| /****************************************************************************** |
| * |
| * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * Modifications for inclusion into the Linux staging tree are |
| * Copyright(c) 2010 Larry Finger. All rights reserved. |
| * |
| * Contact information: |
| * WLAN FAE <wlanfae@realtek.com> |
| * Larry Finger <Larry.Finger@lwfinger.net> |
| * |
| ******************************************************************************/ |
| #define _RTL871X_MP_C_ |
| |
| #include "osdep_service.h" |
| #include "drv_types.h" |
| #include "rtl871x_mp_phy_regdef.h" |
| #include "rtl8712_cmd.h" |
| |
| static void _init_mp_priv_(struct mp_priv *pmp_priv) |
| { |
| pmp_priv->mode = _LOOPBOOK_MODE_; |
| pmp_priv->curr_ch = 1; |
| pmp_priv->curr_modem = MIXED_PHY; |
| pmp_priv->curr_rateidx = 0; |
| pmp_priv->curr_txpoweridx = 0x14; |
| pmp_priv->antenna_tx = ANTENNA_A; |
| pmp_priv->antenna_rx = ANTENNA_AB; |
| pmp_priv->check_mp_pkt = 0; |
| pmp_priv->tx_pktcount = 0; |
| pmp_priv->rx_pktcount = 0; |
| pmp_priv->rx_crcerrpktcount = 0; |
| } |
| |
| static int init_mp_priv(struct mp_priv *pmp_priv) |
| { |
| int i, res; |
| struct mp_xmit_frame *pmp_xmitframe; |
| |
| _init_mp_priv_(pmp_priv); |
| _init_queue(&pmp_priv->free_mp_xmitqueue); |
| pmp_priv->pallocated_mp_xmitframe_buf = NULL; |
| pmp_priv->pallocated_mp_xmitframe_buf = kmalloc(NR_MP_XMITFRAME * |
| sizeof(struct mp_xmit_frame) + 4, |
| GFP_ATOMIC); |
| if (!pmp_priv->pallocated_mp_xmitframe_buf) { |
| res = _FAIL; |
| goto _exit_init_mp_priv; |
| } |
| pmp_priv->pmp_xmtframe_buf = pmp_priv->pallocated_mp_xmitframe_buf + |
| 4 - |
| ((addr_t)(pmp_priv->pallocated_mp_xmitframe_buf) & 3); |
| pmp_xmitframe = (struct mp_xmit_frame *)pmp_priv->pmp_xmtframe_buf; |
| for (i = 0; i < NR_MP_XMITFRAME; i++) { |
| INIT_LIST_HEAD(&(pmp_xmitframe->list)); |
| list_add_tail(&(pmp_xmitframe->list), |
| &(pmp_priv->free_mp_xmitqueue.queue)); |
| pmp_xmitframe->pkt = NULL; |
| pmp_xmitframe->frame_tag = MP_FRAMETAG; |
| pmp_xmitframe->padapter = pmp_priv->papdater; |
| pmp_xmitframe++; |
| } |
| pmp_priv->free_mp_xmitframe_cnt = NR_MP_XMITFRAME; |
| res = _SUCCESS; |
| _exit_init_mp_priv: |
| return res; |
| } |
| |
| static int free_mp_priv(struct mp_priv *pmp_priv) |
| { |
| kfree(pmp_priv->pallocated_mp_xmitframe_buf); |
| return 0; |
| } |
| |
| void mp871xinit(struct _adapter *padapter) |
| { |
| struct mp_priv *pmppriv = &padapter->mppriv; |
| |
| pmppriv->papdater = padapter; |
| init_mp_priv(pmppriv); |
| } |
| |
| void mp871xdeinit(struct _adapter *padapter) |
| { |
| struct mp_priv *pmppriv = &padapter->mppriv; |
| |
| free_mp_priv(pmppriv); |
| } |
| |
| /* |
| * Special for bb and rf reg read/write |
| */ |
| static u32 fw_iocmd_read(struct _adapter *pAdapter, struct IOCMD_STRUCT iocmd) |
| { |
| u32 cmd32 = 0, val32 = 0; |
| u8 iocmd_class = iocmd.cmdclass; |
