| |
| // vim:tw=110:ts=4: |
| #ifndef HCFCFG_H |
| #define HCFCFG_H 1 |
| |
| /************************************************************************************************************* |
| * |
| * FILE : hcfcfg.tpl // hcfcfg.h |
| * |
| * DATE : $Date: 2004/08/05 11:47:10 $ $Revision: 1.6 $ |
| * Original: 2004/04/08 15:18:16 Revision: 1.40 Tag: t20040408_01 |
| * Original: 2004/04/01 15:32:55 Revision: 1.38 Tag: t7_20040401_01 |
| * Original: 2004/03/10 15:39:28 Revision: 1.34 Tag: t20040310_01 |
| * Original: 2004/03/03 14:10:12 Revision: 1.32 Tag: t20040304_01 |
| * Original: 2004/03/02 09:27:12 Revision: 1.30 Tag: t20040302_03 |
| * Original: 2004/02/24 13:00:28 Revision: 1.25 Tag: t20040224_01 |
| * Original: 2004/02/18 17:13:57 Revision: 1.23 Tag: t20040219_01 |
| * |
| * AUTHOR : Nico Valster |
| * |
| * DESC : HCF Customization Macros |
| * hcfcfg.tpl list all #defines which must be specified to: |
| * adjust the HCF functions defined in HCF.C to the characteristics of a specific environment |
| * o maximum sizes for messages |
| * o Endianess |
| * Compiler specific macros |
| * o port I/O macros |
| * o type definitions |
| * |
| * By copying HCFCFG.TPL to HCFCFG.H and -if needed- modifying the #defines the WCI functionality can be |
| * tailored |
| * |
| * Supported environments: |
| * WVLAN_41 Miniport NDIS 3.1 |
| * WVLAN_42 Packet Microsoft Visual C 1.5 |
| * WVLAN_43 16 bits DOS ODI Microsoft Visual C 1.5 |
| * WVLAN_44 32 bits ODI (__NETWARE_386__) WATCOM |
| * WVLAN_45 MAC_OS MPW?, Symantec? |
| * WVLAN_46 Windows CE (_WIN32_WCE) Microsoft ? |
| * WVLAN_47 LINUX (__LINUX__) GCC, discarded, based on GPL'ed HCF-light |
| * WVLAN_48 Miniport NDIS 5 |
| * WVLAN_49 LINUX (__LINUX__) GCC, originally based on pre-compiled HCF_library |
| * migrated to use the HCF sources when Lucent Technologies |
| * brought the HCF module under GPL |
| * WVLAN_51 Miniport USB NDIS 5 |
| * WVLAN_52 Miniport NDIS 4 |
| * WVLAN_53 VxWorks END Station driver |
| * WVLAN_54 VxWorks END Access Point driver |
| * WVLAN_81 WavePoint BORLAND C |
| * WCITST Inhouse test tool Microsoft Visual C 1.5 |
| * WSU WaveLAN Station Update Microsoft Visual C ?? |
| * SCO UNIX not yet actually used ? ? |
| * __ppc OEM supplied ? |
| * _AM29K OEM supplied ? |
| * ? OEM supplied Microtec Research 80X86 Compiler |
| * |
| ************************************************************************************************************** |
| * |
| * |
| * SOFTWARE LICENSE |
| * |
| * This software is provided subject to the following terms and conditions, |
| * which you should read carefully before using the software. Using this |
| * software indicates your acceptance of these terms and conditions. If you do |
| * not agree with these terms and conditions, do not use the software. |
| * |
| * COPYRIGHT © 1994 - 1995 by AT&T. All Rights Reserved |
| * COPYRIGHT © 1996 - 2000 by Lucent Technologies. All Rights Reserved |
| * COPYRIGHT © 2001 - 2004 by Agere Systems Inc. All Rights Reserved |
| * All rights reserved. |
| * |
| * Redistribution and use in source or binary forms, with or without |
| * modifications, are permitted provided that the following conditions are met: |
| * |
| * . Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following Disclaimer as comments in the code as |
| * well as in the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * . Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following Disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * . Neither the name of Agere Systems Inc. nor the names of the contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * Disclaimer |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, |
| * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY |
| * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN |
| * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT |
| * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH |
| * DAMAGE. |
| * |
| * |
| *************************************************************************************************************/ |
