diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 1a6f70e..feb7b11 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -71,6 +71,14 @@
 	  in the kernel.  This is helpful if you are debugging code that
 	  executes before the console is initialized.
 
+config EARLY_PRINTK
+	bool "Early printk"
+	depends on DEBUG_LL
+	help
+	  Say Y here if you want to have an early console using the
+	  kernel low-level debugging functions. Add earlyprintk to your
+	  kernel parameters to enable this console.
+
 config DEBUG_ICEDCC
 	bool "Kernel low-level debugging via EmbeddedICE DCC channel"
 	depends on DEBUG_LL
diff --git a/arch/arm/configs/gflt110_defconfig b/arch/arm/configs/gflt110_defconfig
index a907b20..cef0917 100644
--- a/arch/arm/configs/gflt110_defconfig
+++ b/arch/arm/configs/gflt110_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.32.11
-# Tue Mar  4 11:19:22 2014
+# Thu May 14 10:38:17 2015
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -81,10 +81,11 @@
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
-# CONFIG_PRINTK_PERSIST is not set
+CONFIG_PRINTK_PERSIST=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
@@ -517,6 +518,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -734,6 +736,8 @@
 CONFIG_FW_LOADER=y
 CONFIG_FIRMWARE_IN_KERNEL=y
 CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -1131,6 +1135,7 @@
 # CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
 # CONFIG_GPIO_SYSFS is not set
 
 #
@@ -1600,20 +1605,61 @@
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 79087dd..d0e40b7 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -52,5 +52,6 @@
 
 head-y			:= head$(MMUEXT).o
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 extra-y := $(head-y) init_task.o vmlinux.lds
diff --git a/arch/arm/kernel/early_printk.c b/arch/arm/kernel/early_printk.c
new file mode 100644
index 0000000..85aa2b2
--- /dev/null
+++ b/arch/arm/kernel/early_printk.c
@@ -0,0 +1,57 @@
+/*
+ *  linux/arch/arm/kernel/early_printk.c
+ *
+ *  Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/init.h>
+
+extern void printch(int);
+
+static void early_write(const char *s, unsigned n)
+{
+	while (n-- > 0) {
+		if (*s == '\n')
+			printch('\r');
+		printch(*s);
+		s++;
+	}
+}
+
+static void early_console_write(struct console *con, const char *s, unsigned n)
+{
+	early_write(s, n);
+}
+
+static struct console early_console = {
+	.name =		"earlycon",
+	.write =	early_console_write,
+	.flags =	CON_PRINTBUFFER | CON_BOOT,
+	.index =	-1,
+};
+
+asmlinkage void early_printk(const char *fmt, ...)
+{
+	char buf[512];
+	int n;
+	va_list ap;
+
+	va_start(ap, fmt);
+	n = vscnprintf(buf, sizeof(buf), fmt, ap);
+	early_write(buf, n);
+	va_end(ap);
+}
+
+static int __init setup_early_printk(char *buf)
+{
+	register_console(&early_console);
+	return 0;
+}
+
+early_param("earlyprintk", setup_early_printk);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index f95401e..cd0ba57 100755
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -801,12 +801,14 @@
 #endif
 	parse_cmdline(cmdline_p, boot_command_line);
 	paging_init(mdesc);
+#if 0
 #ifdef CONFIG_DEBUG_LL
 	{
 		extern int ll_debug;
 		ll_debug=1;
 	}
 #endif
+#endif
 	request_standard_resources(&meminfo, mdesc);
 
 #ifdef CONFIG_SMP
diff --git a/fs/proc/kmsg.c b/fs/proc/kmsg.c
index 7ca7834..a8c6d0f 100644
--- a/fs/proc/kmsg.c
+++ b/fs/proc/kmsg.c
@@ -12,37 +12,37 @@
 #include <linux/poll.h>
 #include <linux/proc_fs.h>
 #include <linux/fs.h>
+#include <linux/syslog.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
 extern wait_queue_head_t log_wait;
 
-extern int do_syslog(int type, char __user *bug, int count);
-
 static int kmsg_open(struct inode * inode, struct file * file)
 {
-	return do_syslog(1,NULL,0);
+	return do_syslog(SYSLOG_ACTION_OPEN, NULL, 0, SYSLOG_FROM_FILE);
 }
 
 static int kmsg_release(struct inode * inode, struct file * file)
 {
-	(void) do_syslog(0,NULL,0);
+	(void) do_syslog(SYSLOG_ACTION_CLOSE, NULL, 0, SYSLOG_FROM_FILE);
 	return 0;
 }
 
 static ssize_t kmsg_read(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
-	if ((file->f_flags & O_NONBLOCK) && !do_syslog(9, NULL, 0))
+	if ((file->f_flags & O_NONBLOCK) && 
+	    !do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0,SYSLOG_FROM_FILE))
 		return -EAGAIN;
-	return do_syslog(2, buf, count);
+	return do_syslog(SYSLOG_ACTION_READ, buf, count, SYSLOG_FROM_FILE);
 }
 
 static unsigned int kmsg_poll(struct file *file, poll_table *wait)
 {
 	poll_wait(file, &log_wait, wait);
-	if (do_syslog(9, NULL, 0))
+	if (do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_FILE))
 		return POLLIN | POLLRDNORM;
 	return 0;
 }
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index f4e3184..9f61498 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -15,6 +15,7 @@
 #include <linux/bitops.h>
 #include <linux/log2.h>
 #include <linux/typecheck.h>
+#include <linux/printk.h>
 #include <linux/ratelimit.h>
 #include <linux/dynamic_debug.h>
 #include <asm/byteorder.h>
@@ -88,31 +89,6 @@
  */
 #define lower_32_bits(n) ((u32)(n))
 