| u16 iocmd_value = iocmd.value; |
| u8 iocmd_idx = iocmd.index; |
| |
| cmd32 = (iocmd_class << 24) | (iocmd_value << 8) | iocmd_idx; |
| if (r8712_fw_cmd(pAdapter, cmd32)) |
| r8712_fw_cmd_data(pAdapter, &val32, 1); |
| else |
| val32 = 0; |
| return val32; |
| } |
| |
| static u8 fw_iocmd_write(struct _adapter *pAdapter, |
| struct IOCMD_STRUCT iocmd, u32 value) |
| { |
| u32 cmd32 = 0; |
| u8 iocmd_class = iocmd.cmdclass; |
| u32 iocmd_value = iocmd.value; |
| u8 iocmd_idx = iocmd.index; |
| |
| r8712_fw_cmd_data(pAdapter, &value, 0); |
| msleep(100); |
| cmd32 = (iocmd_class << 24) | (iocmd_value << 8) | iocmd_idx; |
| return r8712_fw_cmd(pAdapter, cmd32); |
| } |
| |
| /* offset : 0X800~0XFFF */ |
| u32 r8712_bb_reg_read(struct _adapter *pAdapter, u16 offset) |
| { |
| u8 shift = offset & 0x0003; /* 4 byte access */ |
| u16 bb_addr = offset & 0x0FFC; /* 4 byte access */ |
| u32 bb_val = 0; |
| struct IOCMD_STRUCT iocmd; |
| |
| iocmd.cmdclass = IOCMD_CLASS_BB_RF; |
| iocmd.value = bb_addr; |
| iocmd.index = IOCMD_BB_READ_IDX; |
| bb_val = fw_iocmd_read(pAdapter, iocmd); |
| if (shift != 0) { |
| u32 bb_val2 = 0; |
| |
| bb_val >>= (shift * 8); |
| iocmd.value += 4; |
| bb_val2 = fw_iocmd_read(pAdapter, iocmd); |
| bb_val2 <<= ((4 - shift) * 8); |
| bb_val |= bb_val2; |
| } |
| return bb_val; |
| } |
| |
| /* offset : 0X800~0XFFF */ |
| u8 r8712_bb_reg_write(struct _adapter *pAdapter, u16 offset, u32 value) |
| { |
| u8 shift = offset & 0x0003; /* 4 byte access */ |
| u16 bb_addr = offset & 0x0FFC; /* 4 byte access */ |
| struct IOCMD_STRUCT iocmd; |
| |
| iocmd.cmdclass = IOCMD_CLASS_BB_RF; |
| iocmd.value = bb_addr; |
| iocmd.index = IOCMD_BB_WRITE_IDX; |
| if (shift != 0) { |
| u32 oldValue = 0; |
| u32 newValue = value; |
| |
| oldValue = r8712_bb_reg_read(pAdapter, iocmd.value); |
| oldValue &= (0xFFFFFFFF >> ((4 - shift) * 8)); |
| value = oldValue | (newValue << (shift * 8)); |
| if (!fw_iocmd_write(pAdapter, iocmd, value)) |
| return false; |
| iocmd.value += 4; |
| oldValue = r8712_bb_reg_read(pAdapter, iocmd.value); |
| oldValue &= (0xFFFFFFFF << (shift * 8)); |
| value = oldValue | (newValue >> ((4 - shift) * 8)); |
| } |
| return fw_iocmd_write(pAdapter, iocmd, value); |
| } |
| |
| /* offset : 0x00 ~ 0xFF */ |
| u32 r8712_rf_reg_read(struct _adapter *pAdapter, u8 path, u8 offset) |
| { |
| u16 rf_addr = (path << 8) | offset; |
| struct IOCMD_STRUCT iocmd; |
| |
| iocmd.cmdclass = IOCMD_CLASS_BB_RF; |
| iocmd.value = rf_addr; |
| iocmd.index = IOCMD_RF_READ_IDX; |
| return fw_iocmd_read(pAdapter, iocmd); |
| } |
| |
| u8 r8712_rf_reg_write(struct _adapter *pAdapter, u8 path, u8 offset, u32 value) |
| { |
| u16 rf_addr = (path << 8) | offset; |
| struct IOCMD_STRUCT iocmd; |
| |
| iocmd.cmdclass = IOCMD_CLASS_BB_RF; |
| iocmd.value = rf_addr; |
| iocmd.index = IOCMD_RF_WRIT_IDX; |
| return fw_iocmd_write(pAdapter, iocmd, value); |
| } |
| |
