| /* |
| * SAMSUNG EXYNOS5420 SoC device tree source |
| * |
| * Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file. |
| * EXYNOS5420 based board files can include this file and provide |
| * values for board specfic bindings. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <dt-bindings/clock/exynos5420.h> |
| #include "exynos5.dtsi" |
| #include "exynos5420-pinctrl.dtsi" |
| |
| #include <dt-bindings/clock/exynos-audss-clk.h> |
| |
| / { |
| compatible = "samsung,exynos5420", "samsung,exynos5"; |
| |
| aliases { |
| mshc0 = &mmc_0; |
| mshc1 = &mmc_1; |
| mshc2 = &mmc_2; |
| pinctrl0 = &pinctrl_0; |
| pinctrl1 = &pinctrl_1; |
| pinctrl2 = &pinctrl_2; |
| pinctrl3 = &pinctrl_3; |
| pinctrl4 = &pinctrl_4; |
| i2c0 = &i2c_0; |
| i2c1 = &i2c_1; |
| i2c2 = &i2c_2; |
| i2c3 = &i2c_3; |
| i2c4 = &hsi2c_4; |
| i2c5 = &hsi2c_5; |
| i2c6 = &hsi2c_6; |
| i2c7 = &hsi2c_7; |
| i2c8 = &hsi2c_8; |
| i2c9 = &hsi2c_9; |
| i2c10 = &hsi2c_10; |
| gsc0 = &gsc_0; |
| gsc1 = &gsc_1; |
| spi0 = &spi_0; |
| spi1 = &spi_1; |
| spi2 = &spi_2; |
| usbdrdphy0 = &usbdrd_phy0; |
| usbdrdphy1 = &usbdrd_phy1; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x0>; |
| clock-frequency = <1800000000>; |
| cci-control-port = <&cci_control1>; |
| }; |
| |
| cpu1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x1>; |
| clock-frequency = <1800000000>; |
| cci-control-port = <&cci_control1>; |
| }; |
| |
| cpu2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x2>; |
| clock-frequency = <1800000000>; |
| cci-control-port = <&cci_control1>; |
| }; |
| |
| cpu3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x3>; |
| clock-frequency = <1800000000>; |
| cci-control-port = <&cci_control1>; |
| }; |
| |
| cpu4: cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x100>; |
| clock-frequency = <1000000000>; |
| cci-control-port = <&cci_control0>; |
| }; |
| |
| cpu5: cpu@101 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x101>; |
| clock-frequency = <1000000000>; |
| cci-control-port = <&cci_control0>; |
| }; |
| |
| cpu6: cpu@102 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x102>; |
| clock-frequency = <1000000000>; |
| cci-control-port = <&cci_control0>; |
| }; |
| |
| cpu7: cpu@103 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x103>; |
| clock-frequency = <1000000000>; |
| cci-control-port = <&cci_control0>; |
| }; |
| }; |
| |
| cci: cci@10d20000 { |
| compatible = "arm,cci-400"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x10d20000 0x1000>; |
| ranges = <0x0 0x10d20000 0x6000>; |
| |
| cci_control0: slave-if@4000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace"; |
| reg = <0x4000 0x1000>; |
| }; |
| cci_control1: slave-if@5000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace"; |
| reg = <0x5000 0x1000>; |
| }; |
| }; |
| |
| sysram@02020000 { |
| compatible = "mmio-sram"; |
| reg = <0x02020000 0x54000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x02020000 0x54000>; |
| |
| smp-sysram@0 { |
| compatible = "samsung,exynos4210-sysram"; |
| reg = <0x0 0x1000>; |
| }; |
| |
| smp-sysram@53000 { |
| compatible = "samsung,exynos4210-sysram-ns"; |
| reg = <0x53000 0x1000>; |
| }; |
| }; |
| |
| clock: clock-controller@10010000 { |
| compatible = "samsung,exynos5420-clock"; |
| reg = <0x10010000 0x30000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_audss: audss-clock-controller@3810000 { |
