| /* |
| * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc. |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * File: card.c |
| * Purpose: Provide functions to setup NIC operation mode |
| * Functions: |
| * s_vSafeResetTx - Rest Tx |
| * CARDvSetRSPINF - Set RSPINF |
| * vUpdateIFS - Update slotTime,SIFS,DIFS, and EIFS |
| * CARDvUpdateBasicTopRate - Update BasicTopRate |
| * CARDbAddBasicRate - Add to BasicRateSet |
| * CARDbSetBasicRate - Set Basic Tx Rate |
| * CARDbIsOFDMinBasicRate - Check if any OFDM rate is in BasicRateSet |
| * CARDvSetLoopbackMode - Set Loopback mode |
| * CARDbSoftwareReset - Sortware reset NIC |
| * CARDqGetTSFOffset - Caculate TSFOffset |
| * CARDbGetCurrentTSF - Read Current NIC TSF counter |
| * CARDqGetNextTBTT - Caculate Next Beacon TSF counter |
| * CARDvSetFirstNextTBTT - Set NIC Beacon time |
| * CARDvUpdateNextTBTT - Sync. NIC Beacon time |
| * CARDbRadioPowerOff - Turn Off NIC Radio Power |
| * CARDbRadioPowerOn - Turn On NIC Radio Power |
| * CARDbSetWEPMode - Set NIC Wep mode |
| * CARDbSetTxPower - Set NIC tx power |
| * |
| * Revision History: |
| * 06-10-2003 Bryan YC Fan: Re-write codes to support VT3253 spec. |
| * 08-26-2003 Kyle Hsu: Modify the defination type of dwIoBase. |
| * 09-01-2003 Bryan YC Fan: Add vUpdateIFS(). |
| * |
| */ |
| |
| #include "tmacro.h" |
| #include "card.h" |
| #include "baseband.h" |
| #include "mac.h" |
| #include "desc.h" |
| #include "rf.h" |
| #include "power.h" |
| #include "key.h" |
| #include "rc4.h" |
| #include "country.h" |
| #include "datarate.h" |
| #include "rndis.h" |
| #include "control.h" |
| |
| /*--------------------- Static Definitions -------------------------*/ |
| |
| //static int msglevel =MSG_LEVEL_DEBUG; |
| static int msglevel =MSG_LEVEL_INFO; |
| |
| |
| /*--------------------- Static Definitions -------------------------*/ |
| #define CB_TXPOWER_LEVEL 6 |
| |
| /*--------------------- Static Classes ----------------------------*/ |
| |
| /*--------------------- Static Variables --------------------------*/ |
| //const WORD cwRXBCNTSFOff[MAX_RATE] = |
| //{17, 34, 96, 192, 34, 23, 17, 11, 8, 5, 4, 3}; |
| |
| const WORD cwRXBCNTSFOff[MAX_RATE] = |
| {192, 96, 34, 17, 34, 23, 17, 11, 8, 5, 4, 3}; |
| |
| /*--------------------- Static Functions --------------------------*/ |
| |
| /*--------------------- Export Variables --------------------------*/ |
| |
| /*--------------------- Export Functions --------------------------*/ |
| /* |
| * Description: Set NIC media channel |
| * |
| * Parameters: |
| * In: |
| * pDevice - The adapter to be set |
| * uConnectionChannel - Channel to be set |
| * Out: |
| * none |
| * |
| * Return Value: TRUE if succeeded; FALSE if failed. |
| * |
| */ |
| BOOL CARDbSetMediaChannel(void *pDeviceHandler, unsigned int uConnectionChannel) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| BOOL bResult = TRUE; |
| |
| |
| if (pDevice->byBBType == BB_TYPE_11A) { // 15 ~ 38 |
| if ((uConnectionChannel < (CB_MAX_CHANNEL_24G+1)) || (uConnectionChannel > CB_MAX_CHANNEL)) |
| uConnectionChannel = (CB_MAX_CHANNEL_24G+1); |
| } else { |
| if ((uConnectionChannel > CB_MAX_CHANNEL_24G) || (uConnectionChannel == 0)) // 1 ~ 14 |
| uConnectionChannel = 1; |
| } |
| |
| // clear NAV |
| MACvRegBitsOn(pDevice, MAC_REG_MACCR, MACCR_CLRNAV); |
| |
| // Set Channel[7] = 0 to tell H/W channel is changing now. |
