blob: 8a2e4caa532d33629ce9516eb8dd7257c1998c75 [file] [log] [blame]
/*
* Common structures and definitions for FT1000 Flarion Flash OFDM PCMCIA and
* USB devices.
*
* Originally copyright (c) 2002 Flarion Technologies
*
*/
#define DSPVERSZ 4
#define HWSERNUMSZ 16
#define SKUSZ 20
#define EUISZ 8
#define MODESZ 2
#define CALVERSZ 2
#define CALDATESZ 6
#define ELECTRABUZZ_ID 0 /* ASIC ID for Electrabuzz */
#define MAGNEMITE_ID 0x1a01 /* ASIC ID for Magnemite */
/* MEMORY MAP common to both ELECTRABUZZ and MAGNEMITE */
#define FT1000_REG_DPRAM_ADDR 0x000E /* DPADR - Dual Port Ram Indirect
* Address Register
*/
#define FT1000_REG_SUP_CTRL 0x0020 /* HCTR - Host Control Register */
#define FT1000_REG_SUP_STAT 0x0022 /* HSTAT - Host Status Register */
#define FT1000_REG_RESET 0x0024 /* HCTR - Host Control Register */
#define FT1000_REG_SUP_ISR 0x0026 /* HISR - Host Interrupt Status
* Register
*/
#define FT1000_REG_SUP_IMASK 0x0028 /* HIMASK - Host Interrupt Mask */
#define FT1000_REG_DOORBELL 0x002a /* DBELL - Door Bell Register */
#define FT1000_REG_ASIC_ID 0x002e /* ASICID - ASIC Identification
* Number
*/
/* MEMORY MAP FOR ELECTRABUZZ ASIC */
#define FT1000_REG_UFIFO_STAT 0x0000 /* UFSR - Uplink FIFO status register */
#define FT1000_REG_UFIFO_BEG 0x0002 /* UFBR - Uplink FIFO beginning
* register
*/
#define FT1000_REG_UFIFO_MID 0x0004 /* UFMR - Uplink FIFO middle register */
#define FT1000_REG_UFIFO_END 0x0006 /* UFER - Uplink FIFO end register */
#define FT1000_REG_DFIFO_STAT 0x0008 /* DFSR - Downlink FIFO status
* register
*/
#define FT1000_REG_DFIFO 0x000A /* DFR - Downlink FIFO Register */
#define FT1000_REG_DPRAM_DATA 0x000C /* DPRAM - Dual Port Indirect
* Data Register
*/
#define FT1000_REG_WATERMARK 0x0010 /* WMARK - Watermark Register */
/* MEMORY MAP FOR MAGNEMITE */
#define FT1000_REG_MAG_UFDR 0x0000 /* UFDR - Uplink FIFO Data
* Register (32-bits)
*/
#define FT1000_REG_MAG_UFDRL 0x0000 /* UFDRL - Uplink FIFO Data
* Register low-word (16-bits)
*/
#define FT1000_REG_MAG_UFDRH 0x0002 /* UFDRH - Uplink FIFO Data Register
* high-word (16-bits)
*/
#define FT1000_REG_MAG_UFER 0x0004 /* UFER - Uplink FIFO End Register */
#define FT1000_REG_MAG_UFSR 0x0006 /* UFSR - Uplink FIFO Status Register */
#define FT1000_REG_MAG_DFR 0x0008 /* DFR - Downlink FIFO Register
* (32-bits)
*/
#define FT1000_REG_MAG_DFRL 0x0008 /* DFRL - Downlink FIFO Register
* low-word (16-bits)
*/
#define FT1000_REG_MAG_DFRH 0x000a /* DFRH - Downlink FIFO Register
* high-word (16-bits)
*/
#define FT1000_REG_MAG_DFSR 0x000c /* DFSR - Downlink FIFO Status
* Register
*/
#define FT1000_REG_MAG_DPDATA 0x0010 /* DPDATA - Dual Port RAM Indirect
* Data Register (32-bits)
*/
#define FT1000_REG_MAG_DPDATAL 0x0010 /* DPDATAL - Dual Port RAM Indirect
* Data Register low-word (16-bits)
*/
#define FT1000_REG_MAG_DPDATAH 0x0012 /* DPDATAH - Dual Port RAM Indirect Data
* Register high-word (16-bits)
*/
#define FT1000_REG_MAG_WATERMARK 0x002c /* WMARK - Watermark Register */
#define FT1000_REG_MAG_VERSION 0x0030 /* LLC Version */
/* Reserved Dual Port RAM offsets for Electrabuzz */