| |
| /* Alignment |
| * Some platforms can access words on odd boundaries (with possibly an performance impact), at other |
| * platforms such an access may result in a memory access violation. |
| * It is assumed that everywhere where the HCF casts a char pointer into a word pointer, the alignment |
| * criteria are met. This put some restrictions on the MSF, which are assumed to be "automatically" fulfilled |
| * at the applicable platforms |
| * To assert this assumption, the macro HCF_ALIGN can be defined. The default value is 1, meaning byte |
| * alignment (or no alignment), a value of 2 means word alignment, a value of 4 means double word alignment |
| */ |
| |
| /***************************** IN_PORT_STRING_8_16 S a m p l e s ***************************************** |
| |
| // C implementation which let the processor handle the word-at-byte-boundary problem |
| #define IN_PORT_STRING_8_16( port, addr, n) while ( n-- ) \ |
| { *(hcf_16 FAR*)addr = IN_PORT_WORD( port ); ((hcf_8 FAR*)addr)+=2; } |
| |
| // C implementation which handles the word-at-byte-boundary problem |
| #define IN_PORT_STRING_8_16( port, addr, n) while ( n-- ) \ |
| { hcf_16 i = IN_PORT_WORD(port); *((hcf_8 FAR*)addr)++ = (hcf_8)i; *((hcf_8 FAR*)addr)++ = (hcf_8)(i>>8);} |
| |
| // Assembler implementation |
| #define IN_PORT_STRING_8_16( port, addr, len) __asm \ |
| { \ |
| __asm push di \ |
| __asm push es \ |
| __asm mov cx,len \ |
| __asm les di,addr \ |
| __asm mov dx,port \ |
| __asm rep insw \ |
| __asm pop es \ |
| __asm pop di \ |
| } |
| |
| |
| ***************************** OUT_PORT_STRING_8_16 S a m p l e s ****************************************** |
| |
| // C implementation which let the processor handle the word-at-byte-boundary problem |
| #define OUT_PORT_STRING_8_16( port, addr, n) while ( n-- ) \ |
| { OUT_PORT_WORD( port, *(hcf_16 FAR*)addr ) ; ((hcf_8 FAR*)addr)+=2; } |
| |
| // C implementation which handles the word-at-byte-boundary problem |
| #define OUT_PORT_STRING_8_16( port, addr, n) while ( n-- ) \ |
| { OUT_PORT_WORD( port, *((hcf_8 FAR*)addr) | *(((hcf_8 FAR*)addr)+1)<<8 ); (hcf_8 FAR*)addr+=2; } |
| |
| // Assembler implementation |
| #define OUT_PORT_STRING_8_16( port, addr, len) __asm \ |
| { \ |
| __asm push si \ |
| __asm push ds \ |
| __asm mov cx,len \ |
| __asm lds si,addr \ |
| __asm mov dx,port \ |
| __asm rep outsw \ |
| __asm pop ds \ |
| __asm pop si \ |
| } |
| |
| *************************************************************************************************************/ |
| |
| |
| /************************************************************************************************/ |
| /****************** C O M P I L E R S P E C I F I C M A C R O S ***************************/ |
| /************************************************************************************************/ |
| /************************************************************************************************* |
| * |
| * !!!!!!!!!!!!!!!!!!!!!!!!! Note to the HCF-implementor !!!!!!!!!!!!!!!!!!!!!!!!! |
| * !!!! Do not call these macros with parameters which introduce side effects !!!! |
| * !!!!!!!!!!!!!!!!!!!!!!!!! Note to the HCF-implementor !!!!!!!!!!!!!!!!!!!!!!!!! |
| * |
| * |
| * By selecting the appropriate Macro definitions by means of modifying the "#ifdef 0/1" lines, the HCF can be |
| * adjusted for the I/O characteristics of a specific compiler |
| * |
| * If needed the macros can be modified or replaced with definitions appropriate for your personal platform. |
| * If you need to make such changes it is appreciated if you inform Agere Systems |
| * That way the changes can become part of the next release of the WCI |
| * |
| * For convenience of the MSF-programmer, all macros are allowed to modify their parameters (although some |
| * might argue that this would constitute bad coding practice). This has its implications on the HCF, e.g. as a |
| * consequence these macros should not be called with parameters which have side effects, e.g auto-increment. |
| * |
