| /* |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2015 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2015 Intel Corporation. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * - Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * - Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * - Neither the name of Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/vmalloc.h> |
| |
| #include "hfi.h" |
| #include "twsi.h" |
| |
| /* |
| * QSFP support for hfi driver, using "Two Wire Serial Interface" driver |
| * in twsi.c |
| */ |
| #define I2C_MAX_RETRY 4 |
| |
| /* |
| * Unlocked i2c write. Must hold dd->qsfp_i2c_mutex. |
| */ |
| static int __i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, |
| int offset, void *bp, int len) |
| { |
| struct hfi1_devdata *dd = ppd->dd; |
| int ret, cnt; |
| u8 *buff = bp; |
| |
| /* Make sure TWSI bus is in sane state. */ |
| ret = hfi1_twsi_reset(dd, target); |
| if (ret) { |
| hfi1_dev_porterr(dd, ppd->port, |
| "I2C interface Reset for write failed\n"); |
| return -EIO; |
| } |
| |
| cnt = 0; |
| while (cnt < len) { |
| int wlen = len - cnt; |
| |
| ret = hfi1_twsi_blk_wr(dd, target, i2c_addr, offset, |
| buff + cnt, wlen); |
| if (ret) { |
| /* hfi1_twsi_blk_wr() 1 for error, else 0 */ |
| return -EIO; |
| } |
| offset += wlen; |
| cnt += wlen; |
| } |
| |
| /* Must wait min 20us between qsfp i2c transactions */ |
| udelay(20); |
| |
| return cnt; |
| } |
| |
| int i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, int offset, |
| void *bp, int len) |
| { |
| struct hfi1_devdata *dd = ppd->dd; |
| int ret; |
| |
| ret = mutex_lock_interruptible(&dd->qsfp_i2c_mutex); |
| if (!ret) { |
| ret = __i2c_write(ppd, target, i2c_addr, offset, bp, len); |
| mutex_unlock(&dd->qsfp_i2c_mutex); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Unlocked i2c read. Must hold dd->qsfp_i2c_mutex. |
| */ |
| static int __i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, |
| int offset, void *bp, int len) |
| { |
| struct hfi1_devdata *dd = ppd->dd; |
| int ret, cnt, pass = 0; |
| int stuck = 0; |
| u8 *buff = bp; |
| |
| /* Make sure TWSI bus is in sane state. */ |
| ret = hfi1_twsi_reset(dd, target); |
| if (ret) { |
| hfi1_dev_porterr(dd, ppd->port, |
| "I2C interface Reset for read failed\n"); |
| ret = -EIO; |
| stuck = 1; |
| goto exit; |
| } |
| |
| cnt = 0; |
| while (cnt < len) { |
| int rlen = len - cnt; |
| |
| ret = hfi1_twsi_blk_rd(dd, target, i2c_addr, offset, |
| buff + cnt, rlen); |
| /* Some QSFP's fail first try. Retry as experiment */ |
| if (ret && cnt == 0 && ++pass < I2C_MAX_RETRY) |
| continue; |
| if (ret) { |
| /* hfi1_twsi_blk_rd() 1 for error, else 0 */ |
| ret = -EIO; |
| goto exit; |
| } |
| offset += rlen; |
| cnt += rlen; |
| } |
| |
| ret = cnt; |
| |
| exit: |
| if (stuck) |
| dd_dev_err(dd, "I2C interface bus stuck non-idle\n"); |
| |
| if (pass >= I2C_MAX_RETRY && ret) |
| hfi1_dev_porterr(dd, ppd->port, |
| "I2C failed even retrying\n"); |
| else if (pass) |
| hfi1_dev_porterr(dd, ppd->port, "I2C retries: %d\n", pass); |
| |
| /* Must wait min 20us between qsfp i2c transactions */ |
| udelay(20); |
| |
| return ret; |
| } |
| |
| int i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, int offset, |
| void *bp, int len) |
| { |
| struct hfi1_devdata *dd = ppd->dd; |
| int ret; |