| compatible = "samsung,exynos5420-audss-clock"; |
| reg = <0x03810000 0x0C>; |
| #clock-cells = <1>; |
| clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>, |
| <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>; |
| clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; |
| }; |
| |
| mfc: codec@11000000 { |
| compatible = "samsung,mfc-v7"; |
| reg = <0x11000000 0x10000>; |
| interrupts = <0 96 0>; |
| clocks = <&clock CLK_MFC>; |
| clock-names = "mfc"; |
| power-domains = <&mfc_pd>; |
| }; |
| |
| mmc_0: mmc@12200000 { |
| compatible = "samsung,exynos5420-dw-mshc-smu"; |
| interrupts = <0 75 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x12200000 0x2000>; |
| clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x40>; |
| status = "disabled"; |
| }; |
| |
| mmc_1: mmc@12210000 { |
| compatible = "samsung,exynos5420-dw-mshc-smu"; |
| interrupts = <0 76 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x12210000 0x2000>; |
| clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x40>; |
| status = "disabled"; |
| }; |
| |
| mmc_2: mmc@12220000 { |
| compatible = "samsung,exynos5420-dw-mshc"; |
| interrupts = <0 77 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x12220000 0x1000>; |
| clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x40>; |
| status = "disabled"; |
| }; |
| |
| mct: mct@101C0000 { |
| compatible = "samsung,exynos4210-mct"; |
| reg = <0x101C0000 0x800>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&mct_map>; |
| interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, |
| <8>, <9>, <10>, <11>; |
| clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; |
| clock-names = "fin_pll", "mct"; |
| |
| mct_map: mct-map { |
| #interrupt-cells = <1>; |
| #address-cells = <0>; |
| #size-cells = <0>; |
| interrupt-map = <0 &combiner 23 3>, |
| <1 &combiner 23 4>, |
| <2 &combiner 25 2>, |
| <3 &combiner 25 3>, |
| <4 &gic 0 120 0>, |
| <5 &gic 0 121 0>, |
| <6 &gic 0 122 0>, |
| <7 &gic 0 123 0>, |
| <8 &gic 0 128 0>, |
| <9 &gic 0 129 0>, |
| <10 &gic 0 130 0>, |
| <11 &gic 0 131 0>; |
| }; |
| }; |
| |
| gsc_pd: power-domain@10044000 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10044000 0x20>; |
| #power-domain-cells = <0>; |
| clocks = <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; |
| clock-names = "asb0", "asb1"; |
| }; |
| |
| isp_pd: power-domain@10044020 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10044020 0x20>; |
| #power-domain-cells = <0>; |
| }; |
| |
| mfc_pd: power-domain@10044060 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10044060 0x20>; |
| clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, |
| <&clock CLK_MOUT_USER_ACLK333>; |
| clock-names = "oscclk", "pclk0", "clk0"; |
| #power-domain-cells = <0>; |
| }; |
| |
| msc_pd: power-domain@10044120 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10044120 0x20>; |
| #power-domain-cells = <0>; |
| }; |
| |
| disp_pd: power-domain@100440C0 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x100440C0 0x20>; |
| #power-domain-cells = <0>; |
| clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK200>, |
| <&clock CLK_MOUT_USER_ACLK200_DISP1>, |
| <&clock CLK_MOUT_SW_ACLK300>, |
| <&clock CLK_MOUT_USER_ACLK300_DISP1>, |
| <&clock CLK_MOUT_SW_ACLK400>, |
| <&clock CLK_MOUT_USER_ACLK400_DISP1>, |
| <&clock CLK_FIMD1>, <&clock CLK_MIXER>; |
| clock-names = "oscclk", "pclk0", "clk0", |