-#define	KERN_EMERG	"<0>"	/* system is unusable			*/
-#define	KERN_ALERT	"<1>"	/* action must be taken immediately	*/
-#define	KERN_CRIT	"<2>"	/* critical conditions			*/
-#define	KERN_ERR	"<3>"	/* error conditions			*/
-#define	KERN_WARNING	"<4>"	/* warning conditions			*/
-#define	KERN_NOTICE	"<5>"	/* normal but significant condition	*/
-#define	KERN_INFO	"<6>"	/* informational			*/
-#define	KERN_DEBUG	"<7>"	/* debug-level messages			*/
-
-/* Use the default kernel loglevel */
-#define KERN_DEFAULT	"<d>"
-/*
- * Annotation for a "continued" line of log printout (only done after a
- * line that had no enclosing \n). Only to be used by core/arch code
- * during early bootup (a continued line is not SMP-safe otherwise).
- */
-#define	KERN_CONT	"<c>"
-
-extern int console_printk[];
-
-#define console_loglevel (console_printk[0])
-#define default_message_loglevel (console_printk[1])
-#define minimum_console_loglevel (console_printk[2])
-#define default_console_loglevel (console_printk[3])
-
 struct completion;
 struct pt_regs;
 struct user;
@@ -211,95 +187,8 @@
 struct pid;
 extern struct pid *session_of_pgrp(struct pid *pgrp);
 
-/*
- * FW_BUG
- * Add this to a message where you are sure the firmware is buggy or behaves
- * really stupid or out of spec. Be aware that the responsible BIOS developer
- * should be able to fix this issue or at least get a concrete idea of the
- * problem by reading your message without the need of looking at the kernel
- * code.
- * 
- * Use it for definite and high priority BIOS bugs.
- *
- * FW_WARN
- * Use it for not that clear (e.g. could the kernel messed up things already?)
- * and medium priority BIOS bugs.
- *
- * FW_INFO
- * Use this one if you want to tell the user or vendor about something
- * suspicious, but generally harmless related to the firmware.
- *
- * Use it for information or very low priority BIOS bugs.
- */
-#define FW_BUG		"[Firmware Bug]: "
-#define FW_WARN		"[Firmware Warn]: "
-#define FW_INFO		"[Firmware Info]: "
-
-#ifdef CONFIG_PRINTK
-asmlinkage int vprintk(const char *fmt, va_list args)
-	__attribute__ ((format (printf, 1, 0)));
-asmlinkage int printk(const char * fmt, ...)
-	__attribute__ ((format (printf, 1, 2))) __cold;
-
-extern struct ratelimit_state printk_ratelimit_state;
-extern int printk_ratelimit(void);
-extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
-				   unsigned int interval_msec);
-
-extern int printk_delay_msec;
-
-/*
- * Print a one-time message (analogous to WARN_ONCE() et al):
- */
-#define printk_once(x...) ({			\
-	static bool __print_once = true;	\
-						\
-	if (__print_once) {			\
-		__print_once = false;		\
-		printk(x);			\
-	}					\
-})
-
-void log_buf_kexec_setup(void);
-#else
-static inline int vprintk(const char *s, va_list args)
-	__attribute__ ((format (printf, 1, 0)));
-static inline int vprintk(const char *s, va_list args) { return 0; }
-static inline int printk(const char *s, ...)
-	__attribute__ ((format (printf, 1, 2)));
-static inline int __cold printk(const char *s, ...) { return 0; }
-static inline int printk_ratelimit(void) { return 0; }
-static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
-					  unsigned int interval_msec)	\
-		{ return false; }
-
-/* No effect, but we still get type checking even in the !PRINTK case: */
-#define printk_once(x...) printk(x)
-
-static inline void log_buf_kexec_setup(void)
-{
-}
-#endif
-
-extern int printk_needs_cpu(int cpu);
-extern void printk_tick(void);
-
-extern void asmlinkage __attribute__((format(printf, 1, 2)))
-	early_printk(const char *fmt, ...);
-
 unsigned long int_sqrt(unsigned long);
 
-static inline void console_silent(void)
-{
-	console_loglevel = 0;
-}
-
-static inline void console_verbose(void)
-{
-	if (console_loglevel)
-		console_loglevel = 15;
-}
-
 extern void bust_spinlocks(int yes);
 extern void wake_up_klogd(void);
 extern int oops_in_progress;		/* If set, an oops, panic(), BUG() or die() is in progress */
@@ -335,22 +224,6 @@
 #define TAINT_WARN			9
 #define TAINT_CRAP			10
 
-extern void dump_stack(void) __cold;
-
-enum {
-	DUMP_PREFIX_NONE,
-	DUMP_PREFIX_ADDRESS,
-	DUMP_PREFIX_OFFSET
-};
-extern void hex_dump_to_buffer(const void *buf, size_t len,
-				int rowsize, int groupsize,
-				char *linebuf, size_t linebuflen, bool ascii);
-extern void print_hex_dump(const char *level, const char *prefix_str,
-				int prefix_type, int rowsize, int groupsize,
-				const void *buf, size_t len, bool ascii);
-extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
-			const void *buf, size_t len);
-
 extern const char hex_asc[];
 #define hex_asc_lo(x)	hex_asc[((x) & 0x0f)]
 #define hex_asc_hi(x)	hex_asc[((x) & 0xf0) >> 4]
@@ -362,50 +235,6 @@
 	return buf;
 }
 
