blob: 09e9687431f16a634de396ec0b83ae0bb0e78f81 [file] [log] [blame]
/*
* Copyright © 2011 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
/* Medfield DSI controller registers */
#define MIPIA_DEVICE_READY_REG 0xb000
#define MIPIA_INTR_STAT_REG 0xb004
#define MIPIA_INTR_EN_REG 0xb008
#define MIPIA_DSI_FUNC_PRG_REG 0xb00c
#define MIPIA_HS_TX_TIMEOUT_REG 0xb010
#define MIPIA_LP_RX_TIMEOUT_REG 0xb014
#define MIPIA_TURN_AROUND_TIMEOUT_REG 0xb018
#define MIPIA_DEVICE_RESET_TIMER_REG 0xb01c
#define MIPIA_DPI_RESOLUTION_REG 0xb020
#define MIPIA_DBI_FIFO_THROTTLE_REG 0xb024
#define MIPIA_HSYNC_COUNT_REG 0xb028
#define MIPIA_HBP_COUNT_REG 0xb02c
#define MIPIA_HFP_COUNT_REG 0xb030
#define MIPIA_HACTIVE_COUNT_REG 0xb034
#define MIPIA_VSYNC_COUNT_REG 0xb038
#define MIPIA_VBP_COUNT_REG 0xb03c
#define MIPIA_VFP_COUNT_REG 0xb040
#define MIPIA_HIGH_LOW_SWITCH_COUNT_REG 0xb044
#define MIPIA_DPI_CONTROL_REG 0xb048
#define MIPIA_DPI_DATA_REG 0xb04c
#define MIPIA_INIT_COUNT_REG 0xb050
#define MIPIA_MAX_RETURN_PACK_SIZE_REG 0xb054
#define MIPIA_VIDEO_MODE_FORMAT_REG 0xb058
#define MIPIA_EOT_DISABLE_REG 0xb05c
#define MIPIA_LP_BYTECLK_REG 0xb060
#define MIPIA_LP_GEN_DATA_REG 0xb064
#define MIPIA_HS_GEN_DATA_REG 0xb068
#define MIPIA_LP_GEN_CTRL_REG 0xb06c
#define MIPIA_HS_GEN_CTRL_REG 0xb070
#define MIPIA_GEN_FIFO_STAT_REG 0xb074
#define MIPIA_HS_LS_DBI_ENABLE_REG 0xb078
#define MIPIA_DPHY_PARAM_REG 0xb080
#define MIPIA_DBI_BW_CTRL_REG 0xb084
#define MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG 0xb088
#define DSI_DEVICE_READY (0x1)
#define DSI_POWER_STATE_ULPS_ENTER (0x2 << 1)
#define DSI_POWER_STATE_ULPS_EXIT (0x1 << 1)
#define DSI_POWER_STATE_ULPS_OFFSET (0x1)
#define DSI_ONE_DATA_LANE (0x1)
#define DSI_TWO_DATA_LANE (0x2)
#define DSI_THREE_DATA_LANE (0X3)
#define DSI_FOUR_DATA_LANE (0x4)
#define DSI_DPI_VIRT_CHANNEL_OFFSET (0x3)
#define DSI_DBI_VIRT_CHANNEL_OFFSET (0x5)
#define DSI_DPI_COLOR_FORMAT_RGB565 (0x01 << 7)
#define DSI_DPI_COLOR_FORMAT_RGB666 (0x02 << 7)
#define DSI_DPI_COLOR_FORMAT_RGB666_UNPACK (0x03 << 7)
#define DSI_DPI_COLOR_FORMAT_RGB888 (0x04 << 7)
#define DSI_DBI_COLOR_FORMAT_OPTION2 (0x05 << 13)
#define DSI_INTR_STATE_RXSOTERROR 1
#define DSI_INTR_STATE_SPL_PKG_SENT (1 << 30)
#define DSI_INTR_STATE_TE (1 << 31)
#define DSI_HS_TX_TIMEOUT_MASK (0xffffff)
#define DSI_LP_RX_TIMEOUT_MASK (0xffffff)
#define DSI_TURN_AROUND_TIMEOUT_MASK (0x3f)
#define DSI_RESET_TIMER_MASK (0xffff)
#define DSI_DBI_FIFO_WM_HALF (0x0)
#define DSI_DBI_FIFO_WM_QUARTER (0x1)
#define DSI_DBI_FIFO_WM_LOW (0x2)
#define DSI_DPI_TIMING_MASK (0xffff)
#define DSI_INIT_TIMER_MASK (0xffff)
#define DSI_DBI_RETURN_PACK_SIZE_MASK (0x3ff)
#define DSI_LP_BYTECLK_MASK (0x0ffff)
#define DSI_HS_CTRL_GEN_SHORT_W0 (0x03)
#define DSI_HS_CTRL_GEN_SHORT_W1 (0x13)
#define DSI_HS_CTRL_GEN_SHORT_W2 (0x23)
#define DSI_HS_CTRL_GEN_R0 (0x04)
#define DSI_HS_CTRL_GEN_R1 (0x14)
#define DSI_HS_CTRL_GEN_R2 (0x24)
#define DSI_HS_CTRL_GEN_LONG_W (0x29)
#define DSI_HS_CTRL_MCS_SHORT_W0 (0x05)
#define DSI_HS_CTRL_MCS_SHORT_W1 (0x15)
#define DSI_HS_CTRL_MCS_R0 (0x06)
#define DSI_HS_CTRL_MCS_LONG_W (0x39)
#define DSI_HS_CTRL_VC_OFFSET (0x06)
#define DSI_HS_CTRL_WC_OFFSET (0x08)
#define DSI_FIFO_GEN_HS_DATA_FULL (1 << 0)
#define DSI_FIFO_GEN_HS_DATA_HALF_EMPTY (1 << 1)
#define DSI_FIFO_GEN_HS_DATA_EMPTY (1 << 2)
#define DSI_FIFO_GEN_LP_DATA_FULL (1 << 8)
#define DSI_FIFO_GEN_LP_DATA_HALF_EMPTY (1 << 9)
