| * Samsung Exynos5420 Clock Controller |
| |
| The Exynos5420 clock controller generates and supplies clock to various |
| controllers within the Exynos5420 SoC. |
| |
| Required Properties: |
| |
| - compatible: should be one of the following. |
| - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC. |
| |
| - reg: physical base address of the controller and length of memory mapped |
| region. |
| |
| - #clock-cells: should be 1. |
| |
| The following is the list of clocks generated by the controller. Each clock is |
| assigned an identifier and client nodes use this identifier to specify the |
| clock which they consume. |
| |
| |
| [Core Clocks] |
| |
| Clock ID |
| ---------------------------- |
| |
| fin_pll 1 |
| |
| [Clock Gate for Special Clocks] |
| |
| Clock ID |
| ---------------------------- |
| sclk_uart0 128 |
| sclk_uart1 129 |
| sclk_uart2 130 |
| sclk_uart3 131 |
| sclk_mmc0 132 |
| sclk_mmc1 133 |
| sclk_mmc2 134 |
| sclk_spi0 135 |
| sclk_spi1 136 |
| sclk_spi2 137 |
| sclk_i2s1 138 |
| sclk_i2s2 139 |
| sclk_pcm1 140 |
| sclk_pcm2 141 |
| sclk_spdif 142 |
| sclk_hdmi 143 |
| sclk_pixel 144 |
| sclk_dp1 145 |
| sclk_mipi1 146 |
| sclk_fimd1 147 |
| sclk_maudio0 148 |
| sclk_maupcm0 149 |
| sclk_usbd300 150 |
| sclk_usbd301 151 |
| sclk_usbphy300 152 |
| sclk_usbphy301 153 |
| sclk_unipro 154 |
| sclk_pwm 155 |
| sclk_gscl_wa 156 |
| sclk_gscl_wb 157 |
| sclk_hdmiphy 158 |
| |
| [Peripheral Clock Gates] |
| |
| Clock ID |
| ---------------------------- |
| |
| aclk66_peric 256 |
| uart0 257 |
| uart1 258 |
| uart2 259 |
| uart3 260 |
| i2c0 261 |
| i2c1 262 |
| i2c2 263 |
| i2c3 264 |
| i2c4 265 |
| i2c5 266 |
| i2c6 267 |
| i2c7 268 |
| i2c_hdmi 269 |
| tsadc 270 |
| spi0 271 |
| spi1 272 |
| spi2 273 |
| keyif 274 |
| i2s1 275 |
| i2s2 276 |
| pcm1 277 |
| pcm2 278 |
| pwm 279 |
| spdif 280 |
| i2c8 281 |
| i2c9 282 |
| i2c10 283 |
| aclk66_psgen 300 |
| chipid 301 |
| sysreg 302 |
| tzpc0 303 |
| tzpc1 304 |
| tzpc2 305 |
| tzpc3 306 |
| tzpc4 307 |
| tzpc5 308 |
| tzpc6 309 |
| tzpc7 310 |
| tzpc8 311 |
| tzpc9 312 |
| hdmi_cec 313 |
| seckey 314 |
| mct 315 |
| wdt 316 |
| rtc 317 |
| tmu 318 |
| tmu_gpu 319 |
| pclk66_gpio 330 |
| aclk200_fsys2 350 |
| mmc0 351 |
| mmc1 352 |
| mmc2 353 |
| sromc 354 |
| ufs 355 |
| aclk200_fsys 360 |
| tsi 361 |
| pdma0 362 |
| pdma1 363 |
| rtic 364 |
| usbh20 365 |
| usbd300 366 |
| usbd301 377 |
| aclk400_mscl 380 |
| mscl0 381 |
| mscl1 382 |
| mscl2 383 |
| smmu_mscl0 384 |
| smmu_mscl1 385 |
| smmu_mscl2 386 |
| aclk333 400 |
| mfc 401 |
| smmu_mfcl 402 |
| smmu_mfcr 403 |
| aclk200_disp1 410 |
| dsim1 411 |
| dp1 412 |
| hdmi 413 |
| aclk300_disp1 420 |
| fimd1 421 |
| smmu_fimd1 422 |
| aclk166 430 |
| mixer 431 |
| aclk266 440 |
| rotator 441 |
| mdma1 442 |
| smmu_rotator 443 |
| smmu_mdma1 444 |
| aclk300_jpeg 450 |
| jpeg 451 |
| jpeg2 452 |
| smmu_jpeg 453 |
| aclk300_gscl 460 |
| smmu_gscl0 461 |
| smmu_gscl1 462 |
| gscl_wa 463 |
| gscl_wb 464 |
| gscl0 465 |
| gscl1 466 |
| clk_3aa 467 |
| aclk266_g2d 470 |
| sss 471 |
| slim_sss 472 |
| mdma0 473 |
| aclk333_g2d 480 |
| g2d 481 |
| aclk333_432_gscl 490 |
| smmu_3aa 491 |
| smmu_fimcl0 492 |
| smmu_fimcl1 493 |
| smmu_fimcl3 494 |
| fimc_lite3 495 |
| aclk_g3d 500 |
| g3d 501 |
| smmu_mixer 502 |
| |
| Mux ID |
| ---------------------------- |
| |
| mout_hdmi 640 |
| |
| Divider ID |
| ---------------------------- |
| |
| dout_pixel 768 |
| |
| Example 1: An example of a clock controller node is listed below. |
| |
| clock: clock-controller@0x10010000 { |
| compatible = "samsung,exynos5420-clock"; |
| reg = <0x10010000 0x30000>; |
| #clock-cells = <1>; |
| }; |
| |
| Example 2: UART controller node that consumes the clock generated by the clock |
| controller. Refer to the standard clock bindings for information |
| about 'clocks' and 'clock-names' property. |
| |
| serial@13820000 { |
| compatible = "samsung,exynos4210-uart"; |
| reg = <0x13820000 0x100>; |
| interrupts = <0 54 0>; |
| clocks = <&clock 259>, <&clock 130>; |
| clock-names = "uart", "clk_uart_baud0"; |
| }; |