-#ifndef pr_fmt
-#define pr_fmt(fmt) fmt
-#endif
-
-#define pr_emerg(fmt, ...) \
-        printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert(fmt, ...) \
-        printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit(fmt, ...) \
-        printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err(fmt, ...) \
-        printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warning(fmt, ...) \
-        printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_notice(fmt, ...) \
-        printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info(fmt, ...) \
-        printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_cont(fmt, ...) \
-	printk(KERN_CONT fmt, ##__VA_ARGS__)
-
-/* pr_devel() should produce zero code unless DEBUG is defined */
-#ifdef DEBUG
-#define pr_devel(fmt, ...) \
-	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_devel(fmt, ...) \
-	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug(fmt, ...) \
-	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
-/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
-#define pr_debug(fmt, ...) do { \
-	dynamic_pr_debug(fmt, ##__VA_ARGS__); \
-	} while (0)
-#else
-#define pr_debug(fmt, ...) \
-	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
 /*
  * General tracing related utility functions - trace_printk(),
  * tracing_on/tracing_off and tracing_start()/tracing_stop
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index 3c62ed4..4817b3a 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -425,6 +425,7 @@
 		if (((unsigned long)uaddr & PAGE_MASK) !=
 				((unsigned long)end & PAGE_MASK))
 		 	ret = __get_user(c, end);
+			(void)c;
 	}
 	return ret;
 }
diff --git a/include/linux/printk.h b/include/linux/printk.h
new file mode 100644
index 0000000..b772ca5
--- /dev/null
+++ b/include/linux/printk.h
@@ -0,0 +1,248 @@
+#ifndef __KERNEL_PRINTK__
+#define __KERNEL_PRINTK__
+
+extern const char linux_banner[];
+extern const char linux_proc_banner[];
+
+#define	KERN_EMERG	"<0>"	/* system is unusable			*/
+#define	KERN_ALERT	"<1>"	/* action must be taken immediately	*/
+#define	KERN_CRIT	"<2>"	/* critical conditions			*/
+#define	KERN_ERR	"<3>"	/* error conditions			*/
+#define	KERN_WARNING	"<4>"	/* warning conditions			*/
+#define	KERN_NOTICE	"<5>"	/* normal but significant condition	*/
+#define	KERN_INFO	"<6>"	/* informational			*/
+#define	KERN_DEBUG	"<7>"	/* debug-level messages			*/
+
+/* Use the default kernel loglevel */
+#define KERN_DEFAULT	"<d>"
+/*
+ * Annotation for a "continued" line of log printout (only done after a
+ * line that had no enclosing \n). Only to be used by core/arch code
+ * during early bootup (a continued line is not SMP-safe otherwise).
+ */
+#define	KERN_CONT	"<c>"
+
+extern int console_printk[];
+
+#define console_loglevel (console_printk[0])
+#define default_message_loglevel (console_printk[1])
+#define minimum_console_loglevel (console_printk[2])
+#define default_console_loglevel (console_printk[3])
+
+struct va_format {
+	const char *fmt;
+	va_list *va;
+};
+
+/*
+ * FW_BUG
+ * Add this to a message where you are sure the firmware is buggy or behaves
+ * really stupid or out of spec. Be aware that the responsible BIOS developer
+ * should be able to fix this issue or at least get a concrete idea of the
+ * problem by reading your message without the need of looking at the kernel
+ * code.
+ *
+ * Use it for definite and high priority BIOS bugs.
+ *
+ * FW_WARN
+ * Use it for not that clear (e.g. could the kernel messed up things already?)
+ * and medium priority BIOS bugs.
+ *
+ * FW_INFO
+ * Use this one if you want to tell the user or vendor about something
+ * suspicious, but generally harmless related to the firmware.
+ *
+ * Use it for information or very low priority BIOS bugs.
+ */
+#define FW_BUG		"[Firmware Bug]: "
+#define FW_WARN		"[Firmware Warn]: "
+#define FW_INFO		"[Firmware Info]: "
+
+/*
+ * HW_ERR
+ * Add this to a message for hardware errors, so that user can report
+ * it to hardware vendor instead of LKML or software vendor.
+ */
+#define HW_ERR		"[Hardware Error]: "
+
+#ifdef CONFIG_PRINTK
+asmlinkage int vprintk(const char *fmt, va_list args)
+	__attribute__ ((format (printf, 1, 0)));
+asmlinkage int printk(const char * fmt, ...)
+	__attribute__ ((format (printf, 1, 2))) __cold;
+
+/*
+ * Please don't use printk_ratelimit(), because it shares ratelimiting state
+ * with all other unrelated printk_ratelimit() callsites.  Instead use
+ * printk_ratelimited() or plain old __ratelimit().
+ */
+extern int __printk_ratelimit(const char *func);
+#define printk_ratelimit() __printk_ratelimit(__func__)
+extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+				   unsigned int interval_msec);
+
+extern int printk_delay_msec;
+extern int dmesg_restrict;
+
+/*
+ * Print a one-time message (analogous to WARN_ONCE() et al):
+ */
+#define printk_once(x...) ({			\
+	static bool __print_once;		\
+						\
+	if (!__print_once) {			\
+		__print_once = true;		\
+		printk(x);			\
+	}					\
+})
+
+void log_buf_kexec_setup(void);
+#else
+static inline int vprintk(const char *s, va_list args)
+	__attribute__ ((format (printf, 1, 0)));
+static inline int vprintk(const char *s, va_list args) { return 0; }
+static inline int printk(const char *s, ...)
+	__attribute__ ((format (printf, 1, 2)));
+static inline int __cold printk(const char *s, ...) { return 0; }
+static inline int printk_ratelimit(void) { return 0; }
+static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
+					  unsigned int interval_msec)	\
+		{ return false; }
+
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_once(x...) printk(x)
+
+static inline void log_buf_kexec_setup(void)
+{
+}
+#endif
+
+/*
+ * Dummy printk for disabled debugging statements to use whilst maintaining
+ * gcc's format and side-effect checking.
+ */
+static inline __attribute__ ((format (printf, 1, 2)))
+int no_printk(const char *s, ...) { return 0; }
+
+extern int printk_needs_cpu(int cpu);
+extern void printk_tick(void);
+
+extern void asmlinkage __attribute__((format(printf, 1, 2)))
+	early_printk(const char *fmt, ...);
+
+static inline void console_silent(void)
+{
+	console_loglevel = 0;
+}
+
+static inline void console_verbose(void)
+{
+	if (console_loglevel)
+		console_loglevel = 15;
+}
+
+extern void dump_stack(void) __cold;
+
+enum {
+	DUMP_PREFIX_NONE,
+	DUMP_PREFIX_ADDRESS,
+	DUMP_PREFIX_OFFSET
+};
+extern void hex_dump_to_buffer(const void *buf, size_t len,
+				int rowsize, int groupsize,
+				char *linebuf, size_t linebuflen, bool ascii);
+extern void print_hex_dump(const char *level, const char *prefix_str,
+				int prefix_type, int rowsize, int groupsize,
+				const void *buf, size_t len, bool ascii);
+extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
+			const void *buf, size_t len);
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
+#define pr_emerg(fmt, ...) \
+        printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert(fmt, ...) \
+        printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit(fmt, ...) \
+        printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err(fmt, ...) \
+        printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning(fmt, ...) \
+        printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn pr_warning
+#define pr_notice(fmt, ...) \
+        printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info(fmt, ...) \
+        printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_cont(fmt, ...) \
+	printk(KERN_CONT fmt, ##__VA_ARGS__)
+
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug(fmt, ...) \
+	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#elif defined(CONFIG_DYNAMIC_DEBUG)
+/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
+#define pr_debug(fmt, ...) \
+	dynamic_pr_debug(fmt, ##__VA_ARGS__)
+#else
+#define pr_debug(fmt, ...) \
+	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/*
+ * ratelimited messages with local ratelimit_state,
+ * no local ratelimit_state used in the !PRINTK case
+ */
+#ifdef CONFIG_PRINTK
+#define printk_ratelimited(fmt, ...)  ({				\
+	static DEFINE_RATELIMIT_STATE(_rs,				\
+				      DEFAULT_RATELIMIT_INTERVAL,	\
+				      DEFAULT_RATELIMIT_BURST);		\
+									\
+	if (__ratelimit(&_rs))						\
+		printk(fmt, ##__VA_ARGS__);				\
+})
+#else
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_ratelimited printk
+#endif
+
+#define pr_emerg_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn_ratelimited pr_warning_ratelimited
+#define pr_notice_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+/* no pr_cont_ratelimited, don't do that... */
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug_ratelimited(fmt, ...) \
+	({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
+				     ##__VA_ARGS__); 0; })
+#endif
+
+#endif
diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h
index 00044b8..4330fcf 100644
--- a/include/linux/ratelimit.h
+++ b/include/linux/ratelimit.h
@@ -16,5 +16,9 @@
 #define DEFINE_RATELIMIT_STATE(name, interval, burst)		\
 		struct ratelimit_state name = {interval, burst,}
 