| MACvRegBitsOff(pDevice, MAC_REG_CHANNEL, 0x80); |
| |
| //if (pMgmt->uCurrChannel == uConnectionChannel) |
| // return bResult; |
| |
| CONTROLnsRequestOut(pDevice, |
| MESSAGE_TYPE_SELECT_CHANNLE, |
| (WORD) uConnectionChannel, |
| 0, |
| 0, |
| NULL |
| ); |
| |
| //{{ RobertYu: 20041202 |
| //// TX_PE will reserve 3 us for MAX2829 A mode only, it is for better TX throughput |
| |
| if (pDevice->byBBType == BB_TYPE_11A) { |
| pDevice->byCurPwr = 0xFF; |
| RFbRawSetPower(pDevice, pDevice->abyOFDMAPwrTbl[uConnectionChannel-15], RATE_54M); |
| } else if (pDevice->byBBType == BB_TYPE_11G) { |
| pDevice->byCurPwr = 0xFF; |
| RFbRawSetPower(pDevice, pDevice->abyOFDMPwrTbl[uConnectionChannel-1], RATE_54M); |
| } else { |
| pDevice->byCurPwr = 0xFF; |
| RFbRawSetPower(pDevice, pDevice->abyCCKPwrTbl[uConnectionChannel-1], RATE_1M); |
| } |
| ControlvWriteByte(pDevice,MESSAGE_REQUEST_MACREG,MAC_REG_CHANNEL,(BYTE)(uConnectionChannel|0x80)); |
| return(bResult); |
| } |
| |
| /* |
| * Description: Get CCK mode basic rate |
| * |
| * Parameters: |
| * In: |
| * pDevice - The adapter to be set |
| * wRateIdx - Receiving data rate |
| * Out: |
| * none |
| * |
| * Return Value: response Control frame rate |
| * |
| */ |
| static WORD swGetCCKControlRate(void *pDeviceHandler, WORD wRateIdx) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| unsigned int ui = (unsigned int)wRateIdx; |
| while (ui > RATE_1M) { |
| if (pDevice->wBasicRate & ((WORD)1 << ui)) { |
| return (WORD)ui; |
| } |
| ui --; |
| } |
| return (WORD)RATE_1M; |
| } |
| |
| /* |
| * Description: Get OFDM mode basic rate |
| * |
| * Parameters: |
| * In: |
| * pDevice - The adapter to be set |
| * wRateIdx - Receiving data rate |
| * Out: |
| * none |
| * |
| * Return Value: response Control frame rate |
| * |
| */ |
| static WORD swGetOFDMControlRate(void *pDeviceHandler, WORD wRateIdx) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| unsigned int ui = (unsigned int)wRateIdx; |
| |
| DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"BASIC RATE: %X\n", pDevice->wBasicRate); |
| |
| if (!CARDbIsOFDMinBasicRate(pDevice)) { |
| DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"swGetOFDMControlRate:(NO OFDM) %d\n", wRateIdx); |
| if (wRateIdx > RATE_24M) |
| wRateIdx = RATE_24M; |
| return wRateIdx; |
| } |
| while (ui > RATE_11M) { |
| if (pDevice->wBasicRate & ((WORD)1 << ui)) { |
| DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"swGetOFDMControlRate : %d\n", ui); |
| return (WORD)ui; |
| } |
| ui --; |
| } |
| DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"swGetOFDMControlRate: 6M\n"); |
| return (WORD)RATE_24M; |
| } |
| |
| /* |
| * Description: Caculate TxRate and RsvTime fields for RSPINF in OFDM mode. |
| * |
| * Parameters: |
| * In: |
| * wRate - Tx Rate |
| * byPktType - Tx Packet type |
| * Out: |
| * pbyTxRate - pointer to RSPINF TxRate field |
| * pbyRsvTime - pointer to RSPINF RsvTime field |
| * |
| * Return Value: none |
| * |
| */ |
| void |
| CARDvCaculateOFDMRParameter ( |
| WORD wRate, |
| BYTE byBBType, |
| PBYTE pbyTxRate, |
| PBYTE pbyRsvTime |
| ) |
| { |
| switch (wRate) { |
| case RATE_6M : |
| if (byBBType == BB_TYPE_11A) {//5GHZ |
| *pbyTxRate = 0x9B; |
| *pbyRsvTime = 24; |
| } |
| else { |
| *pbyTxRate = 0x8B; |
| *pbyRsvTime = 30; |
| } |
| break; |
| |
| case RATE_9M : |
| if (byBBType == BB_TYPE_11A) {//5GHZ |
