			}
		}
	}
	else if (ADHOC_ON(pAd))
	{

		// If all peers leave, and this STA becomes the last one in this IBSS, then change MediaState
		// to DISCONNECTED. But still holding this IBSS (i.e. sending BEACON) so that other STAs can
		// join later.
		if (RTMP_TIME_AFTER(pAd->Mlme.Now32, pAd->StaCfg.LastBeaconRxTime + ADHOC_BEACON_LOST_TIME) &&
			OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
		{
			MLME_START_REQ_STRUCT     StartReq;

			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - excessive BEACON lost, last STA in this IBSS, MediaState=Disconnected\n"));
			LinkDown(pAd, FALSE);

			StartParmFill(pAd, &StartReq, (CHAR *)pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
			MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_START_REQ, sizeof(MLME_START_REQ_STRUCT), &StartReq);
			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START;
		}

		for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++)
		{
			MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[i];

			if (pEntry->ValidAsCLI == FALSE)
				continue;

			if (RTMP_TIME_AFTER(pAd->Mlme.Now32, pEntry->LastBeaconRxTime + ADHOC_BEACON_LOST_TIME))
				MacTableDeleteEntry(pAd, pEntry->Aid, pEntry->Addr);
		}
	}
	else // no INFRA nor ADHOC connection
	{

		if (pAd->StaCfg.bScanReqIsFromWebUI &&
			RTMP_TIME_BEFORE(pAd->Mlme.Now32, pAd->StaCfg.LastScanTime + (30 * OS_HZ)))
			goto SKIP_AUTO_SCAN_CONN;
        else
            pAd->StaCfg.bScanReqIsFromWebUI = FALSE;

		if ((pAd->StaCfg.bAutoReconnect == TRUE)
			&& RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP)
			&& (MlmeValidateSSID(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen) == TRUE))
		{
			if ((pAd->ScanTab.BssNr==0) && (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE))
			{
				MLME_SCAN_REQ_STRUCT	   ScanReq;

				if (RTMP_TIME_AFTER(pAd->Mlme.Now32, pAd->StaCfg.LastScanTime + (10 * OS_HZ)))
				{
					DBGPRINT(RT_DEBUG_TRACE, ("STAMlmePeriodicExec():CNTL - ScanTab.BssNr==0, start a new ACTIVE scan SSID[%s]\n", pAd->MlmeAux.AutoReconnectSsid));
					ScanParmFill(pAd, &ScanReq, (PSTRING) pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen, BSS_ANY, SCAN_ACTIVE);
					MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ, sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
					pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
					// Reset Missed scan number
					pAd->StaCfg.LastScanTime = pAd->Mlme.Now32;
				}
				else if (pAd->StaCfg.BssType == BSS_ADHOC)	// Quit the forever scan when in a very clean room
					MlmeAutoReconnectLastSSID(pAd);
			}
			else if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)
			{
				if ((pAd->Mlme.OneSecPeriodicRound % 7) == 0)
					{
						MlmeAutoScan(pAd);
						pAd->StaCfg.LastScanTime = pAd->Mlme.Now32;
					}
				else
				{
#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
					if (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
					{
						if ((pAd->Mlme.OneSecPeriodicRound % 5) == 1)
							MlmeAutoReconnectLastSSID(pAd);
					}
					else
#endif // CARRIER_DETECTION_SUPPORT //
						MlmeAutoReconnectLastSSID(pAd);
				}
			}
		}
	}

SKIP_AUTO_SCAN_CONN:

#ifdef DOT11_N_SUPPORT
    if ((pAd->MacTab.Content[BSSID_WCID].TXBAbitmap !=0) && (pAd->MacTab.fAnyBASession == FALSE))
	{
		pAd->MacTab.fAnyBASession = TRUE;
		AsicUpdateProtect(pAd, HT_FORCERTSCTS,  ALLN_SETPROTECT, FALSE, FALSE);
	}
	else if ((pAd->MacTab.Content[BSSID_WCID].TXBAbitmap ==0) && (pAd->MacTab.fAnyBASession == TRUE))
	{
		pAd->MacTab.fAnyBASession = FALSE;
		AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode,  ALLN_SETPROTECT, FALSE, FALSE);
	}
#endif // DOT11_N_SUPPORT //


#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_SCAN_2040))
		TriEventCounterMaintenance(pAd);
#endif // DOT11N_DRAFT3 //
#endif // DOT11_N_SUPPORT //

	return;
}

// Link down report
VOID LinkDownExec(
	IN PVOID SystemSpecific1,
	IN PVOID FunctionContext,
	IN PVOID SystemSpecific2,
	IN PVOID SystemSpecific3)
{
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;

	if (pAd != NULL)
	{
		MLME_DISASSOC_REQ_STRUCT   DisassocReq;

		if ((pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED) &&
			(INFRA_ON(pAd)))
		{
			DBGPRINT(RT_DEBUG_TRACE, ("LinkDownExec(): disassociate with current AP...\n"));
			DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
			MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
						sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;

			pAd->IndicateMediaState = NdisMediaStateDisconnected;
			RTMP_IndicateMediaState(pAd);
		    pAd->ExtraInfo = GENERAL_LINK_DOWN;
		}
	}
}

// IRQL = DISPATCH_LEVEL
VOID MlmeAutoScan(
	IN PRTMP_ADAPTER pAd)
{
	// check CntlMachine.CurrState to avoid collision with NDIS SetOID request
	if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)
	{
		DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Driver auto scan\n"));
		MlmeEnqueue(pAd,
					MLME_CNTL_STATE_MACHINE,
					OID_802_11_BSSID_LIST_SCAN,
					pAd->MlmeAux.AutoReconnectSsidLen,
					pAd->MlmeAux.AutoReconnectSsid);
		RTMP_MLME_HANDLER(pAd);
	}
}

// IRQL = DISPATCH_LEVEL
VOID MlmeAutoReconnectLastSSID(
	IN PRTMP_ADAPTER pAd)
{
	if (pAd->StaCfg.bAutoConnectByBssid)
	{
		DBGPRINT(RT_DEBUG_TRACE, ("Driver auto reconnect to last OID_802_11_BSSID setting - %02X:%02X:%02X:%02X:%02X:%02X\n",
									pAd->MlmeAux.Bssid[0],
									pAd->MlmeAux.Bssid[1],
									pAd->MlmeAux.Bssid[2],
									pAd->MlmeAux.Bssid[3],
									pAd->MlmeAux.Bssid[4],
									pAd->MlmeAux.Bssid[5]));

		pAd->MlmeAux.Channel = pAd->CommonCfg.Channel;
		MlmeEnqueue(pAd,
			 MLME_CNTL_STATE_MACHINE,
			 OID_802_11_BSSID,
			 MAC_ADDR_LEN,
			 pAd->MlmeAux.Bssid);

		pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;

		RTMP_MLME_HANDLER(pAd);
	}
	// check CntlMachine.CurrState to avoid collision with NDIS SetOID request
	else if ((pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) &&
		(MlmeValidateSSID(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen) == TRUE))
	{
		NDIS_802_11_SSID OidSsid;
		OidSsid.SsidLength = pAd->MlmeAux.AutoReconnectSsidLen;
		NdisMoveMemory(OidSsid.Ssid, pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);

		DBGPRINT(RT_DEBUG_TRACE, ("Driver auto reconnect to last OID_802_11_SSID setting - %s, len - %d\n", pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen));
		MlmeEnqueue(pAd,
					MLME_CNTL_STATE_MACHINE,
					OID_802_11_SSID,
					sizeof(NDIS_802_11_SSID),
					&OidSsid);
		RTMP_MLME_HANDLER(pAd);
	}
}


/*
	==========================================================================
	Description:
		This routine checks if there're other APs out there capable for
		roaming. Caller should call this routine only when Link up in INFRA mode
		and channel quality is below CQI_GOOD_THRESHOLD.

	IRQL = DISPATCH_LEVEL

	Output:
	==========================================================================
 */
VOID MlmeCheckForRoaming(
	IN PRTMP_ADAPTER pAd,
	IN ULONG	Now32)
{
	USHORT	   i;
	BSS_TABLE  *pRoamTab = &pAd->MlmeAux.RoamTab;
	BSS_ENTRY  *pBss;

	DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeCheckForRoaming\n"));
	// put all roaming candidates into RoamTab, and sort in RSSI order
	BssTableInit(pRoamTab);
	for (i = 0; i < pAd->ScanTab.BssNr; i++)
	{
		pBss = &pAd->ScanTab.BssEntry[i];

		if ((pBss->LastBeaconRxTime + pAd->StaCfg.BeaconLostTime) < Now32)
			continue;	 // AP disappear
		if (pBss->Rssi <= RSSI_THRESHOLD_FOR_ROAMING)
			continue;	 // RSSI too weak. forget it.
		if (MAC_ADDR_EQUAL(pBss->Bssid, pAd->CommonCfg.Bssid))
			continue;	 // skip current AP
		if (pBss->Rssi < (pAd->StaCfg.RssiSample.LastRssi0 + RSSI_DELTA))
			continue;	 // only AP with stronger RSSI is eligible for roaming

		// AP passing all above rules is put into roaming candidate table
		NdisMoveMemory(&pRoamTab->BssEntry[pRoamTab->BssNr], pBss, sizeof(BSS_ENTRY));
		pRoamTab->BssNr += 1;
	}

	if (pRoamTab->BssNr > 0)
	{
		// check CntlMachine.CurrState to avoid collision with NDIS SetOID request
		if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)
		{
			pAd->RalinkCounters.PoorCQIRoamingCount ++;
			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Roaming attempt #%ld\n", pAd->RalinkCounters.PoorCQIRoamingCount));
			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_MLME_ROAMING_REQ, 0, NULL);
			RTMP_MLME_HANDLER(pAd);
		}
	}
	DBGPRINT(RT_DEBUG_TRACE, ("<== MlmeCheckForRoaming(# of candidate= %d)\n",pRoamTab->BssNr));
}

/*
	==========================================================================
	Description:
		This routine checks if there're other APs out there capable for
		roaming. Caller should call this routine only when link up in INFRA mode
		and channel quality is below CQI_GOOD_THRESHOLD.

	IRQL = DISPATCH_LEVEL

	Output:
	==========================================================================
 */
BOOLEAN MlmeCheckForFastRoaming(
	IN	PRTMP_ADAPTER	pAd)
{
	USHORT		i;
	BSS_TABLE	*pRoamTab = &pAd->MlmeAux.RoamTab;
	BSS_ENTRY	*pBss;

	DBGPRINT(RT_DEBUG_TRACE, ("==> MlmeCheckForFastRoaming\n"));
	// put all roaming candidates into RoamTab, and sort in RSSI order
	BssTableInit(pRoamTab);
	for (i = 0; i < pAd->ScanTab.BssNr; i++)
	{
		pBss = &pAd->ScanTab.BssEntry[i];

        if ((pBss->Rssi <= -50) && (pBss->Channel == pAd->CommonCfg.Channel))
			continue;	 // RSSI too weak. forget it.
		if (MAC_ADDR_EQUAL(pBss->Bssid, pAd->CommonCfg.Bssid))
			continue;	 // skip current AP
		if (!SSID_EQUAL(pBss->Ssid, pBss->SsidLen, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen))
			continue;	 // skip different SSID
        if (pBss->Rssi < (RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2) + RSSI_DELTA))
			continue;	 // skip AP without better RSSI

        DBGPRINT(RT_DEBUG_TRACE, ("LastRssi0 = %d, pBss->Rssi = %d\n", RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2), pBss->Rssi));
		// AP passing all above rules is put into roaming candidate table
		NdisMoveMemory(&pRoamTab->BssEntry[pRoamTab->BssNr], pBss, sizeof(BSS_ENTRY));
		pRoamTab->BssNr += 1;
	}

	DBGPRINT(RT_DEBUG_TRACE, ("<== MlmeCheckForFastRoaming (BssNr=%d)\n", pRoamTab->BssNr));
	if (pRoamTab->BssNr > 0)
	{
		// check CntlMachine.CurrState to avoid collision with NDIS SetOID request
		if (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)
		{
			pAd->RalinkCounters.PoorCQIRoamingCount ++;
			DBGPRINT(RT_DEBUG_TRACE, ("MMCHK - Roaming attempt #%ld\n", pAd->RalinkCounters.PoorCQIRoamingCount));
			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_MLME_ROAMING_REQ, 0, NULL);
			RTMP_MLME_HANDLER(pAd);
			return TRUE;
		}
	}

	return FALSE;
}

VOID MlmeSetTxRate(
	IN PRTMP_ADAPTER		pAd,
	IN PMAC_TABLE_ENTRY		pEntry,
	IN PRTMP_TX_RATE_SWITCH	pTxRate)
{
	UCHAR	MaxMode = MODE_OFDM;

#ifdef DOT11_N_SUPPORT
	MaxMode = MODE_HTGREENFIELD;

	if (pTxRate->STBC && (pAd->StaCfg.MaxHTPhyMode.field.STBC) && (pAd->Antenna.field.TxPath == 2))
		pAd->StaCfg.HTPhyMode.field.STBC = STBC_USE;
	else
#endif // DOT11_N_SUPPORT //
		pAd->StaCfg.HTPhyMode.field.STBC = STBC_NONE;

	if (pTxRate->CurrMCS < MCS_AUTO)
		pAd->StaCfg.HTPhyMode.field.MCS = pTxRate->CurrMCS;

	if (pAd->StaCfg.HTPhyMode.field.MCS > 7)
		pAd->StaCfg.HTPhyMode.field.STBC = STBC_NONE;

	if (ADHOC_ON(pAd))
	{
		// If peer adhoc is b-only mode, we can't send 11g rate.
		pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
		pEntry->HTPhyMode.field.STBC	= STBC_NONE;

		//
		// For Adhoc MODE_CCK, driver will use AdhocBOnlyJoined flag to roll back to B only if necessary
		//
		pEntry->HTPhyMode.field.MODE	= pTxRate->Mode;
		pEntry->HTPhyMode.field.ShortGI	= pAd->StaCfg.HTPhyMode.field.ShortGI;
		pEntry->HTPhyMode.field.MCS		= pAd->StaCfg.HTPhyMode.field.MCS;

		// Patch speed error in status page
		pAd->StaCfg.HTPhyMode.field.MODE = pEntry->HTPhyMode.field.MODE;
	}
	else
    {
		if (pTxRate->Mode <= MaxMode)
		pAd->StaCfg.HTPhyMode.field.MODE = pTxRate->Mode;

#ifdef DOT11_N_SUPPORT
        if (pTxRate->ShortGI && (pAd->StaCfg.MaxHTPhyMode.field.ShortGI))
			pAd->StaCfg.HTPhyMode.field.ShortGI = GI_400;
		else
#endif // DOT11_N_SUPPORT //
			pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;

#ifdef DOT11_N_SUPPORT
		// Reexam each bandwidth's SGI support.
		if (pAd->StaCfg.HTPhyMode.field.ShortGI == GI_400)
		{
			if ((pEntry->HTPhyMode.field.BW == BW_20) && (!CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE)))
				pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
			if ((pEntry->HTPhyMode.field.BW == BW_40) && (!CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE)))
				pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
		}

        // Turn RTS/CTS rate to 6Mbps.
		if ((pEntry->HTPhyMode.field.MCS == 0) && (pAd->StaCfg.HTPhyMode.field.MCS != 0))
		{
			pEntry->HTPhyMode.field.MCS		= pAd->StaCfg.HTPhyMode.field.MCS;
			if (pAd->MacTab.fAnyBASession)
			{
				AsicUpdateProtect(pAd, HT_FORCERTSCTS, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
			}
			else
			{
				AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
			}
		}
		else if ((pEntry->HTPhyMode.field.MCS == 8) && (pAd->StaCfg.HTPhyMode.field.MCS != 8))
		{
			pEntry->HTPhyMode.field.MCS		= pAd->StaCfg.HTPhyMode.field.MCS;
			if (pAd->MacTab.fAnyBASession)
			{
				AsicUpdateProtect(pAd, HT_FORCERTSCTS, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
			}
			else
			{
				AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
			}
		}
		else if ((pEntry->HTPhyMode.field.MCS != 0) && (pAd->StaCfg.HTPhyMode.field.MCS == 0))
		{
			AsicUpdateProtect(pAd, HT_RTSCTS_6M, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);

		}
		else if ((pEntry->HTPhyMode.field.MCS != 8) && (pAd->StaCfg.HTPhyMode.field.MCS == 8))
		{
			AsicUpdateProtect(pAd, HT_RTSCTS_6M, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
		}
#endif // DOT11_N_SUPPORT //

		pEntry->HTPhyMode.field.STBC	= pAd->StaCfg.HTPhyMode.field.STBC;
		pEntry->HTPhyMode.field.ShortGI	= pAd->StaCfg.HTPhyMode.field.ShortGI;
		pEntry->HTPhyMode.field.MCS		= pAd->StaCfg.HTPhyMode.field.MCS;
		pEntry->HTPhyMode.field.MODE	= pAd->StaCfg.HTPhyMode.field.MODE;
#ifdef DOT11_N_SUPPORT
        if ((pAd->StaCfg.MaxHTPhyMode.field.MODE == MODE_HTGREENFIELD) &&
            pAd->WIFItestbed.bGreenField)
            pEntry->HTPhyMode.field.MODE = MODE_HTGREENFIELD;
#endif // DOT11_N_SUPPORT //
    }

    pAd->LastTxRate = (USHORT)(pEntry->HTPhyMode.word);
}

/*
	==========================================================================
	Description:
		This routine calculates the acumulated TxPER of eaxh TxRate. And
		according to the calculation result, change CommonCfg.TxRate which
		is the stable TX Rate we expect the Radio situation could sustained.

		CommonCfg.TxRate will change dynamically within {RATE_1/RATE_6, MaxTxRate}
	Output:
		CommonCfg.TxRate -

	IRQL = DISPATCH_LEVEL

	NOTE:
		call this routine every second
	==========================================================================
 */
VOID MlmeDynamicTxRateSwitching(
	IN PRTMP_ADAPTER pAd)
{
	UCHAR					UpRateIdx = 0, DownRateIdx = 0, CurrRateIdx;
	ULONG					i, AccuTxTotalCnt = 0, TxTotalCnt;
	ULONG					TxErrorRatio = 0;
	BOOLEAN					bTxRateChanged = FALSE, bUpgradeQuality = FALSE;
	PRTMP_TX_RATE_SWITCH	pCurrTxRate, pNextTxRate = NULL;
	PUCHAR					pTable;
	UCHAR					TableSize = 0;
	UCHAR					InitTxRateIdx = 0, TrainUp, TrainDown;
	CHAR					Rssi, RssiOffset = 0;
	TX_STA_CNT1_STRUC		StaTx1;
	TX_STA_CNT0_STRUC		TxStaCnt0;
	ULONG					TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0;
	MAC_TABLE_ENTRY			*pEntry;
	RSSI_SAMPLE				*pRssi = &pAd->StaCfg.RssiSample;

#ifdef RALINK_ATE
	if (ATE_ON(pAd))
	{
		return;
	}
#endif // RALINK_ATE //

	//
	// walk through MAC table, see if need to change AP's TX rate toward each entry
	//
	for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++)
	{
		pEntry = &pAd->MacTab.Content[i];

	// check if this entry need to switch rate automatically
		if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pEntry) == FALSE)
			continue;

		if ((pAd->MacTab.Size == 1) || (pEntry->ValidAsDls))
		{
			Rssi = RTMPMaxRssi(pAd,
							   pRssi->AvgRssi0,
							   pRssi->AvgRssi1,
							   pRssi->AvgRssi2);

			// Update statistic counter
			RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
			RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word);
			pAd->bUpdateBcnCntDone = TRUE;
			TxRetransmit = StaTx1.field.TxRetransmit;
			TxSuccess = StaTx1.field.TxSuccess;
			TxFailCount = TxStaCnt0.field.TxFailCount;
			TxTotalCnt = TxRetransmit + TxSuccess + TxFailCount;

			pAd->RalinkCounters.OneSecTxRetryOkCount += StaTx1.field.TxRetransmit;
			pAd->RalinkCounters.OneSecTxNoRetryOkCount += StaTx1.field.TxSuccess;
			pAd->RalinkCounters.OneSecTxFailCount += TxStaCnt0.field.TxFailCount;
			pAd->WlanCounters.TransmittedFragmentCount.u.LowPart += StaTx1.field.TxSuccess;
			pAd->WlanCounters.RetryCount.u.LowPart += StaTx1.field.TxRetransmit;
			pAd->WlanCounters.FailedCount.u.LowPart += TxStaCnt0.field.TxFailCount;

			// if no traffic in the past 1-sec period, don't change TX rate,
			// but clear all bad history. because the bad history may affect the next
			// Chariot throughput test
			AccuTxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
						 pAd->RalinkCounters.OneSecTxRetryOkCount +
						 pAd->RalinkCounters.OneSecTxFailCount;

			if (TxTotalCnt)
				TxErrorRatio = ((TxRetransmit + TxFailCount) * 100) / TxTotalCnt;
		}
		else
		{
			if (INFRA_ON(pAd) && (i == 1))
				Rssi = RTMPMaxRssi(pAd,
								   pRssi->AvgRssi0,
								   pRssi->AvgRssi1,
								   pRssi->AvgRssi2);
			else
				Rssi = RTMPMaxRssi(pAd,
								   pEntry->RssiSample.AvgRssi0,
								   pEntry->RssiSample.AvgRssi1,
								   pEntry->RssiSample.AvgRssi2);

			TxTotalCnt = pEntry->OneSecTxNoRetryOkCount +
				 pEntry->OneSecTxRetryOkCount +
				 pEntry->OneSecTxFailCount;

			if (TxTotalCnt)
				TxErrorRatio = ((pEntry->OneSecTxRetryOkCount + pEntry->OneSecTxFailCount) * 100) / TxTotalCnt;
		}

		if (TxTotalCnt)
		{
			/*
				Three AdHoc connections can not work normally if one AdHoc connection is disappeared from a heavy traffic environment generated by ping tool
				We force to set LongRtyLimit and ShortRtyLimit to 0 to stop retransmitting packet, after a while, resoring original settings
			*/
			if (TxErrorRatio == 100)
			{
				TX_RTY_CFG_STRUC	TxRtyCfg,TxRtyCfgtmp;
				ULONG	Index;
				ULONG	MACValue;

				RTMP_IO_READ32(pAd, TX_RTY_CFG, &TxRtyCfg.word);
				TxRtyCfgtmp.word = TxRtyCfg.word;
				TxRtyCfg.field.LongRtyLimit = 0x0;
				TxRtyCfg.field.ShortRtyLimit = 0x0;
				RTMP_IO_WRITE32(pAd, TX_RTY_CFG, TxRtyCfg.word);