-extern int __ratelimit(struct ratelimit_state *rs);
+extern struct ratelimit_state printk_ratelimit_state;
+
+extern int ___ratelimit(struct ratelimit_state *rs, const char *func);
+#define __ratelimit(state) ___ratelimit(state, __func__)
+
 #endif
diff --git a/include/linux/syslog.h b/include/linux/syslog.h
new file mode 100644
index 0000000..3891139
--- /dev/null
+++ b/include/linux/syslog.h
@@ -0,0 +1,52 @@
+/*  Syslog internals
+ *
+ *  Copyright 2010 Canonical, Ltd.
+ *  Author: Kees Cook <kees.cook@canonical.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _LINUX_SYSLOG_H
+#define _LINUX_SYSLOG_H
+
+/* Close the log.  Currently a NOP. */
+#define SYSLOG_ACTION_CLOSE          0
+/* Open the log. Currently a NOP. */
+#define SYSLOG_ACTION_OPEN           1
+/* Read from the log. */
+#define SYSLOG_ACTION_READ           2
+/* Read all messages remaining in the ring buffer. */
+#define SYSLOG_ACTION_READ_ALL       3
+/* Read and clear all messages remaining in the ring buffer */
+#define SYSLOG_ACTION_READ_CLEAR     4
+/* Clear ring buffer. */
+#define SYSLOG_ACTION_CLEAR          5
+/* Disable printk's to console */
+#define SYSLOG_ACTION_CONSOLE_OFF    6
+/* Enable printk's to console */
+#define SYSLOG_ACTION_CONSOLE_ON     7
+/* Set level of messages printed to console */
+#define SYSLOG_ACTION_CONSOLE_LEVEL  8
+/* Return number of unread characters in the log buffer */
+#define SYSLOG_ACTION_SIZE_UNREAD    9
+/* Return size of the log buffer */
+#define SYSLOG_ACTION_SIZE_BUFFER   10
+
+#define SYSLOG_FROM_CALL 0
+#define SYSLOG_FROM_FILE 1
+
+int do_syslog(int type, char __user *buf, int count, bool from_file);
+
+#endif /* _LINUX_SYSLOG_H */
diff --git a/kernel/cred.c b/kernel/cred.c
index 1ed8ca1..3327e0e 100644
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -22,10 +22,6 @@
 #define kdebug(FMT, ...) \
 	printk("[%-5.5s%5u] "FMT"\n", current->comm, current->pid ,##__VA_ARGS__)
 #else
-static inline __attribute__((format(printf, 1, 2)))
-void no_printk(const char *fmt, ...)
-{
-}
 #define kdebug(FMT, ...) \
 	no_printk("[%-5.5s%5u] "FMT"\n", current->comm, current->pid ,##__VA_ARGS__)
 #endif
diff --git a/kernel/printk.c b/kernel/printk.c
index ad1a79b..78a9306 100755
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -33,12 +33,12 @@
 #include <linux/bootmem.h>
 #include <linux/syscalls.h>
 #include <linux/kexec.h>
+#include <linux/ratelimit.h>
+#include <linux/cpu.h>
+#include <linux/notifier.h>
+#include <linux/syslog.h>
 
