#include<linux/kernel.h>
#include<linux/module.h>
#include<linux/errno.h>
#include<linux/string.h>
#include<linux/mm.h>
#include<linux/slab.h>
#include<linux/delay.h>
#include<linux/fb.h>
#include<linux/ioport.h>
#include<linux/init.h>
#include<linux/pci.h>
#include<linux/mm_types.h>
#include<linux/vmalloc.h>
#include<linux/pagemap.h>
#include<linux/screen_info.h>
#include<linux/vmalloc.h>
#include<linux/pagemap.h>
#include <linux/console.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
#include <asm/fb.h>
#include "sm750.h"
#include "sm750_hw.h"
#include "sm750_accel.h"
#include "sm750_cursor.h"

#include "modedb.h"

int smi_indent = 0;


/*
 * #ifdef __BIG_ENDIAN
 * ssize_t lynxfb_ops_write(struct fb_info *info, const char __user *buf,
 * size_t count, loff_t *ppos);
 * ssize_t lynxfb_ops_read(struct fb_info *info, char __user *buf,
 * size_t count, loff_t *ppos);
 * #endif
 */

typedef void (*PROC_SPEC_SETUP)(struct lynx_share*, char *);
typedef int (*PROC_SPEC_MAP)(struct lynx_share*, struct pci_dev*);
typedef int (*PROC_SPEC_INITHW)(struct lynx_share*, struct pci_dev*);


/* common var for all device */
static int g_hwcursor = 1;
static int g_noaccel;
#ifdef CONFIG_MTRR
static int g_nomtrr;
#endif
static const char *g_fbmode[] = {NULL, NULL};
static const char *g_def_fbmode = "800x600-16@60";
static char *g_settings = NULL;
static int g_dualview;
static char *g_option = NULL;


static const struct fb_videomode lynx750_ext[] = {
	/*	1024x600-60 VESA	[1.71:1] */
	{NULL,  60, 1024, 600, 20423, 144,  40, 18, 1, 104, 3,
	 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
	 FB_VMODE_NONINTERLACED},

	/*	1024x600-70 VESA */
	{NULL,  70, 1024, 600, 17211, 152,  48, 21, 1, 104, 3,
	 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
	 FB_VMODE_NONINTERLACED},

	/*	1024x600-75 VESA */
	{NULL,  75, 1024, 600, 15822, 160,  56, 23, 1, 104, 3,
	 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
	 FB_VMODE_NONINTERLACED},

	/*	1024x600-85 VESA */
	{NULL,  85, 1024, 600, 13730, 168,  56, 26, 1, 112, 3,
	 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
	 FB_VMODE_NONINTERLACED},

	/*	720x480	*/
	{NULL, 60,  720,  480,  37427, 88,   16, 13, 1,   72,  3,
	 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
	 FB_VMODE_NONINTERLACED},

	/*	1280x720		[1.78:1]	*/
	{NULL, 60,  1280,  720,  13426, 162, 86, 22, 1,  136, 3,
	 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
	 FB_VMODE_NONINTERLACED},

	/*	1280x768@60 */
	{NULL, 60, 1280, 768, 12579, 192, 64, 20, 3, 128, 7,
	 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
	 FB_VMODE_NONINTERLACED},

	{NULL, 60, 1360, 768, 11804, 208, 64, 23, 1, 144, 3,
	 FB_SYNC_HOR_HIGH_ACT|FB_VMODE_NONINTERLACED},

	/*	1360 x 768	[1.77083:1]	*/
	{NULL,  60, 1360, 768, 11804, 208,  64, 23, 1, 144, 3,
	 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
	 FB_VMODE_NONINTERLACED},

	/*	1368 x 768      [1.78:1]	*/
	{NULL, 60,  1368,  768,  11647, 216, 72, 23, 1,  144, 3,
	 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
	 FB_VMODE_NONINTERLACED},

	/*	1440 x 900		[16:10]	*/
	{NULL, 60, 1440, 900, 9392, 232, 80, 28, 1, 152, 3,
	 FB_SYNC_VERT_HIGH_ACT,
	 FB_VMODE_NONINTERLACED},

	/*	1440x960		[15:10]	*/
	{NULL, 60, 1440, 960, 8733, 240, 88, 30, 1, 152, 3,
	 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
	 FB_VMODE_NONINTERLACED},

	/*	1920x1080	[16:9]	*/
	{NULL, 60, 1920, 1080, 6734, 148, 88, 41, 1, 44, 3,
	 FB_SYNC_VERT_HIGH_ACT,
	 FB_VMODE_NONINTERLACED},
};


/* no hardware cursor supported under version 2.6.10, kernel bug */
static int lynxfb_ops_cursor(struct fb_info *info, struct fb_cursor *fbcursor)
{
	struct lynxfb_par *par;
	struct lynxfb_crtc *crtc;
	struct lynx_cursor *cursor;

	par = info->par;
	crtc = &par->crtc;
	cursor = &crtc->cursor;

	if (fbcursor->image.width > cursor->maxW ||
	   fbcursor->image.height > cursor->maxH ||
	   fbcursor->image.depth > 1) {
		return -ENXIO;
	}

	cursor->disable(cursor);
	if (fbcursor->set & FB_CUR_SETSIZE)
		cursor->setSize(cursor,
				fbcursor->image.width,
				fbcursor->image.height);

	if (fbcursor->set & FB_CUR_SETPOS)
		cursor->setPos(cursor,
			       fbcursor->image.dx - info->var.xoffset,
			       fbcursor->image.dy - info->var.yoffset);