#define FT1000_DPRAM_TX_BASE 0x0002 /* Host to PC Card Messaging Area */
#define FT1000_DPRAM_RX_BASE 0x0800 /* PC Card to Host Messaging Area */
#define FT1000_FIFO_LEN 0x07FC /* total length for DSP FIFO tracking */
#define FT1000_HI_HO 0x07FE /* heartbeat with HI/HO */
#define FT1000_DSP_STATUS 0x0FFE /* dsp status - non-zero is a request
* to reset dsp
*/
#define FT1000_DSP_LED 0x0FFA /* dsp led status for PAD device */
#define FT1000_DSP_CON_STATE 0x0FF8 /* DSP Connection Status Info */
#define FT1000_DPRAM_FEFE 0x0002 /* location for dsp ready indicator */
#define FT1000_DSP_TIMER0 0x1FF0 /* Timer Field from Basestation */
#define FT1000_DSP_TIMER1 0x1FF2 /* Timer Field from Basestation */
#define FT1000_DSP_TIMER2 0x1FF4 /* Timer Field from Basestation */
#define FT1000_DSP_TIMER3 0x1FF6 /* Timer Field from Basestation */
/* Reserved Dual Port RAM offsets for Magnemite */
#define FT1000_DPRAM_MAG_TX_BASE 0x0000 /* Host to PC Card
* Messaging Area
*/
#define FT1000_DPRAM_MAG_RX_BASE 0x0200 /* PC Card to Host
* Messaging Area
*/
#define FT1000_MAG_FIFO_LEN 0x1FF /* total length for DSP
* FIFO tracking
*/
#define FT1000_MAG_FIFO_LEN_INDX 0x1 /* low-word index */
#define FT1000_MAG_HI_HO 0x1FF /* heartbeat with HI/HO */
#define FT1000_MAG_HI_HO_INDX 0x0 /* high-word index */
#define FT1000_MAG_DSP_LED 0x3FE /* dsp led status for
* PAD device
*/
#define FT1000_MAG_DSP_LED_INDX 0x0 /* dsp led status for
* PAD device
*/
#define FT1000_MAG_DSP_CON_STATE 0x3FE /* DSP Connection Status Info */
#define FT1000_MAG_DSP_CON_STATE_INDX 0x1 /* DSP Connection Status Info */
#define FT1000_MAG_DPRAM_FEFE 0x000 /* location for dsp ready
* indicator
*/
#define FT1000_MAG_DPRAM_FEFE_INDX 0x0 /* location for dsp ready
* indicator
*/
#define FT1000_MAG_DSP_TIMER0 0x3FC /* Timer Field from
* Basestation
*/
#define FT1000_MAG_DSP_TIMER0_INDX 0x1
#define FT1000_MAG_DSP_TIMER1 0x3FC /* Timer Field from
* Basestation
*/
#define FT1000_MAG_DSP_TIMER1_INDX 0x0
#define FT1000_MAG_DSP_TIMER2 0x3FD /* Timer Field from
* Basestation
*/
#define FT1000_MAG_DSP_TIMER2_INDX 0x1
#define FT1000_MAG_DSP_TIMER3 0x3FD /* Timer Field from
* Basestation
*/
#define FT1000_MAG_DSP_TIMER3_INDX 0x0
#define FT1000_MAG_TOTAL_LEN 0x200
#define FT1000_MAG_TOTAL_LEN_INDX 0x1
#define FT1000_MAG_PH_LEN 0x200
#define FT1000_MAG_PH_LEN_INDX 0x0
#define FT1000_MAG_PORT_ID 0x201
#define FT1000_MAG_PORT_ID_INDX 0x0
#define HOST_INTF_LE 0x0 /* Host interface little endian mode */
#define HOST_INTF_BE 0x1 /* Host interface big endian mode */
/* FT1000 to Host Doorbell assignments */
#define FT1000_DB_DPRAM_RX 0x0001 /* this value indicates that DSP
* has data for host in DPRAM
*/
#define FT1000_DB_DNLD_RX 0x0002 /* Downloader handshake doorbell */
#define FT1000_ASIC_RESET_REQ 0x0004 /* DSP requesting host to
* reset the ASIC
*/
#define FT1000_DSP_ASIC_RESET 0x0008 /* DSP indicating host that
* it will reset the ASIC
*/
#define FT1000_DB_COND_RESET 0x0010 /* DSP request for a card reset. */
/* Host to FT1000 Doorbell assignments */
#define FT1000_DB_DPRAM_TX 0x0100 /* this value indicates that host
* has data for DSP in DPRAM.
