| menu "Infrared-port device drivers" |
| depends on IRDA!=n |
| |
| comment "SIR device drivers" |
| |
| config IRTTY_SIR |
| tristate "IrTTY (uses Linux serial driver)" |
| depends on IRDA && TTY |
| help |
| Say Y here if you want to build support for the IrTTY line |
| discipline. To compile it as a module, choose M here: the module |
| will be called irtty-sir. IrTTY makes it possible to use Linux's |
| own serial driver for all IrDA ports that are 16550 compatible. |
| Most IrDA chips are 16550 compatible so you should probably say Y |
| to this option. Using IrTTY will however limit the speed of the |
| connection to 115200 bps (IrDA SIR mode). |
| |
| If unsure, say Y. |
| |
| config BFIN_SIR |
| tristate "Blackfin SIR on UART" |
| depends on BLACKFIN && IRDA |
| default n |
| help |
| Say Y here if your want to enable SIR function on Blackfin UART |
| devices. |
| |
| To activate this driver you can start irattach like: |
| "irattach irda0 -s" |
| |
| Saying M, it will be built as a module named bfin_sir. |
| |
| Note that you need to turn off one of the serial drivers for SIR |
| to use that UART. |
| |
| config BFIN_SIR0 |
| bool "Blackfin SIR on UART0" |
| depends on BFIN_SIR && !SERIAL_BFIN_UART0 |
| |
| config BFIN_SIR1 |
| bool "Blackfin SIR on UART1" |
| depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561) |
| |
| config BFIN_SIR2 |
| bool "Blackfin SIR on UART2" |
| depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539) |
| |
| config BFIN_SIR3 |
| bool "Blackfin SIR on UART3" |
| depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x) |
| |
| choice |
| prompt "SIR Mode" |
| depends on BFIN_SIR |
| default SIR_BFIN_DMA |
| |
| config SIR_BFIN_DMA |
| bool "DMA mode" |
| depends on !DMA_UNCACHED_NONE |
| |
| config SIR_BFIN_PIO |
| bool "PIO mode" |
| endchoice |
| |
| config SH_SIR |
| tristate "SuperH SIR on UART" |
| depends on IRDA && SUPERH && \ |
| (CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \ |
| CPU_SUBTYPE_SH7724) |
| default n |
| help |
| Say Y here if your want to enable SIR function on SuperH UART |
| devices. |
| |
| comment "Dongle support" |
| |
| config DONGLE |
| bool "Serial dongle support" |
| depends on IRTTY_SIR |
| help |
| Say Y here if you have an infrared device that connects to your |
| computer's serial port. These devices are called dongles. Then say Y |
| or M to the driver for your particular dongle below. |
| |
| Note that the answer to this question won't directly affect the |
| kernel: saying N will just cause the configurator to skip all |
| the questions about serial dongles. |
| |
| config ESI_DONGLE |
| tristate "ESI JetEye PC dongle" |
| depends on IRTTY_SIR && DONGLE && IRDA |
| help |
| Say Y here if you want to build support for the Extended Systems |
| JetEye PC dongle. To compile it as a module, choose M here. The ESI |
| dongle attaches to the normal 9-pin serial port connector, and can |
| currently only be used by IrTTY. To activate support for ESI |
| dongles you will have to start irattach like this: |
| "irattach -d esi". |
| |
| config ACTISYS_DONGLE |
| tristate "ACTiSYS IR-220L and IR220L+ dongle" |
| depends on IRTTY_SIR && DONGLE && IRDA |
| help |
| Say Y here if you want to build support for the ACTiSYS IR-220L and |
| IR220L+ dongles. To compile it as a module, choose M here. The |
| ACTiSYS dongles attaches to the normal 9-pin serial port connector, |
| and can currently only be used by IrTTY. To activate support for |
| ACTiSYS dongles you will have to start irattach like this: |
| "irattach -d actisys" or "irattach -d actisys+". |
| |
| config TEKRAM_DONGLE |
| tristate "Tekram IrMate 210B dongle" |
| depends on IRTTY_SIR && DONGLE && IRDA |