	if (fbcursor->set & FB_CUR_SETCMAP) {
		/* get the 16bit color of kernel means */
		u16 fg, bg;

		fg = ((info->cmap.red[fbcursor->image.fg_color] & 0xf800))|
		      ((info->cmap.green[fbcursor->image.fg_color] & 0xfc00) >> 5)|
		      ((info->cmap.blue[fbcursor->image.fg_color] & 0xf800) >> 11);

		bg = ((info->cmap.red[fbcursor->image.bg_color] & 0xf800))|
		      ((info->cmap.green[fbcursor->image.bg_color] & 0xfc00) >> 5)|
		      ((info->cmap.blue[fbcursor->image.bg_color] & 0xf800) >> 11);

		cursor->setColor(cursor, fg, bg);
	}


	if (fbcursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) {
		cursor->setData(cursor,
				fbcursor->rop,
				fbcursor->image.data,
				fbcursor->mask);
	}

	if (fbcursor->enable)
		cursor->enable(cursor);

	return 0;
}

static void lynxfb_ops_fillrect(struct fb_info *info,
				const struct fb_fillrect *region)
{
	struct lynxfb_par *par;
	struct lynx_share *share;
	unsigned int base, pitch, Bpp, rop;
	u32 color;

	if (info->state != FBINFO_STATE_RUNNING)
		return;

	par = info->par;
	share = par->share;

	/* each time 2d function begin to work,below three variable always need
	 * be set, seems we can put them together in some place  */
	base = par->crtc.oScreen;
	pitch = info->fix.line_length;
	Bpp = info->var.bits_per_pixel >> 3;

	color = (Bpp == 1)?region->color:((u32 *)info->pseudo_palette)[region->color];
	rop = (region->rop != ROP_COPY) ? HW_ROP2_XOR:HW_ROP2_COPY;

	/*
	 * If not use spin_lock,system will die if user load driver
	 * and immediatly unload driver frequently (dual)
	 */
	if (share->dual)
		spin_lock(&share->slock);

	share->accel.de_fillrect(&share->accel,
				 base, pitch, Bpp,
				 region->dx, region->dy,
				 region->width, region->height,
				 color, rop);
	if (share->dual)
		spin_unlock(&share->slock);
}

static void lynxfb_ops_copyarea(struct fb_info *info,
				const struct fb_copyarea *region)
{
	struct lynxfb_par *par;
	struct lynx_share *share;
	unsigned int base, pitch, Bpp;

	par = info->par;
	share = par->share;

	/* each time 2d function begin to work,below three variable always need
	 * be set, seems we can put them together in some place  */
	base = par->crtc.oScreen;
	pitch = info->fix.line_length;
	Bpp = info->var.bits_per_pixel >> 3;

	/*
	 * If not use spin_lock, system will die if user load driver
	 * and immediatly unload driver frequently (dual)
	 */
	if (share->dual)
		spin_lock(&share->slock);

	share->accel.de_copyarea(&share->accel,
				 base, pitch, region->sx, region->sy,
				 base, pitch, Bpp, region->dx, region->dy,
				 region->width, region->height, HW_ROP2_COPY);
	if (share->dual)
		spin_unlock(&share->slock);
}

static void lynxfb_ops_imageblit(struct fb_info *info,
				 const struct fb_image *image)
{
	unsigned int base, pitch, Bpp;
	unsigned int fgcol, bgcol;
	struct lynxfb_par *par;
	struct lynx_share *share;

	par = info->par;
	share = par->share;
	/* each time 2d function begin to work,below three variable always need
	 * be set, seems we can put them together in some place  */
	base = par->crtc.oScreen;
	pitch = info->fix.line_length;
	Bpp = info->var.bits_per_pixel >> 3;

	if (image->depth == 1) {
		if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
		    info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
			fgcol = ((u32 *)info->pseudo_palette)[image->fg_color];
			bgcol = ((u32 *)info->pseudo_palette)[image->bg_color];
		} else {
			fgcol = image->fg_color;
			bgcol = image->bg_color;
		}
		goto _do_work;
	}
	return;
_do_work:
	/*
	 * If not use spin_lock, system will die if user load driver
	 * and immediatly unload driver frequently (dual)
	 */
	if (share->dual)
		spin_lock(&share->slock);

	share->accel.de_imageblit(&share->accel,
				  image->data, image->width>>3, 0,
				  base, pitch, Bpp,
				  image->dx, image->dy,
				  image->width, image->height,
				  fgcol, bgcol, HW_ROP2_COPY);
	if (share->dual)
		spin_unlock(&share->slock);
}

static int lynxfb_ops_pan_display(struct fb_var_screeninfo *var,
				  struct fb_info *info)
{
	struct lynxfb_par *par;
	struct lynxfb_crtc *crtc;
	int ret;


	if (!info)
		return -EINVAL;

	ret = 0;
	par = info->par;
	crtc = &par->crtc;
	ret = crtc->proc_panDisplay(crtc, var, info);

	return ret;
}

static int lynxfb_ops_set_par(struct fb_info *info)
{
	struct lynxfb_par *par;
	struct lynx_share *share;
	struct lynxfb_crtc *crtc;
	struct lynxfb_output *output;
	struct fb_var_screeninfo *var;
	struct fb_fix_screeninfo *fix;
	int ret;
	unsigned int line_length;

	if (!info)
		return -EINVAL;

	ret = 0;
	par = info->par;
	share = par->share;
	crtc = &par->crtc;
	output = &par->output;
	var = &info->var;
	fix = &info->fix;

