blob: 4e36d6e2f7b6b613c0805dc8c7038f798930ac6f [file] [log] [blame]
Qualcomm's SPMI PMIC current ADC
QPNP PMIC current ADC (IADC) provides interface to clients to read current.
A 16 bit ADC is used for current measurements. IADC can measure the current
through an external resistor (channel 1) or internal (built-in) resistor
(channel 0). When using an external resistor it is to be described by
qcom,external-resistor-micro-ohms property.
IADC node:
- compatible:
Usage: required
Value type: <string>
Definition: Should contain "qcom,spmi-iadc".
- reg:
Usage: required
Value type: <prop-encoded-array>
Definition: IADC base address and length in the SPMI PMIC register map
- interrupts:
Usage: optional
Value type: <prop-encoded-array>
Definition: End of ADC conversion.
- qcom,external-resistor-micro-ohms:
Usage: optional
Value type: <u32>
Definition: Sense resister value in micro Ohm.
If not defined value of 10000 micro Ohms will be used.
Example:
/* IADC node */
pmic_iadc: iadc@3600 {
compatible = "qcom,spmi-iadc";
reg = <0x3600 0x100>;
interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
qcom,external-resistor-micro-ohms = <10000>;
#io-channel-cells = <1>;
};
/* IIO client node */
bat {
io-channels = <&pmic_iadc 0>;
io-channel-names = "iadc";
};