| #ifndef __NET_CFG80211_H |
| #define __NET_CFG80211_H |
| /* |
| * 802.11 device and configuration interface |
| * |
| * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/netdevice.h> |
| #include <linux/debugfs.h> |
| #include <linux/list.h> |
| #include <linux/netlink.h> |
| #include <linux/skbuff.h> |
| #include <linux/nl80211.h> |
| #include <linux/if_ether.h> |
| #include <linux/ieee80211.h> |
| #include <net/regulatory.h> |
| |
| /** |
| * DOC: Introduction |
| * |
| * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges |
| * userspace and drivers, and offers some utility functionality associated |
| * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used |
| * by all modern wireless drivers in Linux, so that they offer a consistent |
| * API through nl80211. For backward compatibility, cfg80211 also offers |
| * wireless extensions to userspace, but hides them from drivers completely. |
| * |
| * Additionally, cfg80211 contains code to help enforce regulatory spectrum |
| * use restrictions. |
| */ |
| |
| |
| /** |
| * DOC: Device registration |
| * |
| * In order for a driver to use cfg80211, it must register the hardware device |
| * with cfg80211. This happens through a number of hardware capability structs |
| * described below. |
| * |
| * The fundamental structure for each device is the 'wiphy', of which each |
| * instance describes a physical wireless device connected to the system. Each |
| * such wiphy can have zero, one, or many virtual interfaces associated with |
| * it, which need to be identified as such by pointing the network interface's |
| * @ieee80211_ptr pointer to a &struct wireless_dev which further describes |
| * the wireless part of the interface, normally this struct is embedded in the |
| * network interface's private data area. Drivers can optionally allow creating |
| * or destroying virtual interfaces on the fly, but without at least one or the |
| * ability to create some the wireless device isn't useful. |
| * |
| * Each wiphy structure contains device capability information, and also has |
| * a pointer to the various operations the driver offers. The definitions and |
| * structures here describe these capabilities in detail. |
| */ |
| |
| /* |
| * wireless hardware capability structures |
| */ |
| |
| /** |
| * enum ieee80211_band - supported frequency bands |
| * |
| * The bands are assigned this way because the supported |
| * bitrates differ in these bands. |
| * |
| * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band |
| * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7) |
| * @IEEE80211_NUM_BANDS: number of defined bands |
| */ |
| enum ieee80211_band { |
| IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ, |
| IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ, |
| |
| /* keep last */ |
| IEEE80211_NUM_BANDS |
| }; |
| |
| /** |
| * enum ieee80211_channel_flags - channel flags |
| * |
| * Channel flags set by the regulatory control code. |
| * |
| * @IEEE80211_CHAN_DISABLED: This channel is disabled. |
| * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted |
| * on this channel. |
| * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel. |
| * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. |
| * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel |
| * is not permitted. |
| * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel |
| * is not permitted. |
| */ |
| enum ieee80211_channel_flags { |
| IEEE80211_CHAN_DISABLED = 1<<0, |
| IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, |
| IEEE80211_CHAN_NO_IBSS = 1<<2, |
| IEEE80211_CHAN_RADAR = 1<<3, |
| IEEE80211_CHAN_NO_HT40PLUS = 1<<4, |
| IEEE80211_CHAN_NO_HT40MINUS = 1<<5, |
| }; |
| |
| #define IEEE80211_CHAN_NO_HT40 \ |
| (IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) |
| |
| /** |
| * struct ieee80211_channel - channel definition |
| * |
| * This structure describes a single channel for use |
| * with cfg80211. |
| * |
| * @center_freq: center frequency in MHz |
| * @hw_value: hardware-specific value for the channel |
| * @flags: channel flags from &enum ieee80211_channel_flags. |
| * @orig_flags: channel flags at registration time, used by regulatory |
| * code to support devices with additional restrictions |
| * @band: band this channel belongs to. |
| * @max_antenna_gain: maximum antenna gain in dBi |
| * @max_power: maximum transmission power (in dBm) |
| * @beacon_found: helper to regulatory code to indicate when a beacon |
| * has been found on this channel. Use regulatory_hint_found_beacon() |
| * to enable this, this is useful only on 5 GHz band. |
| * @orig_mag: internal use |
| * @orig_mpwr: internal use |
| */ |
| struct ieee80211_channel { |
| enum ieee80211_band band; |
| u16 center_freq; |
| u16 hw_value; |
| u32 flags; |
| int max_antenna_gain; |
| int max_power; |
| bool beacon_found; |
| u32 orig_flags; |
| int orig_mag, orig_mpwr; |
| }; |
| |
| /** |
| * enum ieee80211_rate_flags - rate flags |
| * |
| * Hardware/specification flags for rates. These are structured |
| * in a way that allows using the same bitrate structure for |
| * different bands/PHY modes. |
| * |
| * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short |
| * preamble on this bitrate; only relevant in 2.4GHz band and |
| * with CCK rates. |
| * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate |
| * when used with 802.11a (on the 5 GHz band); filled by the |
| * core code when registering the wiphy. |
| * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate |
| * when used with 802.11b (on the 2.4 GHz band); filled by the |
| * core code when registering the wiphy. |
| * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate |
| * when used with 802.11g (on the 2.4 GHz band); filled by the |
| * core code when registering the wiphy. |
| * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. |
| */ |
| enum ieee80211_rate_flags { |
| IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, |
| IEEE80211_RATE_MANDATORY_A = 1<<1, |
| IEEE80211_RATE_MANDATORY_B = 1<<2, |
| IEEE80211_RATE_MANDATORY_G = 1<<3, |
| IEEE80211_RATE_ERP_G = 1<<4, |
| }; |
| |
| /** |
| * struct ieee80211_rate - bitrate definition |
| * |
| * This structure describes a bitrate that an 802.11 PHY can |
| * operate with. The two values @hw_value and @hw_value_short |
| * are only for driver use when pointers to this structure are |
| * passed around. |
| * |
| * @flags: rate-specific flags |
| * @bitrate: bitrate in units of 100 Kbps |
| * @hw_value: driver/hardware value for this rate |
| * @hw_value_short: driver/hardware value for this rate when |
| * short preamble is used |
| */ |
| struct ieee80211_rate { |
| u32 flags; |
| u16 bitrate; |
| u16 hw_value, hw_value_short; |
| }; |
| |
| /** |
| * struct ieee80211_sta_ht_cap - STA's HT capabilities |
| * |
| * This structure describes most essential parameters needed |
| * to describe 802.11n HT capabilities for an STA. |
| * |
| * @ht_supported: is HT supported by the STA |
| * @cap: HT capabilities map as described in 802.11n spec |
| * @ampdu_factor: Maximum A-MPDU length factor |
| * @ampdu_density: Minimum A-MPDU spacing |
| * @mcs: Supported MCS rates |
| */ |
| struct ieee80211_sta_ht_cap { |
| u16 cap; /* use IEEE80211_HT_CAP_ */ |
| bool ht_supported; |
| u8 ampdu_factor; |
| u8 ampdu_density; |
| struct ieee80211_mcs_info mcs; |
| }; |
| |
| /** |
| * struct ieee80211_supported_band - frequency band definition |
| * |
| * This structure describes a frequency band a wiphy |
| * is able to operate in. |
| * |
| * @channels: Array of channels the hardware can operate in |
| * in this band. |
| * @band: the band this structure represents |
| * @n_channels: Number of channels in @channels |
| * @bitrates: Array of bitrates the hardware can operate with |
| * in this band. Must be sorted to give a valid "supported |
| * rates" IE, i.e. CCK rates first, then OFDM. |
| * @n_bitrates: Number of bitrates in @bitrates |
| * @ht_cap: HT capabilities in this band |
| */ |
| struct ieee80211_supported_band { |
| struct ieee80211_channel *channels; |
| struct ieee80211_rate *bitrates; |
| enum ieee80211_band band; |
| int n_channels; |
| int n_bitrates; |
| struct ieee80211_sta_ht_cap ht_cap; |
| }; |
| |
| /* |
| * Wireless hardware/device configuration structures and methods |
| */ |
| |
| /** |
| * DOC: Actions and configuration |
| * |
| * Each wireless device and each virtual interface offer a set of configuration |
| * operations and other actions that are invoked by userspace. Each of these |
| * actions is described in the operations structure, and the parameters these |
| * operations use are described separately. |
| * |
| * Additionally, some operations are asynchronous and expect to get status |
| * information via some functions that drivers need to call. |
| * |
| * Scanning and BSS list handling with its associated functionality is described |
| * in a separate chapter. |
| */ |
| |
| /** |
| * struct vif_params - describes virtual interface parameters |
| * @use_4addr: use 4-address frames |
| */ |
| struct vif_params { |
| int use_4addr; |
| }; |
| |
| /** |
| * struct key_params - key information |
| * |
| * Information about a key |
| * |
| * @key: key material |
| * @key_len: length of key material |
| * @cipher: cipher suite selector |
| * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used |
| * with the get_key() callback, must be in little endian, |
| * length given by @seq_len. |
| * @seq_len: length of @seq. |
| */ |
| struct key_params { |
| u8 *key; |
| u8 *seq; |
| int key_len; |
| int seq_len; |
| u32 cipher; |
| }; |
| |
| /** |
| * enum survey_info_flags - survey information flags |
| * |
| * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in |
| * @SURVEY_INFO_IN_USE: channel is currently being used |
| * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in |
| * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in |
| * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in |
| * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in |
| * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in |
| * |
| * Used by the driver to indicate which info in &struct survey_info |
| * it has filled in during the get_survey(). |
| */ |
| enum survey_info_flags { |
| SURVEY_INFO_NOISE_DBM = 1<<0, |
| SURVEY_INFO_IN_USE = 1<<1, |
| SURVEY_INFO_CHANNEL_TIME = 1<<2, |
| SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3, |
| SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4, |
| SURVEY_INFO_CHANNEL_TIME_RX = 1<<5, |
| SURVEY_INFO_CHANNEL_TIME_TX = 1<<6, |
| }; |
| |
| /** |
| * struct survey_info - channel survey response |
| * |
| * @channel: the channel this survey record reports, mandatory |
| * @filled: bitflag of flags from &enum survey_info_flags |
| * @noise: channel noise in dBm. This and all following fields are |
| * optional |
| * @channel_time: amount of time in ms the radio spent on the channel |
| * @channel_time_busy: amount of time the primary channel was sensed busy |
| * @channel_time_ext_busy: amount of time the extension channel was sensed busy |
| * @channel_time_rx: amount of time the radio spent receiving data |
| * @channel_time_tx: amount of time the radio spent transmitting data |
| * |
| * Used by dump_survey() to report back per-channel survey information. |
| * |
| * This structure can later be expanded with things like |
| * channel duty cycle etc. |
| */ |
| struct survey_info { |
| struct ieee80211_channel *channel; |
| u64 channel_time; |
| u64 channel_time_busy; |
| u64 channel_time_ext_busy; |
| u64 channel_time_rx; |
| u64 channel_time_tx; |
| u32 filled; |
| s8 noise; |
| }; |
| |
| /** |
| * struct cfg80211_crypto_settings - Crypto settings |
| * @wpa_versions: indicates which, if any, WPA versions are enabled |
| * (from enum nl80211_wpa_versions) |
| * @cipher_group: group key cipher suite (or 0 if unset) |
| * @n_ciphers_pairwise: number of AP supported unicast ciphers |
| * @ciphers_pairwise: unicast key cipher suites |
| * @n_akm_suites: number of AKM suites |
| * @akm_suites: AKM suites |
| * @control_port: Whether user space controls IEEE 802.1X port, i.e., |
| * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is |
| * required to assume that the port is unauthorized until authorized by |
| * user space. Otherwise, port is marked authorized by default. |
| * @control_port_ethertype: the control port protocol that should be |
| * allowed through even on unauthorized ports |
| * @control_port_no_encrypt: TRUE to prevent encryption of control port |
| * protocol frames. |
| */ |
| struct cfg80211_crypto_settings { |
| u32 wpa_versions; |
| u32 cipher_group; |
| int n_ciphers_pairwise; |
| u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES]; |
| int n_akm_suites; |
| u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; |
| bool control_port; |
| __be16 control_port_ethertype; |
| bool control_port_no_encrypt; |
| }; |
| |
| /** |
| * struct beacon_parameters - beacon parameters |
| * |
| * Used to configure the beacon for an interface. |
| * |
| * @head: head portion of beacon (before TIM IE) |
| * or %NULL if not changed |
| * @tail: tail portion of beacon (after TIM IE) |
| * or %NULL if not changed |
| * @interval: beacon interval or zero if not changed |
| * @dtim_period: DTIM period or zero if not changed |
| * @head_len: length of @head |
| * @tail_len: length of @tail |
| * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from |
| * user space) |
| * @ssid_len: length of @ssid |
| * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames |
| * @crypto: crypto settings |
| * @privacy: the BSS uses privacy |
| * @auth_type: Authentication type (algorithm) |
| * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL |
| * @beacon_ies_len: length of beacon_ies in octets |
| * @proberesp_ies: extra information element(s) to add into Probe Response |
| * frames or %NULL |
| * @proberesp_ies_len: length of proberesp_ies in octets |
| * @assocresp_ies: extra information element(s) to add into (Re)Association |
| * Response frames or %NULL |
| * @assocresp_ies_len: length of assocresp_ies in octets |
| */ |
| struct beacon_parameters { |
| u8 *head, *tail; |
| int interval, dtim_period; |
| int head_len, tail_len; |
| const u8 *ssid; |
| size_t ssid_len; |
| enum nl80211_hidden_ssid hidden_ssid; |
| struct cfg80211_crypto_settings crypto; |
| bool privacy; |
| enum nl80211_auth_type auth_type; |
| const u8 *beacon_ies; |
| size_t beacon_ies_len; |
| const u8 *proberesp_ies; |
| size_t proberesp_ies_len; |
| const u8 *assocresp_ies; |
| size_t assocresp_ies_len; |
| }; |
| |
| /** |
| * enum plink_action - actions to perform in mesh peers |
| * |
| * @PLINK_ACTION_INVALID: action 0 is reserved |
| * @PLINK_ACTION_OPEN: start mesh peer link establishment |
| * @PLINK_ACTION_BLOCK: block traffic from this mesh peer |
| */ |
| enum plink_actions { |
| PLINK_ACTION_INVALID, |