| "pclk1", "clk1", "pclk2", "clk2", |
| "asb0", "asb1"; |
| }; |
| |
| pinctrl_0: pinctrl@13400000 { |
| compatible = "samsung,exynos5420-pinctrl"; |
| reg = <0x13400000 0x1000>; |
| interrupts = <0 45 0>; |
| |
| wakeup-interrupt-controller { |
| compatible = "samsung,exynos4210-wakeup-eint"; |
| interrupt-parent = <&gic>; |
| interrupts = <0 32 0>; |
| }; |
| }; |
| |
| pinctrl_1: pinctrl@13410000 { |
| compatible = "samsung,exynos5420-pinctrl"; |
| reg = <0x13410000 0x1000>; |
| interrupts = <0 78 0>; |
| }; |
| |
| pinctrl_2: pinctrl@14000000 { |
| compatible = "samsung,exynos5420-pinctrl"; |
| reg = <0x14000000 0x1000>; |
| interrupts = <0 46 0>; |
| }; |
| |
| pinctrl_3: pinctrl@14010000 { |
| compatible = "samsung,exynos5420-pinctrl"; |
| reg = <0x14010000 0x1000>; |
| interrupts = <0 50 0>; |
| }; |
| |
| pinctrl_4: pinctrl@03860000 { |
| compatible = "samsung,exynos5420-pinctrl"; |
| reg = <0x03860000 0x1000>; |
| interrupts = <0 47 0>; |
| }; |
| |
| rtc: rtc@101E0000 { |
| clocks = <&clock CLK_RTC>; |
| clock-names = "rtc"; |
| interrupt-parent = <&pmu_system_controller>; |
| status = "disabled"; |
| }; |
| |
| amba { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "arm,amba-bus"; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| adma: adma@03880000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x03880000 0x1000>; |
| interrupts = <0 110 0>; |
| clocks = <&clock_audss EXYNOS_ADMA>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <6>; |
| #dma-requests = <16>; |
| }; |
| |
| pdma0: pdma@121A0000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x121A0000 0x1000>; |
| interrupts = <0 34 0>; |
| clocks = <&clock CLK_PDMA0>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| }; |
| |
| pdma1: pdma@121B0000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x121B0000 0x1000>; |
| interrupts = <0 35 0>; |
| clocks = <&clock CLK_PDMA1>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| }; |
| |
| mdma0: mdma@10800000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x10800000 0x1000>; |
| interrupts = <0 33 0>; |
| clocks = <&clock CLK_MDMA0>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <1>; |
| }; |
| |
| mdma1: mdma@11C10000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x11C10000 0x1000>; |
| interrupts = <0 124 0>; |
| clocks = <&clock CLK_MDMA1>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <1>; |
| /* |
| * MDMA1 can support both secure and non-secure |
| * AXI transactions. When this is enabled in the kernel |
| * for boards that run in secure mode, we are getting |
| * imprecise external aborts causing the kernel to oops. |
| */ |
| status = "disabled"; |
| }; |
| }; |
| |
| i2s0: i2s@03830000 { |
| compatible = "samsung,exynos5420-i2s"; |
| reg = <0x03830000 0x100>; |
| dmas = <&adma 0 |
| &adma 2 |
| &adma 1>; |
| dma-names = "tx", "rx", "tx-sec"; |
| clocks = <&clock_audss EXYNOS_I2S_BUS>, |
| <&clock_audss EXYNOS_I2S_BUS>, |
| <&clock_audss EXYNOS_SCLK_I2S>; |
| clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; |
| samsung,idma-addr = <0x03000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s0_bus>; |
| status = "disabled"; |
| }; |
| |
| i2s1: i2s@12D60000 { |
| compatible = "samsung,exynos5420-i2s"; |
| reg = <0x12D60000 0x100>; |
| dmas = <&pdma1 12 |
| &pdma1 11>; |
| dma-names = "tx", "rx"; |
| clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>; |
