| # |
| # IIO Digital Gyroscope Sensor drivers configuration |
| # |
| # When adding new entries keep the list in alphabetical order |
| |
| menu "Digital gyroscope sensors" |
| |
| config ADIS16080 |
| tristate "Analog Devices ADIS16080/100 Yaw Rate Gyroscope with SPI driver" |
| depends on SPI |
| help |
| Say yes here to build support for Analog Devices ADIS16080, ADIS16100 Yaw |
| Rate Gyroscope with SPI. |
| |
| config ADIS16130 |
| tristate "Analog Devices ADIS16130 High Precision Angular Rate Sensor driver" |
| depends on SPI |
| help |
| Say yes here to build support for Analog Devices ADIS16130 High Precision |
| Angular Rate Sensor driver. |
| |
| config ADIS16136 |
| tristate "Analog devices ADIS16136 and similar gyroscopes driver" |
| depends on SPI_MASTER |
| select IIO_ADIS_LIB |
| select IIO_ADIS_LIB_BUFFER if IIO_BUFFER |
| help |
| Say yes here to build support for the Analog Devices ADIS16133, ADIS16135, |
| ADIS16136 gyroscope devices. |
| |
| config ADIS16260 |
| tristate "Analog Devices ADIS16260 Digital Gyroscope Sensor SPI driver" |
| depends on SPI |
| select IIO_ADIS_LIB |
| select IIO_ADIS_LIB_BUFFER if IIO_BUFFER |
| help |
| Say yes here to build support for Analog Devices ADIS16260 ADIS16265 |
| ADIS16250 ADIS16255 and ADIS16251 programmable digital gyroscope sensors. |
| |
| This driver can also be built as a module. If so, the module |
| will be called adis16260. |
| |
| config ADXRS450 |
| tristate "Analog Devices ADXRS450/3 Digital Output Gyroscope SPI driver" |
| depends on SPI |
| help |
| Say yes here to build support for Analog Devices ADXRS450 and ADXRS453 |
| programmable digital output gyroscope. |
| |
| This driver can also be built as a module. If so, the module |
| will be called adxrs450. |
| |
| config BMG160 |
| tristate "BOSCH BMG160 Gyro Sensor" |
| depends on I2C |
| select IIO_TRIGGERED_BUFFER if IIO_BUFFER |
| help |
| Say yes here to build support for Bosch BMG160 Tri-axis Gyro Sensor |
| driver. This driver also supports BMI055 gyroscope. |
| |
| This driver can also be built as a module. If so, the module |
| will be called bmg160. |
| |
| config HID_SENSOR_GYRO_3D |
| depends on HID_SENSOR_HUB |
| select IIO_BUFFER |
| select IIO_TRIGGERED_BUFFER |
| select HID_SENSOR_IIO_COMMON |
| select HID_SENSOR_IIO_TRIGGER |
| tristate "HID Gyroscope 3D" |
| help |
| Say yes here to build support for the HID SENSOR |
| Gyroscope 3D. |
| |
| config IIO_ST_GYRO_3AXIS |
| tristate "STMicroelectronics gyroscopes 3-Axis Driver" |
| depends on (I2C || SPI_MASTER) && SYSFS |
| select IIO_ST_SENSORS_CORE |
| select IIO_ST_GYRO_I2C_3AXIS if (I2C) |
| select IIO_ST_GYRO_SPI_3AXIS if (SPI_MASTER) |
| select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) |
| help |
| Say yes here to build support for STMicroelectronics gyroscopes: |
| L3G4200D, LSM330DL, L3GD20, LSM330DLC, L3G4IS, LSM330. |
| |
| This driver can also be built as a module. If so, these modules |
| will be created: |
| - st_gyro (core functions for the driver [it is mandatory]); |
| - st_gyro_i2c (necessary for the I2C devices [optional*]); |
| - st_gyro_spi (necessary for the SPI devices [optional*]); |
| |
| (*) one of these is necessary to do something. |
| |
| config IIO_ST_GYRO_I2C_3AXIS |
| tristate |
| depends on IIO_ST_GYRO_3AXIS |
| depends on IIO_ST_SENSORS_I2C |
| |
| config IIO_ST_GYRO_SPI_3AXIS |
| tristate |
| depends on IIO_ST_GYRO_3AXIS |
| depends on IIO_ST_SENSORS_SPI |
| |
| config ITG3200 |
| tristate "InvenSense ITG3200 Digital 3-Axis Gyroscope I2C driver" |
| depends on I2C |
| select IIO_TRIGGERED_BUFFER if IIO_BUFFER |
| help |
| Say yes here to add support for the InvenSense ITG3200 digital |
| 3-axis gyroscope sensor. |
| |
| endmenu |