| * in the Microsoft implementation of inline assembly it is O.K. to corrupt all flags except the direction flag |
| * and to corrupt all registers except the segment registers and EDI, ESI, ESP and EBP (or their 16 bits |
| * equivalents). Other environments may have other constraints |
| * |
| * in the Intel environment it is O.K to have a word (as a 16 bits quantity) at a byte boundary, hence |
| * IN_/OUT_PORT_STRING_8_16 can move words between PC-memory and NIC-memory with as only constraint that the |
| * words are on a word boundary in NIC-memory. This does not hold true for all conceivable environments, e.g. |
| * an Motorola 68xxx does not allow this. Probably/hopefully the boundary conditions imposed by these type of |
| * platforms prevent this case from materializing. If this is not the case, OUT_PORT_STRING_8_16 must be coded |
| * by combining two Host memory hcf_8 values at a time to a single hcf_16 value to be passed to the NIC and |
| * IN_PORT_STRING_8_16 the single hcf_16 retrieved from the NIC must be split in two hcf_8 values to be stored |
| * in Host memory (see the sample code above) |
| * |
| * The prototypes and functional description of the macros are: |
| * |
| * hcf_16 IN_PORT_WORD( hcf_16 port ) |
| * Reads a word (16 bits) from the specified port |
| * |
| * void OUT_PORT_WORD( hcf_16 port, hcf_16 value) |
| * Writes a word (16 bits) to the specified port |
| * |
| * hcf_16 IN_PORT_DWORD( hcf_16 port ) |
| * Reads a dword (32 bits) from the specified port |
| * |
| * void OUT_PORT_DWORD( hcf_16 port, hcf_32 value) |
| * Writes a dword (32 bits) to the specified port |
| * |
| * void IN_PORT_STRING_8_16( port, addr, len) |
| * Reads len number of words (16 bits) from NIC memory via the specified port to the (FAR) |
| * byte-pointer addr in PC-RAM |
| * Note that len specifies the number of words, NOT the number of bytes |
| * !!!NOTE, although len specifies the number of words, addr MUST be a char pointer NOTE!!! |
| * See also the common notes for IN_PORT_STRING_8_16 and OUT_PORT_STRING_8_16 |
| * |
| * void OUT_PORT_STRING_8_16( port, addr, len) |
| * Writes len number of words (16 bits) from the (FAR) byte-pointer addr in PC-RAM via the specified |
| * port to NIC memory |
| * Note that len specifies the number of words, NOT the number of bytes. |
| * !!!NOTE, although len specifies the number of words, addr MUST be a char pointer NOTE!!! |
| * |
| * The peculiar combination of word-length and char pointers for IN_PORT_STRING_8_16 as well as |
| * OUT_PORT_STRING_8_16 is justified by the assumption that it offers a more optimal algorithm |
| * |
| * void IN_PORT_STRING_32( port, addr, len) |
| * Reads len number of double-words (32 bits) from NIC memory via the specified port to the (FAR) |
| * double-word address addr in PC-RAM |
| * |
| * void OUT_PORT_STRING_32( port, addr, len) |
| * Writes len number of double-words (32 bits) from the (FAR) double-word address addr in PC-RAM via |
| * the specified port to NIC memory |
| * |
| * !!!!!!!!!!!!!!!!!!!!!!!!! Note to the HCF-implementor !!!!!!!!!!!!!!!!!!!!!!!!! |
| * !!!! Do not call these macros with parameters which introduce side effects !!!! |
| * !!!!!!!!!!!!!!!!!!!!!!!!! Note to the HCF-implementor !!!!!!!!!!!!!!!!!!!!!!!!! |
| * |
| *************************************************************************************************/ |
| |
| /**************************** define INT Types ******************************/ |
| typedef unsigned char hcf_8; |
| typedef unsigned short hcf_16; |
| typedef unsigned long hcf_32; |
| |
| /**************************** define I/O Types ******************************/ |
| #define HCF_IO_MEM 0x0001 // memory mapped I/O ( 0: Port I/O ) |
| #define HCF_IO_32BITS 0x0002 // 32Bits support ( 0: only 16 Bits I/O) |
| |
| /****************************** #define HCF_TYPE ********************************/ |
| #define HCF_TYPE_NONE 0x0000 // No type |
| #define HCF_TYPE_WPA 0x0001 // WPA support |
| #define HCF_TYPE_USB 0x0002 // reserved (USB Dongle driver support) |