| help |
| Say Y here if you want to build support for the Tekram IrMate 210B |
| dongle. To compile it as a module, choose M here. The Tekram dongle |
| attaches to the normal 9-pin serial port connector, and can |
| currently only be used by IrTTY. To activate support for Tekram |
| dongles you will have to start irattach like this: |
| "irattach -d tekram". |
| |
| config TOIM3232_DONGLE |
| tristate "TOIM3232 IrDa dongle" |
| depends on IRTTY_SIR && DONGLE && IRDA |
| help |
| Say Y here if you want to build support for the Vishay/Temic |
| TOIM3232 and TOIM4232 based dongles. |
| To compile it as a module, choose M here. |
| |
| config LITELINK_DONGLE |
| tristate "Parallax LiteLink dongle" |
| depends on IRTTY_SIR && DONGLE && IRDA |
| help |
| Say Y here if you want to build support for the Parallax Litelink |
| dongle. To compile it as a module, choose M here. The Parallax |
| dongle attaches to the normal 9-pin serial port connector, and can |
| currently only be used by IrTTY. To activate support for Parallax |
| dongles you will have to start irattach like this: |
| "irattach -d litelink". |
| |
| config MA600_DONGLE |
| tristate "Mobile Action MA600 dongle" |
| depends on IRTTY_SIR && DONGLE && IRDA |
| help |
| Say Y here if you want to build support for the Mobile Action MA600 |
| dongle. To compile it as a module, choose M here. The MA600 dongle |
| attaches to the normal 9-pin serial port connector, and can |
| currently only be used by IrTTY. The driver should also support |
| the MA620 USB version of the dongle, if the integrated USB-to-RS232 |
| converter is supported by usbserial. To activate support for |
| MA600 dongle you will have to start irattach like this: |
| "irattach -d ma600". |
| |
| config GIRBIL_DONGLE |
| tristate "Greenwich GIrBIL dongle" |
| depends on IRTTY_SIR && DONGLE && IRDA |
| help |
| Say Y here if you want to build support for the Greenwich GIrBIL |
| dongle. If you want to compile it as a module, choose M here. |
| The Greenwich dongle attaches to the normal 9-pin serial port |
| connector, and can currently only be used by IrTTY. To activate |
| support for Greenwich dongles you will have to start irattach |
| like this: "irattach -d girbil". |
| |
| config MCP2120_DONGLE |
| tristate "Microchip MCP2120" |
| depends on IRTTY_SIR && DONGLE && IRDA |
| help |
| Say Y here if you want to build support for the Microchip MCP2120 |
| dongle. If you want to compile it as a module, choose M here. |
| The MCP2120 dongle attaches to the normal 9-pin serial port |
| connector, and can currently only be used by IrTTY. To activate |
| support for MCP2120 dongles you will have to start irattach |
| like this: "irattach -d mcp2120". |
| |
| You must build this dongle yourself. For more information see: |
| <http://www.eyetap.org/~tangf/irda_sir_linux.html> |
| |
| config OLD_BELKIN_DONGLE |
| tristate "Old Belkin dongle" |
| depends on IRTTY_SIR && DONGLE && IRDA |
| help |
| Say Y here if you want to build support for the Adaptec Airport 1000 |
| and 2000 dongles. If you want to compile it as a module, choose |
| M here. Some information is contained in the comments |
| at the top of <file:drivers/net/irda/old_belkin-sir.c>. |
| |
| config ACT200L_DONGLE |
| tristate "ACTiSYS IR-200L dongle" |
| depends on IRTTY_SIR && DONGLE && IRDA |
| help |
| Say Y here if you want to build support for the ACTiSYS IR-200L |
| dongle. If you want to compile it as a module, choose M here. |
| The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial |
| port connector, and can currently only be used by IrTTY. |
| To activate support for ACTiSYS IR-200L dongle you will have to |
| start irattach like this: "irattach -d act200l". |
| |
| config KINGSUN_DONGLE |
| tristate "KingSun/DonShine DS-620 IrDA-USB dongle" |
| depends on IRDA && USB |
| help |
| Say Y or M here if you want to build support for the KingSun/DonShine |
| DS-620 IrDA-USB bridge device driver. |
| |
| This USB bridge does not conform to the IrDA-USB device class |
| specification, and therefore needs its own specific driver. This |
| dongle supports SIR speed only (9600 bps). |
| |
| To compile it as a module, choose M here: the module will be called |
| kingsun-sir. |
| |
| config KSDAZZLE_DONGLE |
| tristate "KingSun Dazzle IrDA-USB dongle" |
| depends on IRDA && USB |
| help |
| Say Y or M here if you want to build support for the KingSun Dazzle |
| IrDA-USB bridge device driver. |
| |
| This USB bridge does not conform to the IrDA-USB device class |
| specification, and therefore needs its own specific driver. This |
| dongle supports SIR speeds only (9600 through 115200 bps). |
| |
| To compile it as a module, choose M here: the module will be called |
| ksdazzle-sir. |
| |
| config KS959_DONGLE |
| tristate "KingSun KS-959 IrDA-USB dongle" |
| depends on IRDA && USB |
| help |
| Say Y or M here if you want to build support for the KingSun KS-959 |
| IrDA-USB bridge device driver. |
| |
| This USB bridge does not conform to the IrDA-USB device class |
| specification, and therefore needs its own specific driver. This |
| dongle supports SIR speeds only (9600 through 57600 bps). |
| |
| To compile it as a module, choose M here: the module will be called |
| ks959-sir. |
| |
| comment "FIR device drivers" |
| |
| config USB_IRDA |
| tristate "IrDA USB dongles" |
| depends on IRDA && USB |
| select FW_LOADER |
| ---help--- |
| Say Y here if you want to build support for the USB IrDA FIR Dongle |
| device driver. To compile it as a module, choose M here: the module |
| will be called irda-usb. IrDA-USB support the various IrDA USB |
| dongles available and most of their peculiarities. Those dongles |
| plug in the USB port of your computer, are plug and play, and |
| support SIR and FIR (4Mbps) speeds. On the other hand, those |
| dongles tend to be less efficient than a FIR chipset. |
| |
| Please note that the driver is still experimental. And of course, |
| you will need both USB and IrDA support in your kernel... |
| |
| config SIGMATEL_FIR |
| tristate "SigmaTel STIr4200 bridge" |
| depends on IRDA && USB |
| select CRC32 |
| ---help--- |
| Say Y here if you want to build support for the SigmaTel STIr4200 |
| USB IrDA FIR bridge device driver. |
| |
| USB bridge based on the SigmaTel STIr4200 don't conform to the |
| IrDA-USB device class specification, and therefore need their |
| own specific driver. Those dongles support SIR and FIR (4Mbps) |
| speeds. |
| |
| To compile it as a module, choose M here: the module will be called |
| stir4200. |
| |
| config NSC_FIR |
| tristate "NSC PC87108/PC87338" |
| depends on IRDA && ISA_DMA_API |
| help |
| Say Y here if you want to build support for the NSC PC87108 and |
| PC87338 IrDA chipsets. This driver supports SIR, |
| MIR and FIR (4Mbps) speeds. |
| |
| To compile it as a module, choose M here: the module will be called |
| nsc-ircc. |
| |
| config WINBOND_FIR |
| tristate "Winbond W83977AF (IR)" |
| depends on IRDA && ISA_DMA_API |
| help |
| Say Y here if you want to build IrDA support for the Winbond |
| W83977AF super-io chipset. This driver should be used for the IrDA |
| chipset in the Corel NetWinder. The driver supports SIR, MIR and |
| FIR (4Mbps) speeds. |
| |
| To compile it as a module, choose M here: the module will be called |
| w83977af_ir. |
| |
| config TOSHIBA_FIR |
| tristate "Toshiba Type-O IR Port" |
| depends on IRDA && PCI && !64BIT && VIRT_TO_BUS |
| help |
| Say Y here if you want to build support for the Toshiba Type-O IR |
| and Donau oboe chipsets. These chipsets are used by the Toshiba |
| Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops. |
| To compile it as a module, choose M here: the module will be called |
| donauboe. |
| |
| config AU1000_FIR |
| tristate "Alchemy IrDA SIR/FIR" |
| depends on IRDA && MIPS_ALCHEMY |
| help |
| Say Y/M here to build support the IrDA peripheral on the |
| Alchemy Au1000 and Au1100 SoCs. |
| Say M to build a module; it will be called au1k_ir.ko |
| |
| config SMC_IRCC_FIR |
| tristate "SMSC IrCC" |
| depends on IRDA && ISA_DMA_API |
| help |
| Say Y here if you want to build support for the SMC Infrared |
| Communications Controller. It is used in a wide variety of |
| laptops (Fujitsu, Sony, Compaq and some Toshiba). |
| To compile it as a module, choose M here: the module will be called |
| smsc-ircc2.o. |
| |
| config ALI_FIR |
| tristate "ALi M5123 FIR" |
| depends on IRDA && ISA_DMA_API |
| help |
| Say Y here if you want to build support for the ALi M5123 FIR |
| Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C, |
| M1535, M1535D, M1535+, M1535D South Bridge. This driver supports |
| SIR, MIR and FIR (4Mbps) speeds. |
| |
| To compile it as a module, choose M here: the module will be called |
| ali-ircc. |
| |
| config VLSI_FIR |
| tristate "VLSI 82C147 SIR/MIR/FIR" |
| depends on IRDA && PCI |
| help |
| Say Y here if you want to build support for the VLSI 82C147 |
| PCI-IrDA Controller. This controller is used by the HP OmniBook 800 |
| and 5500 notebooks. The driver provides support for SIR, MIR and |
| FIR (4Mbps) speeds. |
| |
| To compile it as a module, choose M here: the module will be called |
| vlsi_ir. |
| |
| config SA1100_FIR |
| tristate "SA1100 Internal IR" |
| depends on ARCH_SA1100 && IRDA && DMA_SA11X0 |
| |
| config VIA_FIR |
| tristate "VIA VT8231/VT1211 SIR/MIR/FIR" |
| depends on IRDA && ISA_DMA_API |
| help |
| Say Y here if you want to build support for the VIA VT8231 |
| and VIA VT1211 IrDA controllers, found on the motherboards using |
| those VIA chipsets. To use this controller, you will need |
| to plug a specific 5 pins FIR IrDA dongle in the specific |
| motherboard connector. The driver provides support for SIR, MIR |
| and FIR (4Mbps) speeds. |
| |
| You will need to specify the 'dongle_id' module parameter to |
| indicate the FIR dongle attached to the controller. |
| |
| To compile it as a module, choose M here: the module will be called |
| via-ircc. |
| |
| config PXA_FICP |
| tristate "Intel PXA2xx Internal FICP" |
| depends on ARCH_PXA && IRDA |
| help |
| Say Y or M here if you want to build support for the PXA2xx |
| built-in IRDA interface which can support both SIR and FIR. |
| This driver relies on platform specific helper routines so |
| available capabilities may vary from one PXA2xx target to |
| another. |
| |
| config MCS_FIR |
| tristate "MosChip MCS7780 IrDA-USB dongle" |
| depends on IRDA && USB |
| select CRC32 |
| help |
| Say Y or M here if you want to build support for the MosChip |
| MCS7780 IrDA-USB bridge device driver. |
| |
| USB bridge based on the MosChip MCS7780 don't conform to the |
| IrDA-USB device class specification, and therefore need their |
| own specific driver. Those dongles support SIR and FIR (4Mbps) |
| speeds. |
| |
| To compile it as a module, choose M here: the module will be called |
| mcs7780. |
| |
| config SH_IRDA |
| tristate "SuperH IrDA driver" |
| depends on IRDA |
| depends on (ARCH_SHMOBILE || COMPILE_TEST) && HAS_IOMEM |
| help |
| Say Y here if your want to enable SuperH IrDA devices. |
| |
| endmenu |
| |