	/* fix structur is not so FIX ... */
	line_length = var->xres_virtual * var->bits_per_pixel / 8;
	line_length = PADDING(crtc->line_pad, line_length);
	fix->line_length = line_length;
	pr_err("fix->line_length = %d\n", fix->line_length);

	/* var->red,green,blue,transp are need to be set by driver
	 * and these data should be set before setcolreg routine
	 * */

	switch (var->bits_per_pixel) {
	case 8:
		fix->visual = FB_VISUAL_PSEUDOCOLOR;
		var->red.offset = 0;
		var->red.length = 8;
		var->green.offset = 0;
		var->green.length = 8;
		var->blue.offset = 0;
		var->blue.length = 8;
		var->transp.length = 0;
		var->transp.offset = 0;
		break;
	case 16:
		var->red.offset = 11;
		var->red.length = 5;
		var->green.offset = 5;
		var->green.length = 6;
		var->blue.offset = 0;
		var->blue.length = 5;
		var->transp.length = 0;
		var->transp.offset = 0;
		fix->visual = FB_VISUAL_TRUECOLOR;
		break;
	case 24:
	case 32:
		var->red.offset = 16;
		var->red.length = 8;
		var->green.offset = 8;
		var->green.length = 8;
		var->blue.offset = 0;
		var->blue.length = 8;
		fix->visual = FB_VISUAL_TRUECOLOR;
		break;
	default:
		ret = -EINVAL;
		break;
	}
	var->height = var->width = -1;
	var->accel_flags = 0;/*FB_ACCELF_TEXT;*/

	if (ret) {
		pr_err("pixel bpp format not satisfied\n.");
		return ret;
	}
	ret = crtc->proc_setMode(crtc, var, fix);
	if (!ret)
		ret = output->proc_setMode(output, var, fix);
	return ret;
}

static inline unsigned int chan_to_field(unsigned int chan,
					 struct fb_bitfield *bf)
{
	chan &= 0xffff;
	chan >>= 16 - bf->length;
	return chan << bf->offset;
}

#ifdef CONFIG_PM
static int lynxfb_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
	struct fb_info *info;
	struct lynx_share *share;
	int ret;

	if (mesg.event == pdev->dev.power.power_state.event)
		return 0;

	ret = 0;
	share = pci_get_drvdata(pdev);
	switch (mesg.event) {
	case PM_EVENT_FREEZE:
	case PM_EVENT_PRETHAW:
		pdev->dev.power.power_state = mesg;
		return 0;
	}

	console_lock();
	if (mesg.event & PM_EVENT_SLEEP) {
		info = share->fbinfo[0];
		if (info)
			/* 1 means do suspend */
			fb_set_suspend(info, 1);
		info = share->fbinfo[1];
		if (info)
			/* 1 means do suspend */
			fb_set_suspend(info, 1);

		ret = pci_save_state(pdev);
		if (ret) {
			pr_err("error:%d occurred in pci_save_state\n", ret);
			return ret;
		}

		/* set chip to sleep mode */
		if (share->suspend)
			(*share->suspend)(share);

		pci_disable_device(pdev);
		ret = pci_set_power_state(pdev, pci_choose_state(pdev, mesg));
		if (ret) {
			pr_err("error:%d occurred in pci_set_power_state\n", ret);
			return ret;
		}
	}

	pdev->dev.power.power_state = mesg;
	console_unlock();
	return ret;
}

static int lynxfb_resume(struct pci_dev *pdev)
{
	struct fb_info *info;
	struct lynx_share *share;

	struct lynxfb_par *par;
	struct lynxfb_crtc *crtc;
	struct lynx_cursor *cursor;

	int ret;


	ret = 0;
	share = pci_get_drvdata(pdev);

	console_lock();

	ret = pci_set_power_state(pdev, PCI_D0);
	if (ret) {
		pr_err("error:%d occured in pci_set_power_state\n", ret);
		return ret;
	}


	if (pdev->dev.power.power_state.event != PM_EVENT_FREEZE) {
		pci_restore_state(pdev);
		ret = pci_enable_device(pdev);
		if (ret) {
			pr_err("error:%d occured in pci_enable_device\n", ret);
			return ret;
		}
		pci_set_master(pdev);
	}
	if (share->resume)
		(*share->resume)(share);

	hw_sm750_inithw(share, pdev);


	info = share->fbinfo[0];

	if (info) {
		par = info->par;
		crtc = &par->crtc;
		cursor = &crtc->cursor;
		memset_io(cursor->vstart, 0x0, cursor->size);
		memset_io(crtc->vScreen, 0x0, crtc->vidmem_size);
		lynxfb_ops_set_par(info);
		fb_set_suspend(info, 0);
	}

	info = share->fbinfo[1];

	if (info) {
		par = info->par;
		crtc = &par->crtc;
		cursor = &crtc->cursor;
		memset_io(cursor->vstart, 0x0, cursor->size);
		memset_io(crtc->vScreen, 0x0, crtc->vidmem_size);
		lynxfb_ops_set_par(info);
		fb_set_suspend(info, 0);
	}


	console_unlock();
	return ret;
}
#endif

static int lynxfb_ops_check_var(struct fb_var_screeninfo *var,
				struct fb_info *info)
{
	struct lynxfb_par *par;
	struct lynxfb_crtc *crtc;
	struct lynxfb_output *output;
	struct lynx_share *share;
	int ret;
	resource_size_t request;


	par = info->par;
	crtc = &par->crtc;
	output = &par->output;
	share = par->share;
	ret = 0;