| |
| ret = mutex_lock_interruptible(&dd->qsfp_i2c_mutex); |
| if (!ret) { |
| ret = __i2c_read(ppd, target, i2c_addr, offset, bp, len); |
| mutex_unlock(&dd->qsfp_i2c_mutex); |
| } |
| |
| return ret; |
| } |
| |
| int qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp, |
| int len) |
| { |
| int count = 0; |
| int offset; |
| int nwrite; |
| int ret; |
| u8 page; |
| |
| ret = mutex_lock_interruptible(&ppd->dd->qsfp_i2c_mutex); |
| if (ret) |
| return ret; |
| |
| while (count < len) { |
| /* |
| * Set the qsfp page based on a zero-based addresss |
| * and a page size of QSFP_PAGESIZE bytes. |
| */ |
| page = (u8)(addr / QSFP_PAGESIZE); |
| |
| ret = __i2c_write(ppd, target, QSFP_DEV, |
| QSFP_PAGE_SELECT_BYTE_OFFS, &page, 1); |
| if (ret != 1) { |
| hfi1_dev_porterr( |
| ppd->dd, |
| ppd->port, |
| "can't write QSFP_PAGE_SELECT_BYTE: %d\n", ret); |
| ret = -EIO; |
| break; |
| } |
| |
| /* truncate write to end of page if crossing page boundary */ |
| offset = addr % QSFP_PAGESIZE; |
| nwrite = len - count; |
| if ((offset + nwrite) > QSFP_PAGESIZE) |
| nwrite = QSFP_PAGESIZE - offset; |
| |
| ret = __i2c_write(ppd, target, QSFP_DEV, offset, bp + count, |
| nwrite); |
| if (ret <= 0) /* stop on error or nothing read */ |
| break; |
| |
| count += ret; |
| addr += ret; |
| } |
| |
| mutex_unlock(&ppd->dd->qsfp_i2c_mutex); |
| |
| if (ret < 0) |
| return ret; |
| return count; |
| } |
| |
| int qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp, |
| int len) |
| { |
| int count = 0; |
| int offset; |
| int nread; |
| int ret; |
| u8 page; |
| |
| ret = mutex_lock_interruptible(&ppd->dd->qsfp_i2c_mutex); |
| if (ret) |
| return ret; |
| |
| while (count < len) { |
| /* |
| * Set the qsfp page based on a zero-based address |
| * and a page size of QSFP_PAGESIZE bytes. |
| */ |
| page = (u8)(addr / QSFP_PAGESIZE); |
| ret = __i2c_write(ppd, target, QSFP_DEV, |
| QSFP_PAGE_SELECT_BYTE_OFFS, &page, 1); |
| if (ret != 1) { |
| hfi1_dev_porterr( |
| ppd->dd, |
| ppd->port, |
| "can't write QSFP_PAGE_SELECT_BYTE: %d\n", ret); |
| ret = -EIO; |
| break; |
| } |
| |
| /* truncate read to end of page if crossing page boundary */ |
| offset = addr % QSFP_PAGESIZE; |
| nread = len - count; |
| if ((offset + nread) > QSFP_PAGESIZE) |
| nread = QSFP_PAGESIZE - offset; |
| |
| ret = __i2c_read(ppd, target, QSFP_DEV, offset, bp + count, |
| nread); |
| if (ret <= 0) /* stop on error or nothing read */ |
| break; |
| |
| count += ret; |
| addr += ret; |
| } |
| |
| mutex_unlock(&ppd->dd->qsfp_i2c_mutex); |
| |
| if (ret < 0) |
| return ret; |
| return count; |
| } |
| |
| /* |
| * This function caches the QSFP memory range in 128 byte chunks. |
| * As an example, the next byte after address 255 is byte 128 from |
| * upper page 01H (if existing) rather than byte 0 from lower page 00H. |
| */ |
| int refresh_qsfp_cache(struct hfi1_pportdata *ppd, struct qsfp_data *cp) |
| { |
| u32 target = ppd->dd->hfi1_id; |
| int ret; |
| unsigned long flags; |
| u8 *cache = &cp->cache[0]; |
| |
| /* ensure sane contents on invalid reads, for cable swaps */ |
| memset(cache, 0, (QSFP_MAX_NUM_PAGES*128)); |
| dd_dev_info(ppd->dd, "%s: called\n", __func__); |
| if (!qsfp_mod_present(ppd)) { |
| ret = -ENODEV; |
| goto bail; |
| } |
| |
| ret = qsfp_read(ppd, target, 0, cache, 256); |