				RTMPusecDelay(1);

				Index = 0;
				MACValue = 0;
				do
				{
					RTMP_IO_READ32(pAd, TXRXQ_PCNT, &MACValue);
					if ((MACValue & 0xffffff) == 0)
						break;
					Index++;
					RTMPusecDelay(1000);
				}while((Index < 330)&&(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)));

				RTMP_IO_READ32(pAd, TX_RTY_CFG, &TxRtyCfg.word);
				TxRtyCfg.field.LongRtyLimit = TxRtyCfgtmp.field.LongRtyLimit;
				TxRtyCfg.field.ShortRtyLimit = TxRtyCfgtmp.field.ShortRtyLimit;
				RTMP_IO_WRITE32(pAd, TX_RTY_CFG, TxRtyCfg.word);
			}
		}

		CurrRateIdx = pEntry->CurrTxRateIndex;

		MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &InitTxRateIdx);

		if (CurrRateIdx >= TableSize)
		{
			CurrRateIdx = TableSize - 1;
		}

		// When switch from Fixed rate -> auto rate, the REAL TX rate might be different from pAd->CommonCfg.TxRateIndex.
		// So need to sync here.
		pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5];
		if ((pEntry->HTPhyMode.field.MCS != pCurrTxRate->CurrMCS)
			//&& (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
			)
		{

			// Need to sync Real Tx rate and our record.
			// Then return for next DRS.
			pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(InitTxRateIdx+1)*5];
			pEntry->CurrTxRateIndex = InitTxRateIdx;
			MlmeSetTxRate(pAd, pEntry, pCurrTxRate);

			// reset all OneSecTx counters
			RESET_ONE_SEC_TX_CNT(pEntry);
			continue;
		}

		// decide the next upgrade rate and downgrade rate, if any
		if ((CurrRateIdx > 0) && (CurrRateIdx < (TableSize - 1)))
		{
			UpRateIdx = CurrRateIdx + 1;
			DownRateIdx = CurrRateIdx -1;
		}
		else if (CurrRateIdx == 0)
		{
			UpRateIdx = CurrRateIdx + 1;
			DownRateIdx = CurrRateIdx;
		}
		else if (CurrRateIdx == (TableSize - 1))
		{
			UpRateIdx = CurrRateIdx;
			DownRateIdx = CurrRateIdx - 1;
		}

		pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5];

#ifdef DOT11_N_SUPPORT
		if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX))
		{
			TrainUp		= (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1));
			TrainDown	= (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1));
		}
		else
#endif // DOT11_N_SUPPORT //
		{
			TrainUp		= pCurrTxRate->TrainUp;
			TrainDown	= pCurrTxRate->TrainDown;
		}

		//pAd->DrsCounters.LastTimeTxRateChangeAction = pAd->DrsCounters.LastSecTxRateChangeAction;

		//
		// Keep the last time TxRateChangeAction status.
		//
		pEntry->LastTimeTxRateChangeAction = pEntry->LastSecTxRateChangeAction;


		//
		// CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI
		//         (criteria copied from RT2500 for Netopia case)
		//
		if (TxTotalCnt <= 15)
		{
			CHAR	idx = 0;
			UCHAR	TxRateIdx;
			UCHAR	MCS0 = 0, MCS1 = 0, MCS2 = 0, MCS3 = 0, MCS4 = 0,  MCS5 =0, MCS6 = 0, MCS7 = 0;
	        UCHAR	MCS12 = 0, MCS13 = 0, MCS14 = 0, MCS15 = 0;
			UCHAR	MCS20 = 0, MCS21 = 0, MCS22 = 0, MCS23 = 0; // 3*3

			// check the existence and index of each needed MCS
			while (idx < pTable[0])
			{
				pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(idx+1)*5];

				if (pCurrTxRate->CurrMCS == MCS_0)
				{
					MCS0 = idx;
				}
				else if (pCurrTxRate->CurrMCS == MCS_1)
				{
					MCS1 = idx;
				}
				else if (pCurrTxRate->CurrMCS == MCS_2)
				{
					MCS2 = idx;
				}
				else if (pCurrTxRate->CurrMCS == MCS_3)
				{
					MCS3 = idx;
				}
				else if (pCurrTxRate->CurrMCS == MCS_4)
				{
					MCS4 = idx;
				}
	            else if (pCurrTxRate->CurrMCS == MCS_5)
	            {
	                MCS5 = idx;
	            }
	            else if (pCurrTxRate->CurrMCS == MCS_6)
	            {
	                MCS6 = idx;
	            }
				//else if (pCurrTxRate->CurrMCS == MCS_7)
				else if ((pCurrTxRate->CurrMCS == MCS_7) && (pCurrTxRate->ShortGI == GI_800))	// prevent the highest MCS using short GI when 1T and low throughput
				{
					MCS7 = idx;
				}
				else if (pCurrTxRate->CurrMCS == MCS_12)
				{
					MCS12 = idx;
				}
				else if (pCurrTxRate->CurrMCS == MCS_13)
				{
					MCS13 = idx;
				}
				else if (pCurrTxRate->CurrMCS == MCS_14)
				{
					MCS14 = idx;
				}
				//else if ((pCurrTxRate->CurrMCS == MCS_15)/* && (pCurrTxRate->ShortGI == GI_800)*/)	//we hope to use ShortGI as initial rate
				else if ((pCurrTxRate->CurrMCS == MCS_15) && (pCurrTxRate->ShortGI == GI_800))	//we hope to use ShortGI as initial rate, however Atheros's chip has bugs when short GI
				{
					MCS15 = idx;
				}
				else if (pCurrTxRate->CurrMCS == MCS_20) // 3*3
				{
					MCS20 = idx;
				}
				else if (pCurrTxRate->CurrMCS == MCS_21)
				{
					MCS21 = idx;
				}
				else if (pCurrTxRate->CurrMCS == MCS_22)
				{
					MCS22 = idx;
				}
				else if (pCurrTxRate->CurrMCS == MCS_23)
				{
					MCS23 = idx;
				}
				idx ++;
			}

			if (pAd->LatchRfRegs.Channel <= 14)
			{
				if (pAd->NicConfig2.field.ExternalLNAForG)
				{
					RssiOffset = 2;
				}
				else
				{
					RssiOffset = 5;
				}
			}
			else
			{
				if (pAd->NicConfig2.field.ExternalLNAForA)
				{
					RssiOffset = 5;
				}
				else
				{
					RssiOffset = 8;
				}
			}
#ifdef DOT11_N_SUPPORT
			/*if (MCS15)*/
			if ((pTable == RateSwitchTable11BGN3S) ||
				(pTable == RateSwitchTable11N3S) ||
				(pTable == RateSwitchTable))
			{// N mode with 3 stream // 3*3
				if (MCS23 && (Rssi >= -70))
					TxRateIdx = MCS23;
				else if (MCS22 && (Rssi >= -72))
					TxRateIdx = MCS22;
		    else if (MCS21 && (Rssi >= -76))
					TxRateIdx = MCS21;
				else if (MCS20 && (Rssi >= -78))
					TxRateIdx = MCS20;
			else if (MCS4 && (Rssi >= -82))
				TxRateIdx = MCS4;
			else if (MCS3 && (Rssi >= -84))
				TxRateIdx = MCS3;
			else if (MCS2 && (Rssi >= -86))
				TxRateIdx = MCS2;
			else if (MCS1 && (Rssi >= -88))
				TxRateIdx = MCS1;
			else
				TxRateIdx = MCS0;
		}
//		else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) ||(pTable == RateSwitchTable11N2S) ||(pTable == RateSwitchTable11N2SForABand) || (pTable == RateSwitchTable))
		else if ((pTable == RateSwitchTable11BGN2S) || (pTable == RateSwitchTable11BGN2SForABand) ||(pTable == RateSwitchTable11N2S) ||(pTable == RateSwitchTable11N2SForABand)) // 3*3
			{// N mode with 2 stream
				if (MCS15 && (Rssi >= (-70+RssiOffset)))
					TxRateIdx = MCS15;
				else if (MCS14 && (Rssi >= (-72+RssiOffset)))
					TxRateIdx = MCS14;
				else if (MCS13 && (Rssi >= (-76+RssiOffset)))
					TxRateIdx = MCS13;
				else if (MCS12 && (Rssi >= (-78+RssiOffset)))
					TxRateIdx = MCS12;
				else if (MCS4 && (Rssi >= (-82+RssiOffset)))
					TxRateIdx = MCS4;
				else if (MCS3 && (Rssi >= (-84+RssiOffset)))
					TxRateIdx = MCS3;
				else if (MCS2 && (Rssi >= (-86+RssiOffset)))
					TxRateIdx = MCS2;
				else if (MCS1 && (Rssi >= (-88+RssiOffset)))
					TxRateIdx = MCS1;
				else
					TxRateIdx = MCS0;
			}
			else if ((pTable == RateSwitchTable11BGN1S) || (pTable == RateSwitchTable11N1S))
			{// N mode with 1 stream
				if (MCS7 && (Rssi > (-72+RssiOffset)))
					TxRateIdx = MCS7;
				else if (MCS6 && (Rssi > (-74+RssiOffset)))
					TxRateIdx = MCS6;
				else if (MCS5 && (Rssi > (-77+RssiOffset)))
					TxRateIdx = MCS5;
				else if (MCS4 && (Rssi > (-79+RssiOffset)))
					TxRateIdx = MCS4;
				else if (MCS3 && (Rssi > (-81+RssiOffset)))
					TxRateIdx = MCS3;
				else if (MCS2 && (Rssi > (-83+RssiOffset)))
					TxRateIdx = MCS2;
				else if (MCS1 && (Rssi > (-86+RssiOffset)))
					TxRateIdx = MCS1;
				else
					TxRateIdx = MCS0;
			}
			else
#endif // DOT11_N_SUPPORT //
			{// Legacy mode
				if (MCS7 && (Rssi > -70))
					TxRateIdx = MCS7;
				else if (MCS6 && (Rssi > -74))
					TxRateIdx = MCS6;
				else if (MCS5 && (Rssi > -78))
					TxRateIdx = MCS5;
				else if (MCS4 && (Rssi > -82))
					TxRateIdx = MCS4;
				else if (MCS4 == 0)	// for B-only mode
					TxRateIdx = MCS3;
				else if (MCS3 && (Rssi > -85))
					TxRateIdx = MCS3;
				else if (MCS2 && (Rssi > -87))
					TxRateIdx = MCS2;
				else if (MCS1 && (Rssi > -90))
					TxRateIdx = MCS1;
				else
					TxRateIdx = MCS0;
			}

	//		if (TxRateIdx != pAd->CommonCfg.TxRateIndex)
			{
				pEntry->CurrTxRateIndex = TxRateIdx;
				pNextTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(pEntry->CurrTxRateIndex+1)*5];
				MlmeSetTxRate(pAd, pEntry, pNextTxRate);
			}

			NdisZeroMemory(pEntry->TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH);
			NdisZeroMemory(pEntry->PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH);
			pEntry->fLastSecAccordingRSSI = TRUE;
			// reset all OneSecTx counters
			RESET_ONE_SEC_TX_CNT(pEntry);

			continue;
		}

		if (pEntry->fLastSecAccordingRSSI == TRUE)
		{
			pEntry->fLastSecAccordingRSSI = FALSE;
			pEntry->LastSecTxRateChangeAction = 0;
			// reset all OneSecTx counters
			RESET_ONE_SEC_TX_CNT(pEntry);

			continue;
		}

		do
		{
			BOOLEAN	bTrainUpDown = FALSE;

			pEntry->CurrTxRateStableTime ++;

			// downgrade TX quality if PER >= Rate-Down threshold
			if (TxErrorRatio >= TrainDown)
			{
				bTrainUpDown = TRUE;
				pEntry->TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND;
			}
			// upgrade TX quality if PER <= Rate-Up threshold
			else if (TxErrorRatio <= TrainUp)
			{
				bTrainUpDown = TRUE;
				bUpgradeQuality = TRUE;
				if (pEntry->TxQuality[CurrRateIdx])
					pEntry->TxQuality[CurrRateIdx] --;  // quality very good in CurrRate

				if (pEntry->TxRateUpPenalty)
					pEntry->TxRateUpPenalty --;
				else if (pEntry->TxQuality[UpRateIdx])
					pEntry->TxQuality[UpRateIdx] --;    // may improve next UP rate's quality
			}

			pEntry->PER[CurrRateIdx] = (UCHAR)TxErrorRatio;

			if (bTrainUpDown)
			{
				// perform DRS - consider TxRate Down first, then rate up.
				if ((CurrRateIdx != DownRateIdx) && (pEntry->TxQuality[CurrRateIdx] >= DRS_TX_QUALITY_WORST_BOUND))
				{
					pEntry->CurrTxRateIndex = DownRateIdx;
				}
				else if ((CurrRateIdx != UpRateIdx) && (pEntry->TxQuality[UpRateIdx] <= 0))
				{
					pEntry->CurrTxRateIndex = UpRateIdx;
				}
			}
		} while (FALSE);

		// if rate-up happen, clear all bad history of all TX rates
		if (pEntry->CurrTxRateIndex > CurrRateIdx)
		{
			pEntry->CurrTxRateStableTime = 0;
			pEntry->TxRateUpPenalty = 0;
			pEntry->LastSecTxRateChangeAction = 1; // rate UP
			NdisZeroMemory(pEntry->TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH);
			NdisZeroMemory(pEntry->PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH);

			//
			// For TxRate fast train up
			//
			if (!pAd->StaCfg.StaQuickResponeForRateUpTimerRunning)
			{
				RTMPSetTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, 100);

				pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = TRUE;
			}
			bTxRateChanged = TRUE;
		}
		// if rate-down happen, only clear DownRate's bad history
		else if (pEntry->CurrTxRateIndex < CurrRateIdx)
		{
			pEntry->CurrTxRateStableTime = 0;
			pEntry->TxRateUpPenalty = 0;           // no penalty
			pEntry->LastSecTxRateChangeAction = 2; // rate DOWN
			pEntry->TxQuality[pEntry->CurrTxRateIndex] = 0;
			pEntry->PER[pEntry->CurrTxRateIndex] = 0;

			//
			// For TxRate fast train down
			//
			if (!pAd->StaCfg.StaQuickResponeForRateUpTimerRunning)
			{
				RTMPSetTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, 100);

				pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = TRUE;
			}
			bTxRateChanged = TRUE;
		}
		else
		{
			pEntry->LastSecTxRateChangeAction = 0; // rate no change
			bTxRateChanged = FALSE;
		}

		pEntry->LastTxOkCount = TxSuccess;

		{
			UCHAR tmpTxRate;

			// to fix tcp ack issue
			if (!bTxRateChanged && (pAd->RalinkCounters.OneSecReceivedByteCount > (pAd->RalinkCounters.OneSecTransmittedByteCount * 5)))
			{
				tmpTxRate = DownRateIdx;
				DBGPRINT_RAW(RT_DEBUG_TRACE,("DRS: Rx(%d) is 5 times larger than Tx(%d), use low rate (curr=%d, tmp=%d)\n",
					pAd->RalinkCounters.OneSecReceivedByteCount, pAd->RalinkCounters.OneSecTransmittedByteCount, pEntry->CurrTxRateIndex, tmpTxRate));
			}
			else
			{
				tmpTxRate = pEntry->CurrTxRateIndex;
			}

			pNextTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(tmpTxRate+1)*5];
			if (bTxRateChanged && pNextTxRate)
			{
				MlmeSetTxRate(pAd, pEntry, pNextTxRate);
			}
		}
		// reset all OneSecTx counters
		RESET_ONE_SEC_TX_CNT(pEntry);
	}
}

/*
	========================================================================
	Routine Description:
		Station side, Auto TxRate faster train up timer call back function.

	Arguments:
		SystemSpecific1			- Not used.
		FunctionContext			- Pointer to our Adapter context.
		SystemSpecific2			- Not used.
		SystemSpecific3			- Not used.

	Return Value:
		None

	========================================================================
*/
VOID StaQuickResponeForRateUpExec(
	IN PVOID SystemSpecific1,
	IN PVOID FunctionContext,
	IN PVOID SystemSpecific2,
	IN PVOID SystemSpecific3)
{
	PRTMP_ADAPTER			pAd = (PRTMP_ADAPTER)FunctionContext;
	UCHAR					UpRateIdx = 0, DownRateIdx = 0, CurrRateIdx = 0;
	ULONG					TxTotalCnt;
	ULONG					TxErrorRatio = 0;
	BOOLEAN					bTxRateChanged; //, bUpgradeQuality = FALSE;
	PRTMP_TX_RATE_SWITCH	pCurrTxRate, pNextTxRate = NULL;
	PUCHAR					pTable;
	UCHAR					TableSize = 0;
	UCHAR					InitTxRateIdx = 0, TrainUp, TrainDown;
	TX_STA_CNT1_STRUC		StaTx1;
	TX_STA_CNT0_STRUC		TxStaCnt0;
	CHAR					Rssi, ratio;
	ULONG					TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0;
	MAC_TABLE_ENTRY			*pEntry;
	ULONG					i;

	pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = FALSE;

    //
    // walk through MAC table, see if need to change AP's TX rate toward each entry
    //
	for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++)
	{
		pEntry = &pAd->MacTab.Content[i];

		// check if this entry need to switch rate automatically
		if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pEntry) == FALSE)
			continue;

		if (INFRA_ON(pAd) && (i == 1))
			Rssi = RTMPMaxRssi(pAd,
							   pAd->StaCfg.RssiSample.AvgRssi0,
							   pAd->StaCfg.RssiSample.AvgRssi1,
							   pAd->StaCfg.RssiSample.AvgRssi2);
		else
			Rssi = RTMPMaxRssi(pAd,
							   pEntry->RssiSample.AvgRssi0,
							   pEntry->RssiSample.AvgRssi1,
							   pEntry->RssiSample.AvgRssi2);

	CurrRateIdx = pAd->CommonCfg.TxRateIndex;

			MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &InitTxRateIdx);

	// decide the next upgrade rate and downgrade rate, if any
	if ((CurrRateIdx > 0) && (CurrRateIdx < (TableSize - 1)))
	{
		UpRateIdx = CurrRateIdx + 1;
		DownRateIdx = CurrRateIdx -1;
	}
	else if (CurrRateIdx == 0)
	{
		UpRateIdx = CurrRateIdx + 1;
		DownRateIdx = CurrRateIdx;
	}
	else if (CurrRateIdx == (TableSize - 1))
	{
		UpRateIdx = CurrRateIdx;
		DownRateIdx = CurrRateIdx - 1;
	}

	pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5];

#ifdef DOT11_N_SUPPORT
	if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX))
	{
		TrainUp		= (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1));
		TrainDown	= (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1));
	}
	else
#endif // DOT11_N_SUPPORT //
	{
		TrainUp		= pCurrTxRate->TrainUp;
		TrainDown	= pCurrTxRate->TrainDown;
	}

		if (pAd->MacTab.Size == 1)
		{
	// Update statistic counter
	RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word);
	RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word);

	TxRetransmit = StaTx1.field.TxRetransmit;
	TxSuccess = StaTx1.field.TxSuccess;
	TxFailCount = TxStaCnt0.field.TxFailCount;
	TxTotalCnt = TxRetransmit + TxSuccess + TxFailCount;

	pAd->RalinkCounters.OneSecTxRetryOkCount += StaTx1.field.TxRetransmit;
	pAd->RalinkCounters.OneSecTxNoRetryOkCount += StaTx1.field.TxSuccess;
	pAd->RalinkCounters.OneSecTxFailCount += TxStaCnt0.field.TxFailCount;
			pAd->WlanCounters.TransmittedFragmentCount.u.LowPart += StaTx1.field.TxSuccess;
			pAd->WlanCounters.RetryCount.u.LowPart += StaTx1.field.TxRetransmit;
			pAd->WlanCounters.FailedCount.u.LowPart += TxStaCnt0.field.TxFailCount;

	if (TxTotalCnt)
		TxErrorRatio = ((TxRetransmit + TxFailCount) * 100) / TxTotalCnt;
		}
		else
		{
			TxTotalCnt = pEntry->OneSecTxNoRetryOkCount +
				 pEntry->OneSecTxRetryOkCount +
				 pEntry->OneSecTxFailCount;

			if (TxTotalCnt)
				TxErrorRatio = ((pEntry->OneSecTxRetryOkCount + pEntry->OneSecTxFailCount) * 100) / TxTotalCnt;
		}


	//
	// CASE 1. when TX samples are fewer than 15, then decide TX rate solely on RSSI
	//         (criteria copied from RT2500 for Netopia case)
	//
	if (TxTotalCnt <= 12)
	{
		NdisZeroMemory(pAd->DrsCounters.TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH);
		NdisZeroMemory(pAd->DrsCounters.PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH);

		if ((pAd->DrsCounters.LastSecTxRateChangeAction == 1) && (CurrRateIdx != DownRateIdx))
		{
			pAd->CommonCfg.TxRateIndex = DownRateIdx;
			pAd->DrsCounters.TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND;
		}
		else if ((pAd->DrsCounters.LastSecTxRateChangeAction == 2) && (CurrRateIdx != UpRateIdx))
		{
			pAd->CommonCfg.TxRateIndex = UpRateIdx;
		}

		DBGPRINT_RAW(RT_DEBUG_TRACE,("QuickDRS: TxTotalCnt <= 15, train back to original rate \n"));
		return;
	}

	do
	{
		ULONG OneSecTxNoRetryOKRationCount;

		if (pAd->DrsCounters.LastTimeTxRateChangeAction == 0)
			ratio = 5;
		else
			ratio = 4;

		// downgrade TX quality if PER >= Rate-Down threshold
		if (TxErrorRatio >= TrainDown)
		{
			pAd->DrsCounters.TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND;
		}

		pAd->DrsCounters.PER[CurrRateIdx] = (UCHAR)TxErrorRatio;

		OneSecTxNoRetryOKRationCount = (TxSuccess * ratio);

		// perform DRS - consider TxRate Down first, then rate up.
		if ((pAd->DrsCounters.LastSecTxRateChangeAction == 1) && (CurrRateIdx != DownRateIdx))
		{
			if ((pAd->DrsCounters.LastTxOkCount + 2) >= OneSecTxNoRetryOKRationCount)
		{
			pAd->CommonCfg.TxRateIndex = DownRateIdx;
				pAd->DrsCounters.TxQuality[CurrRateIdx] = DRS_TX_QUALITY_WORST_BOUND;

			}

		}
		else if ((pAd->DrsCounters.LastSecTxRateChangeAction == 2) && (CurrRateIdx != UpRateIdx))
		{
			if ((TxErrorRatio >= 50) || (TxErrorRatio >= TrainDown))
			{

