Google Git
Sign in
gfiber / kernel / bruno / refs/heads/pending / . / drivers / net / titan_ge.c
blob: dc137bf8d19c729f2935b1c7b596ea75188a851d [file] [log] [blame]
/*
* drivers/net/titan_ge.c - Driver for Titan ethernet ports
*
* Copyright (C) 2003 PMC-Sierra Inc.
* Author : Manish Lachwani (lachwani@pmc-sierra.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
* The MAC unit of the Titan consists of the following:
*
* -> XDMA Engine to move data to from the memory to the MAC packet FIFO
* -> FIFO is where the incoming and outgoing data is placed
* -> TRTG is the unit that pulls the data from the FIFO for Tx and pushes
* the data into the FIFO for Rx
* -> TMAC is the outgoing MAC interface and RMAC is the incoming.
* -> AFX is the address filtering block
* -> GMII block to communicate with the PHY
*
* Rx will look like the following:
* GMII --> RMAC --> AFX --> TRTG --> Rx FIFO --> XDMA --> CPU memory
*
* Tx will look like the following:
* CPU memory --> XDMA --> Tx FIFO --> TRTG --> TMAC --> GMII
*
* The Titan driver has support for the following performance features:
* -> Rx side checksumming
* -> Jumbo Frames
* -> Interrupt Coalscing
* -> Rx NAPI
* -> SKB Recycling
* -> Transmit/Receive descriptors in SRAM
* -> Fast routing for IP forwarding
*/
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ip.h>
#include <linux/init.h>
#include <linux/in.h>
#include <linux/platform_device.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/mii.h>
#include <linux/delay.h>
#include <linux/skbuff.h>
#include <linux/prefetch.h>
/* For MII specifc registers, titan_mdio.h should be included */
#include <net/ip.h>
#include <asm/bitops.h>
#include <asm/io.h>
#include <asm/types.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/titan_dep.h>
#include "titan_ge.h"
#include "titan_mdio.h"
/* Static Function Declarations */
static int titan_ge_eth_open(struct net_device *);
static void titan_ge_eth_stop(struct net_device *);
static struct net_device_stats *titan_ge_get_stats(struct net_device *);
static int titan_ge_init_rx_desc_ring(titan_ge_port_info *, int, int,
unsigned long, unsigned long,
unsigned long);
static int titan_ge_init_tx_desc_ring(titan_ge_port_info *, int,
unsigned long, unsigned long);
static int titan_ge_open(struct net_device *);
static int titan_ge_start_xmit(struct sk_buff *, struct net_device *);
static int titan_ge_stop(struct net_device *);
static unsigned long titan_ge_tx_coal(unsigned long, int);
static void titan_ge_port_reset(unsigned int);
static int titan_ge_free_tx_queue(titan_ge_port_info *);
static int titan_ge_rx_task(struct net_device *, titan_ge_port_info *);
static int titan_ge_port_start(struct net_device *, titan_ge_port_info *);
static int titan_ge_return_tx_desc(titan_ge_port_info *, int);
/*
* Some configuration for the FIFO and the XDMA channel needs
* to be done only once for all the ports. This flag controls
* that
*/
static unsigned long config_done;
/*
* One time out of memory flag
*/
static unsigned int oom_flag;
static int titan_ge_poll(struct net_device *netdev, int *budget);
static int titan_ge_receive_queue(struct net_device *, unsigned int);
static struct platform_device *titan_ge_device[3];
/* MAC Address */
extern unsigned char titan_ge_mac_addr_base[6];
unsigned long titan_ge_base;
static unsigned long titan_ge_sram;
static char titan_string[] = "titan";
/*
* The Titan GE has two alignment requirements:
* -> skb->data to be cacheline aligned (32 byte)
* -> IP header alignment to 16 bytes
*
* The latter is not implemented. So, that results in an extra copy on
* the Rx. This is a big performance hog. For the former case, the
* dev_alloc_skb() has been replaced with titan_ge_alloc_skb(). The size
* requested is calculated:
*
* Ethernet Frame Size : 1518
* Ethernet Header : 14
* Future Titan change for IP header alignment : 2
*
* Hence, we allocate (1518 + 14 + 2+ 64) = 1580 bytes. For IP header
* alignment, we use skb_reserve().
*/
#define ALIGNED_RX_SKB_ADDR(addr) \
((((unsigned long)(addr) + (64UL - 1UL)) \
& ~(64UL - 1UL)) - (unsigned long)(addr))
#define titan_ge_alloc_skb(__length, __gfp_flags) \
({ struct sk_buff *__skb; \
__skb = alloc_skb((__length) + 64, (__gfp_flags)); \
if(__skb) { \
int __offset = (int) ALIGNED_RX_SKB_ADDR(__skb->data); \
if(__offset) \
skb_reserve(__skb, __offset); \
} \
__skb; \
})
/*
* Configure the GMII block of the Titan based on what the PHY tells us
*/
static void titan_ge_gmii_config(int port_num)
{
unsigned int reg_data = 0, phy_reg;
int err;
err = titan_ge_mdio_read(port_num, TITAN_GE_MDIO_PHY_STATUS, &phy_reg);
if (err == TITAN_GE_MDIO_ERROR) {
printk(KERN_ERR
"Could not read PHY control register 0x11 \n");
printk(KERN_ERR
"Setting speed to 1000 Mbps and Duplex to Full \n");
return;
}
err = titan_ge_mdio_write(port_num, TITAN_GE_MDIO_PHY_IE, 0);
if (phy_reg & 0x8000) {
if (phy_reg & 0x2000) {
/* Full Duplex and 1000 Mbps */
TITAN_GE_WRITE((TITAN_GE_GMII_CONFIG_MODE +
(port_num << 12)), 0x201);
} else {
/* Half Duplex and 1000 Mbps */
TITAN_GE_WRITE((TITAN_GE_GMII_CONFIG_MODE +
(port_num << 12)), 0x2201);
}
}
if (phy_reg & 0x4000) {
if (phy_reg & 0x2000) {
/* Full Duplex and 100 Mbps */
TITAN_GE_WRITE((TITAN_GE_GMII_CONFIG_MODE +
(port_num << 12)), 0x100);
} else {
/* Half Duplex and 100 Mbps */
TITAN_GE_WRITE((TITAN_GE_GMII_CONFIG_MODE +
(port_num << 12)), 0x2100);
}
}
reg_data = TITAN_GE_READ(TITAN_GE_GMII_CONFIG_GENERAL +
(port_num << 12));
reg_data |= 0x3;
TITAN_GE_WRITE((TITAN_GE_GMII_CONFIG_GENERAL +
(port_num << 12)), reg_data);
}
/*
* Enable the TMAC if it is not
*/
static void titan_ge_enable_tx(unsigned int port_num)
{
unsigned long reg_data;
reg_data = TITAN_GE_READ(TITAN_GE_TMAC_CONFIG_1 + (port_num << 12));
if (!(reg_data & 0x8000)) {
printk("TMAC disabled for port %d!! \n", port_num);
reg_data |= 0x0001; /* Enable TMAC */
reg_data |= 0x4000; /* CRC Check Enable */
reg_data |= 0x2000; /* Padding enable */
reg_data |= 0x0800; /* CRC Add enable */
reg_data |= 0x0080; /* PAUSE frame */
TITAN_GE_WRITE((TITAN_GE_TMAC_CONFIG_1 +
(port_num << 12)), reg_data);
}
}
/*
* Tx Timeout function
*/
static void titan_ge_tx_timeout(struct net_device *netdev)
{
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
printk(KERN_INFO "%s: TX timeout ", netdev->name);
printk(KERN_INFO "Resetting card \n");
/* Do the reset outside of interrupt context */
schedule_work(&titan_ge_eth->tx_timeout_task);
}
/*
* Update the AFX tables for UC and MC for slice 0 only
*/
static void titan_ge_update_afx(titan_ge_port_info * titan_ge_eth)
{
int port = titan_ge_eth->port_num;
unsigned int i;
volatile unsigned long reg_data = 0;
u8 p_addr[6];
memcpy(p_addr, titan_ge_eth->port_mac_addr, 6);