| //#define HCF_TYPE_HII 0x0004 // Hermes-II, to discriminate H-I and H-II CFG_HCF_OPT_STRCT |
| #define HCF_TYPE_WARP 0x0008 // WARP F/W |
| #define HCF_TYPE_PRELOADED 0x0040 // pre-loaded F/W |
| #define HCF_TYPE_HII5 0x0080 // Hermes-2.5 H/W |
| #define HCF_TYPE_CCX 0x0100 // CKIP |
| #define HCF_TYPE_BEAGLE_HII5 0x0200 // Beagle Hermes-2.5 H/W |
| #define HCF_TYPE_TX_DELAY 0x4000 // Delayed transmission ( non-DMA only) |
| |
| /****************************** #define HCF_ASSERT ******************************/ |
| #define HCF_ASSERT_NONE 0x0000 // No assert support |
| #define HCF_ASSERT_PRINTF 0x0001 // Hermes generated debug info |
| #define HCF_ASSERT_SW_SUP 0x0002 // logging via Hermes support register |
| #define HCF_ASSERT_MB 0x0004 // logging via Mailbox |
| #define HCF_ASSERT_RT_MSF_RTN 0x4000 // dynamically binding of msf_assert routine |
| #define HCF_ASSERT_LNK_MSF_RTN 0x8000 // statically binding of msf_assert routine |
| |
| /****************************** #define HCF_ENCAP *******************************/ |
| #define HCF_ENC_NONE 0x0000 // No encapsulation support |
| #define HCF_ENC 0x0001 // HCF handles En-/Decapsulation |
| #define HCF_ENC_SUP 0x0002 // HCF supports MSF to handle En-/Decapsulation |
| |
| /****************************** #define HCF_EXT *********************************/ |
| #define HCF_EXT_NONE 0x0000 // No expanded features |
| #define HCF_EXT_INFO_LOG 0x0001 // logging of Hermes Info frames |
| //#define HCF_EXT_INT_TX_OK 0x0002 // RESERVED!!! monitoring successful Tx message |
| #define HCF_EXT_INT_TX_EX 0x0004 // monitoring unsuccessful Tx message |
| //#define HCF_EXT_MON_MODE 0x0008 // LEGACY |
| #define HCF_EXT_TALLIES_FW 0x0010 // support for up to 32 Hermes Engineering tallies |
| #define HCF_EXT_TALLIES_HCF 0x0020 // support for up to 8 HCF Engineering tallies |
| #define HCF_EXT_NIC_ACCESS 0x0040 // direct access via Aux-ports and to Hermes registers and commands |
| #define HCF_EXT_MB 0x0080 // MailBox code expanded |
| #define HCF_EXT_IFB_STRCT 0x0100 // MSF custom pointer in IFB |
| #define HCF_EXT_DESC_STRCT 0x0200 // MSF custom pointer in Descriptor |
| #define HCF_EXT_TX_CONT 0x4000 // Continuous transmit test |
| #define HCF_EXT_INT_TICK 0x8000 // enables TimerTick interrupt generation |
| |
| /****************************** #define HCF_SLEEP *******************************/ |
| #define HCF_DDS 0x0001 // Disconnected Deep Sleep |
| #define HCF_CDS 0x0002 // Connected Deep Sleep |
| |
| /****************************** #define HCF_TALLIES ******************************/ |
| #define HCF_TALLIES_NONE 0x0000 // No tally support |
| #define HCF_TALLIES_NIC 0x0001 // Hermes Tallies accumulated in IFB |
| #define HCF_TALLIES_HCF 0x0002 // HCF Tallies accumulated in IFB |
| #define HCF_TALLIES_RESET 0x8000 // Tallies in IFB are reset when reported via hcf_get_info |
| |
| /************************************************************************************************/ |
| /****************************************** L I N U X *****************************************/ |
| /************************************************************************************************/ |
| |
| #ifdef WVLAN_49 |
| #include <asm/io.h> |
| //#include <linux/module.h> |
| #include <wl_version.h> |
| |
| /* The following macro ensures that no symbols are exported, minimizing the chance of a symbol |
| collision in the kernel */ |
| //EXPORT_NO_SYMBOLS; //;?this place seems not appropriately to me |
| |
| //#define HCF_SLEEP (HCF_CDS | HCF_DDS ) |
| #define HCF_SLEEP (HCF_CDS) |
| |
| /* Note: Non-WARP firmware all support WPA. However the original Agere |
| * linux driver does not enable WPA. Enabling WPA here causes whatever |
| * preliminary WPA logic to be included, some of which may be specific |
| * to HERMESI. |
| * |
| * Various comment are clear that WARP and WPA are not compatible |
| * (which may just mean WARP does WPA in a different fashion). |
| */ |
| |
| /* #define HCF_TYPE (HCF_TYPE_HII5|HCF_TYPE_STA|HCF_TYPE_AP) */ |
| #ifdef HERMES25 |
| #ifdef WARP |
