drivers/atm/uPD98401.h - kernel/bruno - Git at Google

 /* drivers/atm/uPD98401.h - NEC uPD98401 (SAR) declarations */

 /* Written 1995 by Werner Almesberger, EPFL LRC */


 #ifndef DRIVERS_ATM_uPD98401_H
 #define DRIVERS_ATM_uPD98401_H


 #define MAX_CRAM_SIZE	(1 << 18)	/* 2^18 words */
 #define RAM_INCREMENT	1024		/* check in 4 kB increments */

 #define uPD98401_PORTS	0x24		/* probably more ? */


 /*
  * Commands
  */

 #define uPD98401_OPEN_CHAN	0x20000000 /* open channel */
 #define uPD98401_CHAN_ADDR	0x0003fff8 /*	channel address */
 #define uPD98401_CHAN_ADDR_SHIFT 3
 #define uPD98401_CLOSE_CHAN	0x24000000 /* close channel */
 #define uPD98401_CHAN_RT	0x02000000 /*	RX/TX (0 TX, 1 RX) */
 #define uPD98401_DEACT_CHAN	0x28000000 /* deactivate channel */
 #define uPD98401_TX_READY	0x30000000 /* TX ready */
 #define uPD98401_ADD_BAT	0x34000000 /* add batches */
 #define uPD98401_POOL		0x000f0000 /* pool number */
 #define uPD98401_POOL_SHIFT	16
 #define uPD98401_POOL_NUMBAT	0x0000ffff /* number of batches */
 #define uPD98401_NOP		0x3f000000 /* NOP */
 #define uPD98401_IND_ACC	0x00000000 /* Indirect Access */
 #define uPD98401_IA_RW		0x10000000 /*	Read/Write (0 W, 1 R) */
 #define uPD98401_IA_B3		0x08000000 /*	Byte select, 1 enable */
 #define uPD98401_IA_B2		0x04000000
 #define uPD98401_IA_B1		0x02000000
 #define uPD98401_IA_B0		0x01000000
 #define uPD98401_IA_BALL	0x0f000000 /*   whole longword */
 #define uPD98401_IA_TGT		0x000c0000 /*	Target */
 #define uPD98401_IA_TGT_SHIFT	18
 #define uPD98401_IA_TGT_CM	0	   /*	- Control Memory */
 #define uPD98401_IA_TGT_SAR	1	   /*	- uPD98401 registers */
 #define uPD98401_IA_TGT_PHY	3	   /*   - PHY device */
 #define uPD98401_IA_ADDR	0x0003ffff

 /*
  * Command Register Status
  */

 #define uPD98401_BUSY		0x80000000 /* SAR is busy */
 #define uPD98401_LOCKED		0x40000000 /* SAR is locked by other CPU */

 /*
  * Indications
  */

 /* Normal (AAL5) Receive Indication */
 #define uPD98401_AAL5_UINFO	0xffff0000 /* user-supplied information */
 #define uPD98401_AAL5_UINFO_SHIFT 16
 #define uPD98401_AAL5_SIZE	0x0000ffff /* PDU size (in _CELLS_ !!) */
 #define uPD98401_AAL5_CHAN	0x7fff0000 /* Channel number */
 #define uPD98401_AAL5_CHAN_SHIFT	16
 #define uPD98401_AAL5_ERR	0x00008000 /* Error indication */
 #define uPD98401_AAL5_CI	0x00004000 /* Congestion Indication */
 #define uPD98401_AAL5_CLP	0x00002000 /* CLP (>= 1 cell had CLP=1) */
 #define uPD98401_AAL5_ES	0x00000f00 /* Error Status */
 #define uPD98401_AAL5_ES_SHIFT	8
 #define uPD98401_AAL5_ES_NONE	0	   /*	No error */
 #define uPD98401_AAL5_ES_FREE	1	   /*	Receiver free buf underflow */
 #define uPD98401_AAL5_ES_FIFO	2	   /*	Receiver FIFO overrun */
 #define uPD98401_AAL5_ES_TOOBIG	3	   /*	Maximum length violation */
 #define uPD98401_AAL5_ES_CRC	4	   /*	CRC error */
 #define uPD98401_AAL5_ES_ABORT	5	   /*	User abort */
 #define uPD98401_AAL5_ES_LENGTH	6	   /*   Length violation */
 #define uPD98401_AAL5_ES_T1	7	   /*	T1 error (timeout) */
 #define uPD98401_AAL5_ES_DEACT	8	   /*	Deactivated with DEACT_CHAN */
 #define uPD98401_AAL5_POOL	0x0000001f /* Free buffer pool number */