/* Set the MAC address here for TMAC and RMAC */
TITAN_GE_WRITE((TITAN_GE_TMAC_STATION_HI + (port << 12)),
((p_addr[5] << 8) | p_addr[4]));
TITAN_GE_WRITE((TITAN_GE_TMAC_STATION_MID + (port << 12)),
((p_addr[3] << 8) | p_addr[2]));
TITAN_GE_WRITE((TITAN_GE_TMAC_STATION_LOW + (port << 12)),
((p_addr[1] << 8) | p_addr[0]));
TITAN_GE_WRITE((TITAN_GE_RMAC_STATION_HI + (port << 12)),
((p_addr[5] << 8) | p_addr[4]));
TITAN_GE_WRITE((TITAN_GE_RMAC_STATION_MID + (port << 12)),
((p_addr[3] << 8) | p_addr[2]));
TITAN_GE_WRITE((TITAN_GE_RMAC_STATION_LOW + (port << 12)),
((p_addr[1] << 8) | p_addr[0]));
TITAN_GE_WRITE((0x112c | (port << 12)), 0x1);
/* Configure the eight address filters */
for (i = 0; i < 8; i++) {
/* Select each of the eight filters */
TITAN_GE_WRITE((TITAN_GE_AFX_ADDRS_FILTER_CTRL_2 +
(port << 12)), i);
/* Configure the match */
reg_data = 0x9; /* Forward Enable Bit */
TITAN_GE_WRITE((TITAN_GE_AFX_ADDRS_FILTER_CTRL_0 +
(port << 12)), reg_data);
/* Finally, AFX Exact Match Address Registers */
TITAN_GE_WRITE((TITAN_GE_AFX_EXACT_MATCH_LOW + (port << 12)),
((p_addr[1] << 8) | p_addr[0]));
TITAN_GE_WRITE((TITAN_GE_AFX_EXACT_MATCH_MID + (port << 12)),
((p_addr[3] << 8) | p_addr[2]));
TITAN_GE_WRITE((TITAN_GE_AFX_EXACT_MATCH_HIGH + (port << 12)),
((p_addr[5] << 8) | p_addr[4]));
/* VLAN id set to 0 */
TITAN_GE_WRITE((TITAN_GE_AFX_EXACT_MATCH_VID +
(port << 12)), 0);
}
}
/*
* Actual Routine to reset the adapter when the timeout occurred
*/
static void titan_ge_tx_timeout_task(struct net_device *netdev)
{
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
int port = titan_ge_eth->port_num;
printk("Titan GE: Transmit timed out. Resetting ... \n");
/* Dump debug info */
printk(KERN_ERR "TRTG cause : %x \n",
TITAN_GE_READ(0x100c + (port << 12)));
/* Fix this for the other ports */
printk(KERN_ERR "FIFO cause : %x \n", TITAN_GE_READ(0x482c));
printk(KERN_ERR "IE cause : %x \n", TITAN_GE_READ(0x0040));
printk(KERN_ERR "XDMA GDI ERROR : %x \n",
TITAN_GE_READ(0x5008 + (port << 8)));
printk(KERN_ERR "CHANNEL ERROR: %x \n",
TITAN_GE_READ(TITAN_GE_CHANNEL0_INTERRUPT
+ (port << 8)));
netif_device_detach(netdev);
titan_ge_port_reset(titan_ge_eth->port_num);
titan_ge_port_start(netdev, titan_ge_eth);
netif_device_attach(netdev);
}
/*
* Change the MTU of the Ethernet Device
*/
static int titan_ge_change_mtu(struct net_device *netdev, int new_mtu)
{
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
unsigned long flags;
if ((new_mtu > 9500) || (new_mtu < 64))
return -EINVAL;
spin_lock_irqsave(&titan_ge_eth->lock, flags);
netdev->mtu = new_mtu;
/* Now we have to reopen the interface so that SKBs with the new
* size will be allocated */
if (netif_running(netdev)) {
titan_ge_eth_stop(netdev);
if (titan_ge_eth_open(netdev) != TITAN_OK) {
printk(KERN_ERR
"%s: Fatal error on opening device\n",
netdev->name);
spin_unlock_irqrestore(&titan_ge_eth->lock, flags);
return -1;
}
}
spin_unlock_irqrestore(&titan_ge_eth->lock, flags);
return 0;
}
/*
* Titan Gbe Interrupt Handler. All the three ports send interrupt to one line
* only. Once an interrupt is triggered, figure out the port and then check
* the channel.
*/
static irqreturn_t titan_ge_int_handler(int irq, void *dev_id)
{
struct net_device *netdev = (struct net_device *) dev_id;
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
unsigned int port_num = titan_ge_eth->port_num;
unsigned int reg_data;
unsigned int eth_int_cause_error = 0, is;
unsigned long eth_int_cause1;
int err = 0;
#ifdef CONFIG_SMP
unsigned long eth_int_cause2;
#endif
/* Ack the CPU interrupt */
switch (port_num) {
case 0:
is = OCD_READ(RM9000x2_OCD_INTP0STATUS1);
OCD_WRITE(RM9000x2_OCD_INTP0CLEAR1, is);
#ifdef CONFIG_SMP
is = OCD_READ(RM9000x2_OCD_INTP1STATUS1);
OCD_WRITE(RM9000x2_OCD_INTP1CLEAR1, is);
#endif
break;
case 1:
is = OCD_READ(RM9000x2_OCD_INTP0STATUS0);
OCD_WRITE(RM9000x2_OCD_INTP0CLEAR0, is);
#ifdef CONFIG_SMP
is = OCD_READ(RM9000x2_OCD_INTP1STATUS0);
OCD_WRITE(RM9000x2_OCD_INTP1CLEAR0, is);
#endif
break;
case 2:
is = OCD_READ(RM9000x2_OCD_INTP0STATUS4);
OCD_WRITE(RM9000x2_OCD_INTP0CLEAR4, is);
#ifdef CONFIG_SMP
is = OCD_READ(RM9000x2_OCD_INTP1STATUS4);
OCD_WRITE(RM9000x2_OCD_INTP1CLEAR4, is);
#endif
}
eth_int_cause1 = TITAN_GE_READ(TITAN_GE_INTR_XDMA_CORE_A);
#ifdef CONFIG_SMP
eth_int_cause2 = TITAN_GE_READ(TITAN_GE_INTR_XDMA_CORE_B);
#endif
/* Spurious interrupt */
#ifdef CONFIG_SMP
if ( (eth_int_cause1 == 0) && (eth_int_cause2 == 0)) {
#else
if (eth_int_cause1 == 0) {
#endif
eth_int_cause_error = TITAN_GE_READ(TITAN_GE_CHANNEL0_INTERRUPT +
(port_num << 8));
if (eth_int_cause_error == 0)
return IRQ_NONE;
}
/* Handle Tx first. No need to ack interrupts */
#ifdef CONFIG_SMP
if ( (eth_int_cause1 & 0x20202) ||
(eth_int_cause2 & 0x20202) )
#else
if (eth_int_cause1 & 0x20202)
#endif
titan_ge_free_tx_queue(titan_ge_eth);
/* Handle the Rx next */
#ifdef CONFIG_SMP
if ( (eth_int_cause1 & 0x10101) ||
(eth_int_cause2 & 0x10101)) {
#else
if (eth_int_cause1 & 0x10101) {
#endif
if (netif_rx_schedule_prep(netdev)) {
unsigned int ack;
ack = TITAN_GE_READ(TITAN_GE_INTR_XDMA_IE);
/* Disable Tx and Rx both */
if (port_num == 0)
ack &= ~(0x3);
if (port_num == 1)
ack &= ~(0x300);
if (port_num == 2)
ack &= ~(0x30000);
/* Interrupts have been disabled */
TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_IE, ack);
__netif_rx_schedule(netdev);
}
}
/* Handle error interrupts */
if (eth_int_cause_error && (eth_int_cause_error != 0x2)) {
printk(KERN_ERR
"XDMA Channel Error : %x on port %d\n",
eth_int_cause_error, port_num);
printk(KERN_ERR
"XDMA GDI Hardware error : %x on port %d\n",
TITAN_GE_READ(0x5008 + (port_num << 8)), port_num);
printk(KERN_ERR
"XDMA currently has %d Rx descriptors \n",
TITAN_GE_READ(0x5048 + (port_num << 8)));
printk(KERN_ERR
"XDMA currently has prefetcted %d Rx descriptors \n",
TITAN_GE_READ(0x505c + (port_num << 8)));
TITAN_GE_WRITE((TITAN_GE_CHANNEL0_INTERRUPT +
(port_num << 8)), eth_int_cause_error);
}
/*
* PHY interrupt to inform abt the changes. Reading the
* PHY Status register will clear the interrupt
*/
if ((!(eth_int_cause1 & 0x30303)) &&
(eth_int_cause_error == 0)) {
err =
titan_ge_mdio_read(port_num,
TITAN_GE_MDIO_PHY_IS, &reg_data);
if (reg_data & 0x0400) {
/* Link status change */
titan_ge_mdio_read(port_num,
TITAN_GE_MDIO_PHY_STATUS, &reg_data);
if (!(reg_data & 0x0400)) {
/* Link is down */
netif_carrier_off(netdev);
netif_stop_queue(netdev);
} else {
/* Link is up */
netif_carrier_on(netdev);
netif_wake_queue(netdev);
/* Enable the queue */
titan_ge_enable_tx(port_num);
}
}
}
return IRQ_HANDLED;
}
/*
* Multicast and Promiscuous mode set. The
* set_multi entry point is called whenever the
* multicast address list or the network interface
* flags are updated.