| clock-names = "iis", "i2s_opclk0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s1_bus>; |
| status = "disabled"; |
| }; |
| |
| i2s2: i2s@12D70000 { |
| compatible = "samsung,exynos5420-i2s"; |
| reg = <0x12D70000 0x100>; |
| dmas = <&pdma0 12 |
| &pdma0 11>; |
| dma-names = "tx", "rx"; |
| clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>; |
| clock-names = "iis", "i2s_opclk0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s2_bus>; |
| status = "disabled"; |
| }; |
| |
| spi_0: spi@12d20000 { |
| compatible = "samsung,exynos4210-spi"; |
| reg = <0x12d20000 0x100>; |
| interrupts = <0 68 0>; |
| dmas = <&pdma0 5 |
| &pdma0 4>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_bus>; |
| clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; |
| clock-names = "spi", "spi_busclk0"; |
| status = "disabled"; |
| }; |
| |
| spi_1: spi@12d30000 { |
| compatible = "samsung,exynos4210-spi"; |
| reg = <0x12d30000 0x100>; |
| interrupts = <0 69 0>; |
| dmas = <&pdma1 5 |
| &pdma1 4>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi1_bus>; |
| clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; |
| clock-names = "spi", "spi_busclk0"; |
| status = "disabled"; |
| }; |
| |
| spi_2: spi@12d40000 { |
| compatible = "samsung,exynos4210-spi"; |
| reg = <0x12d40000 0x100>; |
| interrupts = <0 70 0>; |
| dmas = <&pdma0 7 |
| &pdma0 6>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi2_bus>; |
| clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; |
| clock-names = "spi", "spi_busclk0"; |
| status = "disabled"; |
| }; |
| |
| uart_0: serial@12C00000 { |
| clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; |
| clock-names = "uart", "clk_uart_baud0"; |
| }; |
| |
| uart_1: serial@12C10000 { |
| clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; |
| clock-names = "uart", "clk_uart_baud0"; |
| }; |
| |
| uart_2: serial@12C20000 { |
| clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; |
| clock-names = "uart", "clk_uart_baud0"; |
| }; |
| |
| uart_3: serial@12C30000 { |
| clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; |
| clock-names = "uart", "clk_uart_baud0"; |
| }; |
| |
| pwm: pwm@12dd0000 { |
| compatible = "samsung,exynos4210-pwm"; |
| reg = <0x12dd0000 0x100>; |
| samsung,pwm-outputs = <0>, <1>, <2>, <3>; |
| #pwm-cells = <3>; |
| clocks = <&clock CLK_PWM>; |
| clock-names = "timers"; |
| }; |
| |
| dp_phy: video-phy@10040728 { |
| compatible = "samsung,exynos5420-dp-video-phy"; |
| samsung,pmu-syscon = <&pmu_system_controller>; |
| #phy-cells = <0>; |
| }; |
| |
| dp: dp-controller@145B0000 { |
| clocks = <&clock CLK_DP1>; |
| clock-names = "dp"; |
| phys = <&dp_phy>; |
| phy-names = "dp"; |
| power-domains = <&disp_pd>; |
| }; |
| |
| mipi_phy: video-phy@10040714 { |
| compatible = "samsung,s5pv210-mipi-video-phy"; |
| reg = <0x10040714 12>; |
| #phy-cells = <1>; |
| }; |
| |
| dsi@14500000 { |
| compatible = "samsung,exynos5410-mipi-dsi"; |
| reg = <0x14500000 0x10000>; |
| interrupts = <0 82 0>; |
| phys = <&mipi_phy 1>; |
| phy-names = "dsim"; |
| clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>; |
| clock-names = "bus_clk", "pll_clk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| fimd: fimd@14400000 { |
| clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; |
| clock-names = "sclk_fimd", "fimd"; |
| power-domains = <&disp_pd>; |
| }; |
| |
| adc: adc@12D10000 { |