| static u32 bitshift(u32 bitmask) |
| { |
| u32 i; |
| |
| for (i = 0; i <= 31; i++) |
| if (((bitmask >> i) & 0x1) == 1) |
| break; |
| return i; |
| } |
| |
| static u32 get_bb_reg(struct _adapter *pAdapter, u16 offset, u32 bitmask) |
| { |
| u32 org_value, bit_shift; |
| |
| org_value = r8712_bb_reg_read(pAdapter, offset); |
| bit_shift = bitshift(bitmask); |
| return (org_value & bitmask) >> bit_shift; |
| } |
| |
| static u8 set_bb_reg(struct _adapter *pAdapter, |
| u16 offset, |
| u32 bitmask, |
| u32 value) |
| { |
| u32 org_value, bit_shift, new_value; |
| |
| if (bitmask != bMaskDWord) { |
| org_value = r8712_bb_reg_read(pAdapter, offset); |
| bit_shift = bitshift(bitmask); |
| new_value = ((org_value & (~bitmask)) | (value << bit_shift)); |
| } else { |
| new_value = value; |
| } |
| return r8712_bb_reg_write(pAdapter, offset, new_value); |
| } |
| |
| static u32 get_rf_reg(struct _adapter *pAdapter, u8 path, u8 offset, |
| u32 bitmask) |
| { |
| u32 org_value, bit_shift; |
| |
| org_value = r8712_rf_reg_read(pAdapter, path, offset); |
| bit_shift = bitshift(bitmask); |
| return (org_value & bitmask) >> bit_shift; |
| } |
| |
| static u8 set_rf_reg(struct _adapter *pAdapter, u8 path, u8 offset, u32 bitmask, |
| u32 value) |
| { |
| u32 org_value, bit_shift, new_value; |
| |
| if (bitmask != bMaskDWord) { |
| org_value = r8712_rf_reg_read(pAdapter, path, offset); |
| bit_shift = bitshift(bitmask); |
| new_value = ((org_value & (~bitmask)) | (value << bit_shift)); |
| } else { |
| new_value = value; |
| } |
| return r8712_rf_reg_write(pAdapter, path, offset, new_value); |
| } |
| |
| /* |
| * SetChannel |
| * Description |
| * Use H2C command to change channel, |
| * not only modify rf register, but also other setting need to be done. |
| */ |
| void r8712_SetChannel(struct _adapter *pAdapter) |
| { |
| struct cmd_priv *pcmdpriv = &pAdapter->cmdpriv; |
| struct cmd_obj *pcmd = NULL; |
| struct SetChannel_parm *pparm = NULL; |
| u16 code = GEN_CMD_CODE(_SetChannel); |
| |
| pcmd = kmalloc(sizeof(*pcmd), GFP_ATOMIC); |
| if (pcmd == NULL) |
| return; |
| pparm = kmalloc(sizeof(*pparm), GFP_ATOMIC); |
| if (pparm == NULL) { |
| kfree(pcmd); |
| return; |
| } |
| pparm->curr_ch = pAdapter->mppriv.curr_ch; |
| init_h2fwcmd_w_parm_no_rsp(pcmd, pparm, code); |
| r8712_enqueue_cmd(pcmdpriv, pcmd); |
| } |
| |
| static void SetCCKTxPower(struct _adapter *pAdapter, u8 TxPower) |
| { |
| u16 TxAGC = 0; |
| |
| TxAGC = TxPower; |
| set_bb_reg(pAdapter, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC); |
| } |
| |
| static void SetOFDMTxPower(struct _adapter *pAdapter, u8 TxPower) |
| { |
| u32 TxAGC = 0; |
| |
| TxAGC |= ((TxPower << 24) | (TxPower << 16) | (TxPower << 8) | |
| TxPower); |
| set_bb_reg(pAdapter, rTxAGC_Rate18_06, bTxAGCRate18_06, TxAGC); |
| set_bb_reg(pAdapter, rTxAGC_Rate54_24, bTxAGCRate54_24, TxAGC); |