	pr_debug("check var:%dx%d-%d\n",
		 var->xres,
		 var->yres,
		 var->bits_per_pixel);


	switch (var->bits_per_pixel) {
	case 8:
	case 16:
	case 24: /* support 24 bpp for only lynx712/722/720 */
	case 32:
		break;
	default:
		pr_err("bpp %d not supported\n", var->bits_per_pixel);
		ret = -EINVAL;
		goto exit;
	}

	switch (var->bits_per_pixel) {
	case 8:
		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
		var->red.offset = 0;
		var->red.length = 8;
		var->green.offset = 0;
		var->green.length = 8;
		var->blue.offset = 0;
		var->blue.length = 8;
		var->transp.length = 0;
		var->transp.offset = 0;
		break;
	case 16:
		var->red.offset = 11;
		var->red.length = 5;
		var->green.offset = 5;
		var->green.length = 6;
		var->blue.offset = 0;
		var->blue.length = 5;
		var->transp.length = 0;
		var->transp.offset = 0;
		info->fix.visual = FB_VISUAL_TRUECOLOR;
		break;
	case 24:
	case 32:
		var->red.offset = 16;
		var->red.length = 8;
		var->green.offset = 8;
		var->green.length = 8;
		var->blue.offset = 0;
		var->blue.length = 8;
		info->fix.visual = FB_VISUAL_TRUECOLOR;
		break;
	default:
		ret = -EINVAL;
		break;
	}
	var->height = var->width = -1;
	var->accel_flags = 0;/* FB_ACCELF_TEXT; */

	/* check if current fb's video memory big enought to hold the onscreen*/
	request = var->xres_virtual * (var->bits_per_pixel >> 3);
	/* defaulty crtc->channel go with par->index */

	request = PADDING(crtc->line_pad, request);
	request = request * var->yres_virtual;
	if (crtc->vidmem_size < request) {
		pr_err("not enough video memory for mode\n");
		return -ENOMEM;
	}

	ret = output->proc_checkMode(output, var);
	if (!ret)
		ret = crtc->proc_checkMode(crtc, var);
exit:
	return ret;
}


static int lynxfb_ops_setcolreg(unsigned regno,
				unsigned red,
				unsigned green,
				unsigned blue,
				unsigned transp,
				struct fb_info *info)
{
	struct lynxfb_par *par;
	struct lynxfb_crtc *crtc;
	struct fb_var_screeninfo *var;
	int ret;

	par = info->par;
	crtc = &par->crtc;
	var = &info->var;
	ret = 0;

	if (regno > 256) {
		pr_err("regno = %d\n", regno);
		return -EINVAL;
	}

	if (info->var.grayscale)
		red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;

	if (var->bits_per_pixel == 8 &&
	    info->fix.visual == FB_VISUAL_PSEUDOCOLOR) {
		red >>= 8;
		green >>= 8;
		blue >>= 8;
		ret = crtc->proc_setColReg(crtc, regno, red, green, blue);
		goto exit;
	}


	if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 256) {
		u32 val;

		if (var->bits_per_pixel == 16 ||
		    var->bits_per_pixel == 32 ||
		    var->bits_per_pixel == 24) {
			val = chan_to_field(red, &var->red);
			val |= chan_to_field(green, &var->green);
			val |= chan_to_field(blue, &var->blue);
			par->pseudo_palette[regno] = val;
			goto exit;
		}
	}

	ret = -EINVAL;

exit:
	return ret;
}

static int lynxfb_ops_blank(int blank, struct fb_info *info)
{
	struct lynxfb_par *par;
	struct lynxfb_output *output;

	pr_debug("blank = %d.\n", blank);
	par = info->par;
	output = &par->output;
	return output->proc_setBLANK(output, blank);
}

static int sm750fb_set_drv(struct lynxfb_par *par)
{
	int ret;
	struct lynx_share *share;
	struct sm750_share *spec_share;
	struct lynxfb_output *output;
	struct lynxfb_crtc *crtc;

	ret = 0;

	share = par->share;
	spec_share = container_of(share, struct sm750_share, share);
	output = &par->output;
	crtc = &par->crtc;

	crtc->vidmem_size = (share->dual)?share->vidmem_size>>1:share->vidmem_size;
	/* setup crtc and output member */
	spec_share->hwCursor = g_hwcursor;

	crtc->proc_setMode = hw_sm750_crtc_setMode;
	crtc->proc_checkMode = hw_sm750_crtc_checkMode;
	crtc->proc_setColReg = hw_sm750_setColReg;
	crtc->proc_panDisplay = hw_sm750_pan_display;
	crtc->clear = hw_sm750_crtc_clear;
	crtc->line_pad = 16;
	crtc->xpanstep = 8;
	crtc->ypanstep = 1;
	crtc->ywrapstep = 0;

	output->proc_setMode = hw_sm750_output_setMode;
	output->proc_checkMode = hw_sm750_output_checkMode;