			}
			else if ((pAd->DrsCounters.LastTxOkCount + 2) >= OneSecTxNoRetryOKRationCount)
			{
				pAd->CommonCfg.TxRateIndex = UpRateIdx;
			}
		}
	}while (FALSE);

	// if rate-up happen, clear all bad history of all TX rates
	if (pAd->CommonCfg.TxRateIndex > CurrRateIdx)
	{
		pAd->DrsCounters.TxRateUpPenalty = 0;
		NdisZeroMemory(pAd->DrsCounters.TxQuality, sizeof(USHORT) * MAX_STEP_OF_TX_RATE_SWITCH);
		NdisZeroMemory(pAd->DrsCounters.PER, sizeof(UCHAR) * MAX_STEP_OF_TX_RATE_SWITCH);
			bTxRateChanged = TRUE;
	}
	// if rate-down happen, only clear DownRate's bad history
	else if (pAd->CommonCfg.TxRateIndex < CurrRateIdx)
	{
		DBGPRINT_RAW(RT_DEBUG_TRACE,("QuickDRS: --TX rate from %d to %d \n", CurrRateIdx, pAd->CommonCfg.TxRateIndex));

		pAd->DrsCounters.TxRateUpPenalty = 0;           // no penalty
		pAd->DrsCounters.TxQuality[pAd->CommonCfg.TxRateIndex] = 0;
		pAd->DrsCounters.PER[pAd->CommonCfg.TxRateIndex] = 0;
			bTxRateChanged = TRUE;
	}
	else
	{
		bTxRateChanged = FALSE;
	}

	pNextTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(pAd->CommonCfg.TxRateIndex+1)*5];
	if (bTxRateChanged && pNextTxRate)
	{
			MlmeSetTxRate(pAd, pEntry, pNextTxRate);
		}
	}
}

/*
	==========================================================================
	Description:
		This routine is executed periodically inside MlmePeriodicExec() after
		association with an AP.
		It checks if StaCfg.Psm is consistent with user policy (recorded in
		StaCfg.WindowsPowerMode). If not, enforce user policy. However,
		there're some conditions to consider:
		1. we don't support power-saving in ADHOC mode, so Psm=PWR_ACTIVE all
		   the time when Mibss==TRUE
		2. When link up in INFRA mode, Psm should not be switch to PWR_SAVE
		   if outgoing traffic available in TxRing or MgmtRing.
	Output:
		1. change pAd->StaCfg.Psm to PWR_SAVE or leave it untouched

	IRQL = DISPATCH_LEVEL

	==========================================================================
 */
VOID MlmeCheckPsmChange(
	IN PRTMP_ADAPTER pAd,
	IN ULONG	Now32)
{
	ULONG	PowerMode;

	// condition -
	// 1. Psm maybe ON only happen in INFRASTRUCTURE mode
	// 2. user wants either MAX_PSP or FAST_PSP
	// 3. but current psm is not in PWR_SAVE
	// 4. CNTL state machine is not doing SCANning
	// 5. no TX SUCCESS event for the past 1-sec period
	PowerMode = pAd->StaCfg.WindowsPowerMode;

	if (INFRA_ON(pAd) &&
		(PowerMode != Ndis802_11PowerModeCAM) &&
		(pAd->StaCfg.Psm == PWR_ACTIVE) &&
//		(! RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
		(pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)&&
		RTMP_TEST_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP)
		 /*&&
		(pAd->RalinkCounters.OneSecTxNoRetryOkCount == 0) &&
		(pAd->RalinkCounters.OneSecTxRetryOkCount == 0)*/)
	{
		NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime);
		pAd->RalinkCounters.RxCountSinceLastNULL = 0;
		RTMP_SET_PSM_BIT(pAd, PWR_SAVE);
		if (!(pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable))
		{
			RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, FALSE);
		}
		else
		{
			RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
		}
	}
}

// IRQL = PASSIVE_LEVEL
// IRQL = DISPATCH_LEVEL
VOID MlmeSetPsmBit(
	IN PRTMP_ADAPTER pAd,
	IN USHORT psm)
{
	AUTO_RSP_CFG_STRUC csr4;

	pAd->StaCfg.Psm = psm;
	RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &csr4.word);
	csr4.field.AckCtsPsmBit = (psm == PWR_SAVE)? 1:0;
	RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, csr4.word);
	DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetPsmBit = %d\n", psm));
}
#endif // CONFIG_STA_SUPPORT //

/*
	==========================================================================
	Description:
		This routine calculates TxPER, RxPER of the past N-sec period. And
		according to the calculation result, ChannelQuality is calculated here
		to decide if current AP is still doing the job.

		If ChannelQuality is not good, a ROAMing attempt may be tried later.
	Output:
		StaCfg.ChannelQuality - 0..100

	IRQL = DISPATCH_LEVEL

	NOTE: This routine decide channle quality based on RX CRC error ratio.
		Caller should make sure a function call to NICUpdateRawCounters(pAd)
		is performed right before this routine, so that this routine can decide
		channel quality based on the most up-to-date information
	==========================================================================
 */
VOID MlmeCalculateChannelQuality(
	IN PRTMP_ADAPTER pAd,
	IN PMAC_TABLE_ENTRY pMacEntry,
	IN ULONG Now32)
{
	ULONG TxOkCnt, TxCnt, TxPER, TxPRR;
	ULONG RxCnt, RxPER;
	UCHAR NorRssi;
	CHAR  MaxRssi;
	RSSI_SAMPLE *pRssiSample = NULL;
	UINT32 OneSecTxNoRetryOkCount = 0;
	UINT32 OneSecTxRetryOkCount = 0;
	UINT32 OneSecTxFailCount = 0;
	UINT32 OneSecRxOkCnt = 0;
	UINT32 OneSecRxFcsErrCnt = 0;
	ULONG ChannelQuality = 0;  // 0..100, Channel Quality Indication for Roaming
#ifdef CONFIG_STA_SUPPORT
	ULONG BeaconLostTime = pAd->StaCfg.BeaconLostTime;
#endif // CONFIG_STA_SUPPORT //

#ifdef CONFIG_STA_SUPPORT
#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
	// longer beacon lost time when carrier detection enabled
	if (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
	{
		BeaconLostTime = pAd->StaCfg.BeaconLostTime + (pAd->StaCfg.BeaconLostTime/2);
	}
#endif // CARRIER_DETECTION_SUPPORT //
#endif // CONFIG_STA_SUPPORT //

#ifdef CONFIG_STA_SUPPORT
	if (pAd->OpMode == OPMODE_STA)
	{
		pRssiSample = &pAd->StaCfg.RssiSample;
		OneSecTxNoRetryOkCount = pAd->RalinkCounters.OneSecTxNoRetryOkCount;
		OneSecTxRetryOkCount = pAd->RalinkCounters.OneSecTxRetryOkCount;
		OneSecTxFailCount = pAd->RalinkCounters.OneSecTxFailCount;
		OneSecRxOkCnt = pAd->RalinkCounters.OneSecRxOkCnt;
		OneSecRxFcsErrCnt = pAd->RalinkCounters.OneSecRxFcsErrCnt;
	}
#endif // CONFIG_STA_SUPPORT //

	MaxRssi = RTMPMaxRssi(pAd, pRssiSample->LastRssi0,
								pRssiSample->LastRssi1,
								pRssiSample->LastRssi2);

	//
	// calculate TX packet error ratio and TX retry ratio - if too few TX samples, skip TX related statistics
	//
	TxOkCnt = OneSecTxNoRetryOkCount + OneSecTxRetryOkCount;
	TxCnt = TxOkCnt + OneSecTxFailCount;
	if (TxCnt < 5)
	{
		TxPER = 0;
		TxPRR = 0;
	}
	else
	{
		TxPER = (OneSecTxFailCount * 100) / TxCnt;
		TxPRR = ((TxCnt - OneSecTxNoRetryOkCount) * 100) / TxCnt;
	}

	//
	// calculate RX PER - don't take RxPER into consideration if too few sample
	//
	RxCnt = OneSecRxOkCnt + OneSecRxFcsErrCnt;
	if (RxCnt < 5)
		RxPER = 0;
	else
		RxPER = (OneSecRxFcsErrCnt * 100) / RxCnt;

	//
	// decide ChannelQuality based on: 1)last BEACON received time, 2)last RSSI, 3)TxPER, and 4)RxPER
	//
#ifdef CONFIG_STA_SUPPORT
	if ((pAd->OpMode == OPMODE_STA) &&
		INFRA_ON(pAd) &&
		(OneSecTxNoRetryOkCount < 2) && // no heavy traffic
		((pAd->StaCfg.LastBeaconRxTime + BeaconLostTime) < Now32))
	{
		DBGPRINT(RT_DEBUG_TRACE, ("BEACON lost > %ld msec with TxOkCnt=%ld -> CQI=0\n", BeaconLostTime, TxOkCnt));
		ChannelQuality = 0;
	}
	else
#endif // CONFIG_STA_SUPPORT //
	{
		// Normalize Rssi
		if (MaxRssi > -40)
			NorRssi = 100;
		else if (MaxRssi < -90)
			NorRssi = 0;
		else
			NorRssi = (MaxRssi + 90) * 2;

		// ChannelQuality = W1*RSSI + W2*TxPRR + W3*RxPER	 (RSSI 0..100), (TxPER 100..0), (RxPER 100..0)
		ChannelQuality = (RSSI_WEIGHTING * NorRssi +
								   TX_WEIGHTING * (100 - TxPRR) +
								   RX_WEIGHTING* (100 - RxPER)) / 100;
	}


#ifdef CONFIG_STA_SUPPORT
	if (pAd->OpMode == OPMODE_STA)
		pAd->Mlme.ChannelQuality = (ChannelQuality > 100) ? 100 : ChannelQuality;
#endif // CONFIG_STA_SUPPORT //


}


// IRQL = DISPATCH_LEVEL
VOID MlmeSetTxPreamble(
	IN PRTMP_ADAPTER pAd,
	IN USHORT TxPreamble)
{
	AUTO_RSP_CFG_STRUC csr4;

	//
	// Always use Long preamble before verifiation short preamble functionality works well.
	// Todo: remove the following line if short preamble functionality works
	//
	//TxPreamble = Rt802_11PreambleLong;

	RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &csr4.word);
	if (TxPreamble == Rt802_11PreambleLong)
	{
		DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetTxPreamble (= LONG PREAMBLE)\n"));
		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
		csr4.field.AutoResponderPreamble = 0;
	}
	else
	{
		// NOTE: 1Mbps should always use long preamble
		DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetTxPreamble (= SHORT PREAMBLE)\n"));
		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
		csr4.field.AutoResponderPreamble = 1;
	}

	RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, csr4.word);
}

/*
    ==========================================================================
    Description:
        Update basic rate bitmap
    ==========================================================================
 */

VOID UpdateBasicRateBitmap(
    IN  PRTMP_ADAPTER   pAdapter)
{
    INT  i, j;
                  /* 1  2  5.5, 11,  6,  9, 12, 18, 24, 36, 48,  54 */
    UCHAR rate[] = { 2, 4,  11, 22, 12, 18, 24, 36, 48, 72, 96, 108 };
    UCHAR *sup_p = pAdapter->CommonCfg.SupRate;
    UCHAR *ext_p = pAdapter->CommonCfg.ExtRate;
    ULONG bitmap = pAdapter->CommonCfg.BasicRateBitmap;


    /* if A mode, always use fix BasicRateBitMap */
    //if (pAdapter->CommonCfg.Channel == PHY_11A)
	if (pAdapter->CommonCfg.Channel > 14)
        pAdapter->CommonCfg.BasicRateBitmap = 0x150; /* 6, 12, 24M */
    /* End of if */

    if (pAdapter->CommonCfg.BasicRateBitmap > 4095)
    {
        /* (2 ^ MAX_LEN_OF_SUPPORTED_RATES) -1 */
        return;
    } /* End of if */

    for(i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++)
    {
        sup_p[i] &= 0x7f;
        ext_p[i] &= 0x7f;
    } /* End of for */

    for(i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++)
    {
        if (bitmap & (1 << i))
        {
            for(j=0; j<MAX_LEN_OF_SUPPORTED_RATES; j++)
            {
                if (sup_p[j] == rate[i])
                    sup_p[j] |= 0x80;
                /* End of if */
            } /* End of for */

            for(j=0; j<MAX_LEN_OF_SUPPORTED_RATES; j++)
            {
                if (ext_p[j] == rate[i])
                    ext_p[j] |= 0x80;
                /* End of if */
            } /* End of for */
        } /* End of if */
    } /* End of for */
} /* End of UpdateBasicRateBitmap */

// IRQL = PASSIVE_LEVEL
// IRQL = DISPATCH_LEVEL
// bLinkUp is to identify the inital link speed.
// TRUE indicates the rate update at linkup, we should not try to set the rate at 54Mbps.
VOID MlmeUpdateTxRates(
	IN PRTMP_ADAPTER		pAd,
	IN	BOOLEAN				bLinkUp,
	IN	UCHAR				apidx)
{
	int i, num;
	UCHAR Rate = RATE_6, MaxDesire = RATE_1, MaxSupport = RATE_1;
	UCHAR MinSupport = RATE_54;
	ULONG BasicRateBitmap = 0;
	UCHAR CurrBasicRate = RATE_1;
	UCHAR *pSupRate, SupRateLen, *pExtRate, ExtRateLen;
	PHTTRANSMIT_SETTING		pHtPhy = NULL;
	PHTTRANSMIT_SETTING		pMaxHtPhy = NULL;
	PHTTRANSMIT_SETTING		pMinHtPhy = NULL;
	BOOLEAN					*auto_rate_cur_p;
	UCHAR					HtMcs = MCS_AUTO;

	// find max desired rate
	UpdateBasicRateBitmap(pAd);

	num = 0;
	auto_rate_cur_p = NULL;
	for (i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++)
	{
		switch (pAd->CommonCfg.DesireRate[i] & 0x7f)
		{
			case 2:  Rate = RATE_1;   num++;   break;
			case 4:  Rate = RATE_2;   num++;   break;
			case 11: Rate = RATE_5_5; num++;   break;
			case 22: Rate = RATE_11;  num++;   break;
			case 12: Rate = RATE_6;   num++;   break;
			case 18: Rate = RATE_9;   num++;   break;
			case 24: Rate = RATE_12;  num++;   break;
			case 36: Rate = RATE_18;  num++;   break;
			case 48: Rate = RATE_24;  num++;   break;
			case 72: Rate = RATE_36;  num++;   break;
			case 96: Rate = RATE_48;  num++;   break;
			case 108: Rate = RATE_54; num++;   break;
			//default: Rate = RATE_1;   break;
		}
		if (MaxDesire < Rate)  MaxDesire = Rate;
	}

//===========================================================================
//===========================================================================

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		pHtPhy		= &pAd->StaCfg.HTPhyMode;
		pMaxHtPhy	= &pAd->StaCfg.MaxHTPhyMode;
		pMinHtPhy	= &pAd->StaCfg.MinHTPhyMode;

		auto_rate_cur_p = &pAd->StaCfg.bAutoTxRateSwitch;
		HtMcs		= pAd->StaCfg.DesiredTransmitSetting.field.MCS;

		if ((pAd->StaCfg.BssType == BSS_ADHOC) &&
			(pAd->CommonCfg.PhyMode == PHY_11B) &&
		(MaxDesire > RATE_11))
		{
			MaxDesire = RATE_11;
		}
	}
#endif // CONFIG_STA_SUPPORT //

	pAd->CommonCfg.MaxDesiredRate = MaxDesire;
	pMinHtPhy->word = 0;
	pMaxHtPhy->word = 0;
	pHtPhy->word = 0;

	// Auto rate switching is enabled only if more than one DESIRED RATES are
	// specified; otherwise disabled
	if (num <= 1)
	{
		//OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
		//pAd->CommonCfg.bAutoTxRateSwitch	= FALSE;
		*auto_rate_cur_p = FALSE;
	}
	else
	{
		//OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
		//pAd->CommonCfg.bAutoTxRateSwitch	= TRUE;
		*auto_rate_cur_p = TRUE;
	}

	if (HtMcs != MCS_AUTO)
	{
		//OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
		//pAd->CommonCfg.bAutoTxRateSwitch	= FALSE;
		*auto_rate_cur_p = FALSE;
	}
	else
	{
		//OPSTATUS_SET_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED);
		//pAd->CommonCfg.bAutoTxRateSwitch	= TRUE;
		*auto_rate_cur_p = TRUE;
	}

#ifdef CONFIG_STA_SUPPORT
	if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))
	{
		pSupRate = &pAd->StaActive.SupRate[0];
		pExtRate = &pAd->StaActive.ExtRate[0];
		SupRateLen = pAd->StaActive.SupRateLen;
		ExtRateLen = pAd->StaActive.ExtRateLen;
	}
	else
#endif // CONFIG_STA_SUPPORT //
	{
		pSupRate = &pAd->CommonCfg.SupRate[0];
		pExtRate = &pAd->CommonCfg.ExtRate[0];
		SupRateLen = pAd->CommonCfg.SupRateLen;
		ExtRateLen = pAd->CommonCfg.ExtRateLen;
	}

	// find max supported rate
	for (i=0; i<SupRateLen; i++)
	{
		switch (pSupRate[i] & 0x7f)
		{
			case 2:   Rate = RATE_1;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0001;	 break;
			case 4:   Rate = RATE_2;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0002;	 break;
			case 11:  Rate = RATE_5_5;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0004;	 break;
			case 22:  Rate = RATE_11;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0008;	 break;
			case 12:  Rate = RATE_6;	/*if (pSupRate[i] & 0x80)*/  BasicRateBitmap |= 0x0010;  break;
			case 18:  Rate = RATE_9;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0020;	 break;
			case 24:  Rate = RATE_12;	/*if (pSupRate[i] & 0x80)*/  BasicRateBitmap |= 0x0040;  break;
			case 36:  Rate = RATE_18;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0080;	 break;
			case 48:  Rate = RATE_24;	/*if (pSupRate[i] & 0x80)*/  BasicRateBitmap |= 0x0100;  break;
			case 72:  Rate = RATE_36;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0200;	 break;
			case 96:  Rate = RATE_48;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0400;	 break;
			case 108: Rate = RATE_54;	if (pSupRate[i] & 0x80) BasicRateBitmap |= 0x0800;	 break;
			default:  Rate = RATE_1;	break;
		}
		if (MaxSupport < Rate)	MaxSupport = Rate;

		if (MinSupport > Rate) MinSupport = Rate;
	}

	for (i=0; i<ExtRateLen; i++)
	{
		switch (pExtRate[i] & 0x7f)
		{
			case 2:   Rate = RATE_1;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0001;	 break;
			case 4:   Rate = RATE_2;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0002;	 break;
			case 11:  Rate = RATE_5_5;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0004;	 break;
			case 22:  Rate = RATE_11;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0008;	 break;
			case 12:  Rate = RATE_6;	/*if (pExtRate[i] & 0x80)*/  BasicRateBitmap |= 0x0010;  break;
			case 18:  Rate = RATE_9;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0020;	 break;
			case 24:  Rate = RATE_12;	/*if (pExtRate[i] & 0x80)*/  BasicRateBitmap |= 0x0040;  break;
			case 36:  Rate = RATE_18;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0080;	 break;
			case 48:  Rate = RATE_24;	/*if (pExtRate[i] & 0x80)*/  BasicRateBitmap |= 0x0100;  break;
			case 72:  Rate = RATE_36;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0200;	 break;
			case 96:  Rate = RATE_48;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0400;	 break;
			case 108: Rate = RATE_54;	if (pExtRate[i] & 0x80) BasicRateBitmap |= 0x0800;	 break;
			default:  Rate = RATE_1;	break;
		}
		if (MaxSupport < Rate)	MaxSupport = Rate;

		if (MinSupport > Rate) MinSupport = Rate;
	}

	RTMP_IO_WRITE32(pAd, LEGACY_BASIC_RATE, BasicRateBitmap);

	// bug fix
	// pAd->CommonCfg.BasicRateBitmap = BasicRateBitmap;

	// calculate the exptected ACK rate for each TX rate. This info is used to caculate
	// the DURATION field of outgoing uniicast DATA/MGMT frame
	for (i=0; i<MAX_LEN_OF_SUPPORTED_RATES; i++)
	{
		if (BasicRateBitmap & (0x01 << i))
			CurrBasicRate = (UCHAR)i;
		pAd->CommonCfg.ExpectedACKRate[i] = CurrBasicRate;
	}

	DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateTxRates[MaxSupport = %d] = MaxDesire %d Mbps\n", RateIdToMbps[MaxSupport], RateIdToMbps[MaxDesire]));
	// max tx rate = min {max desire rate, max supported rate}
	if (MaxSupport < MaxDesire)
		pAd->CommonCfg.MaxTxRate = MaxSupport;
	else
		pAd->CommonCfg.MaxTxRate = MaxDesire;

	pAd->CommonCfg.MinTxRate = MinSupport;
	// 2003-07-31 john - 2500 doesn't have good sensitivity at high OFDM rates. to increase the success
	// ratio of initial DHCP packet exchange, TX rate starts from a lower rate depending
	// on average RSSI
	//	 1. RSSI >= -70db, start at 54 Mbps (short distance)
	//	 2. -70 > RSSI >= -75, start at 24 Mbps (mid distance)
	//	 3. -75 > RSSI, start at 11 Mbps (long distance)
	//if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)/* &&
	//	OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)*/)
	if (*auto_rate_cur_p)
	{
		short dbm = 0;
#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
			dbm = pAd->StaCfg.RssiSample.AvgRssi0 - pAd->BbpRssiToDbmDelta;
#endif // CONFIG_STA_SUPPORT //
		if (bLinkUp == TRUE)
			pAd->CommonCfg.TxRate = RATE_24;
		else
			pAd->CommonCfg.TxRate = pAd->CommonCfg.MaxTxRate;

		if (dbm < -75)
			pAd->CommonCfg.TxRate = RATE_11;
		else if (dbm < -70)
			pAd->CommonCfg.TxRate = RATE_24;

