| /* |
| This is part of the rtl8192 driver |
| released under the GPL (See file COPYING for details). |
| |
| This files contains programming code for the rtl8256 |
| radio frontend. |
| |
| *Many* thanks to Realtek Corp. for their great support! |
| |
| */ |
| |
| #include "r8192U.h" |
| #include "r8192U_hw.h" |
| #include "r819xU_phyreg.h" |
| #include "r819xU_phy.h" |
| #include "r8190_rtl8256.h" |
| |
| /*-------------------------------------------------------------------------- |
| * Overview: set RF band width (20M or 40M) |
| * Input: struct net_device* dev |
| * WIRELESS_BANDWIDTH_E Bandwidth //20M or 40M |
| * Output: NONE |
| * Return: NONE |
| * Note: 8226 support both 20M and 40 MHz |
| *---------------------------------------------------------------------------*/ |
| void PHY_SetRF8256Bandwidth(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth) |
| { |
| u8 eRFPath; |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| |
| /* for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; |
| * eRFPath++) |
| */ |
| for (eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++) { |
| if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) |
| continue; |
| |
| switch (Bandwidth) { |
| case HT_CHANNEL_WIDTH_20: |
| if (priv->card_8192_version == VERSION_819xU_A |
| || priv->card_8192_version |
| == VERSION_819xU_B) { /* 8256 D-cut, E-cut, xiong: consider it later! */ |
| rtl8192_phy_SetRFReg(dev, |
| (RF90_RADIO_PATH_E)eRFPath, |
| 0x0b, bMask12Bits, 0x100); /* phy para:1ba */ |
| rtl8192_phy_SetRFReg(dev, |
| (RF90_RADIO_PATH_E)eRFPath, |
| 0x2c, bMask12Bits, 0x3d7); |
| rtl8192_phy_SetRFReg(dev, |
| (RF90_RADIO_PATH_E)eRFPath, |
| 0x0e, bMask12Bits, 0x021); |
| rtl8192_phy_SetRFReg(dev, |
| (RF90_RADIO_PATH_E)eRFPath, |
| 0x14, bMask12Bits, 0x5ab); |
| } else { |
| RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n"); |
| } |
| break; |
| case HT_CHANNEL_WIDTH_20_40: |
| if (priv->card_8192_version == VERSION_819xU_A || priv->card_8192_version == VERSION_819xU_B) { /* 8256 D-cut, E-cut, xiong: consider it later! */ |
| rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); /* phy para:3ba */ |
| rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3df); |
| rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0a1); |
| |
| if (priv->chan == 3 || priv->chan == 9) |
| /* I need to set priv->chan whenever current channel changes */ |
| rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x59b); |
| else |
| rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab); |
| } else { |
| RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n"); |
| } |
| break; |
| default: |
| RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown Bandwidth: %#X\n", Bandwidth); |
| break; |
| |
| } |
| } |
| } |
| /*-------------------------------------------------------------------------- |
| * Overview: Interface to config 8256 |
| * Input: struct net_device* dev |
| * Output: NONE |
| * Return: NONE |
| *---------------------------------------------------------------------------*/ |
| void PHY_RF8256_Config(struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| /* Initialize general global value |
| * |
| * TODO: Extend RF_PATH_C and RF_PATH_D in the future |
| */ |
| priv->NumTotalRFPath = RTL819X_TOTAL_RF_PATH; |
| /* Config BB and RF */ |
| phy_RF8256_Config_ParaFile(dev); |
| } |
| /*-------------------------------------------------------------------------- |
| * Overview: Interface to config 8256 |
| * Input: struct net_device* dev |
| * Output: NONE |
| * Return: NONE |
| *---------------------------------------------------------------------------*/ |
| void phy_RF8256_Config_ParaFile(struct net_device *dev) |
| { |
| u32 u4RegValue = 0; |
| u8 eRFPath; |
| BB_REGISTER_DEFINITION_T *pPhyReg; |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| u32 RegOffSetToBeCheck = 0x3; |
| u32 RegValueToBeCheck = 0x7f1; |
| u32 RF3_Final_Value = 0; |
| u8 ConstRetryTimes = 5, RetryTimes = 5; |
| u8 ret = 0; |
| /* Initialize RF */ |
| for (eRFPath = (RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath < priv->NumTotalRFPath; eRFPath++) { |
| if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) |
| continue; |
| |
| pPhyReg = &priv->PHYRegDef[eRFPath]; |
| |
| /* Joseph test for shorten RF config |
| * pHalData->RfReg0Value[eRFPath] = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, rGlobalCtrl, bMaskDWord); |
| * ----Store original RFENV control type |
| */ |
| switch (eRFPath) { |
| case RF90_PATH_A: |
| case RF90_PATH_C: |
| u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV); |
| break; |
| case RF90_PATH_B: |
| case RF90_PATH_D: |
| u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16); |
| break; |
| } |
| |
| /*----Set RF_ENV enable----*/ |
| rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1); |
| |
| /*----Set RF_ENV output high----*/ |
| rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1); |