| compatible = "samsung,exynos-adc-v2"; |
| reg = <0x12D10000 0x100>; |
| interrupts = <0 106 0>; |
| clocks = <&clock CLK_TSADC>; |
| clock-names = "adc"; |
| #io-channel-cells = <1>; |
| io-channel-ranges; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| status = "disabled"; |
| }; |
| |
| i2c_0: i2c@12C60000 { |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x12C60000 0x100>; |
| interrupts = <0 56 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_I2C0>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_bus>; |
| samsung,sysreg-phandle = <&sysreg_system_controller>; |
| status = "disabled"; |
| }; |
| |
| i2c_1: i2c@12C70000 { |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x12C70000 0x100>; |
| interrupts = <0 57 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_I2C1>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_bus>; |
| samsung,sysreg-phandle = <&sysreg_system_controller>; |
| status = "disabled"; |
| }; |
| |
| i2c_2: i2c@12C80000 { |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x12C80000 0x100>; |
| interrupts = <0 58 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_I2C2>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_bus>; |
| samsung,sysreg-phandle = <&sysreg_system_controller>; |
| status = "disabled"; |
| }; |
| |
| i2c_3: i2c@12C90000 { |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x12C90000 0x100>; |
| interrupts = <0 59 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_I2C3>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_bus>; |
| samsung,sysreg-phandle = <&sysreg_system_controller>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_4: i2c@12CA0000 { |
| compatible = "samsung,exynos5-hsi2c"; |
| reg = <0x12CA0000 0x1000>; |
| interrupts = <0 60 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c4_hs_bus>; |
| clocks = <&clock CLK_USI0>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_5: i2c@12CB0000 { |
| compatible = "samsung,exynos5-hsi2c"; |
| reg = <0x12CB0000 0x1000>; |
| interrupts = <0 61 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c5_hs_bus>; |
| clocks = <&clock CLK_USI1>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_6: i2c@12CC0000 { |
| compatible = "samsung,exynos5-hsi2c"; |
| reg = <0x12CC0000 0x1000>; |
| interrupts = <0 62 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c6_hs_bus>; |
| clocks = <&clock CLK_USI2>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_7: i2c@12CD0000 { |
| compatible = "samsung,exynos5-hsi2c"; |
| reg = <0x12CD0000 0x1000>; |
| interrupts = <0 63 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c7_hs_bus>; |
| clocks = <&clock CLK_USI3>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_8: i2c@12E00000 { |
| compatible = "samsung,exynos5-hsi2c"; |
| reg = <0x12E00000 0x1000>; |
| interrupts = <0 87 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c8_hs_bus>; |
| clocks = <&clock CLK_USI4>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_9: i2c@12E10000 { |
| compatible = "samsung,exynos5-hsi2c"; |
| reg = <0x12E10000 0x1000>; |
| interrupts = <0 88 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c9_hs_bus>; |
| clocks = <&clock CLK_USI5>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_10: i2c@12E20000 { |
| compatible = "samsung,exynos5-hsi2c"; |
| reg = <0x12E20000 0x1000>; |
| interrupts = <0 203 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c10_hs_bus>; |