*/
static void titan_ge_set_multi(struct net_device *netdev)
{
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
unsigned int port_num = titan_ge_eth->port_num;
unsigned long reg_data;
reg_data = TITAN_GE_READ(TITAN_GE_AFX_ADDRS_FILTER_CTRL_1 +
(port_num << 12));
if (netdev->flags & IFF_PROMISC) {
reg_data |= 0x2;
}
else if (netdev->flags & IFF_ALLMULTI) {
reg_data |= 0x01;
reg_data |= 0x400; /* Use the 64-bit Multicast Hash bin */
}
else {
reg_data = 0x2;
}
TITAN_GE_WRITE((TITAN_GE_AFX_ADDRS_FILTER_CTRL_1 +
(port_num << 12)), reg_data);
if (reg_data & 0x01) {
TITAN_GE_WRITE((TITAN_GE_AFX_MULTICAST_HASH_LOW +
(port_num << 12)), 0xffff);
TITAN_GE_WRITE((TITAN_GE_AFX_MULTICAST_HASH_MIDLOW +
(port_num << 12)), 0xffff);
TITAN_GE_WRITE((TITAN_GE_AFX_MULTICAST_HASH_MIDHI +
(port_num << 12)), 0xffff);
TITAN_GE_WRITE((TITAN_GE_AFX_MULTICAST_HASH_HI +
(port_num << 12)), 0xffff);
}
}
/*
* Open the network device
*/
static int titan_ge_open(struct net_device *netdev)
{
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
unsigned int port_num = titan_ge_eth->port_num;
unsigned int irq = TITAN_ETH_PORT_IRQ - port_num;
int retval;
retval = request_irq(irq, titan_ge_int_handler,
SA_INTERRUPT | SA_SAMPLE_RANDOM , netdev->name, netdev);
if (retval != 0) {
printk(KERN_ERR "Cannot assign IRQ number to TITAN GE \n");
return -1;
}
netdev->irq = irq;
printk(KERN_INFO "Assigned IRQ %d to port %d\n", irq, port_num);
spin_lock_irq(&(titan_ge_eth->lock));
if (titan_ge_eth_open(netdev) != TITAN_OK) {
spin_unlock_irq(&(titan_ge_eth->lock));
printk("%s: Error opening interface \n", netdev->name);
free_irq(netdev->irq, netdev);
return -EBUSY;
}
spin_unlock_irq(&(titan_ge_eth->lock));
return 0;
}
/*
* Allocate the SKBs for the Rx ring. Also used
* for refilling the queue
*/
static int titan_ge_rx_task(struct net_device *netdev,
titan_ge_port_info *titan_ge_port)
{
struct device *device = &titan_ge_device[titan_ge_port->port_num]->dev;
volatile titan_ge_rx_desc *rx_desc;
struct sk_buff *skb;
int rx_used_desc;
int count = 0;
while (titan_ge_port->rx_ring_skbs < titan_ge_port->rx_ring_size) {
/* First try to get the skb from the recycler */
#ifdef TITAN_GE_JUMBO_FRAMES
skb = titan_ge_alloc_skb(TITAN_GE_JUMBO_BUFSIZE, GFP_ATOMIC);
#else
skb = titan_ge_alloc_skb(TITAN_GE_STD_BUFSIZE, GFP_ATOMIC);
#endif
if (unlikely(!skb)) {
/* OOM, set the flag */
printk("OOM \n");
oom_flag = 1;
break;
}
count++;
skb->dev = netdev;
titan_ge_port->rx_ring_skbs++;
rx_used_desc = titan_ge_port->rx_used_desc_q;
rx_desc = &(titan_ge_port->rx_desc_area[rx_used_desc]);
#ifdef TITAN_GE_JUMBO_FRAMES
rx_desc->buffer_addr = dma_map_single(device, skb->data,
TITAN_GE_JUMBO_BUFSIZE - 2, DMA_FROM_DEVICE);
#else
rx_desc->buffer_addr = dma_map_single(device, skb->data,
TITAN_GE_STD_BUFSIZE - 2, DMA_FROM_DEVICE);
#endif
titan_ge_port->rx_skb[rx_used_desc] = skb;
rx_desc->cmd_sts = TITAN_GE_RX_BUFFER_OWNED;
titan_ge_port->rx_used_desc_q =
(rx_used_desc + 1) % TITAN_GE_RX_QUEUE;
}
return count;
}
/*
* Actual init of the Tital GE port. There is one register for
* the channel configuration
*/
static void titan_port_init(struct net_device *netdev,
titan_ge_port_info * titan_ge_eth)
{
unsigned long reg_data;
titan_ge_port_reset(titan_ge_eth->port_num);
/* First reset the TMAC */
reg_data = TITAN_GE_READ(TITAN_GE_CHANNEL0_CONFIG);
reg_data |= 0x80000000;
TITAN_GE_WRITE(TITAN_GE_CHANNEL0_CONFIG, reg_data);
udelay(30);
reg_data = TITAN_GE_READ(TITAN_GE_CHANNEL0_CONFIG);
reg_data &= ~(0xc0000000);
TITAN_GE_WRITE(TITAN_GE_CHANNEL0_CONFIG, reg_data);
/* Now reset the RMAC */
reg_data = TITAN_GE_READ(TITAN_GE_CHANNEL0_CONFIG);
reg_data |= 0x00080000;
TITAN_GE_WRITE(TITAN_GE_CHANNEL0_CONFIG, reg_data);
udelay(30);
reg_data = TITAN_GE_READ(TITAN_GE_CHANNEL0_CONFIG);
reg_data &= ~(0x000c0000);
TITAN_GE_WRITE(TITAN_GE_CHANNEL0_CONFIG, reg_data);
}
/*
* Start the port. All the hardware specific configuration
* for the XDMA, Tx FIFO, Rx FIFO, TMAC, RMAC, TRTG and AFX
* go here
*/
static int titan_ge_port_start(struct net_device *netdev,
titan_ge_port_info * titan_port)
{
volatile unsigned long reg_data, reg_data1;
int port_num = titan_port->port_num;
int count = 0;
unsigned long reg_data_1;
if (config_done == 0) {
reg_data = TITAN_GE_READ(0x0004);
reg_data |= 0x100;
TITAN_GE_WRITE(0x0004, reg_data);
reg_data &= ~(0x100);
TITAN_GE_WRITE(0x0004, reg_data);
/* Turn on GMII/MII mode and turn off TBI mode */
reg_data = TITAN_GE_READ(TITAN_GE_TSB_CTRL_1);
reg_data |= 0x00000700;
reg_data &= ~(0x00800000); /* Fencing */
TITAN_GE_WRITE(0x000c, 0x00001100);
TITAN_GE_WRITE(TITAN_GE_TSB_CTRL_1, reg_data);
/* Set the CPU Resource Limit register */
TITAN_GE_WRITE(0x00f8, 0x8);
/* Be conservative when using the BIU buffers */
TITAN_GE_WRITE(0x0068, 0x4);
}
titan_port->tx_threshold = 0;
titan_port->rx_threshold = 0;
/* We need to write the descriptors for Tx and Rx */
TITAN_GE_WRITE((TITAN_GE_CHANNEL0_TX_DESC + (port_num << 8)),
(unsigned long) titan_port->tx_dma);
TITAN_GE_WRITE((TITAN_GE_CHANNEL0_RX_DESC + (port_num << 8)),
(unsigned long) titan_port->rx_dma);
if (config_done == 0) {
/* Step 1: XDMA config */
reg_data = TITAN_GE_READ(TITAN_GE_XDMA_CONFIG);
reg_data &= ~(0x80000000); /* clear reset */
reg_data |= 0x1 << 29; /* sparse tx descriptor spacing */
reg_data |= 0x1 << 28; /* sparse rx descriptor spacing */
reg_data |= (0x1 << 23) | (0x1 << 24); /* Descriptor Coherency */
reg_data |= (0x1 << 21) | (0x1 << 22); /* Data Coherency */
TITAN_GE_WRITE(TITAN_GE_XDMA_CONFIG, reg_data);
}
/* IR register for the XDMA */
reg_data = TITAN_GE_READ(TITAN_GE_GDI_INTERRUPT_ENABLE + (port_num << 8));
reg_data |= 0x80068000; /* No Rx_OOD */
TITAN_GE_WRITE((TITAN_GE_GDI_INTERRUPT_ENABLE + (port_num << 8)), reg_data);
/* Start the Tx and Rx XDMA controller */
reg_data = TITAN_GE_READ(TITAN_GE_CHANNEL0_CONFIG + (port_num << 8));
reg_data &= 0x4fffffff; /* Clear tx reset */
