diff --git a/arch/arm/configs/gflt110_defconfig b/arch/arm/configs/gflt110_defconfig
new file mode 100644
index 0000000..dd2ac27
--- /dev/null
+++ b/arch/arm/configs/gflt110_defconfig
@@ -0,0 +1,1650 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32.11
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_FEROCEON_ORION is not set
+# CONFIG_ARCH_FEROCEON_KW is not set
+CONFIG_ARCH_FEROCEON_KW2=y
+# CONFIG_ARCH_FEROCEON_MV78XX0 is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# Feroceon SoC options
+#
+CONFIG_MV88F6500=y
+# CONFIG_JTAG_DEBUG is not set
+
+#
+# Feroceon SoC Included Features
+#
+CONFIG_MV_NAND_SUPPORT=y
+CONFIG_MV_INCLUDE_PEX=y
+CONFIG_MV_INCLUDE_USB=y
+CONFIG_MV_INCLUDE_XOR=y
+# CONFIG_MV_INCLUDE_CESA is not set
+# CONFIG_MV_INCLUDE_NFC is not set
+CONFIG_MV_INCLUDE_LEGACY_NAND=y
+# CONFIG_MV_INCLUDE_INTEG_SATA is not set
+CONFIG_MV_INCLUDE_TDM=y
+CONFIG_MV_INCLUDE_GIG_ETH=y
+CONFIG_MV_INCLUDE_SPI=y
+CONFIG_MV_INCLUDE_SDIO=y
+# CONFIG_MV_INCLUDE_TS is not set
+CONFIG_MV_INCLUDE_PON=y
+CONFIG_MV_INCLUDE_TPM=y
+CONFIG_MV_INCLUDE_CUST=y
+CONFIG_MV_INCLUDE_SWITCH=y
+CONFIG_MV_GPP_MAX_PINS=70
+CONFIG_MV_DCACHE_SIZE=0x4000
+CONFIG_MV_ICACHE_SIZE=0x4000
+
+#
+# Feroceon SoC MTD support
+#
+CONFIG_MV_FLASH_CTRL=y
+CONFIG_MV_INCLUDE_SFLASH_MTD=y
+# CONFIG_MTD_NAND_LNC is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+CONFIG_USE_DSP=y
+CONFIG_MV_SP_I_FTCH_DB_INV=y
+# CONFIG_MV_SP_I_FTCH_LCK_L2_ICACHE is not set
+# CONFIG_MV_SP_I_FTCH_NONE is not set
+# CONFIG_MV_INTERNAL_REGS_SELECTIVE_MAPPING is not set
+CONFIG_FEROCEON_PROC=y
+CONFIG_UBOOT_STRUCT=y
+# CONFIG_MV_DBG_TRACE is not set
+CONFIG_MV_REAL_TIME=y
+# CONFIG_MV_CPU_PERF_CNTRS is not set
+# CONFIG_MV_CPU_L2_PERF_CNTRS is not set
+
+#
+# Power-Management options
+#
+CONFIG_MV_PMU_PROC=y
+CONFIG_MV_PM_IDLE_WFI_SR=y
+# CONFIG_MV_PM_IDLE_DEEPIDLE_SR is not set
+
+#
+# Soc DMA accelerations
+#
+# CONFIG_MV_USE_XOR_ENGINE is not set
+
+#
+# SoC Networking support
+#
+CONFIG_MV_ETHERNET=y
+# CONFIG_MV_ETH_LEGACY is not set
+CONFIG_MV_ETH_NETA=y
+CONFIG_MV_ETH_PORTS_NUM=3
+CONFIG_MV_ETH_0_MTU=1500
+CONFIG_MV_ETH_0_MACADDR="00:00:00:00:00:80"
+CONFIG_MV_ETH_1_MTU=1500
+CONFIG_MV_ETH_1_MACADDR="00:00:00:00:00:81"
+CONFIG_MV_ETH_2_MTU=1500
+CONFIG_MV_ETH_2_MACADDR="00:00:00:00:00:82"
+CONFIG_MV_ETH_RXQ=8
+CONFIG_MV_ETH_TXQ=8
+# CONFIG_MV_ETH_TSO is not set
+CONFIG_MV_ETH_TOOL=y
+# CONFIG_MV_LINUX_COUNTERS_DISABLE is not set
+CONFIG_NET_SKB_HEADROOM=96
+CONFIG_NET_SKB_RECYCLE=y
+CONFIG_NET_SKB_RECYCLE_DEF=1
+# CONFIG_MV_ETH_NFP is not set
+
+#
+# BM configuration
+#
+CONFIG_MV_ETH_BM=y
+# CONFIG_MV_ETH_BM_CPU is not set
+CONFIG_MV_ETH_BM_0_PKT_SIZE=2016
+CONFIG_MV_ETH_BM_1_PKT_SIZE=256
+CONFIG_MV_ETH_BM_2_PKT_SIZE=2016
+CONFIG_MV_ETH_BM_3_PKT_SIZE=256
+CONFIG_MV_ETH_BM_PORT_0=y
+CONFIG_MV_ETH_BM_PORT_0_LONG_POOL=0
+CONFIG_MV_ETH_BM_PORT_0_SHORT_POOL=1
+CONFIG_MV_ETH_BM_PORT_0_LONG_BUF_NUM=2048
+CONFIG_MV_ETH_BM_PORT_0_SHORT_BUF_NUM=4096
+CONFIG_MV_ETH_BM_PORT_1=y
+CONFIG_MV_ETH_BM_PORT_1_LONG_POOL=0
+CONFIG_MV_ETH_BM_PORT_1_SHORT_POOL=1
+CONFIG_MV_ETH_BM_PORT_1_LONG_BUF_NUM=2048
+CONFIG_MV_ETH_BM_PORT_1_SHORT_BUF_NUM=4096
+CONFIG_MV_ETH_BM_PORT_2=y
+CONFIG_MV_ETH_BM_PORT_2_LONG_POOL=2
+CONFIG_MV_ETH_BM_PORT_2_SHORT_POOL=3
+CONFIG_MV_ETH_BM_PORT_2_LONG_BUF_NUM=2048
+CONFIG_MV_ETH_BM_PORT_2_SHORT_BUF_NUM=4096
+CONFIG_MV_ETH_PNC=y
+CONFIG_MV_PNC_TCAM_LINES=512
+CONFIG_MV_ETH_PNC_MCAST_NUM=8
+CONFIG_MV_ETH_PNC_VLAN_PRIO=7
+CONFIG_MV_ETH_PNC_ETYPE=0
+CONFIG_MV_ETH_PNC_DSCP_PRIO=4
+# CONFIG_MV_ETH_PNC_L3_FLOW is not set
+# CONFIG_MV_ETH_PNC_WOL is not set
+CONFIG_MV_ETH_HWF=y
+CONFIG_MV_ETH_HWF_TXQ_DROP=60
+CONFIG_MV_ETH_HWF_TXQ_DROP_RND=0
+CONFIG_MV_ETH_PMT=y
+CONFIG_MV_ETH_PMT_FLOWS=256
+CONFIG_MV_ETH_PMT_CMD_PER_FLOW=12
+
+#
+# Network Interface configuration
+#
+
+#
+# Rx/Tx Queue configuration
+#
+CONFIG_MV_ETH_RXQ_DESC=128
+CONFIG_MV_ETH_RXQ_DEF=0
+CONFIG_MV_ETH_TXQ_DESC=3072
+CONFIG_MV_ETH_TXQ_DEF=0
+
+#
+# IP/TCP/UDP Offloading
+#
+CONFIG_MV_ETH_TX_CSUM_OFFLOAD=y
+CONFIG_MV_ETH_TX_CSUM_OFFLOAD_DEF=y
+CONFIG_MV_ETH_RX_CSUM_OFFLOAD=y
+CONFIG_MV_ETH_RX_CSUM_OFFLOAD_DEF=y
+# CONFIG_MV_ETH_GRO is not set
+
+#
+# Control and Statistics
+#
+CONFIG_MV_ETH_DEBUG_CODE=y
+CONFIG_MV_ETH_STAT_ERR=y
+CONFIG_MV_ETH_STAT_INF=y
+CONFIG_MV_ETH_STAT_DBG=y
+# CONFIG_MV_ETH_STAT_DIST is not set
+
+#
+# Advanced Features
+#
+CONFIG_MV_ETH_TX_DONE_TIMER_PERIOD=10
+CONFIG_MV_ETH_CLEANUP_TIMER_PERIOD=10
+# CONFIG_MV_ETH_TXDONE_ISR is not set
+CONFIG_MV_ETH_TXDONE_COAL_PKTS=16
+CONFIG_MV_ETH_RX_COAL_PKTS=32
+CONFIG_MV_ETH_RX_COAL_USEC=100
+# CONFIG_MV_ETH_RX_DESC_PREFETCH is not set
+# CONFIG_MV_ETH_RX_PKT_PREFETCH is not set
+CONFIG_MV_ETH_RX_SPECIAL=y
+CONFIG_MV_ETH_TX_SPECIAL=y
+# CONFIG_MV_ETH_L2FW is not set
+CONFIG_MV_ETH_RX_POLL_WEIGHT=64
+CONFIG_MV_ETH_EXTRA_BUF_SIZE=120
+CONFIG_MV_ETH_EXTRA_BUF_NUM=532
+
+#
+# NFP support
+#
+
+#
+# NAPI GROUPS
+#
+CONFIG_MV_ETH_NAPI_GROUPS=1
+
+#
+# Group 0
+#
+CONFIG_MV_ETH_GROUP0_CPU=0x1
+CONFIG_MV_ETH_GROUP0_RXQ=0xff
+
+#
+# PON support for Network driver
+#
+CONFIG_MV_PON=y
+CONFIG_MV_PON_TXP_DEF=0
+CONFIG_MV_PON_TXQ_DEF=0
+
+#
+# Switch support
+#
+CONFIG_MV_ETH_SWITCH=y
+CONFIG_MV_ETH_SWITCH_NETDEV_NUM=6
+CONFIG_MV_ETH_SWITCH_NETCONFIG_0="3,(00:11:66:11:66:11,0)(00:22:77:22:77:22,1:2:3:4),mtu=1500"
+CONFIG_MV_ETH_SWITCH_NETCONFIG_1="0"
+CONFIG_MV_ETH_SWITCH_LINK=y
+
+#
+# ERRATA / WA
+#
+# CONFIG_MV_ETH_6601_LB_WA is not set
+
+#
+# Telephony options
+#
+CONFIG_MV_PHONE=y
+CONFIG_MV_TDM_SUPPORT=y
+# CONFIG_MV_COMM_UNIT_SUPPORT is not set
+# CONFIG_SILABS_SLIC_SUPPORT is not set
+CONFIG_ZARLINK_SLIC_SUPPORT=y
+CONFIG_ZARLINK_SLIC_VE880=y
+# CONFIG_ZARLINK_SLIC_VE890 is not set
+# CONFIG_ZARLINK_SLIC_VE792 is not set
+CONFIG_MV_TDM_PCM_CLK_8MHZ=y
+# CONFIG_MV_TDM_PCM_CLK_4MHZ is not set
+# CONFIG_MV_TDM_PCM_CLK_2MHZ is not set
+# CONFIG_MV_TDM_USE_INTERNAL_PCLK_SOURCE is not set
+# CONFIG_MV_TDM_USE_EXTERNAL_PCLK_SOURCE is not set
+CONFIG_MV_TDM_USE_DCO=y
+CONFIG_MV_TDM_DUMMY=y
+# CONFIG_MV_PHONE_USE_IRQ_PROCESSING is not set
+# CONFIG_MV_PHONE_USE_FIQ_PROCESSING is not set
+CONFIG_MV_PHONE_USE_SLIC_LIBS=y
+# CONFIG_MV_TDM_EXT_STATS is not set
+
+#
+# SoC CUST support
+#
+CONFIG_MV_CUST=y
+CONFIG_MV_CUST_IGMP_HANDLE=y
+CONFIG_MV_CUST_MLD_HANDLE=y
+CONFIG_MV_CUST_LPBK_DETECT_HANDLE=y
+# CONFIG_MV_CUST_UDP_SAMPLE_HANDLE is not set
+CONFIG_MV_CUST_FLOW_MAP_HANDLE=y
+
+#
+# SoC PON support
+#
+CONFIG_MV_PON_TCONTS=8
+CONFIG_MV_EPON_LLID=1
+# CONFIG_PON_Z1 is not set
+CONFIG_PON_Z2=y
+# CONFIG_PON_FPGA is not set
+CONFIG_MV_GPON=y
+CONFIG_MV_EPON=y
+
+#
+# GPON Driver Options
+#
+CONFIG_MV_GPON_HW_INTERRUPT=y
+CONFIG_MV_GPON_DEBUG_PRINT=y
+CONFIG_MV_GPON_STATIC_GEM_PORT=y
+# CONFIG_MV_GPON_PERFORMANCE_CHECK is not set
+
+#
+# EPON Driver Options
+#
+CONFIG_MV_EPON_HW_INTERRUPT=y
+CONFIG_MV_EPON_DBA_LOW_RATE_VALUE=2000
+CONFIG_MV_EPON_DBA_LOW_RATE_THRESHOLD=20
+CONFIG_MV_EPON_DBA_LOW_RATE_CONST_VALUE=256
+CONFIG_MV_EPON_DBA_HIGH_RATE_THRESHOLD=8192
+CONFIG_MV_EPON_DBA_HIGH_RATE_VALUE=2000
+
+#
+# SoC TPM support
+#
+CONFIG_MV_TPM=y
+
+#
+# TPM Driver Options
+#
+# CONFIG_MV_TPM_Z1_VER is not set
+CONFIG_MV_TPM_Z2_VER=y
+# CONFIG_MV_TPM_FPGA_VER is not set
+CONFIG_MV_TPM_INT_LOCK=y
+# CONFIG_MV_TPM_DEBUG_PRINT is not set
+# CONFIG_MV_TPM_SFS_2_IOCTL is not set
+CONFIG_MV_TPM_SYSFS_HELP=y
+
+#
+# SoC MAC learning support
+#
+CONFIG_MV_MAC_LEARN=y
+# CONFIG_PCIE_VIRTUAL_BRIDGE_SUPPORT is not set
+# CONFIG_MV_UART_POLLING_MODE is not set
+# CONFIG_MV_PRINTK_SLICE_SUPPORT is not set
+CONFIG_MV_DRAM_DEFAULT_ACCESS_CFG=y
+# CONFIG_MV_DRAM_FASTPATH_ACCESS_CFG is not set
+# CONFIG_MV_DRAM_XBAR_ACCESS_CFG is not set
+CONFIG_ARCH_FEROCEON=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_FEROCEON=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_ARMV5_L2_CACHE_COHERENCY_FIX=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+CONFIG_REORDER=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_FEROCEON_KW2 is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_CMD="nand_mtd:0x200000@0x0(uboot)ro,0x400000@0x200000(uimageU),-@0x600000(rootfsU)"
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=24576
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=n
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MV_SCATTERED_SPINUP is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000E=y
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_SK98LIN=y
+# CONFIG_SK98LIN_NAPI is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=y
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+CONFIG_PHONE=y
+# CONFIG_PHONE_IXJ is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=n
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=n
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_MVSDIO=y
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=n
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=n
+CONFIG_UDF_NLS=n
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=n
+CONFIG_MSDOS_FS=n
+# CONFIG_VFAT_FS is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_NTFS_FS=n
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_LZMA=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZMA_NEEDED=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/gflt200_defconfig b/arch/arm/configs/gflt200_defconfig
new file mode 100644
index 0000000..2457f5b
--- /dev/null
+++ b/arch/arm/configs/gflt200_defconfig
@@ -0,0 +1,1646 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32.11
+# Sun Sep  2 08:35:19 2012
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_PRINTK_PERSIST=y
+CONFIG_PRINTK_TIME=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_FEROCEON_ORION is not set
+# CONFIG_ARCH_FEROCEON_KW is not set
+CONFIG_ARCH_FEROCEON_KW2=y
+# CONFIG_ARCH_FEROCEON_MV78XX0 is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# Feroceon SoC options
+#
+CONFIG_MV88F6500=y
+CONFIG_MACH_GFLT200=y
+# CONFIG_JTAG_DEBUG is not set
+
+#
+# Feroceon SoC Included Features
+#
+CONFIG_MV_NAND_SUPPORT=y
+CONFIG_MV_INCLUDE_PEX=y
+CONFIG_MV_INCLUDE_USB=y
+CONFIG_MV_INCLUDE_XOR=y
+# CONFIG_MV_INCLUDE_CESA is not set
+# CONFIG_MV_INCLUDE_NFC is not set
+CONFIG_MV_INCLUDE_LEGACY_NAND=y
+# CONFIG_MV_INCLUDE_INTEG_SATA is not set
+CONFIG_MV_INCLUDE_TDM=y
+CONFIG_MV_INCLUDE_GIG_ETH=y
+CONFIG_MV_INCLUDE_SPI=y
+CONFIG_MV_INCLUDE_SDIO=y
+# CONFIG_MV_INCLUDE_TS is not set
+CONFIG_MV_INCLUDE_PON=y
+CONFIG_MV_INCLUDE_TPM=y
+CONFIG_MV_INCLUDE_CUST=y
+CONFIG_MV_INCLUDE_SWITCH=y
+CONFIG_MV_GPP_MAX_PINS=70
+CONFIG_MV_DCACHE_SIZE=0x4000
+CONFIG_MV_ICACHE_SIZE=0x4000
+
+#
+# Feroceon SoC MTD support
+#
+CONFIG_MV_FLASH_CTRL=y
+CONFIG_MV_INCLUDE_SFLASH_MTD=y
+# CONFIG_MTD_NAND_LNC is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+CONFIG_USE_DSP=y
+CONFIG_MV_SP_I_FTCH_DB_INV=y
+# CONFIG_MV_SP_I_FTCH_LCK_L2_ICACHE is not set
+# CONFIG_MV_SP_I_FTCH_NONE is not set
+# CONFIG_MV_INTERNAL_REGS_SELECTIVE_MAPPING is not set
+CONFIG_FEROCEON_PROC=y
+CONFIG_UBOOT_STRUCT=y
+# CONFIG_MV_DBG_TRACE is not set
+CONFIG_MV_REAL_TIME=y
+# CONFIG_MV_CPU_PERF_CNTRS is not set
+# CONFIG_MV_CPU_L2_PERF_CNTRS is not set
+
+#
+# Power-Management options
+#
+CONFIG_MV_PMU_PROC=y
+CONFIG_MV_PM_IDLE_WFI_SR=y
+# CONFIG_MV_PM_IDLE_DEEPIDLE_SR is not set
+
+#
+# Soc DMA accelerations
+#
+# CONFIG_MV_USE_XOR_ENGINE is not set
+
+#
+# SoC Networking support
+#
+CONFIG_MV_ETHERNET=y
+# CONFIG_MV_ETH_LEGACY is not set
+CONFIG_MV_ETH_NETA=y
+CONFIG_MV_ETH_PORTS_NUM=3
+CONFIG_MV_ETH_0_MTU=1500
+CONFIG_MV_ETH_0_MACADDR="00:00:00:00:00:80"
+CONFIG_MV_ETH_1_MTU=1500
+CONFIG_MV_ETH_1_MACADDR="00:00:00:00:00:81"
+CONFIG_MV_ETH_2_MTU=1500
+CONFIG_MV_ETH_2_MACADDR="00:00:00:00:00:82"
+CONFIG_MV_ETH_RXQ=8
+CONFIG_MV_ETH_TXQ=8
+# CONFIG_MV_ETH_TSO is not set
+CONFIG_MV_ETH_TOOL=y
+# CONFIG_MV_LINUX_COUNTERS_DISABLE is not set
+CONFIG_NET_SKB_HEADROOM=96
+CONFIG_NET_SKB_RECYCLE=y
+CONFIG_NET_SKB_RECYCLE_DEF=1
+# CONFIG_MV_ETH_NFP is not set
+
+#
+# BM configuration
+#
+CONFIG_MV_ETH_BM=y
+# CONFIG_MV_ETH_BM_CPU is not set
+CONFIG_MV_ETH_BM_0_PKT_SIZE=2016
+CONFIG_MV_ETH_BM_1_PKT_SIZE=256
+CONFIG_MV_ETH_BM_2_PKT_SIZE=2016
+CONFIG_MV_ETH_BM_3_PKT_SIZE=256
+CONFIG_MV_ETH_BM_PORT_0=y
+CONFIG_MV_ETH_BM_PORT_0_LONG_POOL=0
+CONFIG_MV_ETH_BM_PORT_0_SHORT_POOL=1
+CONFIG_MV_ETH_BM_PORT_0_LONG_BUF_NUM=2048
+CONFIG_MV_ETH_BM_PORT_0_SHORT_BUF_NUM=4096
+CONFIG_MV_ETH_BM_PORT_1=y
+CONFIG_MV_ETH_BM_PORT_1_LONG_POOL=0
+CONFIG_MV_ETH_BM_PORT_1_SHORT_POOL=1
+CONFIG_MV_ETH_BM_PORT_1_LONG_BUF_NUM=2048
+CONFIG_MV_ETH_BM_PORT_1_SHORT_BUF_NUM=4096
+CONFIG_MV_ETH_BM_PORT_2=y
+CONFIG_MV_ETH_BM_PORT_2_LONG_POOL=2
+CONFIG_MV_ETH_BM_PORT_2_SHORT_POOL=3
+CONFIG_MV_ETH_BM_PORT_2_LONG_BUF_NUM=2048
+CONFIG_MV_ETH_BM_PORT_2_SHORT_BUF_NUM=4096
+CONFIG_MV_ETH_PNC=y
+CONFIG_MV_PNC_TCAM_LINES=512
+CONFIG_MV_ETH_PNC_MCAST_NUM=8
+CONFIG_MV_ETH_PNC_VLAN_PRIO=7
+CONFIG_MV_ETH_PNC_ETYPE=0
+CONFIG_MV_ETH_PNC_DSCP_PRIO=4
+# CONFIG_MV_ETH_PNC_L3_FLOW is not set
+# CONFIG_MV_ETH_PNC_WOL is not set
+CONFIG_MV_ETH_HWF=y
+CONFIG_MV_ETH_HWF_TXQ_DROP=60
+CONFIG_MV_ETH_HWF_TXQ_DROP_RND=0
+CONFIG_MV_ETH_PMT=y
+CONFIG_MV_ETH_PMT_FLOWS=256
+CONFIG_MV_ETH_PMT_CMD_PER_FLOW=12
+
+#
+# Network Interface configuration
+#
+
+#
+# Rx/Tx Queue configuration
+#
+CONFIG_MV_ETH_RXQ_DESC=128
+CONFIG_MV_ETH_RXQ_DEF=0
+CONFIG_MV_ETH_TXQ_DESC=3072
+CONFIG_MV_ETH_TXQ_DEF=0
+
+#
+# IP/TCP/UDP Offloading
+#
+CONFIG_MV_ETH_TX_CSUM_OFFLOAD=y