 #include <asm/uaccess.h>
-#ifdef CONFIG_DEBUG_LL
-/*ll_debug*/
-#include <mach/uncompress.h>
-#endif
 
 /*
  * for_each_console() allows you to iterate on each console
@@ -198,6 +198,63 @@
 #define PERSIST_SEARCH_JUMP (16*1024*1024)
 #define PERSIST_MAGIC 0xbabb1e
 
+#ifdef CONFIG_BOOTLOG_COPY
+#define BOOTLOG_MAGIC (0x1090091e)
+struct bloghdr {
+	unsigned int magic; /* for kernel verification */
+	unsigned int offset; /* current log offset */
+};
+
+extern unsigned long bootlog_get_addr(void);
+extern unsigned long bootlog_get_size(void);
+
+static inline struct bloghdr *get_bootlog_hdr(void)
+{
+	unsigned long bootlog_size = bootlog_get_size();
+	if (bootlog_size) {
+		struct bloghdr *blog_hdr = (struct bloghdr *)
+				phys_to_virt(bootlog_get_addr());
+		if (BOOTLOG_MAGIC != blog_hdr->magic ||
+		    (blog_hdr->offset + sizeof(struct bloghdr) >
+                     bootlog_size)) {
+			printk(KERN_INFO "bootlog: header invalid m:0x%08x "
+			       "o:0x%08x s:0x%08x\n", blog_hdr->magic,
+                               blog_hdr->offset, bootlog_size);
+			return NULL;
+		}
+		return blog_hdr;
+	}
+	return NULL;
+}
+
+static inline unsigned copy_bootlog(struct bloghdr *blog_hdr,
+				    unsigned dest_offset)
+{
+	if (blog_hdr) {
+		unsigned idx = dest_offset;
+		char *blog_buf = (char *)(blog_hdr + 1);
+		unsigned i;
+
+		for (i = 0; i < blog_hdr->offset; ++i) {
+			LOG_BUF(idx) = blog_buf[i];
+			++idx;
+		}
+		if (logged_chars + blog_hdr->offset <= log_buf_len)
+			logged_chars += blog_hdr->offset;
+		else
+			logged_chars = log_buf_len;
+		dest_offset = idx;
+	}
+        return dest_offset;
+}
+
+static inline void free_bootlog(void)
+{
+	free_bootmem(bootlog_get_addr(), bootlog_get_size());
+}
+
+#endif
+
 /*
  * size is a power of 2 so that the printk offset mask will work.  We'll add
  * a bit more space to the end of the buffer for our extra data, but that
@@ -259,6 +316,9 @@
 {
 	unsigned size = memparse(str, &str);
 	unsigned long flags;
+#ifdef CONFIG_BOOTLOG_COPY
+	struct bloghdr *blog_hdr = NULL;
+#endif
 
 	if (size)
 		size = roundup_pow_of_two(size);
@@ -272,10 +332,19 @@
 			goto out;
 		}
 
+#ifdef CONFIG_BOOTLOG_COPY
+		/* Read out the blog_hdr before logbuf is locked in case print
+		 * is needed. */
+		blog_hdr = get_bootlog_hdr();
+#endif
+
 		spin_lock_irqsave(&logbuf_lock, flags);
 		log_buf_len = size;
 		log_buf = new_log_buf;
 
+#ifdef CONFIG_BOOTLOG_COPY
+		dest_offset = copy_bootlog(blog_hdr, dest_offset);
+#endif
 		offset = start = min(con_start, log_start);
 		dest_idx = dest_offset;
 		while (start != log_end) {
@@ -289,6 +358,10 @@
 		log_end += dest_offset - offset;
 		spin_unlock_irqrestore(&logbuf_lock, flags);
 
+#ifdef CONFIG_BOOTLOG_COPY
+		free_bootlog();
+#endif
+
 		printk(KERN_NOTICE "log_buf_len: %d\n", log_buf_len);
 	}
 out:
@@ -299,7 +372,7 @@
 
 #ifdef CONFIG_BOOT_PRINTK_DELAY
 
-static unsigned int boot_delay; /* msecs delay after each printk during bootup */
+static int boot_delay; /* msecs delay after each printk during bootup */
 static unsigned long long loops_per_msec;	/* based on boot_delay */
 
 static int __init boot_delay_setup(char *str)
@@ -350,23 +423,15 @@
 }
 #endif
 
+#ifdef CONFIG_SECURITY_DMESG_RESTRICT
+int dmesg_restrict = 1;
+#else
+int dmesg_restrict;
+#endif
+
 #define COPY_SIZE 4096
-/*
- * Commands to do_syslog:
- *
- * 	0 -- Close the log.  Currently a NOP.
- * 	1 -- Open the log. Currently a NOP.
- * 	2 -- Read from the log.
- * 	3 -- Read all messages remaining in the ring buffer.
- * 	4 -- Read and clear all messages remaining in the ring buffer
- * 	5 -- Clear ring buffer.
- * 	6 -- Disable printk's to console
- * 	7 -- Enable printk's to console
- *	8 -- Set level of messages printed to console
- *	9 -- Return number of unread characters in the log buffer
- *     10 -- Return size of the log buffer
- */
-int do_syslog(int type, char __user *buf, int len)
+
+int do_syslog(int type, char __user *buf, int len, bool from_file)
 {
 	char *copybuf;
 	unsigned i, j, limit, count;
@@ -374,16 +439,29 @@
 	char c;
 	int error = 0;
 