| PLINK_ACTION_OPEN, |
| PLINK_ACTION_BLOCK, |
| }; |
| |
| /** |
| * enum station_parameters_apply_mask - station parameter values to apply |
| * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) |
| * |
| * Not all station parameters have in-band "no change" signalling, |
| * for those that don't these flags will are used. |
| */ |
| enum station_parameters_apply_mask { |
| STATION_PARAM_APPLY_UAPSD = BIT(0), |
| }; |
| |
| /** |
| * struct station_parameters - station parameters |
| * |
| * Used to change and create a new station. |
| * |
| * @vlan: vlan interface station should belong to |
| * @supported_rates: supported rates in IEEE 802.11 format |
| * (or NULL for no change) |
| * @supported_rates_len: number of supported rates |
| * @sta_flags_mask: station flags that changed |
| * (bitmask of BIT(NL80211_STA_FLAG_...)) |
| * @sta_flags_set: station flags values |
| * (bitmask of BIT(NL80211_STA_FLAG_...)) |
| * @listen_interval: listen interval or -1 for no change |
| * @aid: AID or zero for no change |
| * @plink_action: plink action to take |
| * @plink_state: set the peer link state for a station |
| * @ht_capa: HT capabilities of station |
| * @uapsd_queues: bitmap of queues configured for uapsd. same format |
| * as the AC bitmap in the QoS info field |
| * @max_sp: max Service Period. same format as the MAX_SP in the |
| * QoS info field (but already shifted down) |
| * @sta_modify_mask: bitmap indicating which parameters changed |
| * (for those that don't have a natural "no change" value), |
| * see &enum station_parameters_apply_mask |
| */ |
| struct station_parameters { |
| u8 *supported_rates; |
| struct net_device *vlan; |
| u32 sta_flags_mask, sta_flags_set; |
| u32 sta_modify_mask; |
| int listen_interval; |
| u16 aid; |
| u8 supported_rates_len; |
| u8 plink_action; |
| u8 plink_state; |
| struct ieee80211_ht_cap *ht_capa; |
| u8 uapsd_queues; |
| u8 max_sp; |
| }; |
| |
| /** |
| * enum station_info_flags - station information flags |
| * |
| * Used by the driver to indicate which info in &struct station_info |
| * it has filled in during get_station() or dump_station(). |
| * |
| * @STATION_INFO_INACTIVE_TIME: @inactive_time filled |
| * @STATION_INFO_RX_BYTES: @rx_bytes filled |
| * @STATION_INFO_TX_BYTES: @tx_bytes filled |
| * @STATION_INFO_LLID: @llid filled |
| * @STATION_INFO_PLID: @plid filled |
| * @STATION_INFO_PLINK_STATE: @plink_state filled |
| * @STATION_INFO_SIGNAL: @signal filled |
| * @STATION_INFO_TX_BITRATE: @txrate fields are filled |
| * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs) |
| * @STATION_INFO_RX_PACKETS: @rx_packets filled |
| * @STATION_INFO_TX_PACKETS: @tx_packets filled |
| * @STATION_INFO_TX_RETRIES: @tx_retries filled |
| * @STATION_INFO_TX_FAILED: @tx_failed filled |
| * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled |
| * @STATION_INFO_SIGNAL_AVG: @signal_avg filled |
| * @STATION_INFO_RX_BITRATE: @rxrate fields are filled |
| * @STATION_INFO_BSS_PARAM: @bss_param filled |
| * @STATION_INFO_CONNECTED_TIME: @connected_time filled |
| * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled |
| * @STATION_INFO_STA_FLAGS: @sta_flags filled |
| */ |
| enum station_info_flags { |
| STATION_INFO_INACTIVE_TIME = 1<<0, |
| STATION_INFO_RX_BYTES = 1<<1, |
| STATION_INFO_TX_BYTES = 1<<2, |
| STATION_INFO_LLID = 1<<3, |
| STATION_INFO_PLID = 1<<4, |
| STATION_INFO_PLINK_STATE = 1<<5, |
| STATION_INFO_SIGNAL = 1<<6, |
| STATION_INFO_TX_BITRATE = 1<<7, |
| STATION_INFO_RX_PACKETS = 1<<8, |
| STATION_INFO_TX_PACKETS = 1<<9, |
| STATION_INFO_TX_RETRIES = 1<<10, |
| STATION_INFO_TX_FAILED = 1<<11, |
| STATION_INFO_RX_DROP_MISC = 1<<12, |
| STATION_INFO_SIGNAL_AVG = 1<<13, |
| STATION_INFO_RX_BITRATE = 1<<14, |
| STATION_INFO_BSS_PARAM = 1<<15, |
| STATION_INFO_CONNECTED_TIME = 1<<16, |
| STATION_INFO_ASSOC_REQ_IES = 1<<17, |
| STATION_INFO_STA_FLAGS = 1<<18 |
| }; |
| |
| /** |
| * enum station_info_rate_flags - bitrate info flags |
| * |
| * Used by the driver to indicate the specific rate transmission |
| * type for 802.11n transmissions. |
| * |
| * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled |
| * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission |
| * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval |
| */ |
| enum rate_info_flags { |
| RATE_INFO_FLAGS_MCS = 1<<0, |
| RATE_INFO_FLAGS_40_MHZ_WIDTH = 1<<1, |
| RATE_INFO_FLAGS_SHORT_GI = 1<<2, |
| }; |
| |
| /** |
| * struct rate_info - bitrate information |
| * |
| * Information about a receiving or transmitting bitrate |
| * |
| * @flags: bitflag of flags from &enum rate_info_flags |
| * @mcs: mcs index if struct describes a 802.11n bitrate |
| * @legacy: bitrate in 100kbit/s for 802.11abg |
| */ |
| struct rate_info { |
| u8 flags; |
| u8 mcs; |
| u16 legacy; |
| }; |
| |
| /** |
| * enum station_info_rate_flags - bitrate info flags |
| * |
| * Used by the driver to indicate the specific rate transmission |
| * type for 802.11n transmissions. |
| * |
| * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled |
| * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled |
| * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled |
| */ |
| enum bss_param_flags { |
| BSS_PARAM_FLAGS_CTS_PROT = 1<<0, |
| BSS_PARAM_FLAGS_SHORT_PREAMBLE = 1<<1, |
| BSS_PARAM_FLAGS_SHORT_SLOT_TIME = 1<<2, |
| }; |
| |
| /** |
| * struct sta_bss_parameters - BSS parameters for the attached station |
| * |
| * Information about the currently associated BSS |
| * |
| * @flags: bitflag of flags from &enum bss_param_flags |
| * @dtim_period: DTIM period for the BSS |
| * @beacon_interval: beacon interval |
| */ |
| struct sta_bss_parameters { |
| u8 flags; |
| u8 dtim_period; |
| u16 beacon_interval; |
| }; |
| |
| /** |
| * struct station_info - station information |
| * |
| * Station information filled by driver for get_station() and dump_station. |
| * |
| * @filled: bitflag of flags from &enum station_info_flags |
| * @connected_time: time(in secs) since a station is last connected |
| * @inactive_time: time since last station activity (tx/rx) in milliseconds |
| * @rx_bytes: bytes received from this station |
| * @tx_bytes: bytes transmitted to this station |
| * @llid: mesh local link id |
| * @plid: mesh peer link id |
| * @plink_state: mesh peer link state |
| * @signal: signal strength of last received packet in dBm |
| * @signal_avg: signal strength average in dBm |
| * @txrate: current unicast bitrate from this station |
| * @rxrate: current unicast bitrate to this station |
| * @rx_packets: packets received from this station |
| * @tx_packets: packets transmitted to this station |
| * @tx_retries: cumulative retry counts |
| * @tx_failed: number of failed transmissions (retries exceeded, no ACK) |
| * @rx_dropped_misc: Dropped for un-specified reason. |
| * @bss_param: current BSS parameters |
| * @generation: generation number for nl80211 dumps. |
| * This number should increase every time the list of stations |
| * changes, i.e. when a station is added or removed, so that |
| * userspace can tell whether it got a consistent snapshot. |
| * @assoc_req_ies: IEs from (Re)Association Request. |
| * This is used only when in AP mode with drivers that do not use |
| * user space MLME/SME implementation. The information is provided for |
| * the cfg80211_new_sta() calls to notify user space of the IEs. |
| * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets. |
| * @sta_flags: station flags mask & values |
| */ |
| struct station_info { |
| u32 filled; |
| u32 connected_time; |
| u32 inactive_time; |
| u32 rx_bytes; |
| u32 tx_bytes; |
| u16 llid; |
| u16 plid; |
| u8 plink_state; |
| s8 signal; |
| s8 signal_avg; |
| struct rate_info txrate; |
| struct rate_info rxrate; |
| u32 rx_packets; |
| u32 tx_packets; |
| u32 tx_retries; |
| u32 tx_failed; |
| u32 rx_dropped_misc; |
| struct sta_bss_parameters bss_param; |
| struct nl80211_sta_flag_update sta_flags; |
| |
| int generation; |
| |
| const u8 *assoc_req_ies; |
| size_t assoc_req_ies_len; |
| |
| /* |
| * Note: Add a new enum station_info_flags value for each new field and |
| * use it to check which fields are initialized. |
| */ |
| }; |
| |
| /** |
| * enum monitor_flags - monitor flags |
| * |
| * Monitor interface configuration flags. Note that these must be the bits |
| * according to the nl80211 flags. |
| * |
| * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS |
| * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP |
| * @MONITOR_FLAG_CONTROL: pass control frames |
| * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering |
| * @MONITOR_FLAG_COOK_FRAMES: report frames after processing |
| */ |
| enum monitor_flags { |
| MONITOR_FLAG_FCSFAIL = 1<<NL80211_MNTR_FLAG_FCSFAIL, |
| MONITOR_FLAG_PLCPFAIL = 1<<NL80211_MNTR_FLAG_PLCPFAIL, |
| MONITOR_FLAG_CONTROL = 1<<NL80211_MNTR_FLAG_CONTROL, |
| MONITOR_FLAG_OTHER_BSS = 1<<NL80211_MNTR_FLAG_OTHER_BSS, |
| MONITOR_FLAG_COOK_FRAMES = 1<<NL80211_MNTR_FLAG_COOK_FRAMES, |
| }; |
| |
| /** |
| * enum mpath_info_flags - mesh path information flags |
| * |
| * Used by the driver to indicate which info in &struct mpath_info it has filled |
| * in during get_station() or dump_station(). |
| * |
| * @MPATH_INFO_FRAME_QLEN: @frame_qlen filled |
| * @MPATH_INFO_SN: @sn filled |
| * @MPATH_INFO_METRIC: @metric filled |
| * @MPATH_INFO_EXPTIME: @exptime filled |
| * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled |
| * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled |
| * @MPATH_INFO_FLAGS: @flags filled |
| */ |
| enum mpath_info_flags { |
| MPATH_INFO_FRAME_QLEN = BIT(0), |
| MPATH_INFO_SN = BIT(1), |
| MPATH_INFO_METRIC = BIT(2), |
| MPATH_INFO_EXPTIME = BIT(3), |
| MPATH_INFO_DISCOVERY_TIMEOUT = BIT(4), |
| MPATH_INFO_DISCOVERY_RETRIES = BIT(5), |
| MPATH_INFO_FLAGS = BIT(6), |
| }; |
| |
| /** |
| * struct mpath_info - mesh path information |
| * |
| * Mesh path information filled by driver for get_mpath() and dump_mpath(). |
| * |
| * @filled: bitfield of flags from &enum mpath_info_flags |
| * @frame_qlen: number of queued frames for this destination |
| * @sn: target sequence number |
| * @metric: metric (cost) of this mesh path |
| * @exptime: expiration time for the mesh path from now, in msecs |
| * @flags: mesh path flags |
| * @discovery_timeout: total mesh path discovery timeout, in msecs |
| * @discovery_retries: mesh path discovery retries |
| * @generation: generation number for nl80211 dumps. |
| * This number should increase every time the list of mesh paths |
| * changes, i.e. when a station is added or removed, so that |
| * userspace can tell whether it got a consistent snapshot. |
| */ |
| struct mpath_info { |
| u32 filled; |
| u32 frame_qlen; |
| u32 sn; |
| u32 metric; |
| u32 exptime; |
| u32 discovery_timeout; |
| u8 discovery_retries; |
| u8 flags; |
| |
| int generation; |
| }; |
| |
| /** |
| * struct bss_parameters - BSS parameters |
| * |
| * Used to change BSS parameters (mainly for AP mode). |
| * |
| * @use_cts_prot: Whether to use CTS protection |
| * (0 = no, 1 = yes, -1 = do not change) |
| * @use_short_preamble: Whether the use of short preambles is allowed |
| * (0 = no, 1 = yes, -1 = do not change) |
| * @use_short_slot_time: Whether the use of short slot time is allowed |
| * (0 = no, 1 = yes, -1 = do not change) |
| * @basic_rates: basic rates in IEEE 802.11 format |
| * (or NULL for no change) |
| * @basic_rates_len: number of basic rates |
| * @ap_isolate: do not forward packets between connected stations |
| * @ht_opmode: HT Operation mode |
| * (u16 = opmode, -1 = do not change) |
| */ |
| struct bss_parameters { |
| int use_cts_prot; |
| int use_short_preamble; |
| int use_short_slot_time; |
| u8 *basic_rates; |
| u8 basic_rates_len; |
| int ap_isolate; |
| int ht_opmode; |
| }; |
| |
| /* |
| * struct mesh_config - 802.11s mesh configuration |
| * |
| * These parameters can be changed while the mesh is active. |
| */ |
| struct mesh_config { |
| /* Timeouts in ms */ |
| /* Mesh plink management parameters */ |
| u16 dot11MeshRetryTimeout; |
| u16 dot11MeshConfirmTimeout; |
| u16 dot11MeshHoldingTimeout; |
| u16 dot11MeshMaxPeerLinks; |
| u8 dot11MeshMaxRetries; |
| u8 dot11MeshTTL; |
| /* ttl used in path selection information elements */ |
| u8 element_ttl; |
| bool auto_open_plinks; |
| /* HWMP parameters */ |
| u8 dot11MeshHWMPmaxPREQretries; |
| u32 path_refresh_time; |
| u16 min_discovery_timeout; |
| u32 dot11MeshHWMPactivePathTimeout; |
| u16 dot11MeshHWMPpreqMinInterval; |
| u16 dot11MeshHWMPnetDiameterTraversalTime; |
| u8 dot11MeshHWMPRootMode; |
| u16 dot11MeshHWMPRannInterval; |
| /* This is missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol |
| * set to true only means that the station will announce others it's a |
| * mesh gate, but not necessarily using the gate announcement protocol. |
| * Still keeping the same nomenclature to be in sync with the spec. */ |
| bool dot11MeshGateAnnouncementProtocol; |
| }; |
| |
| /** |
| * struct mesh_setup - 802.11s mesh setup configuration |
| * @mesh_id: the mesh ID |
| * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes |
| * @path_sel_proto: which path selection protocol to use |
| * @path_metric: which metric to use |
| * @ie: vendor information elements (optional) |
| * @ie_len: length of vendor information elements |
| * @is_authenticated: this mesh requires authentication |
| * @is_secure: this mesh uses security |
| * |
| * These parameters are fixed when the mesh is created. |
| */ |
| struct mesh_setup { |
| const u8 *mesh_id; |
| u8 mesh_id_len; |
| u8 path_sel_proto; |
| u8 path_metric; |
| const u8 *ie; |
| u8 ie_len; |
| bool is_authenticated; |
| bool is_secure; |
| }; |
| |
| /** |
| * struct ieee80211_txq_params - TX queue parameters |
| * @queue: TX queue identifier (NL80211_TXQ_Q_*) |
| * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled |
| * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range |
| * 1..32767] |
| * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range |
| * 1..32767] |
| * @aifs: Arbitration interframe space [0..255] |
| */ |
| struct ieee80211_txq_params { |
| enum nl80211_txq_q queue; |
| u16 txop; |
| u16 cwmin; |
| u16 cwmax; |
| u8 aifs; |
| }; |
| |
| /* from net/wireless.h */ |
| struct wiphy; |
| |
| /** |
| * DOC: Scanning and BSS list handling |
| * |
| * The scanning process itself is fairly simple, but cfg80211 offers quite |
| * a bit of helper functionality. To start a scan, the scan operation will |
| * be invoked with a scan definition. This scan definition contains the |
| * channels to scan, and the SSIDs to send probe requests for (including the |
| * wildcard, if desired). A passive scan is indicated by having no SSIDs to |
| * probe. Additionally, a scan request may contain extra information elements |
| * that should be added to the probe request. The IEs are guaranteed to be |