 /* Raw Cell Indication */
 #define uPD98401_RAW_UINFO	uPD98401_AAL5_UINFO
 #define uPD98401_RAW_UINFO_SHIFT uPD98401_AAL5_UINFO_SHIFT
 #define uPD98401_RAW_HEC	0x000000ff /* HEC */
 #define uPD98401_RAW_CHAN	uPD98401_AAL5_CHAN
 #define uPD98401_RAW_CHAN_SHIFT uPD98401_AAL5_CHAN_SHIFT

 /* Transmit Indication */
 #define uPD98401_TXI_CONN	0x7fff0000 /* Connection Number */
 #define uPD98401_TXI_CONN_SHIFT	16
 #define uPD98401_TXI_ACTIVE	0x00008000 /* Channel remains active */
 #define uPD98401_TXI_PQP	0x00007fff /* Packet Queue Pointer */

 /*
  * Directly Addressable Registers
  */

 #define uPD98401_GMR	0x00	/* General Mode Register */
 #define uPD98401_GSR	0x01	/* General Status Register */
 #define uPD98401_IMR	0x02	/* Interrupt Mask Register */
 #define uPD98401_RQU	0x03	/* Receive Queue Underrun */
 #define uPD98401_RQA	0x04	/* Receive Queue Alert */
 #define uPD98401_ADDR	0x05	/* Last Burst Address */
 #define uPD98401_VER	0x06	/* Version Number */
 #define uPD98401_SWR	0x07	/* Software Reset */
 #define uPD98401_CMR	0x08	/* Command Register */
 #define uPD98401_CMR_L	0x09	/* Command Register and Lock/Unlock */
 #define uPD98401_CER	0x0a	/* Command Extension Register */
 #define uPD98401_CER_L	0x0b	/* Command Ext Reg and Lock/Unlock */

 #define uPD98401_MSH(n) (0x10+(n))	/* Mailbox n Start Address High */
 #define uPD98401_MSL(n) (0x14+(n))	/* Mailbox n Start Address High */
 #define uPD98401_MBA(n) (0x18+(n))	/* Mailbox n Bottom Address */
 #define uPD98401_MTA(n) (0x1c+(n))	/* Mailbox n Tail Address */
 #define uPD98401_MWA(n) (0x20+(n))	/* Mailbox n Write Address */

 /* GMR is at 0x00 */
 #define uPD98401_GMR_ONE	0x80000000 /* Must be set to one */
 #define uPD98401_GMR_SLM	0x40000000 /* Address mode (0 word, 1 byte) */
 #define uPD98401_GMR_CPE	0x00008000 /* Control Memory Parity Enable */
 #define uPD98401_GMR_LP		0x00004000 /* Loopback */
 #define uPD98401_GMR_WA		0x00002000 /* Early Bus Write Abort/RDY */
 #define uPD98401_GMR_RA		0x00001000 /* Early Read Abort/RDY */
 #define uPD98401_GMR_SZ		0x00000f00 /* Burst Size Enable */
 #define uPD98401_BURST16	0x00000800 /*	16-word burst */
 #define uPD98401_BURST8		0x00000400 /*	 8-word burst */
 #define uPD98401_BURST4		0x00000200 /*	 4-word burst */
 #define uPD98401_BURST2		0x00000100 /*	 2-word burst */
 #define uPD98401_GMR_AD		0x00000080 /* Address (burst resolution) Disable */
 #define uPD98401_GMR_BO		0x00000040 /* Byte Order (0 little, 1 big) */
 #define uPD98401_GMR_PM		0x00000020 /* Bus Parity Mode (0 byte, 1 word)*/
 #define uPD98401_GMR_PC		0x00000010 /* Bus Parity Control (0even,1odd) */
 #define uPD98401_GMR_BPE	0x00000008 /* Bus Parity Enable */
 #define uPD98401_GMR_DR		0x00000004 /* Receive Drop Mode (0drop,1don't)*/
 #define uPD98401_GMR_SE		0x00000002 /* Shapers Enable */
 #define uPD98401_GMR_RE		0x00000001 /* Receiver Enable */

