| /* |
| * linux/include/asm-arm/hardware/amba_kmi.h |
| * |
| * Internal header file for AMBA KMI ports |
| * |
| * Copyright (C) 2000 Deep Blue Solutions Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * |
| * --------------------------------------------------------------------------- |
| * From ARM PrimeCell(tm) PS2 Keyboard/Mouse Interface (PL050) Technical |
| * Reference Manual - ARM DDI 0143B - see http://www.arm.com/ |
| * --------------------------------------------------------------------------- |
| */ |
| #ifndef ASM_ARM_HARDWARE_AMBA_KMI_H |
| #define ASM_ARM_HARDWARE_AMBA_KMI_H |
| |
| /* |
| * KMI control register: |
| * KMICR_TYPE 0 = PS2/AT mode, 1 = No line control bit mode |
| * KMICR_RXINTREN 1 = enable RX interrupts |
| * KMICR_TXINTREN 1 = enable TX interrupts |
| * KMICR_EN 1 = enable KMI |
| * KMICR_FD 1 = force KMI data low |
| * KMICR_FC 1 = force KMI clock low |
| */ |
| #define KMICR (KMI_BASE + 0x00) |
| #define KMICR_TYPE (1 << 5) |
| #define KMICR_RXINTREN (1 << 4) |
| #define KMICR_TXINTREN (1 << 3) |
| #define KMICR_EN (1 << 2) |
| #define KMICR_FD (1 << 1) |
| #define KMICR_FC (1 << 0) |
| |
| /* |
| * KMI status register: |
| * KMISTAT_TXEMPTY 1 = transmitter register empty |
| * KMISTAT_TXBUSY 1 = currently sending data |
| * KMISTAT_RXFULL 1 = receiver register ready to be read |
| * KMISTAT_RXBUSY 1 = currently receiving data |
| * KMISTAT_RXPARITY parity of last databyte received |
| * KMISTAT_IC current level of KMI clock input |
| * KMISTAT_ID current level of KMI data input |
| */ |
| #define KMISTAT (KMI_BASE + 0x04) |
| #define KMISTAT_TXEMPTY (1 << 6) |
| #define KMISTAT_TXBUSY (1 << 5) |
| #define KMISTAT_RXFULL (1 << 4) |
| #define KMISTAT_RXBUSY (1 << 3) |
| #define KMISTAT_RXPARITY (1 << 2) |
| #define KMISTAT_IC (1 << 1) |
| #define KMISTAT_ID (1 << 0) |
| |
| /* |
| * KMI data register |
| */ |
| #define KMIDATA (KMI_BASE + 0x08) |
| |
| /* |
| * KMI clock divisor: to generate 8MHz internal clock |
| * div = (ref / 8MHz) - 1; 0 <= div <= 15 |
| */ |
| #define KMICLKDIV (KMI_BASE + 0x0c) |
| |
| /* |
| * KMI interrupt register: |
| * KMIIR_TXINTR 1 = transmit interrupt asserted |
| * KMIIR_RXINTR 1 = receive interrupt asserted |
| */ |
| #define KMIIR (KMI_BASE + 0x10) |
| #define KMIIR_TXINTR (1 << 1) |
| #define KMIIR_RXINTR (1 << 0) |
| |
| /* |
| * The size of the KMI primecell |
| */ |
| #define KMI_SIZE (0x100) |
| |
| #endif |