+CONFIG_MV_ETH_TX_CSUM_OFFLOAD_DEF=y
+CONFIG_MV_ETH_RX_CSUM_OFFLOAD=y
+CONFIG_MV_ETH_RX_CSUM_OFFLOAD_DEF=y
+# CONFIG_MV_ETH_GRO is not set
+
+#
+# Control and Statistics
+#
+CONFIG_MV_ETH_DEBUG_CODE=y
+CONFIG_MV_ETH_STAT_ERR=y
+CONFIG_MV_ETH_STAT_INF=y
+CONFIG_MV_ETH_STAT_DBG=y
+# CONFIG_MV_ETH_STAT_DIST is not set
+
+#
+# Advanced Features
+#
+CONFIG_MV_ETH_TX_DONE_TIMER_PERIOD=10
+CONFIG_MV_ETH_CLEANUP_TIMER_PERIOD=10
+# CONFIG_MV_ETH_TXDONE_ISR is not set
+CONFIG_MV_ETH_TXDONE_COAL_PKTS=16
+CONFIG_MV_ETH_RX_COAL_PKTS=32
+CONFIG_MV_ETH_RX_COAL_USEC=100
+# CONFIG_MV_ETH_RX_DESC_PREFETCH is not set
+# CONFIG_MV_ETH_RX_PKT_PREFETCH is not set
+CONFIG_MV_ETH_RX_SPECIAL=y
+CONFIG_MV_ETH_TX_SPECIAL=y
+# CONFIG_MV_ETH_L2FW is not set
+CONFIG_MV_ETH_RX_POLL_WEIGHT=64
+CONFIG_MV_ETH_EXTRA_BUF_SIZE=120
+CONFIG_MV_ETH_EXTRA_BUF_NUM=3072
+
+#
+# NFP support
+#
+
+#
+# NAPI GROUPS
+#
+CONFIG_MV_ETH_NAPI_GROUPS=1
+
+#
+# Group 0
+#
+CONFIG_MV_ETH_GROUP0_CPU=0x1
+CONFIG_MV_ETH_GROUP0_RXQ=0xff
+
+#
+# PON support for Network driver
+#
+CONFIG_MV_PON=y
+CONFIG_MV_PON_TXP_DEF=0
+CONFIG_MV_PON_TXQ_DEF=0
+
+#
+# Switch support
+#
+CONFIG_MV_ETH_SWITCH=y
+CONFIG_MV_ETH_SWITCH_NETDEV_NUM=6
+CONFIG_MV_ETH_SWITCH_NETCONFIG_0="3,(00:11:66:11:66:11,0)(00:22:77:22:77:22,1:2:3:4),mtu=1500"
+CONFIG_MV_ETH_SWITCH_NETCONFIG_1="0"
+CONFIG_MV_ETH_SWITCH_LINK=y
+
+#
+# ERRATA / WA
+#
+
+#
+# Telephony options
+#
+CONFIG_MV_PHONE=y
+CONFIG_MV_TDM_SUPPORT=y
+# CONFIG_MV_COMM_UNIT_SUPPORT is not set
+# CONFIG_SILABS_SLIC_SUPPORT is not set
+CONFIG_ZARLINK_SLIC_SUPPORT=y
+CONFIG_ZARLINK_SLIC_VE880=y
+# CONFIG_ZARLINK_SLIC_VE890 is not set
+# CONFIG_ZARLINK_SLIC_VE792 is not set
+CONFIG_MV_TDM_PCM_CLK_8MHZ=y
+# CONFIG_MV_TDM_PCM_CLK_4MHZ is not set
+# CONFIG_MV_TDM_PCM_CLK_2MHZ is not set
+CONFIG_MV_TDM_USE_INTERNAL_PCLK_SOURCE=y
+# CONFIG_MV_TDM_USE_EXTERNAL_PCLK_SOURCE is not set
+# CONFIG_MV_TDM_USE_DCO is not set
+CONFIG_MV_TDM_DUMMY=y
+# CONFIG_MV_PHONE_USE_IRQ_PROCESSING is not set
+# CONFIG_MV_PHONE_USE_FIQ_PROCESSING is not set
+CONFIG_MV_PHONE_USE_SLIC_LIBS=y
+
+#
+# SoC CUST support
+#
+CONFIG_MV_CUST=y
+CONFIG_MV_CUST_IGMP_HANDLE=y
+# CONFIG_MV_CUST_UDP_SAMPLE_HANDLE is not set
+# CONFIG_MV_CUST_FLOW_MAP_HANDLE is not set
+
+#
+# SoC PON support
+#
+CONFIG_MV_PON_TCONTS=8
+CONFIG_MV_EPON_LLID=1
+# CONFIG_PON_Z1 is not set
+CONFIG_PON_Z2=y
+# CONFIG_PON_FPGA is not set
+CONFIG_MV_GPON=y
+CONFIG_MV_EPON=y
+
+#
+# GPON Driver Options
+#
+CONFIG_MV_GPON_HW_INTERRUPT=y
+CONFIG_MV_GPON_DEBUG_PRINT=y
+CONFIG_MV_GPON_STATIC_GEM_PORT=y
+# CONFIG_MV_GPON_PERFORMANCE_CHECK is not set
+
+#
+# EPON Driver Options
+#
+CONFIG_MV_EPON_HW_INTERRUPT=y
+CONFIG_MV_EPON_DBA_LOW_RATE_VALUE=2000
+CONFIG_MV_EPON_DBA_LOW_RATE_THRESHOLD=20
+CONFIG_MV_EPON_DBA_LOW_RATE_CONST_VALUE=256
+CONFIG_MV_EPON_DBA_HIGH_RATE_THRESHOLD=8192
+CONFIG_MV_EPON_DBA_HIGH_RATE_VALUE=2000
+
+#
+# SoC TPM support
+#
+CONFIG_MV_TPM=y
+
+#
+# TPM Driver Options
+#
+# CONFIG_MV_TPM_Z1_VER is not set
+CONFIG_MV_TPM_Z2_VER=y
+# CONFIG_MV_TPM_FPGA_VER is not set
+CONFIG_MV_TPM_INT_LOCK=y
+# CONFIG_MV_TPM_DEBUG_PRINT is not set
+# CONFIG_MV_TPM_SFS_2_IOCTL is not set
+CONFIG_MV_TPM_SYSFS_HELP=y
+
+#
+# SoC MAC learning support
+#
+CONFIG_MV_MAC_LEARN=y
+# CONFIG_PCIE_VIRTUAL_BRIDGE_SUPPORT is not set
+# CONFIG_MV_UART_POLLING_MODE is not set
+# CONFIG_MV_PRINTK_SLICE_SUPPORT is not set
+CONFIG_ARCH_FEROCEON=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_FEROCEON=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_ARMV5_L2_CACHE_COHERENCY_FIX=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+CONFIG_REORDER=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 log_buf_len=1048576"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_FEROCEON_KW2 is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_CMD="nand_mtd:0x200000@0x0(uboot)ro,0x400000@0x200000(uimageU),-@0x600000(rootfsU)"
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=24576
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MV_SCATTERED_SPINUP is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000E=y
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_SK98LIN=y
+# CONFIG_SK98LIN_NAPI is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=y
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+# CONFIG_PHONE_IXJ is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_MVSDIO=y
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+# CONFIG_UDF_NLS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_LZMA=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZMA_NEEDED=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mv88f6601_defconfig b/arch/arm/configs/mv88f6601_defconfig
new file mode 100755
index 0000000..fcc4a17
--- /dev/null
+++ b/arch/arm/configs/mv88f6601_defconfig
@@ -0,0 +1,1643 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32.11
+# Sun Sep  2 08:35:19 2012
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_FEROCEON_ORION is not set
+# CONFIG_ARCH_FEROCEON_KW is not set
+CONFIG_ARCH_FEROCEON_KW2=y
+# CONFIG_ARCH_FEROCEON_MV78XX0 is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# Feroceon SoC options
+#
+CONFIG_MV88F6500=y
+# CONFIG_JTAG_DEBUG is not set
+
+#
+# Feroceon SoC Included Features
+#
+CONFIG_MV_NAND_SUPPORT=y
+CONFIG_MV_INCLUDE_PEX=y
+CONFIG_MV_INCLUDE_USB=y
+CONFIG_MV_INCLUDE_XOR=y
+# CONFIG_MV_INCLUDE_CESA is not set
+# CONFIG_MV_INCLUDE_NFC is not set
+CONFIG_MV_INCLUDE_LEGACY_NAND=y
+# CONFIG_MV_INCLUDE_INTEG_SATA is not set
+CONFIG_MV_INCLUDE_TDM=y
+CONFIG_MV_INCLUDE_GIG_ETH=y
+CONFIG_MV_INCLUDE_SPI=y
+CONFIG_MV_INCLUDE_SDIO=y
+# CONFIG_MV_INCLUDE_TS is not set
+CONFIG_MV_INCLUDE_PON=y
+CONFIG_MV_INCLUDE_TPM=y
+CONFIG_MV_INCLUDE_CUST=y
+CONFIG_MV_INCLUDE_SWITCH=y
+CONFIG_MV_GPP_MAX_PINS=70
+CONFIG_MV_DCACHE_SIZE=0x4000
+CONFIG_MV_ICACHE_SIZE=0x4000
+
+#
+# Feroceon SoC MTD support
+#
+CONFIG_MV_FLASH_CTRL=y
+CONFIG_MV_INCLUDE_SFLASH_MTD=y
+# CONFIG_MTD_NAND_LNC is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+CONFIG_USE_DSP=y
+CONFIG_MV_SP_I_FTCH_DB_INV=y
+# CONFIG_MV_SP_I_FTCH_LCK_L2_ICACHE is not set
+# CONFIG_MV_SP_I_FTCH_NONE is not set
+# CONFIG_MV_INTERNAL_REGS_SELECTIVE_MAPPING is not set
+CONFIG_FEROCEON_PROC=y
+CONFIG_UBOOT_STRUCT=y
+# CONFIG_MV_DBG_TRACE is not set
+CONFIG_MV_REAL_TIME=y
+# CONFIG_MV_CPU_PERF_CNTRS is not set
+# CONFIG_MV_CPU_L2_PERF_CNTRS is not set
+
+#
+# Power-Management options
+#
+CONFIG_MV_PMU_PROC=y
+CONFIG_MV_PM_IDLE_WFI_SR=y
+# CONFIG_MV_PM_IDLE_DEEPIDLE_SR is not set
+
+#
+# Soc DMA accelerations
+#
+# CONFIG_MV_USE_XOR_ENGINE is not set
+
+#
+# SoC Networking support
+#
+CONFIG_MV_ETHERNET=y
+# CONFIG_MV_ETH_LEGACY is not set
+CONFIG_MV_ETH_NETA=y
+CONFIG_MV_ETH_PORTS_NUM=3
+CONFIG_MV_ETH_0_MTU=1500
+CONFIG_MV_ETH_0_MACADDR="00:00:00:00:00:80"
+CONFIG_MV_ETH_1_MTU=1500
+CONFIG_MV_ETH_1_MACADDR="00:00:00:00:00:81"
+CONFIG_MV_ETH_2_MTU=1500
+CONFIG_MV_ETH_2_MACADDR="00:00:00:00:00:82"
+CONFIG_MV_ETH_RXQ=8
+CONFIG_MV_ETH_TXQ=8
+# CONFIG_MV_ETH_TSO is not set
+CONFIG_MV_ETH_TOOL=y
+# CONFIG_MV_LINUX_COUNTERS_DISABLE is not set
+CONFIG_NET_SKB_HEADROOM=96
+CONFIG_NET_SKB_RECYCLE=y
+CONFIG_NET_SKB_RECYCLE_DEF=1
+# CONFIG_MV_ETH_NFP is not set
+
+#
+# BM configuration
+#
+CONFIG_MV_ETH_BM=y
+# CONFIG_MV_ETH_BM_CPU is not set
+CONFIG_MV_ETH_BM_0_PKT_SIZE=2016
+CONFIG_MV_ETH_BM_1_PKT_SIZE=256
+CONFIG_MV_ETH_BM_2_PKT_SIZE=2016
+CONFIG_MV_ETH_BM_3_PKT_SIZE=256
+CONFIG_MV_ETH_BM_PORT_0=y
+CONFIG_MV_ETH_BM_PORT_0_LONG_POOL=0
+CONFIG_MV_ETH_BM_PORT_0_SHORT_POOL=1
+CONFIG_MV_ETH_BM_PORT_0_LONG_BUF_NUM=2048
+CONFIG_MV_ETH_BM_PORT_0_SHORT_BUF_NUM=4096
+CONFIG_MV_ETH_BM_PORT_1=y
+CONFIG_MV_ETH_BM_PORT_1_LONG_POOL=0
+CONFIG_MV_ETH_BM_PORT_1_SHORT_POOL=1
+CONFIG_MV_ETH_BM_PORT_1_LONG_BUF_NUM=2048
+CONFIG_MV_ETH_BM_PORT_1_SHORT_BUF_NUM=4096
+CONFIG_MV_ETH_BM_PORT_2=y
+CONFIG_MV_ETH_BM_PORT_2_LONG_POOL=2
+CONFIG_MV_ETH_BM_PORT_2_SHORT_POOL=3
+CONFIG_MV_ETH_BM_PORT_2_LONG_BUF_NUM=2048
+CONFIG_MV_ETH_BM_PORT_2_SHORT_BUF_NUM=4096
+CONFIG_MV_ETH_PNC=y
+CONFIG_MV_PNC_TCAM_LINES=512
+CONFIG_MV_ETH_PNC_MCAST_NUM=8
+CONFIG_MV_ETH_PNC_VLAN_PRIO=7
+CONFIG_MV_ETH_PNC_ETYPE=0
+CONFIG_MV_ETH_PNC_DSCP_PRIO=4
+# CONFIG_MV_ETH_PNC_L3_FLOW is not set
+# CONFIG_MV_ETH_PNC_WOL is not set
+CONFIG_MV_ETH_HWF=y
+CONFIG_MV_ETH_HWF_TXQ_DROP=60
+CONFIG_MV_ETH_HWF_TXQ_DROP_RND=0
+CONFIG_MV_ETH_PMT=y
+CONFIG_MV_ETH_PMT_FLOWS=256
+CONFIG_MV_ETH_PMT_CMD_PER_FLOW=12
+
+#
+# Network Interface configuration
+#
+
+#
+# Rx/Tx Queue configuration
+#
+CONFIG_MV_ETH_RXQ_DESC=128
+CONFIG_MV_ETH_RXQ_DEF=0
+CONFIG_MV_ETH_TXQ_DESC=3072
+CONFIG_MV_ETH_TXQ_DEF=0
+
+#
+# IP/TCP/UDP Offloading
+#
+CONFIG_MV_ETH_TX_CSUM_OFFLOAD=y
+CONFIG_MV_ETH_TX_CSUM_OFFLOAD_DEF=y
+CONFIG_MV_ETH_RX_CSUM_OFFLOAD=y
+CONFIG_MV_ETH_RX_CSUM_OFFLOAD_DEF=y
+# CONFIG_MV_ETH_GRO is not set
+
+#
+# Control and Statistics
+#
+CONFIG_MV_ETH_DEBUG_CODE=y
+CONFIG_MV_ETH_STAT_ERR=y
+CONFIG_MV_ETH_STAT_INF=y
+CONFIG_MV_ETH_STAT_DBG=y
+# CONFIG_MV_ETH_STAT_DIST is not set
+
+#
+# Advanced Features
+#
+CONFIG_MV_ETH_TX_DONE_TIMER_PERIOD=10
+CONFIG_MV_ETH_CLEANUP_TIMER_PERIOD=10
+# CONFIG_MV_ETH_TXDONE_ISR is not set
+CONFIG_MV_ETH_TXDONE_COAL_PKTS=16
+CONFIG_MV_ETH_RX_COAL_PKTS=32
+CONFIG_MV_ETH_RX_COAL_USEC=100
+# CONFIG_MV_ETH_RX_DESC_PREFETCH is not set
+# CONFIG_MV_ETH_RX_PKT_PREFETCH is not set
+CONFIG_MV_ETH_RX_SPECIAL=y
+CONFIG_MV_ETH_TX_SPECIAL=y
+# CONFIG_MV_ETH_L2FW is not set
+CONFIG_MV_ETH_RX_POLL_WEIGHT=64
+CONFIG_MV_ETH_EXTRA_BUF_SIZE=120
+CONFIG_MV_ETH_EXTRA_BUF_NUM=3072
+
+#
+# NFP support
+#
+
+#
+# NAPI GROUPS
+#
+CONFIG_MV_ETH_NAPI_GROUPS=1
+
+#
+# Group 0
+#
+CONFIG_MV_ETH_GROUP0_CPU=0x1
+CONFIG_MV_ETH_GROUP0_RXQ=0xff
+
+#
+# PON support for Network driver
+#
+CONFIG_MV_PON=y
+CONFIG_MV_PON_TXP_DEF=0
+CONFIG_MV_PON_TXQ_DEF=0
+
+#
+# Switch support
+#
+CONFIG_MV_ETH_SWITCH=y
+CONFIG_MV_ETH_SWITCH_NETDEV_NUM=6
+CONFIG_MV_ETH_SWITCH_NETCONFIG_0="3,(00:11:66:11:66:11,0)(00:22:77:22:77:22,1:2:3:4),mtu=1500"
+CONFIG_MV_ETH_SWITCH_NETCONFIG_1="0"
+CONFIG_MV_ETH_SWITCH_LINK=y
+
+#
+# ERRATA / WA
+#
+
+#
+# Telephony options
+#
+CONFIG_MV_PHONE=y
+CONFIG_MV_TDM_SUPPORT=y
+# CONFIG_MV_COMM_UNIT_SUPPORT is not set
+# CONFIG_SILABS_SLIC_SUPPORT is not set
+CONFIG_ZARLINK_SLIC_SUPPORT=y
+CONFIG_ZARLINK_SLIC_VE880=y
+# CONFIG_ZARLINK_SLIC_VE890 is not set
+# CONFIG_ZARLINK_SLIC_VE792 is not set
+CONFIG_MV_TDM_PCM_CLK_8MHZ=y
+# CONFIG_MV_TDM_PCM_CLK_4MHZ is not set
+# CONFIG_MV_TDM_PCM_CLK_2MHZ is not set
+CONFIG_MV_TDM_USE_INTERNAL_PCLK_SOURCE=y
+# CONFIG_MV_TDM_USE_EXTERNAL_PCLK_SOURCE is not set
+# CONFIG_MV_TDM_USE_DCO is not set
+CONFIG_MV_TDM_DUMMY=y
+# CONFIG_MV_PHONE_USE_IRQ_PROCESSING is not set
+# CONFIG_MV_PHONE_USE_FIQ_PROCESSING is not set
+CONFIG_MV_PHONE_USE_SLIC_LIBS=y
+
+#
+# SoC CUST support
+#
+CONFIG_MV_CUST=y
+CONFIG_MV_CUST_IGMP_HANDLE=y
+# CONFIG_MV_CUST_UDP_SAMPLE_HANDLE is not set
+# CONFIG_MV_CUST_FLOW_MAP_HANDLE is not set
+
+#
+# SoC PON support
+#
+CONFIG_MV_PON_TCONTS=8
+CONFIG_MV_EPON_LLID=1
+# CONFIG_PON_Z1 is not set
+CONFIG_PON_Z2=y
+# CONFIG_PON_FPGA is not set
+CONFIG_MV_GPON=y
+CONFIG_MV_EPON=y
+
+#
+# GPON Driver Options
+#
+CONFIG_MV_GPON_HW_INTERRUPT=y
+CONFIG_MV_GPON_DEBUG_PRINT=y
+CONFIG_MV_GPON_STATIC_GEM_PORT=y
+# CONFIG_MV_GPON_PERFORMANCE_CHECK is not set
+
+#
+# EPON Driver Options
+#
+CONFIG_MV_EPON_HW_INTERRUPT=y
+CONFIG_MV_EPON_DBA_LOW_RATE_VALUE=2000
+CONFIG_MV_EPON_DBA_LOW_RATE_THRESHOLD=20
+CONFIG_MV_EPON_DBA_LOW_RATE_CONST_VALUE=256
+CONFIG_MV_EPON_DBA_HIGH_RATE_THRESHOLD=8192
+CONFIG_MV_EPON_DBA_HIGH_RATE_VALUE=2000
+
+#
+# SoC TPM support
+#
+CONFIG_MV_TPM=y
+
+#
+# TPM Driver Options
+#
+# CONFIG_MV_TPM_Z1_VER is not set
+CONFIG_MV_TPM_Z2_VER=y
+# CONFIG_MV_TPM_FPGA_VER is not set
+CONFIG_MV_TPM_INT_LOCK=y
+# CONFIG_MV_TPM_DEBUG_PRINT is not set
+# CONFIG_MV_TPM_SFS_2_IOCTL is not set
+CONFIG_MV_TPM_SYSFS_HELP=y
+
+#
+# SoC MAC learning support
+#
+CONFIG_MV_MAC_LEARN=y
+# CONFIG_PCIE_VIRTUAL_BRIDGE_SUPPORT is not set
+# CONFIG_MV_UART_POLLING_MODE is not set
+# CONFIG_MV_PRINTK_SLICE_SUPPORT is not set
+CONFIG_ARCH_FEROCEON=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_FEROCEON=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_ARMV5_L2_CACHE_COHERENCY_FIX=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+CONFIG_REORDER=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_FEROCEON_KW2 is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_CMD="nand_mtd:0x200000@0x0(uboot)ro,0x400000@0x200000(uimageU),-@0x600000(rootfsU)"
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=24576
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MV_SCATTERED_SPINUP is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000E=y
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_SK98LIN=y
+# CONFIG_SK98LIN_NAPI is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=y
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+# CONFIG_PHONE_IXJ is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_MVSDIO=y
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+# CONFIG_UDF_NLS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_LZMA=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZMA_NEEDED=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/mach-feroceon-kw2/Kconfig b/arch/arm/mach-feroceon-kw2/Kconfig
index 2620b16..78a5be7 100755
--- a/arch/arm/mach-feroceon-kw2/Kconfig
+++ b/arch/arm/mach-feroceon-kw2/Kconfig
@@ -11,4 +11,13 @@
 
 endchoice
 
+choice
+	prompt "Feroceon-KW2 board type"
+
+config MACH_GFLT200
+	bool "GFLT200 board"
+	depends on MV88F6500
+
+endchoice
+
 endif
diff --git a/arch/arm/mach-feroceon-kw2/Makefile b/arch/arm/mach-feroceon-kw2/Makefile
index 2368c22..9bf0fd1 100755
--- a/arch/arm/mach-feroceon-kw2/Makefile
+++ b/arch/arm/mach-feroceon-kw2/Makefile
@@ -241,4 +241,6 @@
 feroceon-$(CONFIG_MV_PHONE_USE_FIQ_PROCESSING) += $(LSP_DIR)/fiq.o
 feroceon-$(CONFIG_THERMAL_SENSOR_KW2)	+= hwmon.o
 
+# Board
+obj-$(CONFIG_MACH_GFLT200)		+= board-gflt200.o
 
diff --git a/arch/arm/mach-feroceon-kw2/board-gflt200.c b/arch/arm/mach-feroceon-kw2/board-gflt200.c
new file mode 100644
index 0000000..e7da5ee
--- /dev/null
+++ b/arch/arm/mach-feroceon-kw2/board-gflt200.c
@@ -0,0 +1,55 @@
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysfs.h>
+
+#define BOARD_NAME		"gflt200"
+#define GPIO_BOARD_VER_0	13
+#define GPIO_BOARD_VER_1	15
+#define GPIO_BOARD_VER_2	18
+
+static ssize_t board_hw_ver_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	int hw_ver = gpio_get_value(GPIO_BOARD_VER_0)
+			| (gpio_get_value(GPIO_BOARD_VER_1) << 1)
+			| (gpio_get_value(GPIO_BOARD_VER_2) << 2);
+
+	return sprintf(buf, "%d\n", hw_ver);
+}
+
+static DEVICE_ATTR(hw_ver, S_IRUGO, board_hw_ver_show, NULL);
+
+int __init board_init(void)
+{
+	int rc;
+	struct platform_device *pdev;
+
+	/* /sys/devices/platform/<board_name> */
+	pdev = platform_device_register_simple(BOARD_NAME, -1, NULL, 0);
+	if (IS_ERR(pdev)) {
+		rc = PTR_ERR(pdev);
+		pr_err(BOARD_NAME ": error %d registering device\n", rc);
+		return rc;
+	}
+
+	/* /sys/devices/platform/board -> /sys/devices/platform/<board_name> */
+	rc = sysfs_create_link(&pdev->dev.parent->kobj, &pdev->dev.kobj,
+				"board");
+	if (rc)
+		pr_err(BOARD_NAME ": error %d creating link 'board'\n", rc);
+
+	/* /sys/devices/platform/board/hw_ver */
+	rc = device_create_file(&pdev->dev, &dev_attr_hw_ver);
+	if (rc)
+		pr_err(BOARD_NAME ": error %d creating attribute 'hw_ver'\n",
+			rc);
+
+	return 0;
+}
+
+device_initcall(board_init);
diff --git a/arch/arm/mach-feroceon-kw2/core.c b/arch/arm/mach-feroceon-kw2/core.c
index b416f88..4dcb811 100755
--- a/arch/arm/mach-feroceon-kw2/core.c
+++ b/arch/arm/mach-feroceon-kw2/core.c
@@ -223,7 +223,7 @@
 /* Platform devices list */
 
 static struct mv64xxx_i2c_pdata kw_i2c_pdata = {
-       .freq_m         = 8, /* assumes 166 MHz TCLK */
+       .freq_m         = 12, /* assumes 200 MHz TCLK */
        .freq_n         = 3,
        .timeout        = 1000, /* Default timeout of 1 second */
 };
diff --git a/arch/arm/mach-feroceon-kw2/export.c b/arch/arm/mach-feroceon-kw2/export.c
index a8aed97..db03270 100755
--- a/arch/arm/mach-feroceon-kw2/export.c
+++ b/arch/arm/mach-feroceon-kw2/export.c
@@ -219,6 +219,7 @@
 EXPORT_SYMBOL(mvGppBlinkEn);
 EXPORT_SYMBOL(mvGppTypeSet);
 EXPORT_SYMBOL(mvBoarGpioPinNumGet);
+EXPORT_SYMBOL(mvBoardGpioPolarityGet);
 #endif /* CONFIG_MV_PON */
 
 /*************************************************************************************************************
diff --git a/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvLib.c b/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvLib.c
index 1fdc882..727fe51 100755
--- a/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvLib.c
+++ b/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvLib.c
@@ -154,21 +154,24 @@
 	MV_REG_WRITE(GPP_DATA_OUT_REG(0), BOARD_INFO(boardId)->gppOutValLow);
 	MV_REG_WRITE(GPP_DATA_OUT_REG(1), BOARD_INFO(boardId)->gppOutValMid);
 	if (boardId != DB_88F6601_BP_ID && boardId != RD_88F6601_MC_ID &&
-	    boardId != RD_88F6601_MC2L_ID)
+	   boardId != RD_88F6601_MC2L_ID &&
+	   boardId != GFLT200_ID && boardId != GFLT110_ID)
 		MV_REG_WRITE(GPP_DATA_OUT_REG(2), BOARD_INFO(boardId)->gppOutValHigh);
 
 	/* set GPP polarity */
 	mvGppPolaritySet(0, 0xFFFFFFFF, BOARD_INFO(boardId)->gppPolarityValLow);
 	mvGppPolaritySet(1, 0xFFFFFFFF, BOARD_INFO(boardId)->gppPolarityValMid);
 	if (boardId != DB_88F6601_BP_ID && boardId != RD_88F6601_MC_ID &&
-	    boardId != RD_88F6601_MC2L_ID)
+	   boardId != RD_88F6601_MC2L_ID &&
+	   boardId != GFLT200_ID && boardId != GFLT110_ID)
 		mvGppPolaritySet(2, 0xFFFFFFFF, BOARD_INFO(boardId)->gppPolarityValHigh);
 
 	/* Set GPP Out Enable */
 	mvGppTypeSet(0, 0xFFFFFFFF, BOARD_INFO(boardId)->gppOutEnValLow);
 	mvGppTypeSet(1, 0xFFFFFFFF, BOARD_INFO(boardId)->gppOutEnValMid);
 	if (boardId != DB_88F6601_BP_ID && boardId != RD_88F6601_MC_ID &&
-	    boardId != RD_88F6601_MC2L_ID)
+	    boardId != RD_88F6601_MC2L_ID &&
+	    boardId != GFLT200_ID && boardId != GFLT110_ID)
 		mvGppTypeSet(2, 0xFFFFFFFF, BOARD_INFO(boardId)->gppOutEnValHigh);
 }
 
@@ -346,8 +349,8 @@
 			return MV_TRUE;
 		return MV_FALSE;
 	}
-
-	if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID)
+	if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
+	    GFLT200_ID == boardId || GFLT110_ID == boardId)
 		return MV_FALSE;
 
 	if ((ethPortNum > 0) || (ethCompOpt & ESC_OPT_SGMII_2_SW_P1))
@@ -646,7 +649,8 @@
 		return MV_ERROR;
 	}
 	if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
-	    boardId == DB_88F6601_BP_ID)
+	    boardId == DB_88F6601_BP_ID ||
+            GFLT200_ID == boardId || GFLT110_ID == boardId)
 		return 0;
 
 
@@ -1245,7 +1249,8 @@
 
 	tmpTClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET(0));
 	if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
-	    boardId == DB_88F6601_BP_ID) {
+	    boardId == DB_88F6601_BP_ID ||
+	    GFLT200_ID == boardId || GFLT110_ID == boardId) {
 		tmpTClkRate &= MSAR_TCLCK_6601_MASK;
 		if (tmpTClkRate)
 			return MV_BOARD_TCLK_200MHZ;
@@ -1301,7 +1306,8 @@
 	clockSatr = MSAR_CPU_DDR_L2_CLCK_EXTRACT(sar0);
 	i = 0;
 	if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
-	    boardId == DB_88F6601_BP_ID) {
+	    boardId == DB_88F6601_BP_ID ||
+	    GFLT200_ID == boardId || GFLT110_ID == boardId) {
 		while (cpuDdrTbl6601[i].satrValue != -1) {
 			if (cpuDdrTbl6601[i].satrValue == clockSatr) {
 				res = i;
@@ -1419,7 +1425,8 @@
 	boardId = mvBoardIdGet();
 
 	if (!((boardId >= BOARD_ID_BASE) && (boardId < MV_MAX_BOARD_ID))) {
-		mvOsPrintf("mvBoardRTCGpioPinGet:Board unknown.\n");
+		mvOsPrintf("mvBoardRTCGpioPinGet:Board unknown - id %d\n",
+				boardId);
 		return MV_ERROR;
 	}
 
@@ -1433,6 +1440,25 @@
 	return MV_ERROR;
 }
 
+MV_32 mvBoardGpioPolarityGet(MV_BOARD_GPP_CLASS gppClass)
+{
+	MV_U32 boardId, i;
+
+	boardId = mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE) && (boardId < MV_MAX_BOARD_ID))) {
+		mvOsPrintf("mvBoardGpioPolarityGet:Board unknown - id %d\n",
+				boardId);
+		return MV_ERROR;
+	}
+
+	for (i = 0; i < BOARD_INFO(boardId)->numBoardGppInfo; i++) {
+		if (BOARD_INFO(boardId)->pBoardGppInfo[i].devClass == gppClass)
+			return !BOARD_INFO(boardId)->pBoardGppInfo[i].activeLow;
+	}
+	return MV_ERROR;
+}
+
 /*******************************************************************************
 * mvBoardReset - mvBoardReset
 *
@@ -1690,7 +1716,8 @@
 	BOARD_INFO(boardId)->pBoardMppTypeValue->ethSataComplexOpt = ethConfig;
 
 	if (boardId != DB_88F6601_BP_ID && boardId != RD_88F6601_MC_ID &&
-	    boardId != RD_88F6601_MC2L_ID) {
+	    boardId != RD_88F6601_MC2L_ID &&
+	    boardId != GFLT200_ID && boardId != GFLT110_ID) {
 		/* KW2 only */
 		/* Update link speed for MAC0 / 1 */
 		/* If MAC 0 is connected to switch, then set to speed 1000Mbps */
@@ -2321,7 +2348,8 @@
 			return MV_TRUE;
 		return MV_FALSE;
 	}
-	if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID) {
+	if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
+	    GFLT200_ID == boardId || GFLT110_ID == boardId) {
 		if (ethPortNum == 0)
 			return MV_TRUE;
 		return MV_FALSE;
@@ -2727,6 +2755,10 @@
 
 #elif defined(DB_CUSTOMER)
 		tmpBoardId = DB_CUSTOMER_ID;
+#elif defined(GFLT200)
+		tmpBoardId = GFLT200_ID;
+#elif defined(GFLT110)
+		tmpBoardId = GFLT110_ID;
 #endif
 		gBoardId = tmpBoardId;
 	}
@@ -3538,4 +3570,3 @@
 
 	return BOARD_INFO(boardId)->moduleAutoDetect;
 }
-
diff --git a/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvLib.h b/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvLib.h
index 1a2df45..56140a8 100755
--- a/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvLib.h
+++ b/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvLib.h
@@ -345,6 +345,7 @@
 typedef struct _boardGppInfo {
 	MV_BOARD_GPP_CLASS devClass;
 	MV_U8 gppPinNum;
+	MV_U8 activeLow;
 } MV_BOARD_GPP_INFO;
 
 typedef struct _boardTwsiInfo {
@@ -508,6 +509,7 @@
 MV_U32 mvBoardDebugLedNumGet(MV_U32 boardId);
 MV_VOID mvBoardDebugLed(MV_U32 hexNum);
 MV_32 mvBoarGpioPinNumGet(MV_BOARD_GPP_CLASS class, MV_U32 index);
+MV_32 mvBoardGpioPolarityGet(MV_BOARD_GPP_CLASS class);
 MV_VOID mvBoardReset(MV_VOID);
 MV_32 mvBoardResetGpioPinGet(MV_VOID);
 MV_32 mvBoardSDIOGpioPinGet(MV_BOARD_GPP_CLASS type);
diff --git a/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.c b/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.c
index 0178227..c8e2400 100755
--- a/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.c
+++ b/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.c
@@ -1281,7 +1281,268 @@
 
 MV_BOARD_INFO dbCustomerInfo = { };
 
+/***************************************************************************
+** GFLT200 Prism
+****************************************************************************/
+/* NAND not supported  */
 
+MV_BOARD_TWSI_INFO gflt200InfoBoardTwsiDev[] = {
+	/* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */
+};
+
+MV_BOARD_MAC_INFO gflt200InfoBoardMacInfo[] = {
+	/* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+	{BOARD_MAC_SPEED_AUTO, 0x0},
+	{BOARD_MAC_SPEED_AUTO, 0x1},
+	{N_A,N_A}
+};
+
+MV_BOARD_MPP_TYPE_INFO gflt200InfoBoardMppTypeInfo[] = {
+	{
+		.boardMppTdm = MV_BOARD_AUTO,
+		.ethSataComplexOpt = ESC_OPT_GEPHY_MAC0,
+		.ethPortsMode = 0x0
+	}
+};
+
+MV_BOARD_GPP_INFO gflt200InfoBoardGppInfo[] = {
+	/* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */
+	/*{BOARD_GPP_PON_XVR_TX, 17, 0},*/
+	/*{BOARD_GPP_PON_XVR_TX_IND, 24, 0},*/
+	{BOARD_GPP_PON_XVR_TX, 21, 1},
+	{BOARD_GPP_PON_XVR_TX_POWER, 37, 1},
+};
+
+MV_DEV_CS_INFO gflt200InfoBoardDeCsInfo[] = {
+	/*{deviceCS, params, devType, devWidth} */
+#ifdef MV_SPI
+	{SPI_CS0, N_A, BOARD_DEV_SPI_FLASH, 8},		/* SPI DEV */
+#endif
+#if !defined(MV_SPI)
+	{N_A, N_A, N_A, N_A}			/* No device */
+#endif
+};
+
+MV_BOARD_MPP_INFO gflt200InfoBoardMppConfigValue[] = {
+	{{
+	  GFLT200_MPP0_7,
+	  GFLT200_MPP8_15,
+	  GFLT200_MPP16_23,
+	  GFLT200_MPP24_31,
+	  GFLT200_MPP32_37
+	  }
+	 }
+};
+
+/*
+MV_BOARD_SPEC_INIT gflt200BoardSpecInit[] = {
+	{
+		.reg = PMU_POWER_IF_POLARITY_REG,
+		.mask = (BIT1),
+		.val = 0
+	},
+	{
+		.reg = TBL_TERM,
+		.val = TBL_TERM
+	}
+};
+*/
+MV_BOARD_INFO gflt200Info = {
+	.boardName = "GFLT200",
+	.numBoardMppTypeValue = MV_ARRAY_SIZE(gflt200InfoBoardMppTypeInfo),
+	.pBoardMppTypeValue = gflt200InfoBoardMppTypeInfo,
+	.numBoardMppConfigValue = MV_ARRAY_SIZE(gflt200InfoBoardMppConfigValue),
+	.pBoardMppConfigValue = gflt200InfoBoardMppConfigValue,
+	.intsGppMaskLow = 0,
+	.intsGppMaskMid = 0,
+	.intsGppMaskHigh = 0,
+	.numBoardDeviceIf = MV_ARRAY_SIZE(gflt200InfoBoardDeCsInfo),
+	.pDevCsInfo = gflt200InfoBoardDeCsInfo,
+	.numBoardTwsiDev = MV_ARRAY_SIZE(gflt200InfoBoardTwsiDev),
+	.pBoardTwsiDev = gflt200InfoBoardTwsiDev,
+	.numBoardMacInfo = MV_ARRAY_SIZE(gflt200InfoBoardMacInfo),
+	.pBoardMacInfo = gflt200InfoBoardMacInfo,
+	.numBoardGppInfo = MV_ARRAY_SIZE(gflt200InfoBoardGppInfo),
+	.pBoardGppInfo = gflt200InfoBoardGppInfo,
+	.activeLedsNumber = 0,
+	.pLedGppPin = NULL,
+	.ledsPolarity = 0,
+
+	/* GPP values */
+	.gppOutEnValLow = GFLT200_GPP_OUT_ENA_LOW,
+	.gppOutEnValMid = GFLT200_GPP_OUT_ENA_MID,
+	.gppOutEnValHigh = 0,
+	.gppOutValLow = GFLT200_GPP_OUT_VAL_LOW,
+	.gppOutValMid = GFLT200_GPP_OUT_VAL_MID,
+	.gppOutValHigh = 0,
+	.gppPolarityValLow = GFLT200_GPP_POL_LOW,
+	.gppPolarityValMid = GFLT200_GPP_POL_MID,
+	.gppPolarityValHigh = 0,
+
+	/* External Switch Configuration */
+	.pSwitchInfo = NULL,
+	.switchInfoNum = 0,
+
+	/* PON configuration. */
+	.ponConfigValue = BOARD_PON_NONE,
+
+	/* TDM configuration */
+	/* We hold a different configuration array for each possible slic that
+	 ** can be connected to board.
+	 ** When modules are scanned, then we select the index of the relevant
+	 ** slic's information array.
+	 ** For RD and Customers boards we only need to initialize a single
+	 ** entry of the arrays below, and set the boardTdmInfoIndex to 0.
+	 */
+	.numBoardTdmInfo = {0},
+	.pBoardTdmInt2CsInfo = {NULL},
+	.boardTdmInfoIndex = -1,
+
+	.pBoardSpecInit = NULL,			/* gflt200BoardSpecInit, */
+
+	.deepIdlePwrUpDelay = 2400,	/* 12uS */
+
+	/* NAND init params */
+	.nandFlashParamsValid = MV_FALSE,
+	.nandFlashReadParams = 0,
+	.nandFlashWriteParams = 0,
+	.nandFlashControl = 0,
+	.pBoardTdmSpiInfo = NULL,
+
+	/* Enable modules auto-detection. */
+	.moduleAutoDetect = MV_FALSE
+};
+
+/***************************************************************************
+** GFLT110
+****************************************************************************/
+/* NAND not supported  */
+
+MV_BOARD_TWSI_INFO gflt110InfoBoardTwsiDev[] = {
+	/* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */
+};
+
+MV_BOARD_MAC_INFO gflt110InfoBoardMacInfo[] = {
+	/* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+	{BOARD_MAC_SPEED_AUTO, 0x0},
+	{BOARD_MAC_SPEED_AUTO, 0x1},
+	{N_A,N_A}
+};
+
+MV_BOARD_MPP_TYPE_INFO gflt110InfoBoardMppTypeInfo[] = {
+	{
+		.boardMppTdm = MV_BOARD_AUTO,
+		.ethSataComplexOpt = ESC_OPT_GEPHY_MAC0,
+		.ethPortsMode = 0x0
+	}
+};
+
+MV_BOARD_GPP_INFO gflt110InfoBoardGppInfo[] = {
+	/* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */
+	{BOARD_GPP_PON_XVR_TX, 17},
+	{BOARD_GPP_PON_XVR_TX_POWER, 37},
+	{BOARD_GPP_PON_XVR_TX_IND, 24},
+};
+
+MV_DEV_CS_INFO gflt110InfoBoardDeCsInfo[] = {
+	/*{deviceCS, params, devType, devWidth} */
+#ifdef MV_SPI
+	{SPI_CS0, N_A, BOARD_DEV_SPI_FLASH, 8},		/* SPI DEV */
+#endif
+#if !defined(MV_SPI)
+	{N_A, N_A, N_A, N_A}			/* No device */
+#endif
+};
+
+MV_BOARD_MPP_INFO gflt110InfoBoardMppConfigValue[] = {
+	{{
+	  RD_88F6601_MPP0_7,
+	  RD_88F6601_MPP8_15,
+	  RD_88F6601_MPP16_23,
+	  RD_88F6601_MPP24_31,
+	  RD_88F6601_MPP32_37
+	  }
+	 }
+};
+
+/*
+MV_BOARD_SPEC_INIT gflt110BoardSpecInit[] = {
+	{
+		.reg = PMU_POWER_IF_POLARITY_REG,
+		.mask = (BIT1),
+		.val = 0
+	},
+	{
+		.reg = TBL_TERM,
+		.val = TBL_TERM
+	}
+};
+*/
+MV_BOARD_INFO gflt110Info = {
+	.boardName = "GFLT110",
+	.numBoardMppTypeValue = MV_ARRAY_SIZE(gflt110InfoBoardMppTypeInfo),
+	.pBoardMppTypeValue = gflt110InfoBoardMppTypeInfo,
+	.numBoardMppConfigValue = MV_ARRAY_SIZE(gflt110InfoBoardMppConfigValue),
+	.pBoardMppConfigValue = gflt110InfoBoardMppConfigValue,
+	.intsGppMaskLow = 0,
+	.intsGppMaskMid = 0,
+	.intsGppMaskHigh = 0,
+	.numBoardDeviceIf = MV_ARRAY_SIZE(gflt110InfoBoardDeCsInfo),
+	.pDevCsInfo = gflt110InfoBoardDeCsInfo,
+	.numBoardTwsiDev = MV_ARRAY_SIZE(gflt110InfoBoardTwsiDev),
+	.pBoardTwsiDev = gflt110InfoBoardTwsiDev,
+	.numBoardMacInfo = MV_ARRAY_SIZE(gflt110InfoBoardMacInfo),
+	.pBoardMacInfo = gflt110InfoBoardMacInfo,
+	.numBoardGppInfo = MV_ARRAY_SIZE(gflt110InfoBoardGppInfo),
+	.pBoardGppInfo = gflt110InfoBoardGppInfo,
+	.activeLedsNumber = 0,
+	.pLedGppPin = NULL,
+	.ledsPolarity = 0,
+
+	/* GPP values */
+	.gppOutEnValLow = RD_88F6601_GPP_OUT_ENA_LOW,
+	.gppOutEnValMid = RD_88F6601_GPP_OUT_ENA_MID,
+	.gppOutEnValHigh = 0,
+	.gppOutValLow = RD_88F6601_GPP_OUT_VAL_LOW,
+	.gppOutValMid = RD_88F6601_GPP_OUT_VAL_MID,
+	.gppOutValHigh = 0,
+	.gppPolarityValLow = RD_88F6601_GPP_POL_LOW,
+	.gppPolarityValMid = RD_88F6601_GPP_POL_MID,
+	.gppPolarityValHigh = 0,
+
+	/* External Switch Configuration */
+	.pSwitchInfo = NULL,
+	.switchInfoNum = 0,
+
+	/* PON configuration. */
+	.ponConfigValue = BOARD_GPON_CONFIG,
+
+	/* TDM configuration */
+	/* We hold a different configuration array for each possible slic that
+	 ** can be connected to board.
+	 ** When modules are scanned, then we select the index of the relevant
+	 ** slic's information array.
+	 ** For RD and Customers boards we only need to initialize a single
+	 ** entry of the arrays below, and set the boardTdmInfoIndex to 0.
+	 */
+	.numBoardTdmInfo = {0},
+	.pBoardTdmInt2CsInfo = {NULL},
+	.boardTdmInfoIndex = -1,
+
+	.pBoardSpecInit = NULL,			/* gflt110BoardSpecInit, */
+
+	.deepIdlePwrUpDelay = 2400,	/* 12uS */
+
+	/* NAND init params */
+	.nandFlashParamsValid = MV_FALSE,
+	.nandFlashReadParams = 0,
+	.nandFlashWriteParams = 0,
+	.nandFlashControl = 0,
+	.pBoardTdmSpiInfo = NULL,
+
+	/* Enable modules auto-detection. */
+	.moduleAutoDetect = MV_FALSE
+};
 
 MV_BOARD_INFO *boardInfoTbl[] = {
 	&db88f6535Info,
@@ -1291,7 +1552,7 @@
 	&db88f6560PCACPInfo,
 	&db88f6601Info,
 	&rd88f6601Info,
+	&gflt200Info,
+	&gflt110Info,
 	&rd88f6601MC2LInfo,
-	&dbCustomerInfo,
 };
-
diff --git a/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.h b/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.h
index 420a57f..01ccfec 100755
--- a/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.h
+++ b/arch/arm/mach-feroceon-kw2/kw2_family/boardEnv/mvBoardEnvSpec.h
@@ -107,9 +107,20 @@
 #define DB_88F6560_PCAC_ID		(BOARD_ID_BASE+0x4)
 #define DB_88F6601_BP_ID		(BOARD_ID_BASE+0x5)
 #define RD_88F6601_MC_ID		(BOARD_ID_BASE+0x6)
-#define RD_88F6601_MC2L_ID		(BOARD_ID_BASE+0x7)
-#define DB_CUSTOMER_ID			(BOARD_ID_BASE+0x8)
-#define MV_MAX_BOARD_ID			(DB_CUSTOMER_ID + 1)
+// TODO(jnewlin): These ids need to match what is in UBOOT
+// and because Marvell added a new id, things are sort of broken
+// I am leaving the ids the way they were so that _out_ boards
+// work.
+#define DB_CUSTOMER_ID			(BOARD_ID_BASE+0x7)
+#define GFLT200_ID			DB_CUSTOMER_ID
+#define GFLT110_ID			(BOARD_ID_BASE+0x8)
+#define RD_88F6601_MC2L_ID		(BOARD_ID_BASE+0x9)
+#define MV_MAX_BOARD_ID			(DB_CUSTOMER_ID + 3)
+// These are Marvells defines, we should switch to match these in
+// uboot to make future merges easier.
+//#define DB_CUSTOMER_ID			(BOARD_ID_BASE+0x8)
+//#define MV_MAX_BOARD_ID			(DB_CUSTOMER_ID + 1)
+
 
 /***************************************************************************
 ** RD-88F6510-SFU
@@ -458,6 +469,54 @@
 #define RD_88F6601_GPP_POL_MID		0x0
 
 /***************************************************************************
+** GFLT200
+****************************************************************************/
+#define GFLT200_MPP0_7			0x22222220
+#define GFLT200_MPP8_15			0x00000002
+#define GFLT200_MPP16_23		0x00000000
+#define GFLT200_MPP24_31		0x40200000
+#define GFLT200_MPP32_37		0x00000004
+
+/* GPPs
+ 1 SPI_MOSI (out)
+ 2 SPI_SCK (out)
+ 3 SPI_CS_L (out)
+ 4 SPI_MISO (in)
+ 5 I2C_SDA (inout)
+ 6 I2C_SCLK (inout)
+ 7 UART0_TX (out)
+ 8 UART0_RX (in)
+ 9 VDD_MARGIN_EN (out)
+10 VDD_MARGIN_CTRL (out)
+11 PON_LINK_LED (out)
+12 PON_ERROR_LED (out)
+13 BOARD_VER[0] (in)
+15 BOARD_VER[1] (in)
+17 SW_RESET (out)
+18 BOARD_VER[2] (in)
+21 PON_TX_DIS (out)
+23 GE_DATA_LED (out)
+24 GE_LINK_LED (out)
+26 PON_C2_DATA (out)
+27 PON_C2_CLK (out)
+28 SPI_WP_L (out)
+29 PON_RX_LOS (in)
+31 UART1_RX (out)
+32 UART2_TX (in)
+36 PON_RX_PMON (in)
+37 PON_PWR_EN_L (out)
+*/
+
+#define GFLT200_GPP_OUT_ENA_LOW		(BIT13 | BIT15 | BIT18 | BIT29)
+#define GFLT200_GPP_OUT_ENA_MID		(BIT4)
+
+#define GFLT200_GPP_OUT_VAL_LOW		(BIT9 | BIT10 | BIT21 | BIT26 | BIT27 | BIT28)
+#define GFLT200_GPP_OUT_VAL_MID		0x0
+
+#define GFLT200_GPP_POL_LOW		0x0
+#define GFLT200_GPP_POL_MID		0x0
+
+/***************************************************************************
 ** RD-88F6601MC2L
 ****************************************************************************/
 #define RD_88F6601MC2L_MPP0_7		0x22222222
diff --git a/arch/arm/mach-feroceon-kw2/kw2_family/cpu/mvCpu.c b/arch/arm/mach-feroceon-kw2/kw2_family/cpu/mvCpu.c
index 0eb4a47..b20b1cb 100755
--- a/arch/arm/mach-feroceon-kw2/kw2_family/cpu/mvCpu.c
+++ b/arch/arm/mach-feroceon-kw2/kw2_family/cpu/mvCpu.c
@@ -112,7 +112,8 @@
 	/* Search for a matching entry */
 	i = 0;
 	if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
-	    boardId == DB_88F6601_BP_ID) {
+	    boardId == DB_88F6601_BP_ID ||
+	    GFLT200_ID == boardId || GFLT110_ID == boardId) {
 		while (cpuDdrTbl6601[i].satrValue != -1) {
 			if (cpuDdrTbl6601[i].satrValue == clockSatr) {
 				res = i;
@@ -161,7 +162,8 @@
 		return 0;
 	else {
 		if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
-		    boardId == DB_88F6601_BP_ID)
+		    boardId == DB_88F6601_BP_ID ||
+			(GFLT200_ID == boardId) || (GFLT110_ID == boardId))
 			return cpuDdrTbl6601[idx].cpuClk;
 		else
 			return cpuDdrL2Tbl[idx].cpuClk;
@@ -195,7 +197,8 @@
 		return 0;
 	else {
 		if (boardId == RD_88F6601_MC_ID || boardId == RD_88F6601_MC2L_ID ||
-		    boardId == RD_88F6601_MC_ID)
+		    boardId == RD_88F6601_MC_ID ||
+			(GFLT200_ID == boardId) || (GFLT110_ID == boardId))
 			return cpuDdrTbl6601[idx].l2Clk;
 		else
 			return cpuDdrL2Tbl[idx].l2Clk;
@@ -222,7 +225,8 @@
 	MV_U32 id = mvBoardIdGet();
 
 	if (id == RD_88F6510_SFU_ID || id == DB_88F6601_BP_ID ||
-	    id == RD_88F6601_MC_ID || id == RD_88F6601_MC2L_ID)
+	    id == RD_88F6601_MC_ID || id == RD_88F6601_MC2L_ID ||
+	    GFLT200_ID == id || id == GFLT110_ID)
 		return MV_FALSE;
 
 	/* Read S@R register value */
diff --git a/arch/arm/mach-feroceon-kw2/sysmap.c b/arch/arm/mach-feroceon-kw2/sysmap.c
index 9696529..3224c2b 100755
--- a/arch/arm/mach-feroceon-kw2/sysmap.c
+++ b/arch/arm/mach-feroceon-kw2/sysmap.c
@@ -224,6 +224,8 @@
 		case DB_88F6601_BP_ID:
 		case RD_88F6601_MC_ID:
 		case RD_88F6601_MC2L_ID:
+		case GFLT200_ID:
+		case GFLT110_ID:
 			return SYSMAP_88F6601;
 		default:
 			printk("ERROR: can't find system address map\n");
@@ -261,5 +263,3 @@
 
 #endif /* CONFIG_MV_INTERNAL_REGS_SELECTIVE_MAPPING */	
 }
-
-
diff --git a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_mtd/mflash.c b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_mtd/mflash.c
index bd08825..0ae7d1c 100755
--- a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_mtd/mflash.c
+++ b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_mtd/mflash.c
@@ -288,7 +288,7 @@
 		return -1;
 	}
 	
-	printk("\nNotice: Marvell flash (%s) lock per sector is not supported!\n        Locking the whole device.", mtd->name);
+	DB(printk("\nNotice: Marvell flash (%s) lock per sector is not supported!\n        Locking the whole device.", mtd->name));
 		
 	return 0;
 }
@@ -306,7 +306,7 @@
 		return -1;
 	}
 		
-	printk("\nNotice: Marvell flash (%s) unlock per sector is not supported!\n        Unlocking the whole device.", mtd->name);
+	DB(printk("\nNotice: Marvell flash (%s) unlock per sector is not supported!\n        Unlocking the whole device.", mtd->name));
 	return 0;
 }
 
diff --git a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_mtd/sflash.c b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_mtd/sflash.c
index cd7c20a..65eb0f4 100755
--- a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_mtd/sflash.c
+++ b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_mtd/sflash.c
@@ -341,7 +341,7 @@
 	}
 	sflash_enable_irqs(flags, sflash_in_irq);
 	
-	printk("\nNotice: Serial SPI flash (%s) lock per sector is not supported!\n        Locking the whole device.", mtd->name);
+	DB(printk("\nNotice: Serial SPI flash (%s) lock per sector is not supported!\n        Locking the whole device.", mtd->name));
 		
 	return 0;
 }
@@ -364,7 +364,7 @@
 	}
 	sflash_enable_irqs(flags, sflash_in_irq);
 		
-	printk("\nNotice: Serial SPI flash (%s) unlock per sector is not supported!\n        Unlocking the whole device.", mtd->name);
+	DB(printk("\nNotice: Serial SPI flash (%s) unlock per sector is not supported!\n        Unlocking the whole device.", mtd->name));
 	return 0;
 }
 
diff --git a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/core/epon/eponOnuAlrm.c b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/core/epon/eponOnuAlrm.c
index ff48289..9c670b9 100755
--- a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/core/epon/eponOnuAlrm.c
+++ b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/core/epon/eponOnuAlrm.c
@@ -201,6 +201,7 @@
     }
     else /* ((onuEponChangeAlarm & onuEponCurrentAlarmState) == 0) */
     {
+      LINKSTATUSFUNC linkStatusCallback;
       if (onuEponChangeAlarm & ONU_EPON_XVR_SD_MASK)
       {
         mvPonPrint(PON_PRINT_INFO, PON_ALARM_MODULE, 
@@ -215,6 +216,19 @@
 
         onuEponLosAlarm |= 0x02<<8;
       }
+      /* TODO(kedong): There is no OAM message between ONU and OLT, thus the
+       * link will be always down if we don't explicitly bring up the interface.
+       * Here we hook the link status update code to the XVR alarm off code to
+       * always indicate the link up if the XVR signal is detected. Once the
+       * wavelength selection code is ready, we should remove the follow link
+       * status check code.
+       */
+      linkStatusCallback = onuEponDbLinkStatusCallbackGet();
+      if (linkStatusCallback != NULL)
+      {
+        linkStatusCallback(MV_TRUE);
+      }
+      onuPonTxLaserOn(MV_TRUE);
     }
 
     onuEponPreviousAlarm = onuEponCurrentAlarmState;  
diff --git a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/core/epon/eponOnuIsr.c b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/core/epon/eponOnuIsr.c
index 654e56f..11c1a57 100755
--- a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/core/epon/eponOnuIsr.c
+++ b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/core/epon/eponOnuIsr.c
@@ -178,7 +178,12 @@
 	/* ================= */
 
 	if (interruptEvent & ONU_EPON_XVR_SD_MASK) {
-        state = ponXvrFunc(interruptStatus, ONU_EPON_XVR_SD_MASK);
+    //TODO(jnewlin): Make sure this is correct for GFLT200 board.
+		if (GFLT200_ID == mvBoardIdGet()) {
+			state = (interruptStatus & ONU_EPON_XVR_SD_MASK) ? MV_TRUE : MV_FALSE;
+		} else {
+			state = ponXvrFunc(interruptStatus, ONU_EPON_XVR_SD_MASK);
+		}
 		if (state == MV_FALSE)
 		{
 			onuEponDbOnuSignalDetectSet(1); /* alarm is OFF */
@@ -209,7 +214,6 @@
 			mvPonPrint(PON_PRINT_DEBUG, PON_ISR_RAND_MODULE,
 				   "DEBUG: (%s:%d) ResetRandomStateMachine %s\n", __FILE_DESC__, __LINE__);
 			onuEponIsrResetRandomStateMachine();
-
 			/* Call link status callback function */
 			if (onuEponDbModeGet() == E_EPON_IOCTL_P2P_MODE)
 			{
@@ -235,6 +239,50 @@
 				onuEponDbModeSet(E_EPON_IOCTL_STD_MODE);
 			}
             
+
+			/* config PCS synchronization configuration  - FEC disabled */
+			mvOnuEponMacPcsDelaySet(0x1C58);
+			/* clear Rx Ctrl message FIFO */
+			onuEponPonMngIntrRxCtrlFifoCleanup();
+
+#if 0
+// TODO(jnewlin): Double check this merge.
+<<<<<<< HEAD
+		} else if (state == MV_TRUE) { /* alarm is ON */
+
+			/* set EPON mode only if it is not P2P */
+			if (E_EPON_IOCTL_P2P_MODE != onuEponDbModeGet()) {
+				onuEponDbModeSet(E_EPON_IOCTL_STD_MODE);
+			}
+=======
+			/* Call link status callback function */
+			if (onuEponDbModeGet() == E_EPON_IOCTL_P2P_MODE)
+			{
+				linkStatusCallback = onuEponDbLinkStatusCallbackGet();
+				if (linkStatusCallback != NULL)
+				{
+					linkStatusCallback(MV_TRUE);
+					mvPonPrint(PON_PRINT_DEBUG, PON_ISR_INT_MODULE,
+						   "DEBUG: (%s:%d) Notify link is UP\n", __FILE_DESC__, __LINE__);
+				}
+			}
+		}
+		else if (state == MV_TRUE) /* alarm is ON */
+		{
+			if (onuEponDbP2PForceModeGet())
+			{
+				/* set P2P mode */
+				onuEponDbModeSet(E_EPON_IOCTL_P2P_MODE);
+			}
+			else
+			{
+				/* set EPON mode */
+				onuEponDbModeSet(E_EPON_IOCTL_STD_MODE);
+			}
+            
+>>>>>>> remotes/gfiber-internal/vendor_drops
+#endif
+
 			/* config PCS synchronization configuration  - FEC disabled */
 			mvOnuEponMacPcsDelaySet(0x1C58);
 			/* clear Rx Ctrl message FIFO */
@@ -1202,6 +1250,11 @@
         mvPonPrint(PON_PRINT_DEBUG, PON_ISR_INT_MODULE,
                    "DEBUG: (%s:%d) Notify link is UP\n", __FILE_DESC__, __LINE__);
     }
+    /* TODO(kedong): Enable laser when the RX is ready. Need to be cleaned up
+     * when wavelength selection code is ready.
+     */
+    onuPonTxLaserOn(MV_TRUE);
+
 #endif
 
     return(MV_OK);
diff --git a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/core/epon/eponOnuMngr.c b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/core/epon/eponOnuMngr.c
index e97ff32..9d1ec27 100755
--- a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/core/epon/eponOnuMngr.c
+++ b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/core/epon/eponOnuMngr.c
@@ -633,6 +633,10 @@
       linkStatusCallback(MV_FALSE); 
     } 
   }
+  /* TODO(kedong): Disable laser when the RX is gone. Need to be cleaned up
+   * when wavelength selection code is ready.
+   */
+  onuPonTxLaserOn(MV_FALSE);
 
   if (onuEponDbOnuHoldoverStateGet() != ONU_HOLDOVER_NOT_ACTIVE)
   {
diff --git a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/perf/ponOnuLnxKsMI.c b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/perf/ponOnuLnxKsMI.c
index 34e3840..60a9653 100755
--- a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/perf/ponOnuLnxKsMI.c
+++ b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/perf/ponOnuLnxKsMI.c
@@ -249,13 +249,25 @@
 				goto ioctlErr;
 			}
 			ponDev.drvMode = drvMode;
-
 		} else {
+			ret = get_user(drvMode, (E_PonDriverMode __user *)arg);
+			if (ret != 0) {
+				mvPonPrint(PON_PRINT_ERROR, PON_API_MODULE,
+					"ERROR: (%s:%d) copy from user failed\n", __FILE_DESC__, __LINE__);
+				goto ioctlErr;
+			}
+			if (ponDev.drvMode == drvMode) {
+					mvPonPrint(PON_PRINT_INFO, PON_API_MODULE,
+							"INFO: (%s:%d) Same driver mode, no change\n",
+							__FILE_DESC__, __LINE__);
+					ret = 0;
+			} else {
 			/* Switching between EPON-GPON modes requires reboot initiated by US application */
-			mvPonPrint(PON_PRINT_ERROR, PON_API_MODULE,
-					"ERROR: (%s:%d) command MVPON_IOCTL_INIT is not supported in this mode\n",
-					__FILE_DESC__, __LINE__);
-			goto ioctlErr;
+					mvPonPrint(PON_PRINT_ERROR, PON_API_MODULE,
+							"ERROR: (%s:%d) command MVPON_IOCTL_INIT is not supported in this mode\n",
+							__FILE_DESC__, __LINE__);
+					goto ioctlErr;
+			}
 		}
 		break;
 
diff --git a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/plat/ponOnuBoard.c b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/plat/ponOnuBoard.c
index 0a3d36e..378edbf 100755
--- a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/plat/ponOnuBoard.c
+++ b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/plat/ponOnuBoard.c
@@ -838,13 +838,15 @@
 *******************************************************************************/
 MV_STATUS onuPonTxPowerOn(MV_BOOL txOn)
 {
+	MV_U8		gpioPolarity;
 	MV_U32		gpioGroup, gpioMask;
 	MV_U32		devId = mvCtrlModelGet();
 	MV_STATUS	status = MV_OK;
 
 	PON_GPIO_GET(BOARD_GPP_PON_XVR_TX_POWER, gpioGroup, gpioMask);
 	if (gpioMask != PON_GPIO_NOT_USED) {
-		if (txOn == MV_TRUE)
+		gpioPolarity = mvBoardGpioPolarityGet(BOARD_GPP_PON_XVR_TX_POWER);
+		if ((txOn && gpioPolarity) || (!txOn && !gpioPolarity))
 			status = mvGppValueSet(gpioGroup, gpioMask, gpioMask);
 		else
 			status = mvGppValueSet(gpioGroup, gpioMask, 0);
@@ -901,6 +903,43 @@
 }
 
 /*******************************************************************************
+**  **  906
+**  onuPonTxLaserOn
+**  ____________________________________________________________________________
+**
+**  DESCRIPTION: The function turns ON/OFF TX laser using MPP
+**
+**  PARAMETERS:  MV_BOOL on - MV_TRUE - turn TX laser ON, othervise OFF
+**
+**  OUTPUTS:     None
+**
+**  RETURNS:     MV_OK or error
+**
+*******************************************************************************/
+MV_STATUS onuPonTxLaserOn(MV_BOOL on)
+{
+	MV_STATUS status;
+	MV_U32    gpioGroup, gpioMask;
+	MV_U8     gpioPolarity;
+	MV_U32    trans_value = 0;
+	MV_U32    board_id = mvBoardIdGet();
+
+	if (GFLT200_ID == board_id) {
+		PON_GPIO_GET(BOARD_GPP_PON_XVR_TX, gpioGroup, gpioMask);
+		if (gpioMask == PON_GPIO_NOT_USED)
+			return(MV_ERROR);
+		gpioPolarity = mvBoardGpioPolarityGet(BOARD_GPP_PON_XVR_TX);
+		if ((on && gpioPolarity) || (!on && !gpioPolarity))
+			status = mvGppValueSet(gpioGroup, gpioMask, gpioMask);
+		else
+			status = mvGppValueSet(gpioGroup, gpioMask, 0);
+		transmit_up = on;
+	}
+
+	return(MV_OK);
+}
+
+/*******************************************************************************
 **
 **  onuP2PDbXvrBurstEnablePolaritySet
 **  ____________________________________________________________________________
diff --git a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/plat/ponOnuBoard.h b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/plat/ponOnuBoard.h
index 1077443..6efe4e5 100755
--- a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/plat/ponOnuBoard.h
+++ b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_pon/plat/ponOnuBoard.h
@@ -162,6 +162,7 @@
 void      onuPonPatternBurstTimerHndl(void);
 MV_STATUS onuPonTxPowerOn(MV_BOOL txOn);
 MV_STATUS onuPonTxPowerControlInit(void);
+MV_STATUS onuPonTxLaserOn(MV_BOOL txOn);
 MV_STATUS onuPonTxPowerTimerStateSet(MV_BOOL mode);
 
 MV_STATUS EponXvrSDPolarityHighStatus(MV_U32 interruptStatus, MV_U32 statusMask);
@@ -180,6 +181,3 @@
 ------------------------------------------------------------------------------*/
 
 #endif /* _ONU_PON_BOARD_H */
-
-
-
diff --git a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/core/tpm_init.c b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/core/tpm_init.c
old mode 100755
new mode 100644
index 4cf3632..006dd73
--- a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/core/tpm_init.c
+++ b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/core/tpm_init.c
@@ -686,7 +686,8 @@
 			profile[0] = ESC_OPT_RGMIIA_MAC0 | ESC_OPT_GEPHY_MAC1;
 		if (DB_88F6601_BP_ID == mvBoardIdGet())
 			profile[0] = ESC_OPT_SGMII | ESC_OPT_GEPHY_MAC0 | ESC_OPT_LP_SERDES_FE_GE_PHY;
-		if (RD_88F6601_MC_ID == mvBoardIdGet())
+		if ((RD_88F6601_MC_ID == mvBoardIdGet())
+			|| (GFLT200_ID == mvBoardIdGet()) || (GFLT110_ID == mvBoardIdGet()))
 			profile[0] = ESC_OPT_GEPHY_MAC0;
 		break;
 	case TPM_PON_WAN_G0_G1_DUAL_LAN:
diff --git a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_help.c b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_help.c
index 6771c68..59cf9fd 100755
--- a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_help.c
+++ b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_help.c
@@ -868,7 +868,7 @@
 {
     int off = 0;
 
-    off += sprintf(buf+off, "echo [owner_id] [rule_idx]            > no_rule_add_l2                - delete L2 rule from hardware\n");
+    off += sprintf(buf+off, "echo [owner_id] [rule_num]            > no_rule_add_l2                - delete L2 rule from hardware\n");
     off += sprintf(buf+off, "echo [owner_id] [rule_idx]            > no_rule_add_l3                - delete L3 rule from hardware\n");
     off += sprintf(buf+off, "echo [owner_id] [rule_idx]            > no_rule_add_ipv4              - delete IPv4 rule from hardware\n");
     off += sprintf(buf+off, "echo [owner_id] [rule_idx]            > no_rule_add_ipv6_dip_acl      - delete a IPv6 DIP ACL\n");
diff --git a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_hwcall.c b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_hwcall.c
index 0fa55b6..9764ca8 100755
--- a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_hwcall.c
+++ b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_hwcall.c
@@ -236,6 +236,7 @@
         }
         else
         {
+            tpmcfg_l2_prim_key_entry_t *pentry;
             rule_action.next_phase = nextphase;
             rule_action.pkt_act    = action;
 
@@ -259,7 +260,33 @@
                                        &pkt_mod,
                                        pkt_mod_bm,
                                        &rule_action)) == TPM_RC_OK)
+            {
+                if ((pentry = find_tpm_l2_prim_key_entry_by_owner_id_and_rule_num(ownerid, rulenum)) == 0)
+                    pentry = find_free_tpm_l2_prim_key_entry();
+
+                if (pentry == 0)
+                {
+                    printk(KERN_INFO "L2 rule DB full\n");
+                }
+                else
+                {
+                    pentry->action = action;
+                    strcpy(pentry->frwd_name, frwdname);
+                    strcpy(pentry->key_name, l2keyname);
+                    strcpy(pentry->mod_name, modname);
+                    strcpy(pentry->next_phase, nextphase_str);
+                    pentry->owner_id = ownerid;
+                    pentry->parse_rule_bm = parserulebm;
+                    pentry->parse_flags_bm = parseflagbm;
+                    pentry->pkt_mod_bm = pkt_mod_bm;
+                    pentry->rule_num = rulenum;
+                    pentry->rule_idx = rule_idx;
+                    strcpy(pentry->src_port, srcport_str);
+                    pentry->used = 1;
+                }
+
                 PR_RULE_IDX(rule_idx)
+            }
             else
             {
                 printk(KERN_INFO "%s: tpm_add_l2_rule failed, rc[%d] - %s\n", __FUNCTION__, rc, get_tpm_err_str(rc));
@@ -1416,7 +1443,7 @@
     } noruleaddl2_parm_indx_t;
     // shell line parsing
     uint32_t                 ownerid;
-    uint32_t                 rule_idx;
+    uint32_t                 rule_num;
     int                      parsedargs;
     int                      numparms;
     //Used in API call
@@ -1430,7 +1457,7 @@
     else
     {
         // Get parameters
-        parsedargs = sscanf(buf, "%d %d", &ownerid, &rule_idx);
+        parsedargs = sscanf(buf, "%d %d", &ownerid, &rule_num);
         //printk(KERN_INFO "len=%d, parsedargs=%d. ownerid[%d], rule_idx[%d]\n",
         //       len, parsedargs, ownerid, rule_idx);
 
@@ -1441,14 +1468,24 @@
         }
         else
         {
-            if ((rc = _tpm_del_l2_rule(ownerid,
-                                       rule_idx)) == TPM_RC_OK)
-            {
-                printk(KERN_INFO "OK\n");
+            tpmcfg_l2_prim_key_entry_t *pentry;
+            pentry = find_tpm_l2_prim_key_entry_by_owner_id_and_rule_num(ownerid, rule_num);
+            if (pentry != 0) {
+                if ((rc = _tpm_del_l2_rule(ownerid, pentry->rule_idx)) == TPM_RC_OK)
+                {
+                    printk(KERN_INFO "OK\n");
+                }
+                else
+                {
+                    printk(KERN_INFO "%s: tpm_del_l2_prim_rule failed, rc[%d] - %s\n",
+                           __FUNCTION__, rc, get_tpm_err_str(rc));
+                }
+                pentry->used = 0;
             }
             else
             {
-                printk(KERN_INFO "%s: tpm_del_l2_prim_rule failed, rc[%d] - %s\n", __FUNCTION__, rc, get_tpm_err_str(rc));
+                printk("%s: Table l2_rule does not have entry owner_id[%d], rule_num[%d]\n",
+                       __FUNCTION__, ownerid, rule_num);
             }
         }
     }
diff --git a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_rule_db.c b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_rule_db.c
index 459cfc0..d96c532 100755
--- a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_rule_db.c
+++ b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_rule_db.c
@@ -1541,6 +1541,7 @@
             else
             {
                 strcpy(pentry->name, name);
+                pentry->l2_key_type = l2_key_type_ethertype;
                 pentry->l2_acl.ether_type  = (uint16_t)temp_ety;
             }
         }
@@ -1600,6 +1601,7 @@
             else
             {
                 strcpy(pentry->name, name);
+                pentry->l2_key_type = l2_key_type_gemport;
                 pentry->l2_acl.gem_port  = (uint16_t)temp_gemport;
             }
         }
@@ -1678,6 +1680,7 @@
             else
             {
                 strcpy(pentry->name, name);
+                pentry->l2_key_type = l2_key_type_macaddr;
                 pentry->l2_acl.mac.mac_sa[0] = (uint8_t)sa[0]; pentry->l2_acl.mac.mac_sa[1] = (uint8_t)sa[1]; pentry->l2_acl.mac.mac_sa[2] = (uint8_t)sa[2];
                 pentry->l2_acl.mac.mac_sa[3] = (uint8_t)sa[3]; pentry->l2_acl.mac.mac_sa[4] = (uint8_t)sa[4]; pentry->l2_acl.mac.mac_sa[5] = (uint8_t)sa[5];
 
@@ -1752,6 +1755,7 @@
             else
             {
                 strcpy(pentry->name, name);
+                pentry->l2_key_type = l2_key_type_pppoe;
                 pentry->l2_acl.pppoe_hdr.ppp_session = (uint16_t)temp_session;
                 pentry->l2_acl.pppoe_hdr.ppp_proto   = (uint16_t)temp_prototype;
             }
@@ -1819,6 +1823,9 @@
             else
             {
                 strcpy(pentry->name, name);
+                strcpy(pentry->vlan_rule1, vlan1_name);
+                strcpy(pentry->vlan_rule2, vlan2_name);
+                pentry->l2_key_type = l2_key_type_vlan;
 
                 if (pvlan1entry != 0)
                 {
diff --git a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_setup.c b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_setup.c
index f466545..32c3056 100755
--- a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_setup.c
+++ b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_setup.c
@@ -261,7 +261,7 @@
 {
     char *sysfs_name;
     int (*sysfs_func)( char *buf);
-    } show_sysfs_name_func_t;
+} show_sysfs_name_func_t;
 
 static show_sysfs_name_func_t show_sysfs_name_func_ara[] =
 {
@@ -319,6 +319,12 @@
     {"help_mac_learn_rule_add",      sfs_help_mac_learn_rule_add},
     {"help_mac_learn_def_act_set",   sfs_help_mac_learn_def_act_set},
 
+    {"show_frwd_rule",               sfs_show_frwd_rule},
+    {"show_l2_key_ethertype",        sfs_show_l2_key_ethertype},
+    {"show_l2_key_mac_addr",         sfs_show_l2_key_mac_addr},
+    {"show_l2_key_vlan",             sfs_show_l2_key_vlan},
+    {"show_l2_rule",                 sfs_show_l2_rule},
+    {"show_vlan_rule",               sfs_show_vlan_rule},
 };
 static int num_show_name_funcs = sizeof(show_sysfs_name_func_ara)/sizeof(show_sysfs_name_func_ara[0]);
 
@@ -420,9 +426,16 @@
 static DEVICE_ATTR(help_flush_vtu,                                  S_IRUSR, tpm_cfg_show, tpm_cfg_store);
 #endif /* CONFIG_MV_TPM_SYSFS_HELP */
 
+/* sysfs for dumping forwarding table in yaml. */
+static DEVICE_ATTR(show_frwd_rule,                                  S_IRUSR, tpm_cfg_show, NULL);
+static DEVICE_ATTR(show_l2_key_ethertype,                           S_IRUSR, tpm_cfg_show, NULL);
+static DEVICE_ATTR(show_l2_key_mac_addr,                            S_IRUSR, tpm_cfg_show, NULL);
+static DEVICE_ATTR(show_l2_key_vlan,                                S_IRUSR, tpm_cfg_show, NULL);
+static DEVICE_ATTR(show_l2_rule,                                    S_IRUSR, tpm_cfg_show, NULL);
+static DEVICE_ATTR(show_vlan_rule,                                  S_IRUSR, tpm_cfg_show, NULL);
+
 // rule set
 static DEVICE_ATTR(frwd_rule_set,                                   S_IWUSR, tpm_cfg_show, tpm_cfg_store);
-
 static DEVICE_ATTR(vlan_rule_set,                                   S_IWUSR, tpm_cfg_show, tpm_cfg_store);
 static DEVICE_ATTR(mod_mh_rule_set,                                 S_IWUSR, tpm_cfg_show, tpm_cfg_store);
 static DEVICE_ATTR(mod_vlan_rule_set,                               S_IWUSR, tpm_cfg_show, tpm_cfg_store);
@@ -644,6 +657,10 @@
     &dev_attr_help_mac_learn_rule_add.attr,
     &dev_attr_help_mac_learn_def_act_set.attr,
 #endif /* CONFIG_MV_TPM_SYSFS_HELP */
+    &dev_attr_show_l2_key_ethertype.attr,
+    &dev_attr_show_l2_key_mac_addr.attr,
+    &dev_attr_show_l2_key_vlan.attr,
+    &dev_attr_show_l2_rule.attr,
 
     &dev_attr_l2_key_ethertype_rule_set.attr,
     &dev_attr_l2_key_gemport_rule_set.attr,
@@ -831,6 +848,7 @@
     &dev_attr_help_rule_table_display.attr,
     &dev_attr_help_delete_entry_rule_table.attr,
 #endif /* CONFIG_MV_TPM_SYSFS_HELP */
+    &dev_attr_show_frwd_rule.attr,
 
     &dev_attr_frwd_rule_set.attr,
 
@@ -859,6 +877,7 @@
     &dev_attr_help_rule_table_display.attr,
     &dev_attr_help_delete_entry_rule_table.attr,
 #endif /* CONFIG_MV_TPM_SYSFS_HELP */
+    &dev_attr_show_vlan_rule.attr,
 
     &dev_attr_vlan_rule_set.attr,
 
@@ -1143,7 +1162,6 @@
 #endif /* CONFIG_MV_TPM_SYSFS_HELP */
 
     &dev_attr_frwd_rule_set.attr,
-
     &dev_attr_vlan_rule_set.attr,
     &dev_attr_mod_vlan_rule_set.attr,
     &dev_attr_mod_ipv4_addr_rule_set.attr,
diff --git a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_utils.c b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_utils.c
index 00099a5..1778205 100755
--- a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_utils.c
+++ b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_utils.c
@@ -1210,6 +1210,68 @@
     }
 }
 
+static tpmcfg_l2_prim_key_entry_t tpm_sysfs_l2_rule_table[DB_TPMCFG_MAX_ENTRIES];
+
+static tpm_generic_rule_db_t tpm_l2_rule_db =
+{
+    .max_num_entries    = DB_TPMCFG_MAX_ENTRIES,
+    .num_entries        = 0,
+    .size_entry         = sizeof(tpmcfg_l2_prim_key_entry_t),
+    .entryAra           = tpm_sysfs_l2_rule_table
+};
+
+
+static void init_tpm_l2_rule_db(void)
+{
+    tpmcfg_l2_prim_key_entry_t *pentry = (tpmcfg_l2_prim_key_entry_t *)tpm_l2_rule_db.entryAra;
+    int                   indx;
+
+    printk(KERN_INFO "%s: Clearing DB\n", __FUNCTION__);
+    for (indx = 0; indx < tpm_l2_rule_db.max_num_entries; indx++, pentry++)
+    {
+        pentry->used = 0;
+    }
+}
+
+tpmcfg_l2_prim_key_entry_t *find_tpm_l2_prim_key_entry_by_owner_id_and_rule_num(uint32_t owner_id, uint32_t rule_num) {
+    tpmcfg_l2_prim_key_entry_t *pentry = (tpmcfg_l2_prim_key_entry_t *)tpm_l2_rule_db.entryAra;
+    int                   indx;
+
+    for (indx = 0; indx < tpm_l2_rule_db.max_num_entries; indx++, pentry++)
+    {
+        if (pentry->owner_id == owner_id && pentry->rule_num == rule_num && pentry->used)
+            return pentry;
+    }
+    return 0;
+}
+
+tpmcfg_l2_prim_key_entry_t *find_free_tpm_l2_prim_key_entry(void) {
+    tpmcfg_l2_prim_key_entry_t *pentry = (tpmcfg_l2_prim_key_entry_t *)tpm_l2_rule_db.entryAra;
+    int                   indx;
+
+    for (indx = 0; indx < tpm_l2_rule_db.max_num_entries; indx++, pentry++)
+    {
+        if (!pentry->used) return pentry;
+    }
+    return 0;
+}
+
+GT_BOOL del_tpm_l2_prim_key_entry(uint32_t owner_id, uint32_t rule_num) {
+    tpmcfg_l2_prim_key_entry_t *pentry = (tpmcfg_l2_prim_key_entry_t *)tpm_l2_key_db.entryAra;
+    int                   indx;
+
+    for (indx = 0; indx < tpm_l2_key_db.max_num_entries; indx++, pentry++)
+    {
+        if (pentry->owner_id == owner_id && pentry->rule_num == rule_num && pentry->used)
+        {
+            pentry->used = 0;
+            return GT_TRUE;
+        };
+    }
+    return GT_FALSE;
+}
+
+
 /********************************************************************************/
 /*                          L3 ACL table and API                                */
 /********************************************************************************/
@@ -1825,6 +1887,7 @@
     init_tpm_vlan_db();
     init_tpm_mod_db();
     init_tpm_l2_key_db();
+    init_tpm_l2_rule_db();
     init_tpm_l3_key_db();
     init_tpm_ipv4_key_db();
     init_tpm_ipv6_key_db();
@@ -1873,3 +1936,146 @@
 	return(TPM_RC_OK);
 }
 
+int sfs_show_frwd_rule (char *buf)
+{
+    tpmcfg_frwd_entry_t *pentry =
+        (tpmcfg_frwd_entry_t *)tpm_frwd_rule_db.entryAra;
+    int                 indx;
+    int                 off = 0;
+
+    for (indx = 0; indx < tpm_frwd_rule_db.max_num_entries; indx++, pentry++)
+    {
+        if (pentry->name[0] != 0)
+        {
+            off += sprintf(buf+off, "--- !FrwdRule\n");
+            off += sprintf(buf+off, "gem_port: %d\n", pentry->frwd.gem_port);
+            off += sprintf(buf+off, "port_bitmap: %-3d\n", pentry->frwd.trg_port);
+            off += sprintf(buf+off, "queue: %d\n", pentry->frwd.trg_queue);
+            off += sprintf(buf+off, "rule_name: %s\n", pentry->name);
+        }
+    }
+    return off;
+}
+
+int sfs_show_l2_key_ethertype (char *buf)
+{
+    tpmcfg_l2_key_entry_t *pentry = (tpmcfg_l2_key_entry_t *)tpm_l2_key_db.entryAra;
+    int                   indx;
+    int                   off = 0;
+
+    for (indx = 0; indx < tpm_l2_key_db.max_num_entries; indx++, pentry++)
+    {
+        if (pentry->name[0] != 0 && l2_key_type_ethertype == pentry->l2_key_type)
+        {
+            off += sprintf(buf+off, "--- !L2KeyEtherType\n");
+            off += sprintf(buf+off, "rule_name: %s\n", pentry->name);
+            off += sprintf(buf+off, "ethertype: 0x%x\n", pentry->l2_acl.ether_type);
+        }
+    }
+    return off;
+}
+
+int sfs_show_l2_key_mac_addr (char *buf)
+{
+    tpmcfg_l2_key_entry_t *pentry = (tpmcfg_l2_key_entry_t *)tpm_l2_key_db.entryAra;
+    int                   indx;
+    int                   off = 0;
+    char                  d1[60];
+    char                  d2[60];
+    char                  d1_mask[60];
+    char                  d2_mask[60];
+
+    for (indx = 0; indx < tpm_l2_key_db.max_num_entries; indx++, pentry++)
+    {
+        if (pentry->name[0] != 0 && l2_key_type_macaddr == pentry->l2_key_type)
+        {
+            off += sprintf(buf+off, "--- !L2KeyMacAddr\n");
+            format_mac_addr(pentry->l2_acl.mac.mac_da, d1);
+            format_mac_addr(pentry->l2_acl.mac.mac_da_mask, d1_mask);
+            format_mac_addr(pentry->l2_acl.mac.mac_sa, d2);
+            format_mac_addr(pentry->l2_acl.mac.mac_sa_mask, d2_mask);
+            off += sprintf(buf+off, "da: %s\n", d1);
+            off += sprintf(buf+off, "da_mask: %s\n", d1_mask);
+            off += sprintf(buf+off, "rule_name: %s\n", pentry->name);
+            off += sprintf(buf+off, "sa: %s\n", d2);
+            off += sprintf(buf+off, "sa_mask: %s\n", d2_mask);
+        }
+    }
+    return off;
+}
+
+int sfs_show_l2_key_vlan (char *buf)
+{
+    tpmcfg_l2_key_entry_t *pentry = (tpmcfg_l2_key_entry_t *)tpm_l2_key_db.entryAra;
+    int                   indx;
+    int                   off = 0;
+
+    for (indx = 0; indx < tpm_l2_key_db.max_num_entries; indx++, pentry++)
+    {
+        if (pentry->name[0] != 0 && l2_key_type_vlan == pentry->l2_key_type)
+        {
+            off += sprintf(buf+off, "--- !L2KeyVlan\n");
+            off += sprintf(buf+off, "rule_name: %s\n", pentry->name);
+            off += sprintf(buf+off, "vlan_rule1: %s\n", pentry->vlan_rule1);
+            off += sprintf(buf+off, "vlan_rule2: %s\n", pentry->vlan_rule2);
+        }
+    }
+    return off;
+}
+
+int sfs_show_vlan_rule (char *buf)
+{
+    tpmcfg_vlan_entry_t *pentry =
+        (tpmcfg_vlan_entry_t *)tpm_vlan_rule_db.entryAra;
+    int                 indx;
+    int                 off = 0;
+
+    for (indx = 0; indx < tpm_vlan_rule_db.max_num_entries; indx++, pentry++)
+    {
+        if (pentry->name[0] != 0)
+        {
+            off += sprintf(buf+off, "--- !VlanRule\n");
+            off += sprintf(buf+off, "rule_name: %s\n", pentry->name);
+            off += sprintf(buf+off, "tpid: 0x%x\n", pentry->vlan.tpid);
+            off += sprintf(buf+off, "tpid_mask: 0x%x\n",
+                           pentry->vlan.tpid_mask);
+            off += sprintf(buf+off, "vid: %d\n", pentry->vlan.vid);
+            off += sprintf(buf+off, "vid_mask: 0x%x\n", pentry->vlan.vid_mask);
+            off += sprintf(buf+off, "cfi: %d\n", pentry->vlan.cfi);
+            off += sprintf(buf+off, "cfi_mask: 0x%x\n", pentry->vlan.cfi_mask);
+            off += sprintf(buf+off, "pbit: %d\n", pentry->vlan.pbit);
+            off += sprintf(buf+off, "pbit_mask: 0x%x\n",
+                           pentry->vlan.pbit_mask);
+        }
+    }
+    return off;
+}
+
+int sfs_show_l2_rule (char *buf)
+{
+    tpmcfg_l2_prim_key_entry_t *pentry = (tpmcfg_l2_prim_key_entry_t *)tpm_l2_rule_db.entryAra;
+    int                   indx;
+    int                   off = 0;
+
+    for (indx = 0; indx < tpm_l2_rule_db.max_num_entries; indx++, pentry++)
+    {
+        if (pentry->used)
+        {
+            off += sprintf(buf+off, "--- !L2Rule\n");
+            off += sprintf(buf+off, "action: %d\n", pentry->action);
+            off += sprintf(buf+off, "frwd_name: %s\n", pentry->frwd_name);
+            off += sprintf(buf+off, "key_name: %s\n", pentry->key_name);
+            off += sprintf(buf+off, "mod_name: %s\n", pentry->mod_name);
+            off += sprintf(buf+off, "next_phase: %s\n", pentry->next_phase);
+            off += sprintf(buf+off, "owner_id: %d\n", pentry->owner_id);
+            off += sprintf(buf+off, "parse_flags_bm: 0x%x\n", pentry->parse_flags_bm);
+            off += sprintf(buf+off, "parse_rule_bm: 0x%x\n", pentry->parse_rule_bm);
+            off += sprintf(buf+off, "pkt_mod_bm: 0x%x\n", pentry->pkt_mod_bm);
+            off += sprintf(buf+off, "rule_idx: %d\n", pentry->rule_idx);
+            off += sprintf(buf+off, "rule_num: %d\n", pentry->rule_num);
+            off += sprintf(buf+off, "src_port: %s\n", pentry->src_port);
+        }
+    }
+    return off;
+}
+
diff --git a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_utils.h b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_utils.h
index ddf2bcf..ef23a68 100755
--- a/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_utils.h
+++ b/arch/arm/plat-feroceon/mv_drivers_lsp/mv_tpm/perf/tpm_sysfs_utils.h
@@ -198,10 +198,28 @@
 extern GT_BOOL             del_tpm_mod_entry_by_name  (char *name);
 extern void                show_tpm_mod_db(void);
 
+typedef enum
+{
+    l2_key_type_macaddr,
+    l2_key_type_vlan,
+    l2_key_type_ethertype,
+    l2_key_type_gemport,
+    l2_key_type_pppoe
+} tpmcfg_l2_key_type_t;
+
 // L2 ACL entry and DB API
 typedef struct
 {
     char                   name[DB_TPMCFG_MAX_NAME+1];
+    tpmcfg_l2_key_type_t   l2_key_type;
+    /* This is a hack. Vlan name is not saved as part of l2_key. Therefore it is
+     * kind of hard to track which vlan rule l2_key_vlan is using. But
+     * tpm_l2_acl_key_t is actually used by tcam. The size should not be
+     * altered. We have to put aside some space just for VLAN name in case the
+     * l2_key_type is l2_key_vlan.
+     */
+    char                   vlan_rule1[DB_TPMCFG_MAX_NAME+1];
+    char                   vlan_rule2[DB_TPMCFG_MAX_NAME+1];
     tpm_l2_acl_key_t       l2_acl;
 } tpmcfg_l2_key_entry_t;
 
@@ -210,6 +228,30 @@
 extern GT_BOOL                del_tpm_l2_key_entry_by_name  (char *name);
 extern void                   show_tpm_l2_key_db(void);
 
+typedef struct
+{
+    /* owner_id is not used at all... Only for logging. We cannot get it from
+     * tpm_rule_l2_prim_key_t. rule_num is the real track number for app. */
+
+    uint32_t               action;
+    char                   frwd_name[DB_TPMCFG_MAX_NAME+1];
+    char                   key_name[DB_TPMCFG_MAX_NAME+1];
+    char                   mod_name[DB_TPMCFG_MAX_NAME+1];
+    char                   next_phase[DB_TPMCFG_MAX_NAME+1];
+    uint32_t               owner_id;
+    uint32_t               parse_rule_bm;
+    uint32_t               parse_flags_bm;
+    uint32_t               pkt_mod_bm;
+    uint32_t               rule_num;
+    uint32_t               rule_idx;
+    char                   src_port[DB_TPMCFG_MAX_NAME+1];
+    int                    used;
+} tpmcfg_l2_prim_key_entry_t;
+
+extern tpmcfg_l2_prim_key_entry_t *find_tpm_l2_prim_key_entry_by_owner_id_and_rule_num(uint32_t owner_id, uint32_t rule_num);
+extern tpmcfg_l2_prim_key_entry_t *find_free_tpm_l2_prim_key_entry(void);
+extern GT_BOOL                del_tpm_l2_prim_key_entry(uint32_t owner_id, uint32_t rule_num);
+
 // L3 ACL entry and DB API
 typedef struct
 {
@@ -291,5 +333,11 @@
 );
 tpm_error_code_t tpm_proc_send_genquery_to_uni(tpm_trg_port_type_t dest_port_bm, uint32_t packet_num);
 
+extern int sfs_show_frwd_rule(char *buf);
+extern int sfs_show_l2_key_ethertype(char *buf);
+extern int sfs_show_l2_key_mac_addr(char *buf);
+extern int sfs_show_l2_key_vlan(char *buf);
+extern int sfs_show_l2_rule(char *buf);
+extern int sfs_show_vlan_rule(char *buf);
 
 #endif  /* _TPM_USR_TPM_SYSFS_DB_H_*/
diff --git a/arch/arm/plat-feroceon/mv_hal/sflash/mvSFlash.c b/arch/arm/plat-feroceon/mv_hal/sflash/mvSFlash.c
index 07fbd60..bd1dc5f 100755
--- a/arch/arm/plat-feroceon/mv_hal/sflash/mvSFlash.c
+++ b/arch/arm/plat-feroceon/mv_hal/sflash/mvSFlash.c
@@ -178,6 +178,31 @@
      MV_M25Q128_MAX_FAST_SPI_FREQ,
      MV_M25Q128_FAST_READ_DUMMY_BYTES
     },
+    /* Micron N25Q256 SPI flash, 32MB, 256 sectors of 64K each */
+    {
+     MV_M25P_WREN_CMND_OPCD,
+     MV_M25P_WRDI_CMND_OPCD,
+     MV_M25P_RDID_CMND_OPCD,
+     MV_M25P_RDSR_CMND_OPCD,
+     MV_M25P_WRSR_CMND_OPCD,
+     MV_M25P_READ_CMND_OPCD,
+     MV_M25P_FAST_RD_CMND_OPCD,
+     MV_M25P_PP_CMND_OPCD,
+     MV_M25P_SE_CMND_OPCD,
+     MV_M25P_BE_CMND_OPCD,
+     MV_M25P_RES_CMND_OPCD,
+     MV_SFLASH_NO_SPECIFIC_OPCD,    /* power save not supported */
+     MV_N25Q_EN4B_CMND_OPCD,
+     MV_N25Q256_SECTOR_SIZE,
+     MV_N25Q256_SECTOR_NUMBER,
+     MV_M25Q_PAGE_SIZE,
+     "Micron N25Q256",
+     MV_M25PXXX_ST_MANF_ID,
+     MV_N25Q256_DEVICE_ID,
+     MV_N25Q256_MAX_SPI_FREQ,
+     MV_N25Q256_MAX_FAST_SPI_FREQ,
+     MV_N25Q256_FAST_READ_DUMMY_BYTES
+    },
     /* Macronix MXIC MX25L6405 SPI flash, 8MB, 128 sectors of 64K each */
     {
      MV_MX25L_WREN_CMND_OPCD,
diff --git a/arch/arm/plat-feroceon/mv_hal/sflash/mvSFlashSpec.h b/arch/arm/plat-feroceon/mv_hal/sflash/mvSFlashSpec.h
index 6fb2428..b999e5b 100755
--- a/arch/arm/plat-feroceon/mv_hal/sflash/mvSFlashSpec.h
+++ b/arch/arm/plat-feroceon/mv_hal/sflash/mvSFlashSpec.h
@@ -127,6 +127,10 @@
 #define     MV_M25Q128_MAX_SPI_FREQ             20000000    /* 20MHz */
 #define     MV_M25Q128_MAX_FAST_SPI_FREQ        50000000    /* 50MHz */
 #define     MV_M25Q128_FAST_READ_DUMMY_BYTES    1
+#define     MV_N25Q256_DEVICE_ID                0xBA19
+#define     MV_N25Q256_MAX_SPI_FREQ             20000000    /* 20MHz */
+#define     MV_N25Q256_MAX_FAST_SPI_FREQ        50000000    /* 50MHz */
+#define     MV_N25Q256_FAST_READ_DUMMY_BYTES    1
 
 
 /* Sector Sizes and population per device model*/
@@ -134,10 +138,12 @@
 #define     MV_M25P64_SECTOR_SIZE               0x10000 /* 64K */
 #define     MV_M25P128_SECTOR_SIZE              0x40000 /* 256K */
 #define     MV_M25Q128_SECTOR_SIZE              0x10000 /* 64K */
+#define     MV_N25Q256_SECTOR_SIZE              0x10000 /* 64K */
 #define     MV_M25P32_SECTOR_NUMBER             64
 #define     MV_M25P64_SECTOR_NUMBER             128
 #define     MV_M25P128_SECTOR_NUMBER            64
 #define     MV_M25Q128_SECTOR_NUMBER            256
+#define     MV_N25Q256_SECTOR_NUMBER            512
 #define	    MV_M25P_PAGE_SIZE			0x100   /* 256 byte */
 #define	    MV_M25Q_PAGE_SIZE			0x100   /* 256 byte */
 
@@ -152,6 +158,7 @@
 #define		MV_M25P_SE_CMND_OPCD			    0xD8	/* Sector Erase */
 #define		MV_M25P_BE_CMND_OPCD			    0xC7	/* Bulk Erase */
 #define		MV_M25P_RES_CMND_OPCD			    0xAB	/* Read Electronic Signature */
+#define		MV_N25Q_EN4B_CMND_OPCD			    0xB7	/* Enable 4-byte mode */
 
 /* Status Register Write Protect Bit Masks - 3bits */
 #define		MV_M25P_STATUS_REG_WP_MASK	        (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET)
diff --git a/init/Kconfig b/init/Kconfig
index eb4b337..072d249 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -818,6 +818,18 @@
 	  very difficult to diagnose system problems, saying N here is
 	  strongly discouraged.
 
+config PRINTK_PERSIST
+	default n
+	bool "printk log persists across reboots" if PRINTK
+	help
+	  This option tries to keep the printk memory buffer in a well-known
+	  location in physical memory. It isn't cleared on reboot (unless RAM
+	  is wiped by your boot loader or BIOS) so if your system crashes
+	  or panics, you might get to examine all the log messages next time you
+	  boot. The persisted log messages show up in your 'dmesg' output.
+	  Note: you must supply the log_buf_len= kernel parameter to
+	  activate this feature.
+
 config BUG
 	bool "BUG() support" if EMBEDDED
 	default y
diff --git a/kernel/printk.c b/kernel/printk.c
index d2cde12..ad1a79b 100755
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -71,8 +71,6 @@
 	DEFAULT_CONSOLE_LOGLEVEL,	/* default_console_loglevel */
 };
 
-static int saved_console_loglevel = -1;
-
 /*
  * Low level drivers may need that to know if they can schedule in
  * their unblank() callback or not. So let's export it.
@@ -115,7 +113,12 @@
  */
 static unsigned log_start;	/* Index into log_buf: next char to be read by syslog() */
 static unsigned con_start;	/* Index into log_buf: next char to be sent to consoles */
+
+#ifdef CONFIG_PRINTK_PERSIST
+#define log_end logbits->_log_end
+#else
 static unsigned log_end;	/* Index into log_buf: most-recently-written-char + 1 */
+#endif
 
 /*
  *	Array of consoles built from command line options (console=)
@@ -143,11 +146,6 @@
 
 #ifdef CONFIG_PRINTK
 
-static char __log_buf[__LOG_BUF_LEN];
-static char *log_buf = __log_buf;
-static int log_buf_len = __LOG_BUF_LEN;
-static unsigned logged_chars; /* Number of chars produced since last read+clear operation */
-
 #ifdef CONFIG_KEXEC
 /*
  * This appends the listed symbols to /proc/vmcoreinfo
@@ -166,6 +164,97 @@
 }
 #endif
 
+static int saved_console_loglevel = -1;
+static char __log_buf[__LOG_BUF_LEN];
+static char *log_buf = __log_buf;
+
+#ifndef CONFIG_PRINTK_PERSIST
+
+static int log_buf_len = __LOG_BUF_LEN;
+static unsigned logged_chars; /* Number of chars produced since last read+clear operation */
+
+static __init char *log_buf_alloc(unsigned long size, unsigned *dest_offset)
+{
+	return alloc_bootmem(size);
+}
+
+#else  /* CONFIG_PRINTK_PERSIST */
+
+struct logbits {
+	int magic; /* needed to verify the memory across reboots */
+	int _log_buf_len; /* leading _ so they aren't replaced by #define */
+	unsigned _logged_chars;
+	unsigned _log_end;
+};
+static struct logbits __logbits = {
+	._log_buf_len = __LOG_BUF_LEN,
+};
+static struct logbits *logbits = &__logbits;
+#define log_buf_len logbits->_log_buf_len
+#define logged_chars logbits->_logged_chars
+
+#define PERSIST_SEARCH_START 0
+#define PERSIST_SEARCH_END 0xfe000000
+#define PERSIST_SEARCH_JUMP (16*1024*1024)
+#define PERSIST_MAGIC 0xbabb1e
+
+/*
+ * size is a power of 2 so that the printk offset mask will work.  We'll add
+ * a bit more space to the end of the buffer for our extra data, but that
+ * won't change the offset of the buffers.
+ */
+static __init char *log_buf_alloc(unsigned long size, unsigned *dest_offset)
+{
+	unsigned long where;
+	char *buf;
+	unsigned long full_size = size + sizeof(struct logbits);
+	struct logbits *new_logbits;
+
+	for (where = PERSIST_SEARCH_END - size;
+			where >= PERSIST_SEARCH_START;
+			where -= PERSIST_SEARCH_JUMP) {
+		if (reserve_bootmem(where, full_size, BOOTMEM_EXCLUSIVE))
+			continue;
+
+		buf = phys_to_virt(where);
+		new_logbits = phys_to_virt(where + size);
+		printk(KERN_INFO "printk_persist: memory reserved @ 0x%08lx\n",
+			where);
+		if (new_logbits->magic != PERSIST_MAGIC ||
+				new_logbits->_log_buf_len != size ||
+				new_logbits->_logged_chars > size) {
+			printk(KERN_INFO "printk_persist: header invalid, "
+				"cleared.\n");
+			memset(buf, 0, full_size);
+			new_logbits->magic = PERSIST_MAGIC;
+			new_logbits->_log_buf_len = size;
+			new_logbits->_logged_chars = 0;
+			new_logbits->_log_end = 0;
+		} else {
+			printk(KERN_INFO "printk_persist: header valid; "
+				"logged=%d next=%d\n",
+				new_logbits->_logged_chars,
+				new_logbits->_log_end);
+		}
+		*dest_offset = new_logbits->_log_end;
+		new_logbits->_log_end = log_end;
+		if (new_logbits->_logged_chars + logged_chars <= size)
+			new_logbits->_logged_chars += logged_chars;
+		else
+			new_logbits->_logged_chars = size;
+		logbits = new_logbits;
+		return buf;
+	}
+	goto error;
+
+error:
+	/* replace the buffer, but don't bother to swap struct logbits */
+	printk(KERN_ERR "printk_persist: failed to reserve bootmem "
+		"area. disabled.\n");
+	return alloc_bootmem(full_size);
+}
+#endif  /* CONFIG_PRINTK_PERSIST */
+
 static int __init log_buf_len_setup(char *str)
 {
 	unsigned size = memparse(str, &str);
@@ -174,10 +263,10 @@
 	if (size)
 		size = roundup_pow_of_two(size);
 	if (size > log_buf_len) {
-		unsigned start, dest_idx, offset;
+		unsigned start, dest_offset = 0, dest_idx, offset;
 		char *new_log_buf;
 
-		new_log_buf = alloc_bootmem(size);
+		new_log_buf = log_buf_alloc(size, &dest_offset);
 		if (!new_log_buf) {
 			printk(KERN_WARNING "log_buf_len: allocation failed\n");
 			goto out;
@@ -188,15 +277,16 @@
 		log_buf = new_log_buf;
 
 		offset = start = min(con_start, log_start);
-		dest_idx = 0;
+		dest_idx = dest_offset;
 		while (start != log_end) {
-			log_buf[dest_idx] = __log_buf[start & (__LOG_BUF_LEN - 1)];
+			log_buf[dest_idx & (size - 1)] =
+				__log_buf[start & (__LOG_BUF_LEN - 1)];
 			start++;
 			dest_idx++;
 		}
-		log_start -= offset;
-		con_start -= offset;
-		log_end -= offset;
+		log_start += dest_offset - offset;
+		con_start += dest_offset - offset;
+		log_end += dest_offset - offset;
 		spin_unlock_irqrestore(&logbuf_lock, flags);
 
 		printk(KERN_NOTICE "log_buf_len: %d\n", log_buf_len);
@@ -260,6 +350,7 @@
 }
 #endif
 
+#define COPY_SIZE 4096
 /*
  * Commands to do_syslog:
  *
@@ -277,6 +368,7 @@
  */
 int do_syslog(int type, char __user *buf, int len)
 {
+	char *copybuf;
 	unsigned i, j, limit, count;
 	int do_clear = 0;
 	char c;
@@ -336,6 +428,11 @@
 			error = -EFAULT;
 			goto out;
 		}
+		copybuf = kmalloc(COPY_SIZE, GFP_KERNEL);
+		if (!copybuf) {
+			error = -ENOMEM;
+			goto out;
+		}
 		count = len;
 		if (count > log_buf_len)
 			count = log_buf_len;
@@ -346,7 +443,7 @@
 			logged_chars = 0;
 		limit = log_end;
 		/*
-		 * __put_user() could sleep, and while we sleep
+		 * copy_to_user() could sleep, and while we sleep
 		 * printk() could overwrite the messages
 		 * we try to copy to user space. Therefore
 		 * the messages are copied in reverse. <manfreds>
@@ -356,14 +453,26 @@
 			if (j + log_buf_len < log_end)
 				break;
 			c = LOG_BUF(j);
-			spin_unlock_irq(&logbuf_lock);
-			error = __put_user(c,&buf[count-1-i]);
-			cond_resched();
-			spin_lock_irq(&logbuf_lock);
+			copybuf[COPY_SIZE-1-(i % COPY_SIZE)] = c;
+			if ((i+1) % COPY_SIZE == 0) {
+				spin_unlock_irq(&logbuf_lock);
+				error = copy_to_user(&buf[count-1-i],
+						copybuf, COPY_SIZE);
+				cond_resched();
+				spin_lock_irq(&logbuf_lock);
+			}
 		}
 		spin_unlock_irq(&logbuf_lock);
-		if (error)
-			break;
+		if (!error) {
+			/* in case copybuf was only partially filled */
+			error = copy_to_user(&buf[count-i],
+				copybuf + COPY_SIZE - (i % COPY_SIZE),
+				i % COPY_SIZE);
+		}
+		if (error) {
+			error = -EFAULT;
+			goto copy_done;
+		}
 		error = i;
 		if (i != count) {
 			int offset = count-error;
@@ -377,6 +486,8 @@
 				cond_resched();
 			}
 		}
+copy_done:
+		kfree(copybuf);
 		break;
 	case 5:		/* Clear ring buffer */
 		logged_chars = 0;
@@ -757,7 +868,6 @@
 			emit_log_char('<');
 			emit_log_char(current_log_level + '0');
 			emit_log_char('>');
-			printed_len += 3;
 			new_text_line = 0;
 
 			if (printk_time) {
@@ -775,7 +885,6 @@
 
 				for (tp = tbuf; tp < tbuf + tlen; tp++)
 					emit_log_char(*tp);
-				printed_len += tlen;
 			}
 
 			if (!*p)
diff --git a/scripts/mkuboot.sh b/scripts/mkuboot.sh
index 2e3d3cd..d8c0d1a 100755
--- a/scripts/mkuboot.sh
+++ b/scripts/mkuboot.sh
@@ -4,7 +4,7 @@
 # Build U-Boot image when `mkimage' tool is available.
 #
 
-MKIMAGE=$(type -path "${CROSS_COMPILE}mkimage")
+MKIMAGE=$(type -path ${CROSS_COMPILE#*\ }mkimage)
 
 if [ -z "${MKIMAGE}" ]; then
 	MKIMAGE=$(type -path mkimage)