*/
#define FT1000_DB_DNLD_TX 0x0200 /* Downloader handshake doorbell */
#define FT1000_ASIC_RESET_DSP 0x0400 /* Responds to FT1000_ASIC_RESET_REQ */
#define FT1000_DB_HB 0x1000 /* Indicates that supervisor has a
* heartbeat message for DSP.
*/
#define hi 0x6869 /* PC Card heartbeat values */
#define ho 0x686f /* PC Card heartbeat values */
/* Magnemite specific defines */
#define hi_mag 0x6968 /* Byte swap hi to avoid
* additional system call
*/
#define ho_mag 0x6f68 /* Byte swap ho to avoid
* additional system call
*/
/* Bit field definitions for Host Interrupt Status Register */
/* Indicate the cause of an interrupt. */
#define ISR_EMPTY 0x00 /* no bits set */
#define ISR_DOORBELL_ACK 0x01 /* Doorbell acknowledge from DSP */
#define ISR_DOORBELL_PEND 0x02 /* Doorbell pending from DSP */
#define ISR_RCV 0x04 /* Packet available in Downlink FIFO */
#define ISR_WATERMARK 0x08 /* Watermark requirements satisfied */
/* Bit field definition for Host Interrupt Mask */
#define ISR_MASK_NONE 0x0000 /* no bits set */
#define ISR_MASK_DOORBELL_ACK 0x0001 /* Doorbell acknowledge mask */
#define ISR_MASK_DOORBELL_PEND 0x0002 /* Doorbell pending mask */
#define ISR_MASK_RCV 0x0004 /* Downlink Packet available mask */
#define ISR_MASK_WATERMARK 0x0008 /* Watermark interrupt mask */
#define ISR_MASK_ALL 0xffff /* Mask all interrupts */
/* Default interrupt mask
* (Enable Doorbell pending and Packet available interrupts)
*/
#define ISR_DEFAULT_MASK 0x7ff9
/* Bit field definition for Host Control Register */
#define DSP_RESET_BIT 0x0001 /* Bit field to control
* dsp reset state
*/
/* (0 = out of reset 1 = reset) */
#define ASIC_RESET_BIT 0x0002 /* Bit field to control
* ASIC reset state
*/
/* (0 = out of reset 1 = reset) */
#define DSP_UNENCRYPTED 0x0004
#define DSP_ENCRYPTED 0x0008
#define EFUSE_MEM_DISABLE 0x0040
/* Application specific IDs */
#define DSPID 0x20
#define HOSTID 0x10
#define DSPAIRID 0x90
#define DRIVERID 0x00
#define NETWORKID 0x20
/* Size of DPRAM Message */
#define MAX_CMD_SQSIZE 1780
#define ENET_MAX_SIZE 1514
#define ENET_HEADER_SIZE 14
#define SLOWQ_TYPE 0
#define FASTQ_TYPE 1
#define MAX_DSP_SESS_REC 1024
#define DSP_QID_OFFSET 4
/* Driver message types */
#define MEDIA_STATE 0x0010
#define TIME_UPDATE 0x0020
#define DSP_PROVISION 0x0030
#define DSP_INIT_MSG 0x0050
#define DSP_HIBERNATE 0x0060
#define DSP_STORE_INFO 0x0070
#define DSP_GET_INFO 0x0071
#define GET_DRV_ERR_RPT_MSG 0x0073
#define RSP_DRV_ERR_RPT_MSG 0x0074
/* Driver Error Messages for DSP */
#define DSP_HB_INFO 0x7ef0
#define DSP_FIFO_INFO 0x7ef1