		// should never exceed MaxTxRate (consider 11B-only mode)
		if (pAd->CommonCfg.TxRate > pAd->CommonCfg.MaxTxRate)
			pAd->CommonCfg.TxRate = pAd->CommonCfg.MaxTxRate;

		pAd->CommonCfg.TxRateIndex = 0;
	}
	else
	{
		pAd->CommonCfg.TxRate = pAd->CommonCfg.MaxTxRate;
		pHtPhy->field.MCS	= (pAd->CommonCfg.MaxTxRate > 3) ? (pAd->CommonCfg.MaxTxRate - 4) : pAd->CommonCfg.MaxTxRate;
		pHtPhy->field.MODE	= (pAd->CommonCfg.MaxTxRate > 3) ? MODE_OFDM : MODE_CCK;

		pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.STBC	= pHtPhy->field.STBC;
		pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.ShortGI	= pHtPhy->field.ShortGI;
		pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MCS		= pHtPhy->field.MCS;
		pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE	= pHtPhy->field.MODE;
	}

	if (pAd->CommonCfg.TxRate <= RATE_11)
	{
		pMaxHtPhy->field.MODE = MODE_CCK;
		pMaxHtPhy->field.MCS = pAd->CommonCfg.TxRate;
		pMinHtPhy->field.MCS = pAd->CommonCfg.MinTxRate;
	}
	else
	{
		pMaxHtPhy->field.MODE = MODE_OFDM;
		pMaxHtPhy->field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.TxRate];
		if (pAd->CommonCfg.MinTxRate >= RATE_6 && (pAd->CommonCfg.MinTxRate <= RATE_54))
			{pMinHtPhy->field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MinTxRate];}
		else
			{pMinHtPhy->field.MCS = pAd->CommonCfg.MinTxRate;}
	}

	pHtPhy->word = (pMaxHtPhy->word);
	if (bLinkUp && (pAd->OpMode == OPMODE_STA))
	{
			pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word = pHtPhy->word;
			pAd->MacTab.Content[BSSID_WCID].MaxHTPhyMode.word = pMaxHtPhy->word;
			pAd->MacTab.Content[BSSID_WCID].MinHTPhyMode.word = pMinHtPhy->word;
	}
	else
	{
		switch (pAd->CommonCfg.PhyMode)
		{
			case PHY_11BG_MIXED:
			case PHY_11B:
#ifdef DOT11_N_SUPPORT
			case PHY_11BGN_MIXED:
#endif // DOT11_N_SUPPORT //
				pAd->CommonCfg.MlmeRate = RATE_1;
				pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
				pAd->CommonCfg.MlmeTransmit.field.MCS = RATE_1;

//#ifdef	WIFI_TEST
				pAd->CommonCfg.RtsRate = RATE_11;
//#else
//				pAd->CommonCfg.RtsRate = RATE_1;
//#endif
				break;
			case PHY_11G:
			case PHY_11A:
#ifdef DOT11_N_SUPPORT
			case PHY_11AGN_MIXED:
			case PHY_11GN_MIXED:
			case PHY_11N_2_4G:
			case PHY_11AN_MIXED:
			case PHY_11N_5G:
#endif // DOT11_N_SUPPORT //
				pAd->CommonCfg.MlmeRate = RATE_6;
				pAd->CommonCfg.RtsRate = RATE_6;
				pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
				pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
				break;
			case PHY_11ABG_MIXED:
#ifdef DOT11_N_SUPPORT
			case PHY_11ABGN_MIXED:
#endif // DOT11_N_SUPPORT //
				if (pAd->CommonCfg.Channel <= 14)
				{
					pAd->CommonCfg.MlmeRate = RATE_1;
					pAd->CommonCfg.RtsRate = RATE_1;
					pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
					pAd->CommonCfg.MlmeTransmit.field.MCS = RATE_1;
				}
				else
				{
					pAd->CommonCfg.MlmeRate = RATE_6;
					pAd->CommonCfg.RtsRate = RATE_6;
					pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
					pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
				}
				break;
			default: // error
				pAd->CommonCfg.MlmeRate = RATE_6;
				pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
				pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
				pAd->CommonCfg.RtsRate = RATE_1;
				break;
		}
		//
		// Keep Basic Mlme Rate.
		//
		pAd->MacTab.Content[MCAST_WCID].HTPhyMode.word = pAd->CommonCfg.MlmeTransmit.word;
		if (pAd->CommonCfg.MlmeTransmit.field.MODE == MODE_OFDM)
			pAd->MacTab.Content[MCAST_WCID].HTPhyMode.field.MCS = OfdmRateToRxwiMCS[RATE_24];
		else
			pAd->MacTab.Content[MCAST_WCID].HTPhyMode.field.MCS = RATE_1;
		pAd->CommonCfg.BasicMlmeRate = pAd->CommonCfg.MlmeRate;
	}

	DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (MaxDesire=%d, MaxSupport=%d, MaxTxRate=%d, MinRate=%d, Rate Switching =%d)\n",
			 RateIdToMbps[MaxDesire], RateIdToMbps[MaxSupport], RateIdToMbps[pAd->CommonCfg.MaxTxRate], RateIdToMbps[pAd->CommonCfg.MinTxRate],
			 /*OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)*/*auto_rate_cur_p));
	DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (TxRate=%d, RtsRate=%d, BasicRateBitmap=0x%04lx)\n",
			 RateIdToMbps[pAd->CommonCfg.TxRate], RateIdToMbps[pAd->CommonCfg.RtsRate], BasicRateBitmap));
	DBGPRINT(RT_DEBUG_TRACE, ("MlmeUpdateTxRates (MlmeTransmit=0x%x, MinHTPhyMode=%x, MaxHTPhyMode=0x%x, HTPhyMode=0x%x)\n",
			 pAd->CommonCfg.MlmeTransmit.word, pAd->MacTab.Content[BSSID_WCID].MinHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].MaxHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word ));
}

#ifdef DOT11_N_SUPPORT
/*
	==========================================================================
	Description:
		This function update HT Rate setting.
		Input Wcid value is valid for 2 case :
		1. it's used for Station in infra mode that copy AP rate to Mactable.
		2. OR Station	in adhoc mode to copy peer's HT rate to Mactable.

	IRQL = DISPATCH_LEVEL

	==========================================================================
 */
VOID MlmeUpdateHtTxRates(
	IN PRTMP_ADAPTER		pAd,
	IN	UCHAR				apidx)
{
	UCHAR	StbcMcs; //j, StbcMcs, bitmask;
	CHAR	i; // 3*3
	RT_HT_CAPABILITY	*pRtHtCap = NULL;
	RT_HT_PHY_INFO		*pActiveHtPhy = NULL;
	ULONG		BasicMCS;
	UCHAR j, bitmask;
	PRT_HT_PHY_INFO			pDesireHtPhy = NULL;
	PHTTRANSMIT_SETTING		pHtPhy = NULL;
	PHTTRANSMIT_SETTING		pMaxHtPhy = NULL;
	PHTTRANSMIT_SETTING		pMinHtPhy = NULL;
	BOOLEAN					*auto_rate_cur_p;

	DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates===> \n"));

	auto_rate_cur_p = NULL;

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		pDesireHtPhy	= &pAd->StaCfg.DesiredHtPhyInfo;
		pActiveHtPhy	= &pAd->StaCfg.DesiredHtPhyInfo;
		pHtPhy		= &pAd->StaCfg.HTPhyMode;
		pMaxHtPhy	= &pAd->StaCfg.MaxHTPhyMode;
		pMinHtPhy	= &pAd->StaCfg.MinHTPhyMode;

		auto_rate_cur_p = &pAd->StaCfg.bAutoTxRateSwitch;
	}
#endif // CONFIG_STA_SUPPORT //

#ifdef CONFIG_STA_SUPPORT
	if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))
	{
		if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
			return;

		pRtHtCap = &pAd->StaActive.SupportedHtPhy;
		pActiveHtPhy = &pAd->StaActive.SupportedPhyInfo;
		StbcMcs = (UCHAR)pAd->MlmeAux.AddHtInfo.AddHtInfo3.StbcMcs;
		BasicMCS =pAd->MlmeAux.AddHtInfo.MCSSet[0]+(pAd->MlmeAux.AddHtInfo.MCSSet[1]<<8)+(StbcMcs<<16);
		if ((pAd->CommonCfg.DesiredHtPhy.TxSTBC) && (pRtHtCap->RxSTBC) && (pAd->Antenna.field.TxPath == 2))
			pMaxHtPhy->field.STBC = STBC_USE;
		else
			pMaxHtPhy->field.STBC = STBC_NONE;
	}
	else
#endif // CONFIG_STA_SUPPORT //
	{
		if (pDesireHtPhy->bHtEnable == FALSE)
			return;

		pRtHtCap = &pAd->CommonCfg.DesiredHtPhy;
		StbcMcs = (UCHAR)pAd->CommonCfg.AddHTInfo.AddHtInfo3.StbcMcs;
		BasicMCS = pAd->CommonCfg.AddHTInfo.MCSSet[0]+(pAd->CommonCfg.AddHTInfo.MCSSet[1]<<8)+(StbcMcs<<16);
		if ((pAd->CommonCfg.DesiredHtPhy.TxSTBC) && (pRtHtCap->RxSTBC) && (pAd->Antenna.field.TxPath == 2))
			pMaxHtPhy->field.STBC = STBC_USE;
		else
			pMaxHtPhy->field.STBC = STBC_NONE;
	}

	// Decide MAX ht rate.
	if ((pRtHtCap->GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
		pMaxHtPhy->field.MODE = MODE_HTGREENFIELD;
	else
		pMaxHtPhy->field.MODE = MODE_HTMIX;

    if ((pAd->CommonCfg.DesiredHtPhy.ChannelWidth) && (pRtHtCap->ChannelWidth))
		pMaxHtPhy->field.BW = BW_40;
	else
		pMaxHtPhy->field.BW = BW_20;

    if (pMaxHtPhy->field.BW == BW_20)
		pMaxHtPhy->field.ShortGI = (pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 & pRtHtCap->ShortGIfor20);
	else
		pMaxHtPhy->field.ShortGI = (pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 & pRtHtCap->ShortGIfor40);

	if (pDesireHtPhy->MCSSet[4] != 0)
	{
		pMaxHtPhy->field.MCS = 32;
	}

	for (i=23; i>=0; i--) // 3*3
	{
		j = i/8;
		bitmask = (1<<(i-(j*8)));

		if ((pActiveHtPhy->MCSSet[j] & bitmask) && (pDesireHtPhy->MCSSet[j] & bitmask))
		{
			pMaxHtPhy->field.MCS = i;
			break;
		}

		if (i==0)
			break;
	}

	// Copy MIN ht rate.  rt2860???
	pMinHtPhy->field.BW = BW_20;
	pMinHtPhy->field.MCS = 0;
	pMinHtPhy->field.STBC = 0;
	pMinHtPhy->field.ShortGI = 0;
	//If STA assigns fixed rate. update to fixed here.
#ifdef CONFIG_STA_SUPPORT
	if ( (pAd->OpMode == OPMODE_STA) && (pDesireHtPhy->MCSSet[0] != 0xff))
	{
		if (pDesireHtPhy->MCSSet[4] != 0)
		{
			pMaxHtPhy->field.MCS = 32;
			pMinHtPhy->field.MCS = 32;
			DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates<=== Use Fixed MCS = %d\n",pMinHtPhy->field.MCS));
		}

		for (i=23; (CHAR)i >= 0; i--) // 3*3
		{
			j = i/8;
			bitmask = (1<<(i-(j*8)));
			if ( (pDesireHtPhy->MCSSet[j] & bitmask) && (pActiveHtPhy->MCSSet[j] & bitmask))
			{
				pMaxHtPhy->field.MCS = i;
				pMinHtPhy->field.MCS = i;
				break;
			}
			if (i==0)
				break;
		}
	}
#endif // CONFIG_STA_SUPPORT //


	// Decide ht rate
	pHtPhy->field.STBC = pMaxHtPhy->field.STBC;
	pHtPhy->field.BW = pMaxHtPhy->field.BW;
	pHtPhy->field.MODE = pMaxHtPhy->field.MODE;
	pHtPhy->field.MCS = pMaxHtPhy->field.MCS;
	pHtPhy->field.ShortGI = pMaxHtPhy->field.ShortGI;

	// use default now. rt2860
	if (pDesireHtPhy->MCSSet[0] != 0xff)
		*auto_rate_cur_p = FALSE;
	else
		*auto_rate_cur_p = TRUE;

	DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateHtTxRates<---.AMsduSize = %d  \n", pAd->CommonCfg.DesiredHtPhy.AmsduSize ));
	DBGPRINT(RT_DEBUG_TRACE,("TX: MCS[0] = %x (choose %d), BW = %d, ShortGI = %d, MODE = %d,  \n", pActiveHtPhy->MCSSet[0],pHtPhy->field.MCS,
		pHtPhy->field.BW, pHtPhy->field.ShortGI, pHtPhy->field.MODE));
	DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates<=== \n"));
}


VOID BATableInit(
	IN PRTMP_ADAPTER pAd,
    IN BA_TABLE *Tab)
{
	int i;

	Tab->numAsOriginator = 0;
	Tab->numAsRecipient = 0;
	Tab->numDoneOriginator = 0;
	NdisAllocateSpinLock(&pAd->BATabLock);
	for (i = 0; i < MAX_LEN_OF_BA_REC_TABLE; i++)
	{
		Tab->BARecEntry[i].REC_BA_Status = Recipient_NONE;
		NdisAllocateSpinLock(&(Tab->BARecEntry[i].RxReRingLock));
	}
	for (i = 0; i < MAX_LEN_OF_BA_ORI_TABLE; i++)
	{
		Tab->BAOriEntry[i].ORI_BA_Status = Originator_NONE;
	}
}
#endif // DOT11_N_SUPPORT //

// IRQL = DISPATCH_LEVEL
VOID MlmeRadioOff(
	IN PRTMP_ADAPTER pAd)
{
	RTMP_MLME_RADIO_OFF(pAd);
}

// IRQL = DISPATCH_LEVEL
VOID MlmeRadioOn(
	IN PRTMP_ADAPTER pAd)
{
	RTMP_MLME_RADIO_ON(pAd);
}

// ===========================================================================================
// bss_table.c
// ===========================================================================================


/*! \brief initialize BSS table
 *	\param p_tab pointer to the table
 *	\return none
 *	\pre
 *	\post

 IRQL = PASSIVE_LEVEL
 IRQL = DISPATCH_LEVEL

 */
VOID BssTableInit(
	IN BSS_TABLE *Tab)
{
	int i;

	Tab->BssNr = 0;
    Tab->BssOverlapNr = 0;
	for (i = 0; i < MAX_LEN_OF_BSS_TABLE; i++)
	{
		NdisZeroMemory(&Tab->BssEntry[i], sizeof(BSS_ENTRY));
		Tab->BssEntry[i].Rssi = -127;	// initial the rssi as a minimum value
	}
}


/*! \brief search the BSS table by SSID
 *	\param p_tab pointer to the bss table
 *	\param ssid SSID string
 *	\return index of the table, BSS_NOT_FOUND if not in the table
 *	\pre
 *	\post
 *	\note search by sequential search

 IRQL = DISPATCH_LEVEL

 */
ULONG BssTableSearch(
	IN BSS_TABLE *Tab,
	IN PUCHAR	 pBssid,
	IN UCHAR	 Channel)
{
	UCHAR i;

	for (i = 0; i < Tab->BssNr; i++)
	{
		//
		// Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G.
		// We should distinguish this case.
		//
		if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) ||
			 ((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) &&
			MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid))
		{
			return i;
		}
	}
	return (ULONG)BSS_NOT_FOUND;
}

ULONG BssSsidTableSearch(
	IN BSS_TABLE *Tab,
	IN PUCHAR	 pBssid,
	IN PUCHAR	 pSsid,
	IN UCHAR	 SsidLen,
	IN UCHAR	 Channel)
{
	UCHAR i;

	for (i = 0; i < Tab->BssNr; i++)
	{
		//
		// Some AP that support A/B/G mode that may used the same BSSID on 11A and 11B/G.
		// We should distinguish this case.
		//
		if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) ||
			 ((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) &&
			MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid) &&
			SSID_EQUAL(pSsid, SsidLen, Tab->BssEntry[i].Ssid, Tab->BssEntry[i].SsidLen))
		{
			return i;
		}
	}
	return (ULONG)BSS_NOT_FOUND;
}

ULONG BssTableSearchWithSSID(
	IN BSS_TABLE *Tab,
	IN PUCHAR	 Bssid,
	IN PUCHAR	 pSsid,
	IN UCHAR	 SsidLen,
	IN UCHAR	 Channel)
{
	UCHAR i;

	for (i = 0; i < Tab->BssNr; i++)
	{
		if ((((Tab->BssEntry[i].Channel <= 14) && (Channel <= 14)) ||
			((Tab->BssEntry[i].Channel > 14) && (Channel > 14))) &&
			MAC_ADDR_EQUAL(&(Tab->BssEntry[i].Bssid), Bssid) &&
			(SSID_EQUAL(pSsid, SsidLen, Tab->BssEntry[i].Ssid, Tab->BssEntry[i].SsidLen) ||
			(NdisEqualMemory(pSsid, ZeroSsid, SsidLen)) ||
			(NdisEqualMemory(Tab->BssEntry[i].Ssid, ZeroSsid, Tab->BssEntry[i].SsidLen))))
		{
			return i;
		}
	}
	return (ULONG)BSS_NOT_FOUND;
}


ULONG BssSsidTableSearchBySSID(
	IN BSS_TABLE *Tab,
	IN PUCHAR	 pSsid,
	IN UCHAR	 SsidLen)
{
	UCHAR i;

	for (i = 0; i < Tab->BssNr; i++)
	{
		if (SSID_EQUAL(pSsid, SsidLen, Tab->BssEntry[i].Ssid, Tab->BssEntry[i].SsidLen))
		{
			return i;
		}
	}
	return (ULONG)BSS_NOT_FOUND;
}


// IRQL = DISPATCH_LEVEL
VOID BssTableDeleteEntry(
	IN OUT	BSS_TABLE *Tab,
	IN		PUCHAR	  pBssid,
	IN		UCHAR	  Channel)
{
	UCHAR i, j;

	for (i = 0; i < Tab->BssNr; i++)
	{
		if ((Tab->BssEntry[i].Channel == Channel) &&
			(MAC_ADDR_EQUAL(Tab->BssEntry[i].Bssid, pBssid)))
		{
			for (j = i; j < Tab->BssNr - 1; j++)
			{
				NdisMoveMemory(&(Tab->BssEntry[j]), &(Tab->BssEntry[j + 1]), sizeof(BSS_ENTRY));
			}
			NdisZeroMemory(&(Tab->BssEntry[Tab->BssNr - 1]), sizeof(BSS_ENTRY));
			Tab->BssNr -= 1;
			return;
		}
	}
}

#ifdef DOT11_N_SUPPORT
/*
	========================================================================
	Routine Description:
		Delete the Originator Entry in BAtable. Or decrease numAs Originator by 1 if needed.

	Arguments:
	// IRQL = DISPATCH_LEVEL
	========================================================================
*/
VOID BATableDeleteORIEntry(
	IN OUT	PRTMP_ADAPTER pAd,
	IN		BA_ORI_ENTRY	*pBAORIEntry)
{

	if (pBAORIEntry->ORI_BA_Status != Originator_NONE)
	{
		NdisAcquireSpinLock(&pAd->BATabLock);
		if (pBAORIEntry->ORI_BA_Status == Originator_Done)
		{
			pAd->BATable.numAsOriginator -= 1;
			DBGPRINT(RT_DEBUG_TRACE, ("BATableDeleteORIEntry numAsOriginator= %ld\n", pAd->BATable.numAsRecipient));
			// Erase Bitmap flag.
		}
		pAd->MacTab.Content[pBAORIEntry->Wcid].TXBAbitmap &= (~(1<<(pBAORIEntry->TID) ));	// If STA mode,  erase flag here
		pAd->MacTab.Content[pBAORIEntry->Wcid].BAOriWcidArray[pBAORIEntry->TID] = 0;	// If STA mode,  erase flag here
		pBAORIEntry->ORI_BA_Status = Originator_NONE;
		pBAORIEntry->Token = 1;
		// Not clear Sequence here.
		NdisReleaseSpinLock(&pAd->BATabLock);
	}
}
#endif // DOT11_N_SUPPORT //

/*! \brief
 *	\param
 *	\return
 *	\pre
 *	\post

 IRQL = DISPATCH_LEVEL

 */
VOID BssEntrySet(
	IN PRTMP_ADAPTER	pAd,
	OUT BSS_ENTRY *pBss,
	IN PUCHAR pBssid,
	IN CHAR Ssid[],
	IN UCHAR SsidLen,
	IN UCHAR BssType,
	IN USHORT BeaconPeriod,
	IN PCF_PARM pCfParm,
	IN USHORT AtimWin,
	IN USHORT CapabilityInfo,
	IN UCHAR SupRate[],
	IN UCHAR SupRateLen,
	IN UCHAR ExtRate[],
	IN UCHAR ExtRateLen,
	IN HT_CAPABILITY_IE *pHtCapability,
	IN ADD_HT_INFO_IE *pAddHtInfo,	// AP might use this additional ht info IE
	IN UCHAR			HtCapabilityLen,
	IN UCHAR			AddHtInfoLen,
	IN UCHAR			NewExtChanOffset,
	IN UCHAR Channel,
	IN CHAR Rssi,
	IN LARGE_INTEGER TimeStamp,
	IN UCHAR CkipFlag,
	IN PEDCA_PARM pEdcaParm,
	IN PQOS_CAPABILITY_PARM pQosCapability,
	IN PQBSS_LOAD_PARM pQbssLoad,
	IN USHORT LengthVIE,
	IN PNDIS_802_11_VARIABLE_IEs pVIE)
{
	COPY_MAC_ADDR(pBss->Bssid, pBssid);
	// Default Hidden SSID to be TRUE, it will be turned to FALSE after coping SSID
	pBss->Hidden = 1;
	if (SsidLen > 0)
	{
		// For hidden SSID AP, it might send beacon with SSID len equal to 0
		// Or send beacon /probe response with SSID len matching real SSID length,
		// but SSID is all zero. such as "00-00-00-00" with length 4.
		// We have to prevent this case overwrite correct table
		if (NdisEqualMemory(Ssid, ZeroSsid, SsidLen) == 0)
		{
		    NdisZeroMemory(pBss->Ssid, MAX_LEN_OF_SSID);
			NdisMoveMemory(pBss->Ssid, Ssid, SsidLen);
			pBss->SsidLen = SsidLen;
			pBss->Hidden = 0;
		}
	}
	else
		pBss->SsidLen = 0;
	pBss->BssType = BssType;
	pBss->BeaconPeriod = BeaconPeriod;
	if (BssType == BSS_INFRA)
	{
		if (pCfParm->bValid)
		{
			pBss->CfpCount = pCfParm->CfpCount;
			pBss->CfpPeriod = pCfParm->CfpPeriod;
			pBss->CfpMaxDuration = pCfParm->CfpMaxDuration;
			pBss->CfpDurRemaining = pCfParm->CfpDurRemaining;
		}
	}
	else
	{
		pBss->AtimWin = AtimWin;
	}

	pBss->CapabilityInfo = CapabilityInfo;
	// The privacy bit indicate security is ON, it maight be WEP, TKIP or AES
	// Combine with AuthMode, they will decide the connection methods.
	pBss->Privacy = CAP_IS_PRIVACY_ON(pBss->CapabilityInfo);
	ASSERT(SupRateLen <= MAX_LEN_OF_SUPPORTED_RATES);
	if (SupRateLen <= MAX_LEN_OF_SUPPORTED_RATES)
		NdisMoveMemory(pBss->SupRate, SupRate, SupRateLen);
	else
		NdisMoveMemory(pBss->SupRate, SupRate, MAX_LEN_OF_SUPPORTED_RATES);
	pBss->SupRateLen = SupRateLen;
	ASSERT(ExtRateLen <= MAX_LEN_OF_SUPPORTED_RATES);
	NdisMoveMemory(pBss->ExtRate, ExtRate, ExtRateLen);
	pBss->NewExtChanOffset = NewExtChanOffset;
	pBss->ExtRateLen = ExtRateLen;
	pBss->Channel = Channel;
	pBss->CentralChannel = Channel;
	pBss->Rssi = Rssi;
	// Update CkipFlag. if not exists, the value is 0x0
	pBss->CkipFlag = CkipFlag;