reg_data &= 0xfff4ffff; /* Clear rx reset */
#ifdef TITAN_GE_JUMBO_FRAMES
reg_data |= 0xa0 | 0x30030000;
#else
reg_data |= 0x40 | 0x20030000;
#endif
#ifndef CONFIG_SMP
reg_data &= ~(0x10);
reg_data |= 0x0f; /* All of the packet */
#endif
TITAN_GE_WRITE((TITAN_GE_CHANNEL0_CONFIG + (port_num << 8)), reg_data);
/* Rx desc count */
count = titan_ge_rx_task(netdev, titan_port);
TITAN_GE_WRITE((0x5048 + (port_num << 8)), count);
count = TITAN_GE_READ(0x5048 + (port_num << 8));
udelay(30);
/*
* Step 2: Configure the SDQPF, i.e. FIFO
*/
if (config_done == 0) {
reg_data = TITAN_GE_READ(TITAN_GE_SDQPF_RXFIFO_CTL);
reg_data = 0x1;
TITAN_GE_WRITE(TITAN_GE_SDQPF_RXFIFO_CTL, reg_data);
reg_data &= ~(0x1);
TITAN_GE_WRITE(TITAN_GE_SDQPF_RXFIFO_CTL, reg_data);
reg_data = TITAN_GE_READ(TITAN_GE_SDQPF_RXFIFO_CTL);
TITAN_GE_WRITE(TITAN_GE_SDQPF_RXFIFO_CTL, reg_data);
reg_data = TITAN_GE_READ(TITAN_GE_SDQPF_TXFIFO_CTL);
reg_data = 0x1;
TITAN_GE_WRITE(TITAN_GE_SDQPF_TXFIFO_CTL, reg_data);
reg_data &= ~(0x1);
TITAN_GE_WRITE(TITAN_GE_SDQPF_TXFIFO_CTL, reg_data);
reg_data = TITAN_GE_READ(TITAN_GE_SDQPF_TXFIFO_CTL);
TITAN_GE_WRITE(TITAN_GE_SDQPF_TXFIFO_CTL, reg_data);
}
/*
* Enable RX FIFO 0, 4 and 8
*/
if (port_num == 0) {
reg_data = TITAN_GE_READ(TITAN_GE_SDQPF_RXFIFO_0);
reg_data |= 0x100000;
reg_data |= (0xff << 10);
TITAN_GE_WRITE(TITAN_GE_SDQPF_RXFIFO_0, reg_data);
/*
* BAV2,BAV and DAV settings for the Rx FIFO
*/
reg_data1 = TITAN_GE_READ(0x4844);
reg_data1 |= ( (0x10 << 20) | (0x10 << 10) | 0x1);
TITAN_GE_WRITE(0x4844, reg_data1);
reg_data &= ~(0x00100000);
reg_data |= 0x200000;
TITAN_GE_WRITE(TITAN_GE_SDQPF_RXFIFO_0, reg_data);
reg_data = TITAN_GE_READ(TITAN_GE_SDQPF_TXFIFO_0);
reg_data |= 0x100000;
TITAN_GE_WRITE(TITAN_GE_SDQPF_TXFIFO_0, reg_data);
reg_data |= (0xff << 10);
TITAN_GE_WRITE(TITAN_GE_SDQPF_TXFIFO_0, reg_data);
/*
* BAV2, BAV and DAV settings for the Tx FIFO
*/
reg_data1 = TITAN_GE_READ(0x4944);
reg_data1 = ( (0x1 << 20) | (0x1 << 10) | 0x10);
TITAN_GE_WRITE(0x4944, reg_data1);
reg_data &= ~(0x00100000);
reg_data |= 0x200000;
TITAN_GE_WRITE(TITAN_GE_SDQPF_TXFIFO_0, reg_data);
}
if (port_num == 1) {
reg_data = TITAN_GE_READ(0x4870);
reg_data |= 0x100000;
reg_data |= (0xff << 10) | (0xff + 1);
TITAN_GE_WRITE(0x4870, reg_data);
/*
* BAV2,BAV and DAV settings for the Rx FIFO
*/
reg_data1 = TITAN_GE_READ(0x4874);
reg_data1 |= ( (0x10 << 20) | (0x10 << 10) | 0x1);
TITAN_GE_WRITE(0x4874, reg_data1);
reg_data &= ~(0x00100000);
reg_data |= 0x200000;
TITAN_GE_WRITE(0x4870, reg_data);
reg_data = TITAN_GE_READ(0x494c);
reg_data |= 0x100000;
TITAN_GE_WRITE(0x494c, reg_data);
reg_data |= (0xff << 10) | (0xff + 1);
TITAN_GE_WRITE(0x494c, reg_data);
/*
* BAV2, BAV and DAV settings for the Tx FIFO
*/
reg_data1 = TITAN_GE_READ(0x4950);
reg_data1 = ( (0x1 << 20) | (0x1 << 10) | 0x10);
TITAN_GE_WRITE(0x4950, reg_data1);
reg_data &= ~(0x00100000);
reg_data |= 0x200000;
TITAN_GE_WRITE(0x494c, reg_data);
}
/*
* Titan 1.2 revision does support port #2
*/
if (port_num == 2) {
/*
* Put the descriptors in the SRAM
*/
reg_data = TITAN_GE_READ(0x48a0);
reg_data |= 0x100000;
reg_data |= (0xff << 10) | (2*(0xff + 1));
TITAN_GE_WRITE(0x48a0, reg_data);
/*
* BAV2,BAV and DAV settings for the Rx FIFO
*/
reg_data1 = TITAN_GE_READ(0x48a4);
reg_data1 |= ( (0x10 << 20) | (0x10 << 10) | 0x1);
TITAN_GE_WRITE(0x48a4, reg_data1);
reg_data &= ~(0x00100000);
reg_data |= 0x200000;
TITAN_GE_WRITE(0x48a0, reg_data);
reg_data = TITAN_GE_READ(0x4958);
reg_data |= 0x100000;
TITAN_GE_WRITE(0x4958, reg_data);
reg_data |= (0xff << 10) | (2*(0xff + 1));
TITAN_GE_WRITE(0x4958, reg_data);
/*
* BAV2, BAV and DAV settings for the Tx FIFO
*/
reg_data1 = TITAN_GE_READ(0x495c);
reg_data1 = ( (0x1 << 20) | (0x1 << 10) | 0x10);
TITAN_GE_WRITE(0x495c, reg_data1);
reg_data &= ~(0x00100000);
reg_data |= 0x200000;
TITAN_GE_WRITE(0x4958, reg_data);
}
if (port_num == 2) {
reg_data = TITAN_GE_READ(0x48a0);
reg_data |= 0x100000;
reg_data |= (0xff << 10) | (2*(0xff + 1));
TITAN_GE_WRITE(0x48a0, reg_data);
/*
* BAV2,BAV and DAV settings for the Rx FIFO
*/
reg_data1 = TITAN_GE_READ(0x48a4);
reg_data1 |= ( (0x10 << 20) | (0x10 << 10) | 0x1);
TITAN_GE_WRITE(0x48a4, reg_data1);
reg_data &= ~(0x00100000);
reg_data |= 0x200000;
TITAN_GE_WRITE(0x48a0, reg_data);
reg_data = TITAN_GE_READ(0x4958);
reg_data |= 0x100000;
TITAN_GE_WRITE(0x4958, reg_data);
reg_data |= (0xff << 10) | (2*(0xff + 1));
TITAN_GE_WRITE(0x4958, reg_data);
/*
* BAV2, BAV and DAV settings for the Tx FIFO
*/
reg_data1 = TITAN_GE_READ(0x495c);
reg_data1 = ( (0x1 << 20) | (0x1 << 10) | 0x10);
TITAN_GE_WRITE(0x495c, reg_data1);
reg_data &= ~(0x00100000);
reg_data |= 0x200000;
TITAN_GE_WRITE(0x4958, reg_data);
}
/*
* Step 3: TRTG block enable
*/
reg_data = TITAN_GE_READ(TITAN_GE_TRTG_CONFIG + (port_num << 12));
/*
* This is the 1.2 revision of the chip. It has fix for the
* IP header alignment. Now, the IP header begins at an
* aligned address and this wont need an extra copy in the
* driver. This performance drawback existed in the previous
* versions of the silicon
*/
reg_data_1 = TITAN_GE_READ(0x103c + (port_num << 12));
reg_data_1 |= 0x40000000;
TITAN_GE_WRITE((0x103c + (port_num << 12)), reg_data_1);
reg_data_1 |= 0x04000000;
TITAN_GE_WRITE((0x103c + (port_num << 12)), reg_data_1);
mdelay(5);
reg_data_1 &= ~(0x04000000);
TITAN_GE_WRITE((0x103c + (port_num << 12)), reg_data_1);
mdelay(5);
reg_data |= 0x0001;
TITAN_GE_WRITE((TITAN_GE_TRTG_CONFIG + (port_num << 12)), reg_data);
/*
* Step 4: Start the Tx activity
*/
TITAN_GE_WRITE((TITAN_GE_TMAC_CONFIG_2 + (port_num << 12)), 0xe197);
#ifdef TITAN_GE_JUMBO_FRAMES
TITAN_GE_WRITE((0x1258 + (port_num << 12)), 0x4000);
#endif
reg_data = TITAN_GE_READ(TITAN_GE_TMAC_CONFIG_1 + (port_num << 12));
reg_data |= 0x0001; /* Enable TMAC */
reg_data |= 0x6c70; /* PAUSE also set */
TITAN_GE_WRITE((TITAN_GE_TMAC_CONFIG_1 + (port_num << 12)), reg_data);