| *pbyTxRate = 0x9F; |
| *pbyRsvTime = 16; |
| } |
| else { |
| *pbyTxRate = 0x8F; |
| *pbyRsvTime = 22; |
| } |
| break; |
| |
| case RATE_12M : |
| if (byBBType == BB_TYPE_11A) {//5GHZ |
| *pbyTxRate = 0x9A; |
| *pbyRsvTime = 12; |
| } |
| else { |
| *pbyTxRate = 0x8A; |
| *pbyRsvTime = 18; |
| } |
| break; |
| |
| case RATE_18M : |
| if (byBBType == BB_TYPE_11A) {//5GHZ |
| *pbyTxRate = 0x9E; |
| *pbyRsvTime = 8; |
| } |
| else { |
| *pbyTxRate = 0x8E; |
| *pbyRsvTime = 14; |
| } |
| break; |
| |
| case RATE_36M : |
| if (byBBType == BB_TYPE_11A) {//5GHZ |
| *pbyTxRate = 0x9D; |
| *pbyRsvTime = 4; |
| } |
| else { |
| *pbyTxRate = 0x8D; |
| *pbyRsvTime = 10; |
| } |
| break; |
| |
| case RATE_48M : |
| if (byBBType == BB_TYPE_11A) {//5GHZ |
| *pbyTxRate = 0x98; |
| *pbyRsvTime = 4; |
| } |
| else { |
| *pbyTxRate = 0x88; |
| *pbyRsvTime = 10; |
| } |
| break; |
| |
| case RATE_54M : |
| if (byBBType == BB_TYPE_11A) {//5GHZ |
| *pbyTxRate = 0x9C; |
| *pbyRsvTime = 4; |
| } |
| else { |
| *pbyTxRate = 0x8C; |
| *pbyRsvTime = 10; |
| } |
| break; |
| |
| case RATE_24M : |
| default : |
| if (byBBType == BB_TYPE_11A) {//5GHZ |
| *pbyTxRate = 0x99; |
| *pbyRsvTime = 8; |
| } |
| else { |
| *pbyTxRate = 0x89; |
| *pbyRsvTime = 14; |
| } |
| break; |
| } |
| } |
| |
| /* |
| * Description: Set RSPINF |
| * |
| * Parameters: |
| * In: |
| * pDevice - The adapter to be set |
| * Out: |
| * none |
| * |
| * Return Value: None. |
| * |
| */ |
| void CARDvSetRSPINF(void *pDeviceHandler, BYTE byBBType) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| BYTE abyServ[4] = {0,0,0,0}; // For CCK |
| BYTE abySignal[4] = {0,0,0,0}; |
| WORD awLen[4] = {0,0,0,0}; |
| BYTE abyTxRate[9] = {0,0,0,0,0,0,0,0,0}; // For OFDM |
| BYTE abyRsvTime[9] = {0,0,0,0,0,0,0,0,0}; |
| BYTE abyData[34]; |
| int i; |
| |
| //RSPINF_b_1 |
| BBvCaculateParameter(pDevice, |
| 14, |
| swGetCCKControlRate(pDevice, RATE_1M), |
| PK_TYPE_11B, |
| &awLen[0], |
| &abyServ[0], |
| &abySignal[0] |
| ); |
| |
| ///RSPINF_b_2 |
| BBvCaculateParameter(pDevice, |
| 14, |
| swGetCCKControlRate(pDevice, RATE_2M), |
| PK_TYPE_11B, |
| &awLen[1], |
| &abyServ[1], |
| &abySignal[1] |
| ); |
| |
| //RSPINF_b_5 |
| BBvCaculateParameter(pDevice, |
| 14, |
| swGetCCKControlRate(pDevice, RATE_5M), |
| PK_TYPE_11B, |
| &awLen[2], |
| &abyServ[2], |
| &abySignal[2] |
| ); |
| |
| //RSPINF_b_11 |
| BBvCaculateParameter(pDevice, |
| 14, |
| swGetCCKControlRate(pDevice, RATE_11M), |
| PK_TYPE_11B, |
| &awLen[3], |
| &abyServ[3], |
| &abySignal[3] |
| ); |
| |
| //RSPINF_a_6 |
| CARDvCaculateOFDMRParameter (RATE_6M, |
| byBBType, |
| &abyTxRate[0], |
| &abyRsvTime[0]); |
| |
| //RSPINF_a_9 |
| CARDvCaculateOFDMRParameter (RATE_9M, |
| byBBType, |
| &abyTxRate[1], |
| &abyRsvTime[1]); |
| |
| //RSPINF_a_12 |
| CARDvCaculateOFDMRParameter (RATE_12M, |
| byBBType, |
| &abyTxRate[2], |
| &abyRsvTime[2]); |
| |
| //RSPINF_a_18 |
| CARDvCaculateOFDMRParameter (RATE_18M, |
| byBBType, |
| &abyTxRate[3], |
| &abyRsvTime[3]); |
| |
| //RSPINF_a_24 |
| CARDvCaculateOFDMRParameter (RATE_24M, |
| byBBType, |
| &abyTxRate[4], |
| &abyRsvTime[4]); |
| |
| //RSPINF_a_36 |
| CARDvCaculateOFDMRParameter (swGetOFDMControlRate(pDevice, RATE_36M), |
| byBBType, |
| &abyTxRate[5], |
| &abyRsvTime[5]); |
| |
| //RSPINF_a_48 |
| CARDvCaculateOFDMRParameter (swGetOFDMControlRate(pDevice, RATE_48M), |
| byBBType, |