+	/*
+	 * If this is from /proc/kmsg we only do the capabilities checks
+	 * at open time.
+	 */
+	if (type == SYSLOG_ACTION_OPEN || !from_file) {
+		if (dmesg_restrict && !capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		if ((type != SYSLOG_ACTION_READ_ALL &&
+		     type != SYSLOG_ACTION_SIZE_BUFFER) &&
+		    !capable(CAP_SYS_ADMIN))
+			return -EPERM;
+	}
+
 	error = security_syslog(type);
 	if (error)
 		return error;
 
 	switch (type) {
-	case 0:		/* Close log */
+	case SYSLOG_ACTION_CLOSE:	/* Close log */
 		break;
-	case 1:		/* Open log */
+	case SYSLOG_ACTION_OPEN:	/* Open log */
 		break;
-	case 2:		/* Read from log */
+	case SYSLOG_ACTION_READ:	/* Read from log */
 		error = -EINVAL;
 		if (!buf || len < 0)
 			goto out;
@@ -414,10 +492,12 @@
 		if (!error)
 			error = i;
 		break;
-	case 4:		/* Read/clear last kernel messages */
+	/* Read/clear last kernel messages */
+	case SYSLOG_ACTION_READ_CLEAR:
 		do_clear = 1;
 		/* FALL THRU */
-	case 3:		/* Read last kernel messages */
+	/* Read last kernel messages */
+	case SYSLOG_ACTION_READ_ALL:
 		error = -EINVAL;
 		if (!buf || len < 0)
 			goto out;
@@ -489,21 +569,25 @@
 copy_done:
 		kfree(copybuf);
 		break;
-	case 5:		/* Clear ring buffer */
+	/* Clear ring buffer */
+	case SYSLOG_ACTION_CLEAR:
 		logged_chars = 0;
 		break;
-	case 6:		/* Disable logging to console */
+	/* Disable logging to console */
+	case SYSLOG_ACTION_CONSOLE_OFF:
 		if (saved_console_loglevel == -1)
 			saved_console_loglevel = console_loglevel;
 		console_loglevel = minimum_console_loglevel;
 		break;
-	case 7:		/* Enable logging to console */
+	/* Enable logging to console */
+	case SYSLOG_ACTION_CONSOLE_ON:
 		if (saved_console_loglevel != -1) {
 			console_loglevel = saved_console_loglevel;
 			saved_console_loglevel = -1;
 		}
 		break;
-	case 8:		/* Set level of messages printed to console */
+	/* Set level of messages printed to console */
+	case SYSLOG_ACTION_CONSOLE_LEVEL:
 		error = -EINVAL;
 		if (len < 1 || len > 8)
 			goto out;
@@ -514,10 +598,12 @@
 		saved_console_loglevel = -1;
 		error = 0;
 		break;
-	case 9:		/* Number of chars in the log buffer */
+	/* Number of chars in the log buffer */
+	case SYSLOG_ACTION_SIZE_UNREAD:
 		error = log_end - log_start;
 		break;
-	case 10:	/* Size of the log buffer */
+	/* Size of the log buffer */
+	case SYSLOG_ACTION_SIZE_BUFFER:
 		error = log_buf_len;
 		break;
 	default:
@@ -530,9 +616,25 @@
 
 SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len)
 {
-	return do_syslog(type, buf, len);
+	return do_syslog(type, buf, len, SYSLOG_FROM_CALL);
 }
 
+#ifdef	CONFIG_KGDB_KDB
+/* kdb dmesg command needs access to the syslog buffer.  do_syslog()
+ * uses locks so it cannot be used during debugging.  Just tell kdb
+ * where the start and end of the physical and logical logs are.  This
+ * is equivalent to do_syslog(3).
+ */
+void kdb_syslog_data(char *syslog_data[4])
+{
+	syslog_data[0] = log_buf;
+	syslog_data[1] = log_buf + log_buf_len;
+	syslog_data[2] = log_buf + log_end -
+		(logged_chars < log_buf_len ? logged_chars : log_buf_len);
+	syslog_data[3] = log_buf + log_end;
+}
+#endif	/* CONFIG_KGDB_KDB */
+
 /*
  * Call the console drivers on a range of log_buf
  */
@@ -657,7 +759,7 @@
 	/* If a crash is occurring, make sure we can't deadlock */
 	spin_lock_init(&logbuf_lock);
 	/* And make sure that we print immediately */
-	init_MUTEX(&console_sem);
+	sema_init(&console_sem, 1);
 }
 
 #if defined(CONFIG_PRINTK_TIME)
@@ -706,15 +808,21 @@
 	va_list args;
 	int r;
 
+#ifdef CONFIG_KGDB_KDB
+	if (unlikely(kdb_trap_printk)) {
+		va_start(args, fmt);
+		r = vkdb_printf(fmt, args);
+		va_end(args);
+		return r;
+	}
+#endif
 	va_start(args, fmt);
 	r = vprintk(fmt, args);
 	va_end(args);
 
 	return r;
 }
-#ifdef CONFIG_DEBUG_LL
-int ll_debug = 0;
-#endif
+
 /* cpu currently holding logbuf_lock */
 static volatile unsigned int printk_cpu = UINT_MAX;
 