udelay(30);
/* Destination Address drop bit */
reg_data = TITAN_GE_READ(TITAN_GE_RMAC_CONFIG_2 + (port_num << 12));
reg_data |= 0x218; /* DA_DROP bit and pause */
TITAN_GE_WRITE((TITAN_GE_RMAC_CONFIG_2 + (port_num << 12)), reg_data);
TITAN_GE_WRITE((0x1218 + (port_num << 12)), 0x3);
#ifdef TITAN_GE_JUMBO_FRAMES
TITAN_GE_WRITE((0x1208 + (port_num << 12)), 0x4000);
#endif
/* Start the Rx activity */
reg_data = TITAN_GE_READ(TITAN_GE_RMAC_CONFIG_1 + (port_num << 12));
reg_data |= 0x0001; /* RMAC Enable */
reg_data |= 0x0010; /* CRC Check enable */
reg_data |= 0x0040; /* Min Frame check enable */
reg_data |= 0x4400; /* Max Frame check enable */
TITAN_GE_WRITE((TITAN_GE_RMAC_CONFIG_1 + (port_num << 12)), reg_data);
udelay(30);
/*
* Enable the Interrupts for Tx and Rx
*/
reg_data1 = TITAN_GE_READ(TITAN_GE_INTR_XDMA_IE);
if (port_num == 0) {
reg_data1 |= 0x3;
#ifdef CONFIG_SMP
TITAN_GE_WRITE(0x0038, 0x003);
#else
TITAN_GE_WRITE(0x0038, 0x303);
#endif
}
if (port_num == 1) {
reg_data1 |= 0x300;
}
if (port_num == 2)
reg_data1 |= 0x30000;
TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_IE, reg_data1);
TITAN_GE_WRITE(0x003c, 0x300);
if (config_done == 0) {
TITAN_GE_WRITE(0x0024, 0x04000024); /* IRQ vector */
TITAN_GE_WRITE(0x0020, 0x000fb000); /* INTMSG base */
}
/* Priority */
reg_data = TITAN_GE_READ(0x1038 + (port_num << 12));
reg_data &= ~(0x00f00000);
TITAN_GE_WRITE((0x1038 + (port_num << 12)), reg_data);
/* Step 5: GMII config */
titan_ge_gmii_config(port_num);
if (config_done == 0) {
TITAN_GE_WRITE(0x1a80, 0);
config_done = 1;
}
return TITAN_OK;
}
/*
* Function to queue the packet for the Ethernet device
*/
static void titan_ge_tx_queue(titan_ge_port_info * titan_ge_eth,
struct sk_buff * skb)
{
struct device *device = &titan_ge_device[titan_ge_eth->port_num]->dev;
unsigned int curr_desc = titan_ge_eth->tx_curr_desc_q;
volatile titan_ge_tx_desc *tx_curr;
int port_num = titan_ge_eth->port_num;
tx_curr = &(titan_ge_eth->tx_desc_area[curr_desc]);
tx_curr->buffer_addr =
dma_map_single(device, skb->data, skb_headlen(skb),
DMA_TO_DEVICE);
titan_ge_eth->tx_skb[curr_desc] = (struct sk_buff *) skb;
tx_curr->buffer_len = skb_headlen(skb);
/* Last descriptor enables interrupt and changes ownership */
tx_curr->cmd_sts = 0x1 | (1 << 15) | (1 << 5);
/* Kick the XDMA to start the transfer from memory to the FIFO */
TITAN_GE_WRITE((0x5044 + (port_num << 8)), 0x1);
/* Current descriptor updated */
titan_ge_eth->tx_curr_desc_q = (curr_desc + 1) % TITAN_GE_TX_QUEUE;
/* Prefetch the next descriptor */
prefetch((const void *)
&titan_ge_eth->tx_desc_area[titan_ge_eth->tx_curr_desc_q]);
}
/*
* Actually does the open of the Ethernet device
*/
static int titan_ge_eth_open(struct net_device *netdev)
{
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
unsigned int port_num = titan_ge_eth->port_num;
struct device *device = &titan_ge_device[port_num]->dev;
unsigned long reg_data;
unsigned int phy_reg;
int err = 0;
/* Stop the Rx activity */
reg_data = TITAN_GE_READ(TITAN_GE_RMAC_CONFIG_1 + (port_num << 12));
reg_data &= ~(0x00000001);
TITAN_GE_WRITE((TITAN_GE_RMAC_CONFIG_1 + (port_num << 12)), reg_data);
/* Clear the port interrupts */
TITAN_GE_WRITE((TITAN_GE_CHANNEL0_INTERRUPT + (port_num << 8)), 0x0);
if (config_done == 0) {
TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_CORE_A, 0);
TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_CORE_B, 0);
}
/* Set the MAC Address */
memcpy(titan_ge_eth->port_mac_addr, netdev->dev_addr, 6);
if (config_done == 0)
titan_port_init(netdev, titan_ge_eth);
titan_ge_update_afx(titan_ge_eth);
/* Allocate the Tx ring now */
titan_ge_eth->tx_ring_skbs = 0;
titan_ge_eth->tx_ring_size = TITAN_GE_TX_QUEUE;
/* Allocate space in the SRAM for the descriptors */
titan_ge_eth->tx_desc_area = (titan_ge_tx_desc *)
(titan_ge_sram + TITAN_TX_RING_BYTES * port_num);
titan_ge_eth->tx_dma = TITAN_SRAM_BASE + TITAN_TX_RING_BYTES * port_num;
if (!titan_ge_eth->tx_desc_area) {
printk(KERN_ERR
"%s: Cannot allocate Tx Ring (size %d bytes) for port %d\n",
netdev->name, TITAN_TX_RING_BYTES, port_num);
return -ENOMEM;
}
memset(titan_ge_eth->tx_desc_area, 0, titan_ge_eth->tx_desc_area_size);
/* Now initialize the Tx descriptor ring */
titan_ge_init_tx_desc_ring(titan_ge_eth,
titan_ge_eth->tx_ring_size,
(unsigned long) titan_ge_eth->tx_desc_area,
(unsigned long) titan_ge_eth->tx_dma);
/* Allocate the Rx ring now */
titan_ge_eth->rx_ring_size = TITAN_GE_RX_QUEUE;
titan_ge_eth->rx_ring_skbs = 0;
titan_ge_eth->rx_desc_area =
(titan_ge_rx_desc *)(titan_ge_sram + 0x1000 + TITAN_RX_RING_BYTES * port_num);
titan_ge_eth->rx_dma = TITAN_SRAM_BASE + 0x1000 + TITAN_RX_RING_BYTES * port_num;
if (!titan_ge_eth->rx_desc_area) {
printk(KERN_ERR "%s: Cannot allocate Rx Ring (size %d bytes)\n",
netdev->name, TITAN_RX_RING_BYTES);
printk(KERN_ERR "%s: Freeing previously allocated TX queues...",
netdev->name);
dma_free_coherent(device, titan_ge_eth->tx_desc_area_size,
(void *) titan_ge_eth->tx_desc_area,
titan_ge_eth->tx_dma);
return -ENOMEM;
}
memset(titan_ge_eth->rx_desc_area, 0, titan_ge_eth->rx_desc_area_size);
/* Now initialize the Rx ring */
#ifdef TITAN_GE_JUMBO_FRAMES
if ((titan_ge_init_rx_desc_ring
(titan_ge_eth, titan_ge_eth->rx_ring_size, TITAN_GE_JUMBO_BUFSIZE,
(unsigned long) titan_ge_eth->rx_desc_area, 0,
(unsigned long) titan_ge_eth->rx_dma)) == 0)
#else
if ((titan_ge_init_rx_desc_ring
(titan_ge_eth, titan_ge_eth->rx_ring_size, TITAN_GE_STD_BUFSIZE,
(unsigned long) titan_ge_eth->rx_desc_area, 0,
(unsigned long) titan_ge_eth->rx_dma)) == 0)
#endif
panic("%s: Error initializing RX Ring\n", netdev->name);
/* Fill the Rx ring with the SKBs */
titan_ge_port_start(netdev, titan_ge_eth);
/*
* Check if Interrupt Coalscing needs to be turned on. The
* values specified in the register is multiplied by
* (8 x 64 nanoseconds) to determine when an interrupt should
* be sent to the CPU.
