/*
 *  arch/arm/mach-comcerto/include/mach/comcerto-common.h
 *
 *  Copyright (C) 2012 Mindspeed Technologies, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#ifndef __ASM_ARCH_HARDWARE_H
#error "Do not include this directly, instead #include <asm/hardware.h>"
#endif

#ifndef __ASM_COMCERTO_COMMON_H__
#define __ASM_COMCERTO_COMMON_H__

#include <asm/types.h>

#define APB_VADDR(x)	((x) - COMCERTO_AXI_APB_BASE + COMCERTO_APB_VADDR)		/* macro to get virtual address of IO on APB Bus from Physical address*/
#define AXI_VADDR(x)	((x) - COMCERTO_AXI_SPI_BASE + COMCERTO_AXI_SSI_VADDR)	/* macro to get virtual address of IO on AXI Bus from Physical address*/

#define  BIT_0_MSK   0x00000001
#define  BIT_1_MSK   0x00000002
#define  BIT_2_MSK   0x00000004
#define  BIT_3_MSK   0x00000008
#define  BIT_4_MSK   0x00000010
#define  BIT_5_MSK   0x00000020
#define  BIT_6_MSK   0x00000040
#define  BIT_7_MSK   0x00000080
#define  BIT_8_MSK   0x00000100
#define  BIT_9_MSK   0x00000200
#define  BIT_10_MSK  0x00000400
#define  BIT_11_MSK  0x00000800
#define  BIT_12_MSK  0x00001000
#define  BIT_13_MSK  0x00002000
#define  BIT_14_MSK  0x00004000
#define  BIT_15_MSK  0x00008000
#define  BIT_16_MSK  0x00010000
#define  BIT_17_MSK  0x00020000
#define  BIT_18_MSK  0x00040000
#define  BIT_19_MSK  0x00080000
#define  BIT_20_MSK  0x00100000
#define  BIT_21_MSK  0x00200000
#define  BIT_22_MSK  0x00400000
#define  BIT_23_MSK  0x00800000
#define  BIT_24_MSK  0x01000000
#define  BIT_25_MSK  0x02000000
#define  BIT_26_MSK  0x04000000
#define  BIT_27_MSK  0x08000000
#define  BIT_28_MSK  0x10000000
#define  BIT_29_MSK  0x20000000
#define  BIT_30_MSK  0x40000000
#define  BIT_31_MSK  0x80000000

/*
 * GPIO
 */
/* Set gpio pins specified by gpiomask to be outputs */
#define comcerto_gpio_enable_output(gpiomask)	__raw_writel(__raw_readl(COMCERTO_GPIO_OE_REG) | (gpiomask), COMCERTO_GPIO_OE_REG)

/* Set output pins specified by gpiomask to low */
#define comcerto_gpio_set_0(gpiomask)	__raw_writel(__raw_readl(COMCERTO_GPIO_OUTPUT_REG) & ~(gpiomask), COMCERTO_GPIO_OUTPUT_REG)

/* Set output pins specified by gpiomask to high */
#define comcerto_gpio_set_1(gpiomask)	__raw_writel(__raw_readl(COMCERTO_GPIO_OUTPUT_REG) | (gpiomask), COMCERTO_GPIO_OUTPUT_REG)

/* Read status of input pins specified by gpiomask */
#define comcerto_gpio_read(gpiomask)	(__raw_readl(COMCERTO_GPIO_INPUT_REG) & (gpiomask))


#ifndef __ASSEMBLY__
#define CONFIG_COMCERTO_GEMAC		1

#define CONFIG_COMCERTO_USE_MII		1
#define CONFIG_COMCERTO_USE_RMII		2
#define CONFIG_COMCERTO_USE_GMII		4
#define CONFIG_COMCERTO_USE_RGMII	8
#define CONFIG_COMCERTO_USE_SGMII	0x10

#define GEMAC_SW_CONF			(1 << 8) | (1 << 11)	// GEMAC configured by SW
#define GEMAC_PHY_CONF		0			// GEMAC configured by phy lines (not for MII/GMII)
#define GEMAC_SW_FULL_DUPLEX	(1 << 9)
#define GEMAC_SW_SPEED_10M	(0 << 12)
#define GEMAC_SW_SPEED_100M	(1 << 12)
#define GEMAC_SW_SPEED_1G		(2 << 12)

#define GEMAC_NO_PHY			(1 << 0)		// set if no phy connected to MAC (ex ethernet switch). In this case use MAC fixed configuration
#define GEMAC_PHY_RGMII_ADD_DELAY	(1 << 1)

/* gemac to interface name assignment */
#define GEM0_ITF_NAME "eth0"
#define GEM1_ITF_NAME "eth2"
#define GEM2_ITF_NAME "eth3"

#define GEM0_MAC { 0x00, 0xED, 0xCD, 0xEF, 0xAA, 0xCC }
#define GEM1_MAC { 0x00, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E }
#define GEM2_MAC { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 }

struct comcerto_eth_platform_data {
	/* device specific information */
	u32 device_flags;
	char name[16];


	/* board specific information */
	u32 mii_config;
	u32 gemac_mode;
	u32 phy_flags;
	u32 gem_id;
	u32 bus_id;
	u32 phy_id;
	u8 *mac_addr;
};

struct comcerto_mdio_platform_data {
	int enabled;
	int irq[32];
	u32 phy_mask;
	int mdc_div;
};

struct comcerto_pfe_platform_data
{
	struct comcerto_eth_platform_data comcerto_eth_pdata[3];
	struct comcerto_mdio_platform_data comcerto_mdio_pdata[3];
};

struct comcerto_tdm_data {
	u8 fsoutput; /* Generic Pad Control and Version ID Register[2] */
	u8 fspolarity; /*  28 FSYNC_FALL(RISE)_EDGE */
	u16 fshwidth; /* High_Phase_Width[10:0] */
	u16 fslwidth; /* Low_Phase_Width[26:16]] */
	u32 clockhz; /* INC_VALUE[29:0] According to the desired TDM clock output frequency, this field should be configured */
	u8 clockout; /* IO Control Register[21]  hardware or software control selection  IO Control Register[20] pads are input (output) */
	u8 tdmmux;
#if 0
	u32 tdmck;
	u32 tdmfs;
	u32 tdmdx;
	u32 tdmdr;
#endif
};

/* L210 cache controller value
    // Configure Aux:
    //   [11:9]=[8:6]=[2:0]=001 RAM LAT = 2 cycles
    //   [5:3]=000    Data write latency is 1
    //   [12]=0       WRAP access is enabled
    //   [16:13]=1000 8-way cache
    //   [19:17]=001  16KB way
    //   [20]=1       Event bus is enabled
    //   [21]=1       Parity is enabled
    //   [22]=0       Shared accesses treated as noncacheable
    //   [23]=0       HPROT is used
    //   [24]=1       Abort generation of exclusive access disabled
*/
#define L210_AUX_CTRL_REG	0x01330241

#endif
#endif