| set_bb_reg(pAdapter, rTxAGC_Mcs03_Mcs00, bTxAGCRateMCS3_MCS0, TxAGC); |
| set_bb_reg(pAdapter, rTxAGC_Mcs07_Mcs04, bTxAGCRateMCS7_MCS4, TxAGC); |
| set_bb_reg(pAdapter, rTxAGC_Mcs11_Mcs08, bTxAGCRateMCS11_MCS8, TxAGC); |
| set_bb_reg(pAdapter, rTxAGC_Mcs15_Mcs12, bTxAGCRateMCS15_MCS12, TxAGC); |
| } |
| |
| void r8712_SetTxPower(struct _adapter *pAdapter) |
| { |
| u8 TxPower = pAdapter->mppriv.curr_txpoweridx; |
| |
| SetCCKTxPower(pAdapter, TxPower); |
| SetOFDMTxPower(pAdapter, TxPower); |
| } |
| |
| void r8712_SetTxAGCOffset(struct _adapter *pAdapter, u32 ulTxAGCOffset) |
| { |
| u32 TxAGCOffset_B, TxAGCOffset_C, TxAGCOffset_D, tmpAGC; |
| |
| TxAGCOffset_B = (ulTxAGCOffset & 0x000000ff); |
| TxAGCOffset_C = (ulTxAGCOffset & 0x0000ff00) >> 8; |
| TxAGCOffset_D = (ulTxAGCOffset & 0x00ff0000) >> 16; |
| tmpAGC = (TxAGCOffset_D << 8 | TxAGCOffset_C << 4 | TxAGCOffset_B); |
| set_bb_reg(pAdapter, rFPGA0_TxGainStage, |
| (bXBTxAGC | bXCTxAGC | bXDTxAGC), tmpAGC); |
| } |
| |
| void r8712_SetDataRate(struct _adapter *pAdapter) |
| { |
| u8 path = RF_PATH_A; |
| u8 offset = RF_SYN_G2; |
| u32 value; |
| |
| value = (pAdapter->mppriv.curr_rateidx < 4) ? 0x4440 : 0xF200; |
| r8712_rf_reg_write(pAdapter, path, offset, value); |
| } |
| |
| void r8712_SwitchBandwidth(struct _adapter *pAdapter) |
| { |
| /* 3 1.Set MAC register : BWOPMODE bit2:1 20MhzBW */ |
| u8 regBwOpMode = 0; |
| u8 Bandwidth = pAdapter->mppriv.curr_bandwidth; |
| |
| regBwOpMode = r8712_read8(pAdapter, 0x10250203); |
| if (Bandwidth == HT_CHANNEL_WIDTH_20) |
| regBwOpMode |= BIT(2); |
| else |
| regBwOpMode &= ~(BIT(2)); |
| r8712_write8(pAdapter, 0x10250203, regBwOpMode); |
| /* 3 2.Set PHY related register */ |
| switch (Bandwidth) { |
| /* 20 MHz channel*/ |
| case HT_CHANNEL_WIDTH_20: |
| set_bb_reg(pAdapter, rFPGA0_RFMOD, bRFMOD, 0x0); |
| set_bb_reg(pAdapter, rFPGA1_RFMOD, bRFMOD, 0x0); |
| /* Use PHY_REG.txt default value. Do not need to change. |
| * Correct the tx power for CCK rate in 40M. |
| * It is set in Tx descriptor for 8192x series |
| */ |
| set_bb_reg(pAdapter, rFPGA0_AnalogParameter2, bMaskDWord, 0x58); |
| break; |
| /* 40 MHz channel*/ |
| case HT_CHANNEL_WIDTH_40: |
| set_bb_reg(pAdapter, rFPGA0_RFMOD, bRFMOD, 0x1); |
| set_bb_reg(pAdapter, rFPGA1_RFMOD, bRFMOD, 0x1); |
| /* Use PHY_REG.txt default value. Do not need to change. |
| * Correct the tx power for CCK rate in 40M. |
| * Set Control channel to upper or lower. These settings are |
| * required only for 40MHz */ |
| set_bb_reg(pAdapter, rCCK0_System, bCCKSideBand, |
| (HAL_PRIME_CHNL_OFFSET_DONT_CARE >> 1)); |
| set_bb_reg(pAdapter, rOFDM1_LSTF, 0xC00, |
| HAL_PRIME_CHNL_OFFSET_DONT_CARE); |
| set_bb_reg(pAdapter, rFPGA0_AnalogParameter2, bMaskDWord, 0x18); |
| break; |
| default: |
| break; |
| } |
| |
| /* 3 3.Set RF related register */ |
| switch (Bandwidth) { |
| case HT_CHANNEL_WIDTH_20: |
| set_rf_reg(pAdapter, RF_PATH_A, RF_CHNLBW, |