| &abyTxRate[6], |
| &abyRsvTime[6]); |
| |
| //RSPINF_a_54 |
| CARDvCaculateOFDMRParameter (swGetOFDMControlRate(pDevice, RATE_54M), |
| byBBType, |
| &abyTxRate[7], |
| &abyRsvTime[7]); |
| |
| //RSPINF_a_72 |
| CARDvCaculateOFDMRParameter (swGetOFDMControlRate(pDevice, RATE_54M), |
| byBBType, |
| &abyTxRate[8], |
| &abyRsvTime[8]); |
| |
| abyData[0] = (BYTE)(awLen[0]&0xFF); |
| abyData[1] = (BYTE)(awLen[0]>>8); |
| abyData[2] = abySignal[0]; |
| abyData[3] = abyServ[0]; |
| |
| abyData[4] = (BYTE)(awLen[1]&0xFF); |
| abyData[5] = (BYTE)(awLen[1]>>8); |
| abyData[6] = abySignal[1]; |
| abyData[7] = abyServ[1]; |
| |
| abyData[8] = (BYTE)(awLen[2]&0xFF); |
| abyData[9] = (BYTE)(awLen[2]>>8); |
| abyData[10] = abySignal[2]; |
| abyData[11] = abyServ[2]; |
| |
| abyData[12] = (BYTE)(awLen[3]&0xFF); |
| abyData[13] = (BYTE)(awLen[3]>>8); |
| abyData[14] = abySignal[3]; |
| abyData[15] = abyServ[3]; |
| |
| for (i = 0; i < 9; i++) { |
| abyData[16+i*2] = abyTxRate[i]; |
| abyData[16+i*2+1] = abyRsvTime[i]; |
| } |
| |
| CONTROLnsRequestOut(pDevice, |
| MESSAGE_TYPE_WRITE, |
| MAC_REG_RSPINF_B_1, |
| MESSAGE_REQUEST_MACREG, |
| 34, |
| &abyData[0]); |
| |
| } |
| |
| /* |
| * Description: Update IFS |
| * |
| * Parameters: |
| * In: |
| * pDevice - The adapter to be set |
| * Out: |
| * none |
| * |
| * Return Value: None. |
| * |
| */ |
| void vUpdateIFS(void *pDeviceHandler) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| //Set SIFS, DIFS, EIFS, SlotTime, CwMin |
| BYTE byMaxMin = 0; |
| BYTE byData[4]; |
| |
| if (pDevice->byPacketType==PK_TYPE_11A) {//0000 0000 0000 0000,11a |
| pDevice->uSlot = C_SLOT_SHORT; |
| pDevice->uSIFS = C_SIFS_A; |
| pDevice->uDIFS = C_SIFS_A + 2*C_SLOT_SHORT; |
| pDevice->uCwMin = C_CWMIN_A; |
| byMaxMin = 4; |
| } |
| else if (pDevice->byPacketType==PK_TYPE_11B) {//0000 0001 0000 0000,11b |
| pDevice->uSlot = C_SLOT_LONG; |
| pDevice->uSIFS = C_SIFS_BG; |
| pDevice->uDIFS = C_SIFS_BG + 2*C_SLOT_LONG; |
| pDevice->uCwMin = C_CWMIN_B; |
| byMaxMin = 5; |
| } |
| else {// PK_TYPE_11GA & PK_TYPE_11GB |
| BYTE byRate = 0; |
| BOOL bOFDMRate = FALSE; |
| unsigned int ii = 0; |
| PWLAN_IE_SUPP_RATES pItemRates = NULL; |
| |
| pDevice->uSIFS = C_SIFS_BG; |
| if (pDevice->bShortSlotTime) { |
| pDevice->uSlot = C_SLOT_SHORT; |
| } else { |
| pDevice->uSlot = C_SLOT_LONG; |
| } |
| pDevice->uDIFS = C_SIFS_BG + 2*pDevice->uSlot; |
| |
| pItemRates = (PWLAN_IE_SUPP_RATES)pDevice->sMgmtObj.abyCurrSuppRates; |
| for (ii = 0; ii < pItemRates->len; ii++) { |
| byRate = (BYTE)(pItemRates->abyRates[ii]&0x7F); |
| if (RATEwGetRateIdx(byRate) > RATE_11M) { |
| bOFDMRate = TRUE; |
| break; |
| } |
| } |
| if (bOFDMRate == FALSE) { |
| pItemRates = (PWLAN_IE_SUPP_RATES)pDevice->sMgmtObj.abyCurrExtSuppRates; |
| for (ii = 0; ii < pItemRates->len; ii++) { |
| byRate = (BYTE)(pItemRates->abyRates[ii]&0x7F); |
| if (RATEwGetRateIdx(byRate) > RATE_11M) { |
| bOFDMRate = TRUE; |
| break; |
| } |
| } |
| } |
| if (bOFDMRate == TRUE) { |
| pDevice->uCwMin = C_CWMIN_A; |
| byMaxMin = 4; |
| } else { |
| pDevice->uCwMin = C_CWMIN_B; |
| byMaxMin = 5; |
| } |
| } |
| |
| pDevice->uCwMax = C_CWMAX; |
| pDevice->uEIFS = C_EIFS; |
| |
| byData[0] = (BYTE)pDevice->uSIFS; |
| byData[1] = (BYTE)pDevice->uDIFS; |
| byData[2] = (BYTE)pDevice->uEIFS; |
| byData[3] = (BYTE)pDevice->uSlot; |
| CONTROLnsRequestOut(pDevice, |
| MESSAGE_TYPE_WRITE, |