| * well-formed, and will not exceed the maximum length the driver advertised |
| * in the wiphy structure. |
| * |
| * When scanning finds a BSS, cfg80211 needs to be notified of that, because |
| * it is responsible for maintaining the BSS list; the driver should not |
| * maintain a list itself. For this notification, various functions exist. |
| * |
| * Since drivers do not maintain a BSS list, there are also a number of |
| * functions to search for a BSS and obtain information about it from the |
| * BSS structure cfg80211 maintains. The BSS list is also made available |
| * to userspace. |
| */ |
| |
| /** |
| * struct cfg80211_ssid - SSID description |
| * @ssid: the SSID |
| * @ssid_len: length of the ssid |
| */ |
| struct cfg80211_ssid { |
| u8 ssid[IEEE80211_MAX_SSID_LEN]; |
| u8 ssid_len; |
| }; |
| |
| /** |
| * struct cfg80211_scan_request - scan request description |
| * |
| * @ssids: SSIDs to scan for (active scan only) |
| * @n_ssids: number of SSIDs |
| * @channels: channels to scan on. |
| * @n_channels: total number of channels to scan |
| * @ie: optional information element(s) to add into Probe Request or %NULL |
| * @ie_len: length of ie in octets |
| * @rates: bitmap of rates to advertise for each band |
| * @wiphy: the wiphy this was for |
| * @dev: the interface |
| * @aborted: (internal) scan request was notified as aborted |
| * @no_cck: used to send probe requests at non CCK rate in 2GHz band |
| */ |
| struct cfg80211_scan_request { |
| struct cfg80211_ssid *ssids; |
| int n_ssids; |
| u32 n_channels; |
| const u8 *ie; |
| size_t ie_len; |
| |
| u32 rates[IEEE80211_NUM_BANDS]; |
| |
| /* internal */ |
| struct wiphy *wiphy; |
| struct net_device *dev; |
| bool aborted; |
| bool no_cck; |
| |
| /* keep last */ |
| struct ieee80211_channel *channels[0]; |
| }; |
| |
| /** |
| * struct cfg80211_match_set - sets of attributes to match |
| * |
| * @ssid: SSID to be matched |
| */ |
| struct cfg80211_match_set { |
| struct cfg80211_ssid ssid; |
| }; |
| |
| /** |
| * struct cfg80211_sched_scan_request - scheduled scan request description |
| * |
| * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans) |
| * @n_ssids: number of SSIDs |
| * @n_channels: total number of channels to scan |
| * @interval: interval between each scheduled scan cycle |
| * @ie: optional information element(s) to add into Probe Request or %NULL |
| * @ie_len: length of ie in octets |
| * @match_sets: sets of parameters to be matched for a scan result |
| * entry to be considered valid and to be passed to the host |
| * (others are filtered out). |
| * If ommited, all results are passed. |
| * @n_match_sets: number of match sets |
| * @wiphy: the wiphy this was for |
| * @dev: the interface |
| * @channels: channels to scan |
| */ |
| struct cfg80211_sched_scan_request { |
| struct cfg80211_ssid *ssids; |
| int n_ssids; |
| u32 n_channels; |
| u32 interval; |
| const u8 *ie; |
| size_t ie_len; |
| struct cfg80211_match_set *match_sets; |
| int n_match_sets; |
| |
| /* internal */ |
| struct wiphy *wiphy; |
| struct net_device *dev; |
| |
| /* keep last */ |
| struct ieee80211_channel *channels[0]; |
| }; |
| |
| /** |
| * enum cfg80211_signal_type - signal type |
| * |
| * @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available |
| * @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm) |
| * @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100 |
| */ |
| enum cfg80211_signal_type { |
| CFG80211_SIGNAL_TYPE_NONE, |
| CFG80211_SIGNAL_TYPE_MBM, |
| CFG80211_SIGNAL_TYPE_UNSPEC, |
| }; |
| |
| /** |
| * struct cfg80211_bss - BSS description |
| * |
| * This structure describes a BSS (which may also be a mesh network) |
| * for use in scan results and similar. |
| * |
| * @channel: channel this BSS is on |
| * @bssid: BSSID of the BSS |
| * @tsf: timestamp of last received update |
| * @beacon_interval: the beacon interval as from the frame |
| * @capability: the capability field in host byte order |
| * @information_elements: the information elements (Note that there |
| * is no guarantee that these are well-formed!); this is a pointer to |
| * either the beacon_ies or proberesp_ies depending on whether Probe |
| * Response frame has been received |
| * @len_information_elements: total length of the information elements |
| * @beacon_ies: the information elements from the last Beacon frame |
| * @len_beacon_ies: total length of the beacon_ies |
| * @proberesp_ies: the information elements from the last Probe Response frame |
| * @len_proberesp_ies: total length of the proberesp_ies |
| * @signal: signal strength value (type depends on the wiphy's signal_type) |
| * @free_priv: function pointer to free private data |
| * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes |
| */ |
| struct cfg80211_bss { |
| struct ieee80211_channel *channel; |
| |
| u8 bssid[ETH_ALEN]; |
| u64 tsf; |
| u16 beacon_interval; |
| u16 capability; |
| u8 *information_elements; |
| size_t len_information_elements; |
| u8 *beacon_ies; |
| size_t len_beacon_ies; |
| u8 *proberesp_ies; |
| size_t len_proberesp_ies; |
| |
| s32 signal; |
| |
| void (*free_priv)(struct cfg80211_bss *bss); |
| u8 priv[0] __attribute__((__aligned__(sizeof(void *)))); |
| }; |
| |
| /** |
| * ieee80211_bss_get_ie - find IE with given ID |
| * @bss: the bss to search |
| * @ie: the IE ID |
| * Returns %NULL if not found. |
| */ |
| const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); |
| |
| |
| /** |
| * struct cfg80211_auth_request - Authentication request data |
| * |
| * This structure provides information needed to complete IEEE 802.11 |
| * authentication. |
| * |
| * @bss: The BSS to authenticate with. |
| * @auth_type: Authentication type (algorithm) |
| * @ie: Extra IEs to add to Authentication frame or %NULL |
| * @ie_len: Length of ie buffer in octets |
| * @key_len: length of WEP key for shared key authentication |
| * @key_idx: index of WEP key for shared key authentication |
| * @key: WEP key for shared key authentication |
| * @local_state_change: This is a request for a local state only, i.e., no |
| * Authentication frame is to be transmitted and authentication state is |
| * to be changed without having to wait for a response from the peer STA |
| * (AP). |
| */ |
| struct cfg80211_auth_request { |
| struct cfg80211_bss *bss; |
| const u8 *ie; |
| size_t ie_len; |
| enum nl80211_auth_type auth_type; |
| const u8 *key; |
| u8 key_len, key_idx; |
| bool local_state_change; |
| }; |
| |
| /** |
| * struct cfg80211_assoc_request - (Re)Association request data |
| * |
| * This structure provides information needed to complete IEEE 802.11 |
| * (re)association. |
| * @bss: The BSS to associate with. |
| * @ie: Extra IEs to add to (Re)Association Request frame or %NULL |
| * @ie_len: Length of ie buffer in octets |
| * @use_mfp: Use management frame protection (IEEE 802.11w) in this association |
| * @crypto: crypto settings |
| * @prev_bssid: previous BSSID, if not %NULL use reassociate frame |
| */ |
| struct cfg80211_assoc_request { |
| struct cfg80211_bss *bss; |
| const u8 *ie, *prev_bssid; |
| size_t ie_len; |
| struct cfg80211_crypto_settings crypto; |
| bool use_mfp; |
| }; |
| |
| /** |
| * struct cfg80211_deauth_request - Deauthentication request data |
| * |
| * This structure provides information needed to complete IEEE 802.11 |
| * deauthentication. |
| * |
| * @bss: the BSS to deauthenticate from |
| * @ie: Extra IEs to add to Deauthentication frame or %NULL |
| * @ie_len: Length of ie buffer in octets |
| * @reason_code: The reason code for the deauthentication |
| * @local_state_change: This is a request for a local state only, i.e., no |
| * Deauthentication frame is to be transmitted. |
| */ |
| struct cfg80211_deauth_request { |
| struct cfg80211_bss *bss; |
| const u8 *ie; |
| size_t ie_len; |
| u16 reason_code; |
| bool local_state_change; |
| }; |
| |
| /** |
| * struct cfg80211_disassoc_request - Disassociation request data |
| * |
| * This structure provides information needed to complete IEEE 802.11 |
| * disassocation. |
| * |
| * @bss: the BSS to disassociate from |
| * @ie: Extra IEs to add to Disassociation frame or %NULL |
| * @ie_len: Length of ie buffer in octets |
| * @reason_code: The reason code for the disassociation |
| * @local_state_change: This is a request for a local state only, i.e., no |
| * Disassociation frame is to be transmitted. |
| */ |
| struct cfg80211_disassoc_request { |
| struct cfg80211_bss *bss; |
| const u8 *ie; |
| size_t ie_len; |
| u16 reason_code; |
| bool local_state_change; |
| }; |
| |
| /** |
| * struct cfg80211_ibss_params - IBSS parameters |
| * |
| * This structure defines the IBSS parameters for the join_ibss() |
| * method. |
| * |
| * @ssid: The SSID, will always be non-null. |
| * @ssid_len: The length of the SSID, will always be non-zero. |
| * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not |
| * search for IBSSs with a different BSSID. |
| * @channel: The channel to use if no IBSS can be found to join. |
| * @channel_fixed: The channel should be fixed -- do not search for |
| * IBSSs to join on other channels. |
| * @ie: information element(s) to include in the beacon |
| * @ie_len: length of that |
| * @beacon_interval: beacon interval to use |
| * @privacy: this is a protected network, keys will be configured |
| * after joining |
| * @basic_rates: bitmap of basic rates to use when creating the IBSS |
| * @mcast_rate: per-band multicast rate index + 1 (0: disabled) |
| */ |
| struct cfg80211_ibss_params { |
| u8 *ssid; |
| u8 *bssid; |
| struct ieee80211_channel *channel; |
| u8 *ie; |
| u8 ssid_len, ie_len; |
| u16 beacon_interval; |
| u32 basic_rates; |
| bool channel_fixed; |
| bool privacy; |
| int mcast_rate[IEEE80211_NUM_BANDS]; |
| }; |
| |
| /** |
| * struct cfg80211_connect_params - Connection parameters |
| * |
| * This structure provides information needed to complete IEEE 802.11 |
| * authentication and association. |
| * |
| * @channel: The channel to use or %NULL if not specified (auto-select based |
| * on scan results) |
| * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan |
| * results) |
| * @ssid: SSID |
| * @ssid_len: Length of ssid in octets |
| * @auth_type: Authentication type (algorithm) |
| * @ie: IEs for association request |
| * @ie_len: Length of assoc_ie in octets |
| * @privacy: indicates whether privacy-enabled APs should be used |
| * @crypto: crypto settings |
| * @key_len: length of WEP key for shared key authentication |
| * @key_idx: index of WEP key for shared key authentication |
| * @key: WEP key for shared key authentication |
| */ |
| struct cfg80211_connect_params { |
| struct ieee80211_channel *channel; |
| u8 *bssid; |
| u8 *ssid; |
| size_t ssid_len; |
| enum nl80211_auth_type auth_type; |
| u8 *ie; |
| size_t ie_len; |
| bool privacy; |
| struct cfg80211_crypto_settings crypto; |
| const u8 *key; |
| u8 key_len, key_idx; |
| }; |
| |
| /** |
| * enum wiphy_params_flags - set_wiphy_params bitfield values |
| * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed |
| * @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed |
| * @WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed |
| * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed |
| * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed |
| */ |
| enum wiphy_params_flags { |
| WIPHY_PARAM_RETRY_SHORT = 1 << 0, |
| WIPHY_PARAM_RETRY_LONG = 1 << 1, |
| WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2, |
| WIPHY_PARAM_RTS_THRESHOLD = 1 << 3, |
| WIPHY_PARAM_COVERAGE_CLASS = 1 << 4, |
| }; |
| |
| /* |
| * cfg80211_bitrate_mask - masks for bitrate control |
| */ |
| struct cfg80211_bitrate_mask { |
| struct { |
| u32 legacy; |
| /* TODO: add support for masking MCS rates; e.g.: */ |
| /* u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; */ |
| } control[IEEE80211_NUM_BANDS]; |
| }; |
| /** |
| * struct cfg80211_pmksa - PMK Security Association |
| * |
| * This structure is passed to the set/del_pmksa() method for PMKSA |
| * caching. |
| * |
| * @bssid: The AP's BSSID. |
| * @pmkid: The PMK material itself. |
| */ |
| struct cfg80211_pmksa { |
| u8 *bssid; |
| u8 *pmkid; |
| }; |
| |
| /** |
| * struct cfg80211_wowlan_trig_pkt_pattern - packet pattern |
| * @mask: bitmask where to match pattern and where to ignore bytes, |
| * one bit per byte, in same format as nl80211 |
| * @pattern: bytes to match where bitmask is 1 |
| * @pattern_len: length of pattern (in bytes) |
| * |
| * Internal note: @mask and @pattern are allocated in one chunk of |
| * memory, free @mask only! |
| */ |
| struct cfg80211_wowlan_trig_pkt_pattern { |
| u8 *mask, *pattern; |
| int pattern_len; |
| }; |
| |
| /** |
| * struct cfg80211_wowlan - Wake on Wireless-LAN support info |
| * |
| * This structure defines the enabled WoWLAN triggers for the device. |
| * @any: wake up on any activity -- special trigger if device continues |
| * operating as normal during suspend |
| * @disconnect: wake up if getting disconnected |
| * @magic_pkt: wake up on receiving magic packet |
| * @patterns: wake up on receiving packet matching a pattern |
| * @n_patterns: number of patterns |
| * @gtk_rekey_failure: wake up on GTK rekey failure |
| * @eap_identity_req: wake up on EAP identity request packet |
| * @four_way_handshake: wake up on 4-way handshake |
| * @rfkill_release: wake up when rfkill is released |
| */ |
| struct cfg80211_wowlan { |
| bool any, disconnect, magic_pkt, gtk_rekey_failure, |
| eap_identity_req, four_way_handshake, |
| rfkill_release; |
| struct cfg80211_wowlan_trig_pkt_pattern *patterns; |
| int n_patterns; |
| }; |
| |
| /** |
| * struct cfg80211_gtk_rekey_data - rekey data |
| * @kek: key encryption key |
| * @kck: key confirmation key |
| * @replay_ctr: replay counter |
| */ |
| struct cfg80211_gtk_rekey_data { |
| u8 kek[NL80211_KEK_LEN]; |
| u8 kck[NL80211_KCK_LEN]; |
| u8 replay_ctr[NL80211_REPLAY_CTR_LEN]; |
| }; |
| |
| /** |
| * struct cfg80211_ops - backend description for wireless configuration |
| * |
| * This struct is registered by fullmac card drivers and/or wireless stacks |
| * in order to handle configuration requests on their interfaces. |
| * |
| * All callbacks except where otherwise noted should return 0 |
| * on success or a negative error code. |
| * |
| * All operations are currently invoked under rtnl for consistency with the |
| * wireless extensions but this is subject to reevaluation as soon as this |
| * code is used more widely and we have a first user without wext. |
| * |
| * @suspend: wiphy device needs to be suspended. The variable @wow will |
| * be %NULL or contain the enabled Wake-on-Wireless triggers that are |
| * configured for the device. |
| * @resume: wiphy device needs to be resumed |
| * |
| * @add_virtual_intf: create a new virtual interface with the given name, |
| * must set the struct wireless_dev's iftype. Beware: You must create |