#define DSI_FIFO_GEN_LP_DATA_EMPTY (1 << 10)
#define DSI_FIFO_GEN_HS_CTRL_FULL (1 << 16)
#define DSI_FIFO_GEN_HS_CTRL_HALF_EMPTY (1 << 17)
#define DSI_FIFO_GEN_HS_CTRL_EMPTY (1 << 18)
#define DSI_FIFO_GEN_LP_CTRL_FULL (1 << 24)
#define DSI_FIFO_GEN_LP_CTRL_HALF_EMPTY (1 << 25)
#define DSI_FIFO_GEN_LP_CTRL_EMPTY (1 << 26)
#define DSI_FIFO_DBI_EMPTY (1 << 27)
#define DSI_FIFO_DPI_EMPTY (1 << 28)
#define DSI_DBI_HS_LP_SWITCH_MASK (0x1)
#define DSI_HS_LP_SWITCH_COUNTER_OFFSET (0x0)
#define DSI_LP_HS_SWITCH_COUNTER_OFFSET (0x16)
#define DSI_DPI_CTRL_HS_SHUTDOWN (0x00000001)
#define DSI_DPI_CTRL_HS_TURN_ON (0x00000002)
/* Medfield DSI adapter registers */
#define MIPIA_CONTROL_REG 0xb104
#define MIPIA_DATA_ADD_REG 0xb108
#define MIPIA_DATA_LEN_REG 0xb10c
#define MIPIA_CMD_ADD_REG 0xb110
#define MIPIA_CMD_LEN_REG 0xb114
/*dsi power modes*/
#define DSI_POWER_MODE_DISPLAY_ON (1 << 2)
#define DSI_POWER_MODE_NORMAL_ON (1 << 3)
#define DSI_POWER_MODE_SLEEP_OUT (1 << 4)
#define DSI_POWER_MODE_PARTIAL_ON (1 << 5)
#define DSI_POWER_MODE_IDLE_ON (1 << 6)
enum {
MDFLD_DSI_ENCODER_DBI = 0,
MDFLD_DSI_ENCODER_DPI,
};
enum {
MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_PULSE = 1,
MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_EVENTS = 2,
MDFLD_DSI_VIDEO_BURST_MODE = 3,
};
#define DSI_DPI_COMPLETE_LAST_LINE (1 << 2)
#define DSI_DPI_DISABLE_BTA (1 << 3)
/* Panel types */
enum {
TPO_CMD,
TPO_VID,
TMD_CMD,
TMD_VID,
PYR_CMD,
PYR_VID,
TPO,
TMD,
PYR,
HDMI,
GCT_DETECT
};
/* Junk that belongs elsewhere */
#define TPO_PANEL_WIDTH 84
#define TPO_PANEL_HEIGHT 46
#define TMD_PANEL_WIDTH 39
#define TMD_PANEL_HEIGHT 71
#define PYR_PANEL_WIDTH 53
#define PYR_PANEL_HEIGHT 95
/* Panel interface */
struct panel_info {
u32 width_mm;
u32 height_mm;
};
struct mdfld_dsi_dbi_output;
struct mdfld_dsi_connector_state {
u32 mipi_ctrl_reg;
};
struct mdfld_dsi_encoder_state {
};
struct mdfld_dsi_connector {
/*
* This is ugly, but I have to use connector in it! :-(
* FIXME: use drm_connector instead.
*/
struct psb_intel_output base;
int pipe;
void *private;
void *pkg_sender;
/* Connection status */
enum drm_connector_status status;
};
struct mdfld_dsi_encoder {
struct drm_encoder base;
void *private;
};
/*
* DSI config, consists of one DSI connector, two DSI encoders.
* DRM will pick up on DSI encoder basing on differents configs.
*/
struct mdfld_dsi_config {
struct drm_device *dev;
struct drm_display_mode *fixed_mode;
struct drm_display_mode *mode;
struct mdfld_dsi_connector *connector;
struct mdfld_dsi_encoder *encoders[DRM_CONNECTOR_MAX_ENCODER];
struct mdfld_dsi_encoder *encoder;
int changed;
int bpp;
int type;
int lane_count;
/*Virtual channel number for this encoder*/
int channel_num;
/*video mode configure*/
int video_mode;
int dvr_ic_inited;
};
#define MDFLD_DSI_CONNECTOR(psb_output) \
(container_of(psb_output, struct mdfld_dsi_connector, base))
#define MDFLD_DSI_ENCODER(encoder) \
(container_of(encoder, struct mdfld_dsi_encoder, base))
struct panel_funcs {
const struct drm_encoder_funcs *encoder_funcs;
const struct drm_encoder_helper_funcs *encoder_helper_funcs;
struct drm_display_mode *(*get_config_mode) (struct drm_device *);
void (*update_fb) (struct mdfld_dsi_dbi_output *, int);
int (*get_panel_info) (struct drm_device *, int, struct panel_info *);
int (*reset)(int pipe);
void (*drv_ic_init)(struct mdfld_dsi_config *dsi_config, int pipe);
};