	// New for microsoft Fixed IEs
	NdisMoveMemory(pBss->FixIEs.Timestamp, &TimeStamp, 8);
	pBss->FixIEs.BeaconInterval = BeaconPeriod;
	pBss->FixIEs.Capabilities = CapabilityInfo;

	// New for microsoft Variable IEs
	if (LengthVIE != 0)
	{
		pBss->VarIELen = LengthVIE;
		NdisMoveMemory(pBss->VarIEs, pVIE, pBss->VarIELen);
	}
	else
	{
		pBss->VarIELen = 0;
	}

	pBss->AddHtInfoLen = 0;
	pBss->HtCapabilityLen = 0;
#ifdef DOT11_N_SUPPORT
	if (HtCapabilityLen> 0)
	{
		pBss->HtCapabilityLen = HtCapabilityLen;
		NdisMoveMemory(&pBss->HtCapability, pHtCapability, HtCapabilityLen);
		if (AddHtInfoLen > 0)
		{
			pBss->AddHtInfoLen = AddHtInfoLen;
			NdisMoveMemory(&pBss->AddHtInfo, pAddHtInfo, AddHtInfoLen);

				if ((pAddHtInfo->ControlChan > 2)&& (pAddHtInfo->AddHtInfo.ExtChanOffset == EXTCHA_BELOW) && (pHtCapability->HtCapInfo.ChannelWidth == BW_40))
				{
					pBss->CentralChannel = pAddHtInfo->ControlChan - 2;
				}
				else if ((pAddHtInfo->AddHtInfo.ExtChanOffset == EXTCHA_ABOVE) && (pHtCapability->HtCapInfo.ChannelWidth == BW_40))
				{
						pBss->CentralChannel = pAddHtInfo->ControlChan + 2;
				}
		}
	}
#endif // DOT11_N_SUPPORT //

	BssCipherParse(pBss);

	// new for QOS
	if (pEdcaParm)
		NdisMoveMemory(&pBss->EdcaParm, pEdcaParm, sizeof(EDCA_PARM));
	else
		pBss->EdcaParm.bValid = FALSE;
	if (pQosCapability)
		NdisMoveMemory(&pBss->QosCapability, pQosCapability, sizeof(QOS_CAPABILITY_PARM));
	else
		pBss->QosCapability.bValid = FALSE;
	if (pQbssLoad)
		NdisMoveMemory(&pBss->QbssLoad, pQbssLoad, sizeof(QBSS_LOAD_PARM));
	else
		pBss->QbssLoad.bValid = FALSE;

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		PEID_STRUCT     pEid;
		USHORT          Length = 0;


		NdisZeroMemory(&pBss->WpaIE.IE[0], MAX_CUSTOM_LEN);
		NdisZeroMemory(&pBss->RsnIE.IE[0], MAX_CUSTOM_LEN);
#ifdef EXT_BUILD_CHANNEL_LIST
		NdisZeroMemory(&pBss->CountryString[0], 3);
		pBss->bHasCountryIE = FALSE;
#endif // EXT_BUILD_CHANNEL_LIST //
		pEid = (PEID_STRUCT) pVIE;
		while ((Length + 2 + (USHORT)pEid->Len) <= LengthVIE)
		{
			switch(pEid->Eid)
			{
				case IE_WPA:
					if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4))
					{
						if ((pEid->Len + 2) > MAX_CUSTOM_LEN)
						{
							pBss->WpaIE.IELen = 0;
							break;
						}
						pBss->WpaIE.IELen = pEid->Len + 2;
						NdisMoveMemory(pBss->WpaIE.IE, pEid, pBss->WpaIE.IELen);
					}
					break;
                case IE_RSN:
                    if (NdisEqualMemory(pEid->Octet + 2, RSN_OUI, 3))
					{
						if ((pEid->Len + 2) > MAX_CUSTOM_LEN)
                        {
							pBss->RsnIE.IELen = 0;
							break;
					}
						pBss->RsnIE.IELen = pEid->Len + 2;
						NdisMoveMemory(pBss->RsnIE.IE, pEid, pBss->RsnIE.IELen);
			}
				break;
#ifdef EXT_BUILD_CHANNEL_LIST
				case IE_COUNTRY:
					NdisMoveMemory(&pBss->CountryString[0], pEid->Octet, 3);
					pBss->bHasCountryIE = TRUE;
					break;
#endif // EXT_BUILD_CHANNEL_LIST //
            }
			Length = Length + 2 + (USHORT)pEid->Len;  // Eid[1] + Len[1]+ content[Len]
			pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len);
		}
	}
#endif // CONFIG_STA_SUPPORT //
}

/*!
 *	\brief insert an entry into the bss table
 *	\param p_tab The BSS table
 *	\param Bssid BSSID
 *	\param ssid SSID
 *	\param ssid_len Length of SSID
 *	\param bss_type
 *	\param beacon_period
 *	\param timestamp
 *	\param p_cf
 *	\param atim_win
 *	\param cap
 *	\param rates
 *	\param rates_len
 *	\param channel_idx
 *	\return none
 *	\pre
 *	\post
 *	\note If SSID is identical, the old entry will be replaced by the new one

 IRQL = DISPATCH_LEVEL

 */
ULONG BssTableSetEntry(
	IN	PRTMP_ADAPTER	pAd,
	OUT BSS_TABLE *Tab,
	IN PUCHAR pBssid,
	IN CHAR Ssid[],
	IN UCHAR SsidLen,
	IN UCHAR BssType,
	IN USHORT BeaconPeriod,
	IN CF_PARM *CfParm,
	IN USHORT AtimWin,
	IN USHORT CapabilityInfo,
	IN UCHAR SupRate[],
	IN UCHAR SupRateLen,
	IN UCHAR ExtRate[],
	IN UCHAR ExtRateLen,
	IN HT_CAPABILITY_IE *pHtCapability,
	IN ADD_HT_INFO_IE *pAddHtInfo,	// AP might use this additional ht info IE
	IN UCHAR			HtCapabilityLen,
	IN UCHAR			AddHtInfoLen,
	IN UCHAR			NewExtChanOffset,
	IN UCHAR ChannelNo,
	IN CHAR Rssi,
	IN LARGE_INTEGER TimeStamp,
	IN UCHAR CkipFlag,
	IN PEDCA_PARM pEdcaParm,
	IN PQOS_CAPABILITY_PARM pQosCapability,
	IN PQBSS_LOAD_PARM pQbssLoad,
	IN USHORT LengthVIE,
	IN PNDIS_802_11_VARIABLE_IEs pVIE)
{
	ULONG	Idx;

	Idx = BssTableSearchWithSSID(Tab, pBssid,  (UCHAR *)Ssid, SsidLen, ChannelNo);
	if (Idx == BSS_NOT_FOUND)
	{
		if (Tab->BssNr >= MAX_LEN_OF_BSS_TABLE)
	    {
			//
			// It may happen when BSS Table was full.
			// The desired AP will not be added into BSS Table
			// In this case, if we found the desired AP then overwrite BSS Table.
			//
			if(!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
			{
				if (MAC_ADDR_EQUAL(pAd->MlmeAux.Bssid, pBssid) ||
					SSID_EQUAL(pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen, Ssid, SsidLen))
				{
					Idx = Tab->BssOverlapNr;
					BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod, CfParm, AtimWin,
						CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen,
						NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE);
                    Tab->BssOverlapNr = (Tab->BssOverlapNr++) % MAX_LEN_OF_BSS_TABLE;
				}
				return Idx;
			}
			else
			{
			return BSS_NOT_FOUND;
			}
		}
		Idx = Tab->BssNr;
		BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod, CfParm, AtimWin,
					CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen,
					NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE);
		Tab->BssNr++;
	}
	else
	{
		/* avoid  Hidden SSID form beacon to overwirite correct SSID from probe response */
		if ((SSID_EQUAL(Ssid, SsidLen, Tab->BssEntry[Idx].Ssid, Tab->BssEntry[Idx].SsidLen)) ||
			(NdisEqualMemory(Tab->BssEntry[Idx].Ssid, ZeroSsid, Tab->BssEntry[Idx].SsidLen)))
		{
			BssEntrySet(pAd, &Tab->BssEntry[Idx], pBssid, Ssid, SsidLen, BssType, BeaconPeriod,CfParm, AtimWin,
						CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen,pHtCapability, pAddHtInfo,HtCapabilityLen, AddHtInfoLen,
						NewExtChanOffset, ChannelNo, Rssi, TimeStamp, CkipFlag, pEdcaParm, pQosCapability, pQbssLoad, LengthVIE, pVIE);
		}
	}

	return Idx;
}

#ifdef CONFIG_STA_SUPPORT
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
VOID  TriEventInit(
	IN	PRTMP_ADAPTER	pAd)
{
	UCHAR		i;

	for (i = 0;i < MAX_TRIGGER_EVENT;i++)
		pAd->CommonCfg.TriggerEventTab.EventA[i].bValid = FALSE;

	pAd->CommonCfg.TriggerEventTab.EventANo = 0;
	pAd->CommonCfg.TriggerEventTab.EventBCountDown = 0;
}

ULONG TriEventTableSetEntry(
	IN	PRTMP_ADAPTER	pAd,
	OUT TRIGGER_EVENT_TAB *Tab,
	IN PUCHAR pBssid,
	IN HT_CAPABILITY_IE *pHtCapability,
	IN UCHAR			HtCapabilityLen,
	IN UCHAR			RegClass,
	IN UCHAR ChannelNo)
{
	// Event A
	if (HtCapabilityLen == 0)
	{
		if (Tab->EventANo < MAX_TRIGGER_EVENT)
		{
			RTMPMoveMemory(Tab->EventA[Tab->EventANo].BSSID, pBssid, 6);
			Tab->EventA[Tab->EventANo].bValid = TRUE;
			Tab->EventA[Tab->EventANo].Channel = ChannelNo;
			Tab->EventA[Tab->EventANo].CDCounter = pAd->CommonCfg.Dot11BssWidthChanTranDelay;
			if (RegClass != 0)
			{
				// Beacon has Regulatory class IE. So use beacon's
				Tab->EventA[Tab->EventANo].RegClass = RegClass;
			}
			else
			{
				// Use Station's Regulatory class instead.
				if (pAd->StaActive.SupportedHtPhy.bHtEnable == TRUE)
				{
					if (pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel)
					{
						Tab->EventA[Tab->EventANo].RegClass = 32;
					}
					else if (pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel)
						Tab->EventA[Tab->EventANo].RegClass = 33;
				}
				else
					Tab->EventA[Tab->EventANo].RegClass = ??;

			}

			Tab->EventANo ++;
		}
	}
	else if (pHtCapability->HtCapInfo.Intolerant40)
	{
		Tab->EventBCountDown = pAd->CommonCfg.Dot11BssWidthChanTranDelay;
	}

}

/*
	========================================================================
	Routine Description:
		Trigger Event table Maintainence called once every second.

	Arguments:
	// IRQL = DISPATCH_LEVEL
	========================================================================
*/
VOID TriEventCounterMaintenance(
	IN	PRTMP_ADAPTER	pAd)
{
	UCHAR		i;
	BOOLEAN			bNotify = FALSE;
	for (i = 0;i < MAX_TRIGGER_EVENT;i++)
	{
		if (pAd->CommonCfg.TriggerEventTab.EventA[i].bValid && (pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter > 0))
		{
			pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter--;
			if (pAd->CommonCfg.TriggerEventTab.EventA[i].CDCounter == 0)
			{
				pAd->CommonCfg.TriggerEventTab.EventA[i].bValid = FALSE;
				pAd->CommonCfg.TriggerEventTab.EventANo --;
				// Need to send 20/40 Coexistence Notify frame if has status change.
				bNotify = TRUE;
			}
		}
	}
	if (pAd->CommonCfg.TriggerEventTab.EventBCountDown > 0)
	{
		pAd->CommonCfg.TriggerEventTab.EventBCountDown--;
		if (pAd->CommonCfg.TriggerEventTab.EventBCountDown == 0)
			bNotify = TRUE;
	}

	if (bNotify == TRUE)
		Update2040CoexistFrameAndNotify(pAd, BSSID_WCID, TRUE);
}
#endif // DOT11N_DRAFT3 //
#endif // DOT11_N_SUPPORT //

// IRQL = DISPATCH_LEVEL
VOID BssTableSsidSort(
	IN	PRTMP_ADAPTER	pAd,
	OUT BSS_TABLE *OutTab,
	IN	CHAR Ssid[],
	IN	UCHAR SsidLen)
{
	INT i;
	BssTableInit(OutTab);

	for (i = 0; i < pAd->ScanTab.BssNr; i++)
	{
		BSS_ENTRY *pInBss = &pAd->ScanTab.BssEntry[i];
		BOOLEAN	bIsHiddenApIncluded = FALSE;

		if (((pAd->CommonCfg.bIEEE80211H == 1) &&
            (pAd->MlmeAux.Channel > 14) &&
             RadarChannelCheck(pAd, pInBss->Channel))
#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
             || (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
#endif // CARRIER_DETECTION_SUPPORT //
            )
{
			if (pInBss->Hidden)
				bIsHiddenApIncluded = TRUE;
}

		if ((pInBss->BssType == pAd->StaCfg.BssType) &&
			(SSID_EQUAL(Ssid, SsidLen, pInBss->Ssid, pInBss->SsidLen) || bIsHiddenApIncluded))
		{
			BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];


#ifdef EXT_BUILD_CHANNEL_LIST
			// If no Country IE exists no Connection will be established when IEEE80211dClientMode is strict.
			if ((pAd->StaCfg.IEEE80211dClientMode == Rt802_11_D_Strict) &&
				(pInBss->bHasCountryIE == FALSE))
			{
				DBGPRINT(RT_DEBUG_TRACE,("StaCfg.IEEE80211dClientMode == Rt802_11_D_Strict, but this AP doesn't have country IE.\n"));
				continue;
			}
#endif // EXT_BUILD_CHANNEL_LIST //

#ifdef DOT11_N_SUPPORT
			// 2.4G/5G N only mode
			if ((pInBss->HtCapabilityLen == 0) &&
				((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)))
			{
				DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
				continue;
			}
#endif // DOT11_N_SUPPORT //

			// New for WPA2
			// Check the Authmode first
			if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
			{
				// Check AuthMode and AuthModeAux for matching, in case AP support dual-mode
				if ((pAd->StaCfg.AuthMode != pInBss->AuthMode) && (pAd->StaCfg.AuthMode != pInBss->AuthModeAux))
					// None matched
					continue;

				// Check cipher suite, AP must have more secured cipher than station setting
				if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
				{
					// If it's not mixed mode, we should only let BSS pass with the same encryption
					if (pInBss->WPA.bMixMode == FALSE)
						if (pAd->StaCfg.WepStatus != pInBss->WPA.GroupCipher)
							continue;

					// check group cipher
					if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) &&
						(pInBss->WPA.GroupCipher != Ndis802_11GroupWEP40Enabled) &&
						(pInBss->WPA.GroupCipher != Ndis802_11GroupWEP104Enabled))
						continue;

					// check pairwise cipher, skip if none matched
					// If profile set to AES, let it pass without question.
					// If profile set to TKIP, we must find one mateched
					if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) &&
						(pAd->StaCfg.WepStatus != pInBss->WPA.PairCipher) &&
						(pAd->StaCfg.WepStatus != pInBss->WPA.PairCipherAux))
						continue;
				}
				else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
				{
					// If it's not mixed mode, we should only let BSS pass with the same encryption
					if (pInBss->WPA2.bMixMode == FALSE)
						if (pAd->StaCfg.WepStatus != pInBss->WPA2.GroupCipher)
							continue;

					// check group cipher
					if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) &&
						(pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP40Enabled) &&
						(pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP104Enabled))
						continue;

					// check pairwise cipher, skip if none matched
					// If profile set to AES, let it pass without question.
					// If profile set to TKIP, we must find one mateched
					if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) &&
						(pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipher) &&
						(pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipherAux))
						continue;
				}
			}
			// Bss Type matched, SSID matched.
			// We will check wepstatus for qualification Bss
			else if (pAd->StaCfg.WepStatus != pInBss->WepStatus)
			{
				DBGPRINT(RT_DEBUG_TRACE,("StaCfg.WepStatus=%d, while pInBss->WepStatus=%d\n", pAd->StaCfg.WepStatus, pInBss->WepStatus));
				//
				// For the SESv2 case, we will not qualify WepStatus.
				//
				if (!pInBss->bSES)
					continue;
			}

			// Since the AP is using hidden SSID, and we are trying to connect to ANY
			// It definitely will fail. So, skip it.
			// CCX also require not even try to connect it!!
			if (SsidLen == 0)
				continue;

#ifdef DOT11_N_SUPPORT
			// If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
			// If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
			if ((pInBss->CentralChannel != pInBss->Channel) &&
				(pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40))
			{
				if (RTMPCheckChannel(pAd, pInBss->CentralChannel, pInBss->Channel) == FALSE)
				{
					pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20;
					SetCommonHT(pAd);
					pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40;
				}
				else
				{
					if (pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BAND_WIDTH_20)
					{
						SetCommonHT(pAd);
					}
				}
			}
#endif // DOT11_N_SUPPORT //

			// copy matching BSS from InTab to OutTab
			NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));

			OutTab->BssNr++;
		}
		else if ((pInBss->BssType == pAd->StaCfg.BssType) && (SsidLen == 0))
		{
			BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];


#ifdef DOT11_N_SUPPORT
			// 2.4G/5G N only mode
			if ((pInBss->HtCapabilityLen == 0) &&
				((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)))
			{
				DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
				continue;
			}
#endif // DOT11_N_SUPPORT //

			// New for WPA2
			// Check the Authmode first
			if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
			{
				// Check AuthMode and AuthModeAux for matching, in case AP support dual-mode
				if ((pAd->StaCfg.AuthMode != pInBss->AuthMode) && (pAd->StaCfg.AuthMode != pInBss->AuthModeAux))
					// None matched
					continue;

				// Check cipher suite, AP must have more secured cipher than station setting
				if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK))
				{
					// If it's not mixed mode, we should only let BSS pass with the same encryption
					if (pInBss->WPA.bMixMode == FALSE)
						if (pAd->StaCfg.WepStatus != pInBss->WPA.GroupCipher)
							continue;

					// check group cipher
					if (pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher)
						continue;

					// check pairwise cipher, skip if none matched
					// If profile set to AES, let it pass without question.
					// If profile set to TKIP, we must find one mateched
					if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) &&
						(pAd->StaCfg.WepStatus != pInBss->WPA.PairCipher) &&
						(pAd->StaCfg.WepStatus != pInBss->WPA.PairCipherAux))
						continue;
				}
				else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
				{
					// If it's not mixed mode, we should only let BSS pass with the same encryption
					if (pInBss->WPA2.bMixMode == FALSE)
						if (pAd->StaCfg.WepStatus != pInBss->WPA2.GroupCipher)
							continue;

					// check group cipher
					if (pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher)
						continue;

					// check pairwise cipher, skip if none matched
					// If profile set to AES, let it pass without question.
					// If profile set to TKIP, we must find one mateched
					if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) &&
						(pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipher) &&
						(pAd->StaCfg.WepStatus != pInBss->WPA2.PairCipherAux))
						continue;
				}
			}
			// Bss Type matched, SSID matched.
			// We will check wepstatus for qualification Bss
			else if (pAd->StaCfg.WepStatus != pInBss->WepStatus)
					continue;

#ifdef DOT11_N_SUPPORT
			// If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
			// If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
			if ((pInBss->CentralChannel != pInBss->Channel) &&
				(pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40))
			{
				if (RTMPCheckChannel(pAd, pInBss->CentralChannel, pInBss->Channel) == FALSE)
				{
					pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20;
					SetCommonHT(pAd);
					pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40;
				}
			}
#endif // DOT11_N_SUPPORT //

			// copy matching BSS from InTab to OutTab
			NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));

			OutTab->BssNr++;
		}

		if (OutTab->BssNr >= MAX_LEN_OF_BSS_TABLE)
			break;
	}

	BssTableSortByRssi(OutTab);
}


// IRQL = DISPATCH_LEVEL
VOID BssTableSortByRssi(
	IN OUT BSS_TABLE *OutTab)
{
	INT	  i, j;
	BSS_ENTRY TmpBss;

	for (i = 0; i < OutTab->BssNr - 1; i++)
	{
		for (j = i+1; j < OutTab->BssNr; j++)
		{
			if (OutTab->BssEntry[j].Rssi > OutTab->BssEntry[i].Rssi)
			{
				NdisMoveMemory(&TmpBss, &OutTab->BssEntry[j], sizeof(BSS_ENTRY));
				NdisMoveMemory(&OutTab->BssEntry[j], &OutTab->BssEntry[i], sizeof(BSS_ENTRY));
				NdisMoveMemory(&OutTab->BssEntry[i], &TmpBss, sizeof(BSS_ENTRY));
			}
		}
	}
}
#endif // CONFIG_STA_SUPPORT //


VOID BssCipherParse(
	IN OUT	PBSS_ENTRY	pBss)
{
	PEID_STRUCT		 pEid;
	PUCHAR				pTmp;
	PRSN_IE_HEADER_STRUCT			pRsnHeader;
	PCIPHER_SUITE_STRUCT			pCipher;
	PAKM_SUITE_STRUCT				pAKM;
	USHORT							Count;
	INT								Length;
	NDIS_802_11_ENCRYPTION_STATUS	TmpCipher;