| BIT(10) | BIT(11), 0x01); |
| break; |
| case HT_CHANNEL_WIDTH_40: |
| set_rf_reg(pAdapter, RF_PATH_A, RF_CHNLBW, |
| BIT(10) | BIT(11), 0x00); |
| break; |
| default: |
| break; |
| } |
| } |
| /*------------------------------Define structure----------------------------*/ |
| struct R_ANTENNA_SELECT_OFDM { |
| u32 r_tx_antenna:4; |
| u32 r_ant_l:4; |
| u32 r_ant_non_ht:4; |
| u32 r_ant_ht1:4; |
| u32 r_ant_ht2:4; |
| u32 r_ant_ht_s1:4; |
| u32 r_ant_non_ht_s1:4; |
| u32 OFDM_TXSC:2; |
| u32 Reserved:2; |
| }; |
| |
| struct R_ANTENNA_SELECT_CCK { |
| u8 r_cckrx_enable_2:2; |
| u8 r_cckrx_enable:2; |
| u8 r_ccktx_enable:4; |
| }; |
| |
| void r8712_SwitchAntenna(struct _adapter *pAdapter) |
| { |
| u32 ofdm_tx_en_val = 0, ofdm_tx_ant_sel_val = 0; |
| u8 ofdm_rx_ant_sel_val = 0; |
| u8 cck_ant_select_val = 0; |
| u32 cck_ant_sel_val = 0; |
| struct R_ANTENNA_SELECT_CCK *p_cck_txrx; |
| |
| p_cck_txrx = (struct R_ANTENNA_SELECT_CCK *)&cck_ant_select_val; |
| |
| switch (pAdapter->mppriv.antenna_tx) { |
| case ANTENNA_A: |
| /* From SD3 Willis suggestion !!! Set RF A=TX and B as standby*/ |
| set_bb_reg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2); |
| set_bb_reg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 1); |
| ofdm_tx_en_val = 0x3; |
| ofdm_tx_ant_sel_val = 0x11111111;/* Power save */ |
| p_cck_txrx->r_ccktx_enable = 0x8; |
| break; |
| case ANTENNA_B: |
| set_bb_reg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 1); |
| set_bb_reg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2); |
| ofdm_tx_en_val = 0x3; |
| ofdm_tx_ant_sel_val = 0x22222222;/* Power save */ |
| p_cck_txrx->r_ccktx_enable = 0x4; |
| break; |
| case ANTENNA_AB: /* For 8192S */ |
| set_bb_reg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2); |
| set_bb_reg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2); |
| ofdm_tx_en_val = 0x3; |
| ofdm_tx_ant_sel_val = 0x3321333; /* Disable Power save */ |
| p_cck_txrx->r_ccktx_enable = 0xC; |
| break; |
| default: |
| break; |
| } |
| /*OFDM Tx*/ |
| set_bb_reg(pAdapter, rFPGA1_TxInfo, 0xffffffff, ofdm_tx_ant_sel_val); |
| /*OFDM Tx*/ |
| set_bb_reg(pAdapter, rFPGA0_TxInfo, 0x0000000f, ofdm_tx_en_val); |
| switch (pAdapter->mppriv.antenna_rx) { |
| case ANTENNA_A: |
| ofdm_rx_ant_sel_val = 0x1; /* A */ |
| p_cck_txrx->r_cckrx_enable = 0x0; /* default: A */ |
| p_cck_txrx->r_cckrx_enable_2 = 0x0; /* option: A */ |
| break; |
| case ANTENNA_B: |
| ofdm_rx_ant_sel_val = 0x2; /* B */ |
| p_cck_txrx->r_cckrx_enable = 0x1; /* default: B */ |
| p_cck_txrx->r_cckrx_enable_2 = 0x1; /* option: B */ |
| break; |
| case ANTENNA_AB: |
| ofdm_rx_ant_sel_val = 0x3; /* AB */ |
| p_cck_txrx->r_cckrx_enable = 0x0; /* default:A */ |
| p_cck_txrx->r_cckrx_enable_2 = 0x1; /* option:B */ |
| break; |
| default: |
| break; |
| } |
| /*OFDM Rx*/ |
| set_bb_reg(pAdapter, rOFDM0_TRxPathEnable, 0x0000000f, |
| ofdm_rx_ant_sel_val); |