@@ -742,6 +850,7 @@
  * released but interrupts still disabled.
  */
 static int acquire_console_semaphore_for_printk(unsigned int cpu)
+	__releases(&logbuf_lock)
 {
 	int retval = 0;
 
@@ -830,9 +939,6 @@
 	/* Emit the output into the temporary buffer */
 	printed_len += vscnprintf(printk_buf + printed_len,
 				  sizeof(printk_buf) - printed_len, fmt, args);
-#ifdef CONFIG_DEBUG_LL
-	{ extern void printascii(const char *); printascii(printk_buf); }
-#endif
 
 
 	p = printk_buf;
@@ -879,9 +985,9 @@
 
 				t = cpu_clock(printk_cpu);
 				nanosec_rem = do_div(t, 1000000000);
-				tlen = sprintf(tbuf, "[%5lu.%06lu] ",
+				tlen = sprintf(tbuf, "[%5lu.%03lu] ",
 						(unsigned long) t,
-						nanosec_rem / 1000);
+						nanosec_rem / 1000000);
 
 				for (tp = tbuf; tp < tbuf + tlen; tp++)
 					emit_log_char(*tp);
@@ -906,15 +1012,8 @@
 	 * will release 'logbuf_lock' regardless of whether it
 	 * actually gets the semaphore or not.
 	 */
-	if (acquire_console_semaphore_for_printk(this_cpu)) {
-#if defined(CONFIG_MV_PRINTK_SLICE_SUPPORT)
-		raw_local_irq_restore(flags);
+	if (acquire_console_semaphore_for_printk(this_cpu))
 		release_console_sem();
-		raw_local_irq_save(flags);
-#else
-		release_console_sem();
-#endif
-	}
 
 	lockdep_on();
 out_restore_irqs:
@@ -940,6 +1039,10 @@
 	struct console_cmdline *c;
 	int i;
 
+#ifdef CONFIG_BRCMSTB
+	/* Only support one console: the one most recently specified */
+	i = 0;
+#else
 	/*
 	 *	See if this tty is not yet registered, and
 	 *	if we have a slot free.
@@ -953,6 +1056,7 @@
 		}
 	if (i == MAX_CMDLINECONSOLES)
 		return -E2BIG;
+#endif
 	if (!brl_options)
 		selected_console = i;
 	c = &console_cmdline[i];
@@ -1090,6 +1194,32 @@
 }
 
 /**
+ * console_cpu_notify - print deferred console messages after CPU hotplug
+ * @self: notifier struct
+ * @action: CPU hotplug event
+ * @hcpu: unused
+ *
+ * If printk() is called from a CPU that is not online yet, the messages
+ * will be spooled but will not show up on the console.  This function is
+ * called when a new CPU comes online (or fails to come up), and ensures
+ * that any such output gets printed.
+ */
+static int __cpuinit console_cpu_notify(struct notifier_block *self,
+	unsigned long action, void *hcpu)
+{
+	switch (action) {
+	case CPU_ONLINE:
+	case CPU_DEAD:
+	case CPU_DYING:
+	case CPU_DOWN_FAILED:
+	case CPU_UP_CANCELED:
+		acquire_console_sem();
+		release_console_sem();
+	}
+	return NOTIFY_OK;
+}
+
+/**
  * acquire_console_sem - lock the console system for exclusive use.
  *
  * Acquires a semaphore which guarantees that the caller has
@@ -1139,6 +1269,8 @@
 
 int printk_needs_cpu(int cpu)
 {
+	if (unlikely(cpu_is_offline(cpu)))
+		printk_tick();
 	return per_cpu(printk_pending, cpu);
 }
 
@@ -1182,14 +1314,7 @@
 			break;			/* Nothing to print */
 		_con_start = con_start;
 		_log_end = log_end;
-#if defined(CONFIG_MV_PRINTK_SLICE_SUPPORT)
-		if((_log_end - _con_start) > CONFIG_MV_PRINTK_CHUNK_SIZE) {
-				_log_end = (_con_start + CONFIG_MV_PRINTK_CHUNK_SIZE);
-		}
-		con_start = _log_end;
-#else
 		con_start = log_end;		/* Flush */
-#endif
 		spin_unlock(&logbuf_lock);
 		stop_critical_timings();	/* don't trace print latency */
 		call_console_drivers(_con_start, _log_end);
@@ -1483,7 +1608,7 @@
 }
 EXPORT_SYMBOL(unregister_console);
 
-static int __init disable_boot_consoles(void)
+static int __init printk_late_init(void)
 {
 	struct console *con;
 
@@ -1494,9 +1619,10 @@
 			unregister_console(con);
 		}
 	}
+	hotcpu_notifier(console_cpu_notify, 0);
 	return 0;
 }
-late_initcall(disable_boot_consoles);
+late_initcall(printk_late_init);
 
 #if defined CONFIG_PRINTK
 
@@ -1508,11 +1634,11 @@
  */
 DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
 
-int printk_ratelimit(void)
+int __printk_ratelimit(const char *func)
 {
-	return __ratelimit(&printk_ratelimit_state);
+	return ___ratelimit(&printk_ratelimit_state, func);
 }
-EXPORT_SYMBOL(printk_ratelimit);
+EXPORT_SYMBOL(__printk_ratelimit);
 