| * the new netdev in the wiphy's network namespace! Returns the netdev, |
| * or an ERR_PTR. |
| * |
| * @del_virtual_intf: remove the virtual interface determined by ifindex. |
| * |
| * @change_virtual_intf: change type/configuration of virtual interface, |
| * keep the struct wireless_dev's iftype updated. |
| * |
| * @add_key: add a key with the given parameters. @mac_addr will be %NULL |
| * when adding a group key. |
| * |
| * @get_key: get information about the key with the given parameters. |
| * @mac_addr will be %NULL when requesting information for a group |
| * key. All pointers given to the @callback function need not be valid |
| * after it returns. This function should return an error if it is |
| * not possible to retrieve the key, -ENOENT if it doesn't exist. |
| * |
| * @del_key: remove a key given the @mac_addr (%NULL for a group key) |
| * and @key_index, return -ENOENT if the key doesn't exist. |
| * |
| * @set_default_key: set the default key on an interface |
| * |
| * @set_default_mgmt_key: set the default management frame key on an interface |
| * |
| * @set_rekey_data: give the data necessary for GTK rekeying to the driver |
| * |
| * @add_beacon: Add a beacon with given parameters, @head, @interval |
| * and @dtim_period will be valid, @tail is optional. |
| * @set_beacon: Change the beacon parameters for an access point mode |
| * interface. This should reject the call when no beacon has been |
| * configured. |
| * @del_beacon: Remove beacon configuration and stop sending the beacon. |
| * |
| * @add_station: Add a new station. |
| * @del_station: Remove a station; @mac may be NULL to remove all stations. |
| * @change_station: Modify a given station. |
| * @get_station: get station information for the station identified by @mac |
| * @dump_station: dump station callback -- resume dump at index @idx |
| * |
| * @add_mpath: add a fixed mesh path |
| * @del_mpath: delete a given mesh path |
| * @change_mpath: change a given mesh path |
| * @get_mpath: get a mesh path for the given parameters |
| * @dump_mpath: dump mesh path callback -- resume dump at index @idx |
| * @join_mesh: join the mesh network with the specified parameters |
| * @leave_mesh: leave the current mesh network |
| * |
| * @get_mesh_config: Get the current mesh configuration |
| * |
| * @update_mesh_config: Update mesh parameters on a running mesh. |
| * The mask is a bitfield which tells us which parameters to |
| * set, and which to leave alone. |
| * |
| * @change_bss: Modify parameters for a given BSS. |
| * |
| * @set_txq_params: Set TX queue parameters |
| * |
| * @set_channel: Set channel for a given wireless interface. Some devices |
| * may support multi-channel operation (by channel hopping) so cfg80211 |
| * doesn't verify much. Note, however, that the passed netdev may be |
| * %NULL as well if the user requested changing the channel for the |
| * device itself, or for a monitor interface. |
| * |
| * @scan: Request to do a scan. If returning zero, the scan request is given |
| * the driver, and will be valid until passed to cfg80211_scan_done(). |
| * For scan results, call cfg80211_inform_bss(); you can call this outside |
| * the scan/scan_done bracket too. |
| * |
| * @auth: Request to authenticate with the specified peer |
| * @assoc: Request to (re)associate with the specified peer |
| * @deauth: Request to deauthenticate from the specified peer |
| * @disassoc: Request to disassociate from the specified peer |
| * |
| * @connect: Connect to the ESS with the specified parameters. When connected, |
| * call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS. |
| * If the connection fails for some reason, call cfg80211_connect_result() |
| * with the status from the AP. |
| * @disconnect: Disconnect from the BSS/ESS. |
| * |
| * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call |
| * cfg80211_ibss_joined(), also call that function when changing BSSID due |
| * to a merge. |
| * @leave_ibss: Leave the IBSS. |
| * |
| * @set_wiphy_params: Notify that wiphy parameters have changed; |
| * @changed bitfield (see &enum wiphy_params_flags) describes which values |
| * have changed. The actual parameter values are available in |
| * struct wiphy. If returning an error, no value should be changed. |
| * |
| * @set_tx_power: set the transmit power according to the parameters |
| * @get_tx_power: store the current TX power into the dbm variable; |
| * return 0 if successful |
| * |
| * @set_wds_peer: set the WDS peer for a WDS interface |
| * |
| * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting |
| * functions to adjust rfkill hw state |
| * |
| * @dump_survey: get site survey information. |
| * |
| * @remain_on_channel: Request the driver to remain awake on the specified |
| * channel for the specified duration to complete an off-channel |
| * operation (e.g., public action frame exchange). When the driver is |
| * ready on the requested channel, it must indicate this with an event |
| * notification by calling cfg80211_ready_on_channel(). |
| * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation. |
| * This allows the operation to be terminated prior to timeout based on |
| * the duration value. |
| * @mgmt_tx: Transmit a management frame. |
| * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management |
| * frame on another channel |
| * |
| * @testmode_cmd: run a test mode command |
| * @testmode_dump: Implement a test mode dump. The cb->args[2] and up may be |
| * used by the function, but 0 and 1 must not be touched. Additionally, |
| * return error codes other than -ENOBUFS and -ENOENT will terminate the |
| * dump and return to userspace with an error, so be careful. If any data |
| * was passed in from userspace then the data/len arguments will be present |
| * and point to the data contained in %NL80211_ATTR_TESTDATA. |
| * |
| * @set_bitrate_mask: set the bitrate mask configuration |
| * |
| * @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac |
| * devices running firmwares capable of generating the (re) association |
| * RSN IE. It allows for faster roaming between WPA2 BSSIDs. |
| * @del_pmksa: Delete a cached PMKID. |
| * @flush_pmksa: Flush all cached PMKIDs. |
| * @set_power_mgmt: Configure WLAN power management. A timeout value of -1 |
| * allows the driver to adjust the dynamic ps timeout value. |
| * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold. |
| * @sched_scan_start: Tell the driver to start a scheduled scan. |
| * @sched_scan_stop: Tell the driver to stop an ongoing scheduled |
| * scan. The driver_initiated flag specifies whether the driver |
| * itself has informed that the scan has stopped. |
| * |
| * @mgmt_frame_register: Notify driver that a management frame type was |
| * registered. Note that this callback may not sleep, and cannot run |
| * concurrently with itself. |
| * |
| * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device. |
| * Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may |
| * reject TX/RX mask combinations they cannot support by returning -EINVAL |
| * (also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX). |
| * |
| * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant). |
| * |
| * @set_ringparam: Set tx and rx ring sizes. |
| * |
| * @get_ringparam: Get tx and rx ring current and maximum sizes. |
| * |
| * @tdls_mgmt: Transmit a TDLS management frame. |
| * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup). |
| */ |
| struct cfg80211_ops { |
| int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); |
| int (*resume)(struct wiphy *wiphy); |
| |
| struct net_device * (*add_virtual_intf)(struct wiphy *wiphy, |
| char *name, |
| enum nl80211_iftype type, |
| u32 *flags, |
| struct vif_params *params); |
| int (*del_virtual_intf)(struct wiphy *wiphy, struct net_device *dev); |
| int (*change_virtual_intf)(struct wiphy *wiphy, |
| struct net_device *dev, |
| enum nl80211_iftype type, u32 *flags, |
| struct vif_params *params); |
| |
| int (*add_key)(struct wiphy *wiphy, struct net_device *netdev, |
| u8 key_index, bool pairwise, const u8 *mac_addr, |
| struct key_params *params); |
| int (*get_key)(struct wiphy *wiphy, struct net_device *netdev, |
| u8 key_index, bool pairwise, const u8 *mac_addr, |
| void *cookie, |
| void (*callback)(void *cookie, struct key_params*)); |
| int (*del_key)(struct wiphy *wiphy, struct net_device *netdev, |
| u8 key_index, bool pairwise, const u8 *mac_addr); |
| int (*set_default_key)(struct wiphy *wiphy, |
| struct net_device *netdev, |
| u8 key_index, bool unicast, bool multicast); |
| int (*set_default_mgmt_key)(struct wiphy *wiphy, |
| struct net_device *netdev, |
| u8 key_index); |
| |
| int (*add_beacon)(struct wiphy *wiphy, struct net_device *dev, |
| struct beacon_parameters *info); |
| int (*set_beacon)(struct wiphy *wiphy, struct net_device *dev, |
| struct beacon_parameters *info); |
| int (*del_beacon)(struct wiphy *wiphy, struct net_device *dev); |
| |
| |
| int (*add_station)(struct wiphy *wiphy, struct net_device *dev, |
| u8 *mac, struct station_parameters *params); |
| int (*del_station)(struct wiphy *wiphy, struct net_device *dev, |
| u8 *mac); |
| int (*change_station)(struct wiphy *wiphy, struct net_device *dev, |
| u8 *mac, struct station_parameters *params); |
| int (*get_station)(struct wiphy *wiphy, struct net_device *dev, |
| u8 *mac, struct station_info *sinfo); |
| int (*dump_station)(struct wiphy *wiphy, struct net_device *dev, |
| int idx, u8 *mac, struct station_info *sinfo); |
| |
| int (*add_mpath)(struct wiphy *wiphy, struct net_device *dev, |
| u8 *dst, u8 *next_hop); |
| int (*del_mpath)(struct wiphy *wiphy, struct net_device *dev, |
| u8 *dst); |
| int (*change_mpath)(struct wiphy *wiphy, struct net_device *dev, |
| u8 *dst, u8 *next_hop); |
| int (*get_mpath)(struct wiphy *wiphy, struct net_device *dev, |
| u8 *dst, u8 *next_hop, |
| struct mpath_info *pinfo); |
| int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev, |
| int idx, u8 *dst, u8 *next_hop, |
| struct mpath_info *pinfo); |
| int (*get_mesh_config)(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct mesh_config *conf); |
| int (*update_mesh_config)(struct wiphy *wiphy, |
| struct net_device *dev, u32 mask, |
| const struct mesh_config *nconf); |
| int (*join_mesh)(struct wiphy *wiphy, struct net_device *dev, |
| const struct mesh_config *conf, |
| const struct mesh_setup *setup); |
| int (*leave_mesh)(struct wiphy *wiphy, struct net_device *dev); |
| |
| int (*change_bss)(struct wiphy *wiphy, struct net_device *dev, |
| struct bss_parameters *params); |
| |
| int (*set_txq_params)(struct wiphy *wiphy, struct net_device *dev, |
| struct ieee80211_txq_params *params); |
| |
| int (*set_channel)(struct wiphy *wiphy, struct net_device *dev, |
| struct ieee80211_channel *chan, |
| enum nl80211_channel_type channel_type); |
| |
| int (*scan)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_scan_request *request); |
| |
| int (*auth)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_auth_request *req); |
| int (*assoc)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_assoc_request *req); |
| int (*deauth)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_deauth_request *req, |
| void *cookie); |
| int (*disassoc)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_disassoc_request *req, |
| void *cookie); |
| |
| int (*connect)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_connect_params *sme); |
| int (*disconnect)(struct wiphy *wiphy, struct net_device *dev, |
| u16 reason_code); |
| |
| int (*join_ibss)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_ibss_params *params); |
| int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev); |
| |
| int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); |
| |
| int (*set_tx_power)(struct wiphy *wiphy, |
| enum nl80211_tx_power_setting type, int mbm); |
| int (*get_tx_power)(struct wiphy *wiphy, int *dbm); |
| |
| int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *addr); |
| |
| void (*rfkill_poll)(struct wiphy *wiphy); |
| |
| #ifdef CONFIG_NL80211_TESTMODE |
| int (*testmode_cmd)(struct wiphy *wiphy, void *data, int len); |
| int (*testmode_dump)(struct wiphy *wiphy, struct sk_buff *skb, |
| struct netlink_callback *cb, |
| void *data, int len); |
| #endif |
| |
| int (*set_bitrate_mask)(struct wiphy *wiphy, |
| struct net_device *dev, |
| const u8 *peer, |
| const struct cfg80211_bitrate_mask *mask); |
| |
| int (*dump_survey)(struct wiphy *wiphy, struct net_device *netdev, |
| int idx, struct survey_info *info); |
| |
| int (*set_pmksa)(struct wiphy *wiphy, struct net_device *netdev, |
| struct cfg80211_pmksa *pmksa); |
| int (*del_pmksa)(struct wiphy *wiphy, struct net_device *netdev, |
| struct cfg80211_pmksa *pmksa); |
| int (*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev); |
| |
| int (*remain_on_channel)(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct ieee80211_channel *chan, |
| enum nl80211_channel_type channel_type, |
| unsigned int duration, |
| u64 *cookie); |
| int (*cancel_remain_on_channel)(struct wiphy *wiphy, |
| struct net_device *dev, |
| u64 cookie); |
| |
| int (*mgmt_tx)(struct wiphy *wiphy, struct net_device *dev, |
| struct ieee80211_channel *chan, bool offchan, |
| enum nl80211_channel_type channel_type, |
| bool channel_type_valid, unsigned int wait, |
| const u8 *buf, size_t len, bool no_cck, |
| u64 *cookie); |
| int (*mgmt_tx_cancel_wait)(struct wiphy *wiphy, |
| struct net_device *dev, |
| u64 cookie); |
| |
| int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev, |
| bool enabled, int timeout); |
| |
| int (*set_cqm_rssi_config)(struct wiphy *wiphy, |
| struct net_device *dev, |
| s32 rssi_thold, u32 rssi_hyst); |
| |
| void (*mgmt_frame_register)(struct wiphy *wiphy, |
| struct net_device *dev, |
| u16 frame_type, bool reg); |
| |
| int (*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant); |
| int (*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant); |
| |
| int (*set_ringparam)(struct wiphy *wiphy, u32 tx, u32 rx); |
| void (*get_ringparam)(struct wiphy *wiphy, |
| u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max); |
| |
| int (*sched_scan_start)(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct cfg80211_sched_scan_request *request); |
| int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev); |
| |
| int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev, |
| struct cfg80211_gtk_rekey_data *data); |
| |
| int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev, |
| u8 *peer, u8 action_code, u8 dialog_token, |
| u16 status_code, const u8 *buf, size_t len); |
| int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev, |
| u8 *peer, enum nl80211_tdls_operation oper); |
| }; |
| |
| /* |
| * wireless hardware and networking interfaces structures |
| * and registration/helper functions |
| */ |
| |
| /** |
| * enum wiphy_flags - wiphy capability flags |
| * |