| |
| /* Set bit number of Address and Data for RF register */ |
| rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); /* Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258 */ |
| rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); /* Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ??? */ |
| |
| rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf); |
| |
| /* Check RF block (for FPGA platform only)---- |
| * TODO: this function should be removed on ASIC , Emily 2007.2.2 |
| */ |
| if (rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (RF90_RADIO_PATH_E)eRFPath)) { |
| RT_TRACE(COMP_ERR, "PHY_RF8256_Config():Check Radio[%d] Fail!!\n", eRFPath); |
| goto phy_RF8256_Config_ParaFile_Fail; |
| } |
| |
| RetryTimes = ConstRetryTimes; |
| RF3_Final_Value = 0; |
| /*----Initialize RF fom connfiguration file----*/ |
| switch (eRFPath) { |
| case RF90_PATH_A: |
| while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) { |
| ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath); |
| RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); |
| RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value); |
| RetryTimes--; |
| } |
| break; |
| case RF90_PATH_B: |
| while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) { |
| ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath); |
| RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); |
| RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value); |
| RetryTimes--; |
| } |
| break; |
| case RF90_PATH_C: |
| while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) { |
| ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath); |
| RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); |
| RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value); |
| RetryTimes--; |
| } |
| break; |
| case RF90_PATH_D: |
| while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) { |
| ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath); |
| RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits); |
| RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value); |
| RetryTimes--; |
| } |
| break; |
| } |
| |
| /*----Restore RFENV control type----*/; |
| switch (eRFPath) { |
| case RF90_PATH_A: |
| case RF90_PATH_C: |
| rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue); |
| break; |
| case RF90_PATH_B: |
| case RF90_PATH_D: |
| rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue); |
| break; |
| } |
| |
| if (ret) { |
| RT_TRACE(COMP_ERR, "phy_RF8256_Config_ParaFile():Radio[%d] Fail!!", eRFPath); |
| goto phy_RF8256_Config_ParaFile_Fail; |
| } |
| |
| } |
| |
| RT_TRACE(COMP_PHY, "PHY Initialization Success\n"); |
| return; |
| |
| phy_RF8256_Config_ParaFile_Fail: |
| RT_TRACE(COMP_ERR, "PHY Initialization failed\n"); |
| } |
| |
| |
| void PHY_SetRF8256CCKTxPower(struct net_device *dev, u8 powerlevel) |
| { |
| u32 TxAGC = 0; |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| TxAGC = powerlevel; |
| |
| if (priv->bDynamicTxLowPower) { |
| if (priv->CustomerID == RT_CID_819x_Netcore) |
| TxAGC = 0x22; |
| else |
| TxAGC += priv->CckPwEnl; |
| } |
| |
| if (TxAGC > 0x24) |
| TxAGC = 0x24; |
| rtl8192_setBBreg(dev, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC); |
| } |
| |
| |
| void PHY_SetRF8256OFDMTxPower(struct net_device *dev, u8 powerlevel) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| /* Joseph TxPower for 8192 testing */ |
| u32 writeVal, powerBase0, powerBase1, writeVal_tmp; |
| u8 index = 0; |
| u16 RegOffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c}; |
| u8 byte0, byte1, byte2, byte3; |
| |
| powerBase0 = powerlevel + priv->TxPowerDiff; /* OFDM rates */ |
| powerBase0 = (powerBase0<<24) | (powerBase0<<16) | (powerBase0<<8) | powerBase0; |
| powerBase1 = powerlevel; /* MCS rates */ |
| powerBase1 = (powerBase1<<24) | (powerBase1<<16) | (powerBase1<<8) | powerBase1; |
| |
| for (index = 0; index < 6; index++) { |
| writeVal = priv->MCSTxPowerLevelOriginalOffset[index] + ((index < 2)?powerBase0:powerBase1); |
| byte0 = (u8)(writeVal & 0x7f); |
| byte1 = (u8)((writeVal & 0x7f00)>>8); |
| byte2 = (u8)((writeVal & 0x7f0000)>>16); |
| byte3 = (u8)((writeVal & 0x7f000000)>>24); |
| |
| if (byte0 > 0x24) |
| /* Max power index = 0x24 */ |
| byte0 = 0x24; |
| if (byte1 > 0x24) |
| byte1 = 0x24; |
| if (byte2 > 0x24) |
| byte2 = 0x24; |
| if (byte3 > 0x24) |
| byte3 = 0x24; |
| |
| /* for tx power track */ |
| if (index == 3) { |
| writeVal_tmp = (byte3<<24) | (byte2<<16) | (byte1<<8) | byte0; |
| priv->Pwr_Track = writeVal_tmp; |
| } |
| |
| if (priv->bDynamicTxHighPower) { |
| /*Add by Jacken 2008/03/06 |
| *Emily, 20080613. Set low tx power for both MCS and legacy OFDM |
| */ |
| writeVal = 0x03030303; |
| } else { |
| writeVal = (byte3<<24) | (byte2<<16) | (byte1<<8) | byte0; |
| } |
| rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal); |
| } |
| return; |
| |
| } |