 /**
  * printk_timed_ratelimit - caller-controlled printk ratelimiting
@@ -1536,4 +1662,125 @@
 	return false;
 }
 EXPORT_SYMBOL(printk_timed_ratelimit);
+
+static DEFINE_SPINLOCK(dump_list_lock);
+static LIST_HEAD(dump_list);
+
+#if 0
+/**
+ * kmsg_dump_register - register a kernel log dumper.
+ * @dumper: pointer to the kmsg_dumper structure
+ *
+ * Adds a kernel log dumper to the system. The dump callback in the
+ * structure will be called when the kernel oopses or panics and must be
+ * set. Returns zero on success and %-EINVAL or %-EBUSY otherwise.
+ */
+int kmsg_dump_register(struct kmsg_dumper *dumper)
+{
+	unsigned long flags;
+	int err = -EBUSY;
+
+	/* The dump callback needs to be set */
+	if (!dumper->dump)
+		return -EINVAL;
+
+	spin_lock_irqsave(&dump_list_lock, flags);
+	/* Don't allow registering multiple times */
+	if (!dumper->registered) {
+		dumper->registered = 1;
+		list_add_tail(&dumper->list, &dump_list);
+		err = 0;
+	}
+	spin_unlock_irqrestore(&dump_list_lock, flags);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_register);
+
+/**
+ * kmsg_dump_unregister - unregister a kmsg dumper.
+ * @dumper: pointer to the kmsg_dumper structure
+ *
+ * Removes a dump device from the system. Returns zero on success and
+ * %-EINVAL otherwise.
+ */
+int kmsg_dump_unregister(struct kmsg_dumper *dumper)
+{
+	unsigned long flags;
+	int err = -EINVAL;
+
+	spin_lock_irqsave(&dump_list_lock, flags);
+	if (dumper->registered) {
+		dumper->registered = 0;
+		list_del(&dumper->list);
+		err = 0;
+	}
+	spin_unlock_irqrestore(&dump_list_lock, flags);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_unregister);
+
+static const char * const kmsg_reasons[] = {
+	[KMSG_DUMP_OOPS]	= "oops",
+	[KMSG_DUMP_PANIC]	= "panic",
+	[KMSG_DUMP_KEXEC]	= "kexec",
+};
+
+static const char *kmsg_to_str(enum kmsg_dump_reason reason)
+{
+	if (reason >= ARRAY_SIZE(kmsg_reasons) || reason < 0)
+		return "unknown";
+
+	return kmsg_reasons[reason];
+}
+
+/**
+ * kmsg_dump - dump kernel log to kernel message dumpers.
+ * @reason: the reason (oops, panic etc) for dumping
+ *
+ * Iterate through each of the dump devices and call the oops/panic
+ * callbacks with the log buffer.
+ */
+void kmsg_dump(enum kmsg_dump_reason reason)
+{
+	unsigned long end;
+	unsigned chars;
+	struct kmsg_dumper *dumper;
+	const char *s1, *s2;
+	unsigned long l1, l2;
+	unsigned long flags;
+
+	/* Theoretically, the log could move on after we do this, but
+	   there's not a lot we can do about that. The new messages
+	   will overwrite the start of what we dump. */
+	spin_lock_irqsave(&logbuf_lock, flags);
+	end = log_end & LOG_BUF_MASK;
+	chars = logged_chars;
+	spin_unlock_irqrestore(&logbuf_lock, flags);
+
+	if (chars > end) {
+		s1 = log_buf + log_buf_len - chars + end;
+		l1 = chars - end;
+
+		s2 = log_buf;
+		l2 = end;
+	} else {
+		s1 = "";
+		l1 = 0;
+
+		s2 = log_buf + end - chars;
+		l2 = chars;
+	}
+
+	if (!spin_trylock_irqsave(&dump_list_lock, flags)) {
+		printk(KERN_ERR "dump_kmsg: dump list lock is held during %s, skipping dump\n",
+				kmsg_to_str(reason));
+		return;
+	}
+	list_for_each_entry(dumper, &dump_list, list)
+		dumper->dump(dumper, reason, s1, l1, s2, l2);
+	spin_unlock_irqrestore(&dump_list_lock, flags);
+}
+#endif
 #endif
diff --git a/lib/ratelimit.c b/lib/ratelimit.c
index 26187ed..eeab10f 100644
--- a/lib/ratelimit.c
+++ b/lib/ratelimit.c
@@ -23,7 +23,7 @@
  * This enforces a rate limit: not more than @rs->ratelimit_burst callbacks
  * in every @rs->ratelimit_jiffies
  */
-int __ratelimit(struct ratelimit_state *rs)
+int ___ratelimit(struct ratelimit_state *rs, const char *func)
 {
 	unsigned long flags;
 
@@ -37,7 +37,7 @@
 	if (time_is_before_jiffies(rs->begin + rs->interval)) {
 		if (rs->missed)
 			printk(KERN_WARNING "%s: %d callbacks suppressed\n",
-				__func__, rs->missed);
+				func, rs->missed);
 		rs->begin = 0;
 		rs->printed = 0;
 		rs->missed = 0;
@@ -54,4 +54,4 @@
 	spin_unlock_irqrestore(&ratelimit_lock, flags);
 	return 1;
 }
-EXPORT_SYMBOL(__ratelimit);
+EXPORT_SYMBOL(___ratelimit);
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 555d5d2..458c2ca 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -318,7 +318,10 @@
 			return 0;
 		pos = bdata->node_low_pfn;
 	}
-	BUG();
+	if (reserve && (flags & BOOTMEM_EXCLUSIVE))
+		return -ENOENT;	 /* not a bug as long as you use EXCLUSIVE */
+	else
+		BUG();
 }
 
 /**