| MAC_REG_SIFS, |
| MESSAGE_REQUEST_MACREG, |
| 4, |
| &byData[0]); |
| |
| byMaxMin |= 0xA0;//1010 1111,C_CWMAX = 1023 |
| CONTROLnsRequestOut(pDevice, |
| MESSAGE_TYPE_WRITE, |
| MAC_REG_CWMAXMIN0, |
| MESSAGE_REQUEST_MACREG, |
| 1, |
| &byMaxMin); |
| } |
| |
| void CARDvUpdateBasicTopRate(void *pDeviceHandler) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| BYTE byTopOFDM = RATE_24M, byTopCCK = RATE_1M; |
| BYTE ii; |
| |
| //Determines the highest basic rate. |
| for (ii = RATE_54M; ii >= RATE_6M; ii --) { |
| if ( (pDevice->wBasicRate) & ((WORD)(1<<ii)) ) { |
| byTopOFDM = ii; |
| break; |
| } |
| } |
| pDevice->byTopOFDMBasicRate = byTopOFDM; |
| |
| for (ii = RATE_11M;; ii --) { |
| if ( (pDevice->wBasicRate) & ((WORD)(1<<ii)) ) { |
| byTopCCK = ii; |
| break; |
| } |
| if (ii == RATE_1M) |
| break; |
| } |
| pDevice->byTopCCKBasicRate = byTopCCK; |
| } |
| |
| /* |
| * Description: Set NIC Tx Basic Rate |
| * |
| * Parameters: |
| * In: |
| * pDevice - The adapter to be set |
| * wBasicRate - Basic Rate to be set |
| * Out: |
| * none |
| * |
| * Return Value: TRUE if succeeded; FALSE if failed. |
| * |
| */ |
| BOOL CARDbAddBasicRate(void *pDeviceHandler, WORD wRateIdx) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| WORD wRate = (WORD)(1<<wRateIdx); |
| |
| pDevice->wBasicRate |= wRate; |
| |
| //Determines the highest basic rate. |
| CARDvUpdateBasicTopRate(pDevice); |
| |
| return(TRUE); |
| } |
| |
| BOOL CARDbIsOFDMinBasicRate(void *pDeviceHandler) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| int ii; |
| |
| for (ii = RATE_54M; ii >= RATE_6M; ii --) { |
| if ((pDevice->wBasicRate) & ((WORD)(1<<ii))) |
| return TRUE; |
| } |
| return FALSE; |
| } |
| |
| BYTE CARDbyGetPktType(void *pDeviceHandler) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| |
| if (pDevice->byBBType == BB_TYPE_11A || pDevice->byBBType == BB_TYPE_11B) { |
| return (BYTE)pDevice->byBBType; |
| } |
| else if (CARDbIsOFDMinBasicRate(pDevice)) { |
| return PK_TYPE_11GA; |
| } |
| else { |
| return PK_TYPE_11GB; |
| } |
| } |
| |
| |
| /* |
| * Description: Caculate TSF offset of two TSF input |
| * Get TSF Offset from RxBCN's TSF and local TSF |
| * |
| * Parameters: |
| * In: |
| * pDevice - The adapter to be sync. |
| * qwTSF1 - Rx BCN's TSF |
| * qwTSF2 - Local TSF |
| * Out: |
| * none |
| * |
| * Return Value: TSF Offset value |
| * |
| */ |
| QWORD CARDqGetTSFOffset (BYTE byRxRate, QWORD qwTSF1, QWORD qwTSF2) |
| { |
| QWORD qwTSFOffset; |
| WORD wRxBcnTSFOffst = 0; |
| |
| HIDWORD(qwTSFOffset) = 0; |
| LODWORD(qwTSFOffset) = 0; |
| |
| wRxBcnTSFOffst = cwRXBCNTSFOff[byRxRate%MAX_RATE]; |
| (qwTSF2).u.dwLowDword += (DWORD)(wRxBcnTSFOffst); |
| if ((qwTSF2).u.dwLowDword < (DWORD)(wRxBcnTSFOffst)) { |
| (qwTSF2).u.dwHighDword++; |
| } |
| LODWORD(qwTSFOffset) = LODWORD(qwTSF1) - LODWORD(qwTSF2); |
| if (LODWORD(qwTSF1) < LODWORD(qwTSF2)) { |
| // if borrow needed |
| HIDWORD(qwTSFOffset) = HIDWORD(qwTSF1) - HIDWORD(qwTSF2) - 1 ; |
| } |
| else { |
| HIDWORD(qwTSFOffset) = HIDWORD(qwTSF1) - HIDWORD(qwTSF2); |
| }; |
| return (qwTSFOffset); |
| } |
| |
| |
| |
| /* |
| * Description: Sync. TSF counter to BSS |
| * Get TSF offset and write to HW |
| * |
| * Parameters: |
| * In: |
| * pDevice - The adapter to be sync. |
| * qwBSSTimestamp - Rx BCN's TSF |
| * qwLocalTSF - Local TSF |
| * Out: |
| * none |
| * |