	output->proc_setBLANK = (share->revid == SM750LE_REVISION_ID)?hw_sm750le_setBLANK:hw_sm750_setBLANK;
	output->clear = hw_sm750_output_clear;
	/* chip specific phase */
	share->accel.de_wait = (share->revid == SM750LE_REVISION_ID)?hw_sm750le_deWait : hw_sm750_deWait;
	switch (spec_share->state.dataflow) {
	case sm750_simul_pri:
		output->paths = sm750_pnc;
		crtc->channel = sm750_primary;
		crtc->oScreen = 0;
		crtc->vScreen = share->pvMem;
		pr_info("use simul primary mode\n");
		break;
	case sm750_simul_sec:
		output->paths = sm750_pnc;
		crtc->channel = sm750_secondary;
		crtc->oScreen = 0;
		crtc->vScreen = share->pvMem;
		break;
	case sm750_dual_normal:
		if (par->index == 0) {
			output->paths = sm750_panel;
			crtc->channel = sm750_primary;
			crtc->oScreen = 0;
			crtc->vScreen = share->pvMem;
		} else {
			output->paths = sm750_crt;
			crtc->channel = sm750_secondary;
			/* not consider of padding stuffs for oScreen,need fix */
			crtc->oScreen = (share->vidmem_size >> 1);
			crtc->vScreen = share->pvMem + crtc->oScreen;
		}
		break;
	case sm750_dual_swap:
		if (par->index == 0) {
			output->paths = sm750_panel;
			crtc->channel = sm750_secondary;
			crtc->oScreen = 0;
			crtc->vScreen = share->pvMem;
		} else {
			output->paths = sm750_crt;
			crtc->channel = sm750_primary;
			/* not consider of padding stuffs for oScreen,need fix */
			crtc->oScreen = (share->vidmem_size >> 1);
			crtc->vScreen = share->pvMem + crtc->oScreen;
		}
		break;
	default:
		ret = -EINVAL;
	}

	return ret;
}

static struct fb_ops lynxfb_ops = {
	.owner = THIS_MODULE,
	.fb_check_var =  lynxfb_ops_check_var,
	.fb_set_par = lynxfb_ops_set_par,
	.fb_setcolreg = lynxfb_ops_setcolreg,
	.fb_blank = lynxfb_ops_blank,
	.fb_fillrect = cfb_fillrect,
	.fb_imageblit = cfb_imageblit,
	.fb_copyarea = cfb_copyarea,
	/* cursor */
	.fb_cursor = lynxfb_ops_cursor,
};


static int lynxfb_set_fbinfo(struct fb_info *info, int index)
{
	int i;
	struct lynxfb_par *par;
	struct lynx_share *share;
	struct lynxfb_crtc *crtc;
	struct lynxfb_output *output;
	struct fb_var_screeninfo *var;
	struct fb_fix_screeninfo *fix;

	const struct fb_videomode *pdb[] = {
		lynx750_ext, NULL, vesa_modes,
	};
	int cdb[] = {ARRAY_SIZE(lynx750_ext), 0, VESA_MODEDB_SIZE};
	static const char *mdb_desc[] = {
		"driver prepared modes",
		"kernel prepared default modedb",
		"kernel HELPERS prepared vesa_modes",
	};


	static const char *fixId[2] = {
		"sm750_fb1", "sm750_fb2",
	};

	int ret, line_length;

	ret = 0;
	par = (struct lynxfb_par *)info->par;
	share = par->share;
	crtc = &par->crtc;
	output = &par->output;
	var = &info->var;
	fix = &info->fix;

	/* set index */
	par->index = index;
	output->channel = &crtc->channel;
	sm750fb_set_drv(par);
	lynxfb_ops.fb_pan_display = lynxfb_ops_pan_display;


	/* set current cursor variable and proc pointer,
	 * must be set after crtc member initialized */
	crtc->cursor.offset = crtc->oScreen + crtc->vidmem_size - 1024;
	crtc->cursor.mmio = share->pvReg + 0x800f0 + (int)crtc->channel * 0x140;

	pr_info("crtc->cursor.mmio = %p\n", crtc->cursor.mmio);
	crtc->cursor.maxH = crtc->cursor.maxW = 64;
	crtc->cursor.size = crtc->cursor.maxH*crtc->cursor.maxW*2/8;
	crtc->cursor.disable = hw_cursor_disable;
	crtc->cursor.enable = hw_cursor_enable;
	crtc->cursor.setColor = hw_cursor_setColor;
	crtc->cursor.setPos = hw_cursor_setPos;
	crtc->cursor.setSize = hw_cursor_setSize;
	crtc->cursor.setData = hw_cursor_setData;
	crtc->cursor.vstart = share->pvMem + crtc->cursor.offset;


	crtc->cursor.share = share;
		memset_io(crtc->cursor.vstart, 0, crtc->cursor.size);
	if (!g_hwcursor) {
		lynxfb_ops.fb_cursor = NULL;
		crtc->cursor.disable(&crtc->cursor);
	}


	/* set info->fbops, must be set before fb_find_mode */
	if (!share->accel_off) {
		/* use 2d acceleration */
		lynxfb_ops.fb_fillrect = lynxfb_ops_fillrect;
		lynxfb_ops.fb_copyarea = lynxfb_ops_copyarea;
		lynxfb_ops.fb_imageblit = lynxfb_ops_imageblit;
	}
	info->fbops = &lynxfb_ops;

	if (!g_fbmode[index]) {
		g_fbmode[index] = g_def_fbmode;
		if (index)
			g_fbmode[index] = g_fbmode[0];
	}


	for (i = 0; i < 3; i++) {

		ret = fb_find_mode(var, info, g_fbmode[index],
				   pdb[i], cdb[i], NULL, 8);

		if (ret == 1) {
			pr_info("success! use specified mode:%s in %s\n",
				g_fbmode[index],
				mdb_desc[i]);
			break;
		} else if (ret == 2) {
			pr_warn("use specified mode:%s in %s,with an ignored refresh rate\n",
				g_fbmode[index],
				mdb_desc[i]);
			break;
		} else if (ret == 3) {
			pr_warn("wanna use default mode\n");
			/*break;*/
		} else if (ret == 4) {
			pr_warn("fall back to any valid mode\n");
		} else {
			pr_warn("ret = %d,fb_find_mode failed,with %s\n",
				ret,
				mdb_desc[i]);
		}
	}