| #define HCF_TYPE ( HCF_TYPE_WARP | HCF_TYPE_HII5 ) |
| #else |
| #define HCF_TYPE (HCF_TYPE_HII5 | HCF_TYPE_WPA) |
| #endif /* WARP */ |
| #else |
| #define HCF_TYPE HCF_TYPE_WPA |
| #endif /* HERMES25 */ |
| |
| #ifdef ENABLE_DMA |
| #define HCF_DMA 1 |
| #endif // ENABLE_DMA |
| |
| /* We now need a switch to include support for the Mailbox and other necessary extensions */ |
| #define HCF_EXT ( HCF_EXT_MB | HCF_EXT_INFO_LOG | HCF_EXT_INT_TICK )//get deepsleep exercise going |
| |
| /* ;? The Linux MSF still uses these definitions; define it here until it's removed */ |
| #ifndef HCF_TYPE_HII |
| #define HCF_TYPE_HII 0x0004 |
| #endif |
| |
| #ifndef HCF_TYPE_AP |
| #define HCF_TYPE_AP 0x0010 |
| #endif |
| |
| #ifndef HCF_TYPE_STA |
| #define HCF_TYPE_STA 0x0020 |
| #endif // HCF_TYPE_STA |
| |
| /* Guarantees word alignment */ |
| #define HCF_ALIGN 2 |
| |
| /* Endian macros CNV_INT_TO_LITTLE() and CNV_LITTLE_TO_INT() were renamed to |
| CNV_SHORT_TO_LITTLE() and CNV_LITTLE_TO_SHORT() */ |
| #ifndef CNV_INT_TO_LITTLE |
| #define CNV_INT_TO_LITTLE CNV_SHORT_TO_LITTLE |
| #endif |
| |
| #ifndef CNV_LITTLE_TO_INT |
| #define CNV_LITTLE_TO_INT CNV_LITTLE_TO_SHORT |
| #endif |
| |
| #define HCF_ERR_BUSY 0x06 |
| |
| /* UIL defines were removed from the HCF */ |
| #define UIL_SUCCESS HCF_SUCCESS |
| #define UIL_ERR_TIME_OUT HCF_ERR_TIME_OUT |
| #define UIL_ERR_NO_NIC HCF_ERR_NO_NIC |
| #define UIL_ERR_LEN HCF_ERR_LEN |
| #define UIL_ERR_MIN HCF_ERR_MAX /*end of HCF errors which are passed through to UIL |
| *** ** *** ****** ***** *** ****** ******* ** *** */ |
| #define UIL_ERR_IN_USE 0x44 |
| #define UIL_ERR_WRONG_IFB 0x46 |
| #define UIL_ERR_MAX 0x7F /*upper boundary of UIL errors without HCF-pendant |
| ***** ******** ** *** ****** ******* *** ******* */ |
| #define UIL_ERR_BUSY HCF_ERR_BUSY |
| #define UIL_ERR_DIAG_1 HCF_ERR_DIAG_1 |
| #define UIL_FAILURE 0xFF /* 20010705 nv this relick should be eridicated */ |
| #define UIL_ERR_PIF_CONFLICT 0x40 //obsolete |
| #define UIL_ERR_INCOMP_DRV 0x41 //obsolete |
| #define UIL_ERR_DOS_CALL 0x43 //obsolete |
| #define UIL_ERR_NO_DRV 0x42 //obsolete |
| #define UIL_ERR_NSTL 0x45 //obsolete |
| |
| |
| |
| #if 0 //;? #ifdef get this going LATER HERMES25 |
| #define HCF_IO HCF_IO_32BITS |
| #define HCF_DMA 1 |
| #define HCF_DESC_STRCT_EXT 4 |
| |
| /* Switch for BusMaster DMA support. Note that the above define includes the DMA-specific HCF |
| code in the build. This define sets the MSF to use DMA; if ENABLE_DMA is not defined, then |
| port I/O will be used in the build */ |
| #ifndef BUS_PCMCIA |
| #define ENABLE_DMA |
| #endif // USE_PCMCIA |
| |
| #endif // HERMES25 |
| |
| |
| /* Overrule standard WaveLAN Packet Size when in DMA mode */ |
| #ifdef ENABLE_DMA |
| #define HCF_MAX_PACKET_SIZE 2304 |
| #else |
| #define HCF_MAX_PACKET_SIZE 1514 |
| #endif // ENABLE_DMA |
| |
| /* The following sets the component ID, as well as the versioning. See also wl_version.h */ |
| #define MSF_COMPONENT_ID COMP_ID_LINUX |
| |
| #define MSF_COMPONENT_VAR DRV_VARIANT |
| #define MSF_COMPONENT_MAJOR_VER DRV_MAJOR_VERSION |
| #define MSF_COMPONENT_MINOR_VER DRV_MINOR_VERSION |
| |
| /* Define the following to turn on assertions in the HCF */ |
| //#define HCF_ASSERT 0x8000 |
| #define HCF_ASSERT HCF_ASSERT_LNK_MSF_RTN // statically binding of msf_assert routine |
| |
| #ifdef USE_BIG_ENDIAN |
| #define HCF_BIG_ENDIAN 1 |
| #else |
| #define HCF_BIG_ENDIAN 0 |
| #endif /* USE_BIG_ENDIAN */ |
| |
| /* Define the following if your system uses memory-mapped IO */ |
| //#define HCF_MEM_IO |
| |
| /* The following defines the standard macros required by the HCF to move data to/from the card */ |
| #define IN_PORT_BYTE(port) ((hcf_8)inb( (hcf_io)(port) )) |
| #define IN_PORT_WORD(port) ((hcf_16)inw( (hcf_io)(port) )) |
| #define OUT_PORT_BYTE(port, value) (outb( (hcf_8) (value), (hcf_io)(port) )) |
| #define OUT_PORT_WORD(port, value) (outw((hcf_16) (value), (hcf_io)(port) )) |
| |
| #define IN_PORT_STRING_16(port, dst, n) insw((hcf_io)(port), dst, n) |