*/
if (TITAN_GE_TX_COAL) {
titan_ge_eth->tx_int_coal =
titan_ge_tx_coal(TITAN_GE_TX_COAL, port_num);
}
err = titan_ge_mdio_read(port_num, TITAN_GE_MDIO_PHY_STATUS, &phy_reg);
if (err == TITAN_GE_MDIO_ERROR) {
printk(KERN_ERR
"Could not read PHY control register 0x11 \n");
return TITAN_ERROR;
}
if (!(phy_reg & 0x0400)) {
netif_carrier_off(netdev);
netif_stop_queue(netdev);
return TITAN_ERROR;
} else {
netif_carrier_on(netdev);
netif_start_queue(netdev);
}
return TITAN_OK;
}
/*
* Queue the packet for Tx. Currently no support for zero copy,
* checksum offload and Scatter Gather. The chip does support
* Scatter Gather only. But, that wont help here since zero copy
* requires support for Tx checksumming also.
*/
int titan_ge_start_xmit(struct sk_buff *skb, struct net_device *netdev)
{
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
unsigned long flags;
struct net_device_stats *stats;
//printk("titan_ge_start_xmit\n");
stats = &titan_ge_eth->stats;
spin_lock_irqsave(&titan_ge_eth->lock, flags);
if ((TITAN_GE_TX_QUEUE - titan_ge_eth->tx_ring_skbs) <=
(skb_shinfo(skb)->nr_frags + 1)) {
netif_stop_queue(netdev);
spin_unlock_irqrestore(&titan_ge_eth->lock, flags);
printk(KERN_ERR "Tx OOD \n");
return 1;
}
titan_ge_tx_queue(titan_ge_eth, skb);
titan_ge_eth->tx_ring_skbs++;
if (TITAN_GE_TX_QUEUE <= (titan_ge_eth->tx_ring_skbs + 4)) {
spin_unlock_irqrestore(&titan_ge_eth->lock, flags);
titan_ge_free_tx_queue(titan_ge_eth);
spin_lock_irqsave(&titan_ge_eth->lock, flags);
}
stats->tx_bytes += skb->len;
stats->tx_packets++;
spin_unlock_irqrestore(&titan_ge_eth->lock, flags);
netdev->trans_start = jiffies;
return 0;
}
/*
* Actually does the Rx. Rx side checksumming supported.
*/
static int titan_ge_rx(struct net_device *netdev, int port_num,
titan_ge_port_info * titan_ge_port,
titan_ge_packet * packet)
{
int rx_curr_desc, rx_used_desc;
volatile titan_ge_rx_desc *rx_desc;
rx_curr_desc = titan_ge_port->rx_curr_desc_q;
rx_used_desc = titan_ge_port->rx_used_desc_q;
if (((rx_curr_desc + 1) % TITAN_GE_RX_QUEUE) == rx_used_desc)
return TITAN_ERROR;
rx_desc = &(titan_ge_port->rx_desc_area[rx_curr_desc]);
if (rx_desc->cmd_sts & TITAN_GE_RX_BUFFER_OWNED)
return TITAN_ERROR;
packet->skb = titan_ge_port->rx_skb[rx_curr_desc];
packet->len = (rx_desc->cmd_sts & 0x7fff);
/*
* At this point, we dont know if the checksumming
* actually helps relieve CPU. So, keep it for
* port 0 only
*/
packet->checksum = ntohs((rx_desc->buffer & 0xffff0000) >> 16);
packet->cmd_sts = rx_desc->cmd_sts;
titan_ge_port->rx_curr_desc_q = (rx_curr_desc + 1) % TITAN_GE_RX_QUEUE;
/* Prefetch the next descriptor */
prefetch((const void *)
&titan_ge_port->rx_desc_area[titan_ge_port->rx_curr_desc_q + 1]);
return TITAN_OK;
}
/*
* Free the Tx queue of the used SKBs
*/
static int titan_ge_free_tx_queue(titan_ge_port_info *titan_ge_eth)
{
unsigned long flags;
/* Take the lock */
spin_lock_irqsave(&(titan_ge_eth->lock), flags);
while (titan_ge_return_tx_desc(titan_ge_eth, titan_ge_eth->port_num) == 0)
if (titan_ge_eth->tx_ring_skbs != 1)
titan_ge_eth->tx_ring_skbs--;
spin_unlock_irqrestore(&titan_ge_eth->lock, flags);
return TITAN_OK;
}
/*
* Threshold beyond which we do the cleaning of
* Tx queue and new allocation for the Rx
* queue
*/
#define TX_THRESHOLD 4
#define RX_THRESHOLD 10
/*
* Receive the packets and send it to the kernel.
*/
static int titan_ge_receive_queue(struct net_device *netdev, unsigned int max)
{
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
unsigned int port_num = titan_ge_eth->port_num;
titan_ge_packet packet;
struct net_device_stats *stats;
struct sk_buff *skb;
unsigned long received_packets = 0;
unsigned int ack;
stats = &titan_ge_eth->stats;
while ((--max)
&& (titan_ge_rx(netdev, port_num, titan_ge_eth, &packet) == TITAN_OK)) {
skb = (struct sk_buff *) packet.skb;
titan_ge_eth->rx_ring_skbs--;
if (--titan_ge_eth->rx_work_limit < 0)
break;
received_packets++;
stats->rx_packets++;
stats->rx_bytes += packet.len;
if ((packet.cmd_sts & TITAN_GE_RX_PERR) ||
(packet.cmd_sts & TITAN_GE_RX_OVERFLOW_ERROR) ||
(packet.cmd_sts & TITAN_GE_RX_TRUNC) ||
(packet.cmd_sts & TITAN_GE_RX_CRC_ERROR)) {
stats->rx_dropped++;
dev_kfree_skb_any(skb);
continue;
}
/*
* Either support fast path or slow path. Decision
* making can really slow down the performance. The
* idea is to cut down the number of checks and improve
* the fastpath.
*/
skb_put(skb, packet.len - 2);
/*
* Increment data pointer by two since thats where
* the MAC starts
*/
skb_reserve(skb, 2);
skb->protocol = eth_type_trans(skb, netdev);
netif_receive_skb(skb);
if (titan_ge_eth->rx_threshold > RX_THRESHOLD) {
ack = titan_ge_rx_task(netdev, titan_ge_eth);
TITAN_GE_WRITE((0x5048 + (port_num << 8)), ack);
titan_ge_eth->rx_threshold = 0;
} else
titan_ge_eth->rx_threshold++;
if (titan_ge_eth->tx_threshold > TX_THRESHOLD) {
titan_ge_eth->tx_threshold = 0;
titan_ge_free_tx_queue(titan_ge_eth);
}
else
titan_ge_eth->tx_threshold++;
}
return received_packets;
}
/*
* Enable the Rx side interrupts
*/
static void titan_ge_enable_int(unsigned int port_num,
titan_ge_port_info *titan_ge_eth,
struct net_device *netdev)
{
unsigned long reg_data = TITAN_GE_READ(TITAN_GE_INTR_XDMA_IE);
if (port_num == 0)
reg_data |= 0x3;
if (port_num == 1)
reg_data |= 0x300;
if (port_num == 2)
reg_data |= 0x30000;
/* Re-enable interrupts */
TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_IE, reg_data);
}
/*
* Main function to handle the polling for Rx side NAPI.
* Receive interrupts have been disabled at this point.
* The poll schedules the transmit followed by receive.