| clocks = <&clock CLK_USI6>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hdmi: hdmi@14530000 { |
| compatible = "samsung,exynos5420-hdmi"; |
| reg = <0x14530000 0x70000>; |
| interrupts = <0 95 0>; |
| clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, |
| <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, |
| <&clock CLK_MOUT_HDMI>; |
| clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", |
| "sclk_hdmiphy", "mout_hdmi"; |
| phy = <&hdmiphy>; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| status = "disabled"; |
| power-domains = <&disp_pd>; |
| }; |
| |
| hdmiphy: hdmiphy@145D0000 { |
| reg = <0x145D0000 0x20>; |
| }; |
| |
| mixer: mixer@14450000 { |
| compatible = "samsung,exynos5420-mixer"; |
| reg = <0x14450000 0x10000>; |
| interrupts = <0 94 0>; |
| clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, |
| <&clock CLK_SCLK_HDMI>; |
| clock-names = "mixer", "hdmi", "sclk_hdmi"; |
| power-domains = <&disp_pd>; |
| }; |
| |
| gsc_0: video-scaler@13e00000 { |
| compatible = "samsung,exynos5-gsc"; |
| reg = <0x13e00000 0x1000>; |
| interrupts = <0 85 0>; |
| clocks = <&clock CLK_GSCL0>; |
| clock-names = "gscl"; |
| power-domains = <&gsc_pd>; |
| }; |
| |
| gsc_1: video-scaler@13e10000 { |
| compatible = "samsung,exynos5-gsc"; |
| reg = <0x13e10000 0x1000>; |
| interrupts = <0 86 0>; |
| clocks = <&clock CLK_GSCL1>; |
| clock-names = "gscl"; |
| power-domains = <&gsc_pd>; |
| }; |
| |
| pmu_system_controller: system-controller@10040000 { |
| compatible = "samsung,exynos5420-pmu", "syscon"; |
| reg = <0x10040000 0x5000>; |
| clock-names = "clkout16"; |
| clocks = <&clock CLK_FIN_PLL>; |
| #clock-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupt-parent = <&gic>; |
| }; |
| |
| sysreg_system_controller: syscon@10050000 { |
| compatible = "samsung,exynos5-sysreg", "syscon"; |
| reg = <0x10050000 0x5000>; |
| }; |
| |
| tmu_cpu0: tmu@10060000 { |
| compatible = "samsung,exynos5420-tmu"; |
| reg = <0x10060000 0x100>; |
| interrupts = <0 65 0>; |
| clocks = <&clock CLK_TMU>; |
| clock-names = "tmu_apbif"; |
| #include "exynos4412-tmu-sensor-conf.dtsi" |
| }; |
| |
| tmu_cpu1: tmu@10064000 { |
| compatible = "samsung,exynos5420-tmu"; |
| reg = <0x10064000 0x100>; |
| interrupts = <0 183 0>; |
| clocks = <&clock CLK_TMU>; |
| clock-names = "tmu_apbif"; |
| #include "exynos4412-tmu-sensor-conf.dtsi" |
| }; |
| |
| tmu_cpu2: tmu@10068000 { |
| compatible = "samsung,exynos5420-tmu-ext-triminfo"; |
| reg = <0x10068000 0x100>, <0x1006c000 0x4>; |
| interrupts = <0 184 0>; |
| clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; |
| clock-names = "tmu_apbif", "tmu_triminfo_apbif"; |
| #include "exynos4412-tmu-sensor-conf.dtsi" |
| }; |
| |
| tmu_cpu3: tmu@1006c000 { |
| compatible = "samsung,exynos5420-tmu-ext-triminfo"; |
| reg = <0x1006c000 0x100>, <0x100a0000 0x4>; |
| interrupts = <0 185 0>; |
| clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; |
| clock-names = "tmu_apbif", "tmu_triminfo_apbif"; |
| #include "exynos4412-tmu-sensor-conf.dtsi" |
| }; |
| |
| tmu_gpu: tmu@100a0000 { |
| compatible = "samsung,exynos5420-tmu-ext-triminfo"; |
| reg = <0x100a0000 0x100>, <0x10068000 0x4>; |
| interrupts = <0 215 0>; |
| clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; |
| clock-names = "tmu_apbif", "tmu_triminfo_apbif"; |
| #include "exynos4412-tmu-sensor-conf.dtsi" |
| }; |
| |