| #define OUT_PORT_STRING_16(port, src, n) outsw((hcf_io)(port), src, n) |
| //#define IN_PORT_STRINGL(port, dst, n) insl((port), (dst), (n)) |
| //#define OUT_PORT_STRINGL(port, src, n) outsl((port), (src), (n)) |
| #define IN_PORT_STRING_32(port, dst, n) insl((port), (dst), (n)) |
| #define OUT_PORT_STRING_32(port, src, n) outsl((port), (src), (n)) |
| #define IN_PORT_HCF32(port) inl( (hcf_io)(port) ) |
| #define OUT_PORT_HCF32(port, value) outl((hcf_32)(value), (hcf_io)(port) ) |
| |
| #define IN_PORT_DWORD(port) IN_PORT_HCF32(port) |
| #define OUT_PORT_DWORD(port, value) OUT_PORT_HCF32(port, value) |
| |
| #define IN_PORT_STRING_8_16(port, addr, len) IN_PORT_STRING_16(port, addr, len) |
| #define OUT_PORT_STRING_8_16(port, addr, len) OUT_PORT_STRING_16(port, addr, len) |
| |
| #ifndef CFG_SCAN_CHANNELS_2GHZ |
| #define CFG_SCAN_CHANNELS_2GHZ 0xFCC2 |
| #endif /* CFG_SCAN_CHANNELS_2GHZ */ |
| |
| #define HCF_MAX_MSG 1600 //get going ;? |
| #endif // WVLAN_49 |
| |
| /************************************************************************************************************/ |
| /*********************************** **************************************/ |
| /************************************************************************************************************/ |
| #if ! defined HCF_ALIGN |
| #define HCF_ALIGN 1 //default to no alignment |
| #endif // HCF_ALIGN |
| |
| #if ! defined HCF_ASSERT |
| #define HCF_ASSERT 0 |
| #endif // HCF_ASSERT |
| |
| #if ! defined HCF_BIG_ENDIAN |
| #define HCF_BIG_ENDIAN 0 |
| #endif // HCF_BIG_ENDIAN |
| |
| #if ! defined HCF_DMA |
| #define HCF_DMA 0 |
| #endif // HCF_DMA |
| |
| #if ! defined HCF_ENCAP |
| #define HCF_ENCAP HCF_ENC |
| #endif // HCF_ENCAP |
| |
| #if ! defined HCF_EXT |
| #define HCF_EXT 0 |
| #endif // HCF_EXT |
| |
| #if ! defined HCF_INT_ON |
| #define HCF_INT_ON 1 |
| #endif // HCF_INT_ON |
| |
| #if ! defined HCF_IO |
| #define HCF_IO 0 //default 16 bits support only, port I/O |
| #endif // HCF_IO |
| |
| #if ! defined HCF_LEGACY |
| #define HCF_LEGACY 0 |
| #endif // HCF_LEGACY |
| |
| #if ! defined HCF_MAX_LTV |
| #define HCF_MAX_LTV 1200 // sufficient for all known purposes |
| #endif // HCF_MAX_LTV |
| |
| #if ! defined HCF_PROT_TIME |
| #define HCF_PROT_TIME 100 // number of 10K microsec protection timer against H/W malfunction |
| #endif // HCF_PROT_TIME |
| |
| #if ! defined HCF_SLEEP |
| #define HCF_SLEEP 0 |
| #endif // HCF_SLEEP |
| |
| #if ! defined HCF_TALLIES |
| #define HCF_TALLIES ( HCF_TALLIES_NIC | HCF_TALLIES_HCF ) |
| #endif // HCF_TALLIES |
| |
| #if ! defined HCF_TYPE |
| #define HCF_TYPE 0 |
| #endif // HCF_TYPE |
| |
| #if HCF_BIG_ENDIAN |
| #undef HCF_BIG_ENDIAN |
| #define HCF_BIG_ENDIAN 1 //just for convenience of generating cfg_hcf_opt |
| #endif // HCF_BIG_ENDIAN |
| |
| #if HCF_DMA |
| #undef HCF_DMA |
| #define HCF_DMA 1 //just for convenience of generating cfg_hcf_opt |
| #endif // HCF_DMA |
| |
| #if HCF_INT_ON |
| #undef HCF_INT_ON |
| #define HCF_INT_ON 1 //just for convenience of generating cfg_hcf_opt |
| #endif // HCF_INT_ON |
| |
| |
| #if ! defined IN_PORT_STRING_8_16 |
| #define IN_PORT_STRING_8_16(port, addr, len) IN_PORT_STRING_16(port, addr, len) |
| #define OUT_PORT_STRING_8_16(port, addr, len) OUT_PORT_STRING_16(port, addr, len) |
| #endif // IN_PORT_STRING_8_16 |
| |
| /************************************************************************************************/ |
| /********** *************/ |
| /************************************************************************************************/ |
| |
| #if ! defined FAR |
| #define FAR // default to flat 32-bits code |
| #endif // FAR |
| |
| typedef hcf_8 FAR *wci_bufp; // segmented 16-bits or flat 32-bits pointer to 8 bits unit |
| typedef hcf_16 FAR *wci_recordp; // segmented 16-bits or flat 32-bits pointer to 16 bits unit |
| |
| /* I/O Address size |
| * Platforms which use port mapped I/O will (in general) have a 64k I/O space, conveniently expressed in a |
| * 16-bits quantity |
| * Platforms which use memory mapped I/O will (in general) have an I/O space much larger than 64k, and need a |