 /* GSR is at 0x01, IMR is at 0x02 */
 #define uPD98401_INT_PI		0x80000000 /* PHY interrupt */
 #define uPD98401_INT_RQA	0x40000000 /* Receive Queue Alert */
 #define uPD98401_INT_RQU	0x20000000 /* Receive Queue Underrun */
 #define uPD98401_INT_RD		0x10000000 /* Receiver Deactivated */
 #define uPD98401_INT_SPE	0x08000000 /* System Parity Error */
 #define uPD98401_INT_CPE	0x04000000 /* Control Memory Parity Error */
 #define uPD98401_INT_SBE	0x02000000 /* System Bus Error */
 #define uPD98401_INT_IND	0x01000000 /* Initialization Done */
 #define uPD98401_INT_RCR	0x0000ff00 /* Raw Cell Received */
 #define uPD98401_INT_RCR_SHIFT	8
 #define uPD98401_INT_MF		0x000000f0 /* Mailbox Full */
 #define uPD98401_INT_MF_SHIFT	4
 #define uPD98401_INT_MM		0x0000000f /* Mailbox Modified */

 /* VER is at 0x06 */
 #define uPD98401_MAJOR		0x0000ff00 /* Major revision */
 #define uPD98401_MAJOR_SHIFT	8
 #define uPD98401_MINOR		0x000000ff /* Minor revision */

 /*
  * Indirectly Addressable Registers
  */

 #define uPD98401_IM(n)	(0x40000+(n))	/* Scheduler n I and M */
 #define uPD98401_X(n)	(0x40010+(n))	/* Scheduler n X */
 #define uPD98401_Y(n)	(0x40020+(n))	/* Scheduler n Y */
 #define uPD98401_PC(n)	(0x40030+(n))	/* Scheduler n P, C, p and c */
 #define uPD98401_PS(n)	(0x40040+(n))	/* Scheduler n priority and status */

 /* IM contents */
 #define uPD98401_IM_I		0xff000000 /* I */
 #define uPD98401_IM_I_SHIFT	24
 #define uPD98401_IM_M		0x00ffffff /* M */

 /* PC contents */
 #define uPD98401_PC_P		0xff000000 /* P */
 #define uPD98401_PC_P_SHIFT	24
 #define uPD98401_PC_C		0x00ff0000 /* C */
 #define uPD98401_PC_C_SHIFT	16
 #define uPD98401_PC_p		0x0000ff00 /* p */
 #define uPD98401_PC_p_SHIFT	8
 #define uPD98401_PC_c		0x000000ff /* c */

 /* PS contents */
 #define uPD98401_PS_PRIO	0xf0	/* Priority level (0 high, 15 low) */
 #define uPD98401_PS_PRIO_SHIFT	4
 #define uPD98401_PS_S		0x08	/* Scan - must be 0 (internal) */
 #define uPD98401_PS_R		0x04	/* Round Robin (internal) */
 #define uPD98401_PS_A		0x02	/* Active (internal) */
 #define uPD98401_PS_E		0x01	/* Enabled */

 #define uPD98401_TOS	0x40100	/* Top of Stack Control Memory Address */
 #define uPD98401_SMA	0x40200	/* Shapers Control Memory Start Address */
 #define uPD98401_PMA	0x40201	/* Receive Pool Control Memory Start Address */
 #define uPD98401_T1R	0x40300	/* T1 Register */
 #define uPD98401_VRR	0x40301	/* VPI/VCI Reduction Register/Recv. Shutdown */
 #define uPD98401_TSR	0x40302	/* Time-Stamp Register */

 /* VRR is at 0x40301 */
 #define uPD98401_VRR_SDM	0x80000000 /* Shutdown Mode */
 #define uPD98401_VRR_SHIFT	0x000f0000 /* VPI/VCI Shift */
 #define uPD98401_VRR_SHIFT_SHIFT 16
 #define uPD98401_VRR_MASK	0x0000ffff /* VPI/VCI mask */

