| /****************************************************************************** |
| * hal_init.c |
| * |
| * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved. |
| * Linux device driver for RTL8192SU |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * Modifications for inclusion into the Linux staging tree are |
| * Copyright(c) 2010 Larry Finger. All rights reserved. |
| * |
| * Contact information: |
| * WLAN FAE <wlanfae@realtek.com>. |
| * Larry Finger <Larry.Finger@lwfinger.net> |
| * |
| ******************************************************************************/ |
| |
| #define _HAL_INIT_C_ |
| |
| #include <linux/usb.h> |
| #include <linux/device.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/firmware.h> |
| #include <linux/module.h> |
| |
| #include "osdep_service.h" |
| #include "drv_types.h" |
| #include "usb_osintf.h" |
| |
| #define FWBUFF_ALIGN_SZ 512 |
| #define MAX_DUMP_FWSZ 49152 /*default = 49152 (48k)*/ |
| |
| static void rtl871x_load_fw_cb(const struct firmware *firmware, void *context) |
| { |
| struct _adapter *padapter = context; |
| |
| complete(&padapter->rtl8712_fw_ready); |
| if (!firmware) { |
| struct usb_device *udev = padapter->dvobjpriv.pusbdev; |
| struct usb_interface *pusb_intf = padapter->pusb_intf; |
| |
| dev_err(&udev->dev, "r8712u: Firmware request failed\n"); |
| usb_put_dev(udev); |
| usb_set_intfdata(pusb_intf, NULL); |
| return; |
| } |
| padapter->fw = firmware; |
| /* firmware available - start netdev */ |
| register_netdev(padapter->pnetdev); |
| } |
| |
| static const char firmware_file[] = "rtlwifi/rtl8712u.bin"; |
| |
| int rtl871x_load_fw(struct _adapter *padapter) |
| { |
| struct device *dev = &padapter->dvobjpriv.pusbdev->dev; |
| int rc; |
| |
| init_completion(&padapter->rtl8712_fw_ready); |
| dev_info(dev, "r8712u: Loading firmware from \"%s\"\n", firmware_file); |
| rc = request_firmware_nowait(THIS_MODULE, 1, firmware_file, dev, |
| GFP_KERNEL, padapter, rtl871x_load_fw_cb); |
| if (rc) |
| dev_err(dev, "r8712u: Firmware request error %d\n", rc); |
| return rc; |
| } |
| MODULE_FIRMWARE("rtlwifi/rtl8712u.bin"); |
| |
| static u32 rtl871x_open_fw(struct _adapter *padapter, const u8 **ppmappedfw) |
| { |
| const struct firmware **praw = &padapter->fw; |
| |
| if (padapter->fw->size > 200000) { |
| dev_err(&padapter->pnetdev->dev, "r8172u: Badfw->size of %d\n", |
| (int)padapter->fw->size); |
| return 0; |
| } |
| *ppmappedfw = (*praw)->data; |
| return (*praw)->size; |
| } |
| |
| static void fill_fwpriv(struct _adapter *padapter, struct fw_priv *pfwpriv) |
| { |
| struct dvobj_priv *pdvobj = &padapter->dvobjpriv; |
| struct registry_priv *pregpriv = &padapter->registrypriv; |
| |
| memset(pfwpriv, 0, sizeof(struct fw_priv)); |
| /* todo: check if needs endian conversion */ |
| pfwpriv->hci_sel = RTL8712_HCI_TYPE_72USB; |
| pfwpriv->usb_ep_num = (u8)pdvobj->nr_endpoint; |
| pfwpriv->bw_40MHz_en = pregpriv->cbw40_enable; |
| switch (pregpriv->rf_config) { |
| case RTL8712_RF_1T1R: |
| pfwpriv->rf_config = RTL8712_RFC_1T1R; |
| break; |
| case RTL8712_RF_2T2R: |
| pfwpriv->rf_config = RTL8712_RFC_2T2R; |
| break; |
| case RTL8712_RF_1T2R: |
| default: |
| pfwpriv->rf_config = RTL8712_RFC_1T2R; |
