| # |
| # for USB OTG silicon based on Mentor Graphics INVENTRA designs |
| # |
| |
| obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o |
| |
| musb_hdrc-y := musb_core.o |
| |
| musb_hdrc-$(CONFIG_USB_MUSB_HOST)$(CONFIG_USB_MUSB_DUAL_ROLE) += musb_virthub.o musb_host.o |
| musb_hdrc-$(CONFIG_USB_MUSB_GADGET)$(CONFIG_USB_MUSB_DUAL_ROLE) += musb_gadget_ep0.o musb_gadget.o |
| musb_hdrc-$(CONFIG_DEBUG_FS) += musb_debugfs.o |
| |
| # Hardware Glue Layer |
| obj-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o |
| obj-$(CONFIG_USB_MUSB_AM35X) += am35x.o |
| obj-$(CONFIG_USB_MUSB_DSPS) += musb_dsps.o |
| obj-$(CONFIG_USB_MUSB_TUSB6010) += tusb6010.o |
| obj-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o |
| obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o |
| obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o |
| obj-$(CONFIG_USB_MUSB_UX500) += ux500.o |
| obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o |
| obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o |
| |
| |
| obj-$(CONFIG_USB_MUSB_AM335X_CHILD) += musb_am335x.o |
| |
| # the kconfig must guarantee that only one of the |
| # possible I/O schemes will be enabled at a time ... |
| # PIO only, or DMA (several potential schemes). |
| # though PIO is always there to back up DMA, and for ep0 |
| |
| musb_hdrc-$(CONFIG_USB_INVENTRA_DMA) += musbhsdma.o |
| musb_hdrc-$(CONFIG_USB_TI_CPPI_DMA) += cppi_dma.o |
| musb_hdrc-$(CONFIG_USB_TUSB_OMAP_DMA) += tusb6010_omap.o |
| musb_hdrc-$(CONFIG_USB_UX500_DMA) += ux500_dma.o |
| musb_hdrc-$(CONFIG_USB_TI_CPPI41_DMA) += musb_cppi41.o |