| /*OFDM Rx*/ |
| set_bb_reg(pAdapter, rOFDM1_TRxPathEnable, 0x0000000f, |
| ofdm_rx_ant_sel_val); |
| |
| cck_ant_sel_val = cck_ant_select_val; |
| /*CCK TxRx*/ |
| set_bb_reg(pAdapter, rCCK0_AFESetting, bMaskByte3, cck_ant_sel_val); |
| } |
| |
| static void TriggerRFThermalMeter(struct _adapter *pAdapter) |
| { |
| /* 0x24: RF Reg[6:5] */ |
| set_rf_reg(pAdapter, RF_PATH_A, RF_T_METER, bRFRegOffsetMask, 0x60); |
| } |
| |
| static u32 ReadRFThermalMeter(struct _adapter *pAdapter) |
| { |
| /* 0x24: RF Reg[4:0] */ |
| return get_rf_reg(pAdapter, RF_PATH_A, RF_T_METER, 0x1F); |
| } |
| |
| void r8712_GetThermalMeter(struct _adapter *pAdapter, u32 *value) |
| { |
| TriggerRFThermalMeter(pAdapter); |
| msleep(1000); |
| *value = ReadRFThermalMeter(pAdapter); |
| } |
| |
| void r8712_SetSingleCarrierTx(struct _adapter *pAdapter, u8 bStart) |
| { |
| if (bStart) { /* Start Single Carrier. */ |
| /* 1. if OFDM block on? */ |
| if (!get_bb_reg(pAdapter, rFPGA0_RFMOD, bOFDMEn)) |
| /*set OFDM block on*/ |
| set_bb_reg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable); |
| /* 2. set CCK test mode off, set to CCK normal mode */ |
| set_bb_reg(pAdapter, rCCK0_System, bCCKBBMode, bDisable); |
| /* 3. turn on scramble setting */ |
| set_bb_reg(pAdapter, rCCK0_System, bCCKScramble, bEnable); |
| /* 4. Turn On Single Carrier Tx and off the other test modes. */ |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bEnable); |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); |
| } else { /* Stop Single Carrier.*/ |
| /* Turn off all test modes.*/ |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, |
| bDisable); |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); |
| msleep(20); |
| /*BB Reset*/ |
| set_bb_reg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); |
| set_bb_reg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); |
| } |
| } |
| |
| void r8712_SetSingleToneTx(struct _adapter *pAdapter, u8 bStart) |
| { |
| u8 rfPath = pAdapter->mppriv.curr_rfpath; |
| |
| switch (pAdapter->mppriv.antenna_tx) { |
| case ANTENNA_B: |
| rfPath = RF_PATH_B; |
| break; |
| case ANTENNA_A: |
| default: |
| rfPath = RF_PATH_A; |
| break; |
| } |
| if (bStart) { /* Start Single Tone.*/ |
| set_bb_reg(pAdapter, rFPGA0_RFMOD, bCCKEn, bDisable); |
| set_bb_reg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bDisable); |
| set_rf_reg(pAdapter, rfPath, RF_TX_G2, bRFRegOffsetMask, |
| 0xd4000); |
| msleep(100); |
| /* PAD all on.*/ |
| set_rf_reg(pAdapter, rfPath, RF_AC, bRFRegOffsetMask, 0x2001f); |
| msleep(100); |
| } else { /* Stop Single Tone.*/ |
| set_bb_reg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable); |
| set_bb_reg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable); |
| set_rf_reg(pAdapter, rfPath, RF_TX_G2, bRFRegOffsetMask, |
| 0x54000); |
| msleep(100); |
| /* PAD all on.*/ |
| set_rf_reg(pAdapter, rfPath, RF_AC, bRFRegOffsetMask, 0x30000); |