| * Return Value: none |
| * |
| */ |
| void CARDvAdjustTSF(void *pDeviceHandler, BYTE byRxRate, |
| QWORD qwBSSTimestamp, QWORD qwLocalTSF) |
| { |
| |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| QWORD qwTSFOffset; |
| DWORD dwTSFOffset1,dwTSFOffset2; |
| BYTE pbyData[8]; |
| |
| HIDWORD(qwTSFOffset) = 0; |
| LODWORD(qwTSFOffset) = 0; |
| |
| qwTSFOffset = CARDqGetTSFOffset(byRxRate, qwBSSTimestamp, qwLocalTSF); |
| // adjust TSF |
| // HW's TSF add TSF Offset reg |
| dwTSFOffset1 = LODWORD(qwTSFOffset); |
| dwTSFOffset2 = HIDWORD(qwTSFOffset); |
| |
| |
| pbyData[0] = (BYTE)dwTSFOffset1; |
| pbyData[1] = (BYTE)(dwTSFOffset1>>8); |
| pbyData[2] = (BYTE)(dwTSFOffset1>>16); |
| pbyData[3] = (BYTE)(dwTSFOffset1>>24); |
| pbyData[4] = (BYTE)dwTSFOffset2; |
| pbyData[5] = (BYTE)(dwTSFOffset2>>8); |
| pbyData[6] = (BYTE)(dwTSFOffset2>>16); |
| pbyData[7] = (BYTE)(dwTSFOffset2>>24); |
| |
| CONTROLnsRequestOut(pDevice, |
| MESSAGE_TYPE_SET_TSFTBTT, |
| MESSAGE_REQUEST_TSF, |
| 0, |
| 8, |
| pbyData |
| ); |
| |
| } |
| /* |
| * Description: Read NIC TSF counter |
| * Get local TSF counter |
| * |
| * Parameters: |
| * In: |
| * pDevice - The adapter to be read |
| * Out: |
| * qwCurrTSF - Current TSF counter |
| * |
| * Return Value: TRUE if success; otherwise FALSE |
| * |
| */ |
| BOOL CARDbGetCurrentTSF(void *pDeviceHandler, PQWORD pqwCurrTSF) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| |
| LODWORD(*pqwCurrTSF) = LODWORD(pDevice->qwCurrTSF); |
| HIDWORD(*pqwCurrTSF) = HIDWORD(pDevice->qwCurrTSF); |
| |
| return(TRUE); |
| } |
| |
| |
| /* |
| * Description: Clear NIC TSF counter |
| * Clear local TSF counter |
| * |
| * Parameters: |
| * In: |
| * pDevice - The adapter to be read |
| * |
| * Return Value: TRUE if success; otherwise FALSE |
| * |
| */ |
| BOOL CARDbClearCurrentTSF(void *pDeviceHandler) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| |
| MACvRegBitsOn(pDevice,MAC_REG_TFTCTL,TFTCTL_TSFCNTRST); |
| |
| LODWORD(pDevice->qwCurrTSF) = 0; |
| HIDWORD(pDevice->qwCurrTSF) = 0; |
| |
| return(TRUE); |
| } |
| |
| /* |
| * Description: Read NIC TSF counter |
| * Get NEXTTBTT from adjusted TSF and Beacon Interval |
| * |
| * Parameters: |
| * In: |
| * qwTSF - Current TSF counter |
| * wbeaconInterval - Beacon Interval |
| * Out: |
| * qwCurrTSF - Current TSF counter |
| * |
| * Return Value: TSF value of next Beacon |
| * |
| */ |
| QWORD CARDqGetNextTBTT (QWORD qwTSF, WORD wBeaconInterval) |
| { |
| |
| unsigned int uLowNextTBTT; |
| unsigned int uHighRemain, uLowRemain; |
| unsigned int uBeaconInterval; |
| |
| uBeaconInterval = wBeaconInterval * 1024; |
| // Next TBTT = ((local_current_TSF / beacon_interval) + 1 ) * beacon_interval |
| uLowNextTBTT = (LODWORD(qwTSF) >> 10) << 10; |
| uLowRemain = (uLowNextTBTT) % uBeaconInterval; |
| uHighRemain = ((0x80000000 % uBeaconInterval)* 2 * HIDWORD(qwTSF)) |
| % uBeaconInterval; |
| uLowRemain = (uHighRemain + uLowRemain) % uBeaconInterval; |
| uLowRemain = uBeaconInterval - uLowRemain; |
| |
| // check if carry when add one beacon interval |
| if ((~uLowNextTBTT) < uLowRemain) |
| HIDWORD(qwTSF) ++ ; |
| |
| LODWORD(qwTSF) = uLowNextTBTT + uLowRemain; |
| |
| return (qwTSF); |
| } |
| |
| |
| /* |
| * Description: Set NIC TSF counter for first Beacon time |
| * Get NEXTTBTT from adjusted TSF and Beacon Interval |
| * |
| * Parameters: |
| * In: |