| * @WIPHY_FLAG_CUSTOM_REGULATORY: tells us the driver for this device |
| * has its own custom regulatory domain and cannot identify the |
| * ISO / IEC 3166 alpha2 it belongs to. When this is enabled |
| * we will disregard the first regulatory hint (when the |
| * initiator is %REGDOM_SET_BY_CORE). |
| * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will |
| * ignore regulatory domain settings until it gets its own regulatory |
| * domain via its regulatory_hint() unless the regulatory hint is |
| * from a country IE. After its gets its own regulatory domain it will |
| * only allow further regulatory domain settings to further enhance |
| * compliance. For example if channel 13 and 14 are disabled by this |
| * regulatory domain no user regulatory domain can enable these channels |
| * at a later time. This can be used for devices which do not have |
| * calibration information guaranteed for frequencies or settings |
| * outside of its regulatory domain. |
| * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure |
| * that passive scan flags and beaconing flags may not be lifted by |
| * cfg80211 due to regulatory beacon hints. For more information on beacon |
| * hints read the documenation for regulatory_hint_found_beacon() |
| * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this |
| * wiphy at all |
| * @WIPHY_FLAG_ENFORCE_COMBINATIONS: Set this flag to enforce interface |
| * combinations for this device. This flag is used for backward |
| * compatibility only until all drivers advertise combinations and |
| * they will always be enforced. |
| * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled |
| * by default -- this flag will be set depending on the kernel's default |
| * on wiphy_new(), but can be changed by the driver if it has a good |
| * reason to override the default |
| * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station |
| * on a VLAN interface) |
| * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station |
| * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the |
| * control port protocol ethertype. The device also honours the |
| * control_port_no_encrypt flag. |
| * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN. |
| * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing |
| * auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH. |
| * @WIPHY_FLAG_SUPPORTS_SCHED_SCAN: The device supports scheduled scans. |
| * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the |
| * firmware. |
| * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP. |
| * @WIPHY_FLAG_SUPPORTS_TDLS: The device supports TDLS (802.11z) operation. |
| * @WIPHY_FLAG_TDLS_EXTERNAL_SETUP: The device does not handle TDLS (802.11z) |
| * link setup/discovery operations internally. Setup, discovery and |
| * teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT |
| * command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be |
| * used for asking the driver/firmware to perform a TDLS operation. |
| */ |
| enum wiphy_flags { |
| WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), |
| WIPHY_FLAG_STRICT_REGULATORY = BIT(1), |
| WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2), |
| WIPHY_FLAG_NETNS_OK = BIT(3), |
| WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4), |
| WIPHY_FLAG_4ADDR_AP = BIT(5), |
| WIPHY_FLAG_4ADDR_STATION = BIT(6), |
| WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7), |
| WIPHY_FLAG_IBSS_RSN = BIT(8), |
| WIPHY_FLAG_MESH_AUTH = BIT(10), |
| WIPHY_FLAG_SUPPORTS_SCHED_SCAN = BIT(11), |
| WIPHY_FLAG_ENFORCE_COMBINATIONS = BIT(12), |
| WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13), |
| WIPHY_FLAG_AP_UAPSD = BIT(14), |
| WIPHY_FLAG_SUPPORTS_TDLS = BIT(15), |
| WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16), |
| }; |
| |
| /** |
| * struct ieee80211_iface_limit - limit on certain interface types |
| * @max: maximum number of interfaces of these types |
| * @types: interface types (bits) |
| */ |
| struct ieee80211_iface_limit { |
| u16 max; |
| u16 types; |
| }; |
| |
| /** |
| * struct ieee80211_iface_combination - possible interface combination |
| * @limits: limits for the given interface types |
| * @n_limits: number of limitations |
| * @num_different_channels: can use up to this many different channels |
| * @max_interfaces: maximum number of interfaces in total allowed in this |
| * group |
| * @beacon_int_infra_match: In this combination, the beacon intervals |
| * between infrastructure and AP types must match. This is required |
| * only in special cases. |
| * |
| * These examples can be expressed as follows: |
| * |
| * Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total: |
| * |
| * struct ieee80211_iface_limit limits1[] = { |
| * { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), }, |
| * { .max = 1, .types = BIT(NL80211_IFTYPE_AP}, }, |
| * }; |
| * struct ieee80211_iface_combination combination1 = { |
| * .limits = limits1, |
| * .n_limits = ARRAY_SIZE(limits1), |
| * .max_interfaces = 2, |
| * .beacon_int_infra_match = true, |
| * }; |
| * |
| * |
| * Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total: |
| * |
| * struct ieee80211_iface_limit limits2[] = { |
| * { .max = 8, .types = BIT(NL80211_IFTYPE_AP) | |
| * BIT(NL80211_IFTYPE_P2P_GO), }, |
| * }; |
| * struct ieee80211_iface_combination combination2 = { |
| * .limits = limits2, |
| * .n_limits = ARRAY_SIZE(limits2), |
| * .max_interfaces = 8, |
| * .num_different_channels = 1, |
| * }; |
| * |
| * |
| * Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total. |
| * This allows for an infrastructure connection and three P2P connections. |
| * |
| * struct ieee80211_iface_limit limits3[] = { |
| * { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), }, |
| * { .max = 3, .types = BIT(NL80211_IFTYPE_P2P_GO) | |
| * BIT(NL80211_IFTYPE_P2P_CLIENT), }, |
| * }; |
| * struct ieee80211_iface_combination combination3 = { |
| * .limits = limits3, |
| * .n_limits = ARRAY_SIZE(limits3), |
| * .max_interfaces = 4, |
| * .num_different_channels = 2, |
| * }; |
| */ |
| struct ieee80211_iface_combination { |
| const struct ieee80211_iface_limit *limits; |
| u32 num_different_channels; |
| u16 max_interfaces; |
| u8 n_limits; |
| bool beacon_int_infra_match; |
| }; |
| |
| struct mac_address { |
| u8 addr[ETH_ALEN]; |
| }; |
| |
| struct ieee80211_txrx_stypes { |
| u16 tx, rx; |
| }; |
| |
| /** |
| * enum wiphy_wowlan_support_flags - WoWLAN support flags |
| * @WIPHY_WOWLAN_ANY: supports wakeup for the special "any" |
| * trigger that keeps the device operating as-is and |
| * wakes up the host on any activity, for example a |
| * received packet that passed filtering; note that the |
| * packet should be preserved in that case |
| * @WIPHY_WOWLAN_MAGIC_PKT: supports wakeup on magic packet |
| * (see nl80211.h) |
| * @WIPHY_WOWLAN_DISCONNECT: supports wakeup on disconnect |
| * @WIPHY_WOWLAN_SUPPORTS_GTK_REKEY: supports GTK rekeying while asleep |
| * @WIPHY_WOWLAN_GTK_REKEY_FAILURE: supports wakeup on GTK rekey failure |
| * @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request |
| * @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure |
| * @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release |
| */ |
| enum wiphy_wowlan_support_flags { |
| WIPHY_WOWLAN_ANY = BIT(0), |
| WIPHY_WOWLAN_MAGIC_PKT = BIT(1), |
| WIPHY_WOWLAN_DISCONNECT = BIT(2), |
| WIPHY_WOWLAN_SUPPORTS_GTK_REKEY = BIT(3), |
| WIPHY_WOWLAN_GTK_REKEY_FAILURE = BIT(4), |
| WIPHY_WOWLAN_EAP_IDENTITY_REQ = BIT(5), |
| WIPHY_WOWLAN_4WAY_HANDSHAKE = BIT(6), |
| WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7), |
| }; |
| |
| /** |
| * struct wiphy_wowlan_support - WoWLAN support data |
| * @flags: see &enum wiphy_wowlan_support_flags |
| * @n_patterns: number of supported wakeup patterns |
| * (see nl80211.h for the pattern definition) |
| * @pattern_max_len: maximum length of each pattern |
| * @pattern_min_len: minimum length of each pattern |
| */ |
| struct wiphy_wowlan_support { |
| u32 flags; |
| int n_patterns; |
| int pattern_max_len; |
| int pattern_min_len; |
| }; |
| |
| /** |
| * struct wiphy - wireless hardware description |
| * @reg_notifier: the driver's regulatory notification callback, |
| * note that if your driver uses wiphy_apply_custom_regulatory() |
| * the reg_notifier's request can be passed as NULL |
| * @regd: the driver's regulatory domain, if one was requested via |
| * the regulatory_hint() API. This can be used by the driver |
| * on the reg_notifier() if it chooses to ignore future |
| * regulatory domain changes caused by other drivers. |
| * @signal_type: signal type reported in &struct cfg80211_bss. |
| * @cipher_suites: supported cipher suites |
| * @n_cipher_suites: number of supported cipher suites |
| * @retry_short: Retry limit for short frames (dot11ShortRetryLimit) |
| * @retry_long: Retry limit for long frames (dot11LongRetryLimit) |
| * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold); |
| * -1 = fragmentation disabled, only odd values >= 256 used |
| * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled |
| * @_net: the network namespace this wiphy currently lives in |
| * @perm_addr: permanent MAC address of this device |
| * @addr_mask: If the device supports multiple MAC addresses by masking, |
| * set this to a mask with variable bits set to 1, e.g. if the last |
| * four bits are variable then set it to 00:...:00:0f. The actual |
| * variable bits shall be determined by the interfaces added, with |
| * interfaces not matching the mask being rejected to be brought up. |
| * @n_addresses: number of addresses in @addresses. |
| * @addresses: If the device has more than one address, set this pointer |
| * to a list of addresses (6 bytes each). The first one will be used |
| * by default for perm_addr. In this case, the mask should be set to |
| * all-zeroes. In this case it is assumed that the device can handle |
| * the same number of arbitrary MAC addresses. |
| * @registered: protects ->resume and ->suspend sysfs callbacks against |
| * unregister hardware |
| * @debugfsdir: debugfs directory used for this wiphy, will be renamed |
| * automatically on wiphy renames |
| * @dev: (virtual) struct device for this wiphy |
| * @registered: helps synchronize suspend/resume with wiphy unregister |
| * @wext: wireless extension handlers |
| * @priv: driver private data (sized according to wiphy_new() parameter) |
| * @interface_modes: bitmask of interfaces types valid for this wiphy, |
| * must be set by driver |
| * @iface_combinations: Valid interface combinations array, should not |
| * list single interface types. |
| * @n_iface_combinations: number of entries in @iface_combinations array. |
| * @software_iftypes: bitmask of software interface types, these are not |
| * subject to any restrictions since they are purely managed in SW. |
| * @flags: wiphy flags, see &enum wiphy_flags |
| * @bss_priv_size: each BSS struct has private data allocated with it, |
| * this variable determines its size |
| * @max_scan_ssids: maximum number of SSIDs the device can scan for in |
| * any given scan |
| * @max_sched_scan_ssids: maximum number of SSIDs the device can scan |
| * for in any given scheduled scan |
| * @max_match_sets: maximum number of match sets the device can handle |
| * when performing a scheduled scan, 0 if filtering is not |
| * supported. |
| * @max_scan_ie_len: maximum length of user-controlled IEs device can |
| * add to probe request frames transmitted during a scan, must not |
| * include fixed IEs like supported rates |
| * @max_sched_scan_ie_len: same as max_scan_ie_len, but for scheduled |
| * scans |
| * @coverage_class: current coverage class |
| * @fw_version: firmware version for ethtool reporting |
| * @hw_version: hardware version for ethtool reporting |
| * @max_num_pmkids: maximum number of PMKIDs supported by device |
| * @privid: a pointer that drivers can use to identify if an arbitrary |
| * wiphy is theirs, e.g. in global notifiers |
| * @bands: information about bands/channels supported by this device |
| * |
| * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or |
| * transmitted through nl80211, points to an array indexed by interface |
| * type |
| * |
| * @available_antennas_tx: bitmap of antennas which are available to be |
| * configured as TX antennas. Antenna configuration commands will be |
| * rejected unless this or @available_antennas_rx is set. |
| * |
| * @available_antennas_rx: bitmap of antennas which are available to be |
| * configured as RX antennas. Antenna configuration commands will be |
| * rejected unless this or @available_antennas_tx is set. |
| * |
| * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation |
| * may request, if implemented. |
| * |
| * @wowlan: WoWLAN support information |
| */ |
| struct wiphy { |
| /* assign these fields before you register the wiphy */ |
| |
| /* permanent MAC address(es) */ |
| u8 perm_addr[ETH_ALEN]; |
| u8 addr_mask[ETH_ALEN]; |
| |
| struct mac_address *addresses; |
| |
| const struct ieee80211_txrx_stypes *mgmt_stypes; |
| |
| const struct ieee80211_iface_combination *iface_combinations; |
| int n_iface_combinations; |
| u16 software_iftypes; |
| |
| u16 n_addresses; |
| |
| /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ |
| u16 interface_modes; |
| |
| u32 flags; |
| |
| enum cfg80211_signal_type signal_type; |
| |
| int bss_priv_size; |
| u8 max_scan_ssids; |
| u8 max_sched_scan_ssids; |
| u8 max_match_sets; |
| u16 max_scan_ie_len; |
| u16 max_sched_scan_ie_len; |
| |
| int n_cipher_suites; |
| const u32 *cipher_suites; |
| |
| u8 retry_short; |
| u8 retry_long; |
| u32 frag_threshold; |
| u32 rts_threshold; |
| u8 coverage_class; |
| |
| char fw_version[ETHTOOL_BUSINFO_LEN]; |
| u32 hw_version; |
| |
| struct wiphy_wowlan_support wowlan; |
| |
| u16 max_remain_on_channel_duration; |
| |
| u8 max_num_pmkids; |
| |
| u32 available_antennas_tx; |
| u32 available_antennas_rx; |
| |
| /* If multiple wiphys are registered and you're handed e.g. |
| * a regular netdev with assigned ieee80211_ptr, you won't |
| * know whether it points to a wiphy your driver has registered |
| * or not. Assign this to something global to your driver to |
| * help determine whether you own this wiphy or not. */ |
| const void *privid; |
| |
| struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; |
| |
| /* Lets us get back the wiphy on the callback */ |
| int (*reg_notifier)(struct wiphy *wiphy, |
| struct regulatory_request *request); |
| |
| /* fields below are read-only, assigned by cfg80211 */ |
| |
| const struct ieee80211_regdomain *regd; |
| |
| /* the item in /sys/class/ieee80211/ points to this, |
| * you need use set_wiphy_dev() (see below) */ |
| struct device dev; |
| |
| /* protects ->resume, ->suspend sysfs callbacks against unregister hw */ |
| bool registered; |
| |
| /* dir in debugfs: ieee80211/<wiphyname> */ |