| msleep(100); |
| } |
| } |
| |
| void r8712_SetCarrierSuppressionTx(struct _adapter *pAdapter, u8 bStart) |
| { |
| if (bStart) { /* Start Carrier Suppression.*/ |
| if (pAdapter->mppriv.curr_rateidx <= MPT_RATE_11M) { |
| /* 1. if CCK block on? */ |
| if (!get_bb_reg(pAdapter, rFPGA0_RFMOD, bCCKEn)) { |
| /*set CCK block on*/ |
| set_bb_reg(pAdapter, rFPGA0_RFMOD, bCCKEn, |
| bEnable); |
| } |
| /* Turn Off All Test Mode */ |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, |
| bDisable); |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, |
| bDisable); |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, |
| bDisable); |
| /*transmit mode*/ |
| set_bb_reg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); |
| /*turn off scramble setting*/ |
| set_bb_reg(pAdapter, rCCK0_System, bCCKScramble, |
| bDisable); |
| /*Set CCK Tx Test Rate*/ |
| /*Set FTxRate to 1Mbps*/ |
| set_bb_reg(pAdapter, rCCK0_System, bCCKTxRate, 0x0); |
| } |
| } else { /* Stop Carrier Suppression. */ |
| if (pAdapter->mppriv.curr_rateidx <= MPT_RATE_11M) { |
| /*normal mode*/ |
| set_bb_reg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); |
| /*turn on scramble setting*/ |
| set_bb_reg(pAdapter, rCCK0_System, bCCKScramble, |
| bEnable); |
| /*BB Reset*/ |
| set_bb_reg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); |
| set_bb_reg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); |
| } |
| } |
| } |
| |
| static void SetCCKContinuousTx(struct _adapter *pAdapter, u8 bStart) |
| { |
| u32 cckrate; |
| |
| if (bStart) { |
| /* 1. if CCK block on? */ |
| if (!get_bb_reg(pAdapter, rFPGA0_RFMOD, bCCKEn)) { |
| /*set CCK block on*/ |
| set_bb_reg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable); |
| } |
| /* Turn Off All Test Mode */ |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); |
| /*Set CCK Tx Test Rate*/ |
| cckrate = pAdapter->mppriv.curr_rateidx; |
| set_bb_reg(pAdapter, rCCK0_System, bCCKTxRate, cckrate); |
| /*transmit mode*/ |
| set_bb_reg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); |
| /*turn on scramble setting*/ |
| set_bb_reg(pAdapter, rCCK0_System, bCCKScramble, bEnable); |
| } else { |
| /*normal mode*/ |
| set_bb_reg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); |
| /*turn on scramble setting*/ |
| set_bb_reg(pAdapter, rCCK0_System, bCCKScramble, bEnable); |
| /*BB Reset*/ |
| set_bb_reg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); |
| set_bb_reg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); |
| } |
| } /* mpt_StartCckContTx */ |
| |
| static void SetOFDMContinuousTx(struct _adapter *pAdapter, u8 bStart) |
| { |
| if (bStart) { |
| /* 1. if OFDM block on? */ |
| if (!get_bb_reg(pAdapter, rFPGA0_RFMOD, bOFDMEn)) { |
| /*set OFDM block on*/ |
| set_bb_reg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable); |
| } |
| /* 2. set CCK test mode off, set to CCK normal mode*/ |
