ACT8865 regulator
-------------------

Required properties:
- compatible: "active-semi,act8865"
- reg: I2C slave address

Any standard regulator properties can be used to configure the single regulator.

The valid names for regulators are:
	DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.

Example:
--------

		i2c1: i2c@f0018000 {
			pmic: act8865@5b {
				compatible = "active-semi,act8865";
				reg = <0x5b>;
				status = "disabled";

				regulators {
					vcc_1v8_reg: DCDC_REG1 {
						regulator-name = "VCC_1V8";
						regulator-min-microvolt = <1800000>;
						regulator-max-microvolt = <1800000>;
						regulator-always-on;
					};

					vcc_1v2_reg: DCDC_REG2 {
						regulator-name = "VCC_1V2";
						regulator-min-microvolt = <1100000>;
						regulator-max-microvolt = <1300000>;
						regulator-suspend-mem-microvolt = <1150000>;
						regulator-suspend-standby-microvolt = <1150000>;
						regulator-always-on;
					};

					vcc_3v3_reg: DCDC_REG3 {
						regulator-name = "VCC_3V3";
						regulator-min-microvolt = <3300000>;
						regulator-max-microvolt = <3300000>;
						regulator-always-on;
					};

					vddana_reg: LDO_REG1 {
						regulator-name = "VDDANA";
						regulator-min-microvolt = <3300000>;
						regulator-max-microvolt = <3300000>;
						regulator-always-on;
					};

					vddfuse_reg: LDO_REG2 {
						regulator-name = "FUSE_2V5";
						regulator-min-microvolt = <2500000>;
						regulator-max-microvolt = <2500000>;
					};
				};
			};
		};