	/* some member of info->var had been set by fb_find_mode */

	pr_info("Member of info->var is :\n\
		xres=%d\n\
		yres=%d\n\
		xres_virtual=%d\n\
		yres_virtual=%d\n\
		xoffset=%d\n\
		yoffset=%d\n\
		bits_per_pixel=%d\n \
		...\n",
		var->xres,
		var->yres,
		var->xres_virtual,
		var->yres_virtual,
		var->xoffset,
		var->yoffset,
		var->bits_per_pixel);

	/* set par */
	par->info = info;

	/* set info */
	line_length = PADDING(crtc->line_pad,
			      (var->xres_virtual * var->bits_per_pixel/8));

	info->pseudo_palette = &par->pseudo_palette[0];
	info->screen_base = crtc->vScreen;
	pr_debug("screen_base vaddr = %p\n", info->screen_base);
	info->screen_size = line_length * var->yres_virtual;
	info->flags = FBINFO_FLAG_DEFAULT|0;

	/* set info->fix */
	fix->type = FB_TYPE_PACKED_PIXELS;
	fix->type_aux = 0;
	fix->xpanstep = crtc->xpanstep;
	fix->ypanstep = crtc->ypanstep;
	fix->ywrapstep = crtc->ywrapstep;
	fix->accel = FB_ACCEL_SMI;

	strlcpy(fix->id, fixId[index], sizeof(fix->id));


	fix->smem_start = crtc->oScreen + share->vidmem_start;
	pr_info("fix->smem_start = %lx\n", fix->smem_start);
	/* according to mmap experiment from user space application,
	 * fix->mmio_len should not larger than virtual size
	 * (xres_virtual x yres_virtual x ByPP)
	 * Below line maybe buggy when user mmap fb dev node and write
	 * data into the bound over virtual size
	 * */
	fix->smem_len = crtc->vidmem_size;
	pr_info("fix->smem_len = %x\n", fix->smem_len);
	info->screen_size = fix->smem_len;
	fix->line_length = line_length;
	fix->mmio_start = share->vidreg_start;
	pr_info("fix->mmio_start = %lx\n", fix->mmio_start);
	fix->mmio_len = share->vidreg_size;
	pr_info("fix->mmio_len = %x\n", fix->mmio_len);
	switch (var->bits_per_pixel) {
	case 8:
		fix->visual = FB_VISUAL_PSEUDOCOLOR;
		break;
	case 16:
	case 32:
		fix->visual = FB_VISUAL_TRUECOLOR;
		break;
	}

	/* set var */
	var->activate = FB_ACTIVATE_NOW;
	var->accel_flags = 0;
	var->vmode = FB_VMODE_NONINTERLACED;

	pr_debug("#1 show info->cmap : \nstart=%d,len=%d,red=%p,green=%p,blue=%p,transp=%p\n",
		 info->cmap.start, info->cmap.len,
		 info->cmap.red, info->cmap.green, info->cmap.blue,
		 info->cmap.transp);

	ret = fb_alloc_cmap(&info->cmap, 256, 0);
	if (ret < 0) {
		pr_err("Could not allcate memory for cmap.\n");
		goto exit;
	}

	pr_debug("#2 show info->cmap :\nstart=%d,len=%d,red=%p,green=%p,blue=%p,transp=%p\n",
		 info->cmap.start, info->cmap.len,
		 info->cmap.red, info->cmap.green, info->cmap.blue,
		 info->cmap.transp);

exit:
	lynxfb_ops_check_var(var, info);
	return ret;
}

/*	chip specific g_option configuration routine */
static void sm750fb_setup(struct lynx_share *share, char *src)
{
	struct sm750_share *spec_share;
	char *opt;
#ifdef CAP_EXPENSION
	char *exp_res;
#endif
	int swap;


	spec_share = container_of(share, struct sm750_share, share);
#ifdef CAP_EXPENSIION
	exp_res = NULL;
#endif
	swap = 0;

	spec_share->state.initParm.chip_clk = 0;
	spec_share->state.initParm.mem_clk = 0;
	spec_share->state.initParm.master_clk = 0;
	spec_share->state.initParm.powerMode = 0;
	spec_share->state.initParm.setAllEngOff = 0;
	spec_share->state.initParm.resetMemory = 1;

	/* defaultly turn g_hwcursor on for both view */
	g_hwcursor = 3;

	if (!src || !*src) {
		pr_warn("no specific g_option.\n");
		goto NO_PARAM;
	}

	while ((opt = strsep(&src, ":")) != NULL && *opt != 0) {
		pr_err("opt=%s\n", opt);
		pr_err("src=%s\n", src);