 /*
  * TX packet descriptor
  */

 #define uPD98401_TXPD_SIZE	16	   /* descriptor size (in bytes) */

 #define uPD98401_TXPD_V		0x80000000 /* Valid bit */
 #define uPD98401_TXPD_DP	0x40000000 /* Descriptor (1) or Pointer (0) */
 #define uPD98401_TXPD_SM	0x20000000 /* Single (1) or Multiple (0) */
 #define uPD98401_TXPD_CLPM	0x18000000 /* CLP mode */
 #define uPD98401_CLPM_0		0	   /*	00 CLP = 0 */
 #define uPD98401_CLPM_1		3	   /*	11 CLP = 1 */
 #define uPD98401_CLPM_LAST	1	   /*	01 CLP unless last cell */
 #define uPD98401_TXPD_CLPM_SHIFT 27
 #define uPD98401_TXPD_PTI	0x07000000 /* PTI pattern */
 #define uPD98401_TXPD_PTI_SHIFT	24
 #define uPD98401_TXPD_GFC	0x00f00000 /* GFC pattern */
 #define uPD98401_TXPD_GFC_SHIFT	20
 #define uPD98401_TXPD_C10	0x00040000 /* insert CRC-10 */
 #define uPD98401_TXPD_AAL5	0x00020000 /* AAL5 processing */
 #define uPD98401_TXPD_MB	0x00010000 /* TX mailbox number */
 #define uPD98401_TXPD_UU	0x0000ff00 /* CPCS-UU */
 #define uPD98401_TXPD_UU_SHIFT	8
 #define uPD98401_TXPD_CPI	0x000000ff /* CPI */

 /*
  * TX buffer descriptor
  */

 #define uPD98401_TXBD_SIZE	8	   /* descriptor size (in bytes) */

 #define uPD98401_TXBD_LAST	0x80000000 /* last buffer in packet */

 /*
  * TX VC table
  */

 /* 1st word has the same structure as in a TX packet descriptor */
 #define uPD98401_TXVC_L		0x80000000 /* last buffer */
 #define uPD98401_TXVC_SHP	0x0f000000 /* shaper number */
 #define uPD98401_TXVC_SHP_SHIFT	24
 #define uPD98401_TXVC_VPI	0x00ff0000 /* VPI */
 #define uPD98401_TXVC_VPI_SHIFT	16
 #define uPD98401_TXVC_VCI	0x0000ffff /* VCI */
 #define uPD98401_TXVC_QRP	6	   /* Queue Read Pointer is in word 6 */

 /*
  * RX free buffer pools descriptor
  */

 #define uPD98401_RXFP_ALERT	0x70000000 /* low water mark */
 #define uPD98401_RXFP_ALERT_SHIFT 28
 #define uPD98401_RXFP_BFSZ	0x0f000000 /* buffer size, 64*2^n */
 #define uPD98401_RXFP_BFSZ_SHIFT 24
 #define uPD98401_RXFP_BTSZ	0x00ff0000 /* batch size, n+1 */
 #define uPD98401_RXFP_BTSZ_SHIFT 16
 #define uPD98401_RXFP_REMAIN	0x0000ffff /* remaining batches in pool */

 /*
  * RX VC table
  */

 #define uPD98401_RXVC_BTSZ	0xff000000 /* remaining free buffers in batch */
 #define uPD98401_RXVC_BTSZ_SHIFT 24
 #define uPD98401_RXVC_MB	0x00200000 /* RX mailbox number */
 #define uPD98401_RXVC_POOL	0x001f0000 /* free buffer pool number */
 #define uPD98401_RXVC_POOL_SHIFT 16
 #define uPD98401_RXVC_UINFO	0x0000ffff /* user-supplied information */
 #define uPD98401_RXVC_T1	0xffff0000 /* T1 timestamp */
 #define uPD98401_RXVC_T1_SHIFT	16
 #define uPD98401_RXVC_PR	0x00008000 /* Packet Reception, 1 if busy */
 #define uPD98401_RXVC_DR	0x00004000 /* FIFO Drop */
 #define uPD98401_RXVC_OD	0x00001000 /* Drop OAM cells */
 #define uPD98401_RXVC_AR	0x00000800 /* AAL5 or raw cell; 1 if AAL5 */
 #define uPD98401_RXVC_MAXSEG	0x000007ff /* max number of segments per PDU */
 #define uPD98401_RXVC_REM	0xfffe0000 /* remaining words in curr buffer */
 #define uPD98401_RXVC_REM_SHIFT	17
 #define uPD98401_RXVC_CLP	0x00010000 /* CLP received */
 #define uPD98401_RXVC_BFA	0x00008000 /* Buffer Assigned */
 #define uPD98401_RXVC_BTA	0x00004000 /* Batch Assigned */
 #define uPD98401_RXVC_CI	0x00002000 /* Congestion Indication */
 #define uPD98401_RXVC_DD	0x00001000 /* Dropping incoming cells */
 #define uPD98401_RXVC_DP	0x00000800 /* like PR ? */
 #define uPD98401_RXVC_CURSEG	0x000007ff /* Current Segment count */