| } |
| pfwpriv->mp_mode = (pregpriv->mp_mode == 1) ? 1 : 0; |
| pfwpriv->vcsType = pregpriv->vrtl_carrier_sense; /* 0:off 1:on 2:auto */ |
| pfwpriv->vcsMode = pregpriv->vcs_type; /* 1:RTS/CTS 2:CTS to self */ |
| /* default enable turboMode */ |
| pfwpriv->turboMode = ((pregpriv->wifi_test == 1) ? 0 : 1); |
| pfwpriv->lowPowerMode = pregpriv->low_power; |
| } |
| |
| static void update_fwhdr(struct fw_hdr *pfwhdr, const u8 *pmappedfw) |
| { |
| pfwhdr->signature = le16_to_cpu(*(u16 *)pmappedfw); |
| pfwhdr->version = le16_to_cpu(*(u16 *)(pmappedfw+2)); |
| /* define the size of boot loader */ |
| pfwhdr->dmem_size = le32_to_cpu(*(uint *)(pmappedfw+4)); |
| /* define the size of FW in IMEM */ |
| pfwhdr->img_IMEM_size = le32_to_cpu(*(uint *)(pmappedfw+8)); |
| /* define the size of FW in SRAM */ |
| pfwhdr->img_SRAM_size = le32_to_cpu(*(uint *)(pmappedfw+12)); |
| /* define the size of DMEM variable */ |
| pfwhdr->fw_priv_sz = le32_to_cpu(*(uint *)(pmappedfw+16)); |
| } |
| |
| static u8 chk_fwhdr(struct fw_hdr *pfwhdr, u32 ulfilelength) |
| { |
| u32 fwhdrsz, fw_sz; |
| |
| /* check signature */ |
| if ((pfwhdr->signature != 0x8712) && (pfwhdr->signature != 0x8192)) |
| return _FAIL; |
| /* check fw_priv_sze & sizeof(struct fw_priv) */ |
| if (pfwhdr->fw_priv_sz != sizeof(struct fw_priv)) |
| return _FAIL; |
| /* check fw_sz & image_fw_sz */ |
| fwhdrsz = FIELD_OFFSET(struct fw_hdr, fwpriv) + pfwhdr->fw_priv_sz; |
| fw_sz = fwhdrsz + pfwhdr->img_IMEM_size + pfwhdr->img_SRAM_size + |
| pfwhdr->dmem_size; |
| if (fw_sz != ulfilelength) |
| return _FAIL; |
| return _SUCCESS; |
| } |
| |
| static u8 rtl8712_dl_fw(struct _adapter *padapter) |
| { |
| sint i; |
| u8 tmp8, tmp8_a; |
| u16 tmp16; |
| u32 maxlen = 0; /* for compare usage */ |
| uint dump_imem_sz, imem_sz, dump_emem_sz, emem_sz; /* max = 49152; */ |
| struct fw_hdr fwhdr; |
| u32 ulfilelength; /* FW file size */ |
| const u8 *pmappedfw = NULL; |
| u8 *ptmpchar = NULL, *ppayload, *ptr; |
| struct tx_desc *ptx_desc; |
| u32 txdscp_sz = sizeof(struct tx_desc); |
| u8 ret = _FAIL; |
| |
| ulfilelength = rtl871x_open_fw(padapter, &pmappedfw); |
| if (pmappedfw && (ulfilelength > 0)) { |
| update_fwhdr(&fwhdr, pmappedfw); |
| if (chk_fwhdr(&fwhdr, ulfilelength) == _FAIL) |
| return ret; |
| fill_fwpriv(padapter, &fwhdr.fwpriv); |
| /* firmware check ok */ |
| maxlen = (fwhdr.img_IMEM_size > fwhdr.img_SRAM_size) ? |
| fwhdr.img_IMEM_size : fwhdr.img_SRAM_size; |
| maxlen += txdscp_sz; |
| ptmpchar = kmalloc(maxlen + FWBUFF_ALIGN_SZ, GFP_ATOMIC); |
| if (ptmpchar == NULL) |
| return ret; |
| |
| ptx_desc = (struct tx_desc *)(ptmpchar + FWBUFF_ALIGN_SZ - |
| ((addr_t)(ptmpchar) & (FWBUFF_ALIGN_SZ - 1))); |
| ppayload = (u8 *)(ptx_desc) + txdscp_sz; |
| ptr = (u8 *)pmappedfw + FIELD_OFFSET(struct fw_hdr, fwpriv) + |
| fwhdr.fw_priv_sz; |
| /* Download FirmWare */ |
| /* 1. determine IMEM code size and Load IMEM Code Section */ |
| imem_sz = fwhdr.img_IMEM_size; |
| do { |
| memset(ptx_desc, 0, TXDESC_SIZE); |
| if (imem_sz > MAX_DUMP_FWSZ/*49152*/) |
| dump_imem_sz = MAX_DUMP_FWSZ; |
| else { |
| dump_imem_sz = imem_sz; |
| ptx_desc->txdw0 |= cpu_to_le32(BIT(28)); |
| } |
| ptx_desc->txdw0 |= cpu_to_le32(dump_imem_sz & |
