/*
 *    Copyright IBM Corp 2000, 2011
 *    Author(s): Holger Smolinski <Holger.Smolinski@de.ibm.com>,
 *		 Denis Joseph Barrow,
 */

#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/sigp.h>

#
# store_status
#
# Prerequisites to run this function:
# - Prefix register is set to zero
# - Original prefix register is stored in "dump_prefix_page"
# - Lowcore protection is off
#
ENTRY(store_status)
	/* Save register one and load save area base */
	stg	%r1,__LC_SAVE_AREA_RESTART
	lghi	%r1,SAVE_AREA_BASE
	/* General purpose registers */
	stmg	%r0,%r15,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	lg	%r2,__LC_SAVE_AREA_RESTART
	stg	%r2,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE+8(%r1)
	/* Control registers */
	stctg	%c0,%c15,__LC_CREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	/* Access registers */
	stam	%a0,%a15,__LC_AREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	/* Floating point registers */
	std	%f0, 0x00 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	std	%f1, 0x08 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	std	%f2, 0x10 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	std	%f3, 0x18 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	std	%f4, 0x20 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	std	%f5, 0x28 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	std	%f6, 0x30 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	std	%f7, 0x38 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	std	%f8, 0x40 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	std	%f9, 0x48 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	std	%f10,0x50 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	std	%f11,0x58 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	std	%f12,0x60 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	std	%f13,0x68 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	std	%f14,0x70 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	std	%f15,0x78 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
	/* Floating point control register */
	stfpc	__LC_FP_CREG_SAVE_AREA-SAVE_AREA_BASE(%r1)
	/* CPU timer */
	stpt	__LC_CPU_TIMER_SAVE_AREA-SAVE_AREA_BASE(%r1)
	/* Saved prefix register */
	larl	%r2,dump_prefix_page
	mvc	__LC_PREFIX_SAVE_AREA-SAVE_AREA_BASE(4,%r1),0(%r2)
	/* Clock comparator - seven bytes */
	larl	%r2,.Lclkcmp
	stckc	0(%r2)
	mvc	__LC_CLOCK_COMP_SAVE_AREA-SAVE_AREA_BASE + 1(7,%r1),1(%r2)
	/* Program status word */
	epsw	%r2,%r3
	st	%r2,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 0(%r1)
	st	%r3,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 4(%r1)
	larl	%r2,store_status
	stg	%r2,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 8(%r1)
	br	%r14

	.section .bss
	.align	8
.Lclkcmp:	.quad	0x0000000000000000
	.previous

#
# do_reipl_asm
# Parameter: r2 = schid of reipl device
#

ENTRY(do_reipl_asm)
		basr	%r13,0
.Lpg0:		lpswe	.Lnewpsw-.Lpg0(%r13)
.Lpg1:		brasl	%r14,store_status

		lctlg	%c6,%c6,.Lall-.Lpg0(%r13)
		lgr	%r1,%r2
		mvc	__LC_PGM_NEW_PSW(16),.Lpcnew-.Lpg0(%r13)
		stsch	.Lschib-.Lpg0(%r13)
		oi	.Lschib+5-.Lpg0(%r13),0x84
.Lecs:		xi	.Lschib+27-.Lpg0(%r13),0x01
		msch	.Lschib-.Lpg0(%r13)
		lghi	%r0,5
.Lssch:		ssch	.Liplorb-.Lpg0(%r13)
		jz	.L001
		brct	%r0,.Lssch
		bas	%r14,.Ldisab-.Lpg0(%r13)
.L001:		mvc	__LC_IO_NEW_PSW(16),.Lionew-.Lpg0(%r13)
.Ltpi:		lpswe	.Lwaitpsw-.Lpg0(%r13)
.Lcont:		c	%r1,__LC_SUBCHANNEL_ID
		jnz	.Ltpi
		clc	__LC_IO_INT_PARM(4),.Liplorb-.Lpg0(%r13)
		jnz	.Ltpi
		tsch	.Liplirb-.Lpg0(%r13)
		tm	.Liplirb+9-.Lpg0(%r13),0xbf
		jz	.L002
		bas	%r14,.Ldisab-.Lpg0(%r13)
.L002:		tm	.Liplirb+8-.Lpg0(%r13),0xf3
		jz	.L003
		bas	%r14,.Ldisab-.Lpg0(%r13)
.L003:		st	%r1,__LC_SUBCHANNEL_ID
		lhi	%r1,0		 # mode 0 = esa
		slr	%r0,%r0		 # set cpuid to zero
		sigp	%r1,%r0,SIGP_SET_ARCHITECTURE # switch to esa mode
		lpsw	0
.Ldisab:	sll	%r14,1
		srl	%r14,1		 # need to kill hi bit to avoid specification exceptions.
		st	%r14,.Ldispsw+12-.Lpg0(%r13)
		lpswe	.Ldispsw-.Lpg0(%r13)
		.align	8
.Lall:		.quad	0x00000000ff000000
		.align	16
/*
 * These addresses have to be 31 bit otherwise
 * the sigp will throw a specifcation exception
 * when switching to ESA mode as bit 31 be set
 * in the ESA psw.
 * Bit 31 of the addresses has to be 0 for the
 * 31bit lpswe instruction a fact they appear to have
 * omitted from the pop.
 */
.Lnewpsw:	.quad	0x0000000080000000
		.quad	.Lpg1
.Lpcnew:	.quad	0x0000000080000000
		.quad	.Lecs
.Lionew:	.quad	0x0000000080000000
		.quad	.Lcont
.Lwaitpsw:	.quad	0x0202000080000000
		.quad	.Ltpi
.Ldispsw:	.quad	0x0002000080000000
		.quad	0x0000000000000000
.Liplccws:	.long	0x02000000,0x60000018
		.long	0x08000008,0x20000001
.Liplorb:	.long	0x0049504c,0x0040ff80
		.long	0x00000000+.Liplccws
.Lschib:	.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
.Liplirb:	.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000
		.long	0x00000000,0x00000000