 /*
  * RX lookup table
  */

 #define uPD98401_RXLT_ENBL	0x8000	   /* Enable */

 #endif
	/* drivers/atm/uPD98401.h - NEC uPD98401 (SAR) declarations */

	/* Written 1995 by Werner Almesberger, EPFL LRC */


	#ifndef DRIVERS_ATM_uPD98401_H
	#define DRIVERS_ATM_uPD98401_H


	#define MAX_CRAM_SIZE (1 << 18) /* 2^18 words */
	#define RAM_INCREMENT 1024 /* check in 4 kB increments */

	#define uPD98401_PORTS 0x24 /* probably more ? */


	/*
	* Commands
	*/

	#define uPD98401_OPEN_CHAN 0x20000000 /* open channel */
	#define uPD98401_CHAN_ADDR 0x0003fff8 /* channel address */
	#define uPD98401_CHAN_ADDR_SHIFT 3
	#define uPD98401_CLOSE_CHAN 0x24000000 /* close channel */
	#define uPD98401_CHAN_RT 0x02000000 /* RX/TX (0 TX, 1 RX) */
	#define uPD98401_DEACT_CHAN 0x28000000 /* deactivate channel */
	#define uPD98401_TX_READY 0x30000000 /* TX ready */
	#define uPD98401_ADD_BAT 0x34000000 /* add batches */
	#define uPD98401_POOL 0x000f0000 /* pool number */
	#define uPD98401_POOL_SHIFT 16
	#define uPD98401_POOL_NUMBAT 0x0000ffff /* number of batches */
	#define uPD98401_NOP 0x3f000000 /* NOP */
	#define uPD98401_IND_ACC 0x00000000 /* Indirect Access */
	#define uPD98401_IA_RW 0x10000000 /* Read/Write (0 W, 1 R) */
	#define uPD98401_IA_B3 0x08000000 /* Byte select, 1 enable */
	#define uPD98401_IA_B2 0x04000000
	#define uPD98401_IA_B1 0x02000000
	#define uPD98401_IA_B0 0x01000000
	#define uPD98401_IA_BALL 0x0f000000 /* whole longword */
	#define uPD98401_IA_TGT 0x000c0000 /* Target */
	#define uPD98401_IA_TGT_SHIFT 18
	#define uPD98401_IA_TGT_CM 0 /* - Control Memory */
	#define uPD98401_IA_TGT_SAR 1 /* - uPD98401 registers */
	#define uPD98401_IA_TGT_PHY 3 /* - PHY device */
	#define uPD98401_IA_ADDR 0x0003ffff

	/*
	* Command Register Status
	*/

	#define uPD98401_BUSY 0x80000000 /* SAR is busy */
	#define uPD98401_LOCKED 0x40000000 /* SAR is locked by other CPU */

	/*
	* Indications
	*/

	/* Normal (AAL5) Receive Indication */
	#define uPD98401_AAL5_UINFO 0xffff0000 /* user-supplied information */
	#define uPD98401_AAL5_UINFO_SHIFT 16
	#define uPD98401_AAL5_SIZE 0x0000ffff /* PDU size (in _CELLS_ !!) */
	#define uPD98401_AAL5_CHAN 0x7fff0000 /* Channel number */
	#define uPD98401_AAL5_CHAN_SHIFT 16
	#define uPD98401_AAL5_ERR 0x00008000 /* Error indication */
	#define uPD98401_AAL5_CI 0x00004000 /* Congestion Indication */
	#define uPD98401_AAL5_CLP 0x00002000 /* CLP (>= 1 cell had CLP=1) */
	#define uPD98401_AAL5_ES 0x00000f00 /* Error Status */
	#define uPD98401_AAL5_ES_SHIFT 8
	#define uPD98401_AAL5_ES_NONE 0 /* No error */
	#define uPD98401_AAL5_ES_FREE 1 /* Receiver free buf underflow */
	#define uPD98401_AAL5_ES_FIFO 2 /* Receiver FIFO overrun */
	#define uPD98401_AAL5_ES_TOOBIG 3 /* Maximum length violation */
	#define uPD98401_AAL5_ES_CRC 4 /* CRC error */
	#define uPD98401_AAL5_ES_ABORT 5 /* User abort */
	#define uPD98401_AAL5_ES_LENGTH 6 /* Length violation */
	#define uPD98401_AAL5_ES_T1 7 /* T1 error (timeout) */
	#define uPD98401_AAL5_ES_DEACT 8 /* Deactivated with DEACT_CHAN */
	#define uPD98401_AAL5_POOL 0x0000001f /* Free buffer pool number */