| 0x0000ffff); |
| memcpy(ppayload, ptr, dump_imem_sz); |
| r8712_write_mem(padapter, RTL8712_DMA_VOQ, |
| dump_imem_sz + TXDESC_SIZE, |
| (u8 *)ptx_desc); |
| ptr += dump_imem_sz; |
| imem_sz -= dump_imem_sz; |
| } while (imem_sz > 0); |
| i = 10; |
| tmp16 = r8712_read16(padapter, TCR); |
| while (((tmp16 & _IMEM_CODE_DONE) == 0) && (i > 0)) { |
| udelay(10); |
| tmp16 = r8712_read16(padapter, TCR); |
| i--; |
| } |
| if (i == 0 || (tmp16 & _IMEM_CHK_RPT) == 0) |
| goto exit_fail; |
| |
| /* 2.Download EMEM code size and Load EMEM Code Section */ |
| emem_sz = fwhdr.img_SRAM_size; |
| do { |
| memset(ptx_desc, 0, TXDESC_SIZE); |
| if (emem_sz > MAX_DUMP_FWSZ) /* max=48k */ |
| dump_emem_sz = MAX_DUMP_FWSZ; |
| else { |
| dump_emem_sz = emem_sz; |
| ptx_desc->txdw0 |= cpu_to_le32(BIT(28)); |
| } |
| ptx_desc->txdw0 |= cpu_to_le32(dump_emem_sz & |
| 0x0000ffff); |
| memcpy(ppayload, ptr, dump_emem_sz); |
| r8712_write_mem(padapter, RTL8712_DMA_VOQ, |
| dump_emem_sz+TXDESC_SIZE, (u8 *)ptx_desc); |
| ptr += dump_emem_sz; |
| emem_sz -= dump_emem_sz; |
| } while (emem_sz > 0); |
| i = 5; |
| tmp16 = r8712_read16(padapter, TCR); |
| while (((tmp16 & _EMEM_CODE_DONE) == 0) && (i > 0)) { |
| udelay(10); |
| tmp16 = r8712_read16(padapter, TCR); |
| i--; |
| } |
| if (i == 0 || (tmp16 & _EMEM_CHK_RPT) == 0) |
| goto exit_fail; |
| |
| /* 3.Enable CPU */ |
| tmp8 = r8712_read8(padapter, SYS_CLKR); |
| r8712_write8(padapter, SYS_CLKR, tmp8|BIT(2)); |
| tmp8_a = r8712_read8(padapter, SYS_CLKR); |
| if (tmp8_a != (tmp8|BIT(2))) |
| goto exit_fail; |
| |
| tmp8 = r8712_read8(padapter, SYS_FUNC_EN + 1); |
| r8712_write8(padapter, SYS_FUNC_EN+1, tmp8|BIT(2)); |
| tmp8_a = r8712_read8(padapter, SYS_FUNC_EN + 1); |
| if (tmp8_a != (tmp8|BIT(2))) |
| goto exit_fail; |
| |
| r8712_read32(padapter, TCR); |
| |
| /* 4.polling IMEM Ready */ |
| i = 100; |
| tmp16 = r8712_read16(padapter, TCR); |
| while (((tmp16 & _IMEM_RDY) == 0) && (i > 0)) { |
| msleep(20); |
| tmp16 = r8712_read16(padapter, TCR); |
| i--; |
| } |
| if (i == 0) { |
| r8712_write16(padapter, 0x10250348, 0xc000); |
| r8712_write16(padapter, 0x10250348, 0xc001); |
| r8712_write16(padapter, 0x10250348, 0x2000); |
| r8712_write16(padapter, 0x10250348, 0x2001); |
| r8712_write16(padapter, 0x10250348, 0x2002); |
| r8712_write16(padapter, 0x10250348, 0x2003); |
| goto exit_fail; |
| } |
| /* 5.Download DMEM code size and Load EMEM Code Section */ |
| memset(ptx_desc, 0, TXDESC_SIZE); |
| ptx_desc->txdw0 |= cpu_to_le32(fwhdr.fw_priv_sz&0x0000ffff); |
| ptx_desc->txdw0 |= cpu_to_le32(BIT(28)); |
| memcpy(ppayload, &fwhdr.fwpriv, fwhdr.fw_priv_sz); |
| r8712_write_mem(padapter, RTL8712_DMA_VOQ, |
| fwhdr.fw_priv_sz + TXDESC_SIZE, (u8 *)ptx_desc); |
| |
| /* polling dmem code done */ |
| i = 100; |
| tmp16 = r8712_read16(padapter, TCR); |
| while (((tmp16 & _DMEM_CODE_DONE) == 0) && (i > 0)) { |
| msleep(20); |
| tmp16 = r8712_read16(padapter, TCR); |
| i--; |
| } |
| if (i == 0) |
| goto exit_fail; |
| |
| tmp8 = r8712_read8(padapter, 0x1025000A); |
| if (tmp8 & BIT(4)) /* When boot from EEPROM, |
| & FW need more time to read EEPROM */ |
| i = 60; |
| else /* boot from EFUSE */ |
| i = 30; |
| tmp16 = r8712_read16(padapter, TCR); |