*/
static int titan_ge_poll(struct net_device *netdev, int *budget)
{
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
int port_num = titan_ge_eth->port_num;
int work_done = 0;
unsigned long flags, status;
titan_ge_eth->rx_work_limit = *budget;
if (titan_ge_eth->rx_work_limit > netdev->quota)
titan_ge_eth->rx_work_limit = netdev->quota;
do {
/* Do the transmit cleaning work here */
titan_ge_free_tx_queue(titan_ge_eth);
/* Ack the Rx interrupts */
if (port_num == 0)
TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_CORE_A, 0x3);
if (port_num == 1)
TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_CORE_A, 0x300);
if (port_num == 2)
TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_CORE_A, 0x30000);
work_done += titan_ge_receive_queue(netdev, 0);
/* Out of quota and there is work to be done */
if (titan_ge_eth->rx_work_limit < 0)
goto not_done;
/* Receive alloc_skb could lead to OOM */
if (oom_flag == 1) {
oom_flag = 0;
goto oom;
}
status = TITAN_GE_READ(TITAN_GE_INTR_XDMA_CORE_A);
} while (status & 0x30300);
/* If we are here, then no more interrupts to process */
goto done;
not_done:
*budget -= work_done;
netdev->quota -= work_done;
return 1;
oom:
printk(KERN_ERR "OOM \n");
netif_rx_complete(netdev);
return 0;
done:
/*
* No more packets on the poll list. Turn the interrupts
* back on and we should be able to catch the new
* packets in the interrupt handler
*/
if (!work_done)
work_done = 1;
*budget -= work_done;
netdev->quota -= work_done;
spin_lock_irqsave(&titan_ge_eth->lock, flags);
/* Remove us from the poll list */
netif_rx_complete(netdev);
/* Re-enable interrupts */
titan_ge_enable_int(port_num, titan_ge_eth, netdev);
spin_unlock_irqrestore(&titan_ge_eth->lock, flags);
return 0;
}
/*
* Close the network device
*/
int titan_ge_stop(struct net_device *netdev)
{
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
spin_lock_irq(&(titan_ge_eth->lock));
titan_ge_eth_stop(netdev);
free_irq(netdev->irq, netdev);
spin_unlock_irq(&titan_ge_eth->lock);
return TITAN_OK;
}
/*
* Free the Tx ring
*/
static void titan_ge_free_tx_rings(struct net_device *netdev)
{
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
unsigned int port_num = titan_ge_eth->port_num;
unsigned int curr;
unsigned long reg_data;
/* Stop the Tx DMA */
reg_data = TITAN_GE_READ(TITAN_GE_CHANNEL0_CONFIG +
(port_num << 8));
reg_data |= 0xc0000000;
TITAN_GE_WRITE((TITAN_GE_CHANNEL0_CONFIG +
(port_num << 8)), reg_data);
/* Disable the TMAC */
reg_data = TITAN_GE_READ(TITAN_GE_TMAC_CONFIG_1 +
(port_num << 12));
reg_data &= ~(0x00000001);
TITAN_GE_WRITE((TITAN_GE_TMAC_CONFIG_1 +
(port_num << 12)), reg_data);
for (curr = 0;
(titan_ge_eth->tx_ring_skbs) && (curr < TITAN_GE_TX_QUEUE);
curr++) {
if (titan_ge_eth->tx_skb[curr]) {
dev_kfree_skb(titan_ge_eth->tx_skb[curr]);
titan_ge_eth->tx_ring_skbs--;
}
}
if (titan_ge_eth->tx_ring_skbs != 0)
printk
("%s: Error on Tx descriptor free - could not free %d"
" descriptors\n", netdev->name,
titan_ge_eth->tx_ring_skbs);
#ifndef TITAN_RX_RING_IN_SRAM
dma_free_coherent(&titan_ge_device[port_num]->dev,
titan_ge_eth->tx_desc_area_size,
(void *) titan_ge_eth->tx_desc_area,
titan_ge_eth->tx_dma);
#endif
}
/*
* Free the Rx ring
*/
static void titan_ge_free_rx_rings(struct net_device *netdev)
{
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
unsigned int port_num = titan_ge_eth->port_num;
unsigned int curr;
unsigned long reg_data;
/* Stop the Rx DMA */
reg_data = TITAN_GE_READ(TITAN_GE_CHANNEL0_CONFIG +
(port_num << 8));
reg_data |= 0x000c0000;
TITAN_GE_WRITE((TITAN_GE_CHANNEL0_CONFIG +
(port_num << 8)), reg_data);
/* Disable the RMAC */
reg_data = TITAN_GE_READ(TITAN_GE_RMAC_CONFIG_1 +
(port_num << 12));
reg_data &= ~(0x00000001);
TITAN_GE_WRITE((TITAN_GE_RMAC_CONFIG_1 +
(port_num << 12)), reg_data);
for (curr = 0;
titan_ge_eth->rx_ring_skbs && (curr < TITAN_GE_RX_QUEUE);
curr++) {
if (titan_ge_eth->rx_skb[curr]) {
dev_kfree_skb(titan_ge_eth->rx_skb[curr]);
titan_ge_eth->rx_ring_skbs--;
}
}
if (titan_ge_eth->rx_ring_skbs != 0)
printk(KERN_ERR
"%s: Error in freeing Rx Ring. %d skb's still"
" stuck in RX Ring - ignoring them\n", netdev->name,
titan_ge_eth->rx_ring_skbs);
#ifndef TITAN_RX_RING_IN_SRAM
dma_free_coherent(&titan_ge_device[port_num]->dev,
titan_ge_eth->rx_desc_area_size,
(void *) titan_ge_eth->rx_desc_area,
titan_ge_eth->rx_dma);
#endif
}
/*
* Actually does the stop of the Ethernet device
*/
static void titan_ge_eth_stop(struct net_device *netdev)
{
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
netif_stop_queue(netdev);
titan_ge_port_reset(titan_ge_eth->port_num);
titan_ge_free_tx_rings(netdev);
titan_ge_free_rx_rings(netdev);
/* Disable the Tx and Rx Interrupts for all channels */
TITAN_GE_WRITE(TITAN_GE_INTR_XDMA_IE, 0x0);
}
/*
* Update the MAC address. Note that we have to write the
* address in three station registers, 16 bits each. And this
* has to be done for TMAC and RMAC
*/
static void titan_ge_update_mac_address(struct net_device *netdev)
{
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
unsigned int port_num = titan_ge_eth->port_num;
u8 p_addr[6];
memcpy(titan_ge_eth->port_mac_addr, netdev->dev_addr, 6);
memcpy(p_addr, netdev->dev_addr, 6);
/* Update the Address Filtering Match tables */
titan_ge_update_afx(titan_ge_eth);
printk("Station MAC : %d %d %d %d %d %d \n",
p_addr[5], p_addr[4], p_addr[3],
p_addr[2], p_addr[1], p_addr[0]);
/* Set the MAC address here for TMAC and RMAC */
TITAN_GE_WRITE((TITAN_GE_TMAC_STATION_HI + (port_num << 12)),
((p_addr[5] << 8) | p_addr[4]));
TITAN_GE_WRITE((TITAN_GE_TMAC_STATION_MID + (port_num << 12)),
((p_addr[3] << 8) | p_addr[2]));
TITAN_GE_WRITE((TITAN_GE_TMAC_STATION_LOW + (port_num << 12)),
((p_addr[1] << 8) | p_addr[0]));
TITAN_GE_WRITE((TITAN_GE_RMAC_STATION_HI + (port_num << 12)),
((p_addr[5] << 8) | p_addr[4]));
TITAN_GE_WRITE((TITAN_GE_RMAC_STATION_MID + (port_num << 12)),
((p_addr[3] << 8) | p_addr[2]));
TITAN_GE_WRITE((TITAN_GE_RMAC_STATION_LOW + (port_num << 12)),
((p_addr[1] << 8) | p_addr[0]));
}
/*
* Set the MAC address of the Ethernet device
*/
static int titan_ge_set_mac_address(struct net_device *dev, void *addr)
{
titan_ge_port_info *tp = netdev_priv(dev);
struct sockaddr *sa = addr;
memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
spin_lock_irq(&tp->lock);
titan_ge_update_mac_address(dev);
spin_unlock_irq(&tp->lock);
return 0;
}
/*
* Get the Ethernet device stats
*/
static struct net_device_stats *titan_ge_get_stats(struct net_device *netdev)
{
titan_ge_port_info *titan_ge_eth = netdev_priv(netdev);
return &titan_ge_eth->stats;
}
/*
* Initialize the Rx descriptor ring for the Titan Ge
*/
static int titan_ge_init_rx_desc_ring(titan_ge_port_info * titan_eth_port,
int rx_desc_num,
int rx_buff_size,
unsigned long rx_desc_base_addr,
unsigned long rx_buff_base_addr,
unsigned long rx_dma)
{
volatile titan_ge_rx_desc *rx_desc;
unsigned long buffer_addr;
int index;
unsigned long titan_ge_rx_desc_bus = rx_dma;
buffer_addr = rx_buff_base_addr;
rx_desc = (titan_ge_rx_desc *) rx_desc_base_addr;
/* Check alignment */
if (rx_buff_base_addr & 0xF)
return 0;
/* Check Rx buffer size */
if ((rx_buff_size < 8) || (rx_buff_size > TITAN_GE_MAX_RX_BUFFER))
return 0;
