| /* |
| * ADIS16204 Programmable High-g Digital Impact Sensor and Recorder |
| * |
| * Copyright 2010 Analog Devices Inc. |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/delay.h> |
| #include <linux/mutex.h> |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/spi/spi.h> |
| #include <linux/slab.h> |
| #include <linux/sysfs.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/imu/adis.h> |
| |
| #include "adis16204.h" |
| |
| /* Unique to this driver currently */ |
| |
| static const u8 adis16204_addresses[][2] = { |
| [ADIS16204_SCAN_ACC_X] = { ADIS16204_XACCL_NULL, ADIS16204_X_PEAK_OUT }, |
| [ADIS16204_SCAN_ACC_Y] = { ADIS16204_YACCL_NULL, ADIS16204_Y_PEAK_OUT }, |
| [ADIS16204_SCAN_ACC_XY] = { 0, ADIS16204_XY_PEAK_OUT }, |
| }; |
| |
| static int adis16204_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, |
| long mask) |
| { |
| struct adis *st = iio_priv(indio_dev); |
| int ret; |
| int bits; |
| u8 addr; |
| s16 val16; |
| int addrind; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| return adis_single_conversion(indio_dev, chan, |
| ADIS16204_ERROR_ACTIVE, val); |
| case IIO_CHAN_INFO_SCALE: |
| switch (chan->type) { |
| case IIO_VOLTAGE: |
| if (chan->channel == 0) { |
| *val = 1; |
| *val2 = 220000; /* 1.22 mV */ |
| } else { |
| *val = 0; |
| *val2 = 610000; /* 0.61 mV */ |
| } |
| return IIO_VAL_INT_PLUS_MICRO; |
| case IIO_TEMP: |
| *val = -470; /* 0.47 C */ |
| *val2 = 0; |
| return IIO_VAL_INT_PLUS_MICRO; |
| case IIO_ACCEL: |
| *val = 0; |
| switch (chan->channel2) { |
| case IIO_MOD_X: |
| case IIO_MOD_ROOT_SUM_SQUARED_X_Y: |
| *val2 = IIO_G_TO_M_S_2(17125); /* 17.125 mg */ |
| break; |
| case IIO_MOD_Y: |
| case IIO_MOD_Z: |
| *val2 = IIO_G_TO_M_S_2(8407); /* 8.407 mg */ |
| break; |
| } |
| return IIO_VAL_INT_PLUS_MICRO; |
| default: |
| return -EINVAL; |
| } |
| break; |
| case IIO_CHAN_INFO_OFFSET: |
| *val = 25000 / -470 - 1278; /* 25 C = 1278 */ |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_CALIBBIAS: |
| case IIO_CHAN_INFO_PEAK: |
| if (mask == IIO_CHAN_INFO_CALIBBIAS) { |
| bits = 12; |
| addrind = 0; |
| } else { /* PEAK_SEPARATE */ |
| bits = 14; |
| addrind = 1; |
| } |
| mutex_lock(&indio_dev->mlock); |
| addr = adis16204_addresses[chan->scan_index][addrind]; |
| ret = adis_read_reg_16(st, addr, &val16); |
| if (ret) { |
| mutex_unlock(&indio_dev->mlock); |
| return ret; |
| } |
| val16 &= (1 << bits) - 1; |
| val16 = (s16)(val16 << (16 - bits)) >> (16 - bits); |
| *val = val16; |
| mutex_unlock(&indio_dev->mlock); |
| return IIO_VAL_INT; |
| } |
| return -EINVAL; |
| } |
| |
| static int adis16204_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, |
| int val2, |
| long mask) |
| { |
| struct adis *st = iio_priv(indio_dev); |
| int bits; |
| s16 val16; |
| u8 addr; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_CALIBBIAS: |
| switch (chan->type) { |
| case IIO_ACCEL: |
| bits = 12; |
| break; |
| default: |
| return -EINVAL; |
| } |
| val16 = val & ((1 << bits) - 1); |
| addr = adis16204_addresses[chan->scan_index][1]; |
| return adis_write_reg_16(st, addr, val16); |
| } |
| return -EINVAL; |
| } |
| |
| static const struct iio_chan_spec adis16204_channels[] = { |
| ADIS_SUPPLY_CHAN(ADIS16204_SUPPLY_OUT, ADIS16204_SCAN_SUPPLY, 0, 12), |
| ADIS_AUX_ADC_CHAN(ADIS16204_AUX_ADC, ADIS16204_SCAN_AUX_ADC, 0, 12), |
| ADIS_TEMP_CHAN(ADIS16204_TEMP_OUT, ADIS16204_SCAN_TEMP, 0, 12), |
| ADIS_ACCEL_CHAN(X, ADIS16204_XACCL_OUT, ADIS16204_SCAN_ACC_X, |
| BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK), |
| 0, 14), |