| while (((tmp16 & _FWRDY) == 0) && (i > 0)) { |
| msleep(100); |
| tmp16 = r8712_read16(padapter, TCR); |
| i--; |
| } |
| if (i == 0) |
| goto exit_fail; |
| } else |
| goto exit_fail; |
| ret = _SUCCESS; |
| |
| exit_fail: |
| kfree(ptmpchar); |
| return ret; |
| } |
| |
| uint rtl8712_hal_init(struct _adapter *padapter) |
| { |
| u32 val32; |
| int i; |
| |
| /* r8712 firmware download */ |
| if (rtl8712_dl_fw(padapter) != _SUCCESS) |
| return _FAIL; |
| |
| netdev_info(padapter->pnetdev, "1 RCR=0x%x\n", |
| r8712_read32(padapter, RCR)); |
| val32 = r8712_read32(padapter, RCR); |
| r8712_write32(padapter, RCR, (val32 | BIT(26))); /* Enable RX TCP |
| Checksum offload */ |
| netdev_info(padapter->pnetdev, "2 RCR=0x%x\n", |
| r8712_read32(padapter, RCR)); |
| val32 = r8712_read32(padapter, RCR); |
| r8712_write32(padapter, RCR, (val32|BIT(25))); /* Append PHY status */ |
| val32 = 0; |
| val32 = r8712_read32(padapter, 0x10250040); |
| r8712_write32(padapter, 0x10250040, (val32&0x00FFFFFF)); |
| /* for usb rx aggregation */ |
| r8712_write8(padapter, 0x102500B5, r8712_read8(padapter, 0x102500B5) | |
| BIT(0)); /* page = 128bytes */ |
| r8712_write8(padapter, 0x102500BD, r8712_read8(padapter, 0x102500BD) | |
| BIT(7)); /* enable usb rx aggregation */ |
| r8712_write8(padapter, 0x102500D9, 1); /* TH=1 => means that invalidate |
| * usb rx aggregation */ |
| r8712_write8(padapter, 0x1025FE5B, 0x04); /* 1.7ms/4 */ |
| /* Fix the RX FIFO issue(USB error) */ |
| r8712_write8(padapter, 0x1025fe5C, r8712_read8(padapter, 0x1025fe5C) |
| | BIT(7)); |
| for (i = 0; i < 6; i++) |
| padapter->eeprompriv.mac_addr[i] = r8712_read8(padapter, |
| MACID + i); |
| return _SUCCESS; |
| } |
| |
| uint rtl8712_hal_deinit(struct _adapter *padapter) |
| { |
| r8712_write8(padapter, RF_CTRL, 0x00); |
| /* Turn off BB */ |
| msleep(20); |
| /* Turn off MAC */ |
| r8712_write8(padapter, SYS_CLKR+1, 0x38); /* Switch Control Path */ |
| r8712_write8(padapter, SYS_FUNC_EN+1, 0x70); |
| r8712_write8(padapter, PMC_FSM, 0x06); /* Enable Loader Data Keep */ |
| r8712_write8(padapter, SYS_ISO_CTRL, 0xF9); /* Isolation signals from |
| * CORE, PLL */ |
| r8712_write8(padapter, SYS_ISO_CTRL+1, 0xe8); /* Enable EFUSE 1.2V */ |
| r8712_write8(padapter, AFE_PLL_CTRL, 0x00); /* Disable AFE PLL. */ |
| r8712_write8(padapter, LDOA15_CTRL, 0x54); /* Disable A15V */ |
| r8712_write8(padapter, SYS_FUNC_EN+1, 0x50); /* Disable E-Fuse 1.2V */ |
| r8712_write8(padapter, LDOV12D_CTRL, 0x24); /* Disable LDO12(for CE) */ |
| r8712_write8(padapter, AFE_MISC, 0x30); /* Disable AFE BG&MB */ |
| /* Option for Disable 1.6V LDO. */ |
| r8712_write8(padapter, SPS0_CTRL, 0x56); /* Disable 1.6V LDO */ |
| r8712_write8(padapter, SPS0_CTRL+1, 0x43); /* Set SW PFM */ |
| return _SUCCESS; |
| } |
| |
| uint rtl871x_hal_init(struct _adapter *padapter) |
| { |
| padapter->hw_init_completed = false; |
| if (padapter->halpriv.hal_bus_init == NULL) |
| return _FAIL; |
| if (padapter->halpriv.hal_bus_init(padapter) != _SUCCESS) |
| return _FAIL; |
| if (rtl8712_hal_init(padapter) == _SUCCESS) |
| padapter->hw_init_completed = true; |
| else { |
| padapter->hw_init_completed = false; |
| return _FAIL; |
| } |
| return _SUCCESS; |
| } |