| * dwIoBase - IO Base |
| * wBeaconInterval - Beacon Interval |
| * Out: |
| * none |
| * |
| * Return Value: none |
| * |
| */ |
| void CARDvSetFirstNextTBTT(void *pDeviceHandler, WORD wBeaconInterval) |
| { |
| |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| QWORD qwNextTBTT; |
| DWORD dwLoTBTT,dwHiTBTT; |
| BYTE pbyData[8]; |
| |
| HIDWORD(qwNextTBTT) = 0; |
| LODWORD(qwNextTBTT) = 0; |
| CARDbClearCurrentTSF(pDevice); |
| //CARDbGetCurrentTSF(pDevice, &qwNextTBTT); //Get Local TSF counter |
| qwNextTBTT = CARDqGetNextTBTT(qwNextTBTT, wBeaconInterval); |
| // Set NextTBTT |
| |
| dwLoTBTT = LODWORD(qwNextTBTT); |
| dwHiTBTT = HIDWORD(qwNextTBTT); |
| |
| pbyData[0] = (BYTE)dwLoTBTT; |
| pbyData[1] = (BYTE)(dwLoTBTT>>8); |
| pbyData[2] = (BYTE)(dwLoTBTT>>16); |
| pbyData[3] = (BYTE)(dwLoTBTT>>24); |
| pbyData[4] = (BYTE)dwHiTBTT; |
| pbyData[5] = (BYTE)(dwHiTBTT>>8); |
| pbyData[6] = (BYTE)(dwHiTBTT>>16); |
| pbyData[7] = (BYTE)(dwHiTBTT>>24); |
| |
| CONTROLnsRequestOut(pDevice, |
| MESSAGE_TYPE_SET_TSFTBTT, |
| MESSAGE_REQUEST_TBTT, |
| 0, |
| 8, |
| pbyData |
| ); |
| |
| return; |
| } |
| |
| |
| /* |
| * Description: Sync NIC TSF counter for Beacon time |
| * Get NEXTTBTT and write to HW |
| * |
| * Parameters: |
| * In: |
| * pDevice - The adapter to be set |
| * qwTSF - Current TSF counter |
| * wBeaconInterval - Beacon Interval |
| * Out: |
| * none |
| * |
| * Return Value: none |
| * |
| */ |
| void CARDvUpdateNextTBTT(void *pDeviceHandler, QWORD qwTSF, |
| WORD wBeaconInterval) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| DWORD dwLoTBTT,dwHiTBTT; |
| BYTE pbyData[8]; |
| |
| qwTSF = CARDqGetNextTBTT(qwTSF, wBeaconInterval); |
| |
| // Set NextTBTT |
| dwLoTBTT = LODWORD(qwTSF); |
| dwHiTBTT = HIDWORD(qwTSF); |
| |
| pbyData[0] = (BYTE)dwLoTBTT; |
| pbyData[1] = (BYTE)(dwLoTBTT>>8); |
| pbyData[2] = (BYTE)(dwLoTBTT>>16); |
| pbyData[3] = (BYTE)(dwLoTBTT>>24); |
| pbyData[4] = (BYTE)dwHiTBTT; |
| pbyData[5] = (BYTE)(dwHiTBTT>>8); |
| pbyData[6] = (BYTE)(dwHiTBTT>>16); |
| pbyData[7] = (BYTE)(dwHiTBTT>>24); |
| |
| CONTROLnsRequestOut(pDevice, |
| MESSAGE_TYPE_SET_TSFTBTT, |
| MESSAGE_REQUEST_TBTT, |
| 0, |
| 8, |
| pbyData |
| ); |
| |
| |
| DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Card:Update Next TBTT[%8xh:%8xh] \n",(int)HIDWORD(qwTSF), (int)LODWORD(qwTSF)); |
| |
| return; |
| } |
| |
| /* |
| * Description: Turn off Radio power |
| * |
| * Parameters: |
| * In: |
| * pDevice - The adapter to be turned off |
| * Out: |
| * none |
| * |
| * Return Value: TRUE if success; otherwise FALSE |
| * |
| */ |
| BOOL CARDbRadioPowerOff(void *pDeviceHandler) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| BOOL bResult = TRUE; |
| |
| //if (pDevice->bRadioOff == TRUE) |
| // return TRUE; |
| |
| pDevice->bRadioOff = TRUE; |
| |
| switch (pDevice->byRFType) { |
| case RF_AL2230: |
| case RF_AL2230S: |
| case RF_AIROHA7230: |
| case RF_VT3226: //RobertYu:20051111 |
| case RF_VT3226D0: |
| case RF_VT3342A0: //RobertYu:20060609 |
| MACvRegBitsOff(pDevice, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPE2 | SOFTPWRCTL_SWPE3)); |
| break; |
| } |
| |
| MACvRegBitsOff(pDevice, MAC_REG_HOSTCR, HOSTCR_RXON); |
| |
| BBvSetDeepSleep(pDevice); |
| |
| return bResult; |
| } |
| |
| |
| /* |
| * Description: Turn on Radio power |
| * |
| * Parameters: |
| * In: |
| * pDevice - The adapter to be turned on |