| struct dentry *debugfsdir; |
| |
| #ifdef CONFIG_NET_NS |
| /* the network namespace this phy lives in currently */ |
| struct net *_net; |
| #endif |
| |
| #ifdef CONFIG_CFG80211_WEXT |
| const struct iw_handler_def *wext; |
| #endif |
| |
| char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); |
| }; |
| |
| static inline struct net *wiphy_net(struct wiphy *wiphy) |
| { |
| return read_pnet(&wiphy->_net); |
| } |
| |
| static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net) |
| { |
| write_pnet(&wiphy->_net, net); |
| } |
| |
| /** |
| * wiphy_priv - return priv from wiphy |
| * |
| * @wiphy: the wiphy whose priv pointer to return |
| */ |
| static inline void *wiphy_priv(struct wiphy *wiphy) |
| { |
| BUG_ON(!wiphy); |
| return &wiphy->priv; |
| } |
| |
| /** |
| * priv_to_wiphy - return the wiphy containing the priv |
| * |
| * @priv: a pointer previously returned by wiphy_priv |
| */ |
| static inline struct wiphy *priv_to_wiphy(void *priv) |
| { |
| BUG_ON(!priv); |
| return container_of(priv, struct wiphy, priv); |
| } |
| |
| /** |
| * set_wiphy_dev - set device pointer for wiphy |
| * |
| * @wiphy: The wiphy whose device to bind |
| * @dev: The device to parent it to |
| */ |
| static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) |
| { |
| wiphy->dev.parent = dev; |
| } |
| |
| /** |
| * wiphy_dev - get wiphy dev pointer |
| * |
| * @wiphy: The wiphy whose device struct to look up |
| */ |
| static inline struct device *wiphy_dev(struct wiphy *wiphy) |
| { |
| return wiphy->dev.parent; |
| } |
| |
| /** |
| * wiphy_name - get wiphy name |
| * |
| * @wiphy: The wiphy whose name to return |
| */ |
| static inline const char *wiphy_name(const struct wiphy *wiphy) |
| { |
| return dev_name(&wiphy->dev); |
| } |
| |
| /** |
| * wiphy_new - create a new wiphy for use with cfg80211 |
| * |
| * @ops: The configuration operations for this device |
| * @sizeof_priv: The size of the private area to allocate |
| * |
| * Create a new wiphy and associate the given operations with it. |
| * @sizeof_priv bytes are allocated for private use. |
| * |
| * The returned pointer must be assigned to each netdev's |
| * ieee80211_ptr for proper operation. |
| */ |
| struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); |
| |
| /** |
| * wiphy_register - register a wiphy with cfg80211 |
| * |
| * @wiphy: The wiphy to register. |
| * |
| * Returns a non-negative wiphy index or a negative error code. |
| */ |
| extern int wiphy_register(struct wiphy *wiphy); |
| |
| /** |
| * wiphy_unregister - deregister a wiphy from cfg80211 |
| * |
| * @wiphy: The wiphy to unregister. |
| * |
| * After this call, no more requests can be made with this priv |
| * pointer, but the call may sleep to wait for an outstanding |
| * request that is being handled. |
| */ |
| extern void wiphy_unregister(struct wiphy *wiphy); |
| |
| /** |
| * wiphy_free - free wiphy |
| * |
| * @wiphy: The wiphy to free |
| */ |
| extern void wiphy_free(struct wiphy *wiphy); |
| |
| /* internal structs */ |
| struct cfg80211_conn; |
| struct cfg80211_internal_bss; |
| struct cfg80211_cached_keys; |
| |
| #define MAX_AUTH_BSSES 4 |
| |
| /** |
| * struct wireless_dev - wireless per-netdev state |
| * |
| * This structure must be allocated by the driver/stack |
| * that uses the ieee80211_ptr field in struct net_device |
| * (this is intentional so it can be allocated along with |
| * the netdev.) |
| * |
| * @wiphy: pointer to hardware description |
| * @iftype: interface type |
| * @list: (private) Used to collect the interfaces |
| * @netdev: (private) Used to reference back to the netdev |
| * @current_bss: (private) Used by the internal configuration code |
| * @channel: (private) Used by the internal configuration code to track |
| * user-set AP, monitor and WDS channels for wireless extensions |
| * @bssid: (private) Used by the internal configuration code |
| * @ssid: (private) Used by the internal configuration code |
| * @ssid_len: (private) Used by the internal configuration code |
| * @mesh_id_len: (private) Used by the internal configuration code |
| * @mesh_id_up_len: (private) Used by the internal configuration code |
| * @wext: (private) Used by the internal wireless extensions compat code |
| * @use_4addr: indicates 4addr mode is used on this interface, must be |
| * set by driver (if supported) on add_interface BEFORE registering the |
| * netdev and may otherwise be used by driver read-only, will be update |
| * by cfg80211 on change_interface |
| * @mgmt_registrations: list of registrations for management frames |
| * @mgmt_registrations_lock: lock for the list |
| * @mtx: mutex used to lock data in this struct |
| * @cleanup_work: work struct used for cleanup that can't be done directly |
| * @beacon_interval: beacon interval used on this device for transmitting |
| * beacons, 0 when not valid |
| */ |
| struct wireless_dev { |
| struct wiphy *wiphy; |
| enum nl80211_iftype iftype; |
| |
| /* the remainder of this struct should be private to cfg80211 */ |
| struct list_head list; |
| struct net_device *netdev; |
| |
| struct list_head mgmt_registrations; |
| spinlock_t mgmt_registrations_lock; |
| |
| struct mutex mtx; |
| |
| struct work_struct cleanup_work; |
| |
| bool use_4addr; |
| |
| /* currently used for IBSS and SME - might be rearranged later */ |
| u8 ssid[IEEE80211_MAX_SSID_LEN]; |
| u8 ssid_len, mesh_id_len, mesh_id_up_len; |
| enum { |
| CFG80211_SME_IDLE, |
| CFG80211_SME_CONNECTING, |
| CFG80211_SME_CONNECTED, |
| } sme_state; |
| struct cfg80211_conn *conn; |
| struct cfg80211_cached_keys *connect_keys; |
| |
| struct list_head event_list; |
| spinlock_t event_lock; |
| |
| struct cfg80211_internal_bss *authtry_bsses[MAX_AUTH_BSSES]; |
| struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES]; |
| struct cfg80211_internal_bss *current_bss; /* associated / joined */ |
| struct ieee80211_channel *channel; |
| |
| bool ps; |
| int ps_timeout; |
| |
| int beacon_interval; |
| |
| #ifdef CONFIG_CFG80211_WEXT |
| /* wext data */ |
| struct { |
| struct cfg80211_ibss_params ibss; |
| struct cfg80211_connect_params connect; |
| struct cfg80211_cached_keys *keys; |
| u8 *ie; |
| size_t ie_len; |
| u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN]; |
| u8 ssid[IEEE80211_MAX_SSID_LEN]; |
| s8 default_key, default_mgmt_key; |
| bool prev_bssid_valid; |
| } wext; |
| #endif |
| }; |
| |
| /** |
| * wdev_priv - return wiphy priv from wireless_dev |
| * |
| * @wdev: The wireless device whose wiphy's priv pointer to return |
| */ |
| static inline void *wdev_priv(struct wireless_dev *wdev) |
| { |
| BUG_ON(!wdev); |
| return wiphy_priv(wdev->wiphy); |
| } |
| |
| /** |
| * DOC: Utility functions |
| * |
| * cfg80211 offers a number of utility functions that can be useful. |
| */ |
| |
| /** |
| * ieee80211_channel_to_frequency - convert channel number to frequency |
| * @chan: channel number |
| * @band: band, necessary due to channel number overlap |
| */ |
| extern int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band); |
| |
| /** |
| * ieee80211_frequency_to_channel - convert frequency to channel number |
| * @freq: center frequency |
| */ |
| extern int ieee80211_frequency_to_channel(int freq); |
| |
| /* |
| * Name indirection necessary because the ieee80211 code also has |
| * a function named "ieee80211_get_channel", so if you include |
| * cfg80211's header file you get cfg80211's version, if you try |
| * to include both header files you'll (rightfully!) get a symbol |
| * clash. |
| */ |
| extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, |
| int freq); |
| /** |
| * ieee80211_get_channel - get channel struct from wiphy for specified frequency |
| * @wiphy: the struct wiphy to get the channel for |
| * @freq: the center frequency of the channel |
| */ |
| static inline struct ieee80211_channel * |
| ieee80211_get_channel(struct wiphy *wiphy, int freq) |
| { |
| return __ieee80211_get_channel(wiphy, freq); |
| } |
| |
| /** |
| * ieee80211_get_response_rate - get basic rate for a given rate |
| * |
| * @sband: the band to look for rates in |
| * @basic_rates: bitmap of basic rates |
| * @bitrate: the bitrate for which to find the basic rate |
| * |
| * This function returns the basic rate corresponding to a given |
| * bitrate, that is the next lower bitrate contained in the basic |
| * rate map, which is, for this function, given as a bitmap of |
| * indices of rates in the band's bitrate table. |
| */ |
| struct ieee80211_rate * |
| ieee80211_get_response_rate(struct ieee80211_supported_band *sband, |
| u32 basic_rates, int bitrate); |
| |
| /* |
| * Radiotap parsing functions -- for controlled injection support |
| * |
| * Implemented in net/wireless/radiotap.c |
| * Documentation in Documentation/networking/radiotap-headers.txt |
| */ |
| |
| struct radiotap_align_size { |
| uint8_t align:4, size:4; |
| }; |
| |
| struct ieee80211_radiotap_namespace { |
| const struct radiotap_align_size *align_size; |
| int n_bits; |
| uint32_t oui; |
| uint8_t subns; |
| }; |
| |
| struct ieee80211_radiotap_vendor_namespaces { |
| const struct ieee80211_radiotap_namespace *ns; |
| int n_ns; |
| }; |
| |
| /** |
| * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args |
| * @this_arg_index: index of current arg, valid after each successful call |
| * to ieee80211_radiotap_iterator_next() |
| * @this_arg: pointer to current radiotap arg; it is valid after each |
| * call to ieee80211_radiotap_iterator_next() but also after |
| * ieee80211_radiotap_iterator_init() where it will point to |
| * the beginning of the actual data portion |
| * @this_arg_size: length of the current arg, for convenience |
| * @current_namespace: pointer to the current namespace definition |
| * (or internally %NULL if the current namespace is unknown) |
| * @is_radiotap_ns: indicates whether the current namespace is the default |
| * radiotap namespace or not |
| * |
| * @_rtheader: pointer to the radiotap header we are walking through |
| * @_max_length: length of radiotap header in cpu byte ordering |
| * @_arg_index: next argument index |
| * @_arg: next argument pointer |
| * @_next_bitmap: internal pointer to next present u32 |
| * @_bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present |
| * @_vns: vendor namespace definitions |
| * @_next_ns_data: beginning of the next namespace's data |
| * @_reset_on_ext: internal; reset the arg index to 0 when going to the |
| * next bitmap word |
| * |
| * Describes the radiotap parser state. Fields prefixed with an underscore |
| * must not be used by users of the parser, only by the parser internally. |
| */ |
| |
| struct ieee80211_radiotap_iterator { |
| struct ieee80211_radiotap_header *_rtheader; |
| const struct ieee80211_radiotap_vendor_namespaces *_vns; |
| const struct ieee80211_radiotap_namespace *current_namespace; |
| |
| unsigned char *_arg, *_next_ns_data; |
| __le32 *_next_bitmap; |
| |
| unsigned char *this_arg; |
| int this_arg_index; |
| int this_arg_size; |
| |
| int is_radiotap_ns; |
| |
| int _max_length; |
| int _arg_index; |
| uint32_t _bitmap_shifter; |
| int _reset_on_ext; |
| }; |
| |
| extern int ieee80211_radiotap_iterator_init( |
| struct ieee80211_radiotap_iterator *iterator, |
| struct ieee80211_radiotap_header *radiotap_header, |
| int max_length, const struct ieee80211_radiotap_vendor_namespaces *vns); |
| |
| extern int ieee80211_radiotap_iterator_next( |
| struct ieee80211_radiotap_iterator *iterator); |
| |
| |
| extern const unsigned char rfc1042_header[6]; |
| extern const unsigned char bridge_tunnel_header[6]; |
| |
| /* Parsed Information Elements */ |
| struct ieee802_11_elems { |
| u8 *ie_start; |
| size_t total_len; |
| |
| /* pointers to IEs */ |
| u8 *ssid; |
| u8 *supp_rates; |
| u8 *fh_params; |
| u8 *ds_params; |
| u8 *cf_params; |
| struct ieee80211_tim_ie *tim; |
| u8 *ibss_params; |
| u8 *challenge; |
| u8 *wpa; |
| u8 *rsn; |
| u8 *erp_info; |
| u8 *ext_supp_rates; |
| u8 *wmm_info; |
| u8 *wmm_param; |
| struct ieee80211_ht_cap *ht_cap_elem; |
| struct ieee80211_ht_info *ht_info_elem; |
| struct ieee80211_meshconf_ie *mesh_config; |
| u8 *mesh_id; |
| u8 *peering; |
| u8 *preq; |
| u8 *prep; |
| u8 *perr; |
| struct ieee80211_rann_ie *rann; |
| u8 *ch_switch_elem; |
| u8 *country_elem; |
| u8 *pwr_constr_elem; |
| u8 *quiet_elem; /* first quite element */ |
| u8 *timeout_int; |
| |
| /* length of them, respectively */ |
| u8 ssid_len; |
| u8 supp_rates_len; |
| u8 fh_params_len; |
| u8 ds_params_len; |
| u8 cf_params_len; |
| u8 tim_len; |
| u8 ibss_params_len; |
| u8 challenge_len; |
| u8 wpa_len; |
| u8 rsn_len; |
| u8 erp_info_len; |
| u8 ext_supp_rates_len; |
| u8 wmm_info_len; |
| u8 wmm_param_len; |
| u8 mesh_id_len; |
| u8 peering_len; |
| u8 preq_len; |
| u8 prep_len; |
| u8 perr_len; |
| u8 ch_switch_elem_len; |
| u8 country_elem_len; |
| u8 pwr_constr_elem_len; |
| u8 quiet_elem_len; |
| u8 num_of_quiet_elem; /* can be more the one */ |
| u8 timeout_int_len; |
| }; |
| |
| /** |
| * ieee80211_get_hdrlen_from_skb - get header length from data |
| * |
| * Given an skb with a raw 802.11 header at the data pointer this function |
| * returns the 802.11 header length in bytes (not including encryption |
| * headers). If the data in the sk_buff is too short to contain a valid 802.11 |
| * header the function returns 0. |
| * |
| * @skb: the frame |
| */ |
| unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); |
| |
| /** |
| * ieee80211_hdrlen - get header length in bytes from frame control |
| * @fc: frame control field in little-endian format |
| */ |
| unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc); |
| |
| /** |
| * DOC: Data path helpers |
| * |
| * In addition to generic utilities, cfg80211 also offers |
| * functions that help implement the data path for devices |
| * that do not do the 802.11/802.3 conversion on the device. |
| */ |
| |
| /** |
| * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3 |
| * @skb: the 802.11 data frame |
| * @addr: the device MAC address |
| * @iftype: the virtual interface type |
| */ |
| int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, |
| enum nl80211_iftype iftype); |
| |
| /** |
| * ieee80211_data_from_8023 - convert an 802.3 frame to 802.11 |
| * @skb: the 802.3 frame |
| * @addr: the device MAC address |
| * @iftype: the virtual interface type |
| * @bssid: the network bssid (used only for iftype STATION and ADHOC) |
| * @qos: build 802.11 QoS data frame |
| */ |
| int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr, |
| enum nl80211_iftype iftype, u8 *bssid, bool qos); |
| |
| /** |
| * ieee80211_amsdu_to_8023s - decode an IEEE 802.11n A-MSDU frame |
| * |
| * Decode an IEEE 802.11n A-MSDU frame and convert it to a list of |
| * 802.3 frames. The @list will be empty if the decode fails. The |
| * @skb is consumed after the function returns. |
| * |
| * @skb: The input IEEE 802.11n A-MSDU frame. |
