| * Broadcom STB MoCA driver bindings |
| |
| The Broadcom STB MoCA core driver provides access to the moca core |
| for setting various moca properties and loading moca FW |
| |
| Required properties: |
| compatible : should contain "brcm,bmoca-instance" |
| reg : the register start and length for MoCA controller |
| interrupts : The MoCA interrupt |
| #address-cells : <1> |
| #size-cells : <1> |
| mac-address : 6-byte mac address |
| rf-band : rf band string, possible values "highrf, midrf, wanrf, |
| ext_d, d_low, d_high, e, f, g |
| hw-rev : HW revision number |
| enet-id : phandle to the internal ethernet phy (bcmgenet) |
| |
| Optional properties: |
| use-dma : boolean, indicating controller support for DMA |
| i2c-base : MoCA i2c base register address |
| i2c-addr : i2c slave address |
| use-spi : boolean, indicating controller support for spi interface |
| |
| Example: |
| |
| bmoca@f0e00000 { |
| compatible = "brcm,bmoca-instance"; |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| mac-address = [ 00 10 18 03 25 d7 ]; |
| rf-band = "highrf"; |
| reg = <0xf0e00000 0x1ffda0>; |
| interrupts = <0x0 0x1d 0x0>; |
| hw-rev = <0x2003>; |
| enet-id = <0x7>; |
| }; |