		if (!strncmp(opt, "swap", strlen("swap")))
			swap = 1;
		else if (!strncmp(opt, "nocrt", strlen("nocrt")))
			spec_share->state.nocrt = 1;
		else if (!strncmp(opt, "36bit", strlen("36bit")))
			spec_share->state.pnltype = sm750_doubleTFT;
		else if (!strncmp(opt, "18bit", strlen("18bit")))
			spec_share->state.pnltype = sm750_dualTFT;
		else if (!strncmp(opt, "24bit", strlen("24bit")))
			spec_share->state.pnltype = sm750_24TFT;
#ifdef CAP_EXPANSION
		else if (!strncmp(opt, "exp:", strlen("exp:")))
			exp_res = opt + strlen("exp:");
#endif
		else if (!strncmp(opt, "nohwc0", strlen("nohwc0")))
			g_hwcursor &= ~0x1;
		else if (!strncmp(opt, "nohwc1", strlen("nohwc1")))
			g_hwcursor &= ~0x2;
		else if (!strncmp(opt, "nohwc", strlen("nohwc")))
			g_hwcursor = 0;
		else {
			if (!g_fbmode[0]) {
				g_fbmode[0] = opt;
				pr_info("find fbmode0 : %s\n", g_fbmode[0]);
			} else if (!g_fbmode[1]) {
				g_fbmode[1] = opt;
				pr_info("find fbmode1 : %s\n", g_fbmode[1]);
			} else {
				pr_warn("How many view you wann set?\n");
			}
		}
	}
#ifdef CAP_EXPANSION
	if (getExpRes(exp_res,
		      &spec_share->state.xLCD,
		      &spec_share->state.yLCD)) {
		/* seems exp_res is not valid */
		spec_share->state.xLCD = spec_share->state.yLCD = 0;
	}
#endif

NO_PARAM:
	if (share->revid != SM750LE_REVISION_ID) {
		if (share->dual) {
			if (swap)
				spec_share->state.dataflow = sm750_dual_swap;
			else
				spec_share->state.dataflow = sm750_dual_normal;
		} else {
			if (swap)
				spec_share->state.dataflow = sm750_simul_sec;
			else
				spec_share->state.dataflow = sm750_simul_pri;
		}
	} else {
		/* SM750LE only have one crt channel */
		spec_share->state.dataflow = sm750_simul_sec;
		/* sm750le do not have complex attributes */
		spec_share->state.nocrt = 0;
	}
}

static int lynxfb_pci_probe(struct pci_dev *pdev,
			    const struct pci_device_id * ent)
{
	struct fb_info *info[] = {NULL, NULL};
	struct lynx_share *share = NULL;

	struct sm750_share *spec_share = NULL;
	size_t spec_offset = 0;
	int fbidx;


	/* enable device */
	if (pci_enable_device(pdev)) {
		pr_err("can not enable device.\n");
		goto err_enable;
	}

	/* though offset of share in sm750_share is 0,
	 * we use this marcro as the same */
	spec_offset = offsetof(struct sm750_share, share);

	spec_share = kzalloc(sizeof(*spec_share), GFP_KERNEL);
	if (!spec_share) {
		pr_err("Could not allocate memory for share.\n");
		goto err_share;
	}

	/* setting share structure */
	share = (struct lynx_share *)(&(spec_share->share));
	share->fbinfo[0] = share->fbinfo[1] = NULL;
	share->devid = pdev->device;
	share->revid = pdev->revision;

	pr_info("share->revid = %02x\n", share->revid);
	share->pdev = pdev;
#ifdef CONFIG_MTRR
	share->mtrr_off = g_nomtrr;
	share->mtrr.vram = 0;
	share->mtrr.vram_added = 0;
#endif
	share->accel_off = g_noaccel;
	share->dual = g_dualview;
	spin_lock_init(&share->slock);

	if (!share->accel_off) {
		/* hook deInit and 2d routines, notes that below hw_xxx
		 * routine can work on most of lynx chips
		 * if some chip need specific function,
		 * please hook it in smXXX_set_drv routine */
		share->accel.de_init = hw_de_init;
		share->accel.de_fillrect = hw_fillrect;
		share->accel.de_copyarea = hw_copyarea;
		share->accel.de_imageblit = hw_imageblit;
		pr_info("enable 2d acceleration\n");
	} else {
		pr_info("disable 2d acceleration\n");
	}

	/* call chip specific setup routine  */
	sm750fb_setup(share, g_settings);

	/* call chip specific mmap routine */
	if (hw_sm750_map(share, pdev)) {
		pr_err("Memory map failed\n");
		goto err_map;
	}

#ifdef CONFIG_MTRR
	if (!share->mtrr_off) {
		pr_info("enable mtrr\n");
		share->mtrr.vram = mtrr_add(share->vidmem_start,
					    share->vidmem_size,
					    MTRR_TYPE_WRCOMB, 1);

		if (share->mtrr.vram < 0) {
			/* don't block driver with the failure of MTRR */
			pr_err("Unable to setup MTRR.\n");
		} else {
			share->mtrr.vram_added = 1;
			pr_info("MTRR added succesfully\n");
		}
	}
#endif

	memset_io(share->pvMem, 0, share->vidmem_size);

	pr_info("sm%3x mmio address = %p\n", share->devid, share->pvReg);

	pci_set_drvdata(pdev, share);

	/* call chipInit routine */
	hw_sm750_inithw(share, pdev);

	/* allocate frame buffer info structor according to g_dualview */
	fbidx = 0;
ALLOC_FB:
	info[fbidx] = framebuffer_alloc(sizeof(struct lynxfb_par), &pdev->dev);
	if (!info[fbidx]) {
		pr_err("Could not allocate framebuffer #%d.\n", fbidx);
		if (fbidx == 0)
			goto err_info0_alloc;
		else
			goto err_info1_alloc;
	} else {
		struct lynxfb_par *par;
		int errno;

		pr_info("framebuffer #%d alloc okay\n", fbidx);
		share->fbinfo[fbidx] = info[fbidx];
		par = info[fbidx]->par;
		par->share = share;