	//
	// WepStatus will be reset later, if AP announce TKIP or AES on the beacon frame.
	//
	if (pBss->Privacy)
	{
		pBss->WepStatus		= Ndis802_11WEPEnabled;
	}
	else
	{
		pBss->WepStatus		= Ndis802_11WEPDisabled;
	}
	// Set default to disable & open authentication before parsing variable IE
	pBss->AuthMode		= Ndis802_11AuthModeOpen;
	pBss->AuthModeAux	= Ndis802_11AuthModeOpen;

	// Init WPA setting
	pBss->WPA.PairCipher	= Ndis802_11WEPDisabled;
	pBss->WPA.PairCipherAux = Ndis802_11WEPDisabled;
	pBss->WPA.GroupCipher	= Ndis802_11WEPDisabled;
	pBss->WPA.RsnCapability = 0;
	pBss->WPA.bMixMode		= FALSE;

	// Init WPA2 setting
	pBss->WPA2.PairCipher	 = Ndis802_11WEPDisabled;
	pBss->WPA2.PairCipherAux = Ndis802_11WEPDisabled;
	pBss->WPA2.GroupCipher	 = Ndis802_11WEPDisabled;
	pBss->WPA2.RsnCapability = 0;
	pBss->WPA2.bMixMode	 = FALSE;


	Length = (INT) pBss->VarIELen;

	while (Length > 0)
	{
		// Parse cipher suite base on WPA1 & WPA2, they should be parsed differently
		pTmp = ((PUCHAR) pBss->VarIEs) + pBss->VarIELen - Length;
		pEid = (PEID_STRUCT) pTmp;
		switch (pEid->Eid)
		{
			case IE_WPA:
				if (NdisEqualMemory(pEid->Octet, SES_OUI, 3) && (pEid->Len == 7))
				{
					pBss->bSES = TRUE;
					break;
				}
				else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4) != 1)
				{
					// if unsupported vendor specific IE
					break;
				}
				// Skip OUI, version, and multicast suite
				// This part should be improved in the future when AP supported multiple cipher suite.
				// For now, it's OK since almost all APs have fixed cipher suite supported.
				// pTmp = (PUCHAR) pEid->Octet;
				pTmp   += 11;

				// Cipher Suite Selectors from Spec P802.11i/D3.2 P26.
				//	Value	   Meaning
				//	0			None
				//	1			WEP-40
				//	2			Tkip
				//	3			WRAP
				//	4			AES
				//	5			WEP-104
				// Parse group cipher
				switch (*pTmp)
				{
					case 1:
						pBss->WPA.GroupCipher = Ndis802_11GroupWEP40Enabled;
						break;
					case 5:
						pBss->WPA.GroupCipher = Ndis802_11GroupWEP104Enabled;
						break;
					case 2:
						pBss->WPA.GroupCipher = Ndis802_11Encryption2Enabled;
						break;
					case 4:
						pBss->WPA.GroupCipher = Ndis802_11Encryption3Enabled;
						break;
					default:
						break;
				}
				// number of unicast suite
				pTmp   += 1;

				// skip all unicast cipher suites
				//Count = *(PUSHORT) pTmp;
				Count = (pTmp[1]<<8) + pTmp[0];
				pTmp   += sizeof(USHORT);

				// Parsing all unicast cipher suite
				while (Count > 0)
				{
					// Skip OUI
					pTmp += 3;
					TmpCipher = Ndis802_11WEPDisabled;
					switch (*pTmp)
					{
						case 1:
						case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway
							TmpCipher = Ndis802_11Encryption1Enabled;
							break;
						case 2:
							TmpCipher = Ndis802_11Encryption2Enabled;
							break;
						case 4:
							TmpCipher = Ndis802_11Encryption3Enabled;
							break;
						default:
							break;
					}
					if (TmpCipher > pBss->WPA.PairCipher)
					{
						// Move the lower cipher suite to PairCipherAux
						pBss->WPA.PairCipherAux = pBss->WPA.PairCipher;
						pBss->WPA.PairCipher	= TmpCipher;
					}
					else
					{
						pBss->WPA.PairCipherAux = TmpCipher;
					}
					pTmp++;
					Count--;
				}

				// 4. get AKM suite counts
				//Count	= *(PUSHORT) pTmp;
				Count = (pTmp[1]<<8) + pTmp[0];
				pTmp   += sizeof(USHORT);
				pTmp   += 3;

				switch (*pTmp)
				{
					case 1:
						// Set AP support WPA-enterprise mode
						if (pBss->AuthMode == Ndis802_11AuthModeOpen)
							pBss->AuthMode = Ndis802_11AuthModeWPA;
						else
							pBss->AuthModeAux = Ndis802_11AuthModeWPA;
						break;
					case 2:
						// Set AP support WPA-PSK mode
						if (pBss->AuthMode == Ndis802_11AuthModeOpen)
							pBss->AuthMode = Ndis802_11AuthModeWPAPSK;
						else
							pBss->AuthModeAux = Ndis802_11AuthModeWPAPSK;
						break;
					default:
						break;
				}
				pTmp   += 1;

				// Fixed for WPA-None
				if (pBss->BssType == BSS_ADHOC)
				{
					pBss->AuthMode	  = Ndis802_11AuthModeWPANone;
					pBss->AuthModeAux = Ndis802_11AuthModeWPANone;
					pBss->WepStatus   = pBss->WPA.GroupCipher;
					// Patched bugs for old driver
					if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled)
						pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher;
				}
				else
					pBss->WepStatus   = pBss->WPA.PairCipher;

				// Check the Pair & Group, if different, turn on mixed mode flag
				if (pBss->WPA.GroupCipher != pBss->WPA.PairCipher)
					pBss->WPA.bMixMode = TRUE;

				break;

			case IE_RSN:
				pRsnHeader = (PRSN_IE_HEADER_STRUCT) pTmp;

				// 0. Version must be 1
				if (le2cpu16(pRsnHeader->Version) != 1)
					break;
				pTmp   += sizeof(RSN_IE_HEADER_STRUCT);

				// 1. Check group cipher
				pCipher = (PCIPHER_SUITE_STRUCT) pTmp;
				if (!RTMPEqualMemory(pTmp, RSN_OUI, 3))
					break;

				// Parse group cipher
				switch (pCipher->Type)
				{
					case 1:
						pBss->WPA2.GroupCipher = Ndis802_11GroupWEP40Enabled;
						break;
					case 5:
						pBss->WPA2.GroupCipher = Ndis802_11GroupWEP104Enabled;
						break;
					case 2:
						pBss->WPA2.GroupCipher = Ndis802_11Encryption2Enabled;
						break;
					case 4:
						pBss->WPA2.GroupCipher = Ndis802_11Encryption3Enabled;
						break;
					default:
						break;
				}
				// set to correct offset for next parsing
				pTmp   += sizeof(CIPHER_SUITE_STRUCT);

				// 2. Get pairwise cipher counts
				//Count = *(PUSHORT) pTmp;
				Count = (pTmp[1]<<8) + pTmp[0];
				pTmp   += sizeof(USHORT);

				// 3. Get pairwise cipher
				// Parsing all unicast cipher suite
				while (Count > 0)
				{
					// Skip OUI
					pCipher = (PCIPHER_SUITE_STRUCT) pTmp;
					TmpCipher = Ndis802_11WEPDisabled;
					switch (pCipher->Type)
					{
						case 1:
						case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway
							TmpCipher = Ndis802_11Encryption1Enabled;
							break;
						case 2:
							TmpCipher = Ndis802_11Encryption2Enabled;
							break;
						case 4:
							TmpCipher = Ndis802_11Encryption3Enabled;
							break;
						default:
							break;
					}
					if (TmpCipher > pBss->WPA2.PairCipher)
					{
						// Move the lower cipher suite to PairCipherAux
						pBss->WPA2.PairCipherAux = pBss->WPA2.PairCipher;
						pBss->WPA2.PairCipher	 = TmpCipher;
					}
					else
					{
						pBss->WPA2.PairCipherAux = TmpCipher;
					}
					pTmp += sizeof(CIPHER_SUITE_STRUCT);
					Count--;
				}

				// 4. get AKM suite counts
				//Count	= *(PUSHORT) pTmp;
				Count = (pTmp[1]<<8) + pTmp[0];
				pTmp   += sizeof(USHORT);

				// 5. Get AKM ciphers
				// Parsing all AKM ciphers
				while (Count > 0)
				{
					pAKM = (PAKM_SUITE_STRUCT) pTmp;
					if (!RTMPEqualMemory(pTmp, RSN_OUI, 3))
						break;

					switch (pAKM->Type)
					{
						case 1:
							// Set AP support WPA-enterprise mode
							if (pBss->AuthMode == Ndis802_11AuthModeOpen)
								pBss->AuthMode = Ndis802_11AuthModeWPA2;
							else
								pBss->AuthModeAux = Ndis802_11AuthModeWPA2;
							break;
						case 2:
							// Set AP support WPA-PSK mode
							if (pBss->AuthMode == Ndis802_11AuthModeOpen)
								pBss->AuthMode = Ndis802_11AuthModeWPA2PSK;
							else
								pBss->AuthModeAux = Ndis802_11AuthModeWPA2PSK;
							break;
						default:
							if (pBss->AuthMode == Ndis802_11AuthModeOpen)
								pBss->AuthMode = Ndis802_11AuthModeMax;
							else
								pBss->AuthModeAux = Ndis802_11AuthModeMax;
							break;
					}
					pTmp   += (Count * sizeof(AKM_SUITE_STRUCT));
					Count--;
				}

				// Fixed for WPA-None
				if (pBss->BssType == BSS_ADHOC)
				{
					pBss->AuthMode = Ndis802_11AuthModeWPANone;
					pBss->AuthModeAux = Ndis802_11AuthModeWPANone;
					pBss->WPA.PairCipherAux = pBss->WPA2.PairCipherAux;
					pBss->WPA.GroupCipher	= pBss->WPA2.GroupCipher;
					pBss->WepStatus			= pBss->WPA.GroupCipher;
					// Patched bugs for old driver
					if (pBss->WPA.PairCipherAux == Ndis802_11WEPDisabled)
						pBss->WPA.PairCipherAux = pBss->WPA.GroupCipher;
				}
				pBss->WepStatus   = pBss->WPA2.PairCipher;

				// 6. Get RSN capability
				//pBss->WPA2.RsnCapability = *(PUSHORT) pTmp;
				pBss->WPA2.RsnCapability = (pTmp[1]<<8) + pTmp[0];
				pTmp += sizeof(USHORT);

				// Check the Pair & Group, if different, turn on mixed mode flag
				if (pBss->WPA2.GroupCipher != pBss->WPA2.PairCipher)
					pBss->WPA2.bMixMode = TRUE;

				break;
			default:
				break;
		}
		Length -= (pEid->Len + 2);
	}
}

// ===========================================================================================
// mac_table.c
// ===========================================================================================

/*! \brief generates a random mac address value for IBSS BSSID
 *	\param Addr the bssid location
 *	\return none
 *	\pre
 *	\post
 */
VOID MacAddrRandomBssid(
	IN PRTMP_ADAPTER pAd,
	OUT PUCHAR pAddr)
{
	INT i;

	for (i = 0; i < MAC_ADDR_LEN; i++)
	{
		pAddr[i] = RandomByte(pAd);
	}

	pAddr[0] = (pAddr[0] & 0xfe) | 0x02;  // the first 2 bits must be 01xxxxxxxx
}

/*! \brief init the management mac frame header
 *	\param p_hdr mac header
 *	\param subtype subtype of the frame
 *	\param p_ds destination address, don't care if it is a broadcast address
 *	\return none
 *	\pre the station has the following information in the pAd->StaCfg
 *	 - bssid
 *	 - station address
 *	\post
 *	\note this function initializes the following field

 IRQL = PASSIVE_LEVEL
 IRQL = DISPATCH_LEVEL

 */
VOID MgtMacHeaderInit(
	IN	PRTMP_ADAPTER	pAd,
	IN OUT PHEADER_802_11 pHdr80211,
	IN UCHAR SubType,
	IN UCHAR ToDs,
	IN PUCHAR pDA,
	IN PUCHAR pBssid)
{
	NdisZeroMemory(pHdr80211, sizeof(HEADER_802_11));

	pHdr80211->FC.Type = BTYPE_MGMT;
	pHdr80211->FC.SubType = SubType;
//	if (SubType == SUBTYPE_ACK)	// sample, no use, it will conflict with ACTION frame sub type
//		pHdr80211->FC.Type = BTYPE_CNTL;
	pHdr80211->FC.ToDs = ToDs;
	COPY_MAC_ADDR(pHdr80211->Addr1, pDA);
#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
#endif // CONFIG_STA_SUPPORT //
	COPY_MAC_ADDR(pHdr80211->Addr3, pBssid);
}

// ===========================================================================================
// mem_mgmt.c
// ===========================================================================================

/*!***************************************************************************
 * This routine build an outgoing frame, and fill all information specified
 * in argument list to the frame body. The actual frame size is the summation
 * of all arguments.
 * input params:
 *		Buffer - pointer to a pre-allocated memory segment
 *		args - a list of <int arg_size, arg> pairs.
 *		NOTE NOTE NOTE!!!! the last argument must be NULL, otherwise this
 *						   function will FAIL!!!
 * return:
 *		Size of the buffer
 * usage:
 *		MakeOutgoingFrame(Buffer, output_length, 2, &fc, 2, &dur, 6, p_addr1, 6,p_addr2, END_OF_ARGS);

 IRQL = PASSIVE_LEVEL
 IRQL = DISPATCH_LEVEL

 ****************************************************************************/
ULONG MakeOutgoingFrame(
	OUT UCHAR *Buffer,
	OUT ULONG *FrameLen, ...)
{
	UCHAR   *p;
	int	leng;
	ULONG	TotLeng;
	va_list Args;

	// calculates the total length
	TotLeng = 0;
	va_start(Args, FrameLen);
	do
	{
		leng = va_arg(Args, int);
		if (leng == END_OF_ARGS)
		{
			break;
		}
		p = va_arg(Args, PVOID);
		NdisMoveMemory(&Buffer[TotLeng], p, leng);
		TotLeng = TotLeng + leng;
	} while(TRUE);

	va_end(Args); /* clean up */
	*FrameLen = TotLeng;
	return TotLeng;
}

// ===========================================================================================
// mlme_queue.c
// ===========================================================================================

/*! \brief	Initialize The MLME Queue, used by MLME Functions
 *	\param	*Queue	   The MLME Queue
 *	\return Always	   Return NDIS_STATE_SUCCESS in this implementation
 *	\pre
 *	\post
 *	\note	Because this is done only once (at the init stage), no need to be locked

 IRQL = PASSIVE_LEVEL

 */
NDIS_STATUS MlmeQueueInit(
	IN MLME_QUEUE *Queue)
{
	INT i;

	NdisAllocateSpinLock(&Queue->Lock);

	Queue->Num	= 0;
	Queue->Head = 0;
	Queue->Tail = 0;

	for (i = 0; i < MAX_LEN_OF_MLME_QUEUE; i++)
	{
		Queue->Entry[i].Occupied = FALSE;
		Queue->Entry[i].MsgLen = 0;
		NdisZeroMemory(Queue->Entry[i].Msg, MGMT_DMA_BUFFER_SIZE);
	}

	return NDIS_STATUS_SUCCESS;
}

/*! \brief	 Enqueue a message for other threads, if they want to send messages to MLME thread
 *	\param	*Queue	  The MLME Queue
 *	\param	 Machine  The State Machine Id
 *	\param	 MsgType  The Message Type
 *	\param	 MsgLen   The Message length
 *	\param	*Msg	  The message pointer
 *	\return  TRUE if enqueue is successful, FALSE if the queue is full
 *	\pre
 *	\post
 *	\note	 The message has to be initialized

 IRQL = PASSIVE_LEVEL
 IRQL = DISPATCH_LEVEL

 */
BOOLEAN MlmeEnqueue(
	IN	PRTMP_ADAPTER	pAd,
	IN ULONG Machine,
	IN ULONG MsgType,
	IN ULONG MsgLen,
	IN VOID *Msg)
{
	INT Tail;
	MLME_QUEUE	*Queue = (MLME_QUEUE *)&pAd->Mlme.Queue;

	// Do nothing if the driver is starting halt state.
	// This might happen when timer already been fired before cancel timer with mlmehalt
	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
		return FALSE;

	// First check the size, it MUST not exceed the mlme queue size
	if (MsgLen > MGMT_DMA_BUFFER_SIZE)
	{
		DBGPRINT_ERR(("MlmeEnqueue: msg too large, size = %ld \n", MsgLen));
		return FALSE;
	}

	if (MlmeQueueFull(Queue))
	{
		return FALSE;
	}

	NdisAcquireSpinLock(&(Queue->Lock));
	Tail = Queue->Tail;
	Queue->Tail++;
	Queue->Num++;
	if (Queue->Tail == MAX_LEN_OF_MLME_QUEUE)
	{
		Queue->Tail = 0;
	}

	Queue->Entry[Tail].Wcid = RESERVED_WCID;
	Queue->Entry[Tail].Occupied = TRUE;
	Queue->Entry[Tail].Machine = Machine;
	Queue->Entry[Tail].MsgType = MsgType;
	Queue->Entry[Tail].MsgLen  = MsgLen;

	if (Msg != NULL)
	{
		NdisMoveMemory(Queue->Entry[Tail].Msg, Msg, MsgLen);
	}

	NdisReleaseSpinLock(&(Queue->Lock));
	return TRUE;
}

/*! \brief	 This function is used when Recv gets a MLME message
 *	\param	*Queue			 The MLME Queue
 *	\param	 TimeStampHigh	 The upper 32 bit of timestamp
 *	\param	 TimeStampLow	 The lower 32 bit of timestamp
 *	\param	 Rssi			 The receiving RSSI strength
 *	\param	 MsgLen			 The length of the message
 *	\param	*Msg			 The message pointer
 *	\return  TRUE if everything ok, FALSE otherwise (like Queue Full)
 *	\pre
 *	\post

 IRQL = DISPATCH_LEVEL

 */
BOOLEAN MlmeEnqueueForRecv(
	IN	PRTMP_ADAPTER	pAd,
	IN ULONG Wcid,
	IN ULONG TimeStampHigh,
	IN ULONG TimeStampLow,
	IN UCHAR Rssi0,
	IN UCHAR Rssi1,
	IN UCHAR Rssi2,
	IN ULONG MsgLen,
	IN VOID *Msg,
	IN UCHAR Signal)
{
	INT		 Tail, Machine;
	PFRAME_802_11 pFrame = (PFRAME_802_11)Msg;
	INT		 MsgType;
	MLME_QUEUE	*Queue = (MLME_QUEUE *)&pAd->Mlme.Queue;

#ifdef RALINK_ATE
	/* Nothing to do in ATE mode */
	if(ATE_ON(pAd))
		return FALSE;
#endif // RALINK_ATE //

	// Do nothing if the driver is starting halt state.
	// This might happen when timer already been fired before cancel timer with mlmehalt
	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
	{
		DBGPRINT_ERR(("MlmeEnqueueForRecv: fRTMP_ADAPTER_HALT_IN_PROGRESS\n"));
		return FALSE;
	}

	// First check the size, it MUST not exceed the mlme queue size
	if (MsgLen > MGMT_DMA_BUFFER_SIZE)
	{
		DBGPRINT_ERR(("MlmeEnqueueForRecv: frame too large, size = %ld \n", MsgLen));
		return FALSE;
	}

	if (MlmeQueueFull(Queue))
	{
		return FALSE;
	}

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		if (!MsgTypeSubst(pAd, pFrame, &Machine, &MsgType))
		{
			DBGPRINT_ERR(("MlmeEnqueueForRecv: un-recongnized mgmt->subtype=%d\n",pFrame->Hdr.FC.SubType));
			return FALSE;
		}
	}
#endif // CONFIG_STA_SUPPORT //

	// OK, we got all the informations, it is time to put things into queue
	NdisAcquireSpinLock(&(Queue->Lock));
	Tail = Queue->Tail;
	Queue->Tail++;
	Queue->Num++;
	if (Queue->Tail == MAX_LEN_OF_MLME_QUEUE)
	{
		Queue->Tail = 0;
	}
	Queue->Entry[Tail].Occupied = TRUE;
	Queue->Entry[Tail].Machine = Machine;
	Queue->Entry[Tail].MsgType = MsgType;
	Queue->Entry[Tail].MsgLen  = MsgLen;
	Queue->Entry[Tail].TimeStamp.u.LowPart = TimeStampLow;
	Queue->Entry[Tail].TimeStamp.u.HighPart = TimeStampHigh;
	Queue->Entry[Tail].Rssi0 = Rssi0;
	Queue->Entry[Tail].Rssi1 = Rssi1;
	Queue->Entry[Tail].Rssi2 = Rssi2;
	Queue->Entry[Tail].Signal = Signal;
	Queue->Entry[Tail].Wcid = (UCHAR)Wcid;

	Queue->Entry[Tail].Channel = pAd->LatchRfRegs.Channel;

	if (Msg != NULL)
	{
		NdisMoveMemory(Queue->Entry[Tail].Msg, Msg, MsgLen);
	}

	NdisReleaseSpinLock(&(Queue->Lock));

	RTMP_MLME_HANDLER(pAd);

	return TRUE;
}


/*! \brief	 Dequeue a message from the MLME Queue
 *	\param	*Queue	  The MLME Queue
 *	\param	*Elem	  The message dequeued from MLME Queue
 *	\return  TRUE if the Elem contains something, FALSE otherwise
 *	\pre
 *	\post

 IRQL = DISPATCH_LEVEL

 */
BOOLEAN MlmeDequeue(
	IN MLME_QUEUE *Queue,
	OUT MLME_QUEUE_ELEM **Elem)
{
	NdisAcquireSpinLock(&(Queue->Lock));
	*Elem = &(Queue->Entry[Queue->Head]);
	Queue->Num--;
	Queue->Head++;
	if (Queue->Head == MAX_LEN_OF_MLME_QUEUE)
	{
		Queue->Head = 0;
	}
	NdisReleaseSpinLock(&(Queue->Lock));
	return TRUE;
}

// IRQL = DISPATCH_LEVEL
VOID	MlmeRestartStateMachine(
	IN	PRTMP_ADAPTER	pAd)
{
#ifdef RTMP_MAC_PCI
	MLME_QUEUE_ELEM		*Elem = NULL;
#endif // RTMP_MAC_PCI //
#ifdef CONFIG_STA_SUPPORT
	BOOLEAN				Cancelled;
#endif // CONFIG_STA_SUPPORT //

	DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n"));

#ifdef RTMP_MAC_PCI
	NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
	if(pAd->Mlme.bRunning)
	{
		NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
		return;
	}
	else
	{
		pAd->Mlme.bRunning = TRUE;
	}
	NdisReleaseSpinLock(&pAd->Mlme.TaskLock);