/* 64-bit alignment
if ((rx_buff_base_addr + rx_buff_size) & 0x7)
return 0; */
/* Initialize the Rx desc ring */
for (index = 0; index < rx_desc_num; index++) {
titan_ge_rx_desc_bus += sizeof(titan_ge_rx_desc);
rx_desc[index].cmd_sts = 0;
rx_desc[index].buffer_addr = buffer_addr;
titan_eth_port->rx_skb[index] = NULL;
buffer_addr += rx_buff_size;
}
titan_eth_port->rx_curr_desc_q = 0;
titan_eth_port->rx_used_desc_q = 0;
titan_eth_port->rx_desc_area = (titan_ge_rx_desc *) rx_desc_base_addr;
titan_eth_port->rx_desc_area_size =
rx_desc_num * sizeof(titan_ge_rx_desc);
titan_eth_port->rx_dma = rx_dma;
return TITAN_OK;
}
/*
* Initialize the Tx descriptor ring. Descriptors in the SRAM
*/
static int titan_ge_init_tx_desc_ring(titan_ge_port_info * titan_ge_port,
int tx_desc_num,
unsigned long tx_desc_base_addr,
unsigned long tx_dma)
{
titan_ge_tx_desc *tx_desc;
int index;
unsigned long titan_ge_tx_desc_bus = tx_dma;
if (tx_desc_base_addr & 0xF)
return 0;
tx_desc = (titan_ge_tx_desc *) tx_desc_base_addr;
for (index = 0; index < tx_desc_num; index++) {
titan_ge_port->tx_dma_array[index] =
(dma_addr_t) titan_ge_tx_desc_bus;
titan_ge_tx_desc_bus += sizeof(titan_ge_tx_desc);
tx_desc[index].cmd_sts = 0x0000;
tx_desc[index].buffer_len = 0;
tx_desc[index].buffer_addr = 0x00000000;
titan_ge_port->tx_skb[index] = NULL;
}
titan_ge_port->tx_curr_desc_q = 0;
titan_ge_port->tx_used_desc_q = 0;
titan_ge_port->tx_desc_area = (titan_ge_tx_desc *) tx_desc_base_addr;
titan_ge_port->tx_desc_area_size =
tx_desc_num * sizeof(titan_ge_tx_desc);
titan_ge_port->tx_dma = tx_dma;
return TITAN_OK;
}
/*
* Initialize the device as an Ethernet device
*/
static int __init titan_ge_probe(struct device *device)
{
titan_ge_port_info *titan_ge_eth;
struct net_device *netdev;
int port = to_platform_device(device)->id;
int err;
netdev = alloc_etherdev(sizeof(titan_ge_port_info));
if (!netdev) {
err = -ENODEV;
goto out;
}
netdev->open = titan_ge_open;
netdev->stop = titan_ge_stop;
netdev->hard_start_xmit = titan_ge_start_xmit;
netdev->get_stats = titan_ge_get_stats;
netdev->set_multicast_list = titan_ge_set_multi;
netdev->set_mac_address = titan_ge_set_mac_address;
/* Tx timeout */
netdev->tx_timeout = titan_ge_tx_timeout;
netdev->watchdog_timeo = 2 * HZ;
/* Set these to very high values */
netdev->poll = titan_ge_poll;
netdev->weight = 64;
netdev->tx_queue_len = TITAN_GE_TX_QUEUE;
netif_carrier_off(netdev);
netdev->base_addr = 0;
netdev->change_mtu = titan_ge_change_mtu;
titan_ge_eth = netdev_priv(netdev);
/* Allocation of memory for the driver structures */
titan_ge_eth->port_num = port;
/* Configure the Tx timeout handler */
INIT_WORK(&titan_ge_eth->tx_timeout_task,
(void (*)(void *)) titan_ge_tx_timeout_task, netdev);
spin_lock_init(&titan_ge_eth->lock);
/* set MAC addresses */
memcpy(netdev->dev_addr, titan_ge_mac_addr_base, 6);
netdev->dev_addr[5] += port;
err = register_netdev(netdev);
if (err)
goto out_free_netdev;
printk(KERN_NOTICE
"%s: port %d with MAC address %02x:%02x:%02x:%02x:%02x:%02x\n",
netdev->name, port, netdev->dev_addr[0],
netdev->dev_addr[1], netdev->dev_addr[2],
netdev->dev_addr[3], netdev->dev_addr[4],
netdev->dev_addr[5]);
printk(KERN_NOTICE "Rx NAPI supported, Tx Coalescing ON \n");
return 0;
out_free_netdev:
kfree(netdev);
out:
return err;
}
static void __devexit titan_device_remove(struct device *device)
{
}
/*
* Reset the Ethernet port
*/
static void titan_ge_port_reset(unsigned int port_num)
{
unsigned int reg_data;
/* Stop the Tx port activity */
reg_data = TITAN_GE_READ(TITAN_GE_TMAC_CONFIG_1 +
(port_num << 12));
reg_data &= ~(0x0001);
TITAN_GE_WRITE((TITAN_GE_TMAC_CONFIG_1 +
(port_num << 12)), reg_data);
/* Stop the Rx port activity */
reg_data = TITAN_GE_READ(TITAN_GE_RMAC_CONFIG_1 +
(port_num << 12));
reg_data &= ~(0x0001);
TITAN_GE_WRITE((TITAN_GE_RMAC_CONFIG_1 +
(port_num << 12)), reg_data);
return;
}
/*
* Return the Tx desc after use by the XDMA
*/
static int titan_ge_return_tx_desc(titan_ge_port_info * titan_ge_eth, int port)
{
int tx_desc_used;
struct sk_buff *skb;
tx_desc_used = titan_ge_eth->tx_used_desc_q;
/* return right away */
if (tx_desc_used == titan_ge_eth->tx_curr_desc_q)
return TITAN_ERROR;
/* Now the critical stuff */
skb = titan_ge_eth->tx_skb[tx_desc_used];
dev_kfree_skb_any(skb);
titan_ge_eth->tx_skb[tx_desc_used] = NULL;
titan_ge_eth->tx_used_desc_q =
(tx_desc_used + 1) % TITAN_GE_TX_QUEUE;
return 0;
}
/*
* Coalescing for the Tx path
*/
static unsigned long titan_ge_tx_coal(unsigned long delay, int port)
{
unsigned long rx_delay;
rx_delay = TITAN_GE_READ(TITAN_GE_INT_COALESCING);
delay = (delay << 16) | rx_delay;
TITAN_GE_WRITE(TITAN_GE_INT_COALESCING, delay);
TITAN_GE_WRITE(0x5038, delay);
return delay;
}
static struct device_driver titan_soc_driver = {
.name = titan_string,
.bus = &platform_bus_type,
.probe = titan_ge_probe,
.remove = __devexit_p(titan_device_remove),
};
static void titan_platform_release (struct device *device)
{
struct platform_device *pldev;
/* free device */
pldev = to_platform_device (device);
kfree (pldev);
}
/*
* Register the Titan GE with the kernel
*/
static int __init titan_ge_init_module(void)
{
struct platform_device *pldev;
unsigned int version, device;
int i;
printk(KERN_NOTICE
"PMC-Sierra TITAN 10/100/1000 Ethernet Driver \n");
titan_ge_base = (unsigned long) ioremap(TITAN_GE_BASE, TITAN_GE_SIZE);
if (!titan_ge_base) {
printk("Mapping Titan GE failed\n");
goto out;
}
device = TITAN_GE_READ(TITAN_GE_DEVICE_ID);
version = (device & 0x000f0000) >> 16;
device &= 0x0000ffff;
printk(KERN_NOTICE "Device Id : %x, Version : %x \n", device, version);
#ifdef TITAN_RX_RING_IN_SRAM
titan_ge_sram = (unsigned long) ioremap(TITAN_SRAM_BASE,
TITAN_SRAM_SIZE);
if (!titan_ge_sram) {
printk("Mapping Titan SRAM failed\n");
goto out_unmap_ge;
}
#endif
if (driver_register(&titan_soc_driver)) {
printk(KERN_ERR "Driver registration failed\n");
goto out_unmap_sram;
}
for (i = 0; i < 3; i++) {
titan_ge_device[i] = NULL;
if (!(pldev = kmalloc (sizeof (*pldev), GFP_KERNEL)))
continue;
memset (pldev, 0, sizeof (*pldev));
pldev->name = titan_string;
pldev->id = i;
pldev->dev.release = titan_platform_release;
titan_ge_device[i] = pldev;
if (platform_device_register (pldev)) {
kfree (pldev);
titan_ge_device[i] = NULL;
continue;
}
if (!pldev->dev.driver) {
/*
* The driver was not bound to this device, there was
* no hardware at this address. Unregister it, as the
* release fuction will take care of freeing the
* allocated structure
*/
titan_ge_device[i] = NULL;
platform_device_unregister (pldev);
}
}
return 0;
out_unmap_sram:
iounmap((void *)titan_ge_sram);
out_unmap_ge:
iounmap((void *)titan_ge_base);
out:
return -ENOMEM;
}
/*
* Unregister the Titan GE from the kernel
*/
static void __exit titan_ge_cleanup_module(void)
{
int i;
driver_unregister(&titan_soc_driver);
for (i = 0; i < 3; i++) {
if (titan_ge_device[i]) {
platform_device_unregister (titan_ge_device[i]);
titan_ge_device[i] = NULL;
}
}
iounmap((void *)titan_ge_sram);
iounmap((void *)titan_ge_base);
}
MODULE_AUTHOR("Manish Lachwani <lachwani@pmc-sierra.com>");
MODULE_DESCRIPTION("Titan GE Ethernet driver");
MODULE_LICENSE("GPL");
module_init(titan_ge_init_module);
module_exit(titan_ge_cleanup_module);