		/* set fb_info structure */
		if (lynxfb_set_fbinfo(info[fbidx], fbidx)) {
			pr_err("Failed to initial fb_info #%d.\n", fbidx);
			if (fbidx == 0)
				goto err_info0_set;
			else
				goto err_info1_set;
		}

		/* register frame buffer */
		pr_info("Ready to register framebuffer #%d.\n", fbidx);
		errno = register_framebuffer(info[fbidx]);
		if (errno < 0) {
			pr_err("Failed to register fb_info #%d. err %d\n",
			       fbidx,
			       errno);
			if (fbidx == 0)
				goto err_register0;
			else
				goto err_register1;
		}
		pr_info("Accomplished register framebuffer #%d.\n", fbidx);
	}

	/* no dual view by far */
	fbidx++;
	if (share->dual && fbidx < 2)
		goto ALLOC_FB;

	return 0;

err_register1:
err_info1_set:
	framebuffer_release(info[1]);
err_info1_alloc:
	unregister_framebuffer(info[0]);
err_register0:
err_info0_set:
	framebuffer_release(info[0]);
err_info0_alloc:
err_map:
	kfree(spec_share);
err_share:
err_enable:
	return -ENODEV;
}

static void lynxfb_pci_remove(struct pci_dev *pdev)
{
	struct fb_info *info;
	struct lynx_share *share;
	void *spec_share;
	struct lynxfb_par *par;
	int cnt;

	cnt = 2;
	share = pci_get_drvdata(pdev);

	while (cnt-- > 0) {
		info = share->fbinfo[cnt];
		if (!info)
			continue;
		par = info->par;

		unregister_framebuffer(info);
		/* clean crtc & output allocations */
		par->crtc.clear(&par->crtc);
		par->output.clear(&par->output);
		/* release frame buffer */
		framebuffer_release(info);
	}
#ifdef CONFIG_MTRR
	if (share->mtrr.vram_added)
		mtrr_del(share->mtrr.vram,
			 share->vidmem_start,
			 share->vidmem_size);
#endif

	iounmap(share->pvReg);
	iounmap(share->pvMem);
	spec_share = container_of(share, struct sm750_share, share);
	kfree(g_settings);
	kfree(spec_share);
	pci_set_drvdata(pdev, NULL);
}

static int __init lynxfb_setup(char *options)
{
	int len;
	char *opt, *tmp;


	if (!options || !*options) {
		pr_warn("no options.\n");
		return 0;
	}

	pr_info("options:%s\n", options);

	len = strlen(options) + 1;
	g_settings = kzalloc(len, GFP_KERNEL);
	if (!g_settings)
		return -ENOMEM;

	tmp = g_settings;

	/*	Notes:
		char * strsep(char **s,const char * ct);
		@s: the string to be searched
		@ct :the characters to search for

		strsep() updates @options to pointer after the first found token
		it also returns the pointer ahead the token.
		*/
	while ((opt = strsep(&options, ":")) != NULL) {
		/* options that mean for any lynx chips are configured here */
		if (!strncmp(opt, "noaccel", strlen("noaccel")))
			g_noaccel = 1;
#ifdef CONFIG_MTRR
		else if (!strncmp(opt, "nomtrr", strlen("nomtrr")))
			g_nomtrr = 1;
#endif
		else if (!strncmp(opt, "dual", strlen("dual")))
			g_dualview = 1;
		else {
			strcat(tmp, opt);
			tmp += strlen(opt);
			if (options != NULL)
				*tmp++ = ':';
			else
				*tmp++ = 0;
		}
	}

	/* misc g_settings are transport to chip specific routines */
	pr_info("parameter left for chip specific analysis:%s\n", g_settings);
	return 0;
}

static struct pci_device_id smi_pci_table[] = {
	{ PCI_DEVICE(0x126f, 0x0750), },
	{0,}
};

MODULE_DEVICE_TABLE(pci, smi_pci_table);

static struct pci_driver lynxfb_driver = {
	.name =		"sm750fb",
	.id_table =	smi_pci_table,
	.probe =	lynxfb_pci_probe,
	.remove =	lynxfb_pci_remove,
#ifdef CONFIG_PM
	.suspend = lynxfb_suspend,
	.resume = lynxfb_resume,
#endif
};


static int __init lynxfb_init(void)
{
	char *option;
	int ret;

#ifdef MODULE
	option = g_option;
#else
	if (fb_get_options("sm750fb", &option))
		return -ENODEV;
#endif

	lynxfb_setup(option);
	ret = pci_register_driver(&lynxfb_driver);
	return ret;
}
module_init(lynxfb_init);

static void __exit lynxfb_exit(void)
{
	pci_unregister_driver(&lynxfb_driver);
}
module_exit(lynxfb_exit);

module_param(g_option, charp, S_IRUGO);

MODULE_PARM_DESC(g_option,
		 "\n\t\tCommon options:\n"
		 "\t\tnoaccel:disable 2d capabilities\n"
		 "\t\tnomtrr:disable MTRR attribute for video memory\n"
		 "\t\tdualview:dual frame buffer feature enabled\n"
		 "\t\tnohwc:disable hardware cursor\n"
		 "\t\tUsual example:\n"
		 "\t\tinsmod ./sm750fb.ko g_option=\"noaccel,nohwc,1280x1024-8@60\"\n"
		 );

MODULE_AUTHOR("monk liu <monk.liu@siliconmotion.com>");
MODULE_AUTHOR("Sudip Mukherjee <sudip@vectorindia.org>");
MODULE_DESCRIPTION("Frame buffer driver for SM750 chipset");
MODULE_LICENSE("GPL v2");