	// Remove all Mlme queues elements
	while (!MlmeQueueEmpty(&pAd->Mlme.Queue))
	{
		//From message type, determine which state machine I should drive
		if (MlmeDequeue(&pAd->Mlme.Queue, &Elem))
		{
			// free MLME element
			Elem->Occupied = FALSE;
			Elem->MsgLen = 0;

		}
		else {
			DBGPRINT_ERR(("MlmeRestartStateMachine: MlmeQueue empty\n"));
		}
	}
#endif // RTMP_MAC_PCI //

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
#ifdef QOS_DLS_SUPPORT
		UCHAR i;
#endif // QOS_DLS_SUPPORT //
		// Cancel all timer events
		// Be careful to cancel new added timer
		RTMPCancelTimer(&pAd->MlmeAux.AssocTimer,	  &Cancelled);
		RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer,   &Cancelled);
		RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer,  &Cancelled);
		RTMPCancelTimer(&pAd->MlmeAux.AuthTimer,	   &Cancelled);
		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,	   &Cancelled);
		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,	   &Cancelled);

#ifdef QOS_DLS_SUPPORT
		for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
		{
			RTMPCancelTimer(&pAd->StaCfg.DLSEntry[i].Timer, &Cancelled);
		}
#endif // QOS_DLS_SUPPORT //
	}
#endif // CONFIG_STA_SUPPORT //

	// Change back to original channel in case of doing scan
	AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
	AsicLockChannel(pAd, pAd->CommonCfg.Channel);

	// Resume MSDU which is turned off durning scan
	RTMPResumeMsduTransmission(pAd);

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		// Set all state machines back IDLE
		pAd->Mlme.CntlMachine.CurrState    = CNTL_IDLE;
		pAd->Mlme.AssocMachine.CurrState   = ASSOC_IDLE;
		pAd->Mlme.AuthMachine.CurrState    = AUTH_REQ_IDLE;
		pAd->Mlme.AuthRspMachine.CurrState = AUTH_RSP_IDLE;
		pAd->Mlme.SyncMachine.CurrState    = SYNC_IDLE;
		pAd->Mlme.ActMachine.CurrState    = ACT_IDLE;
#ifdef QOS_DLS_SUPPORT
		pAd->Mlme.DlsMachine.CurrState    = DLS_IDLE;
#endif // QOS_DLS_SUPPORT //
	}
#endif // CONFIG_STA_SUPPORT //

#ifdef RTMP_MAC_PCI
	// Remove running state
	NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
	pAd->Mlme.bRunning = FALSE;
	NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
#endif // RTMP_MAC_PCI //
}

/*! \brief	test if the MLME Queue is empty
 *	\param	*Queue	  The MLME Queue
 *	\return TRUE if the Queue is empty, FALSE otherwise
 *	\pre
 *	\post

 IRQL = DISPATCH_LEVEL

 */
BOOLEAN MlmeQueueEmpty(
	IN MLME_QUEUE *Queue)
{
	BOOLEAN Ans;

	NdisAcquireSpinLock(&(Queue->Lock));
	Ans = (Queue->Num == 0);
	NdisReleaseSpinLock(&(Queue->Lock));

	return Ans;
}

/*! \brief	 test if the MLME Queue is full
 *	\param	 *Queue		 The MLME Queue
 *	\return  TRUE if the Queue is empty, FALSE otherwise
 *	\pre
 *	\post

 IRQL = PASSIVE_LEVEL
 IRQL = DISPATCH_LEVEL

 */
BOOLEAN MlmeQueueFull(
	IN MLME_QUEUE *Queue)
{
	BOOLEAN Ans;

	NdisAcquireSpinLock(&(Queue->Lock));
	Ans = (Queue->Num == MAX_LEN_OF_MLME_QUEUE || Queue->Entry[Queue->Tail].Occupied);
	NdisReleaseSpinLock(&(Queue->Lock));

	return Ans;
}

/*! \brief	 The destructor of MLME Queue
 *	\param
 *	\return
 *	\pre
 *	\post
 *	\note	Clear Mlme Queue, Set Queue->Num to Zero.

 IRQL = PASSIVE_LEVEL

 */
VOID MlmeQueueDestroy(
	IN MLME_QUEUE *pQueue)
{
	NdisAcquireSpinLock(&(pQueue->Lock));
	pQueue->Num  = 0;
	pQueue->Head = 0;
	pQueue->Tail = 0;
	NdisReleaseSpinLock(&(pQueue->Lock));
	NdisFreeSpinLock(&(pQueue->Lock));
}


/*! \brief	 To substitute the message type if the message is coming from external
 *	\param	pFrame		   The frame received
 *	\param	*Machine	   The state machine
 *	\param	*MsgType	   the message type for the state machine
 *	\return TRUE if the substitution is successful, FALSE otherwise
 *	\pre
 *	\post

 IRQL = DISPATCH_LEVEL

 */
#ifdef CONFIG_STA_SUPPORT
BOOLEAN MsgTypeSubst(
	IN PRTMP_ADAPTER  pAd,
	IN PFRAME_802_11 pFrame,
	OUT INT *Machine,
	OUT INT *MsgType)
{
	USHORT	Seq, Alg;
	UCHAR	EAPType;
	PUCHAR	pData;

	// Pointer to start of data frames including SNAP header
	pData = (PUCHAR) pFrame + LENGTH_802_11;

	// The only data type will pass to this function is EAPOL frame
	if (pFrame->Hdr.FC.Type == BTYPE_DATA)
	{
		{
	        *Machine = WPA_STATE_MACHINE;
			EAPType = *((UCHAR*)pFrame + LENGTH_802_11 + LENGTH_802_1_H + 1);
	        return (WpaMsgTypeSubst(EAPType, (INT *) MsgType));
		}
	}

	switch (pFrame->Hdr.FC.SubType)
	{
		case SUBTYPE_ASSOC_REQ:
			*Machine = ASSOC_STATE_MACHINE;
			*MsgType = MT2_PEER_ASSOC_REQ;
			break;
		case SUBTYPE_ASSOC_RSP:
			*Machine = ASSOC_STATE_MACHINE;
			*MsgType = MT2_PEER_ASSOC_RSP;
			break;
		case SUBTYPE_REASSOC_REQ:
			*Machine = ASSOC_STATE_MACHINE;
			*MsgType = MT2_PEER_REASSOC_REQ;
			break;
		case SUBTYPE_REASSOC_RSP:
			*Machine = ASSOC_STATE_MACHINE;
			*MsgType = MT2_PEER_REASSOC_RSP;
			break;
		case SUBTYPE_PROBE_REQ:
			*Machine = SYNC_STATE_MACHINE;
			*MsgType = MT2_PEER_PROBE_REQ;
			break;
		case SUBTYPE_PROBE_RSP:
			*Machine = SYNC_STATE_MACHINE;
			*MsgType = MT2_PEER_PROBE_RSP;
			break;
		case SUBTYPE_BEACON:
			*Machine = SYNC_STATE_MACHINE;
			*MsgType = MT2_PEER_BEACON;
			break;
		case SUBTYPE_ATIM:
			*Machine = SYNC_STATE_MACHINE;
			*MsgType = MT2_PEER_ATIM;
			break;
		case SUBTYPE_DISASSOC:
			*Machine = ASSOC_STATE_MACHINE;
			*MsgType = MT2_PEER_DISASSOC_REQ;
			break;
		case SUBTYPE_AUTH:
			// get the sequence number from payload 24 Mac Header + 2 bytes algorithm
			NdisMoveMemory(&Seq, &pFrame->Octet[2], sizeof(USHORT));
			NdisMoveMemory(&Alg, &pFrame->Octet[0], sizeof(USHORT));
			if (Seq == 1 || Seq == 3)
			{
				*Machine = AUTH_RSP_STATE_MACHINE;
				*MsgType = MT2_PEER_AUTH_ODD;
			}
			else if (Seq == 2 || Seq == 4)
			{
				if (Alg == AUTH_MODE_OPEN || Alg == AUTH_MODE_KEY)
				{
					*Machine = AUTH_STATE_MACHINE;
					*MsgType = MT2_PEER_AUTH_EVEN;
				}
			}
			else
			{
				return FALSE;
			}
			break;
		case SUBTYPE_DEAUTH:
			*Machine = AUTH_RSP_STATE_MACHINE;
			*MsgType = MT2_PEER_DEAUTH;
			break;
		case SUBTYPE_ACTION:
			*Machine = ACTION_STATE_MACHINE;
			//  Sometimes Sta will return with category bytes with MSB = 1, if they receive catogory out of their support
			if ((pFrame->Octet[0]&0x7F) > MAX_PEER_CATE_MSG)
			{
				*MsgType = MT2_ACT_INVALID;
			}
			else
			{
				*MsgType = (pFrame->Octet[0]&0x7F);
			}
			break;
		default:
			return FALSE;
			break;
	}

	return TRUE;
}
#endif // CONFIG_STA_SUPPORT //

// ===========================================================================================
// state_machine.c
// ===========================================================================================

/*! \brief Initialize the state machine.
 *	\param *S			pointer to the state machine
 *	\param	Trans		State machine transition function
 *	\param	StNr		number of states
 *	\param	MsgNr		number of messages
 *	\param	DefFunc		default function, when there is invalid state/message combination
 *	\param	InitState	initial state of the state machine
 *	\param	Base		StateMachine base, internal use only
 *	\pre p_sm should be a legal pointer
 *	\post

 IRQL = PASSIVE_LEVEL

 */
VOID StateMachineInit(
	IN STATE_MACHINE *S,
	IN STATE_MACHINE_FUNC Trans[],
	IN ULONG StNr,
	IN ULONG MsgNr,
	IN STATE_MACHINE_FUNC DefFunc,
	IN ULONG InitState,
	IN ULONG Base)
{
	ULONG i, j;

	// set number of states and messages
	S->NrState = StNr;
	S->NrMsg   = MsgNr;
	S->Base    = Base;

	S->TransFunc  = Trans;

	// init all state transition to default function
	for (i = 0; i < StNr; i++)
	{
		for (j = 0; j < MsgNr; j++)
		{
			S->TransFunc[i * MsgNr + j] = DefFunc;
		}
	}

	// set the starting state
	S->CurrState = InitState;
}

/*! \brief This function fills in the function pointer into the cell in the state machine
 *	\param *S	pointer to the state machine
 *	\param St	state
 *	\param Msg	incoming message
 *	\param f	the function to be executed when (state, message) combination occurs at the state machine
 *	\pre *S should be a legal pointer to the state machine, st, msg, should be all within the range, Base should be set in the initial state
 *	\post

 IRQL = PASSIVE_LEVEL

 */
VOID StateMachineSetAction(
	IN STATE_MACHINE *S,
	IN ULONG St,
	IN ULONG Msg,
	IN STATE_MACHINE_FUNC Func)
{
	ULONG MsgIdx;

	MsgIdx = Msg - S->Base;

	if (St < S->NrState && MsgIdx < S->NrMsg)
	{
		// boundary checking before setting the action
		S->TransFunc[St * S->NrMsg + MsgIdx] = Func;
	}
}

/*! \brief	 This function does the state transition
 *	\param	 *Adapter the NIC adapter pointer
 *	\param	 *S	  the state machine
 *	\param	 *Elem	  the message to be executed
 *	\return   None

 IRQL = DISPATCH_LEVEL

 */
VOID StateMachinePerformAction(
	IN	PRTMP_ADAPTER	pAd,
	IN STATE_MACHINE *S,
	IN MLME_QUEUE_ELEM *Elem)
{
	(*(S->TransFunc[S->CurrState * S->NrMsg + Elem->MsgType - S->Base]))(pAd, Elem);
}

/*
	==========================================================================
	Description:
		The drop function, when machine executes this, the message is simply
		ignored. This function does nothing, the message is freed in
		StateMachinePerformAction()
	==========================================================================
 */
VOID Drop(
	IN PRTMP_ADAPTER pAd,
	IN MLME_QUEUE_ELEM *Elem)
{
}

// ===========================================================================================
// lfsr.c
// ===========================================================================================

/*
	==========================================================================
	Description:

	IRQL = PASSIVE_LEVEL

	==========================================================================
 */
VOID LfsrInit(
	IN PRTMP_ADAPTER pAd,
	IN ULONG Seed)
{
	if (Seed == 0)
		pAd->Mlme.ShiftReg = 1;
	else
		pAd->Mlme.ShiftReg = Seed;
}

/*
	==========================================================================
	Description:
	==========================================================================
 */
UCHAR RandomByte(
	IN PRTMP_ADAPTER pAd)
{
	ULONG i;
	UCHAR R, Result;

	R = 0;

	if (pAd->Mlme.ShiftReg == 0)
	NdisGetSystemUpTime((ULONG *)&pAd->Mlme.ShiftReg);

	for (i = 0; i < 8; i++)
	{
		if (pAd->Mlme.ShiftReg & 0x00000001)
		{
			pAd->Mlme.ShiftReg = ((pAd->Mlme.ShiftReg ^ LFSR_MASK) >> 1) | 0x80000000;
			Result = 1;
		}
		else
		{
			pAd->Mlme.ShiftReg = pAd->Mlme.ShiftReg >> 1;
			Result = 0;
		}
		R = (R << 1) | Result;
	}

	return R;
}


/*
	========================================================================

	Routine Description:
		Verify the support rate for different PHY type

	Arguments:
		pAd				Pointer to our adapter

	Return Value:
		None

	IRQL = PASSIVE_LEVEL

	========================================================================
*/
VOID	RTMPCheckRates(
	IN		PRTMP_ADAPTER	pAd,
	IN OUT	UCHAR			SupRate[],
	IN OUT	UCHAR			*SupRateLen)
{
	UCHAR	RateIdx, i, j;
	UCHAR	NewRate[12], NewRateLen;

	NewRateLen = 0;

	if (pAd->CommonCfg.PhyMode == PHY_11B)
		RateIdx = 4;
	else
		RateIdx = 12;

	// Check for support rates exclude basic rate bit
	for (i = 0; i < *SupRateLen; i++)
		for (j = 0; j < RateIdx; j++)
			if ((SupRate[i] & 0x7f) == RateIdTo500Kbps[j])
				NewRate[NewRateLen++] = SupRate[i];

	*SupRateLen = NewRateLen;
	NdisMoveMemory(SupRate, NewRate, NewRateLen);
}

#ifdef CONFIG_STA_SUPPORT
#ifdef DOT11_N_SUPPORT
BOOLEAN RTMPCheckChannel(
	IN PRTMP_ADAPTER pAd,
	IN UCHAR		CentralChannel,
	IN UCHAR		Channel)
{
	UCHAR		k;
	UCHAR		UpperChannel = 0, LowerChannel = 0;
	UCHAR		NoEffectChannelinList = 0;

	// Find upper and lower channel according to 40MHz current operation.
	if (CentralChannel < Channel)
	{
		UpperChannel = Channel;
		if (CentralChannel > 2)
			LowerChannel = CentralChannel - 2;
		else
			return FALSE;
	}
	else if (CentralChannel > Channel)
	{
		UpperChannel = CentralChannel + 2;
		LowerChannel = Channel;
	}

	for (k = 0;k < pAd->ChannelListNum;k++)
	{
		if (pAd->ChannelList[k].Channel == UpperChannel)
		{
			NoEffectChannelinList ++;
		}
		if (pAd->ChannelList[k].Channel == LowerChannel)
		{
			NoEffectChannelinList ++;
		}
	}

	DBGPRINT(RT_DEBUG_TRACE,("Total Channel in Channel List = [%d]\n", NoEffectChannelinList));
	if (NoEffectChannelinList == 2)
		return TRUE;
	else
		return FALSE;
}

/*
	========================================================================

	Routine Description:
		Verify the support rate for HT phy type

	Arguments:
		pAd				Pointer to our adapter

	Return Value:
		FALSE if pAd->CommonCfg.SupportedHtPhy doesn't accept the pHtCapability.  (AP Mode)

	IRQL = PASSIVE_LEVEL

	========================================================================
*/
BOOLEAN		RTMPCheckHt(
	IN	PRTMP_ADAPTER			pAd,
	IN	UCHAR					Wcid,
	IN	HT_CAPABILITY_IE		*pHtCapability,
	IN	ADD_HT_INFO_IE			*pAddHtInfo)
{
	if (Wcid >= MAX_LEN_OF_MAC_TABLE)
		return FALSE;

	// If use AMSDU, set flag.
	if (pAd->CommonCfg.DesiredHtPhy.AmsduEnable)
		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_AMSDU_INUSED);
	// Save Peer Capability
	if (pHtCapability->HtCapInfo.ShortGIfor20)
		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_SGI20_CAPABLE);
	if (pHtCapability->HtCapInfo.ShortGIfor40)
		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_SGI40_CAPABLE);
	if (pHtCapability->HtCapInfo.TxSTBC)
		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_TxSTBC_CAPABLE);
	if (pHtCapability->HtCapInfo.RxSTBC)
		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_RxSTBC_CAPABLE);
	if (pAd->CommonCfg.bRdg && pHtCapability->ExtHtCapInfo.RDGSupport)
	{
		CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[Wcid], fCLIENT_STATUS_RDG_CAPABLE);
	}

	if (Wcid < MAX_LEN_OF_MAC_TABLE)
	{
		pAd->MacTab.Content[Wcid].MpduDensity = pHtCapability->HtCapParm.MpduDensity;
	}

	// Will check ChannelWidth for MCSSet[4] below
	pAd->MlmeAux.HtCapability.MCSSet[4] = 0x1;
    switch (pAd->CommonCfg.RxStream)
	{
		case 1:
			pAd->MlmeAux.HtCapability.MCSSet[0] = 0xff;
			pAd->MlmeAux.HtCapability.MCSSet[1] = 0x00;
            pAd->MlmeAux.HtCapability.MCSSet[2] = 0x00;
            pAd->MlmeAux.HtCapability.MCSSet[3] = 0x00;
			break;
		case 2:
			pAd->MlmeAux.HtCapability.MCSSet[0] = 0xff;
			pAd->MlmeAux.HtCapability.MCSSet[1] = 0xff;
            pAd->MlmeAux.HtCapability.MCSSet[2] = 0x00;
            pAd->MlmeAux.HtCapability.MCSSet[3] = 0x00;
			break;
		case 3:
			pAd->MlmeAux.HtCapability.MCSSet[0] = 0xff;
			pAd->MlmeAux.HtCapability.MCSSet[1] = 0xff;
            pAd->MlmeAux.HtCapability.MCSSet[2] = 0xff;
            pAd->MlmeAux.HtCapability.MCSSet[3] = 0x00;
			break;
	}

	pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth = pAddHtInfo->AddHtInfo.RecomWidth & pAd->CommonCfg.DesiredHtPhy.ChannelWidth;

    DBGPRINT(RT_DEBUG_TRACE, ("RTMPCheckHt:: HtCapInfo.ChannelWidth=%d, RecomWidth=%d, DesiredHtPhy.ChannelWidth=%d, BW40MAvailForA/G=%d/%d, PhyMode=%d \n",
		pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth, pAddHtInfo->AddHtInfo.RecomWidth, pAd->CommonCfg.DesiredHtPhy.ChannelWidth,
		pAd->NicConfig2.field.BW40MAvailForA, pAd->NicConfig2.field.BW40MAvailForG, pAd->CommonCfg.PhyMode));

	pAd->MlmeAux.HtCapability.HtCapInfo.GF =  pHtCapability->HtCapInfo.GF &pAd->CommonCfg.DesiredHtPhy.GF;

	// Send Assoc Req with my HT capability.
	pAd->MlmeAux.HtCapability.HtCapInfo.AMsduSize =  pAd->CommonCfg.DesiredHtPhy.AmsduSize;
	pAd->MlmeAux.HtCapability.HtCapInfo.MimoPs =  pAd->CommonCfg.DesiredHtPhy.MimoPs;
	pAd->MlmeAux.HtCapability.HtCapInfo.ShortGIfor20 =  (pAd->CommonCfg.DesiredHtPhy.ShortGIfor20) & (pHtCapability->HtCapInfo.ShortGIfor20);
	pAd->MlmeAux.HtCapability.HtCapInfo.ShortGIfor40 =  (pAd->CommonCfg.DesiredHtPhy.ShortGIfor40) & (pHtCapability->HtCapInfo.ShortGIfor40);
	pAd->MlmeAux.HtCapability.HtCapInfo.TxSTBC =  (pAd->CommonCfg.DesiredHtPhy.TxSTBC)&(pHtCapability->HtCapInfo.RxSTBC);
	pAd->MlmeAux.HtCapability.HtCapInfo.RxSTBC =  (pAd->CommonCfg.DesiredHtPhy.RxSTBC)&(pHtCapability->HtCapInfo.TxSTBC);
	pAd->MlmeAux.HtCapability.HtCapParm.MaxRAmpduFactor = pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor;
    pAd->MlmeAux.HtCapability.HtCapParm.MpduDensity = pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity;
	pAd->MlmeAux.HtCapability.ExtHtCapInfo.PlusHTC = pHtCapability->ExtHtCapInfo.PlusHTC;
	pAd->MacTab.Content[Wcid].HTCapability.ExtHtCapInfo.PlusHTC = pHtCapability->ExtHtCapInfo.PlusHTC;
	if (pAd->CommonCfg.bRdg)
	{
		pAd->MlmeAux.HtCapability.ExtHtCapInfo.RDGSupport = pHtCapability->ExtHtCapInfo.RDGSupport;
        pAd->MlmeAux.HtCapability.ExtHtCapInfo.PlusHTC = 1;
	}

    if (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_20)
        pAd->MlmeAux.HtCapability.MCSSet[4] = 0x0;  // BW20 can't transmit MCS32

	COPY_AP_HTSETTINGS_FROM_BEACON(pAd, pHtCapability);
	return TRUE;
}
#endif // DOT11_N_SUPPORT //
#endif // CONFIG_STA_SUPPORT //