	/* Raw Cell Indication */
	#define uPD98401_RAW_UINFO uPD98401_AAL5_UINFO
	#define uPD98401_RAW_UINFO_SHIFT uPD98401_AAL5_UINFO_SHIFT
	#define uPD98401_RAW_HEC 0x000000ff /* HEC */
	#define uPD98401_RAW_CHAN uPD98401_AAL5_CHAN
	#define uPD98401_RAW_CHAN_SHIFT uPD98401_AAL5_CHAN_SHIFT

	/* Transmit Indication */
	#define uPD98401_TXI_CONN 0x7fff0000 /* Connection Number */
	#define uPD98401_TXI_CONN_SHIFT 16
	#define uPD98401_TXI_ACTIVE 0x00008000 /* Channel remains active */
	#define uPD98401_TXI_PQP 0x00007fff /* Packet Queue Pointer */

	/*
	* Directly Addressable Registers
	*/

	#define uPD98401_GMR 0x00 /* General Mode Register */
	#define uPD98401_GSR 0x01 /* General Status Register */
	#define uPD98401_IMR 0x02 /* Interrupt Mask Register */
	#define uPD98401_RQU 0x03 /* Receive Queue Underrun */
	#define uPD98401_RQA 0x04 /* Receive Queue Alert */
	#define uPD98401_ADDR 0x05 /* Last Burst Address */
	#define uPD98401_VER 0x06 /* Version Number */
	#define uPD98401_SWR 0x07 /* Software Reset */
	#define uPD98401_CMR 0x08 /* Command Register */
	#define uPD98401_CMR_L 0x09 /* Command Register and Lock/Unlock */
	#define uPD98401_CER 0x0a /* Command Extension Register */
	#define uPD98401_CER_L 0x0b /* Command Ext Reg and Lock/Unlock */

	#define uPD98401_MSH(n) (0x10+(n)) /* Mailbox n Start Address High */
	#define uPD98401_MSL(n) (0x14+(n)) /* Mailbox n Start Address High */
	#define uPD98401_MBA(n) (0x18+(n)) /* Mailbox n Bottom Address */
	#define uPD98401_MTA(n) (0x1c+(n)) /* Mailbox n Tail Address */
	#define uPD98401_MWA(n) (0x20+(n)) /* Mailbox n Write Address */

	/* GMR is at 0x00 */
	#define uPD98401_GMR_ONE 0x80000000 /* Must be set to one */
	#define uPD98401_GMR_SLM 0x40000000 /* Address mode (0 word, 1 byte) */
	#define uPD98401_GMR_CPE 0x00008000 /* Control Memory Parity Enable */
	#define uPD98401_GMR_LP 0x00004000 /* Loopback */
	#define uPD98401_GMR_WA 0x00002000 /* Early Bus Write Abort/RDY */
	#define uPD98401_GMR_RA 0x00001000 /* Early Read Abort/RDY */
	#define uPD98401_GMR_SZ 0x00000f00 /* Burst Size Enable */
	#define uPD98401_BURST16 0x00000800 /* 16-word burst */
	#define uPD98401_BURST8 0x00000400 /* 8-word burst */
	#define uPD98401_BURST4 0x00000200 /* 4-word burst */
	#define uPD98401_BURST2 0x00000100 /* 2-word burst */
	#define uPD98401_GMR_AD 0x00000080 /* Address (burst resolution) Disable */
	#define uPD98401_GMR_BO 0x00000040 /* Byte Order (0 little, 1 big) */
	#define uPD98401_GMR_PM 0x00000020 /* Bus Parity Mode (0 byte, 1 word)*/
	#define uPD98401_GMR_PC 0x00000010 /* Bus Parity Control (0even,1odd) */
	#define uPD98401_GMR_BPE 0x00000008 /* Bus Parity Enable */
	#define uPD98401_GMR_DR 0x00000004 /* Receive Drop Mode (0drop,1don't)*/
	#define uPD98401_GMR_SE 0x00000002 /* Shapers Enable */
	#define uPD98401_GMR_RE 0x00000001 /* Receiver Enable */