| ADIS_ACCEL_CHAN(Y, ADIS16204_YACCL_OUT, ADIS16204_SCAN_ACC_Y, |
| BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK), |
| 0, 14), |
| ADIS_ACCEL_CHAN(ROOT_SUM_SQUARED_X_Y, ADIS16204_XY_RSS_OUT, |
| ADIS16204_SCAN_ACC_XY, BIT(IIO_CHAN_INFO_PEAK), 0, 14), |
| IIO_CHAN_SOFT_TIMESTAMP(5), |
| }; |
| |
| static const struct iio_info adis16204_info = { |
| .read_raw = &adis16204_read_raw, |
| .write_raw = &adis16204_write_raw, |
| .update_scan_mode = adis_update_scan_mode, |
| .driver_module = THIS_MODULE, |
| }; |
| |
| static const char * const adis16204_status_error_msgs[] = { |
| [ADIS16204_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure", |
| [ADIS16204_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure", |
| [ADIS16204_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed", |
| [ADIS16204_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V", |
| [ADIS16204_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 2.975V", |
| }; |
| |
| static const struct adis_data adis16204_data = { |
| .read_delay = 20, |
| .msc_ctrl_reg = ADIS16204_MSC_CTRL, |
| .glob_cmd_reg = ADIS16204_GLOB_CMD, |
| .diag_stat_reg = ADIS16204_DIAG_STAT, |
| |
| .self_test_mask = ADIS16204_MSC_CTRL_SELF_TEST_EN, |
| .startup_delay = ADIS16204_STARTUP_DELAY, |
| |
| .status_error_msgs = adis16204_status_error_msgs, |
| .status_error_mask = BIT(ADIS16204_DIAG_STAT_SELFTEST_FAIL_BIT) | |
| BIT(ADIS16204_DIAG_STAT_SPI_FAIL_BIT) | |
| BIT(ADIS16204_DIAG_STAT_FLASH_UPT_BIT) | |
| BIT(ADIS16204_DIAG_STAT_POWER_HIGH_BIT) | |
| BIT(ADIS16204_DIAG_STAT_POWER_LOW_BIT), |
| }; |
| |
| static int adis16204_probe(struct spi_device *spi) |
| { |
| int ret; |
| struct adis *st; |
| struct iio_dev *indio_dev; |
| |
| /* setup the industrialio driver allocated elements */ |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); |
| if (!indio_dev) |
| return -ENOMEM; |
| st = iio_priv(indio_dev); |
| /* this is only used for removal purposes */ |
| spi_set_drvdata(spi, indio_dev); |
| |
| indio_dev->name = spi->dev.driver->name; |
| indio_dev->dev.parent = &spi->dev; |
| indio_dev->info = &adis16204_info; |
| indio_dev->channels = adis16204_channels; |
| indio_dev->num_channels = ARRAY_SIZE(adis16204_channels); |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| ret = adis_init(st, indio_dev, spi, &adis16204_data); |
| if (ret) |
| return ret; |
| |
| ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL); |
| if (ret) |
| return ret; |
| |
| /* Get the device into a sane initial state */ |
| ret = adis_initial_startup(st); |
| if (ret) |
| goto error_cleanup_buffer_trigger; |
| ret = iio_device_register(indio_dev); |
| if (ret) |
| goto error_cleanup_buffer_trigger; |
| |
| return 0; |
| |
| error_cleanup_buffer_trigger: |
| adis_cleanup_buffer_and_trigger(st, indio_dev); |
| return ret; |
| } |
| |
| static int adis16204_remove(struct spi_device *spi) |
| { |
| struct iio_dev *indio_dev = spi_get_drvdata(spi); |
| struct adis *st = iio_priv(indio_dev); |
| |
| iio_device_unregister(indio_dev); |
| adis_cleanup_buffer_and_trigger(st, indio_dev); |
| |
| return 0; |
| } |
| |
| static struct spi_driver adis16204_driver = { |
| .driver = { |
| .name = "adis16204", |
| }, |
| .probe = adis16204_probe, |
| .remove = adis16204_remove, |
| }; |
| module_spi_driver(adis16204_driver); |
| |
| MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); |
| MODULE_DESCRIPTION("ADIS16204 High-g Digital Impact Sensor and Recorder"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("spi:adis16204"); |