| thermal-zones { |
| cpu0_thermal: cpu0-thermal { |
| thermal-sensors = <&tmu_cpu0>; |
| #include "exynos5420-trip-points.dtsi" |
| }; |
| cpu1_thermal: cpu1-thermal { |
| thermal-sensors = <&tmu_cpu1>; |
| #include "exynos5420-trip-points.dtsi" |
| }; |
| cpu2_thermal: cpu2-thermal { |
| thermal-sensors = <&tmu_cpu2>; |
| #include "exynos5420-trip-points.dtsi" |
| }; |
| cpu3_thermal: cpu3-thermal { |
| thermal-sensors = <&tmu_cpu3>; |
| #include "exynos5420-trip-points.dtsi" |
| }; |
| gpu_thermal: gpu-thermal { |
| thermal-sensors = <&tmu_gpu>; |
| #include "exynos5420-trip-points.dtsi" |
| }; |
| }; |
| |
| watchdog: watchdog@101D0000 { |
| compatible = "samsung,exynos5420-wdt"; |
| reg = <0x101D0000 0x100>; |
| interrupts = <0 42 0>; |
| clocks = <&clock CLK_WDT>; |
| clock-names = "watchdog"; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| }; |
| |
| sss: sss@10830000 { |
| compatible = "samsung,exynos4210-secss"; |
| reg = <0x10830000 0x10000>; |
| interrupts = <0 112 0>; |
| clocks = <&clock CLK_SSS>; |
| clock-names = "secss"; |
| }; |
| |
| usbdrd3_0: usb@12000000 { |
| compatible = "samsung,exynos5250-dwusb3"; |
| clocks = <&clock CLK_USBD300>; |
| clock-names = "usbdrd30"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| usbdrd_dwc3_0: dwc3 { |
| compatible = "snps,dwc3"; |
| reg = <0x12000000 0x10000>; |
| interrupts = <0 72 0>; |
| phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| }; |
| }; |
| |
| usbdrd_phy0: phy@12100000 { |
| compatible = "samsung,exynos5420-usbdrd-phy"; |
| reg = <0x12100000 0x100>; |
| clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>; |
| clock-names = "phy", "ref"; |
| samsung,pmu-syscon = <&pmu_system_controller>; |
| #phy-cells = <1>; |
| }; |
| |
| usbdrd3_1: usb@12400000 { |
| compatible = "samsung,exynos5250-dwusb3"; |
| clocks = <&clock CLK_USBD301>; |
| clock-names = "usbdrd30"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| usbdrd_dwc3_1: dwc3 { |
| compatible = "snps,dwc3"; |
| reg = <0x12400000 0x10000>; |
| interrupts = <0 73 0>; |
| phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| }; |
| }; |
| |
| usbdrd_phy1: phy@12500000 { |
| compatible = "samsung,exynos5420-usbdrd-phy"; |
| reg = <0x12500000 0x100>; |
| clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>; |
| clock-names = "phy", "ref"; |
| samsung,pmu-syscon = <&pmu_system_controller>; |
| #phy-cells = <1>; |
| }; |
| |
| usbhost2: usb@12110000 { |
| compatible = "samsung,exynos4210-ehci"; |
| reg = <0x12110000 0x100>; |
| interrupts = <0 71 0>; |
| |
| clocks = <&clock CLK_USBH20>; |
| clock-names = "usbhost"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| port@0 { |
| reg = <0>; |
| phys = <&usb2_phy 1>; |
| }; |
| }; |
| |
| usbhost1: usb@12120000 { |
| compatible = "samsung,exynos4210-ohci"; |
| reg = <0x12120000 0x100>; |
| interrupts = <0 71 0>; |
| |
| clocks = <&clock CLK_USBH20>; |
| clock-names = "usbhost"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| port@0 { |
| reg = <0>; |
| phys = <&usb2_phy 1>; |
| }; |
| }; |
| |
| usb2_phy: phy@12130000 { |
| compatible = "samsung,exynos5250-usb2-phy"; |
| reg = <0x12130000 0x100>; |
| clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>; |
| clock-names = "phy", "ref"; |
| #phy-cells = <1>; |
| samsung,sysreg-phandle = <&sysreg_system_controller>; |
| samsung,pmureg-phandle = <&pmu_system_controller>; |
| }; |
| }; |