#define DSP_CONDRESET_INFO 0x7ef2
#define DSP_CMDLEN_INFO 0x7ef3
#define DSP_CMDPHCKSUM_INFO 0x7ef4
#define DSP_PKTPHCKSUM_INFO 0x7ef5
#define DSP_PKTLEN_INFO 0x7ef6
#define DSP_USER_RESET 0x7ef7
#define FIFO_FLUSH_MAXLIMIT 0x7ef8
#define FIFO_FLUSH_BADCNT 0x7ef9
#define FIFO_ZERO_LEN 0x7efa
/* Pseudo Header structure */
struct pseudo_hdr {
unsigned short length; /* length of msg body */
unsigned char source; /* hardware source id */
/* Host = 0x10 */
/* Dsp = 0x20 */
unsigned char destination; /* hardware destination id
* (refer to source)
*/
unsigned char portdest; /* software destination port id */
/* Host = 0x00 */
/* Applicaton Broadcast = 0x10 */
/* Network Stack = 0x20 */
/* Dsp OAM = 0x80 */
/* Dsp Airlink = 0x90 */
/* Dsp Loader = 0xa0 */
/* Dsp MIP = 0xb0 */
unsigned char portsrc; /* software source port id
* (refer to portdest)
*/
unsigned short sh_str_id; /* not used */
unsigned char control; /* not used */
unsigned char rsvd1;
unsigned char seq_num; /* message sequence number */
unsigned char rsvd2;
unsigned short qos_class; /* not used */
unsigned short checksum; /* pseudo header checksum */
} __packed;
struct drv_msg {
struct pseudo_hdr pseudo;
u16 type;
u16 length;
u8 data[0];
} __packed;
struct media_msg {
struct pseudo_hdr pseudo;
u16 type;
u16 length;
u16 state;
u32 ip_addr;
u32 net_mask;
u32 gateway;
u32 dns_1;
u32 dns_2;
} __packed;
struct dsp_init_msg {
struct pseudo_hdr pseudo;
u16 type;
u16 length;
u8 DspVer[DSPVERSZ]; /* DSP version number */
u8 HwSerNum[HWSERNUMSZ]; /* Hardware Serial Number */
u8 Sku[SKUSZ]; /* SKU */
u8 eui64[EUISZ]; /* EUI64 */
u8 ProductMode[MODESZ]; /* Product Mode (Market/Production) */
u8 RfCalVer[CALVERSZ]; /* Rf Calibration version */
u8 RfCalDate[CALDATESZ]; /* Rf Calibration date */
} __packed;
struct prov_record {
struct list_head list;
u8 *pprov_data;
};
struct ft1000_info {
void *priv;
struct net_device_stats stats;
u16 DrvErrNum;
u16 AsicID;
int CardReady;
int registered;
int mediastate;
u8 squeseqnum; /* sequence number on slow queue */
spinlock_t dpram_lock;
u16 fifo_cnt;
u8 DspVer[DSPVERSZ]; /* DSP version number */
u8 HwSerNum[HWSERNUMSZ]; /* Hardware Serial Number */
u8 Sku[SKUSZ]; /* SKU */
u8 eui64[EUISZ]; /* EUI64 */
time_t ConTm; /* Connection Time */
u8 ProductMode[MODESZ];
u8 RfCalVer[CALVERSZ];
u8 RfCalDate[CALDATESZ];
u16 DSP_TIME[4];
u16 LedStat;
u16 ConStat;
u16 ProgConStat;
struct list_head prov_list;
u16 DSPInfoBlklen;
int (*ft1000_reset)(void *);
u16 DSPInfoBlk[MAX_DSP_SESS_REC];
union {
u16 Rec[MAX_DSP_SESS_REC];
u32 MagRec[MAX_DSP_SESS_REC/2];
} DSPSess;
};