| * 32-bits quantity to express the I/O base |
| */ |
| |
| #if HCF_IO & HCF_IO_MEM |
| typedef hcf_32 hcf_io; |
| #else |
| typedef hcf_16 hcf_io; |
| #endif //HCF_IO |
| |
| #if HCF_PROT_TIME > 128 |
| #define HCF_PROT_TIME_SHFT 3 |
| #define HCF_PROT_TIME_DIV 8 |
| #elif HCF_PROT_TIME > 64 |
| #define HCF_PROT_TIME_SHFT 2 |
| #define HCF_PROT_TIME_DIV 4 |
| #elif HCF_PROT_TIME > 32 |
| #define HCF_PROT_TIME_SHFT 1 |
| #define HCF_PROT_TIME_DIV 2 |
| #else //HCF_PROT_TIME >= 19 |
| #define HCF_PROT_TIME_SHFT 0 |
| #define HCF_PROT_TIME_DIV 1 |
| #endif |
| |
| #define HCF_PROT_TIME_CNT (HCF_PROT_TIME / HCF_PROT_TIME_DIV) |
| |
| |
| /************************************************************************************************************/ |
| /******************************************* . . . . . . . . . *********************************************/ |
| /************************************************************************************************************/ |
| |
| /* MSF_COMPONENT_ID is used to define the CFG_IDENTITY_STRCT in HCF.C |
| * CFG_IDENTITY_STRCT is defined in HCF.C purely based on convenience arguments. |
| * The HCF can not have the knowledge to determine the ComponentId field of the Identity record (aka as |
| * Version Record), therefore the MSF part of the Drivers must supply this value via the System Constant |
| * MSF_COMPONENT_ID. |
| * There is a set of values predefined in MDD.H (format COMP_ID_.....) |
| * |
| * Note that taking MSF_COMPONENT_ID as a default value for DUI_COMPAT_VAR is purely an implementation |
| * convenience, the numerical values of these two quantities have none functional relationship whatsoever. |
| */ |
| |
| #if defined MSF_COMPONENT_ID |
| |
| #if ! defined DUI_COMPAT_VAR |
| #define DUI_COMPAT_VAR MSF_COMPONENT_ID |
| #endif // DUI_COMPAT_VAR |
| |
| #if ! defined DUI_COMPAT_BOT //;?this way utilities can lower as well raise the bottom |
| #define DUI_COMPAT_BOT 8 |
| #endif // DUI_COMPAT_BOT |
| |
| #if ! defined DUI_COMPAT_TOP //;?this way utilities can lower as well raise the top |
| #define DUI_COMPAT_TOP 8 |
| #endif // DUI_COMPAT_TOP |
| |
| #endif // MSF_COMPONENT_ID |
| |
| #if (HCF_TYPE) & HCF_TYPE_HII5 |
| |
| #if ! defined HCF_HSI_VAR_5 |
| #define HCF_HSI_VAR_5 |
| #endif // HCF_HSI_VAR_5 |
| |
| #if ! defined HCF_APF_VAR_4 |
| #define HCF_APF_VAR_4 |
| #endif // HCF_APF_VAR_4 |
| |
| #if (HCF_TYPE) & HCF_TYPE_WARP |
| #if ! defined HCF_STA_VAR_4 |
| #define HCF_STA_VAR_4 |
| #endif // HCF_STA_VAR_4 |
| #else |
| #if ! defined HCF_STA_VAR_2 |
| #define HCF_STA_VAR_2 |
| #endif // HCF_STA_VAR_2 |
| #endif |
| |
| #if defined HCF_HSI_VAR_4 |
| err: HSI variants 4 correspond with HII; |
| #endif // HCF_HSI_VAR_4 |
| |
| #else |
| |
| #if ! defined HCF_HSI_VAR_4 |
| #define HCF_HSI_VAR_4 //Hermes-II all types (for the time being!) |
| #endif // HCF_HSI_VAR_4 |
| |
| #if ! defined HCF_APF_VAR_2 |
| #define HCF_APF_VAR_2 |
| #endif // HCF_APF_VAR_2 |
| |
| #if ! defined HCF_STA_VAR_2 |
| #define HCF_STA_VAR_2 |
| #endif // HCF_STA_VAR_2 |
| |
| #endif // HCF_TYPE_HII5 |
| |
| #if ! defined HCF_PRI_VAR_3 |
| #define HCF_PRI_VAR_3 |
| #endif // HCF_PRI_VAR_3 |
| |
| #if defined HCF_HSI_VAR_1 || defined HCF_HSI_VAR_2 || defined HCF_HSI_VAR_3 |
| err: HSI variants 1, 2 and 3 correspond with H-I only; |
| #endif // HCF_HSI_VAR_1, HCF_HSI_VAR_2, HCF_HSI_VAR_3 |
| |
| #if defined HCF_PRI_VAR_1 || defined HCF_PRI_VAR_2 |
| err: primary variants 1 and 2 correspond with H-I only; |
| #endif // HCF_PRI_VAR_1 / HCF_PRI_VAR_2 |
| |
| |
| /************************************************************************************************************/ |
| /******************************************* . . . . . . . . . *********************************************/ |
| /************************************************************************************************************/ |
| |
| |
| /* The BASED customization macro is used to resolves the SS!=DS conflict for the Interrupt Service logic in |