/*
	========================================================================

	Routine Description:
		Verify the support rate for different PHY type

	Arguments:
		pAd				Pointer to our adapter

	Return Value:
		None

	IRQL = PASSIVE_LEVEL

	========================================================================
*/
VOID RTMPUpdateMlmeRate(
	IN PRTMP_ADAPTER	pAd)
{
	UCHAR	MinimumRate;
	UCHAR	ProperMlmeRate; //= RATE_54;
	UCHAR	i, j, RateIdx = 12; //1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
	BOOLEAN	bMatch = FALSE;

	switch (pAd->CommonCfg.PhyMode)
	{
		case PHY_11B:
			ProperMlmeRate = RATE_11;
			MinimumRate = RATE_1;
			break;
		case PHY_11BG_MIXED:
#ifdef DOT11_N_SUPPORT
		case PHY_11ABGN_MIXED:
		case PHY_11BGN_MIXED:
#endif // DOT11_N_SUPPORT //
			if ((pAd->MlmeAux.SupRateLen == 4) &&
				(pAd->MlmeAux.ExtRateLen == 0))
				// B only AP
				ProperMlmeRate = RATE_11;
			else
				ProperMlmeRate = RATE_24;

			if (pAd->MlmeAux.Channel <= 14)
			MinimumRate = RATE_1;
			else
				MinimumRate = RATE_6;
			break;
		case PHY_11A:
#ifdef DOT11_N_SUPPORT
		case PHY_11N_2_4G:	// rt2860 need to check mlmerate for 802.11n
		case PHY_11GN_MIXED:
		case PHY_11AGN_MIXED:
		case PHY_11AN_MIXED:
		case PHY_11N_5G:
#endif // DOT11_N_SUPPORT //
			ProperMlmeRate = RATE_24;
			MinimumRate = RATE_6;
			break;
		case PHY_11ABG_MIXED:
			ProperMlmeRate = RATE_24;
			if (pAd->MlmeAux.Channel <= 14)
			   MinimumRate = RATE_1;
			else
				MinimumRate = RATE_6;
			break;
		default: // error
			ProperMlmeRate = RATE_1;
			MinimumRate = RATE_1;
			break;
	}

	for (i = 0; i < pAd->MlmeAux.SupRateLen; i++)
	{
		for (j = 0; j < RateIdx; j++)
		{
			if ((pAd->MlmeAux.SupRate[i] & 0x7f) == RateIdTo500Kbps[j])
			{
				if (j == ProperMlmeRate)
				{
					bMatch = TRUE;
					break;
				}
			}
		}

		if (bMatch)
			break;
	}

	if (bMatch == FALSE)
	{
	for (i = 0; i < pAd->MlmeAux.ExtRateLen; i++)
	{
		for (j = 0; j < RateIdx; j++)
		{
			if ((pAd->MlmeAux.ExtRate[i] & 0x7f) == RateIdTo500Kbps[j])
			{
					if (j == ProperMlmeRate)
					{
						bMatch = TRUE;
						break;
					}
			}
		}

			if (bMatch)
			break;
	}
	}

	if (bMatch == FALSE)
	{
		ProperMlmeRate = MinimumRate;
	}

	pAd->CommonCfg.MlmeRate = MinimumRate;
	pAd->CommonCfg.RtsRate = ProperMlmeRate;
	if (pAd->CommonCfg.MlmeRate >= RATE_6)
	{
		pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
		pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MODE = MODE_OFDM;
		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
	}
	else
	{
		pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
		pAd->CommonCfg.MlmeTransmit.field.MCS = pAd->CommonCfg.MlmeRate;
		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MODE = MODE_CCK;
		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MCS = pAd->CommonCfg.MlmeRate;
	}

	DBGPRINT(RT_DEBUG_TRACE, ("RTMPUpdateMlmeRate ==>   MlmeTransmit = 0x%x  \n" , pAd->CommonCfg.MlmeTransmit.word));
}

CHAR RTMPMaxRssi(
	IN PRTMP_ADAPTER	pAd,
	IN CHAR				Rssi0,
	IN CHAR				Rssi1,
	IN CHAR				Rssi2)
{
	CHAR	larger = -127;

	if ((pAd->Antenna.field.RxPath == 1) && (Rssi0 != 0))
	{
		larger = Rssi0;
	}

	if ((pAd->Antenna.field.RxPath >= 2) && (Rssi1 != 0))
	{
		larger = max(Rssi0, Rssi1);
	}

	if ((pAd->Antenna.field.RxPath == 3) && (Rssi2 != 0))
	{
		larger = max(larger, Rssi2);
	}

	if (larger == -127)
		larger = 0;

	return larger;
}


/*
    ========================================================================
    Routine Description:
        Periodic evaluate antenna link status

    Arguments:
        pAd         - Adapter pointer

    Return Value:
        None

    ========================================================================
*/
VOID AsicEvaluateRxAnt(
	IN PRTMP_ADAPTER	pAd)
{
#ifdef CONFIG_STA_SUPPORT
	UCHAR	BBPR3 = 0;
#endif // CONFIG_STA_SUPPORT //

#ifdef RALINK_ATE
	if (ATE_ON(pAd))
		return;
#endif // RALINK_ATE //

	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS	|
							fRTMP_ADAPTER_HALT_IN_PROGRESS	|
							fRTMP_ADAPTER_RADIO_OFF			|
							fRTMP_ADAPTER_NIC_NOT_EXIST		|
							fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS) ||
							OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
#ifdef RT3090
							|| (pAd->bPCIclkOff == TRUE)
#endif // RT3090 //
#ifdef ANT_DIVERSITY_SUPPORT
							|| (pAd->EepromAccess)
#endif // ANT_DIVERSITY_SUPPORT //
							)
		return;

#ifdef ANT_DIVERSITY_SUPPORT
	if ((pAd->NicConfig2.field.AntDiversity) && (pAd->CommonCfg.bRxAntDiversity == ANT_DIVERSITY_ENABLE))
	{
		// two antenna selection mechanism- one is antenna diversity, the other is failed antenna remove
		// one is antenna diversity:there is only one antenna can rx and tx
		// the other is failed antenna remove:two physical antenna can rx and tx
			DBGPRINT(RT_DEBUG_TRACE,("AntDiv - before evaluate Pair1-Ant (%d,%d)\n",
				pAd->RxAnt.Pair1PrimaryRxAnt, pAd->RxAnt.Pair1SecondaryRxAnt));

			AsicSetRxAnt(pAd, pAd->RxAnt.Pair1SecondaryRxAnt);

			pAd->RxAnt.EvaluatePeriod = 1; // 1:Means switch to SecondaryRxAnt, 0:Means switch to Pair1PrimaryRxAnt
			pAd->RxAnt.FirstPktArrivedWhenEvaluate = FALSE;
			pAd->RxAnt.RcvPktNumWhenEvaluate = 0;

			// a one-shot timer to end the evalution
			// dynamic adjust antenna evaluation period according to the traffic
			if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
				RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 100);
			else
				RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300);
		}
		else
#endif // ANT_DIVERSITY_SUPPORT //
	{
#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		{

			if (pAd->StaCfg.Psm == PWR_SAVE)
				return;

			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
			BBPR3 &= (~0x18);
			if(pAd->Antenna.field.RxPath == 3)
			{
				BBPR3 |= (0x10);
			}
			else if(pAd->Antenna.field.RxPath == 2)
			{
				BBPR3 |= (0x8);
			}
			else if(pAd->Antenna.field.RxPath == 1)
			{
				BBPR3 |= (0x0);
			}
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
#ifdef RTMP_MAC_PCI
			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
			pAd->StaCfg.BBPR3 = BBPR3;
#endif // RTMP_MAC_PCI //
			if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
			)
			{
				ULONG	TxTotalCnt = pAd->RalinkCounters.OneSecTxNoRetryOkCount +
									pAd->RalinkCounters.OneSecTxRetryOkCount +
									pAd->RalinkCounters.OneSecTxFailCount;

				// dynamic adjust antenna evaluation period according to the traffic
				if (TxTotalCnt > 50)
				{
					RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 20);
					pAd->Mlme.bLowThroughput = FALSE;
				}
				else
				{
					RTMPSetTimer(&pAd->Mlme.RxAntEvalTimer, 300);
					pAd->Mlme.bLowThroughput = TRUE;
				}
			}
		}
#endif // CONFIG_STA_SUPPORT //
	}
}

/*
    ========================================================================
    Routine Description:
        After evaluation, check antenna link status

    Arguments:
        pAd         - Adapter pointer

    Return Value:
        None

    ========================================================================
*/
VOID AsicRxAntEvalTimeout(
	IN PVOID SystemSpecific1,
	IN PVOID FunctionContext,
	IN PVOID SystemSpecific2,
	IN PVOID SystemSpecific3)
{
	RTMP_ADAPTER	*pAd = (RTMP_ADAPTER *)FunctionContext;
	BOOLEAN			bSwapAnt = FALSE;
#ifdef CONFIG_STA_SUPPORT
	UCHAR			BBPR3 = 0;
	CHAR			larger = -127, rssi0, rssi1, rssi2;
#endif // CONFIG_STA_SUPPORT //

#ifdef RALINK_ATE
	if (ATE_ON(pAd))
		return;
#endif // RALINK_ATE //

	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS	|
							fRTMP_ADAPTER_HALT_IN_PROGRESS	|
							fRTMP_ADAPTER_RADIO_OFF			|
							fRTMP_ADAPTER_NIC_NOT_EXIST) ||
							OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
#ifdef RT3090
							|| (pAd->bPCIclkOff == TRUE)
#endif // RT3090 //
#ifdef ANT_DIVERSITY_SUPPORT
							|| (pAd->EepromAccess)
#endif // ANT_DIVERSITY_SUPPORT //
							)
		return;

#ifdef ANT_DIVERSITY_SUPPORT
	if ((pAd->NicConfig2.field.AntDiversity) && (pAd->CommonCfg.bRxAntDiversity == ANT_DIVERSITY_ENABLE))
	{
#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
			if ((pAd->RxAnt.RcvPktNumWhenEvaluate != 0) && (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1SecondaryRxAnt] >= pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1PrimaryRxAnt]))
				bSwapAnt = TRUE;
#endif // CONFIG_STA_SUPPORT //
		if (bSwapAnt == TRUE)
			{
				UCHAR			temp;

				//
				// select PrimaryRxAntPair
				//    Role change, Used Pair1SecondaryRxAnt as PrimaryRxAntPair.
				//    Since Pair1SecondaryRxAnt Quality good than Pair1PrimaryRxAnt
				//
				temp = pAd->RxAnt.Pair1PrimaryRxAnt;
				pAd->RxAnt.Pair1PrimaryRxAnt = pAd->RxAnt.Pair1SecondaryRxAnt;
				pAd->RxAnt.Pair1SecondaryRxAnt = temp;

#ifdef CONFIG_STA_SUPPORT
				pAd->RxAnt.Pair1LastAvgRssi = (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1SecondaryRxAnt] >> 3);
#endif // CONFIG_STA_SUPPORT //
//				pAd->RxAnt.EvaluateStableCnt = 0;
			}
			else
			{
				// if the evaluated antenna is not better than original, switch back to original antenna
				AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt);
				pAd->RxAnt.EvaluateStableCnt ++;
			}

			pAd->RxAnt.EvaluatePeriod = 0; // 1:Means switch to SecondaryRxAnt, 0:Means switch to Pair1PrimaryRxAnt

#ifdef CONFIG_STA_SUPPORT
			DBGPRINT(RT_DEBUG_TRACE,("AsicRxAntEvalAction::After Eval(fix in #%d), <%d, %d>, RcvPktNumWhenEvaluate=%ld\n",
					pAd->RxAnt.Pair1PrimaryRxAnt, (pAd->RxAnt.Pair1AvgRssi[0] >> 3), (pAd->RxAnt.Pair1AvgRssi[1] >> 3), pAd->RxAnt.RcvPktNumWhenEvaluate));
#endif // CONFIG_STA_SUPPORT //
		}
		else
#endif // ANT_DIVERSITY_SUPPORT //
	{
#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		{
			if (pAd->StaCfg.Psm == PWR_SAVE)
				return;


			// if the traffic is low, use average rssi as the criteria
			if (pAd->Mlme.bLowThroughput == TRUE)
			{
				rssi0 = pAd->StaCfg.RssiSample.LastRssi0;
				rssi1 = pAd->StaCfg.RssiSample.LastRssi1;
				rssi2 = pAd->StaCfg.RssiSample.LastRssi2;
			}
			else
			{
				rssi0 = pAd->StaCfg.RssiSample.AvgRssi0;
				rssi1 = pAd->StaCfg.RssiSample.AvgRssi1;
				rssi2 = pAd->StaCfg.RssiSample.AvgRssi2;
			}

			if(pAd->Antenna.field.RxPath == 3)
			{
				larger = max(rssi0, rssi1);

				if (larger > (rssi2 + 20))
					pAd->Mlme.RealRxPath = 2;
				else
					pAd->Mlme.RealRxPath = 3;
			}
			else if(pAd->Antenna.field.RxPath == 2)
			{
				if (rssi0 > (rssi1 + 20))
					pAd->Mlme.RealRxPath = 1;
				else
					pAd->Mlme.RealRxPath = 2;
			}

			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
			BBPR3 &= (~0x18);
			if(pAd->Mlme.RealRxPath == 3)
			{
				BBPR3 |= (0x10);
			}
			else if(pAd->Mlme.RealRxPath == 2)
			{
				BBPR3 |= (0x8);
			}
			else if(pAd->Mlme.RealRxPath == 1)
			{
				BBPR3 |= (0x0);
			}
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
#ifdef RTMP_MAC_PCI
			pAd->StaCfg.BBPR3 = BBPR3;
#endif // RTMP_MAC_PCI //
		}
#endif // CONFIG_STA_SUPPORT //
	}
}


VOID APSDPeriodicExec(
	IN PVOID SystemSpecific1,
	IN PVOID FunctionContext,
	IN PVOID SystemSpecific2,
	IN PVOID SystemSpecific3)
{
	RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;

	if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
		return;

	pAd->CommonCfg.TriggerTimerCount++;

// Driver should not send trigger frame, it should be send by application layer
/*
	if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable
		&& (pAd->CommonCfg.bNeedSendTriggerFrame ||
		(((pAd->CommonCfg.TriggerTimerCount%20) == 19) && (!pAd->CommonCfg.bAPSDAC_BE || !pAd->CommonCfg.bAPSDAC_BK || !pAd->CommonCfg.bAPSDAC_VI || !pAd->CommonCfg.bAPSDAC_VO))))
	{
		DBGPRINT(RT_DEBUG_TRACE,("Sending trigger frame and enter service period when support APSD\n"));
		RTMPSendNullFrame(pAd, pAd->CommonCfg.TxRate, TRUE);
		pAd->CommonCfg.bNeedSendTriggerFrame = FALSE;
		pAd->CommonCfg.TriggerTimerCount = 0;
		pAd->CommonCfg.bInServicePeriod = TRUE;
	}*/
}

/*
    ========================================================================
    Routine Description:
        Set/reset MAC registers according to bPiggyBack parameter

    Arguments:
        pAd         - Adapter pointer
        bPiggyBack  - Enable / Disable Piggy-Back

    Return Value:
        None

    ========================================================================
*/
VOID RTMPSetPiggyBack(
    IN PRTMP_ADAPTER    pAd,
    IN BOOLEAN          bPiggyBack)
{
	TX_LINK_CFG_STRUC  TxLinkCfg;

	RTMP_IO_READ32(pAd, TX_LINK_CFG, &TxLinkCfg.word);

	TxLinkCfg.field.TxCFAckEn = bPiggyBack;
	RTMP_IO_WRITE32(pAd, TX_LINK_CFG, TxLinkCfg.word);
}

/*
    ========================================================================
    Routine Description:
        check if this entry need to switch rate automatically

    Arguments:
        pAd
        pEntry

    Return Value:
        TURE
        FALSE

    ========================================================================
*/
BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
	IN PRTMP_ADAPTER    pAd,
	IN PMAC_TABLE_ENTRY	pEntry)
{
	BOOLEAN		result = TRUE;


#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		// only associated STA counts
		if (pEntry && (pEntry->ValidAsCLI) && (pEntry->Sst == SST_ASSOC))
		{
		result = pAd->StaCfg.bAutoTxRateSwitch;
	}
		else
			result = FALSE;

#ifdef QOS_DLS_SUPPORT
		if (pEntry && (pEntry->ValidAsDls))
			result = pAd->StaCfg.bAutoTxRateSwitch;
#endif // QOS_DLS_SUPPORT //
	}
#endif // CONFIG_STA_SUPPORT //


	return result;
}


BOOLEAN RTMPAutoRateSwitchCheck(
	IN PRTMP_ADAPTER    pAd)
{

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		if (pAd->StaCfg.bAutoTxRateSwitch)
			return TRUE;
	}
#endif // CONFIG_STA_SUPPORT //
	return FALSE;
}


/*
    ========================================================================
    Routine Description:
        check if this entry need to fix tx legacy rate

    Arguments:
        pAd
        pEntry

    Return Value:
        TURE
        FALSE

    ========================================================================
*/
UCHAR RTMPStaFixedTxMode(
	IN PRTMP_ADAPTER    pAd,
	IN PMAC_TABLE_ENTRY	pEntry)
{
	UCHAR	tx_mode = FIXED_TXMODE_HT;


#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		tx_mode = (UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode;
	}
#endif // CONFIG_STA_SUPPORT //

	return tx_mode;
}

/*
    ========================================================================
    Routine Description:
        Overwrite HT Tx Mode by Fixed Legency Tx Mode, if specified.

    Arguments:
        pAd
        pEntry

    Return Value:
        TURE
        FALSE

    ========================================================================
*/
VOID RTMPUpdateLegacyTxSetting(
		UCHAR				fixed_tx_mode,
		PMAC_TABLE_ENTRY	pEntry)
{
	HTTRANSMIT_SETTING TransmitSetting;

	if (fixed_tx_mode == FIXED_TXMODE_HT)
		return;

	TransmitSetting.word = 0;

	TransmitSetting.field.MODE = pEntry->HTPhyMode.field.MODE;
	TransmitSetting.field.MCS = pEntry->HTPhyMode.field.MCS;

	if (fixed_tx_mode == FIXED_TXMODE_CCK)
	{
		TransmitSetting.field.MODE = MODE_CCK;
		// CCK mode allow MCS 0~3
		if (TransmitSetting.field.MCS > MCS_3)
			TransmitSetting.field.MCS = MCS_3;
	}
	else
	{
		TransmitSetting.field.MODE = MODE_OFDM;
		// OFDM mode allow MCS 0~7
		if (TransmitSetting.field.MCS > MCS_7)
			TransmitSetting.field.MCS = MCS_7;
	}

	if (pEntry->HTPhyMode.field.MODE >= TransmitSetting.field.MODE)
	{
		pEntry->HTPhyMode.word = TransmitSetting.word;
		DBGPRINT(RT_DEBUG_TRACE, ("RTMPUpdateLegacyTxSetting : wcid-%d, MODE=%s, MCS=%d \n",
				pEntry->Aid, GetPhyMode(pEntry->HTPhyMode.field.MODE), pEntry->HTPhyMode.field.MCS));
	}
}

#ifdef CONFIG_STA_SUPPORT
/*
	==========================================================================
	Description:
		dynamic tune BBP R66 to find a balance between sensibility and
		noise isolation

	IRQL = DISPATCH_LEVEL

	==========================================================================
 */
VOID AsicStaBbpTuning(
	IN PRTMP_ADAPTER pAd)
{
	UCHAR	OrigR66Value = 0, R66;//, R66UpperBound = 0x30, R66LowerBound = 0x30;
	CHAR	Rssi;

	// 2860C did not support Fase CCA, therefore can't tune
	if (pAd->MACVersion == 0x28600100)
		return;

	//
	// work as a STA
	//
	if (pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE)  // no R66 tuning when SCANNING
		return;

	if ((pAd->OpMode == OPMODE_STA)
		&& (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
			)
		&& !(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
#ifdef RTMP_MAC_PCI
		&& (pAd->bPCIclkOff == FALSE)
#endif // RTMP_MAC_PCI //
		)
	{
		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &OrigR66Value);
		R66 = OrigR66Value;

		if (pAd->Antenna.field.RxPath > 1)
			Rssi = (pAd->StaCfg.RssiSample.AvgRssi0 + pAd->StaCfg.RssiSample.AvgRssi1) >> 1;
		else
			Rssi = pAd->StaCfg.RssiSample.AvgRssi0;

		if (pAd->LatchRfRegs.Channel <= 14)
		{	//BG band
#ifdef RT30xx
			// RT3070 is a no LNA solution, it should have different control regarding to AGC gain control
			// Otherwise, it will have some throughput side effect when low RSSI

			if (IS_RT3070(pAd)||IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
			{
				if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
				{
					R66 = 0x1C + 2*GET_LNA_GAIN(pAd) + 0x20;
					if (OrigR66Value != R66)
					{
							RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
					}
				}
				else
				{
					R66 = 0x1C + 2*GET_LNA_GAIN(pAd);
					if (OrigR66Value != R66)
					{
							RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
					}
				}
			}
			else
#endif // RT30xx //
			{
				if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
				{
					R66 = (0x2E + GET_LNA_GAIN(pAd)) + 0x10;
					if (OrigR66Value != R66)
					{
						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
					}
				}
				else
				{
					R66 = 0x2E + GET_LNA_GAIN(pAd);
					if (OrigR66Value != R66)
					{
						RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
					}
				}
			}
		}
		else
		{	//A band
			if (pAd->CommonCfg.BBPCurrentBW == BW_20)
			{
				if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
				{
					R66 = 0x32 + (GET_LNA_GAIN(pAd)*5)/3 + 0x10;
					if (OrigR66Value != R66)
					{
							RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
					}
				}
				else
				{
					R66 = 0x32 + (GET_LNA_GAIN(pAd)*5)/3;
					if (OrigR66Value != R66)
					{
							RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
					}
				}
			}
			else
			{
				if (Rssi > RSSI_FOR_MID_LOW_SENSIBILITY)
				{
					R66 = 0x3A + (GET_LNA_GAIN(pAd)*5)/3 + 0x10;
					if (OrigR66Value != R66)
					{
							RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
					}
				}
				else
				{
					R66 = 0x3A + (GET_LNA_GAIN(pAd)*5)/3;
					if (OrigR66Value != R66)
					{
							RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
					}
				}
			}
		}


	}
}
#endif // CONFIG_STA_SUPPORT //

VOID RTMPSetAGCInitValue(
	IN PRTMP_ADAPTER	pAd,
	IN UCHAR			BandWidth)
{
	UCHAR	R66 = 0x30;

	if (pAd->LatchRfRegs.Channel <= 14)
	{	// BG band
#ifdef RT30xx
		/* Gary was verified Amazon AP and find that RT307x has BBP_R66 invalid default value */

		if (IS_RT3070(pAd)||IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))
		{
			R66 = 0x1C + 2*GET_LNA_GAIN(pAd);
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
		}
		else
#endif // RT30xx //
		{
			R66 = 0x2E + GET_LNA_GAIN(pAd);
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
		}
	}
	else
	{	//A band
		{
			if (BandWidth == BW_20)
			{
				R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3);
				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
			}
#ifdef DOT11_N_SUPPORT
			else
			{
				R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3);
				RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
			}
#endif // DOT11_N_SUPPORT //
		}
	}

}