| * Out: |
| * none |
| * |
| * Return Value: TRUE if success; otherwise FALSE |
| * |
| */ |
| BOOL CARDbRadioPowerOn(void *pDeviceHandler) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| BOOL bResult = TRUE; |
| |
| |
| if ((pDevice->bHWRadioOff == TRUE) || (pDevice->bRadioControlOff == TRUE)) { |
| return FALSE; |
| } |
| |
| //if (pDevice->bRadioOff == FALSE) |
| // return TRUE; |
| |
| pDevice->bRadioOff = FALSE; |
| |
| BBvExitDeepSleep(pDevice); |
| |
| MACvRegBitsOn(pDevice, MAC_REG_HOSTCR, HOSTCR_RXON); |
| |
| switch (pDevice->byRFType) { |
| case RF_AL2230: |
| case RF_AL2230S: |
| case RF_AIROHA7230: |
| case RF_VT3226: //RobertYu:20051111 |
| case RF_VT3226D0: |
| case RF_VT3342A0: //RobertYu:20060609 |
| MACvRegBitsOn(pDevice, MAC_REG_SOFTPWRCTL, (SOFTPWRCTL_SWPE2 | SOFTPWRCTL_SWPE3)); |
| break; |
| } |
| |
| return bResult; |
| } |
| |
| void CARDvSetBSSMode(void *pDeviceHandler) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| // Set BB and packet type at the same time.//{{RobertYu:20050222, AL7230 have two TX PA output, only connet to b/g now |
| // so in 11a mode need to set the MAC Reg0x4C to 11b/g mode to turn on PA |
| if( (pDevice->byRFType == RF_AIROHA7230 ) && (pDevice->byBBType == BB_TYPE_11A) ) |
| { |
| MACvSetBBType(pDevice, BB_TYPE_11G); |
| } |
| else |
| { |
| MACvSetBBType(pDevice, pDevice->byBBType); |
| } |
| pDevice->byPacketType = CARDbyGetPktType(pDevice); |
| |
| if (pDevice->byBBType == BB_TYPE_11A) { |
| ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0x88, 0x03); |
| } else if (pDevice->byBBType == BB_TYPE_11B) { |
| ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0x88, 0x02); |
| } else if (pDevice->byBBType == BB_TYPE_11G) { |
| ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0x88, 0x08); |
| } |
| |
| vUpdateIFS(pDevice); |
| CARDvSetRSPINF(pDevice, (BYTE)pDevice->byBBType); |
| |
| if ( pDevice->byBBType == BB_TYPE_11A ) { |
| //request by Jack 2005-04-26 |
| if (pDevice->byRFType == RF_AIROHA7230) { |
| pDevice->abyBBVGA[0] = 0x20; |
| ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0xE7, pDevice->abyBBVGA[0]); |
| } |
| pDevice->abyBBVGA[2] = 0x10; |
| pDevice->abyBBVGA[3] = 0x10; |
| } else { |
| //request by Jack 2005-04-26 |
| if (pDevice->byRFType == RF_AIROHA7230) { |
| pDevice->abyBBVGA[0] = 0x1C; |
| ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0xE7, pDevice->abyBBVGA[0]); |
| } |
| pDevice->abyBBVGA[2] = 0x0; |
| pDevice->abyBBVGA[3] = 0x0; |
| } |
| } |
| |
| /* |
| * |
| * Description: |
| * Do Channel Switch defined in 802.11h |
| * |
| * Parameters: |
| * In: |
| * hDeviceContext - device structure point |
| * Out: |
| * none |
| * |
| * Return Value: none. |
| * |
| -*/ |
| BOOL |
| CARDbChannelSwitch ( |
| void *pDeviceHandler, |
| BYTE byMode, |
| BYTE byNewChannel, |
| BYTE byCount |
| ) |
| { |
| PSDevice pDevice = (PSDevice) pDeviceHandler; |
| BOOL bResult = TRUE; |
| |
| if (byCount == 0) { |
| pDevice->sMgmtObj.uCurrChannel = byNewChannel; |
| bResult = CARDbSetMediaChannel(pDevice, byNewChannel); |
| |
| return bResult; |
| } |
| pDevice->byChannelSwitchCount = byCount; |
| pDevice->byNewChannel = byNewChannel; |
| pDevice->bChannelSwitch = TRUE; |
| |
| if (byMode == 1) { |
| //bResult=CARDbStopTxPacket(pDevice, PKT_TYPE_802_11_ALL); |
| pDevice->bStopDataPkt = TRUE; |
| } |
| return bResult; |
| } |
| |
| |
| |
| |
| |
| |