| * DOS Drivers. Due to the cumbersomeness of mixing C and assembler local BASED variables still end up in the |
| * wrong segment. The workaround is that the HCF uses only global BASED variables or IFB-based variables. |
| * The "BASED" construction (supposedly) only amounts to something in the small memory model. |
| * |
| * Note that the whole BASED rigmarole is needlessly complicated because both the Microsoft Compiler and |
| * Linker are unnecessary restrictive in what far pointer manipulation they allow |
| */ |
| |
| #if ! defined BASED |
| #define BASED |
| #endif // BASED |
| |
| #if ! defined EXTERN_C |
| #ifdef __cplusplus |
| #define EXTERN_C extern "C" |
| #else |
| #define EXTERN_C |
| #endif // __cplusplus |
| #endif // EXTERN_C |
| |
| #if ! defined NULL |
| #define NULL ((void *) 0) |
| #endif // NULL |
| |
| #if ! defined TEXT |
| #define TEXT(x) x |
| #endif // TEXT |
| |
| /************************************************************************************************************/ |
| /*********************** C O N F L I C T D E T E C T I O N & R E S O L U T I O N ************************/ |
| /************************************************************************************************************/ |
| #if HCF_ALIGN != 1 && HCF_ALIGN != 2 && HCF_ALIGN != 4 && HCF_ALIGN != 8 |
| err: invalid value for HCF_ALIGN; |
| #endif // HCF_ALIGN |
| |
| #if (HCF_ASSERT) & ~( HCF_ASSERT_PRINTF | HCF_ASSERT_SW_SUP | HCF_ASSERT_MB | HCF_ASSERT_RT_MSF_RTN | \ |
| HCF_ASSERT_LNK_MSF_RTN ) |
| err: invalid value for HCF_ASSERT; |
| #endif // HCF_ASSERT |
| |
| #if (HCF_ASSERT) & HCF_ASSERT_MB && ! ( (HCF_EXT) & HCF_EXT_MB ) //detect potential conflict |
| err: these macros are not used consistently; |
| #endif // HCF_ASSERT_MB / HCF_EXT_MB |
| |
| #if HCF_BIG_ENDIAN != 0 && HCF_BIG_ENDIAN != 1 |
| err: invalid value for HCF_BIG_ENDIAN; |
| #endif // HCF_BIG_ENDIAN |
| |
| #if HCF_DMA != 0 && HCF_DMA != 1 |
| err: invalid value for HCF_DMA; |
| #endif // HCF_DMA |
| |
| #if (HCF_ENCAP) & ~( HCF_ENC | HCF_ENC_SUP ) |
| err: invalid value for HCF_ENCAP; |
| #endif // HCF_ENCAP |
| |
| #if (HCF_EXT) & ~( HCF_EXT_INFO_LOG | HCF_EXT_INT_TX_EX | HCF_EXT_TALLIES_FW | HCF_EXT_TALLIES_HCF | \ |
| HCF_EXT_NIC_ACCESS | HCF_EXT_MB | HCF_EXT_INT_TICK | \ |
| HCF_EXT_IFB_STRCT | HCF_EXT_DESC_STRCT | HCF_EXT_TX_CONT ) |
| err: invalid value for HCF_EXT; |
| #endif // HCF_EXT |
| |
| #if HCF_INT_ON != 0 && HCF_INT_ON != 1 |
| err: invalid value for HCF_INT_ON; |
| #endif // HCF_INT_ON |
| |
| #if (HCF_IO) & ~( HCF_IO_MEM | HCF_IO_32BITS ) |
| err: invalid value for HCF_IO; |
| #endif // HCF_IO |
| |
| #if HCF_LEGACY != 0 && HCF_LEGACY != 1 |
| err: invalid value for HCF_LEGACY; |
| #endif // HCF_LEGACY |
| |
| #if HCF_MAX_LTV < 16 || HCF_MAX_LTV > 2304 |
| err: invalid value for HCF_MAX_LTV; |
| #endif // HCF_MAX_LTV |
| |
| #if HCF_PROT_TIME != 0 && ( HCF_PROT_TIME < 19 || 256 < HCF_PROT_TIME ) |
| err: below minimum .08 second required by Hermes or possibly above hcf_32 capacity; |
| #endif // HCF_PROT_TIME |
| |
| #if (HCF_SLEEP) & ~( HCF_CDS | HCF_DDS ) |
| err: invalid value for HCF_SLEEP; |
| #endif // HCF_SLEEP |
| |
| #if (HCF_SLEEP) && ! (HCF_INT_ON) |
| err: these macros are not used consistently; |
| #endif // HCF_SLEEP / HCF_INT_ON |
| |
| #if (HCF_SLEEP) && ! ( (HCF_EXT) & HCF_EXT_INT_TICK ) |
| //;? err: these macros are not used consistently; |
| #endif // HCF_SLEEP / HCF_EXT_INT_TICK |
| |
| #if (HCF_TALLIES) & ~( HCF_TALLIES_HCF | HCF_TALLIES_NIC | HCF_TALLIES_RESET ) || \ |
| (HCF_TALLIES) == HCF_TALLIES_RESET |
| err: invalid value for HCF_TALLIES; |
| #endif // HCF_TALLIES |
| |
| #if (HCF_TYPE) & ~(HCF_TYPE_WPA | HCF_TYPE_USB | HCF_TYPE_PRELOADED | HCF_TYPE_HII5 | HCF_TYPE_WARP | \ |
| HCF_TYPE_CCX /* | HCF_TYPE_TX_DELAY */ ) |
| err: invalid value for HCF_TYPE; |
| #endif //HCF_TYPE |
| |
| #if (HCF_TYPE) & HCF_TYPE_WARP && (HCF_TYPE) & HCF_TYPE_WPA |
| err: at most 1 of these macros should be defined; |
| #endif //HCF_TYPE_WARP / HCF_TYPE_WPA |
| |
| #endif //HCFCFG_H |
| |