| set_bb_reg(pAdapter, rCCK0_System, bCCKBBMode, bDisable); |
| /* 3. turn on scramble setting */ |
| set_bb_reg(pAdapter, rCCK0_System, bCCKScramble, bEnable); |
| /* 4. Turn On Continue Tx and turn off the other test modes.*/ |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bEnable); |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); |
| } else { |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, |
| bDisable); |
| set_bb_reg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); |
| msleep(20); |
| /*BB Reset*/ |
| set_bb_reg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); |
| set_bb_reg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); |
| } |
| } /* mpt_StartOfdmContTx */ |
| |
| void r8712_SetContinuousTx(struct _adapter *pAdapter, u8 bStart) |
| { |
| /* ADC turn off [bit24-21] adc port0 ~ port1 */ |
| if (bStart) { |
| r8712_bb_reg_write(pAdapter, rRx_Wait_CCCA, |
| r8712_bb_reg_read(pAdapter, |
| rRx_Wait_CCCA) & 0xFE1FFFFF); |
| msleep(100); |
| } |
| if (pAdapter->mppriv.curr_rateidx <= MPT_RATE_11M) |
| SetCCKContinuousTx(pAdapter, bStart); |
| else if ((pAdapter->mppriv.curr_rateidx >= MPT_RATE_6M) && |
| (pAdapter->mppriv.curr_rateidx <= MPT_RATE_MCS15)) |
| SetOFDMContinuousTx(pAdapter, bStart); |
| /* ADC turn on [bit24-21] adc port0 ~ port1 */ |
| if (!bStart) |
| r8712_bb_reg_write(pAdapter, rRx_Wait_CCCA, |
| r8712_bb_reg_read(pAdapter, |
| rRx_Wait_CCCA) | 0x01E00000); |
| } |
| |
| void r8712_ResetPhyRxPktCount(struct _adapter *pAdapter) |
| { |
| u32 i, phyrx_set = 0; |
| |
| for (i = OFDM_PPDU_BIT; i <= HT_MPDU_FAIL_BIT; i++) { |
| phyrx_set = 0; |
| phyrx_set |= (i << 28); /*select*/ |
| phyrx_set |= 0x08000000; /* set counter to zero*/ |
| r8712_write32(pAdapter, RXERR_RPT, phyrx_set); |
| } |
| } |
| |
| static u32 GetPhyRxPktCounts(struct _adapter *pAdapter, u32 selbit) |
| { |
| /*selection*/ |
| u32 phyrx_set = 0, count = 0; |
| u32 SelectBit; |
| |
| SelectBit = selbit << 28; |
| phyrx_set |= (SelectBit & 0xF0000000); |
| r8712_write32(pAdapter, RXERR_RPT, phyrx_set); |
| /*Read packet count*/ |
| count = r8712_read32(pAdapter, RXERR_RPT) & RPTMaxCount; |
| return count; |
| } |
| |
| u32 r8712_GetPhyRxPktReceived(struct _adapter *pAdapter) |
| { |
| u32 OFDM_cnt = 0, CCK_cnt = 0, HT_cnt = 0; |
| |
| OFDM_cnt = GetPhyRxPktCounts(pAdapter, OFDM_MPDU_OK_BIT); |
| CCK_cnt = GetPhyRxPktCounts(pAdapter, CCK_MPDU_OK_BIT); |
| HT_cnt = GetPhyRxPktCounts(pAdapter, HT_MPDU_OK_BIT); |
| return OFDM_cnt + CCK_cnt + HT_cnt; |
| } |
| |
| u32 r8712_GetPhyRxPktCRC32Error(struct _adapter *pAdapter) |
| { |
| u32 OFDM_cnt = 0, CCK_cnt = 0, HT_cnt = 0; |
| |
| OFDM_cnt = GetPhyRxPktCounts(pAdapter, OFDM_MPDU_FAIL_BIT); |
| CCK_cnt = GetPhyRxPktCounts(pAdapter, CCK_MPDU_FAIL_BIT); |
| HT_cnt = GetPhyRxPktCounts(pAdapter, HT_MPDU_FAIL_BIT); |
| return OFDM_cnt + CCK_cnt + HT_cnt; |
| } |