	/* GSR is at 0x01, IMR is at 0x02 */
	#define uPD98401_INT_PI 0x80000000 /* PHY interrupt */
	#define uPD98401_INT_RQA 0x40000000 /* Receive Queue Alert */
	#define uPD98401_INT_RQU 0x20000000 /* Receive Queue Underrun */
	#define uPD98401_INT_RD 0x10000000 /* Receiver Deactivated */
	#define uPD98401_INT_SPE 0x08000000 /* System Parity Error */
	#define uPD98401_INT_CPE 0x04000000 /* Control Memory Parity Error */
	#define uPD98401_INT_SBE 0x02000000 /* System Bus Error */
	#define uPD98401_INT_IND 0x01000000 /* Initialization Done */
	#define uPD98401_INT_RCR 0x0000ff00 /* Raw Cell Received */
	#define uPD98401_INT_RCR_SHIFT 8
	#define uPD98401_INT_MF 0x000000f0 /* Mailbox Full */
	#define uPD98401_INT_MF_SHIFT 4
	#define uPD98401_INT_MM 0x0000000f /* Mailbox Modified */

	/* VER is at 0x06 */
	#define uPD98401_MAJOR 0x0000ff00 /* Major revision */
	#define uPD98401_MAJOR_SHIFT 8
	#define uPD98401_MINOR 0x000000ff /* Minor revision */

	/*
	* Indirectly Addressable Registers
	*/

	#define uPD98401_IM(n) (0x40000+(n)) /* Scheduler n I and M */
	#define uPD98401_X(n) (0x40010+(n)) /* Scheduler n X */
	#define uPD98401_Y(n) (0x40020+(n)) /* Scheduler n Y */
	#define uPD98401_PC(n) (0x40030+(n)) /* Scheduler n P, C, p and c */
	#define uPD98401_PS(n) (0x40040+(n)) /* Scheduler n priority and status */

	/* IM contents */
	#define uPD98401_IM_I 0xff000000 /* I */
	#define uPD98401_IM_I_SHIFT 24
	#define uPD98401_IM_M 0x00ffffff /* M */

	/* PC contents */
	#define uPD98401_PC_P 0xff000000 /* P */
	#define uPD98401_PC_P_SHIFT 24
	#define uPD98401_PC_C 0x00ff0000 /* C */
	#define uPD98401_PC_C_SHIFT 16
	#define uPD98401_PC_p 0x0000ff00 /* p */
	#define uPD98401_PC_p_SHIFT 8
	#define uPD98401_PC_c 0x000000ff /* c */

	/* PS contents */
	#define uPD98401_PS_PRIO 0xf0 /* Priority level (0 high, 15 low) */
	#define uPD98401_PS_PRIO_SHIFT 4
	#define uPD98401_PS_S 0x08 /* Scan - must be 0 (internal) */
	#define uPD98401_PS_R 0x04 /* Round Robin (internal) */
	#define uPD98401_PS_A 0x02 /* Active (internal) */
	#define uPD98401_PS_E 0x01 /* Enabled */

	#define uPD98401_TOS 0x40100 /* Top of Stack Control Memory Address */
	#define uPD98401_SMA 0x40200 /* Shapers Control Memory Start Address */
	#define uPD98401_PMA 0x40201 /* Receive Pool Control Memory Start Address */
	#define uPD98401_T1R 0x40300 /* T1 Register */
	#define uPD98401_VRR 0x40301 /* VPI/VCI Reduction Register/Recv. Shutdown */
	#define uPD98401_TSR 0x40302 /* Time-Stamp Register */

	/* VRR is at 0x40301 */
	#define uPD98401_VRR_SDM 0x80000000 /* Shutdown Mode */
	#define uPD98401_VRR_SHIFT 0x000f0000 /* VPI/VCI Shift */
	#define uPD98401_VRR_SHIFT_SHIFT 16
	#define uPD98401_VRR_MASK 0x0000ffff /* VPI/VCI mask */