| if (ret != 256) { |
| dd_dev_info(ppd->dd, |
| "%s: Read of pages 00H failed, expected 256, got %d\n", |
| __func__, ret); |
| goto bail; |
| } |
| |
| if (cache[0] != 0x0C && cache[0] != 0x0D) |
| goto bail; |
| |
| /* Is paging enabled? */ |
| if (!(cache[2] & 4)) { |
| |
| /* Paging enabled, page 03 required */ |
| if ((cache[195] & 0xC0) == 0xC0) { |
| /* all */ |
| ret = qsfp_read(ppd, target, 384, cache + 256, 128); |
| if (ret <= 0 || ret != 128) { |
| dd_dev_info(ppd->dd, "%s: failed\n", __func__); |
| goto bail; |
| } |
| ret = qsfp_read(ppd, target, 640, cache + 384, 128); |
| if (ret <= 0 || ret != 128) { |
| dd_dev_info(ppd->dd, "%s: failed\n", __func__); |
| goto bail; |
| } |
| ret = qsfp_read(ppd, target, 896, cache + 512, 128); |
| if (ret <= 0 || ret != 128) { |
| dd_dev_info(ppd->dd, "%s: failed\n", __func__); |
| goto bail; |
| } |
| } else if ((cache[195] & 0x80) == 0x80) { |
| /* only page 2 and 3 */ |
| ret = qsfp_read(ppd, target, 640, cache + 384, 128); |
| if (ret <= 0 || ret != 128) { |
| dd_dev_info(ppd->dd, "%s: failed\n", __func__); |
| goto bail; |
| } |
| ret = qsfp_read(ppd, target, 896, cache + 512, 128); |
| if (ret <= 0 || ret != 128) { |
| dd_dev_info(ppd->dd, "%s: failed\n", __func__); |
| goto bail; |
| } |
| } else if ((cache[195] & 0x40) == 0x40) { |
| /* only page 1 and 3 */ |
| ret = qsfp_read(ppd, target, 384, cache + 256, 128); |
| if (ret <= 0 || ret != 128) { |
| dd_dev_info(ppd->dd, "%s: failed\n", __func__); |
| goto bail; |
| } |
| ret = qsfp_read(ppd, target, 896, cache + 512, 128); |
| if (ret <= 0 || ret != 128) { |
| dd_dev_info(ppd->dd, "%s: failed\n", __func__); |
| goto bail; |
| } |
| } else { |
| /* only page 3 */ |
| ret = qsfp_read(ppd, target, 896, cache + 512, 128); |
| if (ret <= 0 || ret != 128) { |
| dd_dev_info(ppd->dd, "%s: failed\n", __func__); |
| goto bail; |
| } |
| } |
| } |
| |
| spin_lock_irqsave(&ppd->qsfp_info.qsfp_lock, flags); |
| ppd->qsfp_info.cache_valid = 1; |
| ppd->qsfp_info.cache_refresh_required = 0; |
| spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock, flags); |
| |
| return 0; |
| |
| bail: |
| memset(cache, 0, (QSFP_MAX_NUM_PAGES*128)); |
| return ret; |
| } |
| |
| const char * const hfi1_qsfp_devtech[16] = { |
| "850nm VCSEL", "1310nm VCSEL", "1550nm VCSEL", "1310nm FP", |
| "1310nm DFB", "1550nm DFB", "1310nm EML", "1550nm EML", |
| "Cu Misc", "1490nm DFB", "Cu NoEq", "Cu Eq", |
| "Undef", "Cu Active BothEq", "Cu FarEq", "Cu NearEq" |
| }; |
| |
| #define QSFP_DUMP_CHUNK 16 /* Holds longest string */ |
| #define QSFP_DEFAULT_HDR_CNT 224 |
| |
| static const char *pwr_codes = "1.5W2.0W2.5W3.5W"; |
| |
| int qsfp_mod_present(struct hfi1_pportdata *ppd) |
| { |
| struct hfi1_devdata *dd = ppd->dd; |
| u64 reg; |
| |
| reg = read_csr(dd, dd->hfi1_id ? ASIC_QSFP2_IN : ASIC_QSFP1_IN); |
| return !(reg & QSFP_HFI0_MODPRST_N); |
| } |
| |
| /* |
| * This function maps QSFP memory addresses in 128 byte chunks in the following |
| * fashion per the CableInfo SMA query definition in the IBA 1.3 spec/OPA Gen 1 |
| * spec |
| * For addr 000-127, lower page 00h |
| * For addr 128-255, upper page 00h |
| * For addr 256-383, upper page 01h |
| * For addr 384-511, upper page 02h |
| * For addr 512-639, upper page 03h |
| * |
| * For addresses beyond this range, it returns the invalid range of data buffer |
| * set to 0. |
| * For upper pages that are optional, if they are not valid, returns the |
| * particular range of bytes in the data buffer set to 0. |
| */ |
| int get_cable_info(struct hfi1_devdata *dd, u32 port_num, u32 addr, u32 len, |
| u8 *data) |
| { |
| struct hfi1_pportdata *ppd; |
| u32 excess_len = 0; |
| int ret = 0; |
| |
| if (port_num > dd->num_pports || port_num < 1) { |
| dd_dev_info(dd, "%s: Invalid port number %d\n", |
| __func__, port_num); |
| ret = -EINVAL; |
| goto set_zeroes; |
| } |
| |
| ppd = dd->pport + (port_num - 1); |
| if (!qsfp_mod_present(ppd)) { |
| ret = -ENODEV; |
| goto set_zeroes; |
| } |
| |
| if (!ppd->qsfp_info.cache_valid) { |
| ret = -EINVAL; |
| goto set_zeroes; |
| } |
| |
| if (addr >= (QSFP_MAX_NUM_PAGES * 128)) { |
| ret = -ERANGE; |
| goto set_zeroes; |
| } |
| |
| if ((addr + len) > (QSFP_MAX_NUM_PAGES * 128)) { |
| excess_len = (addr + len) - (QSFP_MAX_NUM_PAGES * 128); |
| memcpy(data, &ppd->qsfp_info.cache[addr], (len - excess_len)); |
| data += (len - excess_len); |
| goto set_zeroes; |
| } |
| |
| memcpy(data, &ppd->qsfp_info.cache[addr], len); |
| return 0; |
| |
| set_zeroes: |
| memset(data, 0, excess_len); |
| return ret; |
| } |
| |
| int qsfp_dump(struct hfi1_pportdata *ppd, char *buf, int len) |
| { |
| u8 *cache = &ppd->qsfp_info.cache[0]; |
| u8 bin_buff[QSFP_DUMP_CHUNK]; |
| char lenstr[6]; |
| int sofar, ret; |
| int bidx = 0; |
| u8 *atten = &cache[QSFP_ATTEN_OFFS]; |
| u8 *vendor_oui = &cache[QSFP_VOUI_OFFS]; |
| |
| sofar = 0; |
| lenstr[0] = ' '; |
| lenstr[1] = '\0'; |
| |
| if (ppd->qsfp_info.cache_valid) { |
| |
| if (QSFP_IS_CU(cache[QSFP_MOD_TECH_OFFS])) |
| sprintf(lenstr, "%dM ", cache[QSFP_MOD_LEN_OFFS]); |
| |
| sofar += scnprintf(buf + sofar, len - sofar, "PWR:%.3sW\n", |
| pwr_codes + |
| (QSFP_PWR(cache[QSFP_MOD_PWR_OFFS]) * 4)); |
| |
| sofar += scnprintf(buf + sofar, len - sofar, "TECH:%s%s\n", |
| lenstr, |
| hfi1_qsfp_devtech[(cache[QSFP_MOD_TECH_OFFS]) >> 4]); |
| |
| sofar += scnprintf(buf + sofar, len - sofar, "Vendor:%.*s\n", |
| QSFP_VEND_LEN, &cache[QSFP_VEND_OFFS]); |
| |
| sofar += scnprintf(buf + sofar, len - sofar, "OUI:%06X\n", |
| QSFP_OUI(vendor_oui)); |
| |
| sofar += scnprintf(buf + sofar, len - sofar, "Part#:%.*s\n", |
| QSFP_PN_LEN, &cache[QSFP_PN_OFFS]); |
| |
| sofar += scnprintf(buf + sofar, len - sofar, "Rev:%.*s\n", |
| QSFP_REV_LEN, &cache[QSFP_REV_OFFS]); |
| |
| if (QSFP_IS_CU(cache[QSFP_MOD_TECH_OFFS])) |
| sofar += scnprintf(buf + sofar, len - sofar, |
| "Atten:%d, %d\n", |
| QSFP_ATTEN_SDR(atten), |
| QSFP_ATTEN_DDR(atten)); |
| |
| sofar += scnprintf(buf + sofar, len - sofar, "Serial:%.*s\n", |
| QSFP_SN_LEN, &cache[QSFP_SN_OFFS]); |
| |
| sofar += scnprintf(buf + sofar, len - sofar, "Date:%.*s\n", |
| QSFP_DATE_LEN, &cache[QSFP_DATE_OFFS]); |
| |
| sofar += scnprintf(buf + sofar, len - sofar, "Lot:%.*s\n", |
| QSFP_LOT_LEN, &cache[QSFP_LOT_OFFS]); |
| |
| while (bidx < QSFP_DEFAULT_HDR_CNT) { |
| int iidx; |
| |
| memcpy(bin_buff, &cache[bidx], QSFP_DUMP_CHUNK); |
| for (iidx = 0; iidx < QSFP_DUMP_CHUNK; ++iidx) { |
| sofar += scnprintf(buf + sofar, len-sofar, |
| " %02X", bin_buff[iidx]); |
| } |
| sofar += scnprintf(buf + sofar, len - sofar, "\n"); |
| bidx += QSFP_DUMP_CHUNK; |
| } |
| } |
| ret = sofar; |
| return ret; |
| } |