| * @list: The output list of 802.3 frames. It must be allocated and |
| * initialized by by the caller. |
| * @addr: The device MAC address. |
| * @iftype: The device interface type. |
| * @extra_headroom: The hardware extra headroom for SKBs in the @list. |
| * @has_80211_header: Set it true if SKB is with IEEE 802.11 header. |
| */ |
| void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, |
| const u8 *addr, enum nl80211_iftype iftype, |
| const unsigned int extra_headroom, |
| bool has_80211_header); |
| |
| /** |
| * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame |
| * @skb: the data frame |
| */ |
| unsigned int cfg80211_classify8021d(struct sk_buff *skb); |
| |
| /** |
| * cfg80211_find_ie - find information element in data |
| * |
| * @eid: element ID |
| * @ies: data consisting of IEs |
| * @len: length of data |
| * |
| * This function will return %NULL if the element ID could |
| * not be found or if the element is invalid (claims to be |
| * longer than the given data), or a pointer to the first byte |
| * of the requested element, that is the byte containing the |
| * element ID. There are no checks on the element length |
| * other than having to fit into the given data. |
| */ |
| const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); |
| |
| /** |
| * cfg80211_find_vendor_ie - find vendor specific information element in data |
| * |
| * @oui: vendor OUI |
| * @oui_type: vendor-specific OUI type |
| * @ies: data consisting of IEs |
| * @len: length of data |
| * |
| * This function will return %NULL if the vendor specific element ID |
| * could not be found or if the element is invalid (claims to be |
| * longer than the given data), or a pointer to the first byte |
| * of the requested element, that is the byte containing the |
| * element ID. There are no checks on the element length |
| * other than having to fit into the given data. |
| */ |
| const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, |
| const u8 *ies, int len); |
| |
| /** |
| * DOC: Regulatory enforcement infrastructure |
| * |
| * TODO |
| */ |
| |
| /** |
| * regulatory_hint - driver hint to the wireless core a regulatory domain |
| * @wiphy: the wireless device giving the hint (used only for reporting |
| * conflicts) |
| * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain |
| * should be in. If @rd is set this should be NULL. Note that if you |
| * set this to NULL you should still set rd->alpha2 to some accepted |
| * alpha2. |
| * |
| * Wireless drivers can use this function to hint to the wireless core |
| * what it believes should be the current regulatory domain by |
| * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory |
| * domain should be in or by providing a completely build regulatory domain. |
| * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried |
| * for a regulatory domain structure for the respective country. |
| * |
| * The wiphy must have been registered to cfg80211 prior to this call. |
| * For cfg80211 drivers this means you must first use wiphy_register(), |
| * for mac80211 drivers you must first use ieee80211_register_hw(). |
| * |
| * Drivers should check the return value, its possible you can get |
| * an -ENOMEM. |
| */ |
| extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2); |
| |
| /** |
| * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain |
| * @wiphy: the wireless device we want to process the regulatory domain on |
| * @regd: the custom regulatory domain to use for this wiphy |
| * |
| * Drivers can sometimes have custom regulatory domains which do not apply |
| * to a specific country. Drivers can use this to apply such custom regulatory |
| * domains. This routine must be called prior to wiphy registration. The |
| * custom regulatory domain will be trusted completely and as such previous |
| * default channel settings will be disregarded. If no rule is found for a |
| * channel on the regulatory domain the channel will be disabled. |
| */ |
| extern void wiphy_apply_custom_regulatory( |
| struct wiphy *wiphy, |
| const struct ieee80211_regdomain *regd); |
| |
| /** |
| * freq_reg_info - get regulatory information for the given frequency |
| * @wiphy: the wiphy for which we want to process this rule for |
| * @center_freq: Frequency in KHz for which we want regulatory information for |
| * @desired_bw_khz: the desired max bandwidth you want to use per |
| * channel. Note that this is still 20 MHz if you want to use HT40 |
| * as HT40 makes use of two channels for its 40 MHz width bandwidth. |
| * If set to 0 we'll assume you want the standard 20 MHz. |
| * @reg_rule: the regulatory rule which we have for this frequency |
| * |
| * Use this function to get the regulatory rule for a specific frequency on |
| * a given wireless device. If the device has a specific regulatory domain |
| * it wants to follow we respect that unless a country IE has been received |
| * and processed already. |
| * |
| * Returns 0 if it was able to find a valid regulatory rule which does |
| * apply to the given center_freq otherwise it returns non-zero. It will |
| * also return -ERANGE if we determine the given center_freq does not even have |
| * a regulatory rule for a frequency range in the center_freq's band. See |
| * freq_in_rule_band() for our current definition of a band -- this is purely |
| * subjective and right now its 802.11 specific. |
| */ |
| extern int freq_reg_info(struct wiphy *wiphy, |
| u32 center_freq, |
| u32 desired_bw_khz, |
| const struct ieee80211_reg_rule **reg_rule); |
| |
| /* |
| * callbacks for asynchronous cfg80211 methods, notification |
| * functions and BSS handling helpers |
| */ |
| |
| /** |
| * cfg80211_scan_done - notify that scan finished |
| * |
| * @request: the corresponding scan request |
| * @aborted: set to true if the scan was aborted for any reason, |
| * userspace will be notified of that |
| */ |
| void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted); |
| |
| /** |
| * cfg80211_sched_scan_results - notify that new scan results are available |
| * |
| * @wiphy: the wiphy which got scheduled scan results |
| */ |
| void cfg80211_sched_scan_results(struct wiphy *wiphy); |
| |
| /** |
| * cfg80211_sched_scan_stopped - notify that the scheduled scan has stopped |
| * |
| * @wiphy: the wiphy on which the scheduled scan stopped |
| * |
| * The driver can call this function to inform cfg80211 that the |
| * scheduled scan had to be stopped, for whatever reason. The driver |
| * is then called back via the sched_scan_stop operation when done. |
| */ |
| void cfg80211_sched_scan_stopped(struct wiphy *wiphy); |
| |
| /** |
| * cfg80211_inform_bss_frame - inform cfg80211 of a received BSS frame |
| * |
| * @wiphy: the wiphy reporting the BSS |
| * @channel: The channel the frame was received on |
| * @mgmt: the management frame (probe response or beacon) |
| * @len: length of the management frame |
| * @signal: the signal strength, type depends on the wiphy's signal_type |
| * @gfp: context flags |
| * |
| * This informs cfg80211 that BSS information was found and |
| * the BSS should be updated/added. |
| */ |
| struct cfg80211_bss* |
| cfg80211_inform_bss_frame(struct wiphy *wiphy, |
| struct ieee80211_channel *channel, |
| struct ieee80211_mgmt *mgmt, size_t len, |
| s32 signal, gfp_t gfp); |
| |
| /** |
| * cfg80211_inform_bss - inform cfg80211 of a new BSS |
| * |
| * @wiphy: the wiphy reporting the BSS |
| * @channel: The channel the frame was received on |
| * @bssid: the BSSID of the BSS |
| * @timestamp: the TSF timestamp sent by the peer |
| * @capability: the capability field sent by the peer |
| * @beacon_interval: the beacon interval announced by the peer |
| * @ie: additional IEs sent by the peer |
| * @ielen: length of the additional IEs |
| * @signal: the signal strength, type depends on the wiphy's signal_type |
| * @gfp: context flags |
| * |
| * This informs cfg80211 that BSS information was found and |
| * the BSS should be updated/added. |
| */ |
| struct cfg80211_bss* |
| cfg80211_inform_bss(struct wiphy *wiphy, |
| struct ieee80211_channel *channel, |
| const u8 *bssid, |
| u64 timestamp, u16 capability, u16 beacon_interval, |
| const u8 *ie, size_t ielen, |
| s32 signal, gfp_t gfp); |
| |
| struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, |
| struct ieee80211_channel *channel, |
| const u8 *bssid, |
| const u8 *ssid, size_t ssid_len, |
| u16 capa_mask, u16 capa_val); |
| static inline struct cfg80211_bss * |
| cfg80211_get_ibss(struct wiphy *wiphy, |
| struct ieee80211_channel *channel, |
| const u8 *ssid, size_t ssid_len) |
| { |
| return cfg80211_get_bss(wiphy, channel, NULL, ssid, ssid_len, |
| WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS); |
| } |
| |
| struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy, |
| struct ieee80211_channel *channel, |
| const u8 *meshid, size_t meshidlen, |
| const u8 *meshcfg); |
| void cfg80211_put_bss(struct cfg80211_bss *bss); |
| |
| /** |
| * cfg80211_unlink_bss - unlink BSS from internal data structures |
| * @wiphy: the wiphy |
| * @bss: the bss to remove |
| * |
| * This function removes the given BSS from the internal data structures |
| * thereby making it no longer show up in scan results etc. Use this |
| * function when you detect a BSS is gone. Normally BSSes will also time |
| * out, so it is not necessary to use this function at all. |
| */ |
| void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); |
| |
| /** |
| * cfg80211_send_rx_auth - notification of processed authentication |
| * @dev: network device |
| * @buf: authentication frame (header + body) |
| * @len: length of the frame data |
| * |
| * This function is called whenever an authentication has been processed in |
| * station mode. The driver is required to call either this function or |
| * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth() |
| * call. This function may sleep. |
| */ |
| void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len); |
| |
| /** |
| * cfg80211_send_auth_timeout - notification of timed out authentication |
| * @dev: network device |
| * @addr: The MAC address of the device with which the authentication timed out |
| * |
| * This function may sleep. |
| */ |
| void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr); |
| |
| /** |
| * __cfg80211_auth_canceled - notify cfg80211 that authentication was canceled |
| * @dev: network device |
| * @addr: The MAC address of the device with which the authentication timed out |
| * |
| * When a pending authentication had no action yet, the driver may decide |
| * to not send a deauth frame, but in that case must calls this function |
| * to tell cfg80211 about this decision. It is only valid to call this |
| * function within the deauth() callback. |
| */ |
| void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr); |
| |
| /** |
| * cfg80211_send_rx_assoc - notification of processed association |
| * @dev: network device |
| * @buf: (re)association response frame (header + body) |
| * @len: length of the frame data |
| * |
| * This function is called whenever a (re)association response has been |
| * processed in station mode. The driver is required to call either this |
| * function or cfg80211_send_assoc_timeout() to indicate the result of |
| * cfg80211_ops::assoc() call. This function may sleep. |
| */ |
| void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len); |
| |
| /** |
| * cfg80211_send_assoc_timeout - notification of timed out association |
| * @dev: network device |
| * @addr: The MAC address of the device with which the association timed out |
| * |
| * This function may sleep. |
| */ |
| void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr); |
| |
| /** |
| * cfg80211_send_deauth - notification of processed deauthentication |
| * @dev: network device |
| * @buf: deauthentication frame (header + body) |
| * @len: length of the frame data |
| * |
| * This function is called whenever deauthentication has been processed in |
| * station mode. This includes both received deauthentication frames and |
| * locally generated ones. This function may sleep. |
| */ |
| void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len); |
| |
| /** |
| * __cfg80211_send_deauth - notification of processed deauthentication |
| * @dev: network device |
| * @buf: deauthentication frame (header + body) |
| * @len: length of the frame data |
| * |
| * Like cfg80211_send_deauth(), but doesn't take the wdev lock. |
| */ |
| void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len); |
| |
| /** |
| * cfg80211_send_disassoc - notification of processed disassociation |
| * @dev: network device |
| * @buf: disassociation response frame (header + body) |
| * @len: length of the frame data |
| * |
| * This function is called whenever disassociation has been processed in |
| * station mode. This includes both received disassociation frames and locally |
| * generated ones. This function may sleep. |
| */ |
| void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len); |
| |
| /** |
| * __cfg80211_send_disassoc - notification of processed disassociation |
| * @dev: network device |
| * @buf: disassociation response frame (header + body) |
| * @len: length of the frame data |
| * |
| * Like cfg80211_send_disassoc(), but doesn't take the wdev lock. |
| */ |
| void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, |
| size_t len); |
| |
| /** |
| * cfg80211_send_unprot_deauth - notification of unprotected deauthentication |
| * @dev: network device |
| * @buf: deauthentication frame (header + body) |
| * @len: length of the frame data |
| * |
| * This function is called whenever a received Deauthentication frame has been |
| * dropped in station mode because of MFP being used but the Deauthentication |
| * frame was not protected. This function may sleep. |
| */ |
| void cfg80211_send_unprot_deauth(struct net_device *dev, const u8 *buf, |
| size_t len); |
| |
| /** |
| * cfg80211_send_unprot_disassoc - notification of unprotected disassociation |
| * @dev: network device |
| * @buf: disassociation frame (header + body) |
| * @len: length of the frame data |
| * |
| * This function is called whenever a received Disassociation frame has been |
| * dropped in station mode because of MFP being used but the Disassociation |
| * frame was not protected. This function may sleep. |
| */ |
| void cfg80211_send_unprot_disassoc(struct net_device *dev, const u8 *buf, |
| size_t len); |
| |
| /** |
| * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP) |
| * @dev: network device |
| * @addr: The source MAC address of the frame |
| * @key_type: The key type that the received frame used |
| * @key_id: Key identifier (0..3). Can be -1 if missing. |
| * @tsc: The TSC value of the frame that generated the MIC failure (6 octets) |
| * @gfp: allocation flags |
| * |
| * This function is called whenever the local MAC detects a MIC failure in a |
| * received frame. This matches with MLME-MICHAELMICFAILURE.indication() |
| * primitive. |
| */ |
| void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr, |
| enum nl80211_key_type key_type, int key_id, |
| const u8 *tsc, gfp_t gfp); |
| |
| /** |
| * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS |
| * |
| * @dev: network device |
| * @bssid: the BSSID of the IBSS joined |
| * @gfp: allocation flags |
| * |
| * This function notifies cfg80211 that the device joined an IBSS or |
| * switched to a different BSSID. Before this function can be called, |
| * either a beacon has to have been received from the IBSS, or one of |
| * the cfg80211_inform_bss{,_frame} functions must have been called |
| * with the locally generated beacon -- this guarantees that there is |
| * always a scan result for this IBSS. cfg80211 will handle the rest. |
| */ |
| void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp); |
| |
| /** |
| * cfg80211_notify_new_candidate - notify cfg80211 of a new mesh peer candidate |
| * |
| * @dev: network device |
| * @macaddr: the MAC address of the new candidate |
| * @ie: information elements advertised by the peer candidate |
| * @ie_len: lenght of the information elements buffer |
| * @gfp: allocation flags |
| * |
| * This function notifies cfg80211 that the mesh peer candidate has been |
| * detected, most likely via a beacon or, less likely, via a probe response. |
| * cfg80211 then sends a notification to userspace. |
| */ |
| void cfg80211_notify_new_peer_candidate(struct net_device *dev, |
| const u8 *macaddr, const u8 *ie, u8 ie_len, gfp_t gfp); |
| |
| /** |
| * DOC: RFkill integration |
| * |
| * RFkill integration in cfg80211 is almost invisible to drivers, |
| * as cfg80211 automatically registers an rfkill instance for each |
| * wireless device it knows about. Soft kill is also translated |
| * into disconnecting and turning all interfaces off, drivers are |
| * expected to turn off the device when all interfaces are down. |
| * |
| * However, devices may have a hard RFkill line, in which case they |
| * also need to interact with the rfkill subsystem, via cfg80211. |
| * They can do this with a few helper functions documented here. |
| */ |
| |
| /** |
| * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state |
| * @wiphy: the wiphy |
| * @blocked: block status |
| */ |
| void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked); |
| |
| /** |
| * wiphy_rfkill_start_polling - start polling rfkill |
| * @wiphy: the wiphy |
| */ |
| void wiphy_rfkill_start_polling(struct wiphy *wiphy); |
| |
| /** |
| * wiphy_rfkill_stop_polling - stop polling rfkill |
| * @wiphy: the wiphy |
| */ |
| void wiphy_rfkill_stop_polling(struct wiphy *wiphy); |
| |
| #ifdef CONFIG_NL80211_TESTMODE |
| /** |
| * DOC: Test mode |
| * |
| * Test mode is a set of utility functions to allow drivers to |
| * interact with driver-specific tools to aid, for instance, |
| * factory programming. |
| * |
| * This chapter describes how drivers interact with it, for more |
| * information see the nl80211 book's chapter on it. |
| */ |
| |
| /** |
| * cfg80211_testmode_alloc_reply_skb - allocate testmode reply |
| * @wiphy: the wiphy |
| * @approxlen: an upper bound of the length of the data that will |
| * be put into the skb |
| * |
| * This function allocates and pre-fills an skb for a reply to |
| * the testmode command. Since it is intended for a reply, calling |
| * it outside of the @testmode_cmd operation is invalid. |
| * |
| * The returned skb (or %NULL if any errors happen) is pre-filled |
| * with the wiphy index and set up in a way that any data that is |
| * put into the skb (with skb_put(), nla_put() or similar) will end |
| * up being within the %NL80211_ATTR_TESTDATA attribute, so all that |
| * needs to be done with the skb is adding data for the corresponding |
| * userspace tool which can then read that data out of the testdata |
| * attribute. You must not modify the skb in any other way. |
| * |
| * When done, call cfg80211_testmode_reply() with the skb and return |
| * its error code as the result of the @testmode_cmd operation. |
| */ |
| struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, |
| int approxlen); |
| |
| /** |
| * cfg80211_testmode_reply - send the reply skb |
| * @skb: The skb, must have been allocated with |
| * cfg80211_testmode_alloc_reply_skb() |
| * |
| * Returns an error code or 0 on success, since calling this |
| * function will usually be the last thing before returning |
| * from the @testmode_cmd you should return the error code. |
| * Note that this function consumes the skb regardless of the |
| * return value. |
| */ |
| int cfg80211_testmode_reply(struct sk_buff *skb); |
| |
| /** |
| * cfg80211_testmode_alloc_event_skb - allocate testmode event |
| * @wiphy: the wiphy |
| * @approxlen: an upper bound of the length of the data that will |
| * be put into the skb |
| * @gfp: allocation flags |
| * |
| * This function allocates and pre-fills an skb for an event on the |
| * testmode multicast group. |
| * |
| * The returned skb (or %NULL if any errors happen) is set up in the |
| * same way as with cfg80211_testmode_alloc_reply_skb() but prepared |
| * for an event. As there, you should simply add data to it that will |
| * then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must |
| * not modify the skb in any other way. |
| * |
| * When done filling the skb, call cfg80211_testmode_event() with the |
| * skb to send the event. |
| */ |
| struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy, |
| int approxlen, gfp_t gfp); |
| |
| /** |
| * cfg80211_testmode_event - send the event |
| * @skb: The skb, must have been allocated with |
| * cfg80211_testmode_alloc_event_skb() |
| * @gfp: allocation flags |
| * |
| * This function sends the given @skb, which must have been allocated |
| * by cfg80211_testmode_alloc_event_skb(), as an event. It always |
| * consumes it. |
| */ |
| void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp); |
| |
| #define CFG80211_TESTMODE_CMD(cmd) .testmode_cmd = (cmd), |
| #define CFG80211_TESTMODE_DUMP(cmd) .testmode_dump = (cmd), |
| #else |
| #define CFG80211_TESTMODE_CMD(cmd) |
| #define CFG80211_TESTMODE_DUMP(cmd) |
| #endif |
| |
| /** |
| * cfg80211_connect_result - notify cfg80211 of connection result |
| * |
| * @dev: network device |
| * @bssid: the BSSID of the AP |
| * @req_ie: association request IEs (maybe be %NULL) |
| * @req_ie_len: association request IEs length |
| * @resp_ie: association response IEs (may be %NULL) |
| * @resp_ie_len: assoc response IEs length |
| * @status: status code, 0 for successful connection, use |
| * %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you |
| * the real status code for failures. |
| * @gfp: allocation flags |
| * |
| * It should be called by the underlying driver whenever connect() has |
| * succeeded. |
| */ |
| void cfg80211_connect_result(struct net_device *dev, const u8 *bssid, |
| const u8 *req_ie, size_t req_ie_len, |
| const u8 *resp_ie, size_t resp_ie_len, |
| u16 status, gfp_t gfp); |
| |
| /** |
| * cfg80211_roamed - notify cfg80211 of roaming |
| * |
| * @dev: network device |
| * @channel: the channel of the new AP |
| * @bssid: the BSSID of the new AP |
| * @req_ie: association request IEs (maybe be %NULL) |
| * @req_ie_len: association request IEs length |
| * @resp_ie: association response IEs (may be %NULL) |
| * @resp_ie_len: assoc response IEs length |
| * @gfp: allocation flags |
| * |
| * It should be called by the underlying driver whenever it roamed |
| * from one AP to another while connected. |
| */ |
| void cfg80211_roamed(struct net_device *dev, |
| struct ieee80211_channel *channel, |
| const u8 *bssid, |
| const u8 *req_ie, size_t req_ie_len, |
| const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp); |
| |
| /** |
| * cfg80211_disconnected - notify cfg80211 that connection was dropped |
| * |
| * @dev: network device |
| * @ie: information elements of the deauth/disassoc frame (may be %NULL) |
| * @ie_len: length of IEs |
| * @reason: reason code for the disconnection, set it to 0 if unknown |
| * @gfp: allocation flags |
| * |
| * After it calls this function, the driver should enter an idle state |
| * and not try to connect to any AP any more. |
| */ |
| void cfg80211_disconnected(struct net_device *dev, u16 reason, |
| u8 *ie, size_t ie_len, gfp_t gfp); |
| |
| /** |
| * cfg80211_ready_on_channel - notification of remain_on_channel start |
| * @dev: network device |
| * @cookie: the request cookie |
| * @chan: The current channel (from remain_on_channel request) |
| * @channel_type: Channel type |
| * @duration: Duration in milliseconds that the driver intents to remain on the |
| * channel |
| * @gfp: allocation flags |
| */ |
| void cfg80211_ready_on_channel(struct net_device *dev, u64 cookie, |
| struct ieee80211_channel *chan, |
| enum nl80211_channel_type channel_type, |
| unsigned int duration, gfp_t gfp); |
| |
| /** |
| * cfg80211_remain_on_channel_expired - remain_on_channel duration expired |
| * @dev: network device |
| * @cookie: the request cookie |
| * @chan: The current channel (from remain_on_channel request) |
| * @channel_type: Channel type |
| * @gfp: allocation flags |
| */ |
| void cfg80211_remain_on_channel_expired(struct net_device *dev, |
| u64 cookie, |
| struct ieee80211_channel *chan, |
| enum nl80211_channel_type channel_type, |
| gfp_t gfp); |
| |
| |
| /** |
| * cfg80211_new_sta - notify userspace about station |
| * |
| * @dev: the netdev |
| * @mac_addr: the station's address |
| * @sinfo: the station information |
| * @gfp: allocation flags |
| */ |
| void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr, |
| struct station_info *sinfo, gfp_t gfp); |
| |
| /** |
| * cfg80211_del_sta - notify userspace about deletion of a station |
| * |
| * @dev: the netdev |
| * @mac_addr: the station's address |
| * @gfp: allocation flags |
| */ |
| void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp); |
| |
| /** |
| * cfg80211_rx_mgmt - notification of received, unprocessed management frame |
| * @dev: network device |
| * @freq: Frequency on which the frame was received in MHz |
| * @buf: Management frame (header + body) |
| * @len: length of the frame data |
| * @gfp: context flags |
| * |
| * Returns %true if a user space application has registered for this frame. |
| * For action frames, that makes it responsible for rejecting unrecognized |
| * action frames; %false otherwise, in which case for action frames the |
| * driver is responsible for rejecting the frame. |
| * |
| * This function is called whenever an Action frame is received for a station |
| * mode interface, but is not processed in kernel. |
| */ |
| bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf, |
| size_t len, gfp_t gfp); |
| |
| /** |
| * cfg80211_mgmt_tx_status - notification of TX status for management frame |
| * @dev: network device |
| * @cookie: Cookie returned by cfg80211_ops::mgmt_tx() |
| * @buf: Management frame (header + body) |
| * @len: length of the frame data |
| * @ack: Whether frame was acknowledged |
| * @gfp: context flags |
| * |
| * This function is called whenever a management frame was requested to be |
| * transmitted with cfg80211_ops::mgmt_tx() to report the TX status of the |
| * transmission attempt. |
| */ |
| void cfg80211_mgmt_tx_status(struct net_device *dev, u64 cookie, |
| const u8 *buf, size_t len, bool ack, gfp_t gfp); |
| |
| |
| /** |
| * cfg80211_cqm_rssi_notify - connection quality monitoring rssi event |
| * @dev: network device |
| * @rssi_event: the triggered RSSI event |
| * @gfp: context flags |
| * |
| * This function is called when a configured connection quality monitoring |
| * rssi threshold reached event occurs. |
| */ |
| void cfg80211_cqm_rssi_notify(struct net_device *dev, |
| enum nl80211_cqm_rssi_threshold_event rssi_event, |
| gfp_t gfp); |
| |
| /** |
| * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer |
| * @dev: network device |
| * @peer: peer's MAC address |
| * @num_packets: how many packets were lost -- should be a fixed threshold |
| * but probably no less than maybe 50, or maybe a throughput dependent |
| * threshold (to account for temporary interference) |
| * @gfp: context flags |
| */ |
| void cfg80211_cqm_pktloss_notify(struct net_device *dev, |
| const u8 *peer, u32 num_packets, gfp_t gfp); |
| |
| /** |
| * cfg80211_gtk_rekey_notify - notify userspace about driver rekeying |
| * @dev: network device |
| * @bssid: BSSID of AP (to avoid races) |
| * @replay_ctr: new replay counter |
| * @gfp: allocation flags |
| */ |
| void cfg80211_gtk_rekey_notify(struct net_device *dev, const u8 *bssid, |
| const u8 *replay_ctr, gfp_t gfp); |
| |
| /** |
| * cfg80211_pmksa_candidate_notify - notify about PMKSA caching candidate |
| * @dev: network device |
| * @index: candidate index (the smaller the index, the higher the priority) |
| * @bssid: BSSID of AP |
| * @preauth: Whether AP advertises support for RSN pre-authentication |
| * @gfp: allocation flags |
| */ |
| void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index, |
| const u8 *bssid, bool preauth, gfp_t gfp); |
| |
| /* Logging, debugging and troubleshooting/diagnostic helpers. */ |
| |
| /* wiphy_printk helpers, similar to dev_printk */ |
| |
| #define wiphy_printk(level, wiphy, format, args...) \ |
| dev_printk(level, &(wiphy)->dev, format, ##args) |
| #define wiphy_emerg(wiphy, format, args...) \ |
| dev_emerg(&(wiphy)->dev, format, ##args) |
| #define wiphy_alert(wiphy, format, args...) \ |
| dev_alert(&(wiphy)->dev, format, ##args) |
| #define wiphy_crit(wiphy, format, args...) \ |
| dev_crit(&(wiphy)->dev, format, ##args) |
| #define wiphy_err(wiphy, format, args...) \ |
| dev_err(&(wiphy)->dev, format, ##args) |
| #define wiphy_warn(wiphy, format, args...) \ |
| dev_warn(&(wiphy)->dev, format, ##args) |
| #define wiphy_notice(wiphy, format, args...) \ |
| dev_notice(&(wiphy)->dev, format, ##args) |
| #define wiphy_info(wiphy, format, args...) \ |
| dev_info(&(wiphy)->dev, format, ##args) |
| |
| #define wiphy_debug(wiphy, format, args...) \ |
| wiphy_printk(KERN_DEBUG, wiphy, format, ##args) |
| |
| #define wiphy_dbg(wiphy, format, args...) \ |
| dev_dbg(&(wiphy)->dev, format, ##args) |
| |
| #if defined(VERBOSE_DEBUG) |
| #define wiphy_vdbg wiphy_dbg |
| #else |
| #define wiphy_vdbg(wiphy, format, args...) \ |
| ({ \ |
| if (0) \ |
| wiphy_printk(KERN_DEBUG, wiphy, format, ##args); \ |
| 0; \ |
| }) |
| #endif |
| |
| /* |
| * wiphy_WARN() acts like wiphy_printk(), but with the key difference |
| * of using a WARN/WARN_ON to get the message out, including the |
| * file/line information and a backtrace. |
| */ |
| #define wiphy_WARN(wiphy, format, args...) \ |
| WARN(1, "wiphy: %s\n" format, wiphy_name(wiphy), ##args); |
| |
| #endif /* __NET_CFG80211_H */ |