	/*
	* TX packet descriptor
	*/

	#define uPD98401_TXPD_SIZE 16 /* descriptor size (in bytes) */

	#define uPD98401_TXPD_V 0x80000000 /* Valid bit */
	#define uPD98401_TXPD_DP 0x40000000 /* Descriptor (1) or Pointer (0) */
	#define uPD98401_TXPD_SM 0x20000000 /* Single (1) or Multiple (0) */
	#define uPD98401_TXPD_CLPM 0x18000000 /* CLP mode */
	#define uPD98401_CLPM_0 0 /* 00 CLP = 0 */
	#define uPD98401_CLPM_1 3 /* 11 CLP = 1 */
	#define uPD98401_CLPM_LAST 1 /* 01 CLP unless last cell */
	#define uPD98401_TXPD_CLPM_SHIFT 27
	#define uPD98401_TXPD_PTI 0x07000000 /* PTI pattern */
	#define uPD98401_TXPD_PTI_SHIFT 24
	#define uPD98401_TXPD_GFC 0x00f00000 /* GFC pattern */
	#define uPD98401_TXPD_GFC_SHIFT 20
	#define uPD98401_TXPD_C10 0x00040000 /* insert CRC-10 */
	#define uPD98401_TXPD_AAL5 0x00020000 /* AAL5 processing */
	#define uPD98401_TXPD_MB 0x00010000 /* TX mailbox number */
	#define uPD98401_TXPD_UU 0x0000ff00 /* CPCS-UU */
	#define uPD98401_TXPD_UU_SHIFT 8
	#define uPD98401_TXPD_CPI 0x000000ff /* CPI */

	/*
	* TX buffer descriptor
	*/

	#define uPD98401_TXBD_SIZE 8 /* descriptor size (in bytes) */

	#define uPD98401_TXBD_LAST 0x80000000 /* last buffer in packet */

	/*
	* TX VC table
	*/

	/* 1st word has the same structure as in a TX packet descriptor */
	#define uPD98401_TXVC_L 0x80000000 /* last buffer */
	#define uPD98401_TXVC_SHP 0x0f000000 /* shaper number */
	#define uPD98401_TXVC_SHP_SHIFT 24
	#define uPD98401_TXVC_VPI 0x00ff0000 /* VPI */
	#define uPD98401_TXVC_VPI_SHIFT 16
	#define uPD98401_TXVC_VCI 0x0000ffff /* VCI */
	#define uPD98401_TXVC_QRP 6 /* Queue Read Pointer is in word 6 */

	/*
	* RX free buffer pools descriptor
	*/

	#define uPD98401_RXFP_ALERT 0x70000000 /* low water mark */
	#define uPD98401_RXFP_ALERT_SHIFT 28
	#define uPD98401_RXFP_BFSZ 0x0f000000 /* buffer size, 642^n /
	#define uPD98401_RXFP_BFSZ_SHIFT 24
	#define uPD98401_RXFP_BTSZ 0x00ff0000 /* batch size, n+1 */
	#define uPD98401_RXFP_BTSZ_SHIFT 16
	#define uPD98401_RXFP_REMAIN 0x0000ffff /* remaining batches in pool */

	/*
	* RX VC table
	*/

	#define uPD98401_RXVC_BTSZ 0xff000000 /* remaining free buffers in batch */
	#define uPD98401_RXVC_BTSZ_SHIFT 24
	#define uPD98401_RXVC_MB 0x00200000 /* RX mailbox number */
	#define uPD98401_RXVC_POOL 0x001f0000 /* free buffer pool number */
	#define uPD98401_RXVC_POOL_SHIFT 16
	#define uPD98401_RXVC_UINFO 0x0000ffff /* user-supplied information */
	#define uPD98401_RXVC_T1 0xffff0000 /* T1 timestamp */
	#define uPD98401_RXVC_T1_SHIFT 16
	#define uPD98401_RXVC_PR 0x00008000 /* Packet Reception, 1 if busy */
	#define uPD98401_RXVC_DR 0x00004000 /* FIFO Drop */
	#define uPD98401_RXVC_OD 0x00001000 /* Drop OAM cells */
	#define uPD98401_RXVC_AR 0x00000800 /* AAL5 or raw cell; 1 if AAL5 */
	#define uPD98401_RXVC_MAXSEG 0x000007ff /* max number of segments per PDU */
	#define uPD98401_RXVC_REM 0xfffe0000 /* remaining words in curr buffer */
	#define uPD98401_RXVC_REM_SHIFT 17
	#define uPD98401_RXVC_CLP 0x00010000 /* CLP received */
	#define uPD98401_RXVC_BFA 0x00008000 /* Buffer Assigned */
	#define uPD98401_RXVC_BTA 0x00004000 /* Batch Assigned */
	#define uPD98401_RXVC_CI 0x00002000 /* Congestion Indication */
	#define uPD98401_RXVC_DD 0x00001000 /* Dropping incoming cells */
	#define uPD98401_RXVC_DP 0x00000800 /* like PR ? */
	#define uPD98401_RXVC_CURSEG 0x000007ff /* Current Segment count */

	/*
	* RX lookup table
	*/

	#define uPD98401_RXLT_ENBL 0x